-
Statistics of Large Impulsive Magnetic Events in the Auroral Zone
Authors:
Kyle Reiter,
Sébastien Guillon,
Martin Connors,
Brian Jackel
Abstract:
Impulsive geomagnetic variations, latitudinally localized to the auroral zone, have been observed over the period from 2015-2020. These impulsive events have been observed mostly in the pre-midnight sector as upward vertical perturbations. Diurnal variations in geomagnetically-triggered harmonic distortion events observed in Hydro-Québec's Système de Mesure de Décalage Angulaire (SMDA) synchrophas…
▽ More
Impulsive geomagnetic variations, latitudinally localized to the auroral zone, have been observed over the period from 2015-2020. These impulsive events have been observed mostly in the pre-midnight sector as upward vertical perturbations. Diurnal variations in geomagnetically-triggered harmonic distortion events observed in Hydro-Québec's Système de Mesure de Décalage Angulaire (SMDA) synchrophasor measurement system have been found to have a peak in the number of events around midnight. This was similar to diurnal rates of occurrence of negative $B_z$ geomagnetic impulsive events, observed at nearby auroral zone magnetometers. Superposed epoch analysis demonstrates the impulses are regularly associated with increases in harmonic distortion observed at a nearby substation transformer. These large impulsive vertical geomagnetic perturbations appear to be local vortical ionospheric disturbances.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Design and Beam Test Results for the 2D Projective sPHENIX Electromagnetic Calorimeter Prototype
Authors:
C. A. Aidala,
S. Altaf,
R. Belmont,
S. Boose,
D. Cacace,
M. Connors,
E. Desmond,
J. Frantz,
E. A. Gamez,
N. Grau,
J. S. Haggerty,
A. Hodges,
J. Huang,
Y. Kim,
M. D. Lenz,
W. Lenz,
N. A. Lewis,
E. J. Mannel,
J. D. Osborn,
D. V. Perepelitsa,
M. Phipps,
R. Pisani,
S. Polizzo,
A. Pun,
M. L. Purschke
, et al. (13 additional authors not shown)
Abstract:
sPHENIX is a new experiment under construction for the Relativistic Heavy Ion Collider at Brookhaven National Laboratory which will study the quark-gluon plasma to further the understanding of QCD matter and interactions. A prototype of the sPHENIX electromagnetic calorimeter (EMCal) was tested at the Fermilab Test Beam Facility in Spring 2018 as experiment T-1044. The EMCal prototype corresponds…
▽ More
sPHENIX is a new experiment under construction for the Relativistic Heavy Ion Collider at Brookhaven National Laboratory which will study the quark-gluon plasma to further the understanding of QCD matter and interactions. A prototype of the sPHENIX electromagnetic calorimeter (EMCal) was tested at the Fermilab Test Beam Facility in Spring 2018 as experiment T-1044. The EMCal prototype corresponds to a solid angle of $ Δη\times Δφ= 0.2 \times 0.2$ centered at pseudo-rapidity $η= 1$. The prototype consists of scintillating fibers embedded in a mix of tungsten powder and epoxy. The fibers project back approximately to the center of the sPHENIX detector, giving 2D projectivity. The energy response of the EMCal prototype was studied as a function of position and input energy. The energy resolution of the EMCal prototype was obtained after applying a position dependent energy correction and a beam profile correction. Two separate position dependent corrections were considered. The EMCal energy resolution was found to be $σ(E)/\langle E\rangle = 3.5(0.1) \oplus 13.3(0.2)/\sqrt{E}$ based on the hodoscope position dependent correction, and $σ(E)/\langle E\rangle = 3.0(0.1) \oplus 15.4(0.3)/\sqrt{E}$ based on the cluster position dependent correction. These energy resolution results meet the requirements of the sPHENIX physics program.
△ Less
Submitted 15 March, 2021; v1 submitted 27 March, 2020;
originally announced March 2020.
-
Evolution of the accretion disk-corona during bright hard-to-soft state transition: A reflection spectroscopic study with GX 339-4
Authors:
Navin Sridhar,
Javier A. García,
James F. Steiner,
Riley M. T. Connors,
Victoria Grinberg,
Fiona A. Harrison
Abstract:
We present the analysis of several observations of the black hole binary GX 339--4 during its bright intermediate states from two different outbursts (2002 and 2004), as observed by RXTE/PCA. We perform a consistent study of its reflection spectrum by employing the relxill family of relativistic reflection models to probe the evolutionary properties of the accretion disk including the inner disk r…
▽ More
We present the analysis of several observations of the black hole binary GX 339--4 during its bright intermediate states from two different outbursts (2002 and 2004), as observed by RXTE/PCA. We perform a consistent study of its reflection spectrum by employing the relxill family of relativistic reflection models to probe the evolutionary properties of the accretion disk including the inner disk radius ($R_{\rm in}$), ionization parameter ($ξ$), temperatures of the inner disk ($T_{\rm in}$), corona ($kT_{\rm e}$), and its optical depth ($τ$). Our analysis indicates that the disk inner edge approaches the inner-most stable circular orbit (ISCO) during the early onset of bright hard state, and that the truncation radius of the disk remains low ($\lesssim 14 R_{\rm g}$) throughout the transition from hard to soft state. This suggests that the changes observed in the accretion disk properties during the state transition are driven by variation in accretion rate, and not necessarily due to changes in the inner disk's radius. We compare the aforementioned disk properties in two different outbursts, with state transitions occurring at dissimilar luminosities, and find identical evolutionary trends in the disk properties, with differences only seen in corona's $kT_{\rm e}$ and $τ$. We also perform an analysis by employing a self-consistent Comptonized accretion disk model accounting for the scatter of disk photons by the corona, and measure low inner disk truncation radius across the bright intermediate states, using the temperature dependent values of spectral hardening factor, thereby independently confirming our results from the reflection spectrum analysis.
