-
Pressure-Induced Separation of a Laminar Boundary Layer over a Partially-Slip Wall
Authors:
Benjamin Kellum Cooper,
Benjamin S. Savino,
John Marshall Cooper,
Taiho Yeom,
Wen Wu
Abstract:
The characteristics of pressure-induced laminar separation bubbles (LSBs) over a partially-slip wall, compared with that over a canonical no-slip wall, are studied using direct numerical simulation. Three cases, two utilizing linear Robin-type slip boundary conditions of differing slip length ($Λ$), and one non-slip are compared. For the partial-slip cases, a streamwise distribution of slip profil…
▽ More
The characteristics of pressure-induced laminar separation bubbles (LSBs) over a partially-slip wall, compared with that over a canonical no-slip wall, are studied using direct numerical simulation. Three cases, two utilizing linear Robin-type slip boundary conditions of differing slip length ($Λ$), and one non-slip are compared. For the partial-slip cases, a streamwise distribution of slip profile is employed ensuring smooth transition between no-slip and partial-slip (transition from no-slip to a constant slip length takes 5$δ$, where $δ$ is the inflow boundary layer thickness). The constant target slip length is maintained for $20δ$ upstream and during the onset of flow separation. The separation is induced by a wall-normal velocity profile applied at the top boundary. All cases are performed at $Re_δ= U_{\infty}δ/ν= 455$. Initial results indicate that as slip length increases, separation and reattachment are delayed. Most notably, the formation and shedding of roller vortices is mitigated as slip length increases, resulting in a less turbulent wake, despite that self-similarity of the plane shear layer is maintained.
△ Less
Submitted 13 August, 2024;
originally announced August 2024.
-
Separation of a Laminar Boundary Layer Subjected to Pressure Gradients with Spanwise Variations
Authors:
John Marshall Cooper,
Benjamin S. Savino,
Benjamin Kellum Cooper,
Wen Wu
Abstract:
The characteristics of three-dimensional laminar separation bubbles (LSBs), compared with their quasi-two-dimensional counterparts, are studied using direct numerical simulation. A three-dimensional suction-blowing distribution is applied on the top boundary to induce flow separation. Three levels of suction strength (i.e., adverse pressure gradient (APG) strength) are tested. For each suction lev…
▽ More
The characteristics of three-dimensional laminar separation bubbles (LSBs), compared with their quasi-two-dimensional counterparts, are studied using direct numerical simulation. A three-dimensional suction-blowing distribution is applied on the top boundary to induce flow separation. Three levels of suction strength (i.e., adverse pressure gradient (APG) strength) are tested. For each suction level, the spanwise extent of the suction is varied. Two non-uniform suction distributions are compared with uniformly-applied suction across the full span (implying a two-dimensional LSB), totaling nine cases. All cases are performed at $Re_δ= U_{\infty}δ/ν= 1000$ based on the inflow boundary layer thickness ($δ$) and free-stream velocity ($U_{\infty}$). Initial results indicate stark contrast between three-dimensional and two-dimensional LSBs. Most notably, the role of suction width is determining the topology of the LSB and its reattachment mechanism. Meanwhile, APG is responsible for determining the size of the LSB and level of turbulence at reattachment. Streamwise-oriented vortices are identified along the crest of the three-dimensional LSBs.
△ Less
Submitted 18 November, 2024; v1 submitted 12 August, 2024;
originally announced August 2024.
-
Jointed Tails Enhance Control of Three-dimensional Body Rotation
Authors:
Xun Fu,
Bohao Zhang,
Ceri J. Weber,
Kimberly L. Cooper,
Ram Vasudevan,
Talia Y. Moore
Abstract:
Tails used as inertial appendages induce body rotations of animals and robots, a phenomenon that is governed largely by the ratio of the body and tail moments of inertia. However, vertebrate tails have more degrees of freedom (e.g., number of joints, rotational axes) than most current theoretical models and robotic tails. To understand how morphology affects inertial appendage function, we develop…
▽ More
Tails used as inertial appendages induce body rotations of animals and robots, a phenomenon that is governed largely by the ratio of the body and tail moments of inertia. However, vertebrate tails have more degrees of freedom (e.g., number of joints, rotational axes) than most current theoretical models and robotic tails. To understand how morphology affects inertial appendage function, we developed an optimization-based approach that finds the maximally effective tail trajectory and measures error from a target trajectory. For tails of equal total length and mass, increasing the number of equal-length joints increased the complexity of maximally effective tail motions. When we optimized the relative lengths of tail bones while keeping the total tail length, mass, and number of joints the same, this optimization-based approach found that the lengths match the pattern found in the tail bones of mammals specialized for inertial maneuvering. In both experiments, adding joints enhanced the performance of the inertial appendage, but with diminishing returns, largely due to the total control effort constraint. This optimization-based simulation can compare the maximum performance of diverse inertial appendages that dynamically vary in moment of inertia in 3D space, predict inertial capabilities from skeletal data, and inform the design of robotic inertial appendages.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Optimising experimental design in neutron reflectometry
Authors:
James H. Durant,
Lucas Wilkins,
Joshaniel F. K. Cooper
Abstract:
Using the Fisher information (FI), the design of neutron reflectometry experiments can be optimised, leading to greater confidence in parameters of interest and better use of experimental time [Durant, Wilkins, Butler, & Cooper (2021). J. Appl. Cryst. 54, 1100-1110]. In this work, the FI is utilised in optimising the design of a wide range of reflectometry experiments. Two lipid bilayer systems ar…
▽ More
