-
Atoms in hollow-core fibers: A QED approach
Authors:
Thomas W. Clark,
Luca Vincetti,
Peter Domokos
Abstract:
We outline mechanical effects of light-matter interaction inside hollow-core optical fibers. Starting with quantized electromagnetic radiation, we demonstrate how dispersion, mode functions and losses define an open quantum system and how subsequent Langevin equations can be used to predict spatially-dependent vacuum forces. Conceptually, we reveal new, geometry-induced, forces that have no equiva…
▽ More
We outline mechanical effects of light-matter interaction inside hollow-core optical fibers. Starting with quantized electromagnetic radiation, we demonstrate how dispersion, mode functions and losses define an open quantum system and how subsequent Langevin equations can be used to predict spatially-dependent vacuum forces. Conceptually, we reveal new, geometry-induced, forces that have no equivalence in unbounded 3-D space and, practically, show how the general spatial dependence can be greatly approximated by free-space Ince-Gaussian modes: such that the forces can be described analytically. By also considering the effects of drive and fluctuations, we provide an extensive overview of both control and cooling within the limitations of a 2-level atomic system.
△ Less
Submitted 25 April, 2025;
originally announced April 2025.
-
Detuning-symmetric laser cooling of many mechanical modes with a photothermally modified cavity
Authors:
Thomas J. Clark,
Jiaxing Ma,
Jack C. Sankey
Abstract:
We simultaneously cool $\gtrsim$100 mechanical modes of a membrane with a photothermally modified optical cavity driven by a single blue-detuned laser. In contrast to radiation pressure and bolometric forces applied directly to the mechanical system, this cooling effect does not depend on the sign of detuning, allowing for single-laser stabilization (i.e., simultaneous positive optical spring and…
▽ More
We simultaneously cool $\gtrsim$100 mechanical modes of a membrane with a photothermally modified optical cavity driven by a single blue-detuned laser. In contrast to radiation pressure and bolometric forces applied directly to the mechanical system, this cooling effect does not depend on the sign of detuning, allowing for single-laser stabilization (i.e., simultaneous positive optical spring and damping) that is especially effective at room temperature and high laser power. We also provide intuition about the competing thermal processes, and propose two simple modifications to the mirror coatings that can strongly enhance this effect.
△ Less
Submitted 13 May, 2025; v1 submitted 11 March, 2025;
originally announced March 2025.
-
Demonstration of strong coupling of a subradiant atom array to a cavity vacuum
Authors:
Bence Gábor,
K. V. Adwaith,
Dániel Varga,
Bálint Sárközi,
András Dombi,
T. W. Clark,
F. I. B. Williams,
David Nagy,
András Vukics,
Peter Domokos
Abstract:
By considering linear scattering of cold atoms inside an undriven high-finesse optical resonator, we experimentally demonstrate effects unique to a strongly coupled vacuum field. Arranging the atoms in an incommensurate lattice, with respect to the resonator mode, the scattering can be suppressed by destructive interference: resulting in a subradiant atomic array. We show however, that strong coup…
▽ More
By considering linear scattering of cold atoms inside an undriven high-finesse optical resonator, we experimentally demonstrate effects unique to a strongly coupled vacuum field. Arranging the atoms in an incommensurate lattice, with respect to the resonator mode, the scattering can be suppressed by destructive interference: resulting in a subradiant atomic array. We show however, that strong coupling leads to a drastic modification of the excitation spectrum, as evidenced by well-resolved vacuum Rabi splitting in the intensity of the fluctuations. Furthermore, we demonstrate a significant polarization rotation in the linear scattering off the subradiant array via Raman scattering induced by the strongly coupled vacuum field.
△ Less
Submitted 1 October, 2024; v1 submitted 30 August, 2024;
originally announced August 2024.
