-
Electron beam irradiation-induced transport and recombination in p-type Gallium Oxide grown on (001) \b{eta}-Ga2O3 substrate
Authors:
Gabriel Marciaga,
Jian-Sian Li,
Chao-Ching Chiang,
Fan Ren,
Stephen J. Pearton,
Corinne Sartel,
Zeyu Chi,
Yves Dumont,
Ekaterine Chikoidze,
Alfons Schulte,
Arie Ruzin,
Leonid Chernyak
Abstract:
This study investigates minority electron diffusion length and carrier recombination phenomena within p-type, 300 nm-thick Ga2O3 epitaxial films. Utilizing Electron Beam-Induced Current (EBIC) and Cathodoluminescence (CL) spectroscopy, these characteristics were examined as a function of both temperature and the duration of electron beam excitation. While the electron diffusion length in these p-G…
▽ More
This study investigates minority electron diffusion length and carrier recombination phenomena within p-type, 300 nm-thick Ga2O3 epitaxial films. Utilizing Electron Beam-Induced Current (EBIC) and Cathodoluminescence (CL) spectroscopy, these characteristics were examined as a function of both temperature and the duration of electron beam excitation. While the electron diffusion length in these p-Ga2O3 films diminish with increasing temperature, a continuous electron beam excitation of a particular location on the surface of a p-Ga2O3 epitaxial layer leads to an elongation of the diffusion length. and decay of cathodoluminescence intensity in that location under beam exposure. These latter two effects are attributed to non-equilibrium electrons, generated by an electron beam, being captured at acceptor-related point defect levels in Gallium Oxide. The activation energies characterizing these processes were obtained from the independent EBIC and CL experiments to garner insight into defect landscape and its influence on transport and recombination dynamics.
△ Less
Submitted 20 June, 2025;
originally announced June 2025.
-
Estimating Soil Electrical Parameters in the Canadian High Arctic from Impedance Measurements of the MIST Antenna Above the Surface
Authors:
I. Hendricksen,
R. A. Monsalve,
V. Bidula,
C. Altamirano,
R. Bustos,
C. H. Bye,
H. C. Chiang,
X. Guo,
F. McGee,
F. P. Mena,
L. Nasu-Yu,
C. Omelon,
S. E. Restrepo,
J. L. Sievers,
L. Thomson,
N. Thyagarajan
Abstract:
We report the bulk soil electrical conductivity and relative permittivity at a site in the Canadian High Arctic (79.37980 degrees N, 90.99885 degrees W). The soil parameters are determined using impedance measurements of a dipole antenna mounted horizontally 52 cm above the surface. The antenna is part of the Mapper of the IGM Spin Temperature (MIST) radio cosmology experiment. The measurements we…
▽ More
We report the bulk soil electrical conductivity and relative permittivity at a site in the Canadian High Arctic (79.37980 degrees N, 90.99885 degrees W). The soil parameters are determined using impedance measurements of a dipole antenna mounted horizontally 52 cm above the surface. The antenna is part of the Mapper of the IGM Spin Temperature (MIST) radio cosmology experiment. The measurements were conducted on July 17-28, 2022, every 111 minutes, and in the frequency range 25-125 MHz. To estimate the soil parameters, we compare the impedance measurements with models produced from numerical electromagnetic simulations of the antenna, considering single- and two-layer soil models. Our best-fit soil model corresponds to a two-layer model in which the electrical parameters are consistent with unfrozen soil at the top and frozen soil underneath. The best-fit parameters further agree with measurements done at other Arctic sites with more traditional techniques, such as capacitively-coupled resistivity, electrical resistivity tomography, and ground-penetrating radar.
△ Less
Submitted 19 April, 2025;
originally announced April 2025.
-
Impact of Optic Nerve Tortuosity, Globe Proptosis, and Size on Retinal Ganglion Cell Thickness Across General, Glaucoma, and Myopic Populations: Insights from the UK Biobank
Authors:
Charis Y. N. Chiang,
Xiaofei Wang,
Stuart K. Gardiner,
Martin Buist,
Michael J. A. Girard
Abstract:
Purpose: To investigate the impact of optic nerve tortuosity (ONT), and the interaction of globe proptosis and globe size on retinal ganglion cell (RGC) thickness, using Retinal Nerve Fiber Layer (RNFL) thickness, across general, glaucoma, and myopic populations.
Methods: We analyzed 17,940 eyes from the UKBiobank cohort (ID 76442), including 72 glaucoma and 2475 myopic eyes. AI models segmented…
▽ More
Purpose: To investigate the impact of optic nerve tortuosity (ONT), and the interaction of globe proptosis and globe size on retinal ganglion cell (RGC) thickness, using Retinal Nerve Fiber Layer (RNFL) thickness, across general, glaucoma, and myopic populations.
