-
Slip flows of a Bingham fluid in curved channels
Authors:
S. J. Cox,
S. M. Taghavi
Abstract:
Motivated by the treatment of varicose veins with aqueous foams, we determine the velocity profiles and yield surface positions for pressure-driven flows of a Bingham fluid in curved channels, incorporating Navier wall slip to capture the slip behavior of aqueous foams. Assuming a constant pressure gradient -- consistent with syringe-driven injection in sclerotherapy -- we reproduce a closed-form…
▽ More
Motivated by the treatment of varicose veins with aqueous foams, we determine the velocity profiles and yield surface positions for pressure-driven flows of a Bingham fluid in curved channels, incorporating Navier wall slip to capture the slip behavior of aqueous foams. Assuming a constant pressure gradient -- consistent with syringe-driven injection in sclerotherapy -- we reproduce a closed-form analytic solution for the flow in a straight channel, and extend this to a uniformly curved channel consisting of a section of an annulus. We find that increasing the slip length in the curved channel moves the unyielded fluid, or plug, towards the inside of the channel and slightly decreases the plug width. Channels with a change in curvature are tackled numerically, with a procedure that is validated against the analytic results. We solve for the flow of a Bingham fluid in the transition region between a straight and a uniformly curved channel and in a non-uniform sinusoidal channel where the wall curvature changes continuously. We find that there is greater yielding of the fluid in curved channels, caused by an increase in the shear stresses. As the slip length increases, there is a reduction in the area of unyielded fluid in regions of high wall curvature. In the context of varicose vein sclerotherapy, our results suggest that slip has both positive and negative consequences: it reduces the possibility of static regions of foam developing in areas of high curvature in the vein, but also reduces the plug width in general, reducing the efficacy with which the foam displaces blood from the vein.
△ Less
Submitted 18 June, 2025;
originally announced June 2025.
-
Inline calibration of spatial light modulators in nonlinear microscopy
Authors:
Daniël W. S. Cox,
Harish Sasikumar,
Ivo M. Vellekoop
Abstract:
We present a method for calibrating the response of a phase-only spatial light modulator in nonlinear microscopy. Our method uses the microscope image itself as calibration measurement and requires no additional hardware components. Our method is adapted to the nonlinear signals encountered in multi-photon excitation fluorescence microscopes, and works well even under low light conditions and with…
▽ More
We present a method for calibrating the response of a phase-only spatial light modulator in nonlinear microscopy. Our method uses the microscope image itself as calibration measurement and requires no additional hardware components. Our method is adapted to the nonlinear signals encountered in multi-photon excitation fluorescence microscopes, and works well even under low light conditions and with strong photobleaching.
△ Less
Submitted 28 May, 2025;
originally announced May 2025.
-
Nanoconfined superionic water is a molecular superionic
Authors:
Samuel W. Coles,
Amir Hajibabaei,
Venkat Kapil,
Xavier R. Advincula,
Christoph Schran,
Stephen J. Cox,
Angelos Michaelides
Abstract:
Superionic ice, where water molecules dissociate into a lattice of oxygen ions and a rapidly diffusing 'gas' of protons, represents an exotic state of matter with broad implications for planetary interiors and energy applications. Recently, a nanoconfined superionic state of water has been predicted which, in sharp contrast to bulk ice, is comprised of intact water molecules. Here, we apply machin…
▽ More
Superionic ice, where water molecules dissociate into a lattice of oxygen ions and a rapidly diffusing 'gas' of protons, represents an exotic state of matter with broad implications for planetary interiors and energy applications. Recently, a nanoconfined superionic state of water has been predicted which, in sharp contrast to bulk ice, is comprised of intact water molecules. Here, we apply machine learning and electronic structure simulations to establish how nanoconfined water can be both molecular and superionic. We also explore what insights this material offers for superionic materials and behavior more generally. Similar to bulk ice and other superionic materials, nanoconfined water conducts via concerted chain-like proton migrations which cause the rapid propagation of defects. However, unlike other molecular phases of water, its exceptional conductivity arises from the activation of the Grotthuss mechanism by (i) low barriers to proton transfer and (ii) a flexible hydrogen-bonded network. We propose that these are two key characteristics of fast ionic conduction in molecular superionics. The insights obtained here establish design principles for the discovery of other molecular superionic materials, with potential applications in energy storage and beyond.
△ Less
Submitted 20 May, 2025;
originally announced May 2025.
-
Dielectrocapillarity for exquisite control of fluids
Authors:
Anna T. Bui,
Stephen J. Cox
Abstract:
Spatially varying electric fields are prevalent throughout nature and technology, arising from heterogeneity inherent to all physical systems. Inhomogeneous electric fields can originate naturally, such as in nanoporous materials and biological membranes, or be engineered, e.g., with patterned electrodes or layered van der Waals heterostructures. While uniform fields cause free ions to migrate, fo…
▽ More
Spatially varying electric fields are prevalent throughout nature and technology, arising from heterogeneity inherent to all physical systems. Inhomogeneous electric fields can originate naturally, such as in nanoporous materials and biological membranes, or be engineered, e.g., with patterned electrodes or layered van der Waals heterostructures. While uniform fields cause free ions to migrate, for polar fluids they simply act to reorient the constituent molecules. In contrast, electric field gradients (EFGs) induce a dielectrophoretic force, offering exquisite electrokinetic control of a fluid, even in the absence of free charge carriers. EFGs, therefore, offer vast potential for optimizing fluid behavior under confinement, such as in nanoporous electrodes, nanofluidic devices, and chemical separation materials. Yet, EFGs remain largely unexplored at the microscopic level owing to the absence of a rigorous, first principles theoretical treatment of electrostrictive effects. By integrating state-of-the-art advances in liquid state theory and deep learning, we reveal how EFGs modulate fluid structure and capillary phenomena. We demonstrate, from first principles, that dielectrophoretic coupling enables tunable control over the liquid-gas phase transition, capillary condensation, and fluid uptake into porous media. Our findings establish "dielectrocapillarity'' -- the use of EFGs to control confined fluids -- as a powerful tool for controlling volumetric capacity in nanopores, which holds immense potential for optimizing energy storage in supercapacitors, selective gas separation, and tunable hysteresis in neuromorphic nanofluidic devices.
△ Less
Submitted 12 March, 2025;
originally announced March 2025.
