-
The FAZIA setup: a review on the electronics and the mechanical mounting
Authors:
S. Valdré,
G. Casini,
N. Le Neindre,
M. Bini,
A. Boiano,
B. Borderie,
P. Edelbruck,
G. Poggi,
F. Salomon,
G. Tortone,
R. Alba,
S. Barlini,
E. Bonnet,
R. Bougault,
A. Bougard,
G. Brulin,
M. Bruno,
A. Buccola,
A. Camaiani,
A. Chbihi,
C. Ciampi,
M. Cicerchia,
M. Cinausero,
D. Dell'Aquila,
P. Desrues
, et al. (56 additional authors not shown)
Abstract:
In this paper the technological aspects of the FAZIA array will be explored. After a productive commissioning phase, FAZIA blocks started to measure and give very useful data to explore the physics of Fermi energy heavy-ion reactions. This was possible thanks to many technical measures and innovations developed in the commissioning phase and tuned during the first experimental campaigns. This pape…
▽ More
In this paper the technological aspects of the FAZIA array will be explored. After a productive commissioning phase, FAZIA blocks started to measure and give very useful data to explore the physics of Fermi energy heavy-ion reactions. This was possible thanks to many technical measures and innovations developed in the commissioning phase and tuned during the first experimental campaigns. This paper gives a detailed description of the present status of the FAZIA setup from the electronic and mechanical point of view, trying also to trace a path for new improvements and refinements of the apparatus.
△ Less
Submitted 5 April, 2019; v1 submitted 24 September, 2018;
originally announced September 2018.
-
Siloxane-based 6LiF composites for flexible thermal neutron scintillation sensors with high efficiency: effects of 6LiF crystals size and dispersion homogeneity
Authors:
S. M. Carturan,
M. Vesco,
I. Bonesso,
A. Quaranta,
G. Maggioni,
L. Stevanato,
E. Zanazzi,
T. Marchi,
D. Fabris,
M. Cinausero,
F. Gramegna
Abstract:
The production of flexible and robust thermal neutron detectors with improved properties as compared to the commercial ZnS:Ag based phosphors is here pursued, exploiting a siloxane binder, whose intrinsic properties as related to the chemical features of the functional groups and to the optical properties are investigated and tailored in correlation with the final performances of the detectors. Tw…
▽ More
The production of flexible and robust thermal neutron detectors with improved properties as compared to the commercial ZnS:Ag based phosphors is here pursued, exploiting a siloxane binder, whose intrinsic properties as related to the chemical features of the functional groups and to the optical properties are investigated and tailored in correlation with the final performances of the detectors. Two different siloxanes either with pendant phenyl groups or with aliphatic groups have been used, the former being intrinsically fluorescent and with higher polarizability than the latter. Moreover, 6LiF crystals have been synthesized by co-precipitation method and the solvent/co-solvent ratio has been changed in order to tune the crystal size. Then, the size effect on the detector efficiency to thermal neutrons has been investigated as related to the energy loss of thermal neutron reaction products inside the crystal and the dispersion homogeneity of the crystals into the composite. To complete the characterization of the produced flexible detectors, the response to γ-rays has been measured and compared to a commercial detector. The careful choice of both the base resin and the 6LiF crystals size allows to produce flexible detector for thermal neutrons with performances comparable to the commercial standard and with higher mechanical robustness and stability.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
Energy measurement and fragment identification using digital signals from partially depleted Si detectors
Authors:
G. Pasquali,
G. Pastore,
N. Le Neindre,
G. Ademard,
S. Barlini,
M. Bini,
E. Bonnet,
B. Borderie,
R. Bougault,
M. Bruno,
G. Casini,
A. Chbihi,
M. Cinausero,
J. A. Duenas,
P. Edelbruck,
J. D. Frankland,
F. Gramegna,
D. Gruyer,
A. Kordyasz,
T. Kozik,
O. Lopez,
T. Marchi,
L. Morelli,
A. Olmi,
A. Ordine
, et al. (14 additional authors not shown)
Abstract:
A study of identification properties of a Si-Si DE-E telescope exploiting an underdepleted residual-energy detector has been performed. Five different bias voltages have been used, one corresponding to full depletion, the others associated with a depleted layer ranging from 90% to 60% of the detector thickness. Fragment identification has been performed using either the DE-E technique or Pulse Sha…
▽ More
A study of identification properties of a Si-Si DE-E telescope exploiting an underdepleted residual-energy detector has been performed. Five different bias voltages have been used, one corresponding to full depletion, the others associated with a depleted layer ranging from 90% to 60% of the detector thickness. Fragment identification has been performed using either the DE-E technique or Pulse Shape Analysis (PSA). Both detectors are reverse mounted: particles enter from the low field side, to enhance the PSA performance. The achieved charge and mass resolution has been quantitatively expressed using a Figure of Merit (FoM). Charge collection efficiency has been evaluated and the possibility of energy calibration corrections has been considered. We find that the DE-E performance is not affected by incomplete depletion even when only 60% of the wafer is depleted. Isotopic separation capability improves at lower bias voltages with respect to full depletion, though charge identification thresholds are higher than at full depletion. Good isotopic identification via PSA has been obtained from a partially depleted detector whose doping uniformity is not good enough for isotopic identification at full depletion.
△ Less
Submitted 20 February, 2014;
originally announced February 2014.
-
Novel Scintillating Materials Based on Phenyl-Polysiloxane for Neutron Detection and Monitoring
Authors:
M. Degerlier,
S. Carturan,
F. Gramegna,
T. Marchi,
M. Dalla Palma,
M. Cinausero,
G. Maggioni,
A. Quaranta,
G. Collazuol,
J. Bermudez
Abstract:
Neutron detectors are extensively used at many nuclear research facilities across Europe. Their application range covers many topics in basic and applied nuclear research: in nuclear structure and reaction dynamics (reaction reconstruction and decay studies); in nuclear astrophysics (neutron emission probabilities); in nuclear technology (nuclear data measurements and in-core/off-core monitors); i…
▽ More
Neutron detectors are extensively used at many nuclear research facilities across Europe. Their application range covers many topics in basic and applied nuclear research: in nuclear structure and reaction dynamics (reaction reconstruction and decay studies); in nuclear astrophysics (neutron emission probabilities); in nuclear technology (nuclear data measurements and in-core/off-core monitors); in nuclear medicine (radiation monitors, dosimeters); in materials science (neutron imaging techniques); in homeland security applications (fissile materials investigation and cargo inspection). Liquid scintillators, widely used at present, have however some drawbacks given by toxicity, flammability, volatility and sensitivity to oxygen that limit their duration and quality. Even plastic scintillators are not satisfactory because they have low radiation hardness and low thermal stability. Moreover organic solvents may affect their optical properties due to crazing. In order to overcome these problems, phenyl-polysiloxane based scintillators have been recently developed at Legnaro National Laboratory. This new solution showed very good chemical and thermal stability and high radiation hardness. The results on the different samples performance will be presented, paying special attention to a characterization comparison between synthesized phenyl containing polysiloxane resins where a Pt catalyst has been used and a scintillating material obtained by condensation reaction, where tin based compounds are used as catalysts. Different structural arrangements as a result of different substituents on the main chain have been investigated by High Resolution X-Ray Diffraction, while the effect of improved optical transmittance on the scintillation yield has been elucidated by a combination of excitation/fluorescence measurements and scintillation yield under exposure to alpha and γ-rays.
△ Less
Submitted 25 October, 2013;
originally announced October 2013.