-
An optically defined phononic crystal defect
Authors:
Thomas J. Clark,
Simon Bernard,
Jiaxing Ma,
Vincent Dumont,
Jack C. Sankey
Abstract:
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanica…
▽ More
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanical frequency shift commensurate with a 37-fold reduction in the mode's participating mass. Our results lay groundwork for a new class of optomechanical systems that control mechanical mode profile and participating mass.
△ Less
Submitted 28 June, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
From Compact Plasma Particle Sources to Advanced Accelerators with Modeling at Exascale
Authors:
Axel Huebl,
Remi Lehe,
Edoardo Zoni,
Olga Shapoval,
Ryan T. Sandberg,
Marco Garten,
Arianna Formenti,
Revathi Jambunathan,
Prabhat Kumar,
Kevin Gott,
Andrew Myers,
Weiqun Zhang,
Ann Almgren,
Chad E. Mitchell,
Ji Qiang,
David Grote,
Alexander Sinn,
Severin Diederichs,
Maxence Thevenet,
Luca Fedeli,
Thomas Clark,
Neil Zaim,
Henri Vincenti,
Jean-Luc Vay
Abstract:
Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using…
▽ More
Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using the US DOE Exascale Computing Project WarpX. Leveraging developments for Exascale, the new DOE SCIDAC-5 Consortium for Advanced Modeling of Particle Accelerators (CAMPA) will advance numerical algorithms and accelerate community modeling codes in a cohesive manner: from beam source, over energy boost, transport, injection, storage, to application or interaction. Such start-to-end modeling will enable the exploration of hybrid accelerators, with conventional and advanced elements, as the next step for advanced accelerator modeling. Following open community standards, we seed an open ecosystem of codes that can be readily combined with each other and machine learning frameworks. These will cover ultrafast to ultraprecise modeling for future hybrid accelerator design, even enabling virtual test stands and twins of accelerators that can be used in operations.
△ Less
Submitted 18 April, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Visualization of magnetic fields with cylindrical vector beams in a warm atomic vapor
Authors:
Shuwei Qiu,
Jinwen Wang,
Francesco Castellucci,
Mingtao Cao,
Shougang Zhang,
Thomas W. Clark,
Sonja Franke-Arnold,
Hong Gao,
Fuli Li
Abstract:
We propose and demonstrate an experimental implementation for the observation of magnetic fields from spatial features of absorption profiles in a warm atomic vapor. A radially polarized vector beam that traverses an atomic vapor will generate an absorption pattern with petal-like structure by the mediation of a transverse magnetic field (TMF). The spatial absorption pattern rotates when the azimu…
▽ More
We propose and demonstrate an experimental implementation for the observation of magnetic fields from spatial features of absorption profiles in a warm atomic vapor. A radially polarized vector beam that traverses an atomic vapor will generate an absorption pattern with petal-like structure by the mediation of a transverse magnetic field (TMF). The spatial absorption pattern rotates when the azimuthal angle of the TMF is changed, while its contrast decreases when the longitudinal component of the magnetic field increases. By analyzing the intensity distribution of the transmitted pattern we can determine the magnetic field strength. Our work provides a framework for investigating three-dimensional magnetic field distributions based on atoms.
△ Less
Submitted 2 October, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
An atomic compass -- detecting 3D magnetic field alignment with vector vortex light
Authors:
Francesco Castellucci,
Thomas W. Clark,
Adam Selyem,
Jinwen Wang,
Sonja Franke-Arnold
Abstract:
We describe and demonstrate how 3D magnetic field alignment can be inferred from single absorption images of an atomic cloud. While optically pumped magnetometers conventionally rely on temporal measurement of the Larmor precession of atomic dipoles, here a cold atomic vapour provides a spatial interface between vector light and external magnetic fields. Using a vector vortex beam, we inscribe str…
▽ More
We describe and demonstrate how 3D magnetic field alignment can be inferred from single absorption images of an atomic cloud. While optically pumped magnetometers conventionally rely on temporal measurement of the Larmor precession of atomic dipoles, here a cold atomic vapour provides a spatial interface between vector light and external magnetic fields. Using a vector vortex beam, we inscribe structured atomic spin polarisation in a cloud of cold rubidium atoms, and record images of the resulting absorption patterns. The polar angle of an external magnetic field can be deduced with spatial Fourier analysis. This effect presents an alternative concept for detecting magnetic vector fields, and demonstrates, more generally, how introducing spatial phases between atomic energy levels can translate transient effects to the spatial domain.
