Showing 1–13 of 13 results for author: Chai, S

Residual Stress-Driven Non-Euclidean Morphing in Origami Structures

Authors: Zihe Liang, Sibo Chai, Qinyun Ding, Kai Xiao, Ke Liu, Jiayao Ma, Jaehyung Ju

Abstract: Non-Euclidean surfaces are ubiquitous in numerous engineering fields, such as automotive, aerospace, and biomedical engineering domains. Morphing origami has numerous potential engineering applications, including soft robots, mechanical metamaterials, antennas, aerospace structures, and biomedical devices, owing to its intrinsic morphing features from two-dimensional (2D) planes to three-dimension… ▽ More Non-Euclidean surfaces are ubiquitous in numerous engineering fields, such as automotive, aerospace, and biomedical engineering domains. Morphing origami has numerous potential engineering applications, including soft robots, mechanical metamaterials, antennas, aerospace structures, and biomedical devices, owing to its intrinsic morphing features from two-dimensional (2D) planes to three-dimensional (3D) surfaces. However, the current one-dimensional (1D) hinge deformation-driven transformation of foldable origami with rigid or slightly deformable panels cannot achieve a 3D complex and large curvilinear morphing. Moreover, most active origami structures use thin hinges with soft materials on their creases, thus resulting in a lower load capability. This study proposes a novel origami morphing method that demonstrates large free-form surface morphing, e.g., Euclidean to non-Euclidean surface morphing with shape-locking. We embedded tensorial anisotropic stress in origami panels during the extrusion-based 3D printing of shape memory polymers. The extrusion-based 3D printing of isotropic shape memory polymers can produce tensorial anisotropic stress in origami panels during fabrication, which can realize large non-Euclidean surface morphing with multiple deformation modes. The connecting topology of the origami unit cells influences the global morphing behavior owing to the interaction of the deformation of adjacent panels. Non-Euclidean morphing integrated with four-dimensional (4D) printing can provide multimodal shape locking at material and structural levels. The non-Euclidean surface morphing caused by tensorial residual stress in the panel during 3D printing expands the design space of origami and kirigami structures. △ Less

Submitted 11 December, 2023; originally announced December 2023.

A Cryogenic Tune and Match Circuit for Magnetic Resonance Microscopy at 15.2T

Authors: Benjamin M. Hardy, Gary Drake, Shuyang Chai, Bibek Dhakal, Jonathan B. Martin, Junzhong Xu, Mark D. Does, Adam W. Anderson, Xinqiang Yan, John C. Gore

Abstract: Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common… ▽ More Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common in high field systems but proves difficult to insulate the sample from extreme temperatures. We designed a chamber to cool only the tune and match circuitry to show it is possible to achieve much of the available SNR gain available for cooled coils. We designed a microcoil circuit to resonate at 650 MHz for imaging on a 15.2 T scanner. Surface loops and solenoids of varying diameters were tested to determine the largest diameter coil that demonstrated significant SNR gains from cooling. A liquid N2 cryochamber was designed to cool the circuitry while leaving the RF coil in ambient air. As the cryochamber was filled with liquid N2, Q-factors were measured on the bench while monitoring the coil's surface temperature. Improvements of SNR on images of solutions were demonstrated via cooling the tune and match circuit in the magnet bore. At 650 MHz, loops and solenoids < 3 mm in diameter showed significant improvements in quality factor on the bench. The resistance of the variable capacitors and the coaxial cable were measured to be 45% and 32% of room temperature values near the Larmor frequency. Images obtained with a 2 turn, 3 mm diameter loop with the matching circuit at room temperature and then cooled with liquid nitrogen demonstrated SNR improvements of a factor of 2. By cooling the tune and match circuit and leaving the surface loop in ambient air, SNR was improved by a factor of 2. The results are significant because it allows for more space to insulate the sample from extreme temperatures. △ Less

Submitted 24 August, 2023; originally announced August 2023.

Comments: 33 pages, 10 figures, 1 table, 4 supplemental figures, 1 supplemental table

Towards Sustainable Ultrawide Bandgap Van der Waals Materials: An ab initio Screening Effort

Authors: Chuin Wei Tan, Linqiang Xu, Chen Chen Er, Siang-Piao Chai, Boris Kozinsky, Hui Ying Yang, Shengyuan A. Yang, Jing Lu, Yee Sin Ang

Abstract: The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are un… ▽ More The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are under threat of depletion and pose elevated risks to the environment. The role of material-level sustainability in computational screening efforts remains an open question thus far. Here we develop a general van der Waals materials screening framework imbued with sustainability-motivated search criteria. Using ultrawide bandgap (UWBG) materials as a backdrop -- an emerging materials class with great prospects in dielectric, power electronics, and ultraviolet device applications, we demonstrate how this screening framework results in 25 sustainable UWBG layered materials comprising only of low-risks elements. Our findings constitute a critical first-step towards reinventing a more sustainable electronics landscape beyond silicon, with the framework established in this work serving as a harbinger of sustainable 2D materials discovery. △ Less

Submitted 25 October, 2023; v1 submitted 26 June, 2023; originally announced June 2023.