Using the Fisher information (FI), the design of neutron reflectometry experiments can be optimised, leading to greater confidence in parameters of interest and better use of experimental time [Durant, Wilkins, Butler, & Cooper (2021). J. Appl. Cryst. 54, 1100-1110]. In this work, the FI is utilised in optimising the design of a wide range of reflectometry experiments. Two lipid bilayer systems are investigated to determine the optimal choice of measurement angles and liquid contrasts, in addition to the ratio of the total counting time that should be spent measuring each condition. The reduction in parameter uncertainties with the addition of underlayers to these systems is then quantified, using the FI, and validated through the use of experiment simulation and Bayesian sampling methods. For a "one-shot" measurement of a degrading lipid monolayer, it is shown that the common practice of measuring null-reflecting water is indeed optimal, but that the optimal measurement angle is dependent on the deuteration state of the monolayer. Finally, the framework is used to demonstrate the feasibility of measuring magnetic signals as small as $0.01μ_{B}/\text{atom}$ in layers only $20Å$ thick, given the appropriate experimental design, and that time to reach a given level of confidence in the small magnetic moment is quantifiable.
△ Less
Submitted 7 February, 2022; v1 submitted 12 August, 2021;
originally announced August 2021.
-
Determining the maximum information gain and optimising experimental design in neutron reflectometry using the Fisher information
Authors:
James H. Durant,
Lucas Wilkins,
Keith Butler,
Joshaniel F. K. Cooper
Abstract:
An approach based on the Fisher information (FI) is developed to quantify the maximum information gain and optimal experimental design in neutron reflectometry experiments. In these experiments, the FI can be analytically calculated and used to provide sub-second predictions of parameter uncertainties. This approach can be used to influence real-time decisions about measurement angle, measurement…
▽ More
An approach based on the Fisher information (FI) is developed to quantify the maximum information gain and optimal experimental design in neutron reflectometry experiments. In these experiments, the FI can be analytically calculated and used to provide sub-second predictions of parameter uncertainties. This approach can be used to influence real-time decisions about measurement angle, measurement time, contrast choice and other experimental conditions based on parameters of interest. The FI provides a lower bound on parameter estimation uncertainties and these are shown to decrease with the square root of measurement time, providing useful information for the planning and scheduling of experimental work. As the FI is computationally inexpensive to calculate, it can be computed repeatedly during the course of an experiment, saving costly beam time by signalling that sufficient data has been obtained; or saving experimental datasets by signalling that an experiment needs to continue. The approach's predictions are validated through the introduction of an experiment simulation framework that incorporates instrument-specific incident flux profiles, and through the investigation of measuring the structural properties of a phospholipid bilayer.
△ Less
Submitted 1 June, 2021; v1 submitted 16 March, 2021;
originally announced March 2021.
-
The spatial collection efficiency of photogenerated charge carriers in photovoltaic and photoelectrochemical devices
Authors:
Gideon Segev,
Hen Dotan,
David S. Ellis,
Yifat Piekner,
Dino Klotz,
Jeffrey W. Beeman,
Jason K. Cooper,
Daniel A. Grave,
Ian D. Sharp,
Avner Rothschild
Abstract:
The spatial collection efficiency portrays the driving forces and loss mechanisms in photovoltaic and photoelectrochemical devices. It is defined as the fraction of photogenerated charge carriers created at a specific point within the device that contribute to the photocurrent. In stratified planar structures, the spatial collection efficiency can be extracted out of photocurrent action spectra me…
▽ More
The spatial collection efficiency portrays the driving forces and loss mechanisms in photovoltaic and photoelectrochemical devices. It is defined as the fraction of photogenerated charge carriers created at a specific point within the device that contribute to the photocurrent. In stratified planar structures, the spatial collection efficiency can be extracted out of photocurrent action spectra measurements empirically, with few a priori assumptions. Although this method was applied to photovoltaic cells made of well-understood materials, it has never been used to study unconventional materials such as metal-oxide semiconductors that are often employed in photoelectrochemical cells. This perspective shows the opportunities that this method has to offer for investigating new materials and devices with unknown properties. The relative simplicity of the method, and its applicability to operando performance characterization, makes it an important tool for analysis and design of new photovoltaic and photoelectrochemical materials and devices.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
A general approach to maximise information density in neutron reflectometry analysis
Authors:
Andrew R. McCluskey,
Thomas Arnold,
Joshaniel F. K. Cooper,
Tim Snow
Abstract:
Neutron and X-ray reflectometry are powerful techniques facilitating the study of the structure of interfacial materials. The analysis of these techniques is ill-posed in nature requiring the application of a model-dependent methods. This can lead to the over- and under- analysis of experimental data, when too many or too few parameters are allowed to vary in the model. In this work, we outline a…
▽ More
Neutron and X-ray reflectometry are powerful techniques facilitating the study of the structure of interfacial materials. The analysis of these techniques is ill-posed in nature requiring the application of a model-dependent methods. This can lead to the over- and under- analysis of experimental data, when too many or too few parameters are allowed to vary in the model. In this work, we outline a robust and generic framework for the determination of the set of free parameters that is capable of maximising the in-formation density of the model. This framework involves the determination of the Bayesian evidence for each permutation of free parameters; and is applied to a simple phospholipid monolayer. We believe this framework should become an important component in reflectometry data analysis, and hope others more regularly consider the relative evidence for their analytical models.