△ Less
Submitted 22 July, 2021; v1 submitted 24 June, 2021;
originally announced June 2021.
-
Two-point evolution equations for incompressible variable density turbulence
Authors:
Timothy T. Clark
Abstract:
A derivation of the "exact" two-point equations analogous to those used as a basis for one-point Reynolds-Averaged Navier-Stokes turbulence model for variable density, incompressible turbulence. The purpose is to present the statistical correlations that must be dealt with to yield a two-point, or alternatively, a spectral model of variable density turbulence.
A derivation of the "exact" two-point equations analogous to those used as a basis for one-point Reynolds-Averaged Navier-Stokes turbulence model for variable density, incompressible turbulence. The purpose is to present the statistical correlations that must be dealt with to yield a two-point, or alternatively, a spectral model of variable density turbulence.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Monitored wet-etch removal of individual dielectric layers from high-finesse Bragg mirrors
Authors:
Simon Bernard,
Thomas J. Clark,
Vincent Dumont,
Jiaxing Ma,
Jack C. Sankey
Abstract:
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this cas…
▽ More
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this case from a high-reflectivity fiber mirror. By immersing in acid and monitoring off-band reflected light, we show it is straightforward to iteratively (or continuously) remove six bilayers. At each stage, we characterize the coating performance with a Fabry-Pérot cavity, observing the expected stepwise decrease in finesse from 92,000$\pm$3,000 to 3,950$\pm$50, finding no evidence of added optical losses. The etch also removes the fiber's sidewall coating after a single bilayer, and, after six bilayers, confines the remaining coating to a $\sim$50-$μ$m-diameter pedestal at the center of the fiber tip. Vapor etching above the solution produces a tapered "pool cue" cladding profile, reducing the fiber diameter (nominally 125 $μ$m) to $\sim$100 $μ$m at an angle of $\sim$0.3$^\circ$ near the tip. Finally, we note that the data generated by this technique provides a sensitive estimate of the layers' optical depths. This technique could be readily adapted to free-space optics and other coatings.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Wavelength transduction from a 3D microwave cavity to telecom using piezoelectric optomechanical crystals
Authors:
H. Ramp,
T. J. Clark,
B. D. Hauer,
C. Doolin,
K. C. Balram,
K. Srinivasan,
J. P. Davis
Abstract:
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical cry…
▽ More
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical crystal, which has been placed in the microwave electric field maximum. This allows the microwave cavity to actuate the gigahertz-frequency mechanical breathing mode in the optomechanical crystal through the piezoelectric effect, which is then read out using a telecom optical mode. The gallium arsenide optomechanical crystal is a good candidate for low-noise microwave-to-telecom transduction, as it has been previously cooled to the mechanical ground state in a dilution refrigerator. Moreover, the 3D microwave cavity architecture can naturally be extended to couple to superconducting qubits and to create hybrid quantum systems.
