-
Linear stability analysis of compressible boundary layer over an insulated wall: Existence of multiple new unstable modes for Mach number beyond 3
Authors:
Neha Chaturvedi,
Swagata Bhaumik,
Rituparn Somvanshi
Abstract:
Here, we investigate the linear spatial stability of a parallel two-dimensional compressible boundary layer on an adiabatic plate by considering 2D and 3D disturbances. We employ the Compound Matrix Method for the first time for compressible flows, which, unlike other conventional techniques, can efficiently eliminate the stiffness of the original equation. Our study explores flow Mach numbers ran…
▽ More
Here, we investigate the linear spatial stability of a parallel two-dimensional compressible boundary layer on an adiabatic plate by considering 2D and 3D disturbances. We employ the Compound Matrix Method for the first time for compressible flows, which, unlike other conventional techniques, can efficiently eliminate the stiffness of the original equation. Our study explores flow Mach numbers ranging from low subsonic to supersonic cases, to investigate the effects of flow compressibility and spanwise variation of disturbances. We get some interesting results depending on the flow Mach number. Mack (AGARD Report No. 709, 1984) reported the existence of two unstable modes for Mach number greater than 3 from viscous calculations (the so-called second mode) that subsequently fuse to create only one unstable zone when Mach number increases. Our calculations show a series of unstable modes for a Mach number greater than 3. The number of such modes is much more than two (unlike what Mack reports). The number and the frequency extent of the corresponding unstable zones increase with an increase in M, which is significantly higher than subsonic or low-supersonic cases. While the shape of the neutral curves for the second unstable mode for a Mach number greater than 4 is similar to the fused neutral curve shown by Mack for a Mach number of 4.8, the characteristics of higher-order spatially unstable modes considering the viscous stability of supersonic boundary layers remain unreported to the best of our knowledge. The last one is the most novel element in the reported results.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Simulations of Radiatively Cooled Magnetic Reconnection Driven by Pulsed Power
Authors:
Rishabh Datta,
Aidan J. Crilly,
Jeremy P. Chittenden,
Simran Chowdhry,
Katherine Chandler,
Nikita Chaturvedi,
Clayton E. Myers,
William R. Fox,
Stephanie B. Hansen,
Christopher A. Jennings,
Hantao Ji,
Carolyn C. Kuranz,
Sergey V. Lebedev,
Dmitri A. Uzdensky,
Jack D. Hare
Abstract:
Magnetic reconnection is an important process in astrophysical environments, as it re-configures magnetic field topology and converts magnetic energy into thermal and kinetic energy. In extreme astrophysical systems, such as black hole coronae and pulsar magnetospheres, radiative cooling modifies the energy partition by radiating away internal energy, which can lead to the radiative collapse of th…
▽ More
Magnetic reconnection is an important process in astrophysical environments, as it re-configures magnetic field topology and converts magnetic energy into thermal and kinetic energy. In extreme astrophysical systems, such as black hole coronae and pulsar magnetospheres, radiative cooling modifies the energy partition by radiating away internal energy, which can lead to the radiative collapse of the layer. In this paper, we perform 2D & 3D simulations to model the MARZ (Magnetic Reconnection on Z) experiments, which are designed to access cooling rates in the laboratory necessary to investigate reconnection in a previously unexplored radiatively-cooled regime. These simulations are performed in GORGON, an Eulerian resistive magnetohydrodynamic code, which models the experimental geometry comprising two exploding wire arrays driven by 20 MA of current on the Z machine (Sandia National Laboratories). Radiative losses are implemented using non-local thermodynamic equilibrium tables computed using the atomic code Spk, and we probe the effects of radiation transport by implementing both a local radiation loss model and P$_{1/3}$ multi-group radiation transport. The load produces highly collisional, super-Alfvénic $(M_{A} \approx 1.5)$, supersonic $(M_S \approx 4-5)$ plasma flows which generate a reconnection layer ($L/δ \approx 100, S_L \approx 400$). The reconnection layer undergoes radiative collapse when the radiative losses exceed Ohmic and compressional heating $τ_{cool}^{-1}/τ_A^{-1} \approx 100$; this generates a cold strongly compressed current sheet, leading to an accelerated reconnection rate, consistent with theoretical predictions. Finally, the current sheet is unstable to the plasmoid instability, but the magnetic islands are extinguished by strong radiative cooling before ejection from the layer.
