Showing 1–44 of 44 results for author: Cerutti, F

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

The Muon Collider

Authors: Carlotta Accettura, Simon Adrian, Rohit Agarwal, Claudia Ahdida, Chiara Aime', Avni Aksoy, Gian Luigi Alberghi, Siobhan Alden, Luca Alfonso, Muhammad Ali, Anna Rita Altamura, Nicola Amapane, Kathleen Amm, David Amorim, Paolo Andreetto, Fabio Anulli, Ludovica Aperio Bella, Rob Appleby, Artur Apresyan, Pouya Asadi, Mohammed Attia Mahmoud, Bernhard Auchmann, John Back, Anthony Badea, Kyu Jung Bae , et al. (433 additional authors not shown)

Abstract: Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an… ▽ More Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an electron-positron collider, yielding a physics potential significantly greater than the sum of its individual parts. A high-energy muon collider is the natural next step in the exploration of fundamental physics after the HL-LHC and a natural complement to a future low-energy Higgs factory. Such a facility would significantly broaden the scope of particle colliders, engaging the many frontiers of the high energy community. The last European Strategy for Particle Physics Update and later the Particle Physics Project Prioritisation Panel in the US requested a study of the muon collider, which is being carried on by the International Muon Collider Collaboration. In this comprehensive document we present the physics case, the state of the work on accelerator design and technology, and propose an R\&D project that can make the muon collider a reality. △ Less

Submitted 30 April, 2025; originally announced April 2025.

Comments: 406 pages, supplementary report to the European Strategy for Particle Physics - 2026 update

Towards a new generation of solid total-energy detectors for neutron-capture time-of-flight experiments with intense neutron beams

Authors: J. Balibrea-Correa, V. Babiano-Suarez, J. Lerendegui-Marco, C. Domingo-Pardo, I. Ladarescu, A. Tarifeño-Saldivia, G. de la Fuente-Rosales, B. Gameiro, N. Zaitseva, V. Alcayne, D. Cano-Ott, E. González-Romero, T. Martínez, E. Mendoza, A. Pérez de Rada, J. Plaza del Olmo, A. Sánchez-Caballero, A. Casanovas, F. Calviño, S. Valenta, O. Aberle, S. Altieri, S. Amaducci, J. Andrzejewski, M. Bacak , et al. (112 additional authors not shown)

Abstract: Challenging neutron-capture cross-section measurements of small cross sections and samples with a very limited number of atoms require high-flux time-of-flight facilities. In turn, such facilities need innovative detection setups that are fast, have low sensitivity to neutrons, can quickly recover from the so-called $γ$-flash, and offer the highest possible detection sensitivity. In this paper, we… ▽ More Challenging neutron-capture cross-section measurements of small cross sections and samples with a very limited number of atoms require high-flux time-of-flight facilities. In turn, such facilities need innovative detection setups that are fast, have low sensitivity to neutrons, can quickly recover from the so-called $γ$-flash, and offer the highest possible detection sensitivity. In this paper, we present several steps toward such advanced systems. Specifically, we describe the performance of a high-sensitivity experimental setup at CERN n\_TOF EAR2. It consists of nine sTED detector modules in a compact cylindrical configuration, two conventional used large-volume C$_{6}$D$_{6}$ detectors, and one LaCl$_{3}$(Ce) detector. The performance of these detection systems is compared using $^{93}$Nb($n$,$γ$) data. We also developed a detailed \textsc{Geant4} Monte Carlo model of the experimental EAR2 setup, which allows for a better understanding of the detector features, including their efficiency determination. This Monte Carlo model has been used for further optimization, thus leading to a new conceptual design of a $γ$ detector array, STAR, based on a deuterated-stilbene crystal array. Finally, the suitability of deuterated-stilbene crystals for the future STAR array is investigaged experimentally utilizing a small stilbene-d12 prototype. The results suggest a similar or superior performance of STAR with respect to other setups based on liquid-scintillators, and allow for additional features such as neutron-gamma discrimination and a higher level of customization capability. △ Less

Submitted 28 November, 2024; originally announced November 2024.

MuCol Milestone Report No. 5: Preliminary Parameters

Authors: Carlotta Accettura, Simon Adrian, Rohit Agarwal, Claudia Ahdida, Chiara Aimé, Avni Aksoy, Gian Luigi Alberghi, Siobhan Alden, Luca Alfonso, Nicola Amapane, David Amorim, Paolo Andreetto, Fabio Anulli, Rob Appleby, Artur Apresyan, Pouya Asadi, Mohammed Attia Mahmoud, Bernhard Auchmann, John Back, Anthony Badea, Kyu Jung Bae, E. J. Bahng, Lorenzo Balconi, Fabrice Balli, Laura Bandiera , et al. (369 additional authors not shown)

Abstract: This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power… ▽ More This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power consumption of the facility. The data is collected from a collaborative spreadsheet and transferred to overleaf. △ Less

Submitted 5 November, 2024; originally announced November 2024.

Interim report for the International Muon Collider Collaboration (IMCC)

Authors: C. Accettura, S. Adrian, R. Agarwal, C. Ahdida, C. Aimé, A. Aksoy, G. L. Alberghi, S. Alden, N. Amapane, D. Amorim, P. Andreetto, F. Anulli, R. Appleby, A. Apresyan, P. Asadi, M. Attia Mahmoud, B. Auchmann, J. Back, A. Badea, K. J. Bae, E. J. Bahng, L. Balconi, F. Balli, L. Bandiera, C. Barbagallo , et al. (362 additional authors not shown)

Abstract: The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accele… ▽ More The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider. △ Less

Submitted 28 January, 2025; v1 submitted 17 July, 2024; originally announced July 2024.

Comments: This document summarises the International Muon Collider Collaboration (IMCC) progress and status of the Muon Collider R&D programme

Pushing the high count rate limits of scintillation detectors for challenging neutron-capture experiments

Authors: J. Balibrea Correa, J. Lerendegui-Marco, V. Babiano-Suarez, C. Domingo-Pardo, I. Ladarescu, A. Tarifeño-Saldivia, V. Alcayne, D. Cano-Ott, E. González-Romero, T. Martínez, E. Mendoza, A. Pérez de Rada, J. Plaza del Olmo, A. Sánchez-Caballero, A. Casanovas, F. Calviño, S. Valenta, O. Aberle, S. Altieri, S. Amaducci, J. Andrzejewski, M. Bacak, C. Beltrami, S. Bennett, A. P. Bernardes , et al. (109 additional authors not shown)

Abstract: One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects… ▽ More One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n\_TOF facility, the detectors of choice are the C$_{6}$D$_{6}$ liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n\_TOF 20~m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from $^{197}$Au($n$,$γ$), including the saturated 4.9~eV resonance which is an important component of normalization for neutron cross section measurements. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Energy deposition studies for the Upgrade II of LHCb at the CERN Large Hadron Collider

Authors: Alessia Ciccotelli, Robert B. Appleby, Francesco Cerutti, Kevin Buffet, Francois Butin, Gloria Corti, Luigi Salvatore Esposito, Ruben Garcia Alia, Matthias Karacson, Giuseppe Lerner, Daniel Prelipcean, Maud Wehrle

Abstract: The Upgrade II of the LHCb experiment is proposed to be installed during the CERN Long Shutdown 4, aiming to operate LHCb at 1.5x$10^{34}cm^{-2}s^{-1}$ that is 75 times its design luminosity and reaching an integrated luminosity of about $400 fb^{-1}$ by the end of the High Luminosity LHC era. This increase of the data sample at LHCb is an unprecedented opportunity for heavy flavour physics measur… ▽ More The Upgrade II of the LHCb experiment is proposed to be installed during the CERN Long Shutdown 4, aiming to operate LHCb at 1.5x$10^{34}cm^{-2}s^{-1}$ that is 75 times its design luminosity and reaching an integrated luminosity of about $400 fb^{-1}$ by the end of the High Luminosity LHC era. This increase of the data sample at LHCb is an unprecedented opportunity for heavy flavour physics measurements. A first upgrade of LHCb, completed in 2022, has already implemented important changes of the LHCb detector and, for the Upgrade II, further detector improvements are being considered. Such a luminosity increase will have an impact not only on the LHCb detector but also on the LHC magnets, cryogenics and electronic equipment placed in the IR8. In fact, the LHCb experiment was conceived to work at a much lower luminosity than ATLAS and CMS, implying minor requirements for protection of the LHC elements from the collision debris and therefore a different layout around the interaction point. The luminosity target proposed for the Upgrade II requires to review the layout of the entire insertion region in order to ensure safe operation of the LHC magnets and to mitigate the risk of failure of the electronic devices. The objective of this paper is to provide an overview of the implications of the Upgrade II of LHCb in the experimental cavern and in the tunnel with a focus on the LHCb detector, electronic devices and accelerator magnets. △ Less

Submitted 26 October, 2023; v1 submitted 12 October, 2023; originally announced October 2023.