△ Less
Submitted 11 May, 2020; v1 submitted 23 October, 2019;
originally announced October 2019.
-
Deconvolution closure for mesoscopic continuum models of particle systems
Authors:
Alexander Panchenko,
Lyudmyla L. Barannyk,
Kevin Cooper
Abstract:
The paper introduces a general framework for derivation of continuum equations governing meso-scale dynamics of large particle systems. The balance equations for spatial averages such as density, linear momentum, and energy were previously derived by a number of authors. These equations are not in closed form because the stress and the heat flux cannot be evaluated without the knowledge of particl…
▽ More
The paper introduces a general framework for derivation of continuum equations governing meso-scale dynamics of large particle systems. The balance equations for spatial averages such as density, linear momentum, and energy were previously derived by a number of authors. These equations are not in closed form because the stress and the heat flux cannot be evaluated without the knowledge of particle positions and velocities. We propose a closure method for approximating fluxes in terms of other meso-scale averages. The main idea is to rewrite the non-linear averages as linear convolutions that relate micro- and meso-scale dynamical functions. The convolutions can be approximately inverted using regularization methods developed for solving ill-posed problems. This yields closed form constitutive equations that can be evaluated without solving the underlying ODEs. We test the method numerically on Fermi-Pasta-Ulam chains with two different potentials: the classical Lennard-Jones, and the purely repulsive potential used in granular materials modeling. The initial conditions incorporate velocity fluctuations on scales that are smaller than the size of the averaging window. The results show very good agreement between the exact stress and its closed form approximation.
△ Less
Submitted 27 September, 2011;
originally announced September 2011.
-
Role-similarity based comparison of directed networks
Authors:
Kathryn Cooper,
Mauricio Barahona
Abstract:
The widespread relevance of complex networks is a valuable tool in the analysis of a broad range of systems. There is a demand for tools which enable the extraction of meaningful information and allow the comparison between different systems. We present a novel measure of similarity between nodes in different networks as a generalization of the concept of self-similarity. A similarity matrix is as…
▽ More
The widespread relevance of complex networks is a valuable tool in the analysis of a broad range of systems. There is a demand for tools which enable the extraction of meaningful information and allow the comparison between different systems. We present a novel measure of similarity between nodes in different networks as a generalization of the concept of self-similarity. A similarity matrix is assembled as the distance between feature vectors that contain the in and out paths of all lengths for each node. Hence, nodes operating in a similar flow environment are considered similar regardless of network membership. We demonstrate that this method has the potential to be influential in tasks such as assigning identity or function to uncharacterized nodes. In addition an innovative application of graph partitioning to the raw results extends the concept to the comparison of networks in terms of their underlying role-structure.
△ Less
Submitted 29 March, 2011;
originally announced March 2011.
-
Role-based similarity in directed networks
Authors:
Kathryn Cooper,
Mauricio Barahona
Abstract:
The widespread relevance of increasingly complex networks requires methods to extract meaningful coarse-grained representations of such systems. For undirected graphs, standard community detection methods use criteria largely based on density of connections to provide such representations. We propose a method for grouping nodes in directed networks based on the role of the nodes in the network, un…
▽ More
The widespread relevance of increasingly complex networks requires methods to extract meaningful coarse-grained representations of such systems. For undirected graphs, standard community detection methods use criteria largely based on density of connections to provide such representations. We propose a method for grouping nodes in directed networks based on the role of the nodes in the network, understood in terms of patterns of incoming and outgoing flows. The role groupings are obtained through the clustering of a similarity matrix, formed by the distances between feature vectors that contain the number of in and out paths of all lengths for each node. Hence nodes operating in a similar flow environment are grouped together although they may not themselves be densely connected. Our method, which includes a scale factor that reveals robust groupings based on increasingly global structure, provides an alternative criterion to uncover structure in networks where there is an implicit flow transfer in the system. We illustrate its application to a variety of data from ecology, world trade and cellular metabolism.
△ Less
Submitted 13 December, 2010;
originally announced December 2010.