△ Less
Submitted 25 April, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Dalton's and Amagat's laws fail in gas mixtures with shock propagation
Authors:
Patrick Wayne,
Sean Cooper,
Dylan Simons,
Ignacio Trueba-Monje,
Daniel Freelong,
Gregory Vigil,
Peter Vorobieff,
C. Randall Truman,
Vladimir Vorob'ev,
Timothy Clark
Abstract:
As a shock wave propagates through a gas mixture, pressure, temperature, and density increase across the shock front. Rankine-Hugoniot (R-H) relations quantify these changes, correlating post-shock quantities with upstream conditions (pre-shock) and incident shock Mach number [1-5]. These equations describe a calorically perfect gas, but deliver a good approximation for real gases, provided the up…
▽ More
As a shock wave propagates through a gas mixture, pressure, temperature, and density increase across the shock front. Rankine-Hugoniot (R-H) relations quantify these changes, correlating post-shock quantities with upstream conditions (pre-shock) and incident shock Mach number [1-5]. These equations describe a calorically perfect gas, but deliver a good approximation for real gases, provided the upstream conditions are well-characterized with a thermodynamic mixing model. Two classic thermodynamic models of gas mixtures are Dalton's law of partial pressures and Amagat's law of partial volumes [6]. Here we show that neither thermodynamic model can accurately predict the post-shock quantities of interest (temperature and pressure), on time scales much longer than those associated with the shock front passage, due to their implicit assumptions about behavior on the molecular level, including mixing reversibility. We found that in non-reacting binary mixtures of sulfur hexafluoride (SF6) and helium (He), kinetic molecular theory (KMT) can be used to quantify the discrepancies found between theoretical and experimental values for post-shock pressure and temperature. Our results demonstrate the complexity of analyzing shock wave interaction with two highly disparate gases, while also providing starting points for future theoretical and experimental work and validation of numerical simulations.
△ Less
Submitted 5 July, 2019; v1 submitted 14 February, 2019;
originally announced February 2019.
-
Dueling Dynamical Backaction in a Cryogenic Optomechanical Cavity
Authors:
B. D. Hauer,
T. J. Clark,
P. H. Kim,
C. Doolin,
J. P. Davis
Abstract:
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optome…
▽ More
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optomechanical spring effect and the latter governing the optomechanical damping. At high enough optical input powers, we show that the photothermal force drives the mechanical resonator into self-oscillations for a pump beam detuned to the lower-frequency side of the optical resonance, contrary to what one would expect for a radiation-pressure-dominated optomechanical device. Using a fully nonlinear model, we fit the hysteretic response of the optomechanical cavity to extract its properties, demonstrating that this non-sideband-resolved device exists in a regime where photothermal damping could be used to cool its motion to the quantum ground state.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
Elimination of Thermomechanical Noise in Piezoelectric Optomechanical Crystals
Authors:
H. Ramp,
B. D. Hauer,
K. C. Balram,
T. J. Clark,
K. Srinivasan,
J. P. Davis
Abstract:
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eli…
▽ More
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only $0.7\pm0.4 ~ \mathrm{phonons}$, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.
△ Less
Submitted 15 June, 2019; v1 submitted 21 December, 2018;
originally announced December 2018.
-
Cryogenic Microwave Filter Cavity with a Tunability Greater than 5 GHz
Authors:
T. J. Clark,
V. Vadakkumbatt,
F. Souris,
H. Ramp,
J. P Davis
Abstract:
A wide variety of applications of microwave cavities, such as measurement and control of superconducting qubits, magnonic resonators, and phase noise filters, would be well served by having a highly tunable microwave resonance. Often this tunability is desired in situ at low temperatures, where one can take advantage of superconducting cavities. To date, such cryogenic tuning while maintaining a h…
▽ More
A wide variety of applications of microwave cavities, such as measurement and control of superconducting qubits, magnonic resonators, and phase noise filters, would be well served by having a highly tunable microwave resonance. Often this tunability is desired in situ at low temperatures, where one can take advantage of superconducting cavities. To date, such cryogenic tuning while maintaining a high quality factor has been limited to $\sim500$ MHz. Here we demonstrate a three-dimensional superconducting microwave cavity that shares one wall with a pressurized volume of helium. Upon pressurization of the helium chamber the microwave cavity is deformed, which results in in situ tuning of its resonant frequency by more than 5 GHz, greater than 60% of the original 8 GHz resonant frequency. The quality factor of the cavity remains approximately constant at $\approx7\times 10^{3}$ over the entire range of tuning. As a demonstration of its usefulness, we implement a tunable cryogenic phase noise filter, which reduces the phase noise of our source by approximately 10 dB above 400 kHz.