Power deposition studies for standard and crystal-assisted heavy ion collimation inthe CERN Large Hadron Collider

Authors: J. B. Potoine, R. Bruce, R. Cai, F. Cerutti, M. D'Andrea, L. Esposito, P. D. Hermes, A. Lechner, D. Mirarchi, S. Redaelli, V. Rodin, F. Salvat Pujo, P. Schoofs, A. Waets, F. Wrobel

Abstract: The LHC heavy-ion program with $^{208}$Pb$^{82+}$ beams will benefit from a significant increase of the beam intensity when entering its High-Luminosity era in Run~3 (2023). The stored energy is expected to surpass 20~MJ per beam. The LHC is equipped with a betatron collimation system, which intercepts the transverse beam halo and protects sensitive equipment such as superconducting magnets agains… ▽ More The LHC heavy-ion program with $^{208}$Pb$^{82+}$ beams will benefit from a significant increase of the beam intensity when entering its High-Luminosity era in Run~3 (2023). The stored energy is expected to surpass 20~MJ per beam. The LHC is equipped with a betatron collimation system, which intercepts the transverse beam halo and protects sensitive equipment such as superconducting magnets against beam losses. However, nuclear fragmentation and electromagnetic dissociation of $^{208}$Pb$^{82+}$ ions in collimators generates a flux of secondary fragments, which are lost in downstream dispersion suppressor and arc cells. These secondary ions may pose a performance limitation in upcoming runs since they can induce magnet quenches. In order to mitigate this risk, an alternative collimation technique, relying on bent crystals as primary collimators, will be used in forthcoming heavy-ion runs. In this paper, we study the power deposition in superconducting magnets by means of tracking and \textsc{FLUKA} shower simulations, comparing the standard collimation system against the crystal-based one. In order to quantify the predictive ability of the simulation model, we present absolute benchmarks against beam loss monitor measurements from the 2018 $^{208}$Pb$^{82+}$ run at 6.37~$Z$TeV. The benchmarks cover several hundred meters of beamline, from the primary collimators to the first arc cells. Based on these studies, we provide a detailed analysis of ion fragmentation and leakage to the cold magnets and quantify the expected quench margin in future $^{208}$Pb$^{82+}$ runs. △ Less

Submitted 7 April, 2023; originally announced April 2023.

Comments: 20 pages, 19 figures

Emulator-based Bayesian Inference on Non-Proportional Scintillation Models by Compton-Edge Probing

Authors: David Breitenmoser, Francesco Cerutti, Gernot Butterweck, Malgorzata Magdalena Kasprzak, Sabine Mayer

Abstract: Scintillator detector response modelling has become an essential tool in various research fields such as particle and nuclear physics, astronomy or geophysics. Yet, due to the system complexity and the requirement for accurate electron response measurements, model inference and calibration remains a challenge. Here, we propose Compton edge probing to perform non-proportional scintillation model (N… ▽ More Scintillator detector response modelling has become an essential tool in various research fields such as particle and nuclear physics, astronomy or geophysics. Yet, due to the system complexity and the requirement for accurate electron response measurements, model inference and calibration remains a challenge. Here, we propose Compton edge probing to perform non-proportional scintillation model (NPSM) inference for inorganic scintillators. We use laboratory-based gamma-ray radiation measurements with a NaI(Tl) scintillator to perform Bayesian inference on a NPSM. Further, we apply machine learning to emulate the detector response obtained by Monte Carlo simulations. We show that the proposed methodology successfully constrains the NPSM and hereby quantifies the intrinsic resolution. Moreover, using the trained emulators, we can predict the spectral Compton edge dynamics as a function of the parameterized scintillation mechanisms. The presented framework offers a novel way to infer NPSMs for any inorganic scintillator without the need for additional electron response measurements. △ Less

Submitted 14 August, 2023; v1 submitted 11 February, 2023; originally announced February 2023.

Comments: Revised manuscript based on single-blind peer-review (second round)

Optical Transmission Characterization of Fused Silica Materials Irradiated at the CERN Large Hadron Collider

Authors: S. Yang, A. Tate, R. Longo, M. Sabate Gilarte, F. Cerutti, S. Mazzoni, M. Grosse Perdekamp, E. Bravin, Z. Citron, B. Kühn, F. Nürnberg, B. Cole, J. Fritchie, I. Gelber, M. Hoppesch, S. Jackobsen, T. Koeth, C. Lantz, D. MacLean, A. Mignerey, M. Murray, M. Palm, M. Phipps, S. Popescu, N. Santiago , et al. (1 additional authors not shown)

Abstract: The Target Absorbers for Neutrals (TANs) represent one of the most radioactive regions in the Large Hadron Collider (LHC). Seven 40 cm long fused silica rods with different dopant specifications, manufactured by Heraeus, were irradiated in one of the TANs located around the ATLAS experiment by the Beam RAte of Neutrals (BRAN) detector group. This campaign took place during the Run 2 p+p data takin… ▽ More The Target Absorbers for Neutrals (TANs) represent one of the most radioactive regions in the Large Hadron Collider (LHC). Seven 40 cm long fused silica rods with different dopant specifications, manufactured by Heraeus, were irradiated in one of the TANs located around the ATLAS experiment by the Beam RAte of Neutrals (BRAN) detector group. This campaign took place during the Run 2 p+p data taking, which occurred between 2016 and 2018. This paper reports a complete characterization of optical transmission per unit length of irradiated fused silica materials as a function of wavelength (240 nm - 1500 nm), dose (up to 18 MGy), and level of OH and H$_2$ dopants introduced in the manufacturing process. The dose delivered to the rods was estimated using Monte Carlo simulations performed by the CERN FLUKA team. △ Less

Submitted 8 December, 2022; v1 submitted 6 December, 2022; originally announced December 2022.

Comments: 29 pages, 15 figures, to be submitted to NIM-A

Measurement of transverse beam emittance of split beams for the CERN Proton Synchrotron Multi-Turn Extraction

Authors: G. Russo, F. Cerutti, L. S. Esposito, G. Franchetti, M. Giovannozzi, J. R. Hunt, A. Huschauer

Abstract: Crossing a horizontal nonlinear resonance is the approach that can be used to split a beam in several beamlets with the goal to perform multi-turn extraction from a circular particle accelerator. Such an approach has been successfully implemented in the CERN Proton Synchrotron and is used routinely for the production of high-intensity proton beams for fixed-target physics at the Super Proton Synch… ▽ More Crossing a horizontal nonlinear resonance is the approach that can be used to split a beam in several beamlets with the goal to perform multi-turn extraction from a circular particle accelerator. Such an approach has been successfully implemented in the CERN Proton Synchrotron and is used routinely for the production of high-intensity proton beams for fixed-target physics at the Super Proton Synchrotron. Recently, thanks to the deployment of diamond detectors, originally installed to monitor the beam losses at extraction, it has been possible to measure the horizontal beam emittance of the split beam just prior to extraction. This is the first time that an emittance measurement is attempted for split beams, i.e. in a regime of highly nonlinear beam dynamics. In this paper, the technique is presented and its application to the analysis of the experimental data is presented and discussed in detail. This result is essential for the performance assessment of the splitting process and for the design of further performance improvements. △ Less

Submitted 28 November, 2022; originally announced November 2022.