Comments: 17 pages, 8 figures

Enhancing fiber atom interferometer by in-fiber laser cooling

Authors: Yu Wang, Shijie Chai, Thomas Billotte, Zilong Chen, Mingjie Xin, Wui Seng Leong, Foued Amrani, Benoit Debord, Fetah Benabid, Shau-Yu Lan

Abstract: We demonstrate an inertia sensitive atom interferometer optically guided inside a 22-cm-long negative curvature hollow-core photonic crystal fiber with an interferometer time of 20 ms. The result prolongs the previous fiber guided atom interferometer time by three orders of magnitude. The improvement arises from the realization of in-fiber Λ-enhanced gray molasses and delta-kick cooling to cool at… ▽ More We demonstrate an inertia sensitive atom interferometer optically guided inside a 22-cm-long negative curvature hollow-core photonic crystal fiber with an interferometer time of 20 ms. The result prolongs the previous fiber guided atom interferometer time by three orders of magnitude. The improvement arises from the realization of in-fiber Λ-enhanced gray molasses and delta-kick cooling to cool atoms from 32 μK to below 1 μK in 4 ms. The in-fiber cooling overcomes the inevitable heating during the atom loading process and allows a shallow guiding optical potential to minimize decoherence. Our results permit bringing atoms close to source fields for sensing and could lead to compact inertial quantum sensors with a sub-millimeter resolution. △ Less

Submitted 19 December, 2021; originally announced December 2021.

Journal ref: Phys. Rev. Research 4, L022058 (2022)

Dark-state sideband cooling in an atomic ensemble

Authors: Chang Huang, Shijie Chai, Shau-Yu Lan

Abstract: We utilize the dark state in a Λ-type three-level system to cool an ensemble of 85Rb atoms in an optical lattice [Morigi et al., Phys. Rev. Lett. 85, 4458 (2000)]. The common suppression of the carrier transition of atoms with different vibrational frequencies allows them to reach a subrecoil temperature of 100 nK after being released from the optical lattice. A nearly zero vibrational quantum num… ▽ More We utilize the dark state in a Λ-type three-level system to cool an ensemble of 85Rb atoms in an optical lattice [Morigi et al., Phys. Rev. Lett. 85, 4458 (2000)]. The common suppression of the carrier transition of atoms with different vibrational frequencies allows them to reach a subrecoil temperature of 100 nK after being released from the optical lattice. A nearly zero vibrational quantum number is determined from the time-of-flight measurements and adiabatic expansion process. The features of sideband cooling are examined in various parameter spaces. Our results show that dark-state sideband cooling is a simple and compelling method for preparing a large ensemble of atoms into their vibrational ground state of a harmonic potential and can be generalized to different species of atoms and molecules for studying ultracold physics that demands recoil temperature and below. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. A 103, 013305 (2021)

Large array of Schrödinger cat states facilitated by an optical waveguide

Authors: Wui Seng Leong, Mingjie Xin, Zilong Chen, Shijie Chai, Yu Wang, Shau-Yu Lan

Abstract: Quantum engineering using photonic structures offer new capabilities for atom-photon interactions for quantum optics and atomic physics, which could eventually lead to integrated quantum devices. Despite the rapid progress in the variety of structures, coherent excitation of the motional states of atoms in a photonic waveguide using guided modes has yet to be demonstrated. Here, we use the wavegui… ▽ More Quantum engineering using photonic structures offer new capabilities for atom-photon interactions for quantum optics and atomic physics, which could eventually lead to integrated quantum devices. Despite the rapid progress in the variety of structures, coherent excitation of the motional states of atoms in a photonic waveguide using guided modes has yet to be demonstrated. Here, we use the waveguide mode of a hollow-core photonic crystal fibre to manipulate the mechanical Fock states of single atoms in a harmonic potential inside the fibre. We create a large array of Schrödinger cat states, a quintessential feature of quantum physics and a key element in quantum information processing and metrology, of approximately 15000 atoms along the fibre by entangling the electronic state with the coherent harmonic oscillator state of each individual atom. Our results provide a useful step for quantum information and simulation with a wide range of photonic waveguide systems. △ Less

Submitted 20 October, 2020; originally announced October 2020.

