-
Local structure, thermodynamics, and melting curve of boron phosphide at high pressures by deep learning-driven ab initio simulations
Authors:
N. M. Chtchelkatchev,
R. E. Ryltsev,
M. V. Magnitskaya,
S. M. Gorbunov,
K. A. Cherednichenko,
V. L. Solozhenko,
V. V. Brazhkin
Abstract:
Boron phosphide (BP) is a (super)hard semiconductor constituted of light elements, which is promising for high demand applications at extreme conditions. The behavior of BP at high temperatures and pressures is of special interest but is also poorly understood because both experimental and conventional ab initio methods are restricted to studying refractory covalent materials. The use of machine l…
▽ More
Boron phosphide (BP) is a (super)hard semiconductor constituted of light elements, which is promising for high demand applications at extreme conditions. The behavior of BP at high temperatures and pressures is of special interest but is also poorly understood because both experimental and conventional ab initio methods are restricted to studying refractory covalent materials. The use of machine learning interatomic potentials is a revolutionary trend that gives a unique opportunity for high-temperature study of materials with ab initio accuracy. We develop a deep machine learning potential (DP) for accurate atomistic simulations of solid and liquid phases of BP as well as their transformations near the melting line. Our DP provides quantitative agreement with experimental and ab initio molecular dynamics data for structural and dynamic properties. DP-based simulations reveal that at ambient pressure tetrahedrally bonded cubic BP crystal melts into an open structure consisting of two interpenetrating sub-networks of boron and phosphorous with different structures. Structure transformations of BP melts under compressing are reflected by the evolution of low-pressure tetrahedral coordination to high-pressure octahedral coordination. The main contributions to structural changes at low pressures are made by the evolution of medium-range order in B-subnetwork and at high pressures by the change of short-range order in P-sub-network. Such transformations exhibit an anomalous behavior of structural characteristics in the range of 12--15 GPa. Analysis of the results obtained raise open issues in developing machine learning potentials for covalent materials and stimulate further experimental and theoretical studies of melting behavior in BP.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
The Effect of short-range order on the viscosity and crystallization of Al-Mg melts
Authors:
Elizaveta A. Batalova,
Larisa V. Kamaeva,
Nikolay M. Chtchelkatchev
Abstract:
In this work, using the methods of viscosimetry and thermal analysis, the concentration changes in the values of the supercooling viscosity of Al-Mg melts with Mg content from 2.5 to 95 at.% are studied. It is shown that the temperature dependences of viscosity are well described by an exponential dependence. The concentration dependence of viscosity is not monotonous and reflects a change in the…
▽ More
In this work, using the methods of viscosimetry and thermal analysis, the concentration changes in the values of the supercooling viscosity of Al-Mg melts with Mg content from 2.5 to 95 at.% are studied. It is shown that the temperature dependences of viscosity are well described by an exponential dependence. The concentration dependence of viscosity is not monotonous and reflects a change in the chemical short-range order in the liquid phase. The concentration dependence of supercooling of Al-Mg melts is determined by the type of solid phase formed during solidification, and also reflects the most significant changes in the chemical short-range order in the liquid phase at 20 and 80 at.% Mg. Al-Mg alloys in the concentration ranges: 0-10, 40-50 and 90-100 at.% Mg are prone to non-equilibrium crystallization, the formation of quasi-eutectics and solidification without intermediate intermetallic phases.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Concentration behavior of liquidus temperatures and undercooling of Al-Cu-Co at normal pressure
Authors:
Larisa V. Kamaeva,
Elena N. Tsiok,
Nikolay M. Chtchelkatchev
Abstract:
Differential thermal analysis has been conducted for the Al-Cu-Co alloys with the composition range of 15 at.% Co and 10 to 30 at.% Cu, and 25 at.% Co and 2.5 to 20 at.% Co. The features of the formation of solid phases have been studied during the crystallization in a crucible in the conditions of slow cooling (rate of cooling to 1 K s-1) at normal pressure. On the state diagram of the Al-Cu-Co s…
▽ More