The CERN n TOF NEAR station for astrophysics- and application-related neutron activation measurements

Authors: N. Patronis, A. Mengoni, N. Colonna, M. Cecchetto, C. Domingo-Pardo, O. Aberle, J. Lerendegui-Marco, G. Gervino, M. E. Stamati, S. Goula, A. P. Bernardes, M. Mastromarco, A. Manna, R. Vlastou, C. Massimi, M. Calviani, V. Alcayne, S. Altieri, S. Amaducci, J. Andrzejewski, V. Babiano-Suarez, M. Bacak, J. Balibrea, C. Beltrami, S. Bennett , et al. (108 additional authors not shown)

Abstract: A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to th… ▽ More A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to the NEAR station through a hole in the shielding wall of the target, inside which a collimator is inserted. The new area is complemented with a γ-ray spectroscopy laboratory, the GEAR station, equipped with a high efficiency HPGe detector, for the measurement of the activity resulting from irradiation of a sample in the NEAR station. The use of a moderator/filter assembly is envisaged, in order to produce a neutron beam of Maxwellian shape at different thermal energies, necessary for the measurement of Maxwellian Averaged Cross Sections of astrophysical interest. A new fast-cycling activation technique is also being investigated, for measurements of reactions leading to isotopes of very short half life. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Energy deposition studies in the LHCb insertion region from the validation to a step into the Hilumi challenge

Authors: Alessia Ciccotelli, Robert B. Appleby, Francesco Cerutti, Kacper Bilko, Luigi Salvatore Esposito, Ruben Garcia Alia, Anton Lechner, Andrea Tsinganis

Abstract: The LHCb (Large Hadron Collider beauty) experiment at CERN aims at achieving a significantly higher luminosity than originally planned by means of two major upgrades: the Upgrade I that took place during the Long Shutdown 2 (LS2) and the Upgrade II foreseen for LS4. Such an increase in instantaneous and integrated luminosity with respect to the design values requires to reassess the radiation expo… ▽ More The LHCb (Large Hadron Collider beauty) experiment at CERN aims at achieving a significantly higher luminosity than originally planned by means of two major upgrades: the Upgrade I that took place during the Long Shutdown 2 (LS2) and the Upgrade II foreseen for LS4. Such an increase in instantaneous and integrated luminosity with respect to the design values requires to reassess the radiation exposure of LHC magnets, cryogenics and electronic equipment placed in the Insertion Region 8 (IR8) around LHCb. Monte Carlo simulations are a powerful tool to understand and predict the interaction between particle showers and accelerator elements, especially in case of future scenarios. For this purpose, their validation through the comparison with available measurements is a relevant step. A detailed IR8 model, including the LHCb detector, has been implemented with the FLUKA code. The objective of this study is to evaluate radiation levels due to proton-proton collisions and benchmark the predicted dose values against Beam Loss Monitor (BLM) measurements performed in 2018. Finally, we comment on the upcoming LHC run (Run 3), featuring a first luminosity jump in LHCb. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: 13 pages, 17 figures

$^{22}$Na Activation Level Measurements of Fused Silica Rods in the LHC Target Absorber for Neutrals (TAN) Compared to FLUKA Simulations

Authors: S. Yang, M. Sabate Gilarte, A. Tate, N. Santiago, R. Longo, S. Mazzoni, F. Cerutti, E. Bravin, M. Grosse Perdekamp, G. Lerner, D. Prelipcean, Z. Citron, B. Cole, S. Jackobsen, M. D. Kaminski, T. Koeth, C. Lantz, D. MacLean, A. Mignerey, M. Murray, M. Palm, M. Phipps, P. Steinberg, A. Tsinganis

Abstract: The Target Absorbers for Neutrals (TANs) are located in a high-intensity radiation environment inside the tunnel of the Large Hadron Collider (LHC). TANs are positioned about $140$ m downstream from the beam interaction points. Seven $40$ cm long fused silica rods with different dopant specifications were irradiated in the TAN by the Beam RAte of Neutrals (BRAN) detector group during $p$+$p$ data… ▽ More The Target Absorbers for Neutrals (TANs) are located in a high-intensity radiation environment inside the tunnel of the Large Hadron Collider (LHC). TANs are positioned about $140$ m downstream from the beam interaction points. Seven $40$ cm long fused silica rods with different dopant specifications were irradiated in the TAN by the Beam RAte of Neutrals (BRAN) detector group during $p$+$p$ data taking from 2016 to 2018 at the LHC. The peak dose delivered to the fused silica rods was $18$ MGy. We report measurements of the $^{22}$Na activation of the fused silica rods carried out at the University of Illinois at Urbana-Champaign and Argonne National Laboratory. At the end of the irradiation campaign, the maximum $^{22}$Na activity observed was $A=21$ kBq$/{\rm cm^3}$ corresponding to a density, $ρ= 2.5\times 10^{12} /{\rm cm^3}$, of $^{22}$Na nuclei. FLUKA Monte Carlo simulations have been performed by the CERN FLUKA team to estimate $^{22}$Na activities for the irradiated BRAN rod samples. The simulations reproduce the $^{22}$Na activity profile measured along the rods, with a 35% underestimation of the experimental measurement results. △ Less

Submitted 5 April, 2022; v1 submitted 4 April, 2022; originally announced April 2022.

Comments: 11 pages, 14 figures, to be submitted to PRAB

The Forward Physics Facility at the High-Luminosity LHC

Authors: Jonathan L. Feng, Felix Kling, Mary Hall Reno, Juan Rojo, Dennis Soldin, Luis A. Anchordoqui, Jamie Boyd, Ahmed Ismail, Lucian Harland-Lang, Kevin J. Kelly, Vishvas Pandey, Sebastian Trojanowski, Yu-Dai Tsai, Jean-Marco Alameddine, Takeshi Araki, Akitaka Ariga, Tomoko Ariga, Kento Asai, Alessandro Bacchetta, Kincso Balazs, Alan J. Barr, Michele Battistin, Jianming Bian, Caterina Bertone, Weidong Bai , et al. (211 additional authors not shown)

Abstract: High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod… ▽ More High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Comments: 429 pages, contribution to Snowmass 2021

Report number: UCI-TR-2022-01, CERN-PBC-Notes-2022-001, FERMILAB-PUB-22-094-ND-SCD-T, INT-PUB-22-006, BONN-TH-2022-04

Multiple scattering of channeled and non-channeled positively charged particles in bent monocrystalline silicon

Authors: W. Scandale, G. Arduini, F. Cerutti, L. S. Esposito, M. Garattini, S. Gilardoni, R. Losito, A. Masi, D. Mirarchi, S. Montesano, S. Redaelli, R. Rossi, G. Smirnov, L. Burmistrov, S. Dubos, V. Puill, A. Stocchi, L. Bandiera, V. Guidi, A. Mazzolari, M. Romagnoni, F. Murtas, F. Addesa, G. Cavoto, F. Iacoangeli , et al. (17 additional authors not shown)

Abstract: We present the results of an experimental study of multiple scattering of positively charged high energy particles in bent samples of monocrystalline silicon. This work confirms the recently discovered effect of a strong reduction in the rms multiple scattering angle of particles channeled in the silicon (111) plane. The effect is observed in the plane orthogonal to the bending plane. We show in d… ▽ More We present the results of an experimental study of multiple scattering of positively charged high energy particles in bent samples of monocrystalline silicon. This work confirms the recently discovered effect of a strong reduction in the rms multiple scattering angle of particles channeled in the silicon (111) plane. The effect is observed in the plane orthogonal to the bending plane. We show in detail the influence of angular constraints on the magnitude of the effect. Comparison of the multiple scattering process at different energies indicates a violation of the law of inverse proportionality of the rms angle of channeled particles with energy. By increasing the statistics, we have improved the results of multiple scattering measurements for particles moving, but not channeled, in silicon crystals. △ Less

Submitted 31 January, 2022; v1 submitted 24 January, 2022; originally announced January 2022.

