-
Smart Acoustic Lining for UHBR Technologies Engine Part 2: acoustic treatment at the intake of a scaled turbofan nacelle
Authors:
E. De Bono,
M. Collet,
K. Billon,
E. Salze,
H. Lissek,
M. Volery,
M. Ouisse,
J. Mardjono
Abstract:
The new generation of Ultra-High-By-Pass-Ratio (UHBR) turbofan engine while considerably reducing fuel consumption, threatens higher noise levels at low frequencies because of its larger diameter, lower number of blades and rotational speed. This is accompanied by a shorter nacelle, leaving less available space for acoustic treatments. In this context, a progress in the liner technology is highly…
▽ More
The new generation of Ultra-High-By-Pass-Ratio (UHBR) turbofan engine while considerably reducing fuel consumption, threatens higher noise levels at low frequencies because of its larger diameter, lower number of blades and rotational speed. This is accompanied by a shorter nacelle, leaving less available space for acoustic treatments. In this context, a progress in the liner technology is highly demanded, prospecting alternative solutions to classic liners. The SALUTE H2020 project has taken up this challenge, proposing electro-active acoustic liners, made up of loudspeakers (actuators) and microphones (sensors). The electro-active means allow to program the surface impedance on the electroacoustic liner, but also to conceive alternative boundary laws. Test-rigs of gradually increasing complexities have allowed to raise the Technology Readiness Level (TRL) up to 3-4. In this second part, the electroacoustic liner is adapted to treat the walls at the intake of a scaled turbofan nacelle. The performance of the electroacoustic liner demonstrate its potentialities for reducing noise radiation from turbofan.
△ Less
Submitted 4 August, 2024;
originally announced August 2024.
-
Smart Acoustic Lining for UHBR Technologies Engine Part 1: design of an electroacoustic liner and experimental characterization under flow in rectangular cross-section ducts
Authors:
E. De Bono,
M. Collet,
K. Billon,
E. Salze,
H. Lissek,
M. Volery,
M. Ouisse,
J. Mardjono
Abstract:
The new generation of Ultra-High-By-Pass-Ratio (UHBR) turbofan engine while considerably reducing fuel consumption, threatens higher noise levels at low frequencies because of its larger diameter, lower number of blades and rotational speed. This is accompanied by a shorter nacelle, leaving less available space for acoustic treatments. In this context, a progress in the liner technology is highly…
▽ More
The new generation of Ultra-High-By-Pass-Ratio (UHBR) turbofan engine while considerably reducing fuel consumption, threatens higher noise levels at low frequencies because of its larger diameter, lower number of blades and rotational speed. This is accompanied by a shorter nacelle, leaving less available space for acoustic treatments. In this context, a progress in the liner technology is highly demanded, prospecting alternative solutions to classic liners. The SALUTE H2020 project has taken up this challenge, proposing electro-active acoustic liners, made up of loudspeakers (actuators) and microphones (sensors). The electro-active means allow to program the surface impedance on the electroacoustic liner, but also to conceive alternative boundary laws. Test-rigs of gradually increasing complexities have allowed to raise the Technology Readiness Level (TRL) up to 3-4. In this first part, we describe the control laws employed in the experimental campaigns, and present the scattering performances in rectangular waveguides with monomodal guided propagation. These results have assessed the isolation capabilities, stability and robustness of such programmable boundary technology, allowing to gain confidence for the successive implementation in a scaled turbofan test-rig.
△ Less
Submitted 4 August, 2024;
originally announced August 2024.