△ Less
Submitted 3 January, 2024;
originally announced January 2024.
-
Semi-supervised physics guided deep learning framework for predicting the I-V characteristics of GAN HEMT
Authors:
Shivanshu Mishra,
Bipin Gaikwad,
Nidhi Chaturvedi
Abstract:
This letter proposes a novel deep learning framework (DLF) that addresses two major hurdles in the adoption of deep learning techniques for solving physics-based problems: 1) requirement of the large dataset for training the DL model, 2) consistency of the DL model with the physics of the phenomenon. The framework is generic in nature and can be applied to model a phenomenon from other fields of r…
▽ More
This letter proposes a novel deep learning framework (DLF) that addresses two major hurdles in the adoption of deep learning techniques for solving physics-based problems: 1) requirement of the large dataset for training the DL model, 2) consistency of the DL model with the physics of the phenomenon. The framework is generic in nature and can be applied to model a phenomenon from other fields of research too as long as its behaviour is known. To demonstrate the technique, a semi-supervised physics guided neural network (SPGNN) has been developed that predicts I-V characteristics of a gallium nitride-based high electron mobility transistor (GaN HEMT). A two-stage training method is proposed, where in the first stage, the DL model is trained via the unsupervised learning method using the I-V equations of a field-effect transistor as a loss function of the model that incorporates physical behaviors in the DL model and in the second stage, the DL model has been fine-tuned with a very small set of experimental data. The SPGNN significantly reduces the requirement of the training data by more than 80% for achieving similar or better performance than a traditional neural network (TNN) even for unseen conditions. The SPGNN predicts 32.4% of the unseen test data with less than 1% of error and only 0.4% of the unseen test data with more than 10% of error.
△ Less
Submitted 22 October, 2021; v1 submitted 20 October, 2021;
originally announced October 2021.
-
A preliminary assessment of the sensitivity of uniaxially-driven fusion targets to flux-limited thermal conduction modeling
Authors:
D. A. Chapman,
J. D. Pecover,
N. Chaturvedi,
N. Niasse,
M. P. Read,
D. H. Vassilev,
J. P. Chittenden,
N. Hawker,
N. Joiner
Abstract:
The role of flux-limited thermal conduction on the fusion performance of the uniaxially-driven targets studied by Derentowicz et al.; Jour. Tech. Phys. 18, 465 (1977) and Jour. Tech. Phys. 25, 135 (1977), is explored as part of a wider effort to understand and quantify uncertainties in ICF systems sharing similarities with First Light Fusion's projectile-driven concept. We examine the role of unce…
▽ More
The role of flux-limited thermal conduction on the fusion performance of the uniaxially-driven targets studied by Derentowicz et al.; Jour. Tech. Phys. 18, 465 (1977) and Jour. Tech. Phys. 25, 135 (1977), is explored as part of a wider effort to understand and quantify uncertainties in ICF systems sharing similarities with First Light Fusion's projectile-driven concept. We examine the role of uncertainties in plasma microphysics and different choices for the numerical implementation of the conduction operator on simple metrics encapsulating the target performance. The results indicate that choices which affect the description of ionic heat flow between the heated fusion fuel and the gold anvil used to contain it are the most important. The electronic contribution is found to be robustly described by local diffusion. The sensitivities found suggest a prevalent role for quasi-nonlocal ionic transport, especially in the treatment of conduction across material interfaces with strong gradients in temperature and conductivity. We note that none of the simulations produce neutron yields which substantiate those reported by Derentowicz et al. Jour. Tech. Phys. 25, 135 (1977), leaving open future studies aimed at more fully understanding this class of ICF systems.
△ Less
Submitted 8 June, 2021; v1 submitted 18 February, 2021;
originally announced February 2021.
