-
Comparison of the Baseline and the Minimal Steel Yoke Superconducting Magnets for the Future Circular Hadron-Hadron Collider
Authors:
V. I. Klyukhin,
A. Ball,
C. P. Berriaud,
E. Bielert,
B. Curé,
A. Dudarev,
A. Gaddi,
H. Gerwig,
A. Hervé,
M. Mentink,
H. Pais Da Silva,
U. Wagner,
H. H. J. Ten Kate
Abstract:
The conceptual design study of a hadron Future Circular hadron-hadron Collider (FCC-hh) with a center-of-mass energy of the order of 100 TeV assumes using in the experimental detector the superconducting magnetic system with a central magnetic flux density of an order of 4 T. A superconducting magnet with a minimal steel yoke was proposed as an alternative to the baseline iron-free solenoids. In a…
▽ More
The conceptual design study of a hadron Future Circular hadron-hadron Collider (FCC-hh) with a center-of-mass energy of the order of 100 TeV assumes using in the experimental detector the superconducting magnetic system with a central magnetic flux density of an order of 4 T. A superconducting magnet with a minimal steel yoke was proposed as an alternative to the baseline iron-free solenoids. In a present study, both designs are modeled with Cobham's program TOSCA and compared. All the main parameters are discussed.
△ Less
Submitted 18 January, 2022;
originally announced January 2022.
-
Performance evaluation in the reconstruction of 2D images of computed tomography using massively parallel programming CUDA
Authors:
Alexssandro Ferreira Cordeiro,
Pedro Luiz de Paula Filho,
Hamilton Pereira da Silva,
Arnaldo Candido Junior,
Edresson Casanova,
Jandrei Sartori Spancerski
Abstract:
Analysis of processing time and similarity of images generated between CPU and GPU architectures and sequential and parallel programming. For image processing a computer with AMD FX-8350 processor and an Nvidia GTX 960 Maxwell GPU was used, along with the CUDAFY library and the programming language C\# with the IDE Visual studio. The results of the comparisons indicate that the form of sequential…
▽ More
Analysis of processing time and similarity of images generated between CPU and GPU architectures and sequential and parallel programming. For image processing a computer with AMD FX-8350 processor and an Nvidia GTX 960 Maxwell GPU was used, along with the CUDAFY library and the programming language C\# with the IDE Visual studio. The results of the comparisons indicate that the form of sequential programming in a CPU generates reliable images at a high custom of time when compared to the forms of parallel programming in CPU and GPU. While parallel programming generates faster results, but with increased noise in the reconstructed image. For data types float a GPU obtained best result with average time equivalent to 1/3 of the processor, however the data is of type double the parallel CPU approach obtained the best performance. For the float data type, the GPU had the best average time performance, while for the double data type the best average time performance was for the parallel approach CPU. Regarding image quality, the sequential approach obtained similar outputs, while the parallel approaches generated noise in their outputs.
△ Less
Submitted 5 September, 2021;
originally announced September 2021.
