-
Differential diffusion effects and super-adiabatic local temperature in lean hydrogen-air turbulent flames
Authors:
H. C. Lee,
P. Dai,
M. Wan,
Andrei N. Lipatnikov
Abstract:
Analyzed in this paper are three-dimensional Direct Numerical Simulation (DNS) data obtained from seven statistically planar and one-dimensional, lean complex-chemistry hydrogen-air flames propagating in a box with forced turbulence. The simulation conditions cover a wide range of non-dimensional turbulent combustion characteristics. Specifically, root-mean-square turbulent velocity is varied from…
▽ More
Analyzed in this paper are three-dimensional Direct Numerical Simulation (DNS) data obtained from seven statistically planar and one-dimensional, lean complex-chemistry hydrogen-air flames propagating in a box with forced turbulence. The simulation conditions cover a wide range of non-dimensional turbulent combustion characteristics. Specifically, root-mean-square turbulent velocity is varied from 2.2 to 54 laminar flame speeds, integral length scale of turbulence is varied from 0.5 to 2.2 laminar flame thicknesses, Damköhler and Karlovitz number are varied from 0.01 to 0.53 and from 10 to 1315, respectively. Two equivalence ratios, 0.5 and 0.35, are explored. Turbulent burning velocities are evaluated for these seven low Lewis number flames and equidiffusion counterparts to six of them. Moreover, conditioned profiles of temperature, fuel consumption and heat release rates and probabilities of finding superadiabatic temperature are sampled from all seven low Lewis number flames. Analyses of obtained results show that both magnitude of superadiabatic temperature and probability of finding it are decreased with increasing Karlovitz number Ka. However, significant influence of differential diffusion effects on local structure of flame reaction zones and bulk burning velocity is well pronounced in all cases, even at Ka as high as 1315. Therefore, a decrease in magnitude of superadiabatic local temperature with increasing Karlovitz number or even negligible probability of finding such a high temperature at high Ka is not an evidence that differential diffusion effects play a minor role under such conditions. The simulated mitigation of phenomenon of superadiabatic temperature at high Ka is attributed to intensification of turbulent mixing in local flame oxidation zones, rather than weakening differential diffusion effects in local flame reaction zones.
△ Less
Submitted 8 April, 2025;
originally announced April 2025.
-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Acceleration without Disruption: DFT Software as a Service
Authors:
Fusong Ju,
Xinran Wei,
Lin Huang,
Andrew J. Jenkins,
Leo Xia,
Jia Zhang,
Jianwei Zhu,
Han Yang,
Bin Shao,
Peggy Dai,
Ashwin Mayya,
Zahra Hooshmand,
Alexandra Efimovskaya,
Nathan A. Baker,
Matthias Troyer,
Hongbin Liu
Abstract:
Density functional theory (DFT) has been a cornerstone in computational chemistry, physics, and materials science for decades, benefiting from advancements in computational power and theoretical methods. This paper introduces a novel, cloud-native application, Accelerated DFT, which offers an order of magnitude acceleration in DFT simulations. By integrating state-of-the-art cloud infrastructure a…
▽ More
Density functional theory (DFT) has been a cornerstone in computational chemistry, physics, and materials science for decades, benefiting from advancements in computational power and theoretical methods. This paper introduces a novel, cloud-native application, Accelerated DFT, which offers an order of magnitude acceleration in DFT simulations. By integrating state-of-the-art cloud infrastructure and redesigning algorithms for graphic processing units (GPUs), Accelerated DFT achieves high-speed calculations without sacrificing accuracy. It provides an accessible and scalable solution for the increasing demands of DFT calculations in scientific communities. The implementation details, examples, and benchmark results illustrate how Accelerated DFT can significantly expedite scientific discovery across various domains.
△ Less
Submitted 16 June, 2024;
originally announced June 2024.