Journal ref: Nat Commun 11, 5295 (2020)

Beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

Authors: K. Kawagoe, Y. Miura, I. Sekiya, T. Suehara, T. Yoshioka, S. Bilokin, J. Bonis, P. Cornebise, A. Gallas, A. Irles, R. Pöschl, F. Richard, A. Thiebault, D. Zerwas, M. Anduze, V. Balagura, V. Boudry, J-C. Brient, E. Edy, G. Fayolle, M. Frotin, F. Gastaldi, R. Guillaumat, A. Lobanov, M. Louzir , et al. (19 additional authors not shown)

Abstract: The technological prototype of the CALICE highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) was tested in a beam at DESY in 2017. The setup comprised seven layers of silicon sensors. Each layer comprised four sensors, with each sensor containing an array of 256 $5.5\times5.5$ mm$^2$ silicon PIN diodes. The four sensors covered a total area of $18\times18$ cm$^2$, and comprise… ▽ More The technological prototype of the CALICE highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) was tested in a beam at DESY in 2017. The setup comprised seven layers of silicon sensors. Each layer comprised four sensors, with each sensor containing an array of 256 $5.5\times5.5$ mm$^2$ silicon PIN diodes. The four sensors covered a total area of $18\times18$ cm$^2$, and comprised a total of 1024 channels. The readout was split into a trigger line and a charge signal line. Key performance results for signal over noise for the two output lines are presented, together with a study of the uniformity of the detector response. Measurements of the response to electrons for the tungsten loaded version of the detector are also presented. △ Less

Submitted 22 October, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Report number: KYUSHU-RCAPP-2019-04

Commissioning of the highly granular SiW-ECAL technological prototype

Authors: S. Bilokin, J. Bonis, P. Cornebise, A. Gallas, A. Irles, R. Pöschl, F. Richard, A. Thiebault, D. Zerwas, M. Anduze, V. Balagura, V. Boudry, J-C. Brient, E. Edy, G. Fayolle, M. Frotin, F. Gastaldi, A. Lobanov, F. Magniette, J. Nanni, M. Rubio-Roy, K. Shpak, H. Videau, D. Yu, S. Callier , et al. (18 additional authors not shown)

Abstract: In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features detector elements with a channel number similar to that envisaged for e.g. the ILD Detector of the International Linear Collider (ILC). The analysis demonstrates the capability of the detector to record si… ▽ More In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features detector elements with a channel number similar to that envisaged for e.g. the ILD Detector of the International Linear Collider (ILC). The analysis demonstrates the capability of the detector to record signals as low as 0.5 MIP. Further, no loss of performance has been observed when operating the detector in a high magnetic field. △ Less

Submitted 4 April, 2019; v1 submitted 11 October, 2018; originally announced October 2018.

Report number: AIDA-2020-PUB-2019-002

Observation of Toroidal Alfven Eigenmodes during Minor Disruptions in Ohmic Plasmas

Authors: Yangqing Liu, Yi Tan, Zhe Gao, Yuhong Xu, Youjun Hu, Song Chai, Yanzheng Jiang, Rui Ke, Heng Zhong, Wenhao Wang

Abstract: Toroidal Alfven eigenmodes (TAEs) excited in purely ohmically heated plasmas without any auxiliary heating have been identified for the first time in the SUNIST spherical tokamak. The TAE modes are observed during minor disruptions and have a frequency range of 150-500 kHz. The mode structure analysis indicates the existence of both m/n=-3/-1 and -4/-1 harmonics, propagating in the electron diamag… ▽ More Toroidal Alfven eigenmodes (TAEs) excited in purely ohmically heated plasmas without any auxiliary heating have been identified for the first time in the SUNIST spherical tokamak. The TAE modes are observed during minor disruptions and have a frequency range of 150-500 kHz. The mode structure analysis indicates the existence of both m/n=-3/-1 and -4/-1 harmonics, propagating in the electron diamagnetic direction in the laboratory frame of reference. These TAEs appear simultaneously with the generation of runaway electrons in the current quench phase, accompanying with the density sweeping during the minor disruption. Possible driving mechanisms and potential applications of these TAEs are discussed. △ Less

Submitted 13 December, 2016; originally announced December 2016.

Comments: 10 pages, 4 figures, accepted by Physics of Plasmas

Intelligent Low-level RF System by Non-destructive Beam Monitoring Device for Cyclotrons

Authors: M. S. Sharifi Asadi Malafeh, M. Ghergherehchi, H. Afarideh, J. S. Chai

Abstract: The project of a10MeV PET cyclotron accelerator for medical diagnosis and treatment was started at Amirkabir University of Technology in 2012. The low-level RF system of cyclotron accelerator is designed to stabilize acceleration voltage and control the resonance frequency of the cavity. In this work Intelligent Low Level Radio Frequency Circuit or ILLRF suitable for Most of the AVF cyclotron acce… ▽ More The project of a10MeV PET cyclotron accelerator for medical diagnosis and treatment was started at Amirkabir University of Technology in 2012. The low-level RF system of cyclotron accelerator is designed to stabilize acceleration voltage and control the resonance frequency of the cavity. In this work Intelligent Low Level Radio Frequency Circuit or ILLRF suitable for Most of the AVF cyclotron accelerators was designed by the beam monitoring device and narrow band tunable band-pass filter. In this design, for the RF phase detection does not need to signal processing by microcontroller △ Less

Submitted 20 April, 2015; originally announced April 2015.

