-
Reconfigurable Integrated Photonic Chips as Dual-Purpose Neuromorphic Accelerators and Physical Unclonable Functions
Authors:
George Sarantoglou,
Francesco Da Ros,
Kostas Sozos,
Adonis Bogris,
Charis Mesaritakis
Abstract:
In this work, we experimentally validate the dual use of a reconfigurable photonic integrated mesh as a neuromorphic accelerator, targeting signal equalization, and as a physical unclonable function offering authentication at the hardware level. The processing node is an optical spectrum slicing self-coherent transceiver targeting the mitigation of dispersion impairments of an intensity detected Q…
▽ More
In this work, we experimentally validate the dual use of a reconfigurable photonic integrated mesh as a neuromorphic accelerator, targeting signal equalization, and as a physical unclonable function offering authentication at the hardware level. The processing node is an optical spectrum slicing self-coherent transceiver targeting the mitigation of dispersion impairments of an intensity detected QPSK signal, after 25 km of transmission at 32 Gbaud. Unavoidable fabrication related imperfections of the nodes, such as waveguide roughness, can act as fingerprints of the device, and, during neuromorphic processing, result in unique weights at the digital back-end during signal equalization. Extracted security metrics offer low false positive/negative probability for the generated responses, confirming un-clonability, whereas bit-error-ratio for the QPSK equalization task was always below the hardware forward error correction limit. The experimental results substantiate the capability of the proposed scheme to simultaneously act as an accelerator and as a security token.
△ Less
Submitted 16 May, 2025;
originally announced May 2025.
-
Experimental Analysis of a Self-Coherent M-QAM Receiver by Means of Recurrent Optical Spectrum Slicing and Direct Detection
Authors:
Kostas Sozos,
Francesco Da Ros,
Senior Member Optica,
Metodi Yankov,
Stavros Deligiannidis,
George Sarantoglou,
Charis Mesaritakis,
Adonis Bogris,
Fellow Optica
Abstract:
High order modulation formats constitute the most prominent way for increasing spectral efficiency in transmission systems. Coherent transceivers that support such higher order formats require heavy digital signal processing (DSP), which increases the power consumption of coherent pluggables, well above the intensity modulation and direct detection (IM/DD) counterparts. Self-coherent or phase retr…
▽ More
High order modulation formats constitute the most prominent way for increasing spectral efficiency in transmission systems. Coherent transceivers that support such higher order formats require heavy digital signal processing (DSP), which increases the power consumption of coherent pluggables, well above the intensity modulation and direct detection (IM/DD) counterparts. Self-coherent or phase retrieval methods have emerged as potential solutions, trying to combine the merits of coherent technology with the simplicity of direct detection. In this work, we experimentally demonstrate the reception of quadrature amplitude modulation (QAM) modulation formats based on direct detection aided by the recurrent optical spectrum slicing (ROSS) photonic accelerator, utilizing minimal DSP and low modulator driving voltages. We experimentally demonstrate 32 Gbaud QAM-4/16 for 25 km, 50 km and 75 km in the C-band aided by a linear digital equalization and the use of programmable photonics as recurrent optical spectrum slicers. We showcase successful detection with driving swings below Vπ/3 in contrast to the full swing required by conventional coherent transceivers. We further improve the system performance utilizing geometric constellation shaping. Finally, we explore the potential power consumption improvement for the next-generation 1.6T pluggables, showcasing over 40% reduction with respect to the most lightweight state of the art coherent solutions reported in literature
△ Less
Submitted 12 March, 2025;
originally announced March 2025.
-
Resonant EO combs: Beyond the standard phase noise model of frequency combs
Authors:
Holger R. Heebøll,
Pooja Sekhar,
Jasper Riebesehl,
Aleksandr Razumov,
Matt Heyrich,
Michael Galili,
Francesco Da Ros,
Scott Diddams,
Darko. Zibar
Abstract:
A resonant electro-optic (EO) frequency comb is generated through electro-optic modulation of laser light within an optical resonator. Compared to cavity-less EO combs generated in a single pass through a modulator, resonant EO combs can produce broader spectra with lower radio frequency (RF) power and offer a measure of noise filtering beyond the cavity's linewidth. Understanding, measuring, and…
▽ More
A resonant electro-optic (EO) frequency comb is generated through electro-optic modulation of laser light within an optical resonator. Compared to cavity-less EO combs generated in a single pass through a modulator, resonant EO combs can produce broader spectra with lower radio frequency (RF) power and offer a measure of noise filtering beyond the cavity's linewidth. Understanding, measuring, and suppressing the sources of phase noise in resonant EO combs is crucial for their applications in metrology, astrophotonics, optical clock generation, and fiber-optic communication. According to the standard phase noise model of frequency combs, only two variables - the common mode offset and repetition rate phase noise - are needed to fully describe the phase noise of comb lines. However, in this work we demonstrate analytically, numerically, and experimentally that this standard model breaks down for resonant EO combs at short timescales (high frequencies) and under certain comb parameters. Specifically, a third phase noise component emerges. Consequently, resonant EO combs feature qualitatively different phase noise from their cavity-less counterparts and may not exhibit the anticipated noise filtering. A more complete description of the deviations from the standard phase noise model is critical to accurately predict the performance of frequency combs. The description presented here paves the way for improved designs tailored to applications such as super-continuum generation and optical communication.