Comments: arXiv admin note: text overlap with arXiv:1910.00250 minor fixes

First neutrino interaction candidates at the LHC

Authors: FASER Collaboration, Henso Abreu, Yoav Afik, Claire Antel, Jason Arakawa, Akitaka Ariga, Tomoko Ariga, Florian Bernlochner, Tobias Boeckh, Jamie Boyd, Lydia Brenner, Franck Cadoux, David W. Casper, Charlotte Cavanagh, Francesco Cerutti, Xin Chen, Andrea Coccaro, Monica D'Onofrio, Candan Dozen, Yannick Favre, Deion Fellers, Jonathan L. Feng, Didier Ferrere, Stephen Gibson, Sergio Gonzalez-Sevilla , et al. (51 additional authors not shown)

Abstract: FASER$ν$ at the CERN Large Hadron Collider (LHC) is designed to directly detect collider neutrinos for the first time and study their cross sections at TeV energies, where no such measurements currently exist. In 2018, a pilot detector employing emulsion films was installed in the far-forward region of ATLAS, 480 m from the interaction point, and collected 12.2 fb$^{-1}$ of proton-proton collision… ▽ More FASER$ν$ at the CERN Large Hadron Collider (LHC) is designed to directly detect collider neutrinos for the first time and study their cross sections at TeV energies, where no such measurements currently exist. In 2018, a pilot detector employing emulsion films was installed in the far-forward region of ATLAS, 480 m from the interaction point, and collected 12.2 fb$^{-1}$ of proton-proton collision data at a center-of-mass energy of 13 TeV. We describe the analysis of this pilot run data and the observation of the first neutrino interaction candidates at the LHC. This milestone paves the way for high-energy neutrino measurements at current and future colliders. △ Less

Submitted 26 October, 2021; v1 submitted 13 May, 2021; originally announced May 2021.

Comments: Auxiliary materials are available at https://faser.web.cern.ch/fasernu-first-neutrino-interaction-candidates

Double-crystal measurements at the CERN SPS

Authors: W. Scandale, G. Arduini, F. Cerutti, M. D'Andrea, L. S. Esposito, M. Garattini, S. Gilardoni, D. Mirarchi, S. Montesano, A. Natochii, S. Redaelli, R. Rossi, G. I. Smirnov, L. Burmistrov, S. Dubos, V. Puill, A. Stocchi, F. Addesa, F. Murtas, F. Galluccio, A. D. Kovalenko, A. M. Taratin, A. S. Denisov, Yu. A. Gavrikov, Yu. M. Ivanov , et al. (13 additional authors not shown)

Abstract: The UA9 setup, installed in the Super Proton Synchrotron (SPS) at CERN, was exploited for a proof of principle of the double-crystal scenario, proposed to measure the electric and the magnetic moments of short-lived baryons in a high-energy hadron collider, such as the Large Hadron Collider (LHC). Linear and angular actuators were used to position the crystals and establish the required beam confi… ▽ More The UA9 setup, installed in the Super Proton Synchrotron (SPS) at CERN, was exploited for a proof of principle of the double-crystal scenario, proposed to measure the electric and the magnetic moments of short-lived baryons in a high-energy hadron collider, such as the Large Hadron Collider (LHC). Linear and angular actuators were used to position the crystals and establish the required beam configuration. Timepix detectors and high-sensitivity Beam Loss Monitors were exploited to observe the deflected beams. Linear and angular scans allowed exploring the particle interactions with the two crystals and recording their efficiency. The measured values of the beam trajectories, profiles and of the channeling efficiency agree with the results of a Monte-Carlo simulation. △ Less

Submitted 26 March, 2021; originally announced March 2021.

Comments: 25 pages, 13 figures

Imaging neutron capture cross sections: i-TED proof-of-concept and future prospects based on Machine-Learning techniques

Authors: V. Babiano-Suárez, J. Lerendegui-Marco, J. Balibrea-Correa, L. Caballero, D. Calvo, I. Ladarescu, C. Domingo-Pardo, F. Calviño, A. Casanovas, A. Tarifeño-Saldivia, V. Alcayne, C. Guerrero, M. A. Millán-Callado, M. T. Rodríguez González, M. Barbagallo, O. Aberle, S. Amaducci, J. Andrzejewski, L. Audouin, M. Bacak, S. Bennett, E. Berthoumieux, J. Billowes, D. Bosnar, A. Brown , et al. (110 additional authors not shown)

Abstract: i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background reje… ▽ More i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background rejection. To this aim both $^{197}$Au($n,γ$) and $^{56}$Fe($n, γ$) reactions were measured at CERN n\_TOF using an i-TED demonstrator based on only three position-sensitive detectors. Two \cds detectors were also used to benchmark the performance of i-TED. The i-TED prototype built for this study shows a factor of $\sim$3 higher detection sensitivity than state-of-the-art \cds detectors in the $\sim$10~keV neutron energy range of astrophysical interest. This paper explores also the perspectives of further enhancement in performance attainable with the final i-TED array consisting of twenty position-sensitive detectors and new analysis methodologies based on Machine-Learning techniques. △ Less

Submitted 18 December, 2020; originally announced December 2020.

Comments: 16 pages, 16 figures

FCC-hh Experimental Insertion Region Design

Authors: Jose L. Abelleira, Robert B. Appleby, Sergey Arsenyev, Javier Barranco, Michael Benedikt, Maria Ilaria Besana, Oscar Blanco Garcia, Manuela Boscolo, David Boutin, Xavier Buffat, Helmut Burkhardt, Francesco Cerutti, Antoine Chance, Francesco Collamati, Emilia Cruz-Alaniz, Barbara Dalena, Michael Hofer, Barbara L. Humann, Angelo Infantino, Jacqueline Keintzel, Andy Langner, Marian Luckhof, Roman Martin, Tatiana Pieloni, Haroon Rafique , et al. (7 additional authors not shown)

Abstract: The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insert… ▽ More The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insertion region designs with a complete assessment of the main challenges, as collision debris with two orders of magnitude larger power than current colliders, beam-beam interactions in long insertions, dynamic aperture for optics with peak $β$ functions one order of magnitude above current colliders, photon background from synchrotron radiation and cross talk between the insertion regions. An alternative design avoiding the use of crab cavities with a small impact on performance is also presented. △ Less

Submitted 23 July, 2020; originally announced July 2020.

Comments: 74 pages

Further studies on the physics potential of an experiment using LHC neutrinos

Authors: N. Beni, M. Brucoli, V. Cafaro, F. Cerutti, G. M. Dallavalle, S. Danzeca, A. DeRoeck, A. De Rujula, D. Fasanella, V. Giordano, C. Guandalini, A. Ioannisyan, D. Lazic, A. Margotti, S. Lo Meo, F. L. Navarria, L. Patrizii, T. Rovelli, M. Sabate-Gilarte, F. Sanchez Galan, P. Santos Diaz, G. Sirri, Z. Szillasi, C. -E. Wulz

Abstract: We discuss an experiment to investigate neutrino physics at the LHC in Run 3, with emphasis on tau flavour. As described in our previous paper [arXiv:1903.06564v1], the detector can be installed in the decommissioned TI18 tunnel, about 480 m downstream the ATLAS cavern, after the first bending dipoles of the LHC arc. In that location, the prolongation of the beam Line-of-Sight from Interaction Poi… ▽ More We discuss an experiment to investigate neutrino physics at the LHC in Run 3, with emphasis on tau flavour. As described in our previous paper [arXiv:1903.06564v1], the detector can be installed in the decommissioned TI18 tunnel, about 480 m downstream the ATLAS cavern, after the first bending dipoles of the LHC arc. In that location, the prolongation of the beam Line-of-Sight from Interaction Point IP1 to TI18 traverses about 100 m of rock. The detector intercepts the intense neutrino flux, generated by the LHC beams colliding in IP1, at large pseudorapidity eta, where neutrino energies can exceed a TeV. This paper focuses on optimizing global features of the experiment, like detector mass and acceptance. Since the neutrino-nucleon interaction cross section grows almost linearly with energy, the detector can be light and still collect a considerable sample of neutrino events; in the present study it weighs less than 3 tons. The detector is positioned off the beam axis, slightly above the ideal prolongation of the LHC beam from the straight section, covering 7.4 < eta < 9.2. In this configuration, the flux at high energies (0.5-1.5 TeV and beyond) is found to be dominated by neutrinos originating directly from IP1, mostly from charm decays, of which about 50% are electron neutrinos and about 5% are tau neutrinos. The contribution of pion and kaon decays to the muon neutrino flux is studied by means of simulations that embed the LHC optics and found small at high energies. The above studies indicate that with 150 /fb of delivered LHC luminosity in Run 3 the experiment can record a few thousand very high energy neutrino charged current interactions and over 50 tau neutrino charged current events. △ Less

Submitted 16 April, 2020; originally announced April 2020.