△ Less
Submitted 4 October, 2018;
originally announced October 2018.
-
Two-point spectral model for variable-density homogeneous turbulence
Authors:
Nairita Pal,
Susan Kurien,
Timothy Clark,
Denis Aslangil,
Daniel Livescu
Abstract:
We present a study of buoyancy-driven variable-density homogeneous turbulence, using a two-point spectral closure model. We compute the time-evolution of the spectral distribution in wavenumber $k$ of the correlation of density and specific-volume $b(k)$, the mass flux $\bm{a}(k)$, and the turbulent kinetic energy $E(k)$, using a set of coupled equations. Under the modeling assumptions, each dynam…
▽ More
We present a study of buoyancy-driven variable-density homogeneous turbulence, using a two-point spectral closure model. We compute the time-evolution of the spectral distribution in wavenumber $k$ of the correlation of density and specific-volume $b(k)$, the mass flux $\bm{a}(k)$, and the turbulent kinetic energy $E(k)$, using a set of coupled equations. Under the modeling assumptions, each dynamical variable has two coefficients governing spectral transfer among modes. In addition, the mass flux $\bm{a}(k)$ has two coefficients governing the drag between the two fluids. Using a prescribed initial condition for $b(k)$ and starting from a quiescent flow, we first evaluate the relative importance of the different coefficients used to model this system, and their impact on the statistical quantities. We next assess the accuracy of the model, relative to Direct Numerical simulation of the complete hydrodynamical equations, using $b$, ${\bm a}$ and $E$ as metrics. We show that the model is able to capture the spectral distribution and global means of all three statistical quantities at both low and high Atwood number for a set of optimized coefficients. The optimization procedure also permits us to discern a minimal set of four coefficients which are sufficient to yield reasonable results while pointing to the mechanisms that dominate the mixing process in this problem.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Holographically controlled three-dimensional atomic population patterns
Authors:
Adam Selyem,
Sylvain Fayard,
Thomas W. Clark,
Aidan S. Arnold,
Neal Radwell,
Sonja Franke-Arnold
Abstract:
The interaction of spatially structured light fields with atomic media can generate spatial structures inscribed in the atomic populations and coherences, allowing for example the storage of optical images in atomic vapours. Typically, this involves coherent optical processes based on Raman or EIT transitions. Here we study the simpler situation of shaping atomic populations via spatially dependen…
▽ More
The interaction of spatially structured light fields with atomic media can generate spatial structures inscribed in the atomic populations and coherences, allowing for example the storage of optical images in atomic vapours. Typically, this involves coherent optical processes based on Raman or EIT transitions. Here we study the simpler situation of shaping atomic populations via spatially dependent optical depletion. Using a near resonant laser beam with a holographically controlled 3D intensity profile, we imprint 3D population structures into a thermal rubidium vapour. This 3D population structure is simultaneously read out by recording the spatially resolved fluorescence of an unshaped probe laser. We find that the reconstructed atomic population structure is largely complementary to the intensity structure of the control beam, however appears blurred due to global repopulation processes. We identify and model these mechanisms which limit the achievable resolution of the 3D atomic population. We expect this work to set design criteria for future 2D and 3D atomic memories.
△ Less
Submitted 21 May, 2018;
originally announced May 2018.
-
Magnetic Actuation and Feedback Cooling of a Cavity Optomechanical Torque Sensor
Authors:
P. H. Kim,
B. D. Hauer,
T. J. Clark,
F. Fani Sani,
M. R. Freeman,
J. P. Davis
Abstract:
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermor…
▽ More
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermore, we are able to extract the magnetization (1710 kA/m) of the magnetic sample, not known a priori, demonstrating this system's potential for studies of nanomagnetism. Finally, we show that we can magnetically drive the torsional resonator into regenerative oscillations, and dampen its mechanical mode temperature from room temperature to 11.6 K, without sacrificing torque sensitivity.