△ Less
Submitted 18 September, 2024; v1 submitted 10 September, 2024;
originally announced September 2024.
-
Phase Noise Characterization of Cr:ZnS Frequency Comb using Subspace Tracking
Authors:
Aleksandr Razumov,
Sergey Vasilyev,
Mike Mirov,
Jasper Riebesehl,
Holger R. Heebøll,
Francesco Da Ros,
Darko Zibar
Abstract:
We present a comprehensive phase noise characterization of a mid-IR Cr:ZnS frequency comb. Despite their emergence as a platform for high-resolution dual-comb spectroscopy, detailed investigations into the phase noise of Cr:ZnS combs have been lacking. To address this, we use a recently proposed phase noise measurement technique that employs multi-heterodyne detection and subspace tracking. This a…
▽ More
We present a comprehensive phase noise characterization of a mid-IR Cr:ZnS frequency comb. Despite their emergence as a platform for high-resolution dual-comb spectroscopy, detailed investigations into the phase noise of Cr:ZnS combs have been lacking. To address this, we use a recently proposed phase noise measurement technique that employs multi-heterodyne detection and subspace tracking. This allows for the measurement of the common mode, repetition-rate and high-order phase noise terms, and their corresponding scaling as a function of a comb-line number, using a single measurement set-up. We demonstrate that the comb under test is dominated by the common mode phase noise, while all the other phase noise terms are below the measurement noise floor (~ -120 dB rad^2/Hz), and are thereby not identifiable.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Multi-task Photonic Reservoir Computing: Wavelength Division Multiplexing for Parallel Computing with a Silicon Microring Resonator
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Nowadays, as the ever-increasing demand for more powerful computing resources continues, alternative advanced computing paradigms are under extensive investigation. Significant effort has been made to deviate from conventional Von Neumann architectures. In-memory computing has emerged in the field of electronics as a possible solution to the infamous bottleneck between memory and computing process…
▽ More
Nowadays, as the ever-increasing demand for more powerful computing resources continues, alternative advanced computing paradigms are under extensive investigation. Significant effort has been made to deviate from conventional Von Neumann architectures. In-memory computing has emerged in the field of electronics as a possible solution to the infamous bottleneck between memory and computing processors, which reduces the effective throughput of data. In photonics, novel schemes attempt to collocate the computing processor and memory in a single device. Photonics offers the flexibility of multiplexing streams of data not only spatially and in time, but also in frequency or, equivalently, in wavelength, which makes it highly suitable for parallel computing. Here, we numerically show the use of time and wavelength division multiplexing (WDM) to solve four independent tasks at the same time in a single photonic chip, serving as a proof of concept for our proposal. The system is a time-delay reservoir computing (TDRC) based on a microring resonator (MRR). The addressed tasks cover different applications: Time-series prediction, waveform signal classification, wireless channel equalization, and radar signal prediction. The system is also tested for simultaneous computing of up to 10 instances of the same task, exhibiting excellent performance. The footprint of the system is reduced by using time-division multiplexing of the nodes that act as the neurons of the studied neural network scheme. WDM is used for the parallelization of wavelength channels, each addressing a single task. By adjusting the input power and frequency of each optical channel, we can achieve levels of performance for each of the tasks that are comparable to those quoted in state-of-the-art reports focusing on single-task operation...
△ Less
Submitted 8 October, 2024; v1 submitted 30 July, 2024;
originally announced July 2024.
-
Experimental Investigation of a Recurrent Optical Spectrum Slicing Receiver for Intensity Modulation/Direct Detection systems using Programmable Photonics
Authors:
Kostas Sozos,
Francesco Da Ros,
Metodi P. Yankov,
George Sarantoglou,
Stavros Deligiannidis,
Charis Mesaritakis,
Adonis Bogris
Abstract:
In this paper, we experimentally validate our previous numerical works in recurrent optical spectrum slicing (ROSS) accelerators for dispersion compensation in high-speed IM/DD links. For this, we utilize recurrent filters implemented both through a waveshaper and by exploiting novel integrated programmable photonic platforms. Different recurrent configurations are tested. The ROSS accelerators ex…
▽ More
In this paper, we experimentally validate our previous numerical works in recurrent optical spectrum slicing (ROSS) accelerators for dispersion compensation in high-speed IM/DD links. For this, we utilize recurrent filters implemented both through a waveshaper and by exploiting novel integrated programmable photonic platforms. Different recurrent configurations are tested. The ROSS accelerators exploit frequency processing through recurrent optical filter nodes in order to mitigate the power fading effect, which hinders the transmission distance and baudrate scalability of IM/DD systems. By equalizing even 80 km of 64 Gb/s PAM-4 transmission in C-band, we prove that our system can offer an appealing solution in highly dispersive channels.
△ Less
Submitted 9 March, 2024;
originally announced June 2024.