-
Correlations among physical properties of pervious concrete with different aggregate sizes and mix proportions
Authors:
Qifeng Lyu,
Pengfei Dai,
Anguo Chen
Abstract:
Permeable pavement material can benefit urban environment. Here in this work, different aggregate sizes and mix proportions were used to manufacture pervious pavement concrete and investigate correlations among its properties. The porosity, permeability, compressive strength, inner structure, thermal conductivity, and abrasion resistance of the specimens were obtained. Results showed lower aggrega…
▽ More
Permeable pavement material can benefit urban environment. Here in this work, different aggregate sizes and mix proportions were used to manufacture pervious pavement concrete and investigate correlations among its properties. The porosity, permeability, compressive strength, inner structure, thermal conductivity, and abrasion resistance of the specimens were obtained. Results showed lower aggregate-to-cement ratios and higher water-to-cement ratios led to porosity reduction, which decreased the permeability coefficient but increased the compressive strength, thermal conductivity, and abrasion resistance of the pervious concrete. Compared to the mixes, the aggregate sizes affected the physical properties of pervious concrete less. However, the sizes of pores and cement in the pervious concrete were more affected by aggregate sizes than by mixes. Moreover, the porosity, permeability coefficient, and compressive strength of the pervious concrete can be correlated by the power law, whereas the correlation between the porosity and abrasion resistance index can be fitted by a linear law.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Fluids flow in granular aggregate packings reconstructed by high-energy X-ray computed tomography and lattice Boltzmann method
Authors:
Qifeng Lyu,
Anguo Chen,
Jie Jia,
Amardeep Singh,
Pengfei Dai
Abstract:
Properties of fluids flow in granular aggregates are important for the design of pervious infrastructures used to alleviate urban water-logging problems. Here in this work, five groups of aggregates packing with similar average porosities but varying particle sizes were scanned by a high-energy X-ray computed tomography (X-CT) facility. The structures of the packings were reconstructed. Porosities…
▽ More
Properties of fluids flow in granular aggregates are important for the design of pervious infrastructures used to alleviate urban water-logging problems. Here in this work, five groups of aggregates packing with similar average porosities but varying particle sizes were scanned by a high-energy X-ray computed tomography (X-CT) facility. The structures of the packings were reconstructed. Porosities were calculated and compared with those measured by the volume and mass of infilled water in the packing. Then pore networks were extracted and analyzed. Simulations of fluids flow in the packings were performed by using a lattice Boltzmann method (LBM) with BGK (Bhatnagar-Gross-Krook) collision model in the pore-network domain of the packings. Results showed wall effect on the porosity of aggregates packing was significant and the influence increased with the aggregate sizes. In addition, Poisson law and power law can be used to fit the coordination number and coordination volume of the packing's pore network, respectively. Moreover, the mass flow rates of fluids in the aggregates were affected by the porosities. On the two-dimensional slices, the mass flow rate decreased when the slice porosity increased. But for the three-dimensional blocks, the average mass flow rate increased with the volume porosity. And the permeability of the aggregates packing showed correlating change trend with the average pore diameter and fitting parameters of coordination volumes, when the sizes of aggregates changed. Though the limitation of merging interfaces causing fluctuation and discontinuity on micro parameters of fluid flow existed, the methods and results here may provide knowledge and insights for numerical simulations and optimal design of aggregate-based materials.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Transition from turbulence-dominated to instability-dominated combustion regime in lean hydrogen-air flames
Authors:
Hsu Chew Lee,
Peng Dai,
Minping Wan,
Vladimir A. Sabelnikov,
Andrei N. Lipatnikov
Abstract:
Recent complex-chemistry direct numerical simulations of lean hydrogen-air flames propagating in forced turbulence in a box were continued by switching-off the turbulence forcing. Results show that a decrease in burning velocity U_T(t), caused by the turbulence decay, is reversed when the turbulence becomes weak and a peak of U_T(t) appears, with the peak magnitudes and associated Karlovitz number…
▽ More
Recent complex-chemistry direct numerical simulations of lean hydrogen-air flames propagating in forced turbulence in a box were continued by switching-off the turbulence forcing. Results show that a decrease in burning velocity U_T(t), caused by the turbulence decay, is reversed when the turbulence becomes weak and a peak of U_T(t) appears, with the peak magnitudes and associated Karlovitz numbers being similar in two different cases. These results (i) are attributed to activation of laminar flame instabilities, which have been suppressed by intense turbulence, and (ii) are argued to indicate that the instabilities can substantially affect U_T in sufficiently weak turbulence only.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Turbulent burning velocity and thermo-diffusive instability of premixed flames
Authors:
HsuChew Lee,
BuChen Wu,
Peng Dai,
Minping Wan,
Andrei Lipatnikov
Abstract:
Reported in the paper are results of unsteady three-dimensional direct numerical simulations of laminar and turbulent, lean hydrogen-air, complex-chemistry flames propagating in forced turbulence in a box. To explore the eventual influence of thermo-diffusive instability of laminar flames on turbulent burning velocity, (i) a critical length scale Λn that bounds regimes of unstable and stable lamin…
▽ More
Reported in the paper are results of unsteady three-dimensional direct numerical simulations of laminar and turbulent, lean hydrogen-air, complex-chemistry flames propagating in forced turbulence in a box. To explore the eventual influence of thermo-diffusive instability of laminar flames on turbulent burning velocity, (i) a critical length scale Λn that bounds regimes of unstable and stable laminar combustion is numerically determined by gradually decreasing the width Λ of computational domain until a stable laminar flame is obtained and (ii) simulations of turbulent flames are performed by varying the width from Λ < Λn (in this case, the instability is suppressed) to Λ > Λn (in this case, the instability may grow). Moreover, simulations are performed either using mixture-averaged transport properties (low Lewis number flames) or setting diffusivities of all species equal to heat diffusivity of the mixture (equidiffusive flames), with all other things being equal. Obtained results show a significant increase in turbulent burning velocity UT when the boundary Λ = Λn is crossed in weak turbulence, but almost equal values of UT are computed at Λ < Λn and Λ > Λn in moderately turbulent flames characterized by Karlovitz number equal to 3.4 or larger. These results imply that thermo-diffusive instability of laminar premixed flames substantially affects burning velocity in weak turbulence only, in line with a simple criterion proposed by Chomiak and Lipatnikov (Phys. Rev. E 107, 015102, 2023).