Comments: 2+20 pages, 15 figures. It is a follow-up of paper arXiv:1903.06564v1 (2019/03/05). arXiv admin note: substantial text overlap with arXiv:1910.11340

SND@LHC

Authors: SHiP Collaboration, C. Ahdida, A. Akmete, R. Albanese, A. Alexandrov, M. Andreini, A. Anokhina, S. Aoki, G. Arduini, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, F. Baaltasar Dos Santos, A. Baranov, F. Bardou, G. J. Barker, M. Battistin, J. Bauche, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani , et al. (319 additional authors not shown)

Abstract: We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)… ▽ More We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Comments: Letter of Intent

Report number: CERN-LHCC-2020-002, LHCC-I-035

Technical Proposal: FASERnu

Authors: FASER Collaboration, Henso Abreu, Marco Andreini, Claire Antel, Akitaka Ariga, Tomoko Ariga, Caterina Bertone, Jamie Boyd, Andy Buckley, Franck Cadoux, David W. Casper, Francesco Cerutti, Xin Chen, Andrea Coccaro, Salvatore Danzeca, Liam Dougherty, Candan Dozen, Peter B. Denton, Yannick Favre, Deion Fellers, Jonathan L. Feng, Didier Ferrere, Jonathan Gall, Iftah Galon, Stephen Gibson , et al. (47 additional authors not shown)

Abstract: FASERnu is a proposed small and inexpensive emulsion detector designed to detect collider neutrinos for the first time and study their properties. FASERnu will be located directly in front of FASER, 480 m from the ATLAS interaction point along the beam collision axis in the unused service tunnel TI12. From 2021-23 during Run 3 of the 14 TeV LHC, roughly 1,300 electron neutrinos, 20,000 muon neutri… ▽ More FASERnu is a proposed small and inexpensive emulsion detector designed to detect collider neutrinos for the first time and study their properties. FASERnu will be located directly in front of FASER, 480 m from the ATLAS interaction point along the beam collision axis in the unused service tunnel TI12. From 2021-23 during Run 3 of the 14 TeV LHC, roughly 1,300 electron neutrinos, 20,000 muon neutrinos, and 20 tau neutrinos will interact in FASERnu with TeV-scale energies. With the ability to observe these interactions, reconstruct their energies, and distinguish flavors, FASERnu will probe the production, propagation, and interactions of neutrinos at the highest human-made energies ever recorded. The FASERnu detector will be composed of 1000 emulsion layers interleaved with tungsten plates. The total volume of the emulsion and tungsten is 25cm x 25cm x 1.35m, and the tungsten target mass is 1.2 tonnes. From 2021-23, 7 sets of emulsion layers will be installed, with replacement roughly every 20-50 1/fb in planned Technical Stops. In this document, we summarize FASERnu's physics goals and discuss the estimates of neutrino flux and interaction rates. We then describe the FASERnu detector in detail, including plans for assembly, transport, installation, and emulsion replacement, and procedures for emulsion readout and analyzing the data. We close with cost estimates for the detector components and infrastructure work and a timeline for the experiment. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 49 pages, 25 figures; submitted to the CERN LHCC on 28 October 2019

Report number: CERN-LHCC-2019-017, LHCC-P-015, UCI-TR-2019-25

Review and new concepts for neutron-capture measurements of astrophysical interest

Authors: C. Domingo-Pardo, V. Babiano-Suarez, J. Balibrea-Correa, L. Caballero, I. Ladarescu, J. Lerendegui-Marco, J. L. Tain, F. Calviño, A. Casanovas, A. Segarra, A. E. Tarifeño-Saldivia, C. Guerrero, M. A. Millán-Callado, J. M. Quesada, M. T. Rodríguez-González, O. Aberle, V. Alcayne, S. Amaducci, J. Andrzejewski, L. Audouin, M. Bacak, M. Barbagallo, S. Bennett, E. Berthoumieux, D. Bosnar , et al. (106 additional authors not shown)

Abstract: The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on t… ▽ More The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on total energy detectors will be presented to illustrate how, advances in instrumentation have led, over the years, to the assessment and discovery of many new aspects of $s$-process nucleosynthesis and to the progressive refinement of theoretical models of stellar evolution. A summary will be presented on current efforts to develop new detection concepts, such as the Total-Energy Detector with $γ$-ray imaging capability (i-TED). The latter is based on the simultaneous combination of Compton imaging with neutron time-of-flight (TOF) techniques, in order to achieve a superior level of sensitivity and selectivity in the measurement of stellar neutron capture rates. △ Less

Submitted 16 November, 2019; originally announced November 2019.

Comments: Nuclear Physics in Astrophysics IX - Conference Proceedings

XSEN: a $ν$N Cross Section Measurement using High Energy Neutrinos from pp collisions at the LHC

Authors: N. Beni, S. Buontempo, T. Camporesi, F. Cerutti, G. M. Dallavalle, G. De Lellis, A. De Roeck, A. De Rujula, A. Di Crescenzo, D. Fasanella, A. Ioannisyan, D. Lazic, A. Margotti, S. Lo Meo, F. L. Navarria, L. Patrizii, T. Rovelli, M. Sabate-Gilarte, F. Sanchez Galan, P. Santos Diaz, G. Sirri, Z. Szillasi, C. Wulz

Abstract: XSEN (Cross Section of Energetic Neutrinos) is a small experiment designed to study, for the first time, neutrino-nucleon interactions (including the tau flavour) in the 0.5-1 TeV neutrino energy range. The detector will be installed in the decommissioned TI18 tunnel and uses nuclear emulsions. Its simplicity allows construction and installation before the LHC Run 3, 2021-2023; with 150/fb in Run3… ▽ More XSEN (Cross Section of Energetic Neutrinos) is a small experiment designed to study, for the first time, neutrino-nucleon interactions (including the tau flavour) in the 0.5-1 TeV neutrino energy range. The detector will be installed in the decommissioned TI18 tunnel and uses nuclear emulsions. Its simplicity allows construction and installation before the LHC Run 3, 2021-2023; with 150/fb in Run3, the experiment can record up to two thousand neutrino interactions, and up to a hundred tau neutrino events. The XSEN detector intercepts the intense neutrino flux, generated by the LHC beams colliding in IP1, at large pseudo-rapidities, where neutrino energies can exceed the TeV. Since the neutrino-N interaction cross section grows almost linearly with energy, the detector can be light and still collect a considerable sample of neutrino interactions. In our proposal, the detector weighs less than 3 tons. It is lying slightly above the ideal prolongation of the LHC beam from the straight section; this configuration, off the beam axis, although very close to it, enhances the contribution of neutrinos from c and b decays, and consequently of tau neutrinos. The detector fits in the TI18 tunnel without modifications. We plan for a demonstrator experiment in 2021 with a small detector of about 0.5 tons; with 25/fb, nearly a hundred interactions of neutrinos of about 1 TeV can be recorded. The aim of this pilot run is a good in-situ characterisation of the machine-generated backgrounds, an experimental verification of the systematic uncertainties and efficiencies, and a tuning of the emulsion analysis infrastructure and efficiency. This Letter provides an overview of the experiment motivations, location, design constraints, technology choice, and operation. △ Less

Submitted 24 October, 2019; originally announced October 2019.