-
Memory Capacity Analysis of Time-delay Reservoir Computing Based on Silicon Microring Resonator Nonlinearities
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Francesco Da Ros
Abstract:
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide…
▽ More
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide between the through and add ports of the MRR, it is possible to implement a time-delay RC (TDRC) with enhanced memory. The input from the through port is fed back into the add port of the ring with the delay applied by the external waveguide effectively adding memory. In a TDRC, the nodes are multiplexed in time, and their respective time evolutions are detected at the drop port. The performance of MRR-based TDRC is highly dependent on the amount of nonlinearity in the MRR. The nonlinear effects, in turn, are dependent on the physical properties of the MRR as they determine the lifetime of the effects. Another factor to take into account is the stability of the MRR response, as strong time-domain discontinuities at the drop port are known to emerge from FCD nonlinearities due to self-pulsing (high nonlinear behaviour). However, quantifying the right amount of nonlinearity that RC needs for a certain task in order to achieve optimum performance is challenging. Therefore, further analysis is required to fully understand the nonlinear dynamics of this TDRC setup. Here, we quantify the nonlinear and linear memory capacity of the previously described microring-based TDRC scheme, as a function of the time constants of the generated carriers and the thermal of the TO effects. We analyze the properties of the TDRC dynamics that generate the parameter space, in terms of input signal power and frequency detuning range, over which conventional RC tasks can be satisfactorily performed by the TDRC scheme.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Thermal Crosstalk Modelling and Compensation Methods for Programmable Photonic Integrated Circuits
Authors:
Isidora Teofilovic,
Ali Cem,
David Sanchez-Jacome,
Daniel Perez-Lopez,
Francesco Da Ros
Abstract:
Photonic integrated circuits play an important role in the field of optical computing, promising faster and more energy-efficient operations compared to their digital counterparts. This advantage stems from the inherent suitability of optical signals to carry out matrix multiplication. However, even deterministic phenomena such as thermal crosstalk make precise programming of photonic chips a chal…
▽ More
Photonic integrated circuits play an important role in the field of optical computing, promising faster and more energy-efficient operations compared to their digital counterparts. This advantage stems from the inherent suitability of optical signals to carry out matrix multiplication. However, even deterministic phenomena such as thermal crosstalk make precise programming of photonic chips a challenging task. Here, we train and experimentally evaluate three models incorporating varying degrees of physics intuition to predict the effect of thermal crosstalk in different locations of an integrated programmable photonic mesh. We quantify the effect of thermal crosstalk by the resonance wavelength shift in the power spectrum of a microring resonator implemented in the chip, achieving modelling errors <0.5 pm. We experimentally validate the models through compensation of the crosstalk-induced wavelength shift. Finally, we evaluate the generalization capabilities of one of the models by employing it to predict and compensate for the effect of thermal crosstalk for parts of the chip it was not trained on, revealing root-mean-square-errors of <2.0 pm.
△ Less
Submitted 19 March, 2024;
originally announced April 2024.
-
BICM-compatible Rate Adaptive Geometric Constellation Shaping Using Optimized Many-to-one Labeling
Authors:
Metodi Plamenov Yankov,
Smaranika Swain,
Ognjen Jovanovic,
Darko Zibar,
Francesco Da Ros
Abstract:
In this paper, a rate adaptive geometric constellation shaping (GCS) scheme which is fully backward-compatible with existing state of the art bit-interleaved coded modulation (BICM) systems is proposed and experimentally demonstrated. The system relies on optimization of the positions of the quadrature amplitude modulation (QAM) points on the I/Q plane for maximized achievable information rate, wh…
▽ More
In this paper, a rate adaptive geometric constellation shaping (GCS) scheme which is fully backward-compatible with existing state of the art bit-interleaved coded modulation (BICM) systems is proposed and experimentally demonstrated. The system relies on optimization of the positions of the quadrature amplitude modulation (QAM) points on the I/Q plane for maximized achievable information rate, while maintaining quantization and fiber nonlinear noise robustness. Furthermore, `dummy' bits are multiplexed with coded bits before mapping to symbols. Rate adaptivity is achieved by tuning the ratio of coded and `dummy' bits, while maintaining a fixed forward error-correction block and a fixed modulation format size. The points' positions and their labeling are optimized using automatic differentiation. The proposed GCS scheme is compared to a time-sharing hybrid (TH) QAM modulation and the now mainstream probabilistic amplitude shaping (PAS) scheme. The TH without shaping is outperformed for all studied data rates in a simulated linear channel by up to 0.7 dB. In a linear channel, PAS is shown to outperform the proposed GCS scheme, while similar performances are reported for PAS and the proposed GCS in a simulated nonlinear fiber channel. The GCS scheme is experimentally demonstrated in a multi-span recirculating loop coherent optical fiber transmission system with a total distance of up to 3000 km. Near-continuous zero-error flexible throughput is reported as a function of the transmission distance. Up to 1-2 spans of increased reach gains are achieved at the same net data rate w.r.t. conventional QAM. At a given distance, up to 0.79 bits/2D symbol of gain w.r.t. conventional QAM is achieved. In the experiment, similar performance to PAS is demonstrated.
△ Less
Submitted 13 March, 2024; v1 submitted 10 November, 2023;
originally announced December 2023.