△ Less
Submitted 29 July, 2017;
originally announced July 2017.
-
Spectral Model of Non-Stationary, Inhomogeneous Turbulence
Authors:
Andrew D. Bragg,
Susan Kurien,
Timothy T. Clark
Abstract:
We compare results from a spectral model for non-stationary, inhomogeneous turbulence (Besnard et al., Theor. Comp. Fluid. Dyn., vol. 8, pp 1-35, 1996) with Direct Numerical Simulation (DNS) data of a shear-free mixing layer (SFML) (Tordella et al., Phys. Rev. E, vol. 77, 016309, 2008). The SFML is used as a test case in which the efficacy of the model closure for the physical-space transport of t…
▽ More
We compare results from a spectral model for non-stationary, inhomogeneous turbulence (Besnard et al., Theor. Comp. Fluid. Dyn., vol. 8, pp 1-35, 1996) with Direct Numerical Simulation (DNS) data of a shear-free mixing layer (SFML) (Tordella et al., Phys. Rev. E, vol. 77, 016309, 2008). The SFML is used as a test case in which the efficacy of the model closure for the physical-space transport of the fluid velocity field can be tested in a flow with inhomogeneity, without the additional complexity of mean-flow coupling. The model is able to capture certain features of the SFML quite well for intermediate to long-times, including the evolution of the mixing-layer width and turbulent kinetic energy. At short-times, and for more sensitive statistics such as the generation of the velocity field anisotropy, the model is less accurate. We present arguments, supported by the DNS data, that a significant cause of the discrepancies is the local approximation to the intrinsically non-local pressure-transport in physical-space that was made in the model, the effects of which would be particularly strong at short-times when the inhomogeneity of the SFML is strongest.
△ Less
Submitted 18 November, 2015;
originally announced November 2015.
-
Spatially dependent electromagnetically induced transparency
Authors:
Neal Radwell,
Thomas W. Clark,
Bruno Piccirillo,
Stephen M. Barnett,
Sonja Franke-Arnold
Abstract:
Recent years have seen vast progress in the generation and detection of structured light, with potential applications in high capacity optical data storage and continuous variable quantum technologies. Here we measure the transmission of structured light through cold rubidium atoms and observe regions of electromagnetically induced transparency (EIT). We use q-plates to generate a probe beam with…
▽ More
Recent years have seen vast progress in the generation and detection of structured light, with potential applications in high capacity optical data storage and continuous variable quantum technologies. Here we measure the transmission of structured light through cold rubidium atoms and observe regions of electromagnetically induced transparency (EIT). We use q-plates to generate a probe beam with azimuthally varying phase and polarisation structure, and its right and left circular polarisation components provide the probe and control of an EIT transition. We observe an azimuthal modulation of the absorption profile that is dictated by the phase and polarisation structure of the probe laser. Conventional EIT systems do not exhibit phase sensitivity. We show, however, that a weak transverse magnetic field closes the EIT transitions, thereby generating phase dependent dark states which in turn lead to phase dependent transparency, in agreement with our measurements.
△ Less
Submitted 3 December, 2014;
originally announced December 2014.