Methods: We analyzed 17,940 eyes from the UKBiobank cohort (ID 76442), including 72 glaucoma and 2475 myopic eyes. AI models segmented structures from 3D optical coherence tomography (OCT) scans and magnetic resonance images (MRI). RNFL thickness was derived from OCT scans and corrected for ocular magnification, was derived from OCT. From MRIs, we extracted: ONT, globe proptosis, axial length, and a novel interzygomatic line-to-posterior pole (ILPP) distance, a composite marker of globe proptosis and size. GEE models assessed associations between orbital and retinal features across all populations.
Results: Segmentation models achieved Dice coefficients over 0.94 for both MRI and OCT. RNFL thickness was positively correlated with both ONT and ILPP distance (r = 0.065, p < 0.001, and r = 0.206, p < 0.001 respectively). The same was true for glaucoma (r = 0.040, p = 0.74, and r = 0.224, p = 0.059), and for myopia (r = 0.069, p < 0.001, and r = 0.100, p < 0.0001). GEE models revealed straighter optic nerves and shorter ILPP distance as predictive of thinner RNFL in all populations.
Conclusions: This study emphasizes the impact of ONT, globe size, and proptosis on retinal health, suggesting RNFL thinning may arise from biomechanical stress due to straighter optic nerves or reduced ILPP distance, particularly in glaucoma or myopia. The novel ILPP metric, integrating globe size and position, shows potential as a biomarker for axonal health. These findings highlight the role of orbit structures in RGC axonal health and warrant further exploration of the biomechanical relationship between the orbit and optic nerve.
△ Less
Submitted 19 April, 2025; v1 submitted 22 January, 2025;
originally announced February 2025.
-
Tomography Scan of Charge Density Wave in NbSe2
Authors:
Jyun-Yu Wu,
Yung-Ting Lee,
Guan-Hao Chen,
Zheng-Hong Li,
Chang-Tsan Lee,
Jie-Yu Hsu,
Chia-Nung Kuo,
Juhn-Jong Lin,
Wen-Hao Chang,
Chin-Shan Lue,
Po-Tuan Cheng,
Cheng-Tien Chiang,
Chien-Cheng Kuo,
Chien-Te Wu,
Chi-Cheng Lee,
Ming-Chiang Chung,
Hung-Chung Hsueh,
Chun-Liang Lin
Abstract:
Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized.…
▽ More
Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized. Here by using scanning tunneling microscopy (STM) and density functional theory (DFT), we have monitored the evolution of 3x3 CDW along c-axis and realized a nearly tomography scan of CDW of the topmost layer. The results show that the strength of 3x3 charge order varies while increasing the tunneling current. The 3x3 charge order is relatively strong at the outermost Se level and decreases while probing in between Se and Nb levels. Interestingly, the 3x3 charge order gets strong again as reaching Nb level but along with a phase shift. We further calculated the orbital charge distributions and found that both CDW intensity modulation and phase shift are strongly correlated with the distribution of Se p orbitals and Nb d orbitals.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Input optics systems of the KAGRA detector during O3GK
Authors:
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Bae,
Y. Bae,
L. Baiotti,
R. Bajpai,
M. A. Barton,
K. Cannon,
Z. Cao,
E. Capocasa,
M. Chan,
C. Chen,
K. Chen,
Y. Chen,
C-I. Chiang,
H. Chu,
Y-K. Chu,
S. Eguchi
, et al. (228 additional authors not shown)
Abstract:
KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit…
▽ More
KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
Plasmonic Spin-Hall Effect of propagating Surface Plasmon Polaritons in Ni$_{80}$Fe$_{20}$ microstructures
Authors:
Maximilian Paleschke,
Cheng-Tien Chiang,
Liane Brandt,
Niklas Liebing,
Georg Woltersdorf,
Wolf Widdra
Abstract:
Photoexcitation and shaping of a propagating surface plasmon polariton (SPP) on silver and gold microstructures are well established and lead to the discovery of the plasmonic spin-Hall effect recently. Whereas silver is often the material of choice due to its exceptional low plasma frequency and weak damping, similar observations have not been reported for ferromagnetic metals. In this work, we r…
▽ More
Photoexcitation and shaping of a propagating surface plasmon polariton (SPP) on silver and gold microstructures are well established and lead to the discovery of the plasmonic spin-Hall effect recently. Whereas silver is often the material of choice due to its exceptional low plasma frequency and weak damping, similar observations have not been reported for ferromagnetic metals. In this work, we report on propagating SPPs on Ni$_{80}$Fe$_{20}$ microstructures imaged by photoemission electron microscopy (PEEM) in combination with a tunable femtosecond laser system at MHz repetition rate. Circular dichroic (CD) images in threshold PEEM show clear edge-induced SPPs with sub-micrometer wavelength and propagation length of about 3.5 $μ$m. Analysis of the interference patterns as well as the coupling of the optical spin angular momentum to the observed fringe fields reveal propagation characteristics exclusive to evanescent waves and the presence of the plasmonic spin-Hall effect. Our work provides direct evidence that many materials with a high plasma frequency allow for excitation and observation of propagating SPPs at the dielectric/metal interface via CD PEEM imaging, enabling magnetoplasmonic investigation of common ferromagnets on nanometer length and femtosecond time scales.