-
Generation of electro-optic frequency combs with optimized flatness in a silicon ring resonator modulator
Authors:
Erwan Weckenmann,
Thyago Monteiro,
Uiara Celine de Moura,
Francesco Da Ros,
Laurent Bramerie,
Mathilde Gay,
Diego Pérez-Galacho,
Lucas Deniel,
Frédéric Boeuf,
Delphine Marris-Morini,
Darko Zibar,
Christophe Peucheret
Abstract:
The flatness of electro-optic frequency combs (EOFCs) generated in a single silicon ring resonator modulator (RRM) is optimized by employing harmonic superposition of the radio-frequency driving signal. A differential evolution algorithm is employed in conjunction with a simplified model of the RRM for offline optimization of the amplitudes and phases of harmonic driving signals and the operating…
▽ More
The flatness of electro-optic frequency combs (EOFCs) generated in a single silicon ring resonator modulator (RRM) is optimized by employing harmonic superposition of the radio-frequency driving signal. A differential evolution algorithm is employed in conjunction with a simplified model of the RRM for offline optimization of the amplitudes and phases of harmonic driving signals and the operating point of the RRM. The optimized driving signals are then applied to a silicon RRM. EOFCs containing 7 and 9 lines are synthesized with a power imbalance between the lines of 2.9 dB and 5.4 dB, respectively, compared to 9.4 dB for an optimized 5-line comb generated from a single sinusoidal driving signal.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Multi-Task Wavelength-Multiplexed Reservoir Computing Using a Silicon Microring Resonator
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on…
▽ More
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on the same photonic circuit. In particular, we consider a microring-based time-delay reservoir computing (TDRC) scheme that simultaneously solves three tasks: Time-series prediction, classification, and wireless channel equalization. The scheme relies on time-division multiplexing to avoid the necessity of multiple physical nonlinear nodes, while the tasks are parallelized using wavelength division multiplexing (WDM). The input data modulated on each optical channel is mapped to a higher dimensional space by the nonlinear dynamics of the silicon microring cavity. The carrier wavelength and input power assigned to each optical channel have a high influence on the performance of its respective task. When all tasks operate under the same wavelength/power conditions, our results show that the computing nature of each task is the deciding factor of the level of performance achievable. However, it is possible to achieve good performance for all tasks simultaneously by optimizing the parameters of each optical channel. The variety of applications covered by the tasks shows the versatility of the proposed photonic TDRC scheme. Overall, this work provides insight into the potential of WDM-based schemes for improving the computing capabilities of reservoir computing schemes.
△ Less
Submitted 27 April, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Effects of cavity nonlinearities and linear losses on silicon microring-based reservoir computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series t…
▽ More
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series task NARMA-10. We demonstrate the existence of three regions, defined by the input power and the frequency detuning between the optical source and the microring resonance, that reveal the cavity transition from linear to nonlinear regimes. One of these regions offers very low error in time-series prediction under relatively low input power and number of nodes while the other regions either lack nonlinearity or become unstable. This study provides insight into the design of the MRR and the optimization of its physical properties for improving the prediction performance of time-delay reservoir computing.
△ Less
Submitted 22 December, 2023; v1 submitted 13 October, 2023;
originally announced October 2023.
-
A comparison between black-, grey- and white-box modeling for the bidirectional Raman amplifier optimization
Authors:
Metodi P. Yankov,
Mehran Soltani,
Andrea Carena,
Darko Zibar,
Francesco Da Ros
Abstract:
Designing and optimizing optical amplifiers to maximize system performance is becoming increasingly important as optical communication systems strive to increase throughput. Offline optimization of optical amplifiers relies on models ranging from white-box models deeply rooted in physics to black-box data-driven and physics-agnostic models. Here, we compare the capabilities of white-, grey- and bl…
▽ More
Designing and optimizing optical amplifiers to maximize system performance is becoming increasingly important as optical communication systems strive to increase throughput. Offline optimization of optical amplifiers relies on models ranging from white-box models deeply rooted in physics to black-box data-driven and physics-agnostic models. Here, we compare the capabilities of white-, grey- and black-box models on the challenging test case of optimizing a bidirectional distributed Raman amplifier to achieve a target frequency-distance signal power profile. We show that any of the studied methods can achieve similar frequency and distance flatness of between 1 and 3.6 dB (depending on the definition of flatness) over the C-band in an 80-km span. Then, we discuss the models' applicability, advantages, and drawbacks based on the target application scenario, in particular in terms of flexibility, optimization speed, and access to training data.
△ Less
Submitted 31 July, 2024; v1 submitted 11 September, 2023;
originally announced October 2023.
-
Addressing Data Scarcity in Optical Matrix Multiplier Modeling Using Transfer Learning
Authors:
Ali Cem,
Ognjen Jovanovic,
Siqi Yan,
Yunhong Ding,
Darko Zibar,
Francesco Da Ros
Abstract:
We present and experimentally evaluate using transfer learning to address experimental data scarcity when training neural network (NN) models for Mach-Zehnder interferometer mesh-based optical matrix multipliers. Our approach involves pre-training the model using synthetic data generated from a less accurate analytical model and fine-tuning with experimental data. Our investigation demonstrates th…
▽ More
We present and experimentally evaluate using transfer learning to address experimental data scarcity when training neural network (NN) models for Mach-Zehnder interferometer mesh-based optical matrix multipliers. Our approach involves pre-training the model using synthetic data generated from a less accurate analytical model and fine-tuning with experimental data. Our investigation demonstrates that this method yields significant reductions in modeling errors compared to using an analytical model, or a standalone NN model when training data is limited. Utilizing regularization techniques and ensemble averaging, we achieve < 1 dB root-mean-square error on the matrix weights implemented by a 3x3 photonic chip while using only 25% of the available data.
△ Less
Submitted 13 November, 2023; v1 submitted 10 August, 2023;
originally announced August 2023.