Differential thermal analysis has been conducted for the Al-Cu-Co alloys with the composition range of 15 at.% Co and 10 to 30 at.% Cu, and 25 at.% Co and 2.5 to 20 at.% Co. The features of the formation of solid phases have been studied during the crystallization in a crucible in the conditions of slow cooling (rate of cooling to 1 K s-1) at normal pressure. On the state diagram of the Al-Cu-Co system with 15 at.% Co and 25 at.% Cu the concentration sections have been built, which allows to determine the concentration ranges from which different phases are formed during the first stage of crystallization. Along the boundaries of different phase regions, extrema are observed on the liquidus line. The observed extrema on the liquidus lines and concentration dependences of undercooling are associated with change in the chemical short-range order at the considered concentrations both in the liquid and solid states.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Solidification of the Glass-Forming Al86Ni2Co6Gd6 Melt under High Pressure
Authors:
S. G. Menshikova,
N. M. Chtchelkatchev,
V. V. Brazhkin
Abstract:
High pressures allow the synthesis of new metastable compounds that remain intact for a sufficiently long time at normal conditions. Until now, it has not been fully understood how pressure, glass-forming ability and solidification of liquids are interconnected. We have investigated the structure of the glass-forming eutectic alloy Al86Ni2Co6Gd6 obtained by rapid cooling from the melt having a tem…
▽ More
High pressures allow the synthesis of new metastable compounds that remain intact for a sufficiently long time at normal conditions. Until now, it has not been fully understood how pressure, glass-forming ability and solidification of liquids are interconnected. We have investigated the structure of the glass-forming eutectic alloy Al86Ni2Co6Gd6 obtained by rapid cooling from the melt having a temperature of 1800 K under a pressure of 10 GPa. X-ray diffraction analysis and electron microscopy show that the samples are homogeneous and dense. The structure is finely dispersed. New stable crystalline phases with cubic (cP4/2) and tetragonal (tI26/1) structures are formed in the alloy. The studies have shown that the average microhardness of the samples obtained at 10 GPa is almost 2 times higher than that of the original sample at atmospheric pressure and is about 1700 MPa. To understand the results, we used ab initio molecular dynamics and studied how the melt changes with pressure. It is shown that at a temperature of 1800 K, high pressure increases the concentration of icosahedral clusters in the melt so that at 10 GPa atoms inside the icosahedra form a percolation cluster, while at atmospheric pressure they do not. Thus, the glass-forming ability of a melt increases at high pressure strongly influencing solidification processes.
△ Less
Submitted 7 November, 2022;
originally announced November 2022.
-
Structure and solidification of the (Fe0.75B0.15Si0.1)100-xTax (x=0-2) melts: experiment and machine learning
Authors:
I. V. Sterkhova,
L. V. Kamaeva,
V. I. Ladyanov,
N. M. Chtchelkatchev
Abstract:
Fe-B-Si system is a matrix for synthesis of new functional materials with exceptional magnetic and mechanical properties. Progress in this area is associated with the search for optimal doping conditions. This theoretical and experimental study is aimed to address the influence of Ta alloying on the structure of undercooled (Fe0.75B0.15Si0.1)100-xTax (x=0-2) melts, their undercoolability and the p…
▽ More
Fe-B-Si system is a matrix for synthesis of new functional materials with exceptional magnetic and mechanical properties. Progress in this area is associated with the search for optimal doping conditions. This theoretical and experimental study is aimed to address the influence of Ta alloying on the structure of undercooled (Fe0.75B0.15Si0.1)100-xTax (x=0-2) melts, their undercoolability and the processes of structure formation during solidification. Small concentration of Ta complicates standard ab initio and machine learning investigations. We developed a technique for fast and stable training of machine learning interatomic potential (MLIP) in this case and uncovered the structure of the undercooled melts. Molecular dynamic simulations with MLIP showed that at Ta concentration of 1 at.% there is a sharp change in the chemical short-range ordering in the melt associated with a change in the interaction of Ta atoms. This effect leads to a restructuring of the cluster formation in the system. At the same time, our experimental investigation shows that melts with a Ta content of 1 at.% have the greatest tendency to undercoolability. Alloying with Ta promotes the formation of primary crystals of Fe2B, and at a concentration of more than 1.5 at.% Ta, also of FeTaB. Herewith, near 1 at.% Ta, the crystallization of the melt proceeds nontrivially: with the formation of two intermediate metastable phases Fe3B and Fe2Ta Laves phase. Also, the highest tendency to amorphization under conditions of quick quenching is exhibited by a melt with a Ta concentration of 1 at.%. The results not only provide understanding of optimal alloying of Fe-B-Si materials but also promote a machine learning method for numerical design of metallic alloys with a small dopant concentration.
△ Less
Submitted 7 November, 2022;
originally announced November 2022.