△ Less
Submitted 4 June, 2021; v1 submitted 26 May, 2021;
originally announced May 2021.
-
Design and implementation of a noise temperature measurement system for the Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX)
Authors:
Emily R. Kuhn,
Benjamin R. B. Saliwanchik,
Maile Harris,
Moumita Aich,
Kevin Bandura,
Tzu-Ching Chang,
H. Cynthia Chiang,
Devin Crichton,
Aaron Ewall-Wice,
Austin A. Gumba,
N. Gupta,
Kabelo Calvin Kesebonye,
Jean-Paul Kneib,
Martin Kunz,
Kavilan Moodley,
Laura B. Newburgh,
Viraj Nistane,
Warren Naidoo,
Deniz Ölçek,
Jeffrey B. Peterson,
Alexandre Refregier,
Jonathan L. Sievers,
Corrie Ungerer,
Alireza Vafaei Sadr,
Jacques van Dyk
, et al. (2 additional authors not shown)
Abstract:
This paper describes the design, implementation, and verification of a test-bed for determining the noise temperature of radio antennas operating between 400-800MHz. The requirements for this test-bed were driven by the HIRAX experiment, which uses antennas with embedded amplification, making system noise characterization difficult in the laboratory. The test-bed consists of two large cylindrical…
▽ More
This paper describes the design, implementation, and verification of a test-bed for determining the noise temperature of radio antennas operating between 400-800MHz. The requirements for this test-bed were driven by the HIRAX experiment, which uses antennas with embedded amplification, making system noise characterization difficult in the laboratory. The test-bed consists of two large cylindrical cavities, each containing radio-frequency (RF) absorber held at different temperatures (300K and 77K), allowing a measurement of system noise temperature through the well-known 'Y-factor' method. The apparatus has been constructed at Yale, and over the course of the past year has undergone detailed verification measurements. To date, three preliminary noise temperature measurement sets have been conducted using the system, putting us on track to make the first noise temperature measurements of the HIRAX feed and perform the first analysis of feed repeatability.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Ionic-strength and pH dependent reactivities of ascorbic acid toward ozone in aqueous micro-droplets studied by aerosol optical tweezers
Authors:
Yuan-Pin Chang,
Shan-Jung Wu,
Min-Sian Lin,
Che-Yu Chiang,
Genin Gary Huang
Abstract:
The heterogeneous oxidation reaction of single aqueous ascorbic acid (AH$_2$) aerosol particles with gas-phase ozone was investigated in this study utilizing aerosol optical tweezers with Raman spectroscopy. The measured liquid-phase bimolecular rate coefficients of the AH$_2$ + O$_3$ reaction exhibit a significant pH dependence, and the corresponding values at ionic strength 0.2 M are…
▽ More
The heterogeneous oxidation reaction of single aqueous ascorbic acid (AH$_2$) aerosol particles with gas-phase ozone was investigated in this study utilizing aerosol optical tweezers with Raman spectroscopy. The measured liquid-phase bimolecular rate coefficients of the AH$_2$ + O$_3$ reaction exhibit a significant pH dependence, and the corresponding values at ionic strength 0.2 M are $(3.1 \pm 2.0) \times 10^5$ M$^{-1}$s$^{-1}$ and $(1.2 \pm 0.6) \times 10^7$ M$^{-1}$s$^{-1}$ for pH $\approx$ 2 and 6, respectively. These results measured in micron-sized droplets agree with those from previous bulk measurements, indicating that the observed aerosol reaction kinetics can be solely explained by liquid phase diffusion and AH$_2$ + O$_3$ reaction. Furthermore, the results indicate that high ionic strengths could enhance the liquid-phase rate coefficients of the AH$_2$ + O$_3$ reaction. The results also exhibit a negative ozone pressure dependence that can be rationalized in terms of a Langmuir-Hinshelwood type mechanism for the heterogeneous oxidation of AH$_2$ aerosol particles by gas-phase ozone. The results of the present work imply that in acidified airway-lining fluids the antioxidant ability of AH$_2$ against atmospheric ozone will be significantly suppressed.
△ Less
Submitted 11 May, 2021; v1 submitted 20 December, 2020;
originally announced December 2020.