-
A first principles approach to electromechanics in liquids
Authors:
Anna T. Bui,
Stephen J. Cox
Abstract:
Electromechanics in fluids describes the response of the number density to electric fields, and thus provides a powerful means by which to control the behavior of liquids. While continuum approaches have proven successful in describing electromechanical phenomena in macroscopic bodies, their use is questionable when relevant length scales become comparable to a system's natural correlation lengths…
▽ More
Electromechanics in fluids describes the response of the number density to electric fields, and thus provides a powerful means by which to control the behavior of liquids. While continuum approaches have proven successful in describing electromechanical phenomena in macroscopic bodies, their use is questionable when relevant length scales become comparable to a system's natural correlation lengths, as commonly occurs in, e.g., biological systems, nanopores, and microfluidics. Here, we present a first principles theory for electromechanical phenomena in fluids. Our approach is based on the recently proposed hyperdensity functional theory [Sammüller et al, Phys. Rev. Lett. 133, 098201 (2024)] in which we treat the charge density as an observable of the system, with the intrinsic Helmholtz free energy functional dependent upon both density and electrostatic potential. Expressions for the coupling between number and charge densities emerge naturally in this formalism, avoiding the need to construct density-dependent and spatially-varying material parameters such as the dielectric constant. Furthermore, we make our theory practical by deriving a connection between hyperdensity functional theory and local molecular field theory, which facilitates machine learning explicit representations for the free energy functionals of systems with short-ranged electrostatic interactions, with long-ranged effects accounted for in a well-controlled mean field fashion.
△ Less
Submitted 10 April, 2025; v1 submitted 12 March, 2025;
originally announced March 2025.
-
MDCrow: Automating Molecular Dynamics Workflows with Large Language Models
Authors:
Quintina Campbell,
Sam Cox,
Jorge Medina,
Brittany Watterson,
Andrew D. White
Abstract:
Molecular dynamics (MD) simulations are essential for understanding biomolecular systems but remain challenging to automate. Recent advances in large language models (LLM) have demonstrated success in automating complex scientific tasks using LLM-based agents. In this paper, we introduce MDCrow, an agentic LLM assistant capable of automating MD workflows. MDCrow uses chain-of-thought over 40 exper…
▽ More
Molecular dynamics (MD) simulations are essential for understanding biomolecular systems but remain challenging to automate. Recent advances in large language models (LLM) have demonstrated success in automating complex scientific tasks using LLM-based agents. In this paper, we introduce MDCrow, an agentic LLM assistant capable of automating MD workflows. MDCrow uses chain-of-thought over 40 expert-designed tools for handling and processing files, setting up simulations, analyzing the simulation outputs, and retrieving relevant information from literature and databases. We assess MDCrow's performance across 25 tasks of varying required subtasks and difficulty, and we evaluate the agent's robustness to both difficulty and prompt style. \texttt{gpt-4o} is able to complete complex tasks with low variance, followed closely by \texttt{llama3-405b}, a compelling open-source model. While prompt style does not influence the best models' performance, it has significant effects on smaller models.
△ Less
Submitted 13 February, 2025;
originally announced February 2025.
-
Learning classical density functionals for ionic fluids
Authors:
Anna T. Bui,
Stephen J. Cox
Abstract:
Accurate and efficient theoretical techniques for describing ionic fluids are highly desirable for many applications across the physical, biological and materials sciences. With a rigorous statistical mechanical foundation, classical density functional theory (cDFT) is an appealing approach, but the competition between strong Coulombic interactions and steric repulsion limits the accuracy of curre…
▽ More
Accurate and efficient theoretical techniques for describing ionic fluids are highly desirable for many applications across the physical, biological and materials sciences. With a rigorous statistical mechanical foundation, classical density functional theory (cDFT) is an appealing approach, but the competition between strong Coulombic interactions and steric repulsion limits the accuracy of current approximate functionals. Here, we extend a recently presented machine learning (ML) approach [Sammüller et al., Proc. Natl. Acad. Sci. USA, 120, e2312484120 (2023)] designed for systems with short-ranged interactions to ionic fluids. By adopting ideas from local molecular field theory, the framework we present amounts to using neural networks to learn the local relationship between the one-body direct correlation functions and inhomogeneous density profiles for a "mimic'' short-ranged system, with effects of long-ranged interactions accounted for in a mean-field, yet well-controlled, manner. By comparing to results from molecular simulations, we show that our approach accurately describes the structure and thermodynamics of prototypical models for electrolyte solutions and ionic liquids, including size-asymmetric and multivalent systems. The framework we present acts as an important step toward extending ML approaches for cDFT to systems with accurate interatomic potentials.
△ Less
Submitted 6 April, 2025; v1 submitted 3 October, 2024;
originally announced October 2024.
-
Language agents achieve superhuman synthesis of scientific knowledge
Authors:
Michael D. Skarlinski,
Sam Cox,
Jon M. Laurent,
James D. Braza,
Michaela Hinks,
Michael J. Hammerling,
Manvitha Ponnapati,
Samuel G. Rodriques,
Andrew D. White
Abstract:
Language models are known to hallucinate incorrect information, and it is unclear if they are sufficiently accurate and reliable for use in scientific research. We developed a rigorous human-AI comparison methodology to evaluate language model agents on real-world literature search tasks covering information retrieval, summarization, and contradiction detection tasks. We show that PaperQA2, a fron…
▽ More
Language models are known to hallucinate incorrect information, and it is unclear if they are sufficiently accurate and reliable for use in scientific research. We developed a rigorous human-AI comparison methodology to evaluate language model agents on real-world literature search tasks covering information retrieval, summarization, and contradiction detection tasks. We show that PaperQA2, a frontier language model agent optimized for improved factuality, matches or exceeds subject matter expert performance on three realistic literature research tasks without any restrictions on humans (i.e., full access to internet, search tools, and time). PaperQA2 writes cited, Wikipedia-style summaries of scientific topics that are significantly more accurate than existing, human-written Wikipedia articles. We also introduce a hard benchmark for scientific literature research called LitQA2 that guided design of PaperQA2, leading to it exceeding human performance. Finally, we apply PaperQA2 to identify contradictions within the scientific literature, an important scientific task that is challenging for humans. PaperQA2 identifies 2.34 +/- 1.99 contradictions per paper in a random subset of biology papers, of which 70% are validated by human experts. These results demonstrate that language model agents are now capable of exceeding domain experts across meaningful tasks on scientific literature.
△ Less
Submitted 26 September, 2024; v1 submitted 10 September, 2024;
originally announced September 2024.
-
Revisiting the Green-Kubo relation for friction in nanofluidics
Authors:
Anna T. Bui,
Stephen J. Cox
Abstract:
A central aim of statistical mechanics is to establish connections between a system's microscopic fluctuations and its macroscopic response to a perturbation. For non-equilibrium transport properties, this amounts to establishing Green-Kubo (GK) relationships. In hydrodynamics, relating such GK expressions for liquid-solid friction to macroscopic slip boundary conditions has remained a long-standi…
▽ More
A central aim of statistical mechanics is to establish connections between a system's microscopic fluctuations and its macroscopic response to a perturbation. For non-equilibrium transport properties, this amounts to establishing Green-Kubo (GK) relationships. In hydrodynamics, relating such GK expressions for liquid-solid friction to macroscopic slip boundary conditions has remained a long-standing problem due to two challenges: (i) The GK running integral of the force autocorrelation function decays to zero rather than reaching a well-defined plateau value; and (ii) debates persist on whether such a transport coefficient measures an intrinsic interfacial friction or an effective friction in the system. Inspired by ideas from the coarse-graining community, we derive a GK relation for liquid-solid friction where the force autocorrelation is sampled with a constraint of momentum conservation in the liquid. Our expression does not suffer from the "plateau problem" and unambiguously measures an effective friction coefficient, in an analogous manner to Stokes' law. We further establish a link between the derived friction coefficient and the hydrodynamic slip length, enabling a straightforward assessment of continuum hydrodynamics across length scales. We find that continuum hydrodynamics describes the simulation results quantitatively for confinement length scales all the way down to 1 nm. Our approach amounts to a straightforward modification to the present standard method of quantifying interfacial friction from molecular simulations, making possible a sensible comparison between surfaces of vastly different slippage.