-
Deep machine learning potentials for multicomponent metallic melts: development, predictability and compositional transferability
Authors:
R. E. Ryltsev,
N. M. Chtchelkatchev
Abstract:
The use of machine learning interatomic potentials (MLIPs) in simulations of materials is a state-of-the-art approach, which allows achieving nearly \textit{ab initio} accuracy with orders of magnitude less computational cost. Multicomponent disordered systems have a highly complicated potential energy surface due to both topological and compositional disorder. That arises issues in MLIPs developi…
▽ More
The use of machine learning interatomic potentials (MLIPs) in simulations of materials is a state-of-the-art approach, which allows achieving nearly \textit{ab initio} accuracy with orders of magnitude less computational cost. Multicomponent disordered systems have a highly complicated potential energy surface due to both topological and compositional disorder. That arises issues in MLIPs developing, such as optimal design strategy of potentials and their predictability and transferability. Here we address MLIPs for multicomponent metallic melts taking the ternary Al-Cu-Ni ones as a convenient example. We use many-body deep machine learning potentials as implemented in the DeePMD-kit to build MLIP that allows describing both atomic structure and dynamics of the system in the whole composition range. Doing that we consider different sets of neural networks hyperparameters and learning schemes to create an optimal MLIP, which allows archiving good accuracy in comparison with both \textit{ab initio} and experimental data. We find that developed MLIP demonstrates good compositional transferability, which extends far beyond compositional fluctuations in the training configurations. The results obtained open up prospects for simulating structural and dynamical properties of multicomponent metallic alloys with MLIPs.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Freezing of two-length-scale systems: complexity, universality and prediction
Authors:
R. E. Ryltsev,
N. M. Chtchelkatchev,
V. Ankudinov,
V. N. Ryzhov,
M. Apel,
P. K. Galenko
Abstract:
Two-length-scale pair potentials arise ubiquitously in condensed matter theory as effective interparticle interactions in molecular, metallic and soft matter systems. The existence of two different bond lengths generated by the shape of potential causes complex behavior in even one-component systems: polymorphism in solid and liquid states, water-like anomalies, the formation of quasicrystals and…
▽ More
Two-length-scale pair potentials arise ubiquitously in condensed matter theory as effective interparticle interactions in molecular, metallic and soft matter systems. The existence of two different bond lengths generated by the shape of potential causes complex behavior in even one-component systems: polymorphism in solid and liquid states, water-like anomalies, the formation of quasicrystals and high stability against crystallization. Here we address general properties of freezing in one-component two-length-scale systems and argue that the formation of solid phases during cooling a liquid is essentially determined by the radial distribution function (RDF) of the liquid. We show that different two-length-scale systems having similar RDF freeze into the same solid phases. In most cases, the similarity between RDFs can be expressed by the proximity of two dimensionless effective parameters: the ratio between effective bond lengths, $λ$, and the fraction of short-bonded particles $φ$. We validate this idea by studying the formation of different solid phases in different two-length-scale systems. The method proposed allows predicting effectively the formation of solid phases in both numerical simulations and self-assembling experiments in soft matter systems with tunable interactions.
△ Less
Submitted 23 November, 2020; v1 submitted 7 December, 2019;
originally announced December 2019.
-
The uncertainty of glass transition temperature in molecular dynamics simulations and numerical algorithm for its unique determination
Authors:
N. M. Chtchelkatchev,
R. E. Ryltsev,
V. Ankudinov,
V. N. Ryzhov,
M. Apel,
P. K. Galenko
Abstract:
When the cooling rate $v$ is smaller than a certain material-dependent threshold, the glass transition temperature $T_g$ becomes to a certain degree the "material parameter" being nearly independent on the cooling rate. The common method to determine $T_g$ is to extrapolate viscosity $ν$ of the liquid state at temperatures not far above the freezing conditions to lower temperatures where liquid fr…
▽ More
When the cooling rate $v$ is smaller than a certain material-dependent threshold, the glass transition temperature $T_g$ becomes to a certain degree the "material parameter" being nearly independent on the cooling rate. The common method to determine $T_g$ is to extrapolate viscosity $ν$ of the liquid state at temperatures not far above the freezing conditions to lower temperatures where liquid freezes and viscosity is hardly measurable. It is generally accepted that the glass transition occurs when viscosity drops by $13\leq n\leq17$ orders of magnitude. The accuracy of $T_g$ depends on the extrapolation quality. We propose here an algorithm for a unique determining of $T_g$. The idea is to unambiguously extrapolate $ν(T)$ to low temperatures without relying upon a specific model. It can be done using the numerical analytical continuation of $ν(T)$-function from above $T_g$ where it is measurable, to $T\gtrsim T_g$. For numerical analytical continuation, we use the Pade approximant method.
△ Less
Submitted 24 November, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Ab initio study of lattice dynamics of dodecaborides ZrB12 and LuB12
Authors:
N. M. Chtchelkatchev,
M. V. Magnitskaya,
E. S. Clementyev,
P. A. Alekseev
Abstract:
We performed ab initio lattice-dynamics calculations of frame-cluster dodecaborides ZrB12 and LuB12. As a whole, our calculated phonon frequencies and atom-projected density of states are consistent with the results of available first-principles calculations and experimental measurements. So we conclude that the ab initio DFT approach is quite appropriate to study the sufficiently subtle physics o…
▽ More
We performed ab initio lattice-dynamics calculations of frame-cluster dodecaborides ZrB12 and LuB12. As a whole, our calculated phonon frequencies and atom-projected density of states are consistent with the results of available first-principles calculations and experimental measurements. So we conclude that the ab initio DFT approach is quite appropriate to study the sufficiently subtle physics of these compounds. Our experiment-independent calculations provide an explicit quantitative confirmation of mixing the eigenvectors of boron and metal vibrations, which was previously observed in experiments.