-
First experimental constraints on WIMP couplings in the effective field theory framework from CDEX
Authors:
Y. Wang,
Z. Zeng,
Q. Yue,
L. T. Yang,
K. J. Kang,
Y. J. Li,
M. Agartioglu,
H. P. An,
J. P. Chang,
J. H. Chen,
Y. H. Chen,
J. P. Cheng,
C. Y. Chiang,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
X. Y. Guo,
H. J. He,
L. He,
S. M. He,
J. W. Hu,
T. C. Huang
, et al. (63 additional authors not shown)
Abstract:
We present weakly interacting massive particles (WIMPs) search results performed using two approaches of effective field theory from the China Dark Matter Experiment (CDEX), based on the data from both CDEX-1B and CDEX-10 stages. In the nonrelativistic effective field theory approach, both time-integrated and annual modulation analyses were used to set new limits for the coupling of WIMP-nucleon e…
▽ More
We present weakly interacting massive particles (WIMPs) search results performed using two approaches of effective field theory from the China Dark Matter Experiment (CDEX), based on the data from both CDEX-1B and CDEX-10 stages. In the nonrelativistic effective field theory approach, both time-integrated and annual modulation analyses were used to set new limits for the coupling of WIMP-nucleon effective operators at 90% confidence level (C.L.) and improve over the current bounds in the low $m_χ$ region. In the chiral effective field theory approach, data from CDEX-10 were used to set an upper limit on WIMP-pion coupling at 90% C.L. We for the first time extended the limit to the $m_χ<$ 6 GeV/$c^2$ region.
△ Less
Submitted 26 April, 2021; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Particle response of antenna-coupled TES arrays: results from SPIDER and the lab
Authors:
B. Osherson,
J. P. Filippini,
J. Fu,
R. V. Gramillano,
R. Gualtieri,
E. C. Shaw,
P. A. R. Ade,
M. Amiri,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
O. Dore,
A. A. Fraisse,
A. E. Gambrel,
N. N. Gandilo,
J. E. Gudmundsson,
M. Halpern,
J. Hartley,
M. Hasselfield,
G. Hilton,
W. Holmes,
V. V. Hristov
, et al. (23 additional authors not shown)
Abstract:
Future mm-wave and sub-mm space missions will employ large arrays of multiplexed Transition Edge Sensor (TES) bolometers. Such instruments must contend with the high flux of cosmic rays beyond our atmosphere that induce "glitches" in bolometer data, which posed a challenge to data analysis from the Planck bolometers. Future instruments will face the additional challenges of shared substrate wafers…
▽ More
Future mm-wave and sub-mm space missions will employ large arrays of multiplexed Transition Edge Sensor (TES) bolometers. Such instruments must contend with the high flux of cosmic rays beyond our atmosphere that induce "glitches" in bolometer data, which posed a challenge to data analysis from the Planck bolometers. Future instruments will face the additional challenges of shared substrate wafers and multiplexed readout wiring. In this work we explore the susceptibility of modern TES arrays to the cosmic ray environment of space using two data sets: the 2015 long-duration balloon flight of the SPIDER cosmic microwave background polarimeter, and a laboratory exposure of SPIDER flight hardware to radioactive sources. We find manageable glitch rates and short glitch durations, leading to minimal effect on SPIDER analysis. We constrain energy propagation within the substrate through a study of multi-detector coincidences, and give a preliminary look at pulse shapes in laboratory data.
△ Less
Submitted 13 February, 2020;
originally announced February 2020.
-
Chip-compatible quantum plasmonic launcher
Authors:
Chin-Cheng Chiang,
Simeon I. Bogdanov,
Oksana A. Makarova,
Xiaohui Xu,
Soham Saha,
Deesha Shah,
Di Wang,
Alexei S. Lagutchev,
Alexander V. Kildishev,
Alexandra Boltasseva,
Vladimir M. Shalaev
Abstract:
Integrated on-demand single-photon sources are critical for the implementation of photonic quantum information processing systems. To enable practical quantum photonic devices, the emission rates of solid-state quantum emitters need to be substantially enhanced and the emitted signal must be directly coupled to an on-chip circuitry. The photon emission rate speed-up is best achieved via coupling t…
▽ More
Integrated on-demand single-photon sources are critical for the implementation of photonic quantum information processing systems. To enable practical quantum photonic devices, the emission rates of solid-state quantum emitters need to be substantially enhanced and the emitted signal must be directly coupled to an on-chip circuitry. The photon emission rate speed-up is best achieved via coupling to plasmonic antennas, while on-chip integration can be easily obtained by directly coupling emitters to photonic waveguides. The realization of practical devices requires that both the emission speed-up and efficient out-couping are achieved in a single architecture. Here, we propose a novel platform that effectively combines on-chip compatibility with high radiative emission rates, a quantum plasmonic launcher. The proposed launchers contain single nitrogen-vacancy (NV) centers in nanodiamonds as quantum emitters that offer record-high average fluorescence lifetime shortening factors of about 7000 times. Nanodiamonds with single NV are sandwiched between two silver films that couple more than half of the emission into in-plane propagating surface plasmon polaritons. This simple, compact, and scalable architecture represents a crucial step towards the practical realization of high-speed on-chip quantum networks.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Deterministic integration of single nitrogen-vacancy centers into nanopatch antennas
Authors:
Simeon I. Bogdanov,
Oksana A. Makarova,
Alexei S. Lagutchev,
Deesha Shah,
Chin-Cheng Chiang,
Soham Saha,