△ Less
Submitted 27 November, 2024; v1 submitted 11 September, 2024;
originally announced September 2024.
-
Orthonormalization of phase-only basis functions
Authors:
Daniël W. S. Cox,
Ivo M. Vellekoop
Abstract:
Orthonormal bases serve as a powerful mathematical tool in theoretical and experimental optics. However, producing arbitrary optical fields in real-world experiments is limited by the hardware, which in many cases involves a phase-only spatial light modulator. Since most basis functions also have a varying amplitude component, they cannot be represented truthfully. We present a general method to c…
▽ More
Orthonormal bases serve as a powerful mathematical tool in theoretical and experimental optics. However, producing arbitrary optical fields in real-world experiments is limited by the hardware, which in many cases involves a phase-only spatial light modulator. Since most basis functions also have a varying amplitude component, they cannot be represented truthfully. We present a general method to construct an orthonormal phase-only basis, optionally possessing desirable properties like smoothness and symmetry. We demonstrate the practical benefit of our approach in a wavefront shaping experiment, achieving a factor 1.5 increase in performance over a non-orthonormal phase only basis.
△ Less
Submitted 6 September, 2024;
originally announced September 2024.
-
Practical considerations for high-fidelity wavefront shaping experiments
Authors:
Bahareh Mastiani,
Daniël W. S. Cox,
Ivo M. Vellekoop
Abstract:
Wavefront shaping is a technique for directing light through turbid media. The theoretical aspects of wavefront shaping are well understood, and under near-ideal experimental conditions, accurate predictions for the expected signal enhancement can be given. In practice, however, there are many experimental factors that negatively affect the outcome of the experiment. Here, we present a comprehensi…
▽ More
Wavefront shaping is a technique for directing light through turbid media. The theoretical aspects of wavefront shaping are well understood, and under near-ideal experimental conditions, accurate predictions for the expected signal enhancement can be given. In practice, however, there are many experimental factors that negatively affect the outcome of the experiment. Here, we present a comprehensive overview of these experimental factors, including the effect of sample scattering properties, noise, and response of the spatial light modulator. We present simple means to identify experimental imperfections and to minimize their negative effect on the outcome of the experiment. This paper is accompanied by Python code for automatically quantifying experimental problems using the OpenWFS framework for running and simulating wavefront shaping experiments.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
A classical density functional theory for solvation across length scales
Authors:
Anna T. Bui,
Stephen J. Cox
Abstract:
A central aim of multiscale modeling is to use results from the Schrödinger Equation to predict phenomenology on length scales that far exceed those of typical molecular correlations. In this work, we present a new approach rooted in classical density functional theory (cDFT) that allows us to accurately describe the solvation of apolar solutes across length scales. Our approach builds on the Lum-…
▽ More
A central aim of multiscale modeling is to use results from the Schrödinger Equation to predict phenomenology on length scales that far exceed those of typical molecular correlations. In this work, we present a new approach rooted in classical density functional theory (cDFT) that allows us to accurately describe the solvation of apolar solutes across length scales. Our approach builds on the Lum-Chandler-Weeks (LCW) theory of hydrophobicity [K. Lum et al., J. Phys. Chem. B 103, 4570 (1999)] by constructing a free energy functional that uses a slowly-varying component of the density field as a reference. From a practical viewpoint, the theory we present is numerically simpler and generalizes to solutes with soft-core repulsion more easily than LCW theory. Furthermore, by assessing the local compressibility and its critical scaling behavior, we demonstrate that our LCW-style cDFT approach contains the physics of critical drying, which has been emphasized as an essential aspect of hydrophobicity by recent theories. As our approach is parameterized on the two-body direct correlation function of the uniform fluid and the liquid-vapor surface tension, it straightforwardly captures the temperature dependence of solvation. Moreover, we use our theory to describe solvation at a first-principles level, on length scales that vastly exceed what is accessible to molecular simulations.
△ Less
Submitted 10 September, 2024; v1 submitted 5 February, 2024;
originally announced February 2024.
-
Model-based aberration corrected microscopy inside a glass tube
Authors:
D. W. S. Cox,
T. Knop,
I. M. Vellekoop
Abstract:
Microscope objectives achieve near diffraction-limited performance only when used under the conditions they are designed for. In non-standard geometries, such as thick cover slips or curved surfaces, severe aberrations arise, inevitably impairing high-resolution imaging. Correcting such large aberrations using standard adaptive optics can be challenging: existing solutions are either not suited fo…
▽ More
Microscope objectives achieve near diffraction-limited performance only when used under the conditions they are designed for. In non-standard geometries, such as thick cover slips or curved surfaces, severe aberrations arise, inevitably impairing high-resolution imaging. Correcting such large aberrations using standard adaptive optics can be challenging: existing solutions are either not suited for strong aberrations, or require extensive feedback measurements, consequently taking a significant portion of the photon budget. We demonstrate that it is possible to pre-compute the corrections needed for high-resolution imaging inside a glass tube based on a priori information only. Our ray-tracing based method achieved over an order of magnitude increase in image contrast without the need for a feedback signal.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
The limit of macroscopic homogeneous ice nucleation at the nanoscale
Authors:
John A. Hayton,
Michael B. Davies,
Thomas F. Whale,
Angelos Michaelides,
Stephen J. Cox
Abstract:
Nucleation in small volumes of water has garnered renewed interest due to the relevance of pore condensation and freezing under conditions of low partial pressures of water, such as in the upper troposphere. Molecular simulations can in principle provide insight on this process at the molecular scale that is challenging to achieve experimentally. However, there are discrepancies in the literature…
▽ More
Nucleation in small volumes of water has garnered renewed interest due to the relevance of pore condensation and freezing under conditions of low partial pressures of water, such as in the upper troposphere. Molecular simulations can in principle provide insight on this process at the molecular scale that is challenging to achieve experimentally. However, there are discrepancies in the literature as to whether the rate in confined systems is enhanced or suppressed relative to bulk water at the same temperature and pressure. In this study, we investigate the extent to which the size of the critical nucleus and the rate at which it grows in thin films of water are affected by the thickness of the film. Our results suggest that nucleation remains bulk-like in films that are barely large enough accommodate a critical nucleus. This conclusion seems robust to the presence of physical confining boundaries. We also discuss the difficulties in unambiguously determining homogeneous nucleation rates in nanoscale systems, owing to the challenges in defining the volume. Our results suggest any impact on a film's thickness on the rate is largely inconsequential for present day experiments.
△ Less
Submitted 22 June, 2023;
originally announced June 2023.