-
Data-Driven Modeling of Directly-Modulated Lasers
Authors:
Sergio Hernandez Fernandez,
Christophe Peucheret,
Ognjen Jovanovic,
Francesco Da Ros,
Darko Zibar
Abstract:
The end-to-end optimization of links based on directly-modulated lasers may require an analytically differentiable channel. We overcome this problem by developing and comparing differentiable laser models based on machine learning techniques.
The end-to-end optimization of links based on directly-modulated lasers may require an analytically differentiable channel. We overcome this problem by developing and comparing differentiable laser models based on machine learning techniques.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Subspace tracking for independent phase noise source separation in frequency combs
Authors:
Aleksandr Razumov,
Holger R. Heebøll,
Mario Dummont,
Osama Terra,
Bozhang Dong,
Jasper Riebesehl,
Poul Varming,
Jens E. Pedersen,
Francesco Da Ros,
John E. Bowers,
Darko Zibar
Abstract:
Advanced digital signal processing techniques in combination with ultra-wideband balanced coherent detection have enabled a new generation of ultra-high speed fiber-optic communication systems, by moving most of the processing functionalities into digital domain. In this paper, we demonstrate how digital signal processing techniques, in combination with ultra-wideband balanced coherent detection c…
▽ More
Advanced digital signal processing techniques in combination with ultra-wideband balanced coherent detection have enabled a new generation of ultra-high speed fiber-optic communication systems, by moving most of the processing functionalities into digital domain. In this paper, we demonstrate how digital signal processing techniques, in combination with ultra-wideband balanced coherent detection can enable optical frequency comb noise characterization techniques with novel functionalities. We propose a measurement method based on subspace tracking, in combination with multi-heterodyne coherent detection, for independent phase noise sources identification, separation and measurement. Our proposed measurement technique offers several benefits. First, it enables the separation of the total phase noise associated with a particular comb-line or -lines into multiple independent phase noise terms associated with different noise sources. Second, it facilitates the determination of the scaling of each independent phase noise term with comb-line number. Our measurement technique can be used to: identify the most dominant source of phase noise; gain a better understanding of the physics behind the phase noise accumulation process; and confirm, already existing, and enable better phase noise models. In general, our measurement technique provides new insights into noise behavior of optical frequency combs.
△ Less
Submitted 18 September, 2023; v1 submitted 15 May, 2023;
originally announced May 2023.
-
Data-driven Modeling of Mach-Zehnder Interferometer-based Optical Matrix Multipliers
Authors:
Ali Cem,
Siqi Yan,
Yunhong Ding,
Darko Zibar,
Francesco Da Ros
Abstract:
Photonic integrated circuits are facilitating the development of optical neural networks, which have the potential to be both faster and more energy efficient than their electronic counterparts since optical signals are especially well-suited for implementing matrix multiplications. However, accurate programming of photonic chips for optical matrix multiplication remains a difficult challenge. Her…
▽ More
Photonic integrated circuits are facilitating the development of optical neural networks, which have the potential to be both faster and more energy efficient than their electronic counterparts since optical signals are especially well-suited for implementing matrix multiplications. However, accurate programming of photonic chips for optical matrix multiplication remains a difficult challenge. Here, we describe both simple analytical models and data-driven models for offline training of optical matrix multipliers. We train and evaluate the models using experimental data obtained from a fabricated chip featuring a Mach-Zehnder interferometer mesh implementing 3-by-3 matrix multiplication. The neural network-based models outperform the simple physics-based models in terms of prediction error. Furthermore, the neural network models are also able to predict the spectral variations in the matrix weights for up to 100 frequency channels covering the C-band. The use of neural network models for programming the chip for optical matrix multiplication yields increased performance on multiple machine learning tasks.
△ Less
Submitted 6 March, 2023; v1 submitted 17 October, 2022;
originally announced October 2022.
-
Experimental validation of machine-learning based spectral-spatial power evolution shaping using Raman amplifiers
Authors:
Mehran Soltani,
Francesco Da Ros,
Andrea Carena,
Darko Zibar
Abstract:
We experimentally validate a real-time machine learning framework, capable of controlling the pump power values of Raman amplifiers to shape the signal power evolution in two-dimensions (2D): frequency and fiber distance. In our setup, power values of four first-order counter-propagating pumps are optimized to achieve the desired 2D power profile. The pump power optimization framework includes a c…
▽ More
We experimentally validate a real-time machine learning framework, capable of controlling the pump power values of Raman amplifiers to shape the signal power evolution in two-dimensions (2D): frequency and fiber distance. In our setup, power values of four first-order counter-propagating pumps are optimized to achieve the desired 2D power profile. The pump power optimization framework includes a convolutional neural network (CNN) followed by differential evolution (DE) technique, applied online to the amplifier setup to automatically achieve the target 2D power profiles. The results on achievable 2D profiles show that the framework is able to guarantee very low maximum absolute error (MAE) (<0.5 dB) between the obtained and the target 2D profiles. Moreover, the framework is tested in a multi-objective design scenario where the goal is to achieve the 2D profiles with flat gain levels at the end of the span, jointly with minimum spectral excursion over the entire fiber length. In this case, the experimental results assert that for 2D profiles with the target flat gain levels, the DE obtains less than 1 dB maximum gain deviation, when the setup is not physically limited in the pump power values. The simulation results also prove that with enough pump power available, better gain deviation (less than 0.6 dB) for higher target gain levels is achievable.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Experimental Validation of Spectral-Spatial Power Evolution Design Using Raman Amplifiers
Authors:
Mehran Soltani,
Francesco Da Ros,
Andrea Carena,
Darko Zibar
Abstract:
We experimentally validate a machine learning-enabled Raman amplification framework, capable of jointly shaping the signal power evolution in two domains: frequency and fiber distance. The proposed experiment addresses the amplification in the whole C-band, by optimizing four first-order counter-propagating Raman pumps.