Alexandr S. Baburin,
Ilya A. Ryzhikov,
Ilya A. Rodionov,
Alexander V. Kildishev,
Alexandra Boltasseva,
Vladimir M. Shalaev
Abstract:
Quantum emitters coupled to plasmonic nanoantennas produce single photons at unprecedentedly high rates in ambient conditions. This enhancement of quantum emitters' radiation rate is based on the existence of optical modes with highly sub-diffraction volumes supported by plasmonic gap nanoantennas. Nanoantennas with gap sizes on the order of few nanometers have been typically produced using variou…
▽ More
Quantum emitters coupled to plasmonic nanoantennas produce single photons at unprecedentedly high rates in ambient conditions. This enhancement of quantum emitters' radiation rate is based on the existence of optical modes with highly sub-diffraction volumes supported by plasmonic gap nanoantennas. Nanoantennas with gap sizes on the order of few nanometers have been typically produced using various self-assembly or random assembly techniques. Yet, the difficulty of controllably fabricate nanoantennas with the smallest mode sizes coupled to pre-characterized single emitters until now has remained a serious issue plaguing the development of quantum plasmonic devices. We demonstrate the transfer of nanodiamonds with single nitrogen-vacancy (NV) centers to an epitaxial silver substrate and their subsequent deterministic coupling to plasmonic gap nanoantennas. Through fine control of the assembled nanoantenna geometry, a dramatic shortening of the NV fluorescence lifetime was achieved. We furthermore show that by preselecting NV centers exhibiting a photostable spin contrast, a coherent spin dynamics can be measured in the coupled configuration. The demonstrated approach opens unique applications of plasmon-enhanced quantum emitters for integrated quantum information and sensing devices.
△ Less
Submitted 15 February, 2019;
originally announced February 2019.
-
Ultrabright room-temperature single-photon emission from nanodiamond nitrogen-vacancy centers with sub-nanosecond excited-state lifetime
Authors:
Simeon Bogdanov,
Mikhail Y. Shalaginov,
Alexei Lagutchev,
Chin-Cheng Chiang,
Deesha Shah,
Alexander S. Baburin,
Ilya A. Ryzhikov,
Ilya A. Rodionov,
Alexandra Boltasseva,
Vladimir M. Shalaev
Abstract:
Ultrafast emission rates obtained from quantum emitters coupled to plasmonic nanoantennas have recently opened fundamentally new possibilities in quantum information and sensing applications. Plasmonic nanoantennas greatly improve the brightness of quantum emitters by dramatically shortening their fluorescence lifetimes. Gap plasmonic nanocavities that support strongly confined modes are of partic…
▽ More
Ultrafast emission rates obtained from quantum emitters coupled to plasmonic nanoantennas have recently opened fundamentally new possibilities in quantum information and sensing applications. Plasmonic nanoantennas greatly improve the brightness of quantum emitters by dramatically shortening their fluorescence lifetimes. Gap plasmonic nanocavities that support strongly confined modes are of particular interest for such applications. We demonstrate single-photon emission from nitrogen-vacancy (NV) centers in nanodiamonds coupled to nanosized gap plasmonic cavities with internal mode volumes about 10 000 times smaller than the cubic vacuum wavelength. The resulting structures features sub-nanosecond NV excited-state lifetimes and detected photon rates up to 50 million counts per second. Analysis of the fluorescence saturation allows the extraction of the multi-order excitation rate enhancement provided by the nanoantenna. Efficiency analysis shows that the NV center is producing up to 0.25 billion photons per second in the far-field.
△ Less
Submitted 1 December, 2017; v1 submitted 26 November, 2017;
originally announced November 2017.
-
280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter
Authors:
A. S. Bergman,
P. A. R. Ade,
S. Akers,
M. Amiri,
J. A. Austermann,
J. A. Beall,
D. T. Becker,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
R. S Domagalski,
O. Doré,
S. M. Duff,
A. J. Duivenvoorden,
H. K. Eriksen,
M. Farhang,
J. P. Filippini,
L. M. Fissel,
A. A. Fraisse,
K. Freese,
M. Galloway,
A. E. Gambrel
, et al. (54 additional authors not shown)
Abstract:
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mod…
▽ More
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018.
△ Less
Submitted 22 November, 2017; v1 submitted 11 November, 2017;
originally announced November 2017.
-
A One-Step Model of Photoemission from Single Crystal Surfaces
Authors:
Siddharth Karkare,
Weishi Wan,
Jun Feng,
Tai C. Chiang,
Howard A. Padmore
Abstract:
In this paper, we present a 3-D one step photoemission model that can be used to calculate the quantum efficiency and momentum distributions of electrons photoemitted from ordered single crystal surfaces close to the photoemission threshold. Using Ag(111) as an example, we show that the model can not only calculate the quantum efficiency from the surface state accurately without using any ad hoc p…
▽ More
In this paper, we present a 3-D one step photoemission model that can be used to calculate the quantum efficiency and momentum distributions of electrons photoemitted from ordered single crystal surfaces close to the photoemission threshold. Using Ag(111) as an example, we show that the model can not only calculate the quantum efficiency from the surface state accurately without using any ad hoc parameters, but also provides a theoretical quantitative explanation of the vectorial photoelectric effect. This model in conjunction with other band structure and wave function calculation techniques can be effectively used to screen single crystal photoemitters for use as electron sources for particle accelerator and ultrafast electron diffraction applications.