The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers

Authors: C. Adloff, J. -J. Blaising, M. Chefdeville, C. Drancourt, R. Gaglione, N. Geffroy, Y. Karyotakis, I. Koletsou, J. Prast, G. Vouters J. Repond, J. Schlereth, L. Xia E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, G. Eigen, M. A. Thomson, D. R. Ward, D. Benchekroun, A. Hoummada, Y. Khoulaki J. Apostolakis, S. Arfaoui, M. Benoit , et al. (188 additional authors not shown)

Abstract: The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is m… ▽ More The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is measured on a statistical basis with high spatial and temporal resolution in sampling calorimeters with tungsten and steel absorbers. The results are compared to GEANT4 (version 9.4 patch 03) simulations with different hadronic physics models. These comparisons demonstrate the importance of using high precision treatment of low-energy neutrons for tungsten absorbers, while an overall good agreement between data and simulations for all considered models is observed for steel. △ Less

Submitted 21 July, 2014; v1 submitted 25 April, 2014; originally announced April 2014.

Comments: 24 pages including author list, 9 figures, published in JINST

Report number: MPP-2014-147

Journal ref: JINST 9 (2014) P07022

Simulation of Electron Behavior in PIG Ion Source for 9MeV Cyclotron

Authors: Mitra Ghergherehchi, Xiang- Jie Mu, Yeong- Heum Yeon, Jong-Wan Kim, Jong- Seo Chai

Abstract: In this paper, we focus on a PIG source for producing intense H-ions inside a 9 MeV cyclotron. The properties of the PIG ion source were simulated for a variety of electric field distributions and magnetic field strengths using CST particle studio. After analyzing secondary electron emission (SEE) as a function of both magnetic and electric field strengths, we found that for the modeled PIG geomet… ▽ More In this paper, we focus on a PIG source for producing intense H-ions inside a 9 MeV cyclotron. The properties of the PIG ion source were simulated for a variety of electric field distributions and magnetic field strengths using CST particle studio. After analyzing secondary electron emission (SEE) as a function of both magnetic and electric field strengths, we found that for the modeled PIG geometry a magnetic field strength of 0.2 T provided the best results in terms of the number of secondary electrons. Furthermore, at 0.2 T the number of secondary electrons proved to be greatest regardless of the cathode potential. Also the modified PIG ion source with quartz insulation tubes was tested in KIRAMS-13 cyclotron by varying gas flow rate and arc current, respectively. The capacity of the designed ion source was also demonstrated by producing plasma inside the constructed 9MeV cyclotron. As a result, the ion source is verified to be capable of producing intense H- beam and high ion beam current for the desired 9 MeV cyclotron. The simulation results provide experimental constraints for optimizing the strength of the plasma and final ion beam current at target inside a cyclotron. △ Less

Submitted 2 June, 2014; v1 submitted 29 December, 2013; originally announced December 2013.

Test of CsI(Tl) crystals for the Dark Matter Search

Authors: H. J. Kim, H. J. Ahn, S. K. Kim, E. Won, T. Y. Kim, Y. D. Kim, M. H. Lee, J. S. Chai, J. H. Ha

Abstract: Searches for weakly interacting massive particles(WIMP) can be based on the dete ction of nuclear recoil energy in CsI(Tl) crystals. We demonstrate that low energy gamma rays down to few keV is detected with CsI(Tl) crystal detector. A clear peak at 6 keV is observed using X-ray source. Good energy resolution and linearity have been achieved down to X-ray region. In addition, we also show that a… ▽ More Searches for weakly interacting massive particles(WIMP) can be based on the dete ction of nuclear recoil energy in CsI(Tl) crystals. We demonstrate that low energy gamma rays down to few keV is detected with CsI(Tl) crystal detector. A clear peak at 6 keV is observed using X-ray source. Good energy resolution and linearity have been achieved down to X-ray region. In addition, we also show that alpha particles and gamma rays can be clearly separated using the different time characteristics of the crystal. △ Less

Submitted 28 October, 1999; originally announced October 1999.

Comments: 14 pages(7 figures), Latex, submitted to Nuclear Instruments and Methods A

Report number: SNUHEP-99-1