We experimentally validate a machine learning-enabled Raman amplification framework, capable of jointly shaping the signal power evolution in two domains: frequency and fiber distance. The proposed experiment addresses the amplification in the whole C-band, by optimizing four first-order counter-propagating Raman pumps.
△ Less
Submitted 16 May, 2022;
originally announced June 2022.
-
Approaching the optimum phase measurement in the presence of amplifier noise
Authors:
Darko Zibar,
Jens E. Pedersen,
Poul Varming,
Giovanni Brajato,
Francesco Da Ros
Abstract:
In fundamental papers from 1962 [1, 2], Heffener and Haus showed that it is not possible to construct a linear noiseless amplifier. The implies that the amplifier intrinsic noise sources induce random perturbations on the phase of the incoming optical signal which translates into spectral broadening. To achieve the minimum (quantum noise limited) induced phase fluctuation, and the corresponding mi…
▽ More
In fundamental papers from 1962 [1, 2], Heffener and Haus showed that it is not possible to construct a linear noiseless amplifier. The implies that the amplifier intrinsic noise sources induce random perturbations on the phase of the incoming optical signal which translates into spectral broadening. To achieve the minimum (quantum noise limited) induced phase fluctuation, and the corresponding minimum spectral broadening, an optimum phase measurement method is needed. We demonstrate that a measurement method based on the heterodyne detection and the extended Kalman filtering approaches an optimum phase measurement in the presence of amplifier noise. A penalty of 5 dB (numerical) and 15 dB (experimental) compared to the quantum limited spectral broadening is achieved. For comparison, the conventional phase measurement method's penalty exceeds 30 dB for the measurements. Our results reveal new scientific insights by demonstrating that the impact of amplifier noise can be significantly reduced by using the proposed phase measurement method. An impact is envisioned for the phase-based optical sensing system, as optical amplification could increase sensing distance with the minimum impact on the phase.
△ Less
Submitted 3 September, 2021; v1 submitted 7 June, 2021;
originally announced June 2021.
-
Inverse design of Raman amplifier in frequency and distance domain using Convolutional Neural Networks
Authors:
Mehran Soltani,
Francesco Da Ros,
Andrea Carena,
Darko Zibar
Abstract:
We present a Convolutional Neural Network (CNN) architecture for inverse Raman amplifier design. This model aims at finding the pump powers and wavelengths required for a target signal power evolution, both in distance along the fiber and in frequency. Using the proposed framework, the prediction of the pump configuration required to achieve a target power profile is demonstrated numerically with…
▽ More
We present a Convolutional Neural Network (CNN) architecture for inverse Raman amplifier design. This model aims at finding the pump powers and wavelengths required for a target signal power evolution, both in distance along the fiber and in frequency. Using the proposed framework, the prediction of the pump configuration required to achieve a target power profile is demonstrated numerically with high accuracy in C-band considering both counter-propagating and bidirectional pumping schemes. For a distributed Raman amplifier based on a 100 km single-mode fiber, a low mean set (0.51, 0.54 and 0.64 dB) and standard deviation set (0.62, 0.43 and 0.38 dB) of the maximum test error are obtained numerically employing 2 and 3 counter, and 4 bidirectional propagating pumps, respectively.
△ Less
Submitted 21 February, 2021;
originally announced March 2021.
-
All-Optical Nonlinear Pre-Compensation of Long-Reach Unrepeatered Systems
Authors:
Pawel M. Kaminski,
Tiago Sutili,
José Hélio da Cruz Júnior,
Glauco C. C. P. Simões,
Francesco Da Ros,
Metodi P. Yankov,
Henrik E. Hansen,
Anders T. Clausen,
Søren Forchhammer,
Leif K. Oxenløwe,
Rafael C. Figueiredo,
Michael Galili
Abstract:
We numerically demonstrate an all-optical nonlinearity pre-compensation module for state-of-the-art long-reach Raman-amplified unrepeatered links. The compensator design is optimized in terms of propagation symmetry to maximize the performance gains under WDM transmission, achieving 4.0dB and 2.6dB of SNR improvement for 250-km and 350-km links.
We numerically demonstrate an all-optical nonlinearity pre-compensation module for state-of-the-art long-reach Raman-amplified unrepeatered links. The compensator design is optimized in terms of propagation symmetry to maximize the performance gains under WDM transmission, achieving 4.0dB and 2.6dB of SNR improvement for 250-km and 350-km links.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
Simultaneous gain profile design and noise figure prediction for Raman amplifiers using machine learning
Authors:
Uiara Celine de Moura,
Ann Margareth Rosa Brusin,
Andrea Carena,
Darko Zibar,
Francesco Da Ros
Abstract:
A machine learning framework predicting pump powers and noise figure profile for a target distributed Raman amplifier gain profile is experimentally demonstrated. We employ a single-layer neural network to learn the mapping from the gain profiles to the pump powers and noise figures. The obtained results show highly-accurate gain profile designs and noise figure predictions, with a maximum error o…
▽ More
A machine learning framework predicting pump powers and noise figure profile for a target distributed Raman amplifier gain profile is experimentally demonstrated. We employ a single-layer neural network to learn the mapping from the gain profiles to the pump powers and noise figures. The obtained results show highly-accurate gain profile designs and noise figure predictions, with a maximum error on average of ~0.3dB. This framework provides the comprehensive characterization of the Raman amplifier and thus is a valuable tool for predicting the performance of the next-generation optical communication systems, expected to employ Raman amplification.