-
GARFIELD + RCo Digital Upgrade: a Modern Set-up for Mass and Charge Identification of Heavy Ion Reaction Products
Authors:
M. Bruno,
F. Gramegna,
T. Marchi,
L. Morelli,
G. Pasquali,
G. Casini,
U. Abbondanno,
G. Baiocco,
L. Bardelli,
S. Barlini,
M. Bini,
S. Carboni,
M. Cinausero,
M. D Agostino,
M. Degerlier,
V. L. Kravchuk,
E. Geraci,
P. F. Mastinu,
A. Ordine,
S. Piantelli,
G. Poggi,
A. Moroni
Abstract:
An upgraded GARFIELD + Ring Counter (RCo) apparatus is presented with improved performances as far as electronics and detectors are concerned. On one side fast sampling digital read out has been extended to all detectors, allowing for an important simplification of the signal processing chain together with an enriched extracted information. On the other side a relevant improvement has been made in…
▽ More
An upgraded GARFIELD + Ring Counter (RCo) apparatus is presented with improved performances as far as electronics and detectors are concerned. On one side fast sampling digital read out has been extended to all detectors, allowing for an important simplification of the signal processing chain together with an enriched extracted information. On the other side a relevant improvement has been made in the forward part of the setup (RCo): an increased granularity of the CsI(Tl) crystals and a higher homogeneity in the silicon detector resistivity. The renewed performances of the GARFIELD + RCo array make it suitable for nuclear reaction measurements both with stable and with Radioactive Ion Beams (RIB), like the ones foreseen for the SPES facility, where the Physics of Isospin can be studied.
△ Less
Submitted 21 September, 2013;
originally announced September 2013.
-
The european FAZIA initiative: a high-performance digital telescope array for heavy-ion studies
Authors:
G. Casini,
S. Barlini,
G. Pasquali,
G. Pastore,
M. Bini,
S. Carboni,
A. Olmi,
S. Piantelli,
G. Poggi,
A. Stefanini,
S. Valdre',
E. Bonnet,
B. Borderie,
R. Bougault,
M. Bruno,
A. Chbihi,
M. Cinausero,
M. Degerlier,
P. Edelbruck,
J. D. Frankland,
F. Gramegna,
D. Gruyer,
M. Guerzoni,
A. Kordjasz,
T. Kozik
, et al. (14 additional authors not shown)
Abstract:
The european Fazia collaboration aims at building a new modular array for charged product identification to be employed for heavy-ion studies. The elementary module of the array is a Silicon-Silicon-CsI telescope, optimized for ion identification also via pulse shape analysis. The achievement of top performances imposes specific electronics which has been developed by FAZIA and features high quali…
▽ More
The european Fazia collaboration aims at building a new modular array for charged product identification to be employed for heavy-ion studies. The elementary module of the array is a Silicon-Silicon-CsI telescope, optimized for ion identification also via pulse shape analysis. The achievement of top performances imposes specific electronics which has been developed by FAZIA and features high quality charge and current preamplifiers, coupled to fully digital front-end. During the initial R&D phase, original and novel solutions have been tested in prototypes, obtaining unprecedented ion identification capabilities. FAZIA is now constructing a demonstrator array consisting of about two hundreds telescopes arranged in a compact and transportable configuration. In this contribution, we mainly summarize some aspects studied by FAZIA to improve the ion identification. Then we will briefly discuss the FAZIA program centered on experiments to be done with the demonstrator. First results on the isospin dynamics obtained with a reduced set-up demonstrate well the performance of the telescope and represent a good starting point towards future investigations with both stable and exotic beams.
△ Less
Submitted 5 September, 2013;
originally announced September 2013.
-
The EUROnu Project
Authors:
T. R. Edgecock,
O. Caretta,
T. Davenne,
C. Densham,
M. Fitton,
D. Kelliher,
P. Loveridge,
S. Machida,
C. Prior,
C. Rogers,
M. Rooney,
J. Thomason,
D. Wilcox,
E. Wildner,
I. Efthymiopoulos,
R. Garoby,
S. Gilardoni,
C. Hansen,
E. Benedetto,
E. Jensen,
A. Kosmicki,
M. Martini,
J. Osborne,
G. Prior,
T. Stora
, et al. (146 additional authors not shown)
Abstract:
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the…
▽ More
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive.
△ Less
Submitted 17 May, 2013;
originally announced May 2013.