Report number: CERN-LHCC-2019-014 / LHCC-I-033

Double-crystal setup measurements at the CERN SPS

Authors: W. Scandale, F. Cerutti, L. S. Esposito, M. Garattini, S. Gilardoni, S. Montesano, R. Rossi, L. Burmistrov, S. Dubos, A. Natochii, V. Puill, A. Stocchi, V. Zhovkovska, F. Murtas, F. Addesa, F. Iacoangeli, F. Galluccio, A. D. Kovalenko, A. M. Taratin, G. I. Smirnov, A. S. Denisov, Yu. A. Gavrikov, Yu. M. Ivanov, L. P. Lapina, L. G. Malyarenko , et al. (11 additional authors not shown)

Abstract: In this paper, we discuss an experimental layout for the two-crystals scenario at the Super Proton Synchrotron (SPS) accelerator. The research focuses on a fixed target setup at the circulating machine in a frame of the Physics Beyond Colliders (PBC) project at CERN. The UA9 experiment at the SPS serves as a testbench for the proof of concept, which is planning to be projected onto the Large Hadro… ▽ More In this paper, we discuss an experimental layout for the two-crystals scenario at the Super Proton Synchrotron (SPS) accelerator. The research focuses on a fixed target setup at the circulating machine in a frame of the Physics Beyond Colliders (PBC) project at CERN. The UA9 experiment at the SPS serves as a testbench for the proof of concept, which is planning to be projected onto the Large Hadron Collider (LHC) scale. The presented in the text configuration was used for the quantitative characterization of the deflected particle beam by a pair of bent silicon crystals. For the first time in the double-crystal configuration, a particle deflection efficiency by the second crystal of $0.188 \pm 3 \cdot 10^{-5}$ and $0.179 \pm 0.013$ was measured on the accelerator by means of the Timepix detector and Beam Loss Monitor (BLM) respectively. In this setup, a wide range angular scan allowed a possibility to \textit{in situ} investigate different crystal working regimes (channeling, volume reflection, etc.), and to measure a bent crystal torsion. △ Less

Submitted 6 September, 2019; originally announced September 2019.

Comments: 6 pages, 8 figures. To be submitted to PLB

Technical Proposal for FASER: ForwArd Search ExpeRiment at the LHC

Authors: FASER Collaboration, Akitaka Ariga, Tomoko Ariga, Jamie Boyd, Franck Cadoux, David W. Casper, Francesco Cerutti, Salvatore Danzeca, Liam Dougherty, Yannick Favre, Jonathan L. Feng, Didier Ferrere, Jonathan Gall, Iftah Galon, Sergio Gonzalez-Sevilla, Shih-Chieh Hsu, Giuseppe Iacobucci, Enrique Kajomovitz, Felix Kling, Susanne Kuehn, Mike Lamont, Lorne Levinson, Hidetoshi Otono, John Osborne, Brian Petersen , et al. (11 additional authors not shown)

Abstract: FASER is a proposed small and inexpensive experiment designed to search for light, weakly-interacting particles during Run 3 of the LHC from 2021-23. Such particles may be produced in large numbers along the beam collision axis, travel for hundreds of meters without interacting, and then decay to standard model particles. To search for such events, FASER will be located 480 m downstream of the ATL… ▽ More FASER is a proposed small and inexpensive experiment designed to search for light, weakly-interacting particles during Run 3 of the LHC from 2021-23. Such particles may be produced in large numbers along the beam collision axis, travel for hundreds of meters without interacting, and then decay to standard model particles. To search for such events, FASER will be located 480 m downstream of the ATLAS IP in the unused service tunnel TI12 and be sensitive to particles that decay in a cylindrical volume with radius R=10 cm and length L=1.5 m. FASER will complement the LHC's existing physics program, extending its discovery potential to a host of new, light particles, with potentially far-reaching implications for particle physics and cosmology. This document describes the technical details of the FASER detector components: the magnets, the tracker, the scintillator system, and the calorimeter, as well as the trigger and readout system. The preparatory work that is needed to install and operate the detector, including civil engineering, transport, and integration with various services is also presented. The information presented includes preliminary cost estimates for the detector components and the infrastructure work, as well as a timeline for the design, construction, and installation of the experiment. △ Less

Submitted 21 December, 2018; originally announced December 2018.

Comments: 82 pages, 62 figures; submitted to the CERN LHCC on 7 November 2018

Report number: CERN-LHCC-2018-036, LHCC-P-013, UCI-TR-2018-22, KYUSHU-RCAPP-2018-07

Preliminary Modeling Of Radiation Levels At The Fermilab PIP-II Linac

Authors: L. Lari, F. Cerutti, L. S. Esposito, C. Baffes, S. J. Dixon, N. V. Mokhov, I. Rakhno, I. S. Tropin

Abstract: PIP-II is the Fermilab's flagship project for providing powerful, high-intensity proton beams to the laboratory's experiments. The heart of PIP-II is an 800-MeV superconducting linac accelerator. It will be located in a new tunnel with new service buildings and connected to the present Booster through a new transfer line. To support the design of civil engineering and mechanical integration, this… ▽ More PIP-II is the Fermilab's flagship project for providing powerful, high-intensity proton beams to the laboratory's experiments. The heart of PIP-II is an 800-MeV superconducting linac accelerator. It will be located in a new tunnel with new service buildings and connected to the present Booster through a new transfer line. To support the design of civil engineering and mechanical integration, this paper provides preliminary estimation of radiation level in the gallery at an operational beam loss limit of 0.1 W/m, by means of Monte Carlo calculations with FLUKA and MARS15 codes. △ Less

Submitted 14 June, 2018; originally announced June 2018.

Comments: 4 pp. Proceedings of IPAC2018, Vancouver, BC, Canada

Report number: Fermilab-Conf-18-119-AD

Experimental setup and procedure for the measurement of the 7Be(n,p)7Li reaction at n_TOF

Authors: M. Barbagallo, J. Andrzejewski, M. Mastromarco, J. Perkowski, L. A. Damone, A. Gawlik, L. Cosentino, P. Finocchiaro, E. A. Maugeri, A. Mazzone, R. Dressler, S. Heinitz, N. Kivel, D. Schumann, N. Colonna, O. Aberle, S. Amaducci, L. Audouin, M. Bacak, J. Balibrea, F. Bečvář, G. Bellia, E. Berthoumieux, J. Billowes, D. Bosnar , et al. (103 additional authors not shown)

Abstract: Following the completion of the second neutron beam line and the related experimental area (EAR2) at the n_TOF spallation neutron source at CERN, several experiments were planned and performed. The high instantaneous neutron flux available in EAR2 allows to investigate neutron indiced reactions with charged particles in the exit channel even employing targets made out of small amounts of short-liv… ▽ More Following the completion of the second neutron beam line and the related experimental area (EAR2) at the n_TOF spallation neutron source at CERN, several experiments were planned and performed. The high instantaneous neutron flux available in EAR2 allows to investigate neutron indiced reactions with charged particles in the exit channel even employing targets made out of small amounts of short-lived radioactive isotopes. After the successful measurement of the 7Be(n,α)α cross section, the 7Be(n,p)7Li reaction was studied in order to provide still missing cross section data of relevance for Big Bang Nucleosynthesis (BBN), in an attempt to find a solution to the cosmological Lithium abundance problem. This paper describes the experimental setup employed in such a measurement and its characterization. △ Less

Submitted 3 August, 2017; originally announced August 2017.