△ Less
Submitted 4 March, 2021; v1 submitted 9 December, 2020;
originally announced December 2020.
-
Experimental characterization of Raman amplifier optimization through inverse system design
Authors:
Uiara Celine de Moura,
Francesco Da Ros,
Ann Margareth Rosa Brusin,
Andrea Carena,
Darko Zibar
Abstract:
Optical communication systems are always evolving to support the need for ever-increasing transmission rates. This demand is supported by the growth in complexity of communication systems which are moving towards ultra-wideband transmission and space-division multiplexing. Both directions will challenge the design, modeling, and optimization of devices, subsystems, and full systems. Amplification…
▽ More
Optical communication systems are always evolving to support the need for ever-increasing transmission rates. This demand is supported by the growth in complexity of communication systems which are moving towards ultra-wideband transmission and space-division multiplexing. Both directions will challenge the design, modeling, and optimization of devices, subsystems, and full systems. Amplification is a key functionality to support this growth and in this context, we recently demonstrated a versatile machine learning framework for designing and modeling Raman amplifiers with arbitrary gains. In this paper, we perform a thorough experimental characterization of such machine learning framework. The applicability of the proposed approach, as well as its ability to accurately provide flat and tilted gain-profiles, are tested on several practical fiber types, showing errors below 0.5~dB. Moreover, as channel power optimization is heavily employed to further enhance the transmission rate, the tolerance of the framework to variations in the input signal spectral profile is investigated. Results show that the inverse design can provide highly accurate gain-profile adjustments for different input signal power profiles even not considering this information during the training phase.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Machine learning-based EDFA Gain Model Generalizable to Multiple Physical Devices
Authors:
Francesco Da Ros,
Uiara Celine de Moura,
Metodi P. Yankov
Abstract:
We report a neural-network based erbium-doped fiber amplifier (EDFA) gain model built from experimental measurements. The model shows low gain-prediction error for both the same device used for training (MSE $\leq$ 0.04 dB$^2$) and different physical units of the same make (generalization MSE $\leq$ 0.06 dB$^2$).
We report a neural-network based erbium-doped fiber amplifier (EDFA) gain model built from experimental measurements. The model shows low gain-prediction error for both the same device used for training (MSE $\leq$ 0.04 dB$^2$) and different physical units of the same make (generalization MSE $\leq$ 0.06 dB$^2$).
△ Less
Submitted 11 September, 2020;
originally announced September 2020.
-
Multi-band programmable gain Raman amplifier
Authors:
Uiara Celine de Moura,
Md Asif Iqbal,
Morteza Kamalian,
Lukasz Krzczanowicz,
Francesco Da Ros,
Ann Margareth Rosa Brusin,
Andrea Carena,
Wladek Forysiak,
Sergei Turitsyn,
Darko Zibar
Abstract:
Optical communication systems, operating in C-band, are reaching their theoretically achievable capacity limits. An attractive and economically viable solution to satisfy the future data rate demands is to employ the transmission across the full low-loss spectrum encompassing O, E, S, C and L band of the single mode fibers (SMF). Utilizing all five bands offers a bandwidth of up to $\sim$53.5THz (…
▽ More
Optical communication systems, operating in C-band, are reaching their theoretically achievable capacity limits. An attractive and economically viable solution to satisfy the future data rate demands is to employ the transmission across the full low-loss spectrum encompassing O, E, S, C and L band of the single mode fibers (SMF). Utilizing all five bands offers a bandwidth of up to $\sim$53.5THz (365nm) with loss below 0.4dB/km. A key component in realizing multi-band optical communication systems is the optical amplifier. Apart from having an ultra-wide gain profile, the ability of providing arbitrary gain profiles, in a controlled way, will become an essential feature. The latter will allow for signal power spectrum shaping which has a broad range of applications such as the maximization of the achievable information rate X distance product, the elimination of static and lossy gain flattening filters (GFF) enabling a power efficient system design, and the gain equalization of optical frequency combs. In this paper, we experimentally demonstrate a multi-band (S+C+L) programmable gain optical amplifier using only Raman effects and machine learning. The amplifier achieves >1000 programmable gain profiles within the range from 3.5 to 30 dB, in an ultra-fast way and a very low maximum error of 1.6e-2 dB/THz over an ultra-wide bandwidth of 17.6-THz (140.7-nm).
△ Less
Submitted 23 October, 2020; v1 submitted 22 June, 2020;
originally announced June 2020.
-
Experimental demonstration of arbitrary Raman gain-profile designs using machine learning
Authors:
Uiara C. de Moura,
Francesco Da Ros,
A. Margareth Rosa Brusin,
Andrea Carena,
Darko Zibar
Abstract:
A machine learning framework for Raman amplifier design is experimentally tested. Performance in terms of maximum error over the gain profile is investigated for various fiber types and lengths, demonstrating highly-accurate designs.