△ Less
Submitted 8 December, 2020; v1 submitted 24 December, 2019;
originally announced December 2019.
-
Identifying the magnetospheric driver of STEVE
Authors:
Xiangning Chu,
David Malaspina,
Bea Gallardo-Lacourt,
Jun Liang,
Laila Andersson,
Qianli Ma,
Anton Artemyev,
Jiang Liu,
Bob Ergun,
Scott Thaller,
Hassanali Akbari,
Hong Zhao,
Brian Larsen,
Geoffrey Reeves,
John Wygant,
Aaron Breneman,
Sheng Tian,
Martin Connors,
Eric Donovan,
William Archer,
Elizabeth A. MacDonald
Abstract:
For the first time, we identify the magnetospheric driver of STEVE, east-west aligned narrow emissions in the subauroral region. In the ionosphere, STEVE is associated with subauroral ion drift (SAID) features of high electron temperature peak, density gradient, and strong westward ion flow. In this study, we present STEVE's magnetospheric driver region at a sharp plasmapause containing: strong ta…
▽ More
For the first time, we identify the magnetospheric driver of STEVE, east-west aligned narrow emissions in the subauroral region. In the ionosphere, STEVE is associated with subauroral ion drift (SAID) features of high electron temperature peak, density gradient, and strong westward ion flow. In this study, we present STEVE's magnetospheric driver region at a sharp plasmapause containing: strong tailward quasi-static electric field, kinetic Alfven waves, parallel electron acceleration, perpendicular ion drift. The observed continuous emissions of STEVE are possibly caused by ionospheric electron heating due to heat conduction and/or auroral acceleration process powered by Alfven waves, both driven by the observed equatorial magnetospheric processes. The observed green emissions are likely optical manifestations of electron precipitations associated with wave structures traveling along the plasmapause. The observed SAR arc at lower latitudes likely corresponds to the formation of low-energy plasma inside the plasmapause by Coulomb collisions between ring current ions and plasmaspheric plasma.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
Laser radio transmitter
Authors:
Marco Piccardo,
Michele Tamagnone,
Benedikt Schwarz,
Paul Chevalier,
Noah A. Rubin,
Yongrui Wang,
Christine A. Wang,
Michael K. Connors,
Daniel McNulty,
Alexey Belyanin,
Federico Capasso
Abstract:
Since the days of Hertz, radio transmitters have evolved from rudimentary circuits emitting around 50 MHz to modern ubiquitous Wi-Fi devices operating at gigahertz radio bands. As wireless data traffic continues to increase there is a need for new communication technologies capable of high-frequency operation for high-speed data transfer. Here we give a proof of concept of a new compact radio freq…
▽ More
Since the days of Hertz, radio transmitters have evolved from rudimentary circuits emitting around 50 MHz to modern ubiquitous Wi-Fi devices operating at gigahertz radio bands. As wireless data traffic continues to increase there is a need for new communication technologies capable of high-frequency operation for high-speed data transfer. Here we give a proof of concept of a new compact radio frequency transmitter based on a semiconductor laser frequency comb. In this laser, the beating among the coherent modes oscillating inside the cavity generates a radio frequency current, which couples to the electrodes of the device. We show that redesigning the top contact of the laser allows one to exploit the internal oscillatory current to drive an integrated dipole antenna, which radiates into free space. In addition, direct modulation of the laser current permits encoding a signal in the radiated radio frequency carrier. Working in the opposite direction, the antenna can receive an external radio frequency signal, couple it to the active region and injection lock the laser. These results pave the way to new applications and functionality in optical frequency combs, such as wireless radio communication and wireless synchronization to a reference source.
△ Less
Submitted 21 January, 2019;
originally announced January 2019.
