-
0.82 um 105 W diode-pumped thulium-doped all silica fiber laser
Authors:
Changshun Hou,
Ziwei Zhai,
Nilotpal Choudhury,
Tom Harris,
Qiubai Yang,
Jayanta K. Sahu,
Johan Nilsson
Abstract:
An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in 240-us rectangular pulses. The TDFL comprises a double-clad thulium-doped fiber (TDF) which is designed and fabricated in-house and is incorporated into an all…
▽ More
An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in 240-us rectangular pulses. The TDFL comprises a double-clad thulium-doped fiber (TDF) which is designed and fabricated in-house and is incorporated into an all-fiber cavity and cladding-pumped by five pigtailed diode lasers at 0.79 um. Co-lasing at 1.9 um counteracts population trapping in 3F4. The slope efficiency relative to absorbed pump power reaches 64% QCW and 77.5% CW. QCW, the beam quality M2 becomes 2.2 (beam parameter product BPP 0.57 mm mrad) and 2.45 (BPP 0.64) in orthogonal directions at ~250 W of instantaneous output power. Additionally, a modified QCW setup is continuously wavelength-tunable from 812 nm to 835 nm. We believe this is the first reported demonstration of high-power laser operation of the 3H4 to 3H6 transition in a TDF. Given also the simplicity and other attractions of an all-silica-fiber laser with direct-diode cladding-pumping, we believe our demonstration is valuable for applications ranging from laser machining of aluminum (benefitting from an absorption peak at 0.83 um) to scientific applications including strontium-based atomic clocks and cesium-based quantum metrology.
△ Less
Submitted 14 May, 2025;
originally announced May 2025.
-
Quasi-continuous-wave-pumped thulium-doped fiber laser with 0.2 kW of instantaneous output power
Authors:
Changshun Hou,
Ziwei Zhai,
Nilotpal Choudhury,
Tom Harris,
Jayanta K. Sahu,
Johan Nilsson
Abstract:
A thulium-doped fiber laser operating quasi-continuous-wave generated 198 W of instantaneous output power in 0.2-ms pulses at 50 Hz repetition rate. The duty cycle becomes 1% and the average output power 2.0 W. This was cladding-pumped with 408 W from 0.79-um diode lasers (average pump power 4.1 W). The pump switch-on time was ~10 us at full power, with the laser exhibiting relaxation oscillations…
▽ More
A thulium-doped fiber laser operating quasi-continuous-wave generated 198 W of instantaneous output power in 0.2-ms pulses at 50 Hz repetition rate. The duty cycle becomes 1% and the average output power 2.0 W. This was cladding-pumped with 408 W from 0.79-um diode lasers (average pump power 4.1 W). The pump switch-on time was ~10 us at full power, with the laser exhibiting relaxation oscillations starting ~5 us after the start of the pumping and lasting for ~5 us. The slope efficiency with respect to absorbed pump power was 67% up to 200 W of absorbed pump power and 52% at the full 352 W of absorbed pump power. The low duty cycle simplified the heatsinking, despite the high instantaneous power and thermal load.
△ Less
Submitted 2 December, 2024;
originally announced December 2024.
-
Multimode Mamyshev Oscillator
Authors:
Henry Haig,
Pavel Sidorenko,
Anirban Dhar,
Nilotpal Choudhury,
Ranjan Sen,
Demetrios Christodoulides,
Frank Wise
Abstract:
We present a spatiotemporally mode-locked Mamyshev oscillator. A wide variety of multimode mode-locked states, with varying degrees of spatiotemporal coupling, are observed. We find that some control of the modal content of the output beam is possible through the cavity design. Comparison of simulations to experiments indicates that spatiotemporal mode-locking is enabled by nonlinear intermodal in…
▽ More
We present a spatiotemporally mode-locked Mamyshev oscillator. A wide variety of multimode mode-locked states, with varying degrees of spatiotemporal coupling, are observed. We find that some control of the modal content of the output beam is possible through the cavity design. Comparison of simulations to experiments indicates that spatiotemporal mode-locking is enabled by nonlinear intermodal interactions and spatial filtering, along with the Mamyshev mechanism. This work represents a first exploration of spatiotemporal mode-locking in an oscillator with the Mamyshev saturable absorber.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