-
Analytical and experimental results: creation of a duffing acoustic nonlinear oscillator at low amplitudes
Authors:
Maxime Morell,
Manuel Collet,
Emmanuel Gourdon,
Alireza Ture Savadkoohi,
Emanuele De Bono
Abstract:
Nonlinear dynamics have long been exploited in order to damp vibrations in solid mechanics. The phenomenon of irreversible energy transfer from a linear primary system to a nonlinear absorber has driven great attention to the optimal design of vibration absorbers both for stationary and transient regimes. Recently, the same principle has also been targeted in acoustics for the absorption of sound…
▽ More
Nonlinear dynamics have long been exploited in order to damp vibrations in solid mechanics. The phenomenon of irreversible energy transfer from a linear primary system to a nonlinear absorber has driven great attention to the optimal design of vibration absorbers both for stationary and transient regimes. Recently, the same principle has also been targeted in acoustics for the absorption of sound waves at high excitation amplitudes. Meanwhile, acoustic absorption by electro-active means has found great success for noise reduction in the linear regime. This study uses a method allowing the design of nonlinear resonators at amplitudes that typically induce linear behaviors. This research proposes an analytical study of the implementation of the duffing equation as a nonlinear electroacoustic resonator coupled to an acoustic mode of a tube. Experiments are carried out and compared to the analytical results. The experimental implementation is done using a real-time-based algorithm retrieving the measured pressure from a microphone and giving the electrical current to send to a loudspeaker as an output thanks to a Runge-Kutta-like algorithm.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
Design and experimental validation of a finite-size labyrinthine metamaterial for vibro-acoustics: enabling upscaling towards large-scale structures
Authors:
Svenja Hermann,
Kévin Billon,
Alina-Michelle Parlak,
Jeanette Orlowsky,
Manuel Collet,
Angela Madeo
Abstract:
In this paper, we present the design and experimental validation of a labyrinthine metamaterial for vibro-acoustic applications. Based on a 2D unit cell, different designs of finite-size metamaterial specimens in a sandwich configuration including two plates are proposed. The design phase includes an optimisation based on Bloch-Floquet analysis with the aims of maximising the band gap and extrudin…
▽ More
In this paper, we present the design and experimental validation of a labyrinthine metamaterial for vibro-acoustic applications. Based on a 2D unit cell, different designs of finite-size metamaterial specimens in a sandwich configuration including two plates are proposed. The design phase includes an optimisation based on Bloch-Floquet analysis with the aims of maximising the band gap and extruding the specimens in the third dimension while keeping the absorption properties almost unaffected. By manufacturing and experimentally testing finite-sized specimens, we assess their capacity to mitigate vibrations in vibro-impact tests. The experiments confirm a band gap in the low- to mid-frequency range. Numerical models are employed to validate the experiments and to examine additional vibro-acoustic load cases. The metamaterial's performances are compared to benchmark solutions, usually employed for noise and vibration mitigation, showing a comparable efficacy in the band gap region. To eventually improve the metamaterial's performance, we optimise its interaction with the air and test different types of connections between the metamaterial and the homogeneous plates. This finally leads to metamaterial samples largely exceeding the benchmark performances in the band gap region and reveal the potential of interfaces for performance optimisation of composed structures.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
The Advection Boundary Law in absence of mean flow: passivity, nonreciprocity and enhanced noise transmission attenuation
Authors:
Emanuele De Bono,
Manuel Collet,
Morvan Ouisse
Abstract:
Sound attenuation along a waveguide is intensively studied for applications ranging from heating and air-conditioning ventilation systems, to aircraft turbofan engines. In particular, the new generation of Ultra-High-By-Pass-Ratio turbofan requires higher attenuation at low frequencies, in less space for liner treatment. This demands to go beyond the classical acoustic liner concepts and overcome…
▽ More
Sound attenuation along a waveguide is intensively studied for applications ranging from heating and air-conditioning ventilation systems, to aircraft turbofan engines. In particular, the new generation of Ultra-High-By-Pass-Ratio turbofan requires higher attenuation at low frequencies, in less space for liner treatment. This demands to go beyond the classical acoustic liner concepts and overcome their limitations. In this paper, we discuss an unconventional boundary operator, called Advection Boundary Law, which can be artificially synthesized by electroactive means, such as Electroacoustic Resonators. This boundary condition entails nonreciprocal propagation, meanwhile enhancing noise transmission attenuation with respect to purely locally-reacting boundaries, along one sense of propagation. Because of its artificial nature though, its acoustical passivity limits are yet to be defined. In this paper, we provide a thorough numerical study to assess the performances of the Advection Boundary Law, in absence of mean flow. An experimental test-bench validates the numerical outcomes in terms of passivity limits, non-reciprocal propagation and enhanced isolation with respect to local impedance operators. This work provides the guidelines to properly implement the Advection Boundary Law for optimal noise transmission attenuation. Moreover, the tools and criteria provided here can also be employed for the design and characterization of other innovative liners.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Unfolding engineering metamaterials design: relaxed micromorphic modeling of large-scale acoustic meta-structures