-
14 Examples of How LLMs Can Transform Materials Science and Chemistry: A Reflection on a Large Language Model Hackathon
Authors:
Kevin Maik Jablonka,
Qianxiang Ai,
Alexander Al-Feghali,
Shruti Badhwar,
Joshua D. Bocarsly,
Andres M Bran,
Stefan Bringuier,
L. Catherine Brinson,
Kamal Choudhary,
Defne Circi,
Sam Cox,
Wibe A. de Jong,
Matthew L. Evans,
Nicolas Gastellu,
Jerome Genzling,
María Victoria Gil,
Ankur K. Gupta,
Zhi Hong,
Alishba Imran,
Sabine Kruschwitz,
Anne Labarre,
Jakub Lála,
Tao Liu,
Steven Ma,
Sauradeep Majumdar
, et al. (28 additional authors not shown)
Abstract:
Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon.
This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of mole…
▽ More
Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon.
This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of molecules and materials, designing novel interfaces for tools, extracting knowledge from unstructured data, and developing new educational applications.
The diverse topics and the fact that working prototypes could be generated in less than two days highlight that LLMs will profoundly impact the future of our fields. The rich collection of ideas and projects also indicates that the applications of LLMs are not limited to materials science and chemistry but offer potential benefits to a wide range of scientific disciplines.
△ Less
Submitted 14 July, 2023; v1 submitted 9 June, 2023;
originally announced June 2023.
-
ChemCrow: Augmenting large-language models with chemistry tools
Authors:
Andres M Bran,
Sam Cox,
Oliver Schilter,
Carlo Baldassari,
Andrew D White,
Philippe Schwaller
Abstract:
Over the last decades, excellent computational chemistry tools have been developed. Integrating them into a single platform with enhanced accessibility could help reaching their full potential by overcoming steep learning curves. Recently, large-language models (LLMs) have shown strong performance in tasks across domains, but struggle with chemistry-related problems. Moreover, these models lack ac…
▽ More
Over the last decades, excellent computational chemistry tools have been developed. Integrating them into a single platform with enhanced accessibility could help reaching their full potential by overcoming steep learning curves. Recently, large-language models (LLMs) have shown strong performance in tasks across domains, but struggle with chemistry-related problems. Moreover, these models lack access to external knowledge sources, limiting their usefulness in scientific applications. In this study, we introduce ChemCrow, an LLM chemistry agent designed to accomplish tasks across organic synthesis, drug discovery, and materials design. By integrating 18 expert-designed tools, ChemCrow augments the LLM performance in chemistry, and new capabilities emerge. Our agent autonomously planned and executed the syntheses of an insect repellent, three organocatalysts, and guided the discovery of a novel chromophore. Our evaluation, including both LLM and expert assessments, demonstrates ChemCrow's effectiveness in automating a diverse set of chemical tasks. Surprisingly, we find that GPT-4 as an evaluator cannot distinguish between clearly wrong GPT-4 completions and Chemcrow's performance. Our work not only aids expert chemists and lowers barriers for non-experts, but also fosters scientific advancement by bridging the gap between experimental and computational chemistry.
△ Less
Submitted 2 October, 2023; v1 submitted 11 April, 2023;
originally announced April 2023.
-
Liquid solution centrifugation for safe, scalable, and efficient isotope separation
Authors:
Joseph F. Wild,
Heng Chen,
Keyue Liang,
Jiayu Liu,
Stephen E. Cox,
Alex N. Halliday,
Yuan Yang
Abstract:
A general method of separating isotopes by centrifuging dissolved chemical compounds in a liquid solution is introduced. This technique can be applied to almost all elements and leads to large separation factors. The method has been demonstrated in several isotopic systems including Ca, Mo, O, and Li with single-stage selectivities of 1.046-1.067 per unit mass difference (e.g., 1.434 in 40Ca/48Ca,…
▽ More
A general method of separating isotopes by centrifuging dissolved chemical compounds in a liquid solution is introduced. This technique can be applied to almost all elements and leads to large separation factors. The method has been demonstrated in several isotopic systems including Ca, Mo, O, and Li with single-stage selectivities of 1.046-1.067 per unit mass difference (e.g., 1.434 in 40Ca/48Ca, 1.134 in 16O/18O), which are beyond the capabilities of various conventional methods of isotope enrichment. Equations are derived to model the process and the results agree with those of the experiments. The scalability of the technique has been demonstrated by performing a three-stage enrichment of 48Ca, and the scalability is more broadly supported through analogies to the gas centrifuge, whereby countercurrent centrifugation can further multiply the separation factor by 5-10 times per stage in a continuous process. Optimal centrifuge conditions and solutions can achieve both high-throughput and highly efficient isotope separation.
△ Less
Submitted 24 March, 2023;
originally announced March 2023.
-
Remembering the work of Phillip L. Geissler: A coda to his scientific trajectory
Authors:
Gregory R. Bowman,
Stephen J. Cox,
Christoph Dellago,
Kateri H. DuBay,
Joel D. Eaves,
Daniel A. Fletcher,
Layne B. Frechette,
Michael Grünwald,
Katherine Klymko,
JiYeon Ku,
Ahmad K. Omar,
Eran Rabani,
David R. Reichman,
Julia R. Rogers,
Andreana M. Rosnik,
Grant M. Rotskoff,
Anna R. Schneider,
Nadine Schwierz,
David A. Sivak,
Suriyanarayanan Vaikuntanathan,
Stephen Whitelam,
Asaph Widmer-Cooper
Abstract:
Phillip L. Geissler made important contributions to the statistical mechanics of biological polymers, heterogeneous materials, and chemical dynamics in aqueous environments. He devised analytical and computational methods that revealed the underlying organization of complex systems at the frontiers of biology, chemistry, and materials science. In this retrospective, we celebrate his work at these…
▽ More
Phillip L. Geissler made important contributions to the statistical mechanics of biological polymers, heterogeneous materials, and chemical dynamics in aqueous environments. He devised analytical and computational methods that revealed the underlying organization of complex systems at the frontiers of biology, chemistry, and materials science. In this retrospective, we celebrate his work at these frontiers.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Crumbling Crystals: On the Dissolution Mechanism of NaCl in Water
Authors:
Niamh O'Neill,
Christoph Schran,
Stephen J. Cox,
Angelos Michaelides
Abstract:
Life on Earth depends upon the dissolution of ionic salts in water, particularly NaCl. However, an atomistic scale understanding of the process remains elusive. Simulations lend themselves conveniently to studying dissolution since they provide the spatio-temporal resolution that can be difficult to obtain experimentally. Nevertheless, the complexity of various inter- and intra-molecular interacti…
▽ More
Life on Earth depends upon the dissolution of ionic salts in water, particularly NaCl. However, an atomistic scale understanding of the process remains elusive. Simulations lend themselves conveniently to studying dissolution since they provide the spatio-temporal resolution that can be difficult to obtain experimentally. Nevertheless, the complexity of various inter- and intra-molecular interactions require careful treatment and long time scale simulations, both of which are typically hindered by computational expense. Here, we use advances in machine learning potential methodology to resolve for the first time at an ab initio level of theory the dissolution mechanism of NaCl in water. The picture that emerges is that of a steady ion-wise unwrapping of the crystal preceding its rapid disintegration, reminiscent of crumbling. The onset of crumbling can be explained by a strong increase in the ratio of the surface to volume of the crystal. Overall, dissolution is comprised of a series of highly dynamical microscopic sub-processes, resulting in an inherently stochastic mechanism. These atomistic level insights now pave the way for a general understanding of dissolution mechanisms in other crystals, and the methodology is primed for more complex systems of recent interest such as water/salt interfaces under flow and salt crystals under confinement.