-
Single-mode instability in standing-wave lasers: The quantum cascade laser as a self-pumped parametric oscillator
Authors:
Tobias S. Mansuripur,
Camille Vernet,
Paul Chevalier,
Guillaume Aoust,
Benedikt Schwarz,
Feng Xie,
Catherine Caneau,
Kevin Lascola,
Chung-en Zah,
David P. Caffey,
Timothy Day,
Leo J. Missaggia,
Michael K. Connors,
Christine A. Wang,
Alexey Belyanin,
Federico Capasso
Abstract:
We report the observation of a clear single-mode instability threshold in continuous-wave Fabry-Perot quantum cascade lasers (QCLs). The instability is characterized by the appearance of sidebands separated by tens of free spectral ranges (FSR) from the first lasing mode, at a pump current not much higher than the lasing threshold. As the current is increased, higher-order sidebands appear that pr…
▽ More
We report the observation of a clear single-mode instability threshold in continuous-wave Fabry-Perot quantum cascade lasers (QCLs). The instability is characterized by the appearance of sidebands separated by tens of free spectral ranges (FSR) from the first lasing mode, at a pump current not much higher than the lasing threshold. As the current is increased, higher-order sidebands appear that preserve the initial spacing, and the spectra are suggestive of harmonically phase-locked waveforms. We present a theory of the instability that applies to all homogeneously broadened standing-wave lasers. The low instability threshold and the large sideband spacing can be explained by the combination of an unclamped, incoherent Lorentzian gain due to the population grating, and a coherent parametric gain caused by temporal population pulsations that changes the spectral gain line shape. The parametric term suppresses the gain of sidebands whose separation is much smaller than the reciprocal gain recovery time, while enhancing the gain of more distant sidebands. The large gain recovery frequency of the QCL compared to the FSR is essential to observe this parametric effect, which is responsible for the multiple-FSR sideband separation. We predict that by tuning the strength of the incoherent gain contribution, for example by engineering the modal overlap factors and the carrier diffusion, both amplitude-modulated (AM) or frequency-modulated emission can be achieved from QCLs. We provide initial evidence of an AM waveform emitted by a QCL with highly asymmetric facet reflectivities, thereby opening a promising route to ultrashort pulse generation in the mid-infrared. Together, the experiments and theory clarify a deep connection between parametric oscillation in optically pumped microresonators and the single-mode instability of lasers, tying together literature from the last 60 years.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Design and Beam Test Results for the sPHENIX Electromagnetic and Hadronic Calorimeter Prototypes
Authors:
C. A. Aidala,
V. Bailey,
S. Beckman,
R. Belmont,
C. Biggs,
J. Blackburn,
S. Boose,
M. Chiu,
M. Connors,
E. Desmond,
A. Franz,
J. S. Haggerty,
X. He,
M. M. Higdon,
J. Huang,
K. Kauder,
E. Kistenev,
J. LaBounty,
J. G. Lajoie,
M. Lenz,
W. Lenz,
S. Li,
V. R. Loggins,
E. J. Mannel,
T. Majoros
, et al. (25 additional authors not shown)
Abstract:
The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider (RHIC) will perform high precision measurements of jets and heavy flavor observables for a wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the…
▽ More
The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider (RHIC) will perform high precision measurements of jets and heavy flavor observables for a wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the sPHENIX calorimeter system was tested at the Fermilab Test Beam Facility as experiment T-1044 in the spring of 2016. The electromagnetic calorimeter (EMCal) prototype is composed of scintillating fibers embedded in a mixture of tungsten powder and epoxy. The hadronic calorimeter (HCal) prototype is composed of tilted steel plates alternating with plastic scintillator. Results of the test beam reveal the energy resolution for electrons in the EMCal is $2.8\%\oplus~15.5\%/\sqrt{E}$ and the energy resolution for hadrons in the combined EMCal plus HCal system is $13.5\%\oplus 64.9\%/\sqrt{E}$. These results demonstrate that the performance of the proposed calorimeter system satisfies the sPHENIX specifications.
△ Less
Submitted 16 December, 2018; v1 submitted 5 April, 2017;
originally announced April 2017.
-
Design, Construction, Operation and Performance of a Hadron Blind Detector for the PHENIX Experiment
Authors:
W. Anderson,
B. Azmoun,
A. Cherlin,
C. Y. Chi,
Z. Citron,
M. Connors,
A. Dubey,
J. M. Durham,
Z. Fraenkel,
T. Hemmick,
J. Kamin,
A. Kozlov,
B. Lewis,
M. Makek,
A. Milov,
M. Naglis,
V. Pantuev,
R. Pisani,
M. Proissl,
I. Ravinovich,
S. Rolnick,
T. Sakaguchi,
D. Sharma,
S. Stoll,
J. Sun
, et al. (2 additional authors not shown)
Abstract:
A Hadron Blind Detector (HBD) has been developed, constructed and successfully operated within the PHENIX detector at RHIC. The HBD is a Cherenkov detector operated with pure CF4. It has a 50 cm long radiator directly coupled in a window- less configuration to a readout element consisting of a triple GEM stack, with a CsI photocathode evaporated on the top surface of the top GEM and pad readout at…
▽ More
A Hadron Blind Detector (HBD) has been developed, constructed and successfully operated within the PHENIX detector at RHIC. The HBD is a Cherenkov detector operated with pure CF4. It has a 50 cm long radiator directly coupled in a window- less configuration to a readout element consisting of a triple GEM stack, with a CsI photocathode evaporated on the top surface of the top GEM and pad readout at the bottom of the stack. This paper gives a comprehensive account of the construction, operation and in-beam performance of the detector.
△ Less
Submitted 22 March, 2011;
originally announced March 2011.