△ Less
Submitted 20 October, 2019;
originally announced October 2019.
-
Al-Cu-Fe alloys: the relationship between the quasicrystal and its melt
Authors:
L. V. Kamaeva,
R. E. Ryltsev,
V. I. Lad'yanov,
N. M. Chtchelkatchev
Abstract:
Understanding the mechanisms which relate properties of liquid and solid phases is crucial for fabricating new advanced solid materials, such as glasses, quasicrystals and high-entropy alloys. Here we address this issue for quasicrystal-forming Al-Cu-Fe alloys which can serve as a model for studying microscopic mechanisms of quasicrystal formation. We study experimentally two structural-sensitive…
▽ More
Understanding the mechanisms which relate properties of liquid and solid phases is crucial for fabricating new advanced solid materials, such as glasses, quasicrystals and high-entropy alloys. Here we address this issue for quasicrystal-forming Al-Cu-Fe alloys which can serve as a model for studying microscopic mechanisms of quasicrystal formation. We study experimentally two structural-sensitive properties of the liquid -- viscosity and undercoolability -- and compare results with \textit{ab initio} investigations of short-range order (SRO). We observe that SRO in Al-Cu-Fe melts is polytetrahedral and mainly presented by distorted Kasper polyhedra. However, topologically perfect icosahedra are almost absent an even stoichiometry of icosahedral quasicrystal phase that suggests the topological structure of local polyhedra does not survive upon melting. It is shown that the main features of interatomic interaction in Al-Cu-Fe system, extracted from radial distribution function and bong-angle distribution function, are the same for both liquid and solid states. In particular, the system demonstrates pronounced repulsion between Fe and Cu as well as strong chemical interaction between Fe and Al, which are almost concentration-independent. We argue that SRO and structural-sensitive properties of a melt may serve as useful indicators of solid phase formation. In particular, in the concentration region corresponding to the composition of the icosahedral phase, a change in the chemical short-range order is observed, which leads to minima on the viscosity and udercoolability isotherms and has a noticeable effect on the initial stage of solidification.
△ Less
Submitted 11 August, 2019;
originally announced August 2019.
-
Stability of vacancy-free crystalline phases of titanium monoxide at high pressure and temperature
Authors:
N. M. Chtchelkatchev,
R. E. Ryltsev,
M. V. Magnitskaya,
Andrey A. Rempel
Abstract:
There have existed for a long time a paradigm that TiO phases at ambient conditions are stable only if structural vacancies are available. Using an evolutionary algorithm, we perform an ab initio search of possible zero-temperature polymorphs of TiO in wide pressure interval. We obtain the Gibbs energy of the competing phases taking into account entropy via quasiharmonic approximation and build th…
▽ More
There have existed for a long time a paradigm that TiO phases at ambient conditions are stable only if structural vacancies are available. Using an evolutionary algorithm, we perform an ab initio search of possible zero-temperature polymorphs of TiO in wide pressure interval. We obtain the Gibbs energy of the competing phases taking into account entropy via quasiharmonic approximation and build the pressure-temperature diagram of the system. We reveal that two vacancy-free hexagonal phases are the most stable at relatively low temperatures in a wide range of pressures. The transition between these phases takes place at 28 GPa. Only above 1290 K at ambient pressure the phases with vacancies (B1-derived) become stable. In particular, the high-pressure hexagonal phase is shown to have unusual electronic properties, with a pronounced pseudo-gap in the electronic spectrum. The comparison of DFT-GGA and GW calculations demonstrates that the account for many-body corrections significantly changes the electronic spectrum near the Fermi energy.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Ab initio study of noncentrosymmetric transition-metal monogermanide B20-RhGe synthesized at high temperature and pressure
Authors:
N. M. Chtchelkatchev,
M. V. Magnitskaya,
A. V. Tsvyashchenko
Abstract:
We present ab initio density-functional study of the noncentrosymmetric B20-type phase of RhGe, which is not found in nature and can be synthesized only at extreme pressures and temperatures. The structural, thermodynamic, electronic, lattice-dynamical, and transport properties of B20-RhGe are calculated, and their evolution with increasing pressure is traced. The temperature dependence of the cha…
▽ More
We present ab initio density-functional study of the noncentrosymmetric B20-type phase of RhGe, which is not found in nature and can be synthesized only at extreme pressures and temperatures. The structural, thermodynamic, electronic, lattice-dynamical, and transport properties of B20-RhGe are calculated, and their evolution with increasing pressure is traced. The temperature dependence of the charge and heat transport properties is evaluated within the semi-classical Boltzmann approach. Using the quasi-harmonic approximation, we determine the range of pressures and temperatures, in which B20-RhGe is stable, and make recommendations for optimizing the synthesis conditions in order to reduce the number of defects that occur in a sample during solidification.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Phase selection and microstructure of slowly solidified Al-Cu-Fe alloys