A machine learning framework for Raman amplifier design is experimentally tested. Performance in terms of maximum error over the gain profile is investigated for various fiber types and lengths, demonstrating highly-accurate designs.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Dual-polarization NFDM transmission with continuous and discrete spectral modulation
Authors:
F. Da Ros,
S. Civelli,
S. Gaiarin,
E. P. da Silva,
N. De Renzis,
M. Secondini,
D. Zibar
Abstract:
Nonlinear distortion experienced by signals during their propagation through optical fibers strongly limits the throughput of optical communication systems. Recently, a strong research focus has been dedicated to nonlinearity mitigation and compensation techniques. At the same time, a more disruptive approach, the nonlinear Fourier transform (NFT), aims at designing signaling schemes more suited t…
▽ More
Nonlinear distortion experienced by signals during their propagation through optical fibers strongly limits the throughput of optical communication systems. Recently, a strong research focus has been dedicated to nonlinearity mitigation and compensation techniques. At the same time, a more disruptive approach, the nonlinear Fourier transform (NFT), aims at designing signaling schemes more suited to the nonlinear fiber channel. In a short period, impressive results have been reported by modulating either the continuous spectrum or the discrete spectrum. Additionally, very recent works further introduced the opportunity to modulate both spectra for single polarization transmission. Here, we extend the joint modulation scheme to dual-polarization transmission by introducing the framework to construct a dual-polarization optical signal with the desired continuous and discrete spectra. After a brief analysis of the numerical algorithms used to implement the proposed scheme, the first experimental demonstration of dual-polarization joint nonlinear frequency division multiplexing (NFDM) modulation is reported for up to 3200 km of low-loss transmission fiber. The proposed dual-polarization joint modulation schemes enables to exploit all the degrees of freedom for modulation (both polarizations and both spectra) provided by a single-mode fiber (SMF).
△ Less
Submitted 26 February, 2019;
originally announced March 2019.
-
Optical wavelength conversion of high bandwidth phase-encoded signals in a high FOM 50cm CMOS compatible waveguide
Authors:
Francesco Da Ros,
Edson Porto da Silva,
Darko Zibar,
Sai T. Chu,
Brent E. Little,
Roberto Morandotti,
Michael Galili,
David J. Moss,
Leif K. Oxenløwe
Abstract:
We demonstrate wavelength conversion of QAM signals including 32GBd QPSK and 10GBd 16QAM in a 50cm long high index doped glass spiral waveguide. The quality of the generated idlers over a 10nm bandwidth is sufficient to achieve a BER performance below the HD FEC threshold (less than 3.8 x 10-3), with an OSNR penalty of less than 0.3 dB compared to the original signal. Our results confirm that this…
▽ More
We demonstrate wavelength conversion of QAM signals including 32GBd QPSK and 10GBd 16QAM in a 50cm long high index doped glass spiral waveguide. The quality of the generated idlers over a 10nm bandwidth is sufficient to achieve a BER performance below the HD FEC threshold (less than 3.8 x 10-3), with an OSNR penalty of less than 0.3 dB compared to the original signal. Our results confirm that this is a promising platform for nonlinear optical signal processing, a result of both very low linear propagation loss (less than 0.07 dB/cm) and the large material bandgap that ensures negligible nonlinear loss at telecom wavelengths.
△ Less
Submitted 7 August, 2018;
originally announced August 2018.
-
Constellation Shaping for WDM systems using 256QAM/1024QAM with Probabilistic Optimization
Authors:
Metodi P. Yankov,
Francesco Da Ros,
Edson P. da Silva,
Søren Forchhammer,
Knud J. Larsen,
Leif K. Oxenløwe,
Michael Galili,
Darko Zibar
Abstract:
In this paper, probabilistic shaping is numerically and experimentally investigated for increasing the transmission reach of wavelength division multiplexed (WDM) optical communication system employing quadrature amplitude modulation (QAM). An optimized probability mass function (PMF) of the QAM symbols is first found from a modified Blahut-Arimoto algorithm for the optical channel. A turbo coded…
▽ More
In this paper, probabilistic shaping is numerically and experimentally investigated for increasing the transmission reach of wavelength division multiplexed (WDM) optical communication system employing quadrature amplitude modulation (QAM). An optimized probability mass function (PMF) of the QAM symbols is first found from a modified Blahut-Arimoto algorithm for the optical channel. A turbo coded bit interleaved coded modulation system is then applied, which relies on many-to-one labeling to achieve the desired PMF, thereby achieving shaping gain. Pilot symbols at rate at most 2% are used for synchronization and equalization, making it possible to receive input constellations as large as 1024QAM. The system is evaluated experimentally on a 10 GBaud, 5 channels WDM setup. The maximum system reach is increased w.r.t. standard 1024QAM by 20% at input data rate of 4.65 bits/symbol and up to 75% at 5.46 bits/symbol. It is shown that rate adaptation does not require changing of the modulation format. The performance of the proposed 1024QAM shaped system is validated on all 5 channels of the WDM signal for selected distances and rates. Finally, it was shown via EXIT charts and BER analysis that iterative demapping, while generally beneficial to the system, is not a requirement for achieving the shaping gain.
△ Less
Submitted 11 September, 2016; v1 submitted 23 March, 2016;
originally announced March 2016.