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
Collapse of a hemicatenoid bounded by a solid wall: instability and dynamics driven by surface Plateau border friction
Authors:
Christophe Raufaste,
Simon Cox,
Raymond E. Goldstein,
Adriana I. Pesci
Abstract:
The collapse of a catenoidal soap film when the rings supporting it are moved beyond a critical separation is a classic problem in interface motion in which there is a balance between surface tension and the inertia of the surrounding air, with film viscosity playing only a minor role. Recently [Goldstein, et al., Phys. Rev. E 104, 035105 (2021)], we introduced a variant of this problem in which t…
▽ More
The collapse of a catenoidal soap film when the rings supporting it are moved beyond a critical separation is a classic problem in interface motion in which there is a balance between surface tension and the inertia of the surrounding air, with film viscosity playing only a minor role. Recently [Goldstein, et al., Phys. Rev. E 104, 035105 (2021)], we introduced a variant of this problem in which the catenoid is bisected by a glass plate located in a plane of symmetry perpendicular to the rings, producing two identical hemicatenoids, each with a surface Plateau border (SPB) on the glass plate. Beyond the critical ring separation, the hemicatenoids collapse in a manner qualitatively similar to the bulk problem, but their motion is governed by the frictional forces arising from viscous dissipation in the SPBs. Here we present numerical studies of a model that includes classical friction laws for SPB motion on wet surfaces and show consistency with our experimental measurements of the temporal evolution of this process. This study can help explain the fragmentation of bubbles inside very confined geometries such as porous materials or microfluidic devices.
△ Less
Submitted 25 April, 2022;
originally announced April 2022.
-
Symmetric Molecular Dynamics
Authors:
Sam Cox,
Andrew D. White
Abstract:
We derive a formulation of molecular dynamics that generates only symmetric configurations. We implement it for all 2D planar and 3D space groups. An atlas of 2D Lennard-Jones crystals under all planar groups is created with symmetric molecular dynamics.
We derive a formulation of molecular dynamics that generates only symmetric configurations. We implement it for all 2D planar and 3D space groups. An atlas of 2D Lennard-Jones crystals under all planar groups is created with symmetric molecular dynamics.
△ Less
Submitted 17 June, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
Effect of Contact Angle on Capillary Pressure and Liquid Recovery from Angular Pore Channels
Authors:
Afshin Davarpanah,
Simon Cox
Abstract:
We predict the volume of liquid recovered from different-shaped prismatic channels following gas displacement. This recovery factor depends strongly on the contact angle at which the gas-liquid interfaces meet the walls of the channel. We show that scaling the contact angle by a critical value, dependent on the channel shape, leads to a master curve for the recovery factor.} Our numerical simulati…
▽ More
We predict the volume of liquid recovered from different-shaped prismatic channels following gas displacement. This recovery factor depends strongly on the contact angle at which the gas-liquid interfaces meet the walls of the channel. We show that scaling the contact angle by a critical value, dependent on the channel shape, leads to a master curve for the recovery factor.} Our numerical simulations with the Surface Evolver are supported by theoretical calculations for the capillary entry pressure in a channel with a triangular or rectangular cross-section and for the interface shape in a "scalloped" triangular channel formed between three parallel cylinders.
△ Less
Submitted 3 May, 2022; v1 submitted 21 February, 2022;
originally announced February 2022.
-
Prediction of the capillary pressure of fluid surrounding a cylinder representing an idealized rock structure in porous media
Authors:
Afshin Davarpanah,
Simon Cox
Abstract:
Liquids in oil-bearing porous media assume complex shapes that depend on the reservoir characteristics and the wetting properties of the liquid. The wide variation in the geometry of rock formations makes it difficult to accurately predict the capillary pressure of small volumes of liquid and hence the likelihood of being able to move it. Here we consider the situation in which a small volume of l…
▽ More
Liquids in oil-bearing porous media assume complex shapes that depend on the reservoir characteristics and the wetting properties of the liquid. The wide variation in the geometry of rock formations makes it difficult to accurately predict the capillary pressure of small volumes of liquid and hence the likelihood of being able to move it. Here we consider the situation in which a small volume of liquid surrounds an upright cylinder on a flat substrate and predict the shape that the liquid takes and its capillary pressure. We validate our predictions by comparing with Surface Evolver simulations for a range of contact angles and cylinder radii.
△ Less
Submitted 6 January, 2022; v1 submitted 6 September, 2021;
originally announced September 2021.
-
Interface shapes in microfluidic porous media: conditions allowing steady, simultaneous two-phase flow
Authors:
S. J. Cox,
A. Davarpanah,
W. R. Rossen
Abstract:
Microfluidic devices offer unique opportunities to directly observe multiphase flow in porous media. However, as a direct representation of flow in geological pore networks, conventional microfluidics face several challenges. One is that simultaneous two-phase flow is not possible in a 2D network without fluctuation occupancy of pores. Nonetheless, such flow is possible in a microfluidic network i…
▽ More
Microfluidic devices offer unique opportunities to directly observe multiphase flow in porous media. However, as a direct representation of flow in geological pore networks, conventional microfluidics face several challenges. One is that simultaneous two-phase flow is not possible in a 2D network without fluctuation occupancy of pores. Nonetheless, such flow is possible in a microfluidic network if wetting phase can form a bridge across the gap between solid surfaces at a pore constriction while non-wetting phase flows through the constriction. We call this phenomenon "bridging". Here we consider the conditions under which this is possible as a function of capillary pressure and geometry of the constriction. Using the Surface Evolver program, we determine conditions for stable interfaces in a constriction, the range of capillary pressures at which bridging can occur, and those where the wetting phase would invade and block the constriction to the flow of the non-wetting phase ("snap-off"). We assume that the channels have uniform depth, vertical walls, and flat bottom and top surfaces, and that one phase perfectly wets the solid surfaces. If the constriction is long and straight, snap-off occurs at the same capillary pressure as bridging. For long, curved channels, snap-off happens as liquid imbibes before bridging can occur. For constrictions between cylindrical pillars, however, there is a range of capillary pressures at which bridging is stable; the range is greater the narrower the diameter of the cylinders relative to the width of the constriction. For smaller-diameter pillars, snap-off as non-wetting phase invades a downstream pore body is not possible. We relate these results to the shape of pore networks commonly used in microfluidic studies of two-phase flow to consider whether two-phase flow is possible in these networks without fluctuating pore occupancy.