Authors:
L. V. Kamaeva,
I. V. Sterkhova,
V. I. Ladyanov,
R. E. Ryltsev,
N. M. Chtchelkatchev
Abstract:
The search for effective methods to fabricate bulk single-phase quasicrystalline Al-Cu-Fe alloys is currently an important task. Crucial to solving this problem is to understand mechanisms of phase formation in this system. Here we study crystallization sequence during solidification as well as the conditions of solid phase formation in slowly solidified Al-Cu-Fe alloys in a wide range of composit…
▽ More
The search for effective methods to fabricate bulk single-phase quasicrystalline Al-Cu-Fe alloys is currently an important task. Crucial to solving this problem is to understand mechanisms of phase formation in this system. Here we study crystallization sequence during solidification as well as the conditions of solid phase formation in slowly solidified Al-Cu-Fe alloys in a wide range of compositions. Concentration dependencies of undercoolability were also constructed by differential thermal analysis method. These experimental results are compared with data on chemical short-range order in the liquid state determined from \textit{ab initio} molecular dynamic simulations. We observe that main features of interatomic interaction in the Al-Cu-Fe alloys are similar for both liquid and solid states and they change in the vicinity of i-phase composition. In the concentration region, where the i-phase forms from the melt, both the undercoolability and the crystallization character depend on the temperature of the melts before cooling.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Polytetrahedral short-range order and crystallization stability in supercooled ${\rm Cu_{64.5}Zr_{35.5}}$ metallic liquid
Authors:
R. E. Ryltsev,
N. M. Chtchelkatchev
Abstract:
Development of reliable interatomic potentials is crucial for theoretical studies of relationship between chemical composition, structure and observable properties in glass-forming metallic alloys. Due to ambiguity of potential parametrization procedure, some crucial properties of the system, such as crystallization stability or symmetry of the ground state crystal phase, may not be correctly repr…
▽ More
Development of reliable interatomic potentials is crucial for theoretical studies of relationship between chemical composition, structure and observable properties in glass-forming metallic alloys. Due to ambiguity of potential parametrization procedure, some crucial properties of the system, such as crystallization stability or symmetry of the ground state crystal phase, may not be correctly reproduced in computer simulations. Here we address this issue for ${\rm Cu_{64.5}Zr_{35.5}}$ alloy described by two modifications of embedded atom model potential as well as by \textit{ab initio} molecular dynamics. We observe that, at low supercooling, both models provide very similar liquid structure, which agrees with that obtained by \textit{ab initio} simulations. Hoverer, deeply supercooled liquids demonstrate essentially different local structure and so different crystallization stability. The system, which demonstrate more pronounced icosahedral sort-range order, is more stable to crystallization that is in agreement with Frank hypothesis.
△ Less
Submitted 16 June, 2019;
originally announced June 2019.
-
Theoretical and experimental study of high-pressure synthesized B20-type compounds Mn$_{1-x}$(Co,Rh)$_x$Ge
Authors:
N. M. Chtchelkatchev,
M. V. Magnitskaya,
V. A. Sidorov,
L. N. Fomicheva,
A. E. Petrova,
A. V. Tsvyashchenko
Abstract:
The search and exploration of new materials not found in nature is one of modern trends in pure and applied chemistry. In the present work, we report on experimental and \textit{ab initio} density-functional study of the high-pressure-synthesized series of compounds Mn$_{1-x}$(Co,Rh)$_x$Ge. These high-pressure phases remain metastable at normal conditions, therewith they preserve their inherent no…
▽ More
The search and exploration of new materials not found in nature is one of modern trends in pure and applied chemistry. In the present work, we report on experimental and \textit{ab initio} density-functional study of the high-pressure-synthesized series of compounds Mn$_{1-x}$(Co,Rh)$_x$Ge. These high-pressure phases remain metastable at normal conditions, therewith they preserve their inherent noncentrosymmetric B20-type structure and chiral magnetism. Of particular interest in these two isovalent systems is the comparative analysis of the effect of $3d$ (Co) and $4d$ (Rh) substitution for Mn, since the $3d$ orbitals are characterized by higher localization and electron interaction than the $4d$ orbitals. The behavior of Mn$_{1-x}$(Co,Rh)$_x$Ge systems is traced as the concentration changes in the range $0 \leq x \leq 1$. We applied a sensitive experimental and theoretical technique which allowed to refine the shape of the temperature dependencies of magnetic susceptibility $χ(T)$ and thereby provide a new and detailed magnetic phase diagram of Mn$_{1-x}$Co$_x$Ge. It is shown that both systems exhibit a helical magnetic ordering that very strongly depends on the composition $x$. However, the phase diagram of Mn$_{1-x}$Co$_x$Ge differs from that of Mn$_{1-x}$Rh$_x$Ge in that it is characterized by coexistence of two helices in particular regions of concentrations and temperatures.
△ Less
Submitted 15 January, 2019;
originally announced January 2019.