-
Conceptual Design of BabyIAXO, the intermediate stage towards the International Axion Observatory
Authors:
A. Abeln,
K. Altenmüller,
S. Arguedas Cuendis,
E. Armengaud,
D. Attié,
S. Aune,
S. Basso,
L. Bergé,
B. Biasuzzi,
P. T. C. Borges De Sousa,
P. Brun,
N. Bykovskiy,
D. Calvet,
J. M. Carmona,
J. F. Castel,
S. Cebrián,
V. Chernov,
F. E. Christensen,
M. M. Civitani,
C. Cogollos,
T. Dafní,
A. Derbin,
K. Desch,
D. Díez,
M. Dinter
, et al. (101 additional authors not shown)
Abstract:
This article describes BabyIAXO, an intermediate experimental stage of the International Axion Observatory (IAXO), proposed to be sited at DESY. IAXO is a large-scale axion helioscope that will look for axions and axion-like particles (ALPs), produced in the Sun, with unprecedented sensitivity. BabyIAXO is conceived to test all IAXO subsystems (magnet, optics and detectors) at a relevant scale for…
▽ More
This article describes BabyIAXO, an intermediate experimental stage of the International Axion Observatory (IAXO), proposed to be sited at DESY. IAXO is a large-scale axion helioscope that will look for axions and axion-like particles (ALPs), produced in the Sun, with unprecedented sensitivity. BabyIAXO is conceived to test all IAXO subsystems (magnet, optics and detectors) at a relevant scale for the final system and thus serve as prototype for IAXO, but at the same time as a fully-fledged helioscope with relevant physics reach itself, and with potential for discovery. The BabyIAXO magnet will feature two 10 m long, 70 cm diameter bores, and will host two detection lines (optics and detector) of dimensions similar to the final ones foreseen for IAXO. BabyIAXO will detect or reject solar axions or ALPs with axion-photon couplings down to $g_{aγ} \sim 1.5 \times 10^{-11}$ GeV$^{-1}$, and masses up to $m_a\sim 0.25$ eV. BabyIAXO will offer additional opportunities for axion research in view of IAXO, like the development of precision x-ray detectors to identify particular spectral features in the solar axion spectrum, and the implementation of radiofrequency-cavity-based axion dark matter setups.
△ Less
Submitted 4 March, 2021; v1 submitted 22 October, 2020;
originally announced October 2020.
-
Baby MIND: A magnetized segmented neutrino detector for the WAGASCI experiment
Authors:
M. Antonova,
R. Asfandiyarov,
R. Bayes,
P. Benoit,
A. Blondel,
M. Bogomilov,
A. Bross,
F. Cadoux,
A. Cervera,
N. Chikuma,
A. Dudarev,
T. Ekelöf,
Y. Favre,
S. Fedotov,
S-P. Hallsjö,
A. Izmaylov,
Y. Karadzhov,
M. Khabibullin,
A. Khotyantsev,
A. Kleymenova,
T. Koga,
A. Kostin,
Y. Kudenko,
V. Likhacheva,
B. Martinez
, et al. (21 additional authors not shown)
Abstract:
T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280~m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at…
▽ More
T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280~m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295~km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper.
△ Less
Submitted 16 July, 2017; v1 submitted 29 May, 2017;
originally announced May 2017.
-
Baby MIND Experiment Construction Status
Authors:
M. Antonova,
R. Asfandiyarov,
R Bayes,
P. Benoit,
A. Blondel,
M. Bogomilov,
A. Bross,
F. Cadoux,
A. Cervera,
N. Chikuma,
A. Dudarev,
T. Ekelöf,
Y. Favre,
S. Fedotov,
S-P. Hallsjö,
A. Izmaylov,
Y. Karadzhov,
M. Khabibullin,
A. Khotyantsev,
A. Kleymenova,
T. Koga,
A. Kostin,
Y. Kudenko,
V. Likhacheva,
B. Martinez
, et al. (21 additional authors not shown)
Abstract:
Baby MIND is a magnetized iron neutrino detector, with novel design features, and is planned to serve as a downstream magnetized muon spectrometer for the WAGASCI experiment on the T2K neutrino beam line in Japan. One of the main goals of this experiment is to reduce systematic uncertainties relevant to CP-violation searches, by measuring the neutrino contamination in the anti-neutrino beam mode o…
▽ More
Baby MIND is a magnetized iron neutrino detector, with novel design features, and is planned to serve as a downstream magnetized muon spectrometer for the WAGASCI experiment on the T2K neutrino beam line in Japan. One of the main goals of this experiment is to reduce systematic uncertainties relevant to CP-violation searches, by measuring the neutrino contamination in the anti-neutrino beam mode of T2K. Baby MIND is currently being constructed at CERN, and is planned to be operational in Japan in October 2017.
△ Less
Submitted 28 April, 2017;
originally announced April 2017.