△ Less
Submitted 22 December, 2016;
originally announced December 2016.
-
The Thermal Design, Characterization, and Performance of the SPIDER Long-Duration Balloon Cryostat
Authors:
J. E. Gudmundsson,
P. A. R. Ade,
M. Amiri,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
B. P. Crill,
O. Doré,
J. P. Filippini,
A. A. Fraisse,
A. Gambrel,
N. N. Gandilo,
M. Hasselfield,
M. Halpern,
G. C. Hilton,
W. Holmes,
V. V. Hristov,
K. D. Irwin,
W. C. Jones,
Z. Kermish,
C. J. MacTavish,
P. V. Mason
, et al. (18 additional authors not shown)
Abstract:
We describe the SPIDER flight cryostat, which is designed to cool six millimeter-wavelength telescopes during an Antarctic long-duration balloon flight. The cryostat, one of the largest to have flown on a stratospheric payload, uses liquid helium-4 to deliver cooling power to stages at 4.2 and 1.6 K. Stainless steel capillaries facilitate a high flow impedance connection between the main liquid he…
▽ More
We describe the SPIDER flight cryostat, which is designed to cool six millimeter-wavelength telescopes during an Antarctic long-duration balloon flight. The cryostat, one of the largest to have flown on a stratospheric payload, uses liquid helium-4 to deliver cooling power to stages at 4.2 and 1.6 K. Stainless steel capillaries facilitate a high flow impedance connection between the main liquid helium tank and a smaller superfluid tank, allowing the latter to operate at 1.6 K as long as there is liquid in the 4.2 K main tank. Each telescope houses a closed cycle helium-3 adsorption refrigerator that further cools the focal planes down to 300 mK. Liquid helium vapor from the main tank is routed through heat exchangers that cool radiation shields, providing negative thermal feedback. The system performed successfully during a 17 day flight in the 2014-2015 Antarctic summer. The cryostat had a total hold time of 16.8 days, with 15.9 days occurring during flight.
△ Less
Submitted 11 September, 2015; v1 submitted 23 June, 2015;
originally announced June 2015.
-
Numerical study of plume patterns in the chemotaxis-diffusion-convection coupling system
Authors:
Yannick Deleuze,
Chen-Yu Chiang,
Marc Thiriet,
Tony W. H. Sheu
Abstract:
A chemotaxis-diffusion-convection coupling system for describing a form of buoyant convection in which the fluid develops convection cells and plume patterns will be investigated numerically in this study. Based on the two-dimensional convective chemotaxis-fluid model proposed in the literature, we developed an upwind finite element method to investigate the pattern formation and the hydrodynamica…
▽ More
A chemotaxis-diffusion-convection coupling system for describing a form of buoyant convection in which the fluid develops convection cells and plume patterns will be investigated numerically in this study. Based on the two-dimensional convective chemotaxis-fluid model proposed in the literature, we developed an upwind finite element method to investigate the pattern formation and the hydrodynamical stability of the system. The numerical simulations illustrate different predicted physical regimes in the system. In the convective regime, the predicted plumes resemble Bénard instabilities. Our numerical results show how structured layers of bacteria are formed before bacterium rich plumes fall in the fluid. The plumes have a well defined spectrum of wavelengths and have an exponential growth rate, yet their position can only be predicted in very simple examples. In the chemotactic and diffusive regimes, the effects of chemotaxis are investigated. Our results indicate that the chemotaxis can stabilize the overall system. A time scale analysis has been performed to demonstrate that the critical taxis Rayleigh number for which instabilities set in depends on the chemotaxis head and sensitivity. In addition, the comparison of the differential systems of chemotaxis-diffusion-convection, double diffusive convection, and Rayleigh-Bénard convection establishes a set of evidences that even if the physical mechanisms are different at the same time the dimensionless systems are strongly related to each other.
△ Less
Submitted 25 December, 2014;
originally announced February 2015.