-
Nucleation instability in super-cooled Cu-Zr-Al glass-forming liquids
Authors:
R. E. Ryltsev,
B. A. Klumov,
N. M. Chtchelkatchev,
K. Yu. Shunyaev
Abstract:
Special role in computer simulations of supercooled liquid and glasses is played by few general models representing certain classes of real glass-forming systems. Recently, it was shown that one of the most widely used model glassformers -- Kob-Andersen binary Lennard-Jones mixture -- crystalizes in quite lengthy molecular dynamics simulations and, moreover, it is in fact a very poor glassformer a…
▽ More
Special role in computer simulations of supercooled liquid and glasses is played by few general models representing certain classes of real glass-forming systems. Recently, it was shown that one of the most widely used model glassformers -- Kob-Andersen binary Lennard-Jones mixture -- crystalizes in quite lengthy molecular dynamics simulations and, moreover, it is in fact a very poor glassformer at large system sizes. Thus, our understanding of crystallization stability of model glassformers is far from complete due to the fact that relatively small system sizes and short timescales have been considered so far. Here we address this issue for two embedded atom models intensively used last years in numerical studies of Cu-Zr-(Al) bulk metallic glasses. We consider ${\rm Cu_{64.5}Zr_{35.5}}$ and ${\rm Cu_{46}Zr_{46}Al_{8}}$ alloys as those having high glass-forming ability. Exploring their structural evolution at continuous cooling and isothermal annealing, we observe that both systems nucleate in sufficiently lengthy simulations, though ${\rm Cu_{46}Zr_{46}Al_{8}}$ demonstrate order of magnitude higher critical nucleation time. Moreover, ${\rm Cu_{64.5}Zr_{35.5}}$ is actually unstable to crystallization for large system sizes ($N > 20,000$). Both systems crystallize with the formation of tetrahedrally close packed Laves phases of different types. We reveal that structure of both systems in liquid and glassy state contains comparable amount of polytetrahedral clusters. We argue that nucleation instability of simulated ${\rm Cu_{64.5}Zr_{35.5}}$ alloy is due to the fact that its composition is very close to that for stable ${\rm Cu_2 Zr}$ compound with C15 Laves phase structure.
△ Less
Submitted 1 September, 2018;
originally announced September 2018.
-
Structure and glass-forming ability of simulated Ni-Zr alloys
Authors:
B. A. Klumov,
R. E. Ryltsev,
N. M. Chtchelkatchev
Abstract:
Binary Cu-Zr system is a representative bulk glassformer demonstrating high glass forming ability due to pronounced icosahedral local ordering. From the first glance, Ni-Zr system is the most natural object to expect the same behavior because nickel and copper are neighbours in the periodic table and have similar physicochemical properties. However, doing molecular dynamics simulations of…
▽ More
Binary Cu-Zr system is a representative bulk glassformer demonstrating high glass forming ability due to pronounced icosahedral local ordering. From the first glance, Ni-Zr system is the most natural object to expect the same behavior because nickel and copper are neighbours in the periodic table and have similar physicochemical properties. However, doing molecular dynamics simulations of $\rm Ni_αZr_{1-α}$ alloys described by embedded atom model potential, we observe different behaviour. We conclude that the Ni-Zr system has the same glass-forming ability as an additive binary Lennard-Jones mixture without any chemical interaction. The structural analysis reveals that icosahedral ordering in Ni-Zr alloys is much less pronounced than that in the Cu-Zr ones. We suggest that lack of icosahedral ordering due to peculiarities of interatomic interactions is the reason of relatively poor glass-forming ability of Ni-Zr system.
△ Less
Submitted 14 May, 2018;
originally announced May 2018.
-
Cooling rate dependence of simulated ${\rm Cu_{64.5}Zr_{35.5}}$ metallic glass structure
Authors:
R. E. Ryltsev,
B. A. Klumov,
N. M. Chtchelkatchev
Abstract:
Using molecular dynamics simulations with embedded atom model potential, we study structural evolution of ${\rm Cu_{64.5}Zr_{35.5}}$ alloy during the cooling in a wide range of cooling rates $γ\in(1.5\cdot 10^{9},10^{13})$ K/s. Investigating short- and medium-range order, we show that structure of ${\rm Cu_{64.5}Zr_{35.5}}$ metallic glass essentially depends on cooling rate. In particular, a decre…
▽ More
Using molecular dynamics simulations with embedded atom model potential, we study structural evolution of ${\rm Cu_{64.5}Zr_{35.5}}$ alloy during the cooling in a wide range of cooling rates $γ\in(1.5\cdot 10^{9},10^{13})$ K/s. Investigating short- and medium-range order, we show that structure of ${\rm Cu_{64.5}Zr_{35.5}}$ metallic glass essentially depends on cooling rate. In particular, a decrease of the cooling rate leads to a increase of abundances of both the icosahedral-like clusters and Frank-Kasper Z16 polyhedra. The amounts of these clusters in the glassy state drastically increase at the $γ_{\rm min}=1.5\cdot 10^{9}$ K/s. Analysing the structure of the glass at $γ_{\rm min}$, we observe the formation of nano-sized crystalline grain of ${\rm Cu_2Zr}$ intermetallic compound with the structure of ${\rm Cu_2Mg}$ Laves phase. The structure of this compound is isomorphous with that for ${\rm Cu_5Zr}$ intermetallic compound. Both crystal lattices consist of two type of clusters: Cu-centered 13-atom icosahedral-like cluster and Zr-centered 17-atom Frank-Kasper polyhedron Z16. That suggests the same structural motifs for the metallic glass and intermetallic compounds and explains the drastic increase of the abundances of these clusters observed at $γ_{\rm min}$.