Authors:
F. Demore,
G. Rizzi,
M. Collet,
P. Neff,
A. Madeo
Abstract:
In this paper, we present a unit cell showing a band-gap in the lower acoustic domain. The corresponding metamaterial is made up of a periodic arrangement of this unit cell. We rigorously show that the relaxed micromorphic model can be used for metamaterials' design at large scales as soon as suficiently large specimens are considered. We manufacture the metamaterial via metal etching procedures a…
▽ More
In this paper, we present a unit cell showing a band-gap in the lower acoustic domain. The corresponding metamaterial is made up of a periodic arrangement of this unit cell. We rigorously show that the relaxed micromorphic model can be used for metamaterials' design at large scales as soon as suficiently large specimens are considered. We manufacture the metamaterial via metal etching procedures applied to a titanium plate so as to show that its production for realistic applications is viable. Experimental tests are also carried out confirming that the metamaterials' response is in good agreement with the theoretical design. In order to show that our micromorphic model opens unprecedented possibilities in metastructural design, we conceive a finite-size structure that is able to focus elastic energy in a confined region, thus enabling its possible subsequent re-use. Indeed, thanks to the introduction of a well-posed set of micromorphic boundary conditions, we can combine different metamaterials and classical Cauchy materials in such a way that the elastic energy produced by a source of vibrations is focused in specific collection points. The design of this structure would have not been otherwise possible (via e.g., direct simulations), due to the large dimensions of the metastructure, couting hundreds of unit cells.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
Innovative Electroacoustic resonator Control enforcing Duffing dynamics at moderate excitation levels: conception and experimental validation
Authors:
Emanuele De Bono,
Maxime Morell,
Manuel Collet,
Emmanuel Gourdon,
Alireza Ture Savadkoohi,
Claude Henri Lamarque
Abstract:
The electroacoustic resonator is an effcient electro-active device for noise attenuation in enclosed cavities or acoustic waveguides. It is made of a loudspeaker (the actuator) and one or more microphones (the sensors). So far, the desired acoustic behaviour, expressed in terms of a linear relationship between sound pressure and vibrational motion, has been more efficiently achieved by a model-inv…
▽ More
The electroacoustic resonator is an effcient electro-active device for noise attenuation in enclosed cavities or acoustic waveguides. It is made of a loudspeaker (the actuator) and one or more microphones (the sensors). So far, the desired acoustic behaviour, expressed in terms of a linear relationship between sound pressure and vibrational motion, has been more efficiently achieved by a model-inversion strategy which is implemented by driving the electrical current in the loudspeaker coil, based upon the measured pressure. The corrector transfer function is hence digitally executed by the classical infinite-impulse response technique. In order to enforce non-linear, instead of linear, operators between the pressure and vibrational motion of the speaker diaphragm, in the same pressure-based, current-driven architecture, the transfer-function-based control strategies must be abandoned. In this manuscript, we present a novel technique based upon real-time integration of potentially any target dynamics (either linear or nonlinear). Then, we experimentally validate such control strategy by enforcing a Duffing type dynamics at excitation levels far below the linearity limit of the mechano-acoustical dynamics of the resonator. Such control strategy demonstrates to efficiently reproduce nonlinear operators, opening the doors for the experimental investigation of noise-control by a potentially vast spectrum of programmable non-linear boundaries, under the ordinary sound excitation levels.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Design and characterization of an instrumented slider aimed atmeasuring local micro-impact forces between dry rough solids
Authors:
Camille Grégoire,
Bernard Laulagnet,
Joël Perret Liaudet,
Thibaut Durand,
Manuel Collet,
Julien Scheibert
Abstract:
Sliding motion between two rough solids under light normal loading involves myriad micro-impacts between antagonist micro-asperities. Those micro-impacts are at the origin of many emerging macroscopic phenomena, including the friction force, the slider's vibrations and the noise radiated in the surroundings. However, the individual properties of the micro-impacts (e.g. maximum force, position alon…
▽ More
Sliding motion between two rough solids under light normal loading involves myriad micro-impacts between antagonist micro-asperities. Those micro-impacts are at the origin of many emerging macroscopic phenomena, including the friction force, the slider's vibrations and the noise radiated in the surroundings. However, the individual properties of the micro-impacts (e.g. maximum force, position along the interface, duration) are essentially elusive to measurement. Here, we introduce an instrumented slider aimed at measuring the position and the normal component of the micro-impact forces during sliding against a rough track. It is based on an array of piezoelectric sensors, each placed under a single model asperity. Its dynamical characteristics are established experimentally and compared to a finite elements model. We then validate its measurement capabilities by using it against a track bearing simple, well-defined topographical features. The measurements are interpreted thanks to a simple multi-asperity contact model. Our slider is expected to be useful in future studies to provide local insights into a variety of tribological questions involving dry rough sliding interfaces.