△ Less
Submitted 13 August, 2021; v1 submitted 11 August, 2021;
originally announced August 2021.
-
Mixed ramp-Gaussian basis sets for core-dependent properties: STO-RG and STO-R2G for Li-Ne
Authors:
Claudia S. Cox,
Juan Camilo Zapata,
Laura K. McKemmish
Abstract:
The traditional Gaussian basis sets used in modern quantum chemistry lack an electron-nuclear cusp, and hence struggle to accurately describe core electron properties. A recently introduced novel type of basis set, mixed ramp-Gaussians, introduce a new primitive function called a ramp function which addresses this issue. This paper introduces three new mixed ramp-Gaussian basis sets - STO-R, STO-R…
▽ More
The traditional Gaussian basis sets used in modern quantum chemistry lack an electron-nuclear cusp, and hence struggle to accurately describe core electron properties. A recently introduced novel type of basis set, mixed ramp-Gaussians, introduce a new primitive function called a ramp function which addresses this issue. This paper introduces three new mixed ramp-Gaussian basis sets - STO-R, STO-RG and STO-R2G, made from a linear combination of ramp and Gaussian primitive functions - which are derived from the single-core-zeta Slater basis sets for the elements Li to Ne. This derivation is done in an analogous fashion to the famous STO-$n$G basis sets. The STO-RG basis functions are found to outperform the STO-3G basis functions and STO-R2G outperforms STO-6G, both in terms of wavefunction fit and other key quantities such as the one-electron energy and the electron-nuclear cusp. The second part of this paper performs preparatory investigations into how standard all-Gaussian basis sets can be converted to ramp-Gaussian basis sets through modifying the core basis functions. Using a test case of the 6-31G basis set for carbon, we determined that the second Gaussian primitive is less important when fitting a ramp-Gaussian core basis function directly to an all-Gaussian core basis function than when fitting to a Slater basis function. Further, we identified the basis sets that are single-core-zeta and thus should be most straightforward to convert to mixed ramp-Gaussian basis sets in the future.
△ Less
Submitted 3 May, 2020;
originally announced May 2020.
-
An analytic velocity profile for pressure-driven flow of a Bingham fluid in a curved channel
Authors:
Tirion G. Roberts,
Simon J. Cox
Abstract:
We derive an expression for the velocity profile of a pressure-driven yield-stress fluid flow-ing around a two-dimensional concentric annulus. This result allows the prediction of the effects of channel curvature on the pressure gradient required to initiate flow for given yield stress, and for the width of the plug region and the flux through the channel at different curvatures. We use it to vali…
▽ More
We derive an expression for the velocity profile of a pressure-driven yield-stress fluid flow-ing around a two-dimensional concentric annulus. This result allows the prediction of the effects of channel curvature on the pressure gradient required to initiate flow for given yield stress, and for the width of the plug region and the flux through the channel at different curvatures. We use it to validate numerical simulations of the flow from a straight channel into a curved channel which show how the fluid first yields everywhere before reaching the predicted velocity profile.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
Semi-analytic velocity profile for a Bingham fluid in a curved channel
Authors:
Tirion G. Roberts,
Simon J. Cox
Abstract:
We derive an expression for the velocity profile of a pressure-driven yield-stress Bingham fluid flowing around a 2D concentric annulus. The formula requires the numerical solution of a nonlinear equation for the positions of the yield surfaces. The results allow the prediction of the effects of channel curvature on the pressure gradient required to initiate flow for given yield stress, and for th…
▽ More
We derive an expression for the velocity profile of a pressure-driven yield-stress Bingham fluid flowing around a 2D concentric annulus. The formula requires the numerical solution of a nonlinear equation for the positions of the yield surfaces. The results allow the prediction of the effects of channel curvature on the pressure gradient required to initiate flow for given yield stress, and for the width of the plug region and the flux through the channel at different curvatures.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
Ice is Born in Low-Mobility Regions of Supercooled Liquid Water
Authors:
Martin Fitzner,
Gabriele C. Sosso,
Stephen J. Cox,
Angelos Michaelides
Abstract:
When an ice crystal is born from liquid water two key changes occur: (i) the molecules order; and (ii) the mobility of the molecules drops as they adopt their lattice positions. Most research on ice nucleation (and crystallization in general) has focused on understanding the former with less attention paid to the latter. However, supercooled water exhibits fascinating and complex dynamical behavio…
▽ More
When an ice crystal is born from liquid water two key changes occur: (i) the molecules order; and (ii) the mobility of the molecules drops as they adopt their lattice positions. Most research on ice nucleation (and crystallization in general) has focused on understanding the former with less attention paid to the latter. However, supercooled water exhibits fascinating and complex dynamical behavior, most notably dynamical heterogeneity (DH), a phenomenon where spatially separated domains of relatively mobile and immobile particles coexist. Strikingly, the microscopic connection between the DH of water and the nucleation of ice has yet to be unraveled directly at the molecular level. Here we tackle this issue via computer simulations which reveal that: (i) ice nucleation occurs in low-mobility regions of the liquid; (ii) there is a dynamical incubation period in which the mobility of the molecules drops prior to any ice-like ordering; and (iii) ice-like clusters cause arrested dynamics in surrounding water molecules. With this we establish a clear connection between dynamics and nucleation. We anticipate that our findings will pave the way for the examination of the role of dynamical heterogeneities in heterogeneous and solution-based nucleation.
△ Less
Submitted 5 December, 2018;
originally announced December 2018.
-
Demonstration and interpretation of "scutoid" cells in a quasi-2D soap froth
Authors:
A. Mughal,
S. J. Cox,
D. Weaire,
S. R. Burke,
S. Hutzler
Abstract:
Recently a novel type of epithelial cell has been discovered and dubbed the "scutoid". It is induced by curvature of the bounding surfaces. We show by simulations and experiments that such cells are to be found in a dry foam subjected to this boundary condition.
Recently a novel type of epithelial cell has been discovered and dubbed the "scutoid". It is induced by curvature of the bounding surfaces. We show by simulations and experiments that such cells are to be found in a dry foam subjected to this boundary condition.
△ Less
Submitted 22 September, 2018;
originally announced September 2018.