△ Less
Submitted 24 April, 2016;
originally announced April 2016.
-
Self-consistent Description of Graphene Quantum Amplifier
Authors:
Yu. E. Lozovik,
I. A. Nechepurenko,
A. V. Dorofeenko,
E. S. Andrianov,
N. M. Chtchelkatchev,
A. A Pukhov
Abstract:
High level of dissipation in normal metals makes challenging development of active and passive plasmonic devices. One possible solution to this problem is to use alternative materials. Graphene is a good candidate for plasmonics in near infrared (IR) region. In this paper we develop quantum theory of a graphene plasmon generator. We account for the first time quantum correlations and dissipation e…
▽ More
High level of dissipation in normal metals makes challenging development of active and passive plasmonic devices. One possible solution to this problem is to use alternative materials. Graphene is a good candidate for plasmonics in near infrared (IR) region. In this paper we develop quantum theory of a graphene plasmon generator. We account for the first time quantum correlations and dissipation effects that allows describing such regimes of quantum plasmonic amplifier as surface plasmon emitting diode and surface plasmon amplifier by stimulated emission of radiation. Switching between these generation types is possible in situ with variance of graphene Fermi-level or gain transition frequency. We provide explicit expressions for dissipation and interaction constants through material parameters and find the generation spectrum and correlation function of second order which predicts laser statistics.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
Pade spectroscopy of structural correlation functions: application to liquid gallium
Authors:
N. M. Chtchelkatchev,
B. A. Klumov,
R. E. Ryltsev,
R. M. Khusnutdinoff,
A. V. Mokshin
Abstract:
We propose the new method of fluid structure investigation which is based on numerical analytical continuation of structural correlation functions with Pade approximants. The method particularly allows extracting hidden structural features of non-ordered condensed matter systems from experimental diffraction data. The method has been applied to investigating the local order of liquid gallium which…
▽ More
We propose the new method of fluid structure investigation which is based on numerical analytical continuation of structural correlation functions with Pade approximants. The method particularly allows extracting hidden structural features of non-ordered condensed matter systems from experimental diffraction data. The method has been applied to investigating the local order of liquid gallium which has non-trivial stricture in both the liquid and solid states. Processing the correlation functions obtained from molecular dynamic simulations, we show the method proposed reveals non-trivial structural features of liquid gallium such as the spectrum of length-scales and the existence of different types of local clusters in the liquid.
△ Less
Submitted 3 December, 2015;
originally announced December 2015.
-
Singularity band of velocity auto correlation function of Lennard-Jones fluid in complex $ω$-plain
Authors:
N. M. Chtchelkatchev,
R. E. Ryltsev
Abstract:
It is well known from the quantum theory of strongly correlated systems that poles (or more subtle singularities) of dynamic correlation functions in complex plane usually correspond to the collective or localized modes. Here we address singularities of velocity autocorrelation function $Z$ in complex $ω$-plain for the one-component particle system with isotropic pair potential. We have found that…
▽ More
It is well known from the quantum theory of strongly correlated systems that poles (or more subtle singularities) of dynamic correlation functions in complex plane usually correspond to the collective or localized modes. Here we address singularities of velocity autocorrelation function $Z$ in complex $ω$-plain for the one-component particle system with isotropic pair potential. We have found that naive few poles picture fails to describe analytical structure of $Z(ω)$ of Lennard-Jones particle system in complex plain. Instead of few isolated poles we see the singularity manifold of $Z(ω)$ forming branch cuts that suggests Lennard-Jones velocity autocorrelation function is a multiple-valued function of complex frequency. The brunch cuts are separated from the real axis by the well-defined "gap". The gap edges extend approximately parallel to the real frequency axis. The singularity structure is very stable under increase of the temperature; we have found its trace at temperatures even several orders of magnitude higher than the melting point. Our working hypothesis that the branch cut origin is related to the "interference" in $Z$ of one-particle kinetics and collective hydrodynamic motion.
△ Less
Submitted 16 July, 2015;
originally announced July 2015.