△ Less
Submitted 8 January, 2021; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Exploring metamaterials' structures through the relaxed micromorphic model: switching an acoustic screen into an acoustic absorber
Authors:
Gianluca Rizzi,
Manuel Collet,
Félix Demore,
Bernhard Eidel,
Patrizio Neff,
Angela Madeo
Abstract:
While the design of always new metamaterials with exotic static and dynamic properties is attracting deep attention in the last decades, little effort is made to explore their interactions with other materials. This prevents the conception of (meta-)structures that can enhance metamaterials' unorthodox behaviours and that can be employed in real engineering applications. In this paper, we give a f…
▽ More
While the design of always new metamaterials with exotic static and dynamic properties is attracting deep attention in the last decades, little effort is made to explore their interactions with other materials. This prevents the conception of (meta-)structures that can enhance metamaterials' unorthodox behaviours and that can be employed in real engineering applications. In this paper, we give a first answer to this challenging problem by showing that the relaxed micromorphic model with zero static characteristic length can be usefully applied to describe the refractive properties of simple meta-structures for extended frequency ranges and for any direction of propagation of the incident wave. Thanks to the simplified model's structure, we are able to efficiently explore different configurations and to show that a given meta-structure can drastically change its overall refractive behaviour when varying the elastic properties of specific meta-structural elements. In some cases, changing the stiffness of a homogeneous material which is in contact with a metamaterial's slab, reverses the structure's refractive behaviour by switching it from an acoustic screen (total reflection) into an acoustic absorber (total transmission). The present paper clearly indicates that, while the study and enhancement of the intrinsic metamaterials' properties is certainly of great importance, it is even more challenging to enable the conception of meta-structures that can eventually boost the use of metamaterials in real-case applications.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Experimental Realization of a Reconfigurable Electroacoustic Topological Insulator
Authors:
Amir Darabi,
Manuel Collet,
Michael J Leamy
Abstract:
A substantial challenge in guiding elastic waves is the presence of reflection and scattering at sharp edges, defects, and disorders. Recently, mechanical topological insulators have sought to overcome this challenge by supporting back-scattering resistant wave transmission. In this Letter, we propose and experimentally demonstrate the first \emph{reconfigurable electroacoustic} topological insula…
▽ More
A substantial challenge in guiding elastic waves is the presence of reflection and scattering at sharp edges, defects, and disorders. Recently, mechanical topological insulators have sought to overcome this challenge by supporting back-scattering resistant wave transmission. In this Letter, we propose and experimentally demonstrate the first \emph{reconfigurable electroacoustic} topological insulator exhibiting an analog to the quantum valley Hall effect (QVHE). Using programmable switches, this phononic structure allows for rapid reconfiguration of domain walls and thus the ability to control back-scattering resistant wave propagation along dynamic interfaces for phonons lying in static and finite-frequency regimes. Accordingly, a graphene-like Polyactic Acid (PLA) layer serves as the host medium, equipped with periodically arranged and bonded piezoelectric patches, resulting in two Dirac cones at the $K-$points. The PZT patches are then connected to negative capacitance external circuits to break inversion symmetry and create nontrivial topologically-protected bandgaps. As such, topologically protected interface waves are demonstrated numerically and validated experimentally for different predefined trajectories over a broad frequency range.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Numerical optimization of a prestressed auxetic metamaterial for vibration isolation
Authors:
Adrien Pyskir,
Manuel Collet,
Zoran Dimitrijevic,
Claude-Henri Lamarque
Abstract:
We present a numerical study on an enhanced periodic auxetic metamaterial. Rotating squares mechanism allied to precompression induced buckling give these elastic structures exotic properties. The static properties of the reference structure and the enhanced ones are first compared. After numerical analysis to ascertain the differences between several band calculation methods, we demonstrate the e…
▽ More
We present a numerical study on an enhanced periodic auxetic metamaterial. Rotating squares mechanism allied to precompression induced buckling give these elastic structures exotic properties. The static properties of the reference structure and the enhanced ones are first compared. After numerical analysis to ascertain the differences between several band calculation methods, we demonstrate the effect of precompression issued stress field on the dispersion diagram of the metamaterial. An optimization study is then performed to assess the potential vibration isolation improvement obtained with the new design. As a result, the bandgaps widths and range are found to be greatly increased by the geometric modifications proposed.
△ Less
Submitted 15 July, 2019;
originally announced July 2019.