-
Interfacial ion solvation: Obtaining the thermodynamic limit from molecular simulations
Authors:
Stephen J. Cox,
Phillip L. Geissler
Abstract:
Inferring properties of macroscopic solutions from molecular simulations is complicated by the limited size of systems that can be feasibly examined with a computer. When long-ranged electrostatic interactions are involved, the resulting finite size effects can be substantial and may attenuate very slowly with increasing system size, as shown by previous work on dilute ions in bulk aqueous solutio…
▽ More
Inferring properties of macroscopic solutions from molecular simulations is complicated by the limited size of systems that can be feasibly examined with a computer. When long-ranged electrostatic interactions are involved, the resulting finite size effects can be substantial and may attenuate very slowly with increasing system size, as shown by previous work on dilute ions in bulk aqueous solution. Here we examine corrections for such effects, with an emphasis on solvation near interfaces. Our central assumption follows the perspective of Hünenberger and McCammon [J. Chem. Phys. 110, 1856 (1999)]: Long-wavelength solvent response underlying finite size effects should be well described by reduced models like dielectric continuum theory, whose size dependence can be calculated straightforwardly. Applied to an ion in a periodic slab of liquid coexisting with vapor, this approach yields a finite size correction for solvation free energies that differs in important ways from results previously derived for bulk solution. For a model polar solvent, we show that this new correction quantitatively accounts for the variation of solvation free energy with volume and aspect ratio of the simulation cell. Correcting periodic slab results for an aqueous system requires an additional accounting for the solvent's intrinsic charge asymmetry, which shifts electric potentials in a size-dependent manner. The accuracy of these finite size corrections establishes a simple method for a posteriori extrapolation to the thermodynamic limit, and also underscores the realism of dielectric continuum theory down to the nanometer scale.
△ Less
Submitted 13 August, 2018; v1 submitted 2 January, 2018;
originally announced January 2018.
-
The Many Faces of Heterogeneous Ice Nucleation: Interplay Between Surface Morphology and Hydrophobicity
Authors:
Martin Fitzner,
Gabriele C Sosso,
Stephen J Cox,
Angelos Michaelides
Abstract:
What makes a material a good ice nucleating agent? Despite the importance of heterogeneous ice nucleation to a variety of fields, from cloud science to microbiology, major gaps in our understanding of this ubiquitous process still prevent us from answering this question. In this work, we have examined the ability of generic crystalline substrates to promote ice nucleation as a function of the hydr…
▽ More
What makes a material a good ice nucleating agent? Despite the importance of heterogeneous ice nucleation to a variety of fields, from cloud science to microbiology, major gaps in our understanding of this ubiquitous process still prevent us from answering this question. In this work, we have examined the ability of generic crystalline substrates to promote ice nucleation as a function of the hydrophobicity and the morphology of the surface. Nucleation rates have been obtained by brute-force molecular dynamics simulations of coarse-grained water on top of different surfaces of a model fcc crystal, varying the water-surface interaction and the surface lattice parameter. It turns out that the lattice mismatch of the surface with respect to ice, customarily regarded as the most important requirement for a good ice nucleating agent, is at most desirable but not a requirement. On the other hand, the balance between the morphology of the surface and its hydrophobicity can significantly alter the ice nucleation rate and can also lead to the formation of up to three different faces of ice on the same substrate. We have pinpointed three circumstances where heterogeneous ice nucleation can be promoted by the crystalline surface: (i) the formation of a water overlayer that acts as an in-plane template; (ii) the emergence of a contact layer buckled in an ice-like manner; and (iii) nucleation on compact surfaces with very high interaction strength. We hope that this extensive systematic study will foster future experimental work aimed at testing the physiochemical understanding presented herein.
△ Less
Submitted 25 November, 2016;
originally announced November 2016.
-
Toward Accurate Adsorption Energetics on Clay Surfaces
Authors:
Andrea Zen,
Loïc M Roch,
Stephen J Cox,
Xiao L Hu,
Sandro Sorella,
Dario Alfè,
Angelos Michaelides
Abstract:
Clay minerals are ubiquitous in nature, and the manner in which they interact with their surroundings has important industrial and environmental implications. Consequently, a molecular-level understanding of the adsorption of molecules on clay surfaces is crucial. In this regard computer simulations play an important role, yet the accuracy of widely used empirical force fields (FF) and density fun…
▽ More
Clay minerals are ubiquitous in nature, and the manner in which they interact with their surroundings has important industrial and environmental implications. Consequently, a molecular-level understanding of the adsorption of molecules on clay surfaces is crucial. In this regard computer simulations play an important role, yet the accuracy of widely used empirical force fields (FF) and density functional theory (DFT) exchange-correlation functionals is often unclear in adsorption systems dominated by weak interactions. Herein we present results from quantum Monte Carlo (QMC) for water and methanol adsorption on the prototypical clay kaolinite. To the best of our knowledge, this is the first time QMC has been used to investigate adsorption at a complex, natural surface such as a clay. As well as being valuable in their own right, the QMC benchmarks obtained provide reference data against which the performance of cheaper DFT methods can be tested. Indeed using various DFT exchange-correlation functionals yields a very broad range of adsorption energies, and it is unclear a priori which evaluation is better. QMC reveals that in the systems considered here it is essential to account for van der Waals (vdW) dispersion forces since this alters both the absolute and relative adsorption energies of water and methanol. We show, via FF simulations, that incorrect relative energies can lead to significant changes in the interfacial densities of water and methanol solutions at the kaolinite interface. Despite the clear improvements offered by the vdW-corrected and the vdW-inclusive functionals, absolute adsorption energies are often overestimated, suggesting that the treatment of vdW forces in DFT is not yet a solved problem.
△ Less
Submitted 17 November, 2016;
originally announced November 2016.
-
Structured populations facilitate cooperation in policed Public Goods Games
Authors:
Gereon A. Kaiping,
Timothy J. Sluckin,
Simon J. Cox
Abstract:
Societies consisting of cooperative individuals seem to require for their continuing success that defectors be policed. The precise connection between punishers and benefits, population structure, and division of labour, however, remains ill-understood. Many models assume costly "peer punishment" to enforce cooperation, but results in the economics literature suggest that this assumption may not b…
▽ More
Societies consisting of cooperative individuals seem to require for their continuing success that defectors be policed. The precise connection between punishers and benefits, population structure, and division of labour, however, remains ill-understood. Many models assume costly "peer punishment" to enforce cooperation, but results in the economics literature suggest that this assumption may not be generally valid. In many human and animal societies, there is a division of labour between a purely supportive majority and a dedicated minority of police-like enforcers. Here we present several extensions to the Public Goods Game with punishment which allow for this possibility, and evaluate their influence on the level of cooperative behaviour. We find that a structure of separate subpopulations, which only interact through migration of individuals, can have a strong effect on the evolutionary dynamics of a system and significantly facilitate cooperation. Forcing defectors to contribute and enabling fitness transfers to punishers both have a weak positive effect on cooperation levels. In the presence of group competition, however, evolutionary effects can paradoxically hinder cooperation.
△ Less
Submitted 9 December, 2015; v1 submitted 13 March, 2015;
originally announced March 2015.
-
Molecular simulations of heterogeneous ice nucleation. II. Peeling back the layers
Authors:
Stephen J. Cox,
Shawn M. Kathmann,
Ben Slater,
Angelos Michaelides
Abstract:
Coarse grained molecular dynamics simulations are presented in which the sensitivity of the ice nucleation rate to the hydrophilicity of a graphene nanoflake is investigated. We find that an optimal interaction strength for promoting ice nucleation exists, which coincides with that found previously for a face centered cubic (111) surface. We further investigate the role that the layering of interf…
▽ More
Coarse grained molecular dynamics simulations are presented in which the sensitivity of the ice nucleation rate to the hydrophilicity of a graphene nanoflake is investigated. We find that an optimal interaction strength for promoting ice nucleation exists, which coincides with that found previously for a face centered cubic (111) surface. We further investigate the role that the layering of interfacial water plays in heterogeneous ice nucleation and demonstrate that the extent of layering is not a good indicator of ice nucleating ability for all surfaces. Our results suggest that to be an efficient ice nucleating agent, a surface should not bind water too strongly if it is able to accommodate high coverages of water.