-
Noisy metamolecule: strong narrowing of fluorescence line
Authors:
E. S. Andrianov,
N. M. Chtchelkatchev,
A. A. Pukhov
Abstract:
We consider metamolecule consisting of bosonic mode correlated with the two-level system: it can be, for example, plasmonic mode interacting with the quantum dot. We focus on the parameter range where all the correlations are strong and of the same order: interaction between bosonic mode correlated with the two-level system, external coherent drive and dissipation. Quantum Monte-Carlo simulations…
▽ More
We consider metamolecule consisting of bosonic mode correlated with the two-level system: it can be, for example, plasmonic mode interacting with the quantum dot. We focus on the parameter range where all the correlations are strong and of the same order: interaction between bosonic mode correlated with the two-level system, external coherent drive and dissipation. Quantum Monte-Carlo simulations show a fluorescence of this system at dissipation larger than the driving amplitude and strong (by the order of magnitude) narrowing of its spectral line. This effect may be related to kind of a quantum stochastic resonance. We show that the fluorescence corresponds to finite domain over the coherent drive with sharp lower threshold and there is splitting of the Wigner function.
△ Less
Submitted 24 July, 2015; v1 submitted 24 February, 2015;
originally announced February 2015.
-
Self-assembly of the decagonal quasicrystalline order in simple three-dimensional systems
Authors:
R. E. Ryltsev,
B. A. Klumov,
N. M. Chtchelkatchev
Abstract:
For a three dimensional system we answer two questions, how simple a particle system might be to show the quasicrystal order and, what system features are the most important for quasicrystal formation? One-component system of particles with isotropic pair interaction is one of the simplest ones. We show that such system may be driven to three-dimensional decagonal (10-fold) quasicrystalline state…
▽ More
For a three dimensional system we answer two questions, how simple a particle system might be to show the quasicrystal order and, what system features are the most important for quasicrystal formation? One-component system of particles with isotropic pair interaction is one of the simplest ones. We show that such system may be driven to three-dimensional decagonal (10-fold) quasicrystalline state just by purely repulsive, isotropic and monotonic interaction pair potential with two characteristic length scales; no attraction is needed. The second question we answer defining universal (nearly independent from the shape of the pair potential) effective integral parameters related to the first peak of the radial distribution function. The universality is illustrated by demonstrating the quasicrystalline order for a number of particle systems with absolutely different interaction potentials, both purely repulsive and attractive, but with the same effective integral parameters. Simple models like we study qualitatively describe effective interaction in molecular liquids, soft matter systems and metallic alloys for which quasicrystals have been experimentally observed.
△ Less
Submitted 3 August, 2015; v1 submitted 27 October, 2014;
originally announced October 2014.
-
Two stage order-disorder transformation in simple monatomic supercritical fluid: superstable tetrahedral local order
Authors:
R. E. Ryltsev,
N. M. Chtchelkatchev
Abstract:
The local order units of dense simple liquid are typically three dimensional (close packed) clusters: hcp, fcc and icosahedrons. We show that the fluid demonstrates the superstable tetrahedral local order up to temperatures several orders of magnitude higher than the melting temperature and down to critical density. While the solid-like local order (hcp, fcc) disappears in the fluid at much lower…
▽ More
The local order units of dense simple liquid are typically three dimensional (close packed) clusters: hcp, fcc and icosahedrons. We show that the fluid demonstrates the superstable tetrahedral local order up to temperatures several orders of magnitude higher than the melting temperature and down to critical density. While the solid-like local order (hcp, fcc) disappears in the fluid at much lower temperatures and far above critical density. We conclude that the supercritical fluid shows the temperature (density) driven two stage "melting" of the three dimensional local order. We also find that the structure relaxation times in the supercritical fluid are much larger than ones estimated for weakly interactive gas even far above the melting line.
△ Less
Submitted 28 September, 2013; v1 submitted 9 August, 2013;
originally announced August 2013.
-
Nanolaser in the selfgenerated nonequilibrium environment: quantum fluctuations and entanglement
Authors:
E. S. Andrianov,
N. M. Chtchelkatchev,
A. A. Pukhov
Abstract:
We investigate the dynamics of the spaser-based nanolaser in the strong incoherent pumping regime in the quantum limit when the photon number is the order of unity. We consider the situation where the newly irradiated photon finds itself in the cloud of earlier irradiated photons that are not thermalized. As the result the entanglement of nanoparticle with quantum dot degrees of freedom in the nan…
▽ More
We investigate the dynamics of the spaser-based nanolaser in the strong incoherent pumping regime in the quantum limit when the photon number is the order of unity. We consider the situation where the newly irradiated photon finds itself in the cloud of earlier irradiated photons that are not thermalized. As the result the entanglement of nanoparticle with quantum dot degrees of freedom in the nanolaser and the lasing intensity increases several times. In fact the nonthermal bath effectively makes the nanolaser "more quantum" and master equation for the nanolaser density matrix nonlinear and selfconsistent.
△ Less
Submitted 27 July, 2013;
originally announced July 2013.