-
Broadband nonreciprocal acoustic propagation using programmable boundary conditions: from analytical modelling to experimental implementation
Authors:
Sami Karkar,
Emanuele De Bono,
Manuel Collet,
Gaël Matten,
Morvan Ouisse,
Etienne Rivet
Abstract:
In this paper, we theoretically, numerically and experimentally demonstrate the acoustic isolator effect in a 1D waveguide with direction dependent controlled boundary conditions. A theoretical model is used to explain the principle of non reciprocal propagation in boundary controlled waveguides. Numerical simulations are carried out on a reduced model to show the non-reciprocity as well as the pa…
▽ More
In this paper, we theoretically, numerically and experimentally demonstrate the acoustic isolator effect in a 1D waveguide with direction dependent controlled boundary conditions. A theoretical model is used to explain the principle of non reciprocal propagation in boundary controlled waveguides. Numerical simulations are carried out on a reduced model to show the non-reciprocity as well as the passivity of the system, through the computation of the scattering matrix and the power delivered by the system. Finally, an experimental implementation validate the potential of programmable boundary conditions for non reciprocal propagation.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
Broadband acoustic isolator in the audible range : nonreciprocal acoustic propagation using programmable boundary conditions
Authors:
Sami Karkar,
Etienne Rivet,
Manuel Collet
Abstract:
We propose a novel concept of nonreciprocal devices in acoustics, illustrated by the design of an acoustic diode, or isolator. A boundary control strategy was previously shown to provide direction-dependent propagation properties in acoustic waveguides. In this paper, the boundary control is reinterpreted as a source term for the inhomogeneous wave equation, in a purely 1D model. Nonreciprocity is…
▽ More
We propose a novel concept of nonreciprocal devices in acoustics, illustrated by the design of an acoustic diode, or isolator. A boundary control strategy was previously shown to provide direction-dependent propagation properties in acoustic waveguides. In this paper, the boundary control is reinterpreted as a source term for the inhomogeneous wave equation, in a purely 1D model. Nonreciprocity is then obtained using a distributed source that replaces the non-standard boundary condition where the normal velocity at the boundary is a function of both pressure and its tangential derivative. Numerical simulations are carried out to validate the theoretical model, and the scattering matrix of the device is retrieved to investigate the nonreciprocal nature of the system. Results show that the proposed device can lead to an efficient, ultra-broadband, sub-wavelength, acoustic isolator. Finally, the effects of actual, finite-sized transducers on the performance of the acoustic isolator are discussed.
△ Less
Submitted 15 December, 2017; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Modeling real phononic crystals via the weighted relaxed micromorphic model with free and gradient micro-inertia
Authors:
Angela Madeo,
Manuel Collet,
Marco Miniaci,
Kévin Billon,
Morvan Ouisse,
Patrizio Neff
Abstract:
In this paper the relaxed micromorphic continuum model with weighted free and gradient micro-inertia is used to describe the dynamical behavior of a real two-dimensional phononic crystal for a wide range of wavelengths. In particular, a periodic structure with specific micro-structural topology and mechanical properties, capable of opening a phononic band-gap, is chosen with the criterion of showi…
▽ More
In this paper the relaxed micromorphic continuum model with weighted free and gradient micro-inertia is used to describe the dynamical behavior of a real two-dimensional phononic crystal for a wide range of wavelengths. In particular, a periodic structure with specific micro-structural topology and mechanical properties, capable of opening a phononic band-gap, is chosen with the criterion of showing a low degree of anisotropy (the band-gap is almost independent of the direction of propagation of the traveling wave). A Bloch wave analysis is performed to obtain the dispersion curves and the corresponding vibrational modes of the periodic structure. A linear-elastic, isotropic, relaxed micromorphic model including both a free micro-inertia (related to free vibrations of the microstructures) and a gradient micro-inertia (related to the motions of the microstructure which are coupled to the macro-deformation of the unit cell) is introduced and particularized to the case of plane wave propagation. The parameters of the relaxed model, which are independent of frequency, are then calibrated on the dispersion curves of the phononic crystal showing an excellent agreement in terms of both dispersion curves and vibrational modes. Almost all the homogenized elastic parameters of the relaxed micromorphic model result to be determined. This opens the way to the design of morphologically complex meta-structures which make use of the chosen phononic structure as the basic building block and which preserve its ability of "stopping" elastic wave propagation at the scale of the structure.
△ Less
Submitted 11 October, 2016;
originally announced October 2016.