△ Less
Submitted 28 May, 2015; v1 submitted 8 January, 2015;
originally announced January 2015.
-
Structure-dependent mobility of a dry aqueous foam flowing along two parallel channels
Authors:
Sian A. Jones,
Benjamin Dollet,
Yves Méheust,
Simon J. Cox,
Isabelle Cantat
Abstract:
The velocity of a two-dimensional aqueous foam has been measured as it flows through two parallel channels, at a constant overall volumetric flow rate. The flux distribution between the two channels is studied as a function of the ratio of their widths. A peculiar dependence of the velocity ratio on the width ratio is observed when the foam structure in the narrower channel is either single stairc…
▽ More
The velocity of a two-dimensional aqueous foam has been measured as it flows through two parallel channels, at a constant overall volumetric flow rate. The flux distribution between the two channels is studied as a function of the ratio of their widths. A peculiar dependence of the velocity ratio on the width ratio is observed when the foam structure in the narrower channel is either single staircase or bamboo. In particular, discontinuities in the velocity ratios are observed at the transitions between double and single staircase and between single staircase and bamboo. A theoretical model accounting for the viscous dissipation at the solid wall and the capillary pressure across a film pinned at the channel outlet predicts the observed non-monotonic evolution of the velocity ratio as a function of the width ratio. It also predicts quantitatively the intermittent temporal evolution of the velocity in the narrower channel when it is so narrow that film pinning at its outlet repeatedly brings the flow to a near stop.
△ Less
Submitted 10 September, 2013;
originally announced September 2013.
-
Elasto-plastic flow of a foam around an obstacle
Authors:
François Boulogne,
Simon Cox
Abstract:
We simulate quasistatic flows of an ideal two-dimensional monodisperse foam around different obstacles, both symmetric and asymmetric, in a channel. We record both pressure and network contributions to the drag and lift forces, and study them as a function of obstacle geometry. We show that the drag force increases linearly with the cross section of an obstacles. The lift on an asymmetric aerofoil…
▽ More
We simulate quasistatic flows of an ideal two-dimensional monodisperse foam around different obstacles, both symmetric and asymmetric, in a channel. We record both pressure and network contributions to the drag and lift forces, and study them as a function of obstacle geometry. We show that the drag force increases linearly with the cross section of an obstacles. The lift on an asymmetric aerofoil-like shape is negative and increases with its arc length, mainly due to the pressure contribution.
△ Less
Submitted 27 February, 2012;
originally announced February 2012.
-
Discrete solitons in electromechanical resonators
Authors:
M. Syafwan,
H. Susanto,
S. M. Cox
Abstract:
We consider a parametrically driven Klein--Gordon system describing micro- and nano-devices, with integrated electrical and mechanical functionality. Using a multiscale expansion method we reduce the system to a discrete nonlinear Schrodinger equation. Analytical and numerical calculations are performed to determine the existence and stability of fundamental bright and dark discrete solitons adm…
▽ More
We consider a parametrically driven Klein--Gordon system describing micro- and nano-devices, with integrated electrical and mechanical functionality. Using a multiscale expansion method we reduce the system to a discrete nonlinear Schrodinger equation. Analytical and numerical calculations are performed to determine the existence and stability of fundamental bright and dark discrete solitons admitted by the Klein--Gordon system through the discrete Schrodinger equation. We show that a parametric driving can not only destabilize onsite bright solitons, but also stabilize intersite bright discrete solitons and onsite and intersite dark solitons. Most importantly, we show that there is a range of values of the driving coefficient for which dark solitons are stable, for any value of the coupling constant, i.e. oscillatory instabilities are totally suppressed. Stability windows of all the fundamental solitons are presented and approximations to the onset of instability are derived using perturbation theory, with accompanying numerical results. Numerical integrations of the Klein--Gordon equation are performed, confirming the relevance of our analysis.
△ Less
Submitted 31 July, 2009;
originally announced July 2009.
-
Persistent localized states for a chaotically mixed bistable reaction
Authors:
Stephen M. Cox
Abstract:
We describe the evolution of a bistable chemical reaction in a closed two-dimensional chaotic laminar flow, from a localized initial disturbance. When the fluid mixing is sufficiently slow, the disturbance may spread and eventually occupy the entire fluid domain. By contrast, rapid mixing tends to dilute the initial state and so extinguish the disturbance. Such a dichotomy is well known. However…
▽ More
We describe the evolution of a bistable chemical reaction in a closed two-dimensional chaotic laminar flow, from a localized initial disturbance. When the fluid mixing is sufficiently slow, the disturbance may spread and eventually occupy the entire fluid domain. By contrast, rapid mixing tends to dilute the initial state and so extinguish the disturbance. Such a dichotomy is well known. However, we report here a hitherto apparently unremarked intermediate case, a persistent highly localized disturbance. Such a localized state arises when the Damkoehler number is great enough to sustain a hotspot, but not so great as to lead to global spread. We show that such a disturbance is located in the neighborhood of an unstable periodic orbit of the flow, and we describe some limited aspects of its behavior using a reduced, lamellar model.
△ Less
Submitted 15 August, 2006;
originally announced August 2006.
-
Efficient Methods for Handling Long-Range Forces in Particle-Particle Simulations
Authors:
Hans Fangohr,
Andrew R. Price,
Simon J. Cox,
Peter A. J. de Groot,
Geoffrey J. Daniell,
Ken S. Thomas
Abstract:
A number of problems arise when long-range forces, such as those governed by Bessel functions, are used in particle-particle simulations. If a simple cut-off for the interaction is used, the system may find an equilibrium configuration at zero temperature that is not a regular lattice yet has an energy lower than the theoretically predicted minimum for the physical system. We demonstrate two met…
▽ More
A number of problems arise when long-range forces, such as those governed by Bessel functions, are used in particle-particle simulations. If a simple cut-off for the interaction is used, the system may find an equilibrium configuration at zero temperature that is not a regular lattice yet has an energy lower than the theoretically predicted minimum for the physical system. We demonstrate two methods to overcome these problems in Monte Carlo and molecular dynamics simulations. The first uses a smoothed potential to truncate the interaction in a single unit cell: this is appropriate for phenomenological characterisations, but may be applied to any potential. The second is a new method for summing the unmodified potential in an infinitely tiled periodic system, which is in excess of 20,000 times faster than previous naive methods which add periodic images in shells of increasing radius: this is suitable for quantitative studies. Finally we show that numerical experiments which do not handle the long-range force carefully may give misleading results: both of our proposed methods overcome these problems.
△ Less
Submitted 15 August, 2000; v1 submitted 10 April, 2000;
originally announced April 2000.