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Autoignition and detonation development from a hot spot inside a closed chamber: effects of end wall reflection
Authors:
Peng Dai,
Zheng Chen,
Xiaohua Gan,
Mikhail A. Liberman
Abstract:
The advancement of highly boosted internal combustion engines (ICEs) with high thermal efficiency is mainly constrained by knock and super-knock respectively due to the end gas autoignition and detonation development. At the end of the compression stroke, the pressure wave propagation and reflection in a small confined space may greatly influence the end gas autoignition, leading to different auto…
▽ More
The advancement of highly boosted internal combustion engines (ICEs) with high thermal efficiency is mainly constrained by knock and super-knock respectively due to the end gas autoignition and detonation development. At the end of the compression stroke, the pressure wave propagation and reflection in a small confined space may greatly influence the end gas autoignition, leading to different autoignition characteristics from those in a large or open space. The present study investigates the transient autoignition process in an iso-octane/air mixture inside a closed chamber under engine-relevant conditions. The emphasis is given to the assessing effects of the pressure wave-wall reflection and the mechanism of extremely strong pressure oscillations typical for super-knock. It is found that the hot spot induced autoignition in a closed chamber can be greatly affected by shock/pressure wave reflection from the end wall. Different autoignition modes respectively from the hot spot and end wall reflection are identified. A non-dimensional parameter quantifying the interplay between different length and time scales is introduced, which helps to identify different autoignition regimes including detonation development near the end wall. It is shown that detonation development from the hot spot may cause super-knock with devastating pressure oscillation. However, the detonation development from the end wall can hardly produce pressure oscillation strong enough for the super-knock. The obtained results provide a fundamental insight into the knocking mechanism in engines under highly boosted conditions.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Luminosity measurements for the R scan experiment at BESIII
Authors:
M. Ablikim,
M. N. Achasov,
S. Ahmed,
X. C. Ai,
O. Albayrak,
M. Albrecht,
D. J. Ambrose,
A. Amoroso,
F. F. An,
Q. An,
J. Z. Bai,
O. Bakina,
R. Baldini Ferroli,
Y. Ban,
D. W. Bennett,
J. V. Bennett,
N. Berger,
M. Bertani,
D. Bettoni,
J. M. Bian,
F. Bianchi,
E. Boger,
I. Boyko,
R. A. Briere,
H. Cai
, et al. (405 additional authors not shown)
Abstract:
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measur…
▽ More
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements.
△ Less
Submitted 11 February, 2017;
originally announced February 2017.
-
Measurements of Baryon Pair Decays of $χ_{cJ}$ Mesons
Authors:
M. Ablikim,
M. N. Achasov,
O. Albayrak,
D. J. Ambrose,
F. F. An,
Q. An,
J. Z. Bai,
Y. Ban,
J. Becker,
J. V. Bennett,
M. Bertani,
J. M. Bian,
E. Boger,
O. Bondarenko,
I. Boyko,
R. A. Briere,
V. Bytev,
X. Cai,
O. Cakir,
A. Calcaterra,
G. F. Cao,
S. A. Cetin,
J. F. Chang,
G. Chelkov,
G. Chen
, et al. (326 additional authors not shown)
Abstract:
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$,…
▽ More
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$, $(20.8 \pm 1.6 \pm 2.3)\times 10^{-5}$; $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{0}\barΣ^{0})$ = $(47.8 \pm 3.4 \pm 3.9)\times 10^{-5}$, $(3.8 \pm 1.0 \pm 0.5)\times 10^{-5}$, $(4.0 \pm 1.1 \pm 0.5) \times 10^{-5}$; and $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{+}\barΣ^{-})$ = $(45.4 \pm 4.2 \pm 3.0)\times 10^{-5}$, $(5.4 \pm 1.5 \pm 0.5)\times 10^{-5}$, $(4.9 \pm 1.9 \pm 0.7)\times 10^{-5}$, where the first error is statistical and the second is systematic. Upper limits on the branching fractions for the decays of $χ_{c1,2}\rightarrowΣ^{0}\barΣ^{0}$, $Σ^{+}\barΣ^{-}$, are estimated to be $\cal{B}$$(χ_{c1}\rightarrowΣ^{0}\barΣ^{0}) < 6.2\times 10^{-5}$, $\cal{B}$$(χ_{c2}\rightarrowΣ^{0}\barΣ^{0}) < 6.5\times 10^{-5}$, $\cal{B}$$(χ_{c1}\rightarrowΣ^{+}\barΣ^{-}) < 8.7\times 10^{-5}$ and $\cal{B}$$(χ_{c2}\rightarrowΣ^{+}\barΣ^{-}) < 8.8\times 10^{-5}$ at the 90% confidence level.
△ Less
Submitted 4 March, 2013; v1 submitted 9 November, 2012;
originally announced November 2012.