-
Baby MIND: A magnetised spectrometer for the WAGASCI experiment
Authors:
M. Antonova,
R. Asfandiyarov,
R Bayes,
P. Benoit,
A. Blondel,
M. Bogomilov,
A. Cross,
F. Cadoux,
A. Cervera,
N. Chikuma,
A. Dudarev,
T. Ekelöf,
Y. Favre,
S. Fedotov,
S-P. Hallsjö,
A. Izmaylov,
Y. Karadzhov,
M. Khabibullin,
A. Khotyantsev,
A. Kleymenova,
T. Koga,
A. Kostin,
Y. Kudenko,
V. Likhacheva,
B. Martinez
, et al. (21 additional authors not shown)
Abstract:
The WAGASCI experiment being built at the J-PARC neutrino beam line will measure the difference in cross sections from neutrinos interacting with a water and scintillator targets, in order to constrain neutrino cross sections, essential for the T2K neutrino oscillation measurements. A prototype Magnetised Iron Neutrino Detector (MIND), called Baby MIND, is being constructed at CERN to act as a mag…
▽ More
The WAGASCI experiment being built at the J-PARC neutrino beam line will measure the difference in cross sections from neutrinos interacting with a water and scintillator targets, in order to constrain neutrino cross sections, essential for the T2K neutrino oscillation measurements. A prototype Magnetised Iron Neutrino Detector (MIND), called Baby MIND, is being constructed at CERN to act as a magnetic spectrometer behind the main WAGASCI target to be able to measure the charge and momentum of the outgoing muon from neutrino charged current interactions.
△ Less
Submitted 26 April, 2017;
originally announced April 2017.
-
Superconducting Magnet with a Minimal Steel Yoke for the Future Circular Collider Detector
Authors:
V. I. Klyukhin,
A. Hervé,
A. Ball,
B. Curé,
A. Dudarev,
A. Gaddi,
H. Gerwig,
M. Mentink,
H. Pais Da Silva,
G. Rolando,
H. H. J. Ten Kate,
C. P. Berriaud
Abstract:
The conceptual design study of a Future Circular hadron-hadron Collider (FCC-hh) with a center-of-mass energy of the order of 100 TeV, assumed to be constructed in a new tunnel of 80-100 km circumference, includes the determination of the basic requirements for its detectors. A superconducting solenoid magnet of 12-m-diameter inner bore with the central magnetic flux density of 6 T, in combination…
▽ More
The conceptual design study of a Future Circular hadron-hadron Collider (FCC-hh) with a center-of-mass energy of the order of 100 TeV, assumed to be constructed in a new tunnel of 80-100 km circumference, includes the determination of the basic requirements for its detectors. A superconducting solenoid magnet of 12-m-diameter inner bore with the central magnetic flux density of 6 T, in combination with two superconducting dipole magnets and two conventional toroid magnets is proposed for an FCC-hh experimental setup. The coil of 23.468 m length has seven 3.35-m-long modules included into one cryostat. The steel yoke with a mass of 22.6 kt consists of two barrel layers of 0.5 m radial thickness and a 0.7-m-thick nose disk and four 0.6-m-thick end-cap disks each side. The outer diameter of the yoke is 17.7 m. The full length of the magnetic system is 62.6 m. The air gaps between the end-cap disks provide for the installation of the muon chambers up to an absolute pseudorapidity about 2.7. The superconducting dipole magnets provide measurement of charged particle momenta in the absolute pseudorapidity region greater than 3. The conventional forward muon spectrometer allows muon identification in the absolute pseudorapidity region from 2.7 to 5. The magnet is modeled with the program TOSCA from Cobham CTS Limited. The total current in the superconducting solenoid coil is 123 MA-turns; the stored energy is 41.8 GJ. The axial force acting on each end-cap is 450 MN. The stray field is 13.7 mT at a radius of 50 m from the coil axis, and 5.2 mT at a radius of 100 m. Many other parameters are presented and discussed.
△ Less
Submitted 8 August, 2016; v1 submitted 27 May, 2016;
originally announced May 2016.