-
The Synchrotron Motion Simulator for Adiabatic Capture Study in the TLS Booster
Authors:
Cheng-Chin Chiang
Abstract:
The synchrotron motion simulator is invented to simulate the longitudinal motion for particles under RF (Radio Frequency) voltage field in a ring accelerator. It is especially used to study the efficiency of adiabatic capture for a booster ring. The purpose of adiabatic capture is to optimize RF voltage settings during the ramping of beam energy and obtain the greatest efficiency of particle captu…
▽ More
The synchrotron motion simulator is invented to simulate the longitudinal motion for particles under RF (Radio Frequency) voltage field in a ring accelerator. It is especially used to study the efficiency of adiabatic capture for a booster ring. The purpose of adiabatic capture is to optimize RF voltage settings during the ramping of beam energy and obtain the greatest efficiency of particle capture. In this paper we study the longitudinal (synchrotron) motion for particles in the TLS (Taiwan Light Source) booster. We compare the properties of TLS booster as a proton or electron accelerator, using the same ramping scenario of beam energy, and optimize the RF voltage settings to have the best capture efficiency.
△ Less
Submitted 22 August, 2014;
originally announced August 2014.
-
Design and construction of a carbon fiber gondola for the SPIDER balloon-borne telescope
Authors:
J. D. Soler,
P. A. R. Ade,
M. Amiri,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
C. Chiang,
C. C. Contaldi,
B. P. Crill,
O. P. Doré,
M. Farhang,
J. P. Filippini,
L. M. Fissel,
A. A. Fraisse,
A. E. Gambrel,
N. N. Gandilo,
S. Golwala,
J. E. Gudmundsson,
M. Halpern,
M. Hasselfield,
G. C. Hilton,
W. A. Holmes,
V. V. Hristov,
K. D. Irwin
, et al. (22 additional authors not shown)
Abstract:
We introduce the light-weight carbon fiber and aluminum gondola designed for the SPIDER balloon-borne telescope. SPIDER is designed to measure the polarization of the Cosmic Microwave Background radiation with unprecedented sensitivity and control of systematics in search of the imprint of inflation: a period of exponential expansion in the early Universe. The requirements of this balloon-borne in…
▽ More
We introduce the light-weight carbon fiber and aluminum gondola designed for the SPIDER balloon-borne telescope. SPIDER is designed to measure the polarization of the Cosmic Microwave Background radiation with unprecedented sensitivity and control of systematics in search of the imprint of inflation: a period of exponential expansion in the early Universe. The requirements of this balloon-borne instrument put tight constrains on the mass budget of the payload. The SPIDER gondola is designed to house the experiment and guarantee its operational and structural integrity during its balloon-borne flight, while using less than 10% of the total mass of the payload. We present a construction method for the gondola based on carbon fiber reinforced polymer tubes with aluminum inserts and aluminum multi-tube joints. We describe the validation of the model through Finite Element Analysis and mechanical tests.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Thermal architecture for the SPIDER flight cryostat
Authors:
J. E. Gudmundsson,
P. A. R. Ade,
M. Amiri,
S. J. Benton,
R. Bihary,
J. J. Bock,
J. R. Bond,
J. A. Bonetti,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
B. P. Crill,
D. O'Dea,
M. Farhang,
J. P. Filippini,
L. M. Fissel,
N. N. Gandilo,
S. R. Golwala,
M. Halpern,
M. Hasselfield,
K. R. Helson,
G. Hilton,
W. Holmes,
V. V. Hristov,
K. D. Irwin
, et al. (18 additional authors not shown)
Abstract:
We describe the cryogenic system for SPIDER, a balloon-borne microwave polarimeter that will map 8% of the sky with degree-scale angular resolution. The system consists of a 1284 L liquid helium cryostat and a 16 L capillary-filled superfluid helium tank, which provide base operating temperatures of 4 K and 1.5 K, respectively. Closed-cycle helium-3 adsorption refrigerators supply sub-Kelvin cooli…
▽ More
We describe the cryogenic system for SPIDER, a balloon-borne microwave polarimeter that will map 8% of the sky with degree-scale angular resolution. The system consists of a 1284 L liquid helium cryostat and a 16 L capillary-filled superfluid helium tank, which provide base operating temperatures of 4 K and 1.5 K, respectively. Closed-cycle helium-3 adsorption refrigerators supply sub-Kelvin cooling power to multiple focal planes, which are housed in monochromatic telescope inserts. The main helium tank is suspended inside the vacuum vessel with thermally insulating fiberglass flexures, and shielded from thermal radiation by a combination of two vapor cooled shields and multi-layer insulation. This system allows for an extremely low instrumental background and a hold time in excess of 25 days. The total mass of the cryogenic system, including cryogens, is approximately 1000 kg. This enables conventional long duration balloon flights. We will discuss the design, thermal analysis, and qualification of the cryogenic system.
△ Less
Submitted 13 June, 2011;
originally announced June 2011.