-
Using the Twentieth Century Reanalysis to assess climate variability for the European wind industry
Authors:
Philip E. Bett,
Hazel E. Thornton,
Robin T. Clark
Abstract:
We characterise the long-term variability of European near-surface wind speeds using 142 years of data from the Twentieth Century Reanalysis (20CR), and consider the potential of such long-baseline climate data sets for wind energy applications. The low resolution of the 20CR would severely restrict its use on its own for wind farm site-screening. We therefore perform a simple statistical calibrat…
▽ More
We characterise the long-term variability of European near-surface wind speeds using 142 years of data from the Twentieth Century Reanalysis (20CR), and consider the potential of such long-baseline climate data sets for wind energy applications. The low resolution of the 20CR would severely restrict its use on its own for wind farm site-screening. We therefore perform a simple statistical calibration to link it to the higher-resolution ERA-Interim data set (ERAI), such that the adjusted 20CR data has the same wind speed distribution at each location as ERAI during their common period. Using this corrected 20CR data set, wind speeds and variability are characterised in terms of the long-term mean, standard deviation, and corresponding trends. Many regions of interest show extremely weak trends on century timescales, but contain large multidecadal variability. Since reanalyses such as ERAI are often used to provide the background climatology for wind farm site assessments, but contain only a few decades of data, our results can be used as a way of incorporating decadal-scale wind climate variability into such studies, allowing investment risks for wind farms to be reduced.
△ Less
Submitted 24 August, 2015; v1 submitted 18 September, 2014;
originally announced September 2014.
-
European wind variability over 140 yr
Authors:
Philip E. Bett,
Hazel E. Thornton,
Robin T. Clark
Abstract:
We present initial results of a study on the variability of wind speeds across Europe over the past 140 yr, making use of the recent Twentieth Century Reanalysis data set, which includes uncertainty estimates from an ensemble method of reanalysis. Maps of the means and standard deviations of daily wind speeds, and the Weibull-distribution parameters, show the expected features, such as the strong,…
▽ More
We present initial results of a study on the variability of wind speeds across Europe over the past 140 yr, making use of the recent Twentieth Century Reanalysis data set, which includes uncertainty estimates from an ensemble method of reanalysis. Maps of the means and standard deviations of daily wind speeds, and the Weibull-distribution parameters, show the expected features, such as the strong, highly-variable wind in the north-east Atlantic. We do not find any clear, strong long-term trends in wind speeds across Europe, and the variability between decades is large. We examine how different years and decades are related in the long-term context, by looking at the ranking of annual mean wind speeds. Picking a region covering eastern England as an example, our analyses show that the wind speeds there over the past ~ 20 yr are within the range expected from natural variability, but do not span the full range of variability of the 140-yr data set. The calendar-year 2010 is however found to have the lowest mean wind speed on record for this region.
△ Less
Submitted 3 April, 2013; v1 submitted 17 January, 2013;
originally announced January 2013.
-
The Stochastic Dynamics of Rectangular and V-shaped Atomic Force Microscope Cantilevers in a Viscous Fluid and Near a Solid Boundary
Authors:
M. T. Clark,
M. R. Paul
Abstract:
Using a thermodynamic approach based upon the fluctuation-dissipation theorem we quantify the stochastic dynamics of rectangular and V-shaped microscale cantilevers immersed in a viscous fluid. We show that the stochastic cantilever dynamics as measured by the displacement of the cantilever tip or by the angle of the cantilever tip are different. We trace this difference to contributions from th…
▽ More
Using a thermodynamic approach based upon the fluctuation-dissipation theorem we quantify the stochastic dynamics of rectangular and V-shaped microscale cantilevers immersed in a viscous fluid. We show that the stochastic cantilever dynamics as measured by the displacement of the cantilever tip or by the angle of the cantilever tip are different. We trace this difference to contributions from the higher modes of the cantilever. We find that contributions from the higher modes are significant in the dynamics of the cantilever tip-angle. For the V-shaped cantilever the resulting flow field is three-dimensional and complex in contrast to what is found for a long and slender rectangular cantilever. Despite this complexity the stochastic dynamics can be predicted using a two-dimensional model with an appropriately chosen length scale. We also quantify the increased fluid dissipation that results as a V-shaped cantilever is brought near a solid planar boundary.
△ Less
Submitted 15 January, 2008; v1 submitted 14 January, 2008;
originally announced January 2008.