Report number: CERN-EP-DRAFT-MISC-2017-002

Energy Deposition and Radiation to Electronics

Authors: A. Bignami, F. Broggi, M. Brugger, F. Cerutti, L. S. Esposito, A. Lechner, N. V. Mokhov, I. L. Rakhno, C. Santini, E. Skordis, I. S. Tropin

Abstract: Chapter 10 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme tempe… ▽ More Chapter 10 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 16 pages, chapter 10 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. arXiv admin note: text overlap with arXiv:1504.00594

Journal ref: CERN Yellow Report CERN 2015-005, pp.171-186

Collimation System

Authors: R. B. Appleby, R. Barlow, A. Bertarelli, R. Bruce, F. Carra, F. Cerutti, L. Esposito, A. Faus-Golfe, H. Garcia Morales, L. Gentini, S. M. Gibson, P. Gradassi, J. M. Jowett, R. Kwee-Hinzmann, L. Lari, A. Lechner, T. Markiewicz, A. Marsili, J. Molson, L. J. Nevay, E. Quaranta, H. Rafique, S. Redaelli, M. Serluca, E. Skordis , et al. (3 additional authors not shown)

Abstract: Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper… ▽ More Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 22 pages, chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report

Journal ref: CERN Yellow Report CERN 2015-005, pp.109-130

Beam-Material Interaction

Authors: N. V. Mokhov, F. Cerutti

Abstract: Th is paper is motivated by the growing importance of better understanding of the phenomena and consequences of high- intensity energetic particle beam interactions with accelerator, generic target , and detector components. It reviews the principal physical processes of fast-particle interactions with matter, effects in materials under irradiation, materials response, related to component lifetim… ▽ More Th is paper is motivated by the growing importance of better understanding of the phenomena and consequences of high- intensity energetic particle beam interactions with accelerator, generic target , and detector components. It reviews the principal physical processes of fast-particle interactions with matter, effects in materials under irradiation, materials response, related to component lifetime and performance, simulation techniques, and methods of mitigating the impact of radiation on the components and envir onment in challenging current and future application △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 28 pages, contribution to the 2014 Joint International Accelerator School: Beam Loss and Accelerator Protection, Newport Beach, CA, USA , 5-14 Nov 2014

Journal ref: CERN Yellow Report CERN-2016-002, pp.83-110

Experimental setup and procedure for the measurement of the 7Be(n,α)α reaction at n_TOF

Authors: L. Cosentino, A. Musumarra, M. Barbagallo, A. Pappalardo, N. Colonna, L. Damone, M. Piscopo, P. Finocchiaro, E. Maugeri, S. Heinitz, D. Schumann, R. Dressler, N. Kivel, O. Aberle, J. Andrzejewski, L. Audouin, M. Ayranov, M. Bacak, S. Barros, J. Balibrea-Correa, V. Beecares, F. Becvar, C. Beinrucker, E. Berthoumieux, J. Billowes , et al. (107 additional authors not shown)

Abstract: The newly built second experimental area EAR2 of the n_TOF spallation neutron source at CERN allows to perform (n, charged particles) experiments on short-lived highly radioactive targets. This paper describes a detection apparatus and the experimental procedure for the determination of the cross-section of the 7Be(n,α) reaction, which represents one of the focal points toward the solution of the… ▽ More The newly built second experimental area EAR2 of the n_TOF spallation neutron source at CERN allows to perform (n, charged particles) experiments on short-lived highly radioactive targets. This paper describes a detection apparatus and the experimental procedure for the determination of the cross-section of the 7Be(n,α) reaction, which represents one of the focal points toward the solution of the cosmological Lithium abundance problem, and whose only measurement, at thermal energy, dates back to 1963. The apparently unsurmountable experimental difficulties stemming from the huge 7Be γ-activity, along with the lack of a suitable neutron beam facility, had so far prevented further measurements. The detection system is subject to considerable radiation damage, but is capable of disentangling the rare reaction signals from the very high background. This newly developed setup could likely be useful also to study other challenging reactions requiring the detectors to be installed directly in the neutron beam. △ Less

Submitted 1 April, 2016; originally announced April 2016.

Comments: submitted to Nuclear Instruments and Methods in Physics Research A

Journal ref: Nuclear Instruments and Methods A 830 (2016) 197

Energy deposition studies for the High-Luminosity Large Hadron Collider inner triplet magnets

Authors: N. V. Mokhov, I. L. Rakhno, I. S. Tropin, F. Cerutti, L. S. Esposito, A. Lechner

Abstract: A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3… ▽ More A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3000 fb-1, the peak dose in the innermost magnet insulator ranges from 20 to 35 MGy. Dynamic heat loads to the triplet magnet cold mass are calculated to evaluate the cryogenic capability. In general, FLUKA and MARS results are in a very good agreement. △ Less

Submitted 2 April, 2015; originally announced April 2015.

Comments: 24 pp

Report number: Fermilab-PUB-15-095-APC

Testing Beam-Induced Quench Levels of LHC Superconducting Magnets

Authors: B. Auchmann, T. Baer, M. Bednarek, G. Bellodi, C. Bracco, R. Bruce, F. Cerutti, V. Chetvertkova, B. Dehning, P. P. Granieri, W. Hofle, E. B. Holzer, A. Lechner, E. Nebot Del Busto, A. Priebe, S. Redaelli, B. Salvachua, M. Sapinski, R. Schmidt, N. Shetty, E. Skordis, M. Solfaroli, J. Steckert, D. Valuch, A. Verweij , et al. (3 additional authors not shown)

Abstract: In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not… ▽ More In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not been a single beam- induced quench during normal collider operation with stored beam. The conditions, however, are expected to become much more challenging after the long LHC shutdown. The magnets will be operating at near nominal currents, and in the presence of high energy and high intensity beams with a stored energy of up to 362 MJ per beam. In this paper we summarize our efforts to understand the quench levels of LHC superconducting magnets. We describe beam-loss events and dedicated experiments with beam, as well as the simulation methods used to reproduce the observable signals. The simulated energy deposition in the coils is compared to the quench levels predicted by electro-thermal models, thus allowing to validate and improve the models which are used to set beam-dump thresholds on beam-loss monitors for Run 2. △ Less

Submitted 26 June, 2015; v1 submitted 18 February, 2015; originally announced February 2015.

Comments: 19 pages

Journal ref: Phys. Rev. ST Accel. Beams 18, 061002 (2015)

Energy Deposition Studies for the Hi-Lumi LHC Inner Triplet Magnets

Authors: N. V. Mokhov, I. L. Rakhno, S. I. Striganov, I. S. Tropin, F. Cerutti, L. Esposito, A. Lechner

Abstract: A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3… ▽ More A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3000 fb -1, the peak dose in the innermost magnet insulator ranges from 20 to 35 MGy. Dynamic heat loads to the triplet magnet cold mass are calculated to evaluate the cryogenic capability. In general, FLUKA and MARS results are in a very good agreement. △ Less

Submitted 29 January, 2015; originally announced January 2015.

Comments: 4 pp. Presented paper at the 5th International Particle Accelerator Conference, June 15 -20, 2014, Dresden, Germany

Report number: Fermilab-Conf-14-174-APC

Upgrades Of the SPS, Transfer Line and LHC Injection Protection Devices For the HL-LHC Era

Authors: Ö. Mete, O. Aberle, F. Cerutti, K. Cornelis, B. Goddard, V. Kain, R. Losito, F. L. Maciariello, M. Meddahi, J. Uythoven, F. M. Velotti, E. Gianfelice-Wendt, A. Mereghetti

Abstract: The challenging High Luminosity LHC (HL-LHC) beam requirements will lead in the future to unprecedented beam parameters along the LHC injector chain. In the SPS accelerator these requests translate into about a factor two higher intensity and brightness than the present design performance. In addition to the challenge of producing and accelerating such beams, these parameters affect the resistance… ▽ More The challenging High Luminosity LHC (HL-LHC) beam requirements will lead in the future to unprecedented beam parameters along the LHC injector chain. In the SPS accelerator these requests translate into about a factor two higher intensity and brightness than the present design performance. In addition to the challenge of producing and accelerating such beams, these parameters affect the resistance of the existing equipment against beam impact. Most of the protection devices in the SPS ring, its transfer lines and the LHC injection areas will be put under operational constraints which are beyond their design specification. The equipment concerned has been reviewed and their resistance to the HL-LHC beams checked. Theoretical and simulation studies have been performed for the SPS beam scraping system, the protection devices and the dump absorbers of the SPS-to-LHC transfer lines, as well as for the LHC injection protection devices. The first results of these studies are reported, together with the future prospects. △ Less

Submitted 19 September, 2014; originally announced September 2014.