-
Influences of source displacement on the features of subwavelength imaging of a photonic crystal slab
Authors:
Pi-Gang Luan,
Chen-Yu Chiang,
Hsiao-Yu Yeh
Abstract:
In this paper we study the characteristics of subwavelength imaging of a photonic crystal (PhC) superlens under the influence of source displacement. For square- and triangular-lattice photonic crystal lenses, we investigate the influence of changing the lateral position of a single point source on the imaging uniformity and stability. We also study the effect of changing the geometrical center of…
▽ More
In this paper we study the characteristics of subwavelength imaging of a photonic crystal (PhC) superlens under the influence of source displacement. For square- and triangular-lattice photonic crystal lenses, we investigate the influence of changing the lateral position of a single point source on the imaging uniformity and stability. We also study the effect of changing the geometrical center of a pair of sources on the resolution of the double-image. Both properties are found to be sensitive to the displacement, which implies that a PhC slab cannot be treated seriously as a flat lens. We also show that by introducing material absorption into the dielectric cylinders of the PhC slab and widening the lateral width of the slab, the imaging uniformity and stability can be substantially improved. This study helps us to clarify the underlying mechanisms of some recently found phenomena concerning imaging instability.
△ Less
Submitted 7 December, 2010; v1 submitted 5 December, 2010;
originally announced December 2010.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Quantum Algorithm for Preparing Thermal Gibbs States - Detailed Analysis
Authors:
Chen-Fu Chiang,
Pawel Wocjan
Abstract:
In a recent work [10], Poulin and one of us presented a quantum algorithm for preparing thermal Gibbs states of interacting quantum systems. This algorithm is based on Grovers's technique for quantum state engineering, and its running time is dominated by the factor D/Z(β), where D and Z(β) denote the dimension of the quantum system and its partition function at inverse temperature β, respective…
▽ More
In a recent work [10], Poulin and one of us presented a quantum algorithm for preparing thermal Gibbs states of interacting quantum systems. This algorithm is based on Grovers's technique for quantum state engineering, and its running time is dominated by the factor D/Z(β), where D and Z(β) denote the dimension of the quantum system and its partition function at inverse temperature β, respectively.
We present here a modified algorithm and a more detailed analysis of the errors that arise due to imperfect simulation of Hamiltonian time evolutions and limited performance of phase estimation (finite accuracy and nonzero probability of failure). This modfication together with the tighter analysis allows us to prove a better running time by the effect of these sources of error on the overall complexity. We think that the ideas underlying of our new analysis could also be used to prove a better performance of quantum Metropolis sampling by Temme et al. [12].
△ Less
Submitted 15 February, 2010; v1 submitted 7 January, 2010;
originally announced January 2010.
-
Imaging an off-plane shear wave source with two-dimensional phononic-crystal lens
Authors:
Chen-Yu Chiang,
Pi-Gang Luan
Abstract:
A two dimensional flat phononic crystal (PC) lens for focusing off-plane shear waves is proposed. The lens consists of a triangular lattice hole-array, embedded in solid matrix. Self-collimation effect is employed to guide the shear waves propagating through the lens along specific directions. Dirichlet-to-Neumann Maps (DtN) method is employed to calculate the band structure of the PC, which can…
▽ More
A two dimensional flat phononic crystal (PC) lens for focusing off-plane shear waves is proposed. The lens consists of a triangular lattice hole-array, embedded in solid matrix. Self-collimation effect is employed to guide the shear waves propagating through the lens along specific directions. Dirichlet-to-Neumann Maps (DtN) method is employed to calculate the band structure of the PC, which can avoid the problems of bad convergence and fake bands automatically in the void-solid PC structure. When the lens is illuminated by the off-plane shear waves emanating from a point source, a subwavelength image appears in the far-field zone. The imaging characteristics are investigated by calculating the displacement fields explicitly using the multiple-scattering method, and the results are in good agreement with the ray-trace predictions. Our results may provide insights for designing new phononic devices.
△ Less
Submitted 2 January, 2010;
originally announced January 2010.
-
Continuous-wave, singly resonant OPO at 3 μm
Authors:
S. T. Lin,
Y. Y. Lin,
Y. C. Huang,
A. C. Chiang,
J. T. Shy
Abstract:
We report a continuous-wave, singly resonant optical parametric oscillator (SRO) at 3.3 μm by using a MgO:PPLN crystal as the gain medium and a Yb-fiber laser at 1.064 μm as the pump source. At 25-W pump power, the SRO generated 7.4 and 0.2-W powers at 1.57 and 3.3 μm, respectively. The 3.3-μm SRO has a single-longitudinal-mode output with a ~5-MHz linewidth. We observed thermally induced optica…
▽ More
We report a continuous-wave, singly resonant optical parametric oscillator (SRO) at 3.3 μm by using a MgO:PPLN crystal as the gain medium and a Yb-fiber laser at 1.064 μm as the pump source. At 25-W pump power, the SRO generated 7.4 and 0.2-W powers at 1.57 and 3.3 μm, respectively. The 3.3-μm SRO has a single-longitudinal-mode output with a ~5-MHz linewidth. We observed thermally induced optical bistability in the SRO due to the slight absorption of the 3.3-μm wave in the MgO:PPLN crystal. Pump depletion was clamped at 60% while spectral hole burning was observed in the depleted pump.
△ Less
Submitted 14 March, 2008;
originally announced March 2008.