Comments: 3 p. Presented at 4th International Particle Accelerator Conference (IPAC 2013)

Report number: FERMILAB-CONF-13-174-APC

Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider

Authors: R. Bruce, R. W. Assmann, V. Boccone, C. Bracco, M. Brugger, M. Cauchi, F. Cerutti, D. Deboy, A. Ferrari, L. Lari, A. Marsili, A. Mereghetti, D. Mirarchi, E. Quaranta, S. Redaelli, G. Robert-Demolaize, A. Rossi, B. Salvachua, E. Skordis, C. Tambasco, G. Valentino, T. Weiler, V. Vlachoudis, D. Wollmann

Abstract: The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010--2013, the LHC was routinely storing protons at 3.5--4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordi… ▽ More The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010--2013, the LHC was routinely storing protons at 3.5--4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordinary demands on the control of beam losses. An un-controlled loss of even a tiny fraction of the beam could cause a superconducting magnet to undergo a transition into a normal-conducting state, or in the worst case cause material damage. Hence a multi-stage collimation system has been installed in order to safely intercept high-amplitude beam protons before they are lost elsewhere. To guarantee adequate protection from the collimators, a detailed theoretical understanding is needed. This article presents results of numerical simulations of the distribution of beam losses around the LHC that have leaked out of the collimation system. The studies include tracking of protons through the fields of more than 5000 magnets in the 27 km LHC ring over hundreds of revolutions, and Monte-Carlo simulations of particle-matter interactions both in collimators and machine elements being hit by escaping particles. The simulation results agree typically within a factor 2 with measurements of beam loss distributions from the previous LHC run. Considering the complex simulation, which must account for a very large number of unknown imperfections, and in view of the total losses around the ring spanning over 7 orders of magnitude, we consider this an excellent agreement. Our results give confidence in the simulation tools, which are used also for the design of future accelerators. △ Less

Submitted 10 September, 2014; originally announced September 2014.

Journal ref: Phys. Rev. ST Accel. Beams 17, 081004 (2014)

GEANT4 simulation of the neutron background of the C$_6$D$_6$ set-up for capture studies at n_TOF

Authors: n_TOF collaboration, :, P. Žugec, N. Colonna, D. Bosnar, S. Altstadt, J. Andrzejewski, L. Audouin, M. Barbagallo, V. Bécares, F. Bečvář, F. Belloni, E. Berthoumieux, J. Billowes, V. Boccone, M. Brugger, M. Calviani, F. Calviño, D. Cano-Ott, C. Carrapiço, F. Cerutti, E. Chiaveri, M. Chin, G. Cortés, M. A. Cortés-Giraldo , et al. (83 additional authors not shown)

Abstract: The neutron sensitivity of the C$_6$D$_6$ detector setup used at n_TOF for capture measurements has been studied by means of detailed GEANT4 simulations. A realistic software replica of the entire n_TOF experimental hall, including the neutron beam line, sample, detector supports and the walls of the experimental area has been implemented in the simulations. The simulations have been analyzed in t… ▽ More The neutron sensitivity of the C$_6$D$_6$ detector setup used at n_TOF for capture measurements has been studied by means of detailed GEANT4 simulations. A realistic software replica of the entire n_TOF experimental hall, including the neutron beam line, sample, detector supports and the walls of the experimental area has been implemented in the simulations. The simulations have been analyzed in the same manner as experimental data, in particular by applying the Pulse Height Weighting Technique. The simulations have been validated against a measurement of the neutron background performed with a $^\mathrm{nat}$C sample, showing an excellent agreement above 1 keV. At lower energies, an additional component in the measured $^\mathrm{nat}$C yield has been discovered, which prevents the use of $^\mathrm{nat}$C data for neutron background estimates at neutron energies below a few hundred eV. The origin and time structure of the neutron background have been derived from the simulations. Examples of the neutron background for two different samples are demonstrating the important role of accurate simulations of the neutron background in capture cross section measurements. △ Less

Submitted 26 June, 2014; originally announced June 2014.

Journal ref: P. Zugec, N. Colonna, D. Bosnar et al., Nucl. Instrum. Methods A 760, 57 (2014)

Parton distributions: determining probabilities in a space of functions

Authors: The NNPDF Collaboration, Richard D. Ball, Valerio Bertone, Francesco Cerutti, Luigi Del Debbio, Stefano Forte, Alberto Guffanti, Jose I. Latorre, Juan Rojo, Maria Ubiali

Abstract: We discuss the statistical properties of parton distributions within the framework of the NNPDF methodology. We present various tests of statistical consistency, in particular that the distribution of results does not depend on the underlying parametrization and that it behaves according to Bayes' theorem upon the addition of new data. We then study the dependence of results on consistent or incon… ▽ More We discuss the statistical properties of parton distributions within the framework of the NNPDF methodology. We present various tests of statistical consistency, in particular that the distribution of results does not depend on the underlying parametrization and that it behaves according to Bayes' theorem upon the addition of new data. We then study the dependence of results on consistent or inconsistent datasets and present tools to assess the consistency of new data. Finally we estimate the relative size of the PDF uncertainty due to data uncertainties, and that due to the need to infer a functional form from a finite set of data. △ Less

Submitted 9 October, 2011; originally announced October 2011.

Comments: 11 pages, 8 figures, presented by Stefano Forte at PHYSTAT 2011 (to be published in the proceedings)

Report number: IFUM-988-FT, TTK-11-48

The UA9 experimental layout

Authors: W. Scandale, G. Arduini, R. Assmann, C. Bracco, F. Cerutti, J. Christiansen, S. Gilardoni, E. Laface, R. Losito, A. Masi, E. Metral, D. Mirarchi, S. Montesano, V. Previtali, S. Redaelli, G. Valentino, P. Schoofs, G. Smirnov, L. Tlustos, E. Bagli, S. Baricordi, P. Dalpiaz, V. Guidi, A. Mazzolari, D. Vincenzi , et al. (36 additional authors not shown)

Abstract: The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintill… ▽ More The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintillators, Gas Electron Multiplier chambers and other beam loss monitors measure nuclear loss rates induced by the interaction of the beam halo in the crystal. Roman pots are installed in the path of the deflected particles and are equipped with a Medipix detector to reconstruct the transverse distribution of the impinging beam. Finally UA9 takes advantage of an LHC-collimator prototype installed close to the Roman pot to help in setting the beam conditions and to analyze the efficiency to deflect the beam. This paper describes in details the hardware installed to study the crystal collimation during 2010. △ Less

Submitted 29 June, 2011; originally announced June 2011.

Comments: 15pages, 11 figure, submitted to JINST

The FLUKA code: present applications and future developments

Authors: A. Fasso', A. Ferrari, S. Roesler, J. Ranft, P. R. Sala, G. Battistoni, M. Campanella, F. Cerutti, L. De Biaggi, E. Gadioli, M. V. Garzelli, F. Ballarini, A. Ottolenghi, D. Scannicchio, M. Carboni, M. Pelliccioni, R. Villari, V. Andersen, A. Empl, K. Lee, L. Pinsky, T. N. Wilson, N. Zapp

Abstract: The main features of the FLUKA Monte Carlo code, which can deal with transport and interaction of electromagnetic and hadronic particles, are summarised. The physical models embedded in FLUKA are mentioned, as well as examples of benchmarking against experimental data. A short history of the code is provided and the following examples of applications are discussed in detail: prediction of calori… ▽ More The main features of the FLUKA Monte Carlo code, which can deal with transport and interaction of electromagnetic and hadronic particles, are summarised. The physical models embedded in FLUKA are mentioned, as well as examples of benchmarking against experimental data. A short history of the code is provided and the following examples of applications are discussed in detail: prediction of calorimetric performances, atmospheric neutrino flux calculations, dosimetry in atmosphere and radiobiology applications, including hadrontherapy and space radiation protection. Finally a few lines are dedicated to the FLUKA server, from which the code can be downloaded. △ Less

Submitted 23 June, 2003; originally announced June 2003.

Comments: talk from the 2003 Computing in High Energy and Nuclear Physics (CHEP03), La Jolla, Ca, USA, March 2003, 8 pages, pdf