-
Laminar forced convection characteristics in a round microchannel with shape uncertainty: effect of wall slip
Authors:
L. A. Sphaier,
A. Barletta,
M. Celli,
P. V. Brandao,
S. Lazzari,
E. Ghedini
Abstract:
The shape of a microchannel cross-section is usually affected by a significant uncertainty due to the small hydraulic diameter. Such an uncertainty is indeed present at any scale, but is amplified in smaller scales, becoming significantly important when the hydraulic diameter is smaller than some tenth micrometers. In this scenario, this paper is focused on analyzing the sensitivity of the heat an…
▽ More
The shape of a microchannel cross-section is usually affected by a significant uncertainty due to the small hydraulic diameter. Such an uncertainty is indeed present at any scale, but is amplified in smaller scales, becoming significantly important when the hydraulic diameter is smaller than some tenth micrometers. In this scenario, this paper is focused on analyzing the sensitivity of the heat and fluid flow characteristics with respect to the channel shape, considering a random modifications in the channel cross section. Forced convection in a fully developed regime with a wall slip is considered, and the analysis includes the evaluation of the Fanning friction factor and of the Nusselt number for the H1 thermal boundary condition, considering different slip-flow configurations, as dictated by the slip-length parameter. The heat and fluid flow problem is solved for one thousand randomly generated channel geometries, based on a circular microchannel which is allowed to have its boundary points move within 10\% of its nominal diameter. The calculated data for $f \Re$ and $\Nu$ are then analyzed, and compared with the nominal values (obtained for smooth channels). The results show that, on an average basis, the roughness effect has a tendency to reduce the Nusselt number while increasing the friction factor, however, with a small number of exceptions.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Shape uncertainty analysis of laminar forced convection in a round microchannel with viscous dissipation
Authors:
A. Barletta,
M. Celli,
L. A. Sphaier,
P. V. Brandao,
S. Lazzari,
E. Ghedini
Abstract:
The shape of a microchannel is usually affected by a significant uncertainty due to the small size of the cross-section, comparable with the typical wall-roughness length scale. Such an uncertainty is present at any scale, but it is definitely amplified and, hence, significantly important when the hydraulic diameter becomes smaller than some tenth micrometers. The focus of this paper is on the num…
▽ More
The shape of a microchannel is usually affected by a significant uncertainty due to the small size of the cross-section, comparable with the typical wall-roughness length scale. Such an uncertainty is present at any scale, but it is definitely amplified and, hence, significantly important when the hydraulic diameter becomes smaller than some tenth micrometers. The focus of this paper is on the numerical analysis of the sensitivity to shape random modification, within a prefixed maximum extent, of the main flow and heat transfer characteristics of fully-developed forced convection. The numerical solutions are carried out by employing a finite-element solver repeated over a statistical sample of randomly generated perimetral profiles that simulate the wall roughness. The study includes the evaluation of the Fanning friction factor and of the Nusselt number for the T, H1 and H2 thermal boundary conditions.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Dissipation instability of Couette-like adiabatic flows in a plane channel
Authors:
A. Barletta,
M. Celli,
S. Lazzari,
P. V. Brandão
Abstract:
The mixed convection flow in a plane channel with adiabatic boundaries is examined. The boundaries have an externally prescribed relative velocity defining a Couette-like setup for the flow. A stationary flow regime is maintained with a constant velocity difference between the boundaries, considered as thermally insulated. The effect of viscous dissipation induces a heat source in the flow domain…
▽ More
The mixed convection flow in a plane channel with adiabatic boundaries is examined. The boundaries have an externally prescribed relative velocity defining a Couette-like setup for the flow. A stationary flow regime is maintained with a constant velocity difference between the boundaries, considered as thermally insulated. The effect of viscous dissipation induces a heat source in the flow domain and, hence, a temperature gradient. The nonuniform temperature distribution causes, in turn, a buoyancy force and a combined forced and free flow regime. Dual mixed convection flows occur for a given velocity difference. Their structure is analysed where, in general, only one branch of the dual flows is compatible with the Oberbeck-Boussinesq approximation, for realistic values of the Gebhart number. A linear stability analysis of the basic stationary flows with viscous dissipation is carried out. The stability eigenvalue problem is solved numerically, leading to the determination of the neutral stability curves and the critical values of the Péclet number, for different Gebhart numbers. An analytical asymptotic solution in the special case of perturbations with infinite wavelength is also developed.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Viscous heating and instability of the adiabatic buoyant flows in a horizontal channel
Authors:
A. Barletta,
M. Celli,
D. A. S. Rees
Abstract:
The stability of buoyant flows occurring in the mixed convection regime for a viscous fluid in a horizontal plane-parallel channel with adiabatic walls is investigated. The basic flow features a parallel velocity field under stationary state conditions. There exists a duality of flows, for every prescribed value of the mass flow rate across the channel cross-section, caused by the combined actions…
▽ More
The stability of buoyant flows occurring in the mixed convection regime for a viscous fluid in a horizontal plane-parallel channel with adiabatic walls is investigated. The basic flow features a parallel velocity field under stationary state conditions. There exists a duality of flows, for every prescribed value of the mass flow rate across the channel cross-section, caused by the combined actions of viscous dissipation and of the buoyancy force. As pointed out in a previous study, only the primary branch of the dual solutions is compatible with the Oberbeck-Boussinesq approximation. Thus, the stability analysis will be focussed on the stability of such flows. The onset of the thermal instability with small-amplitude perturbations of the basic flow is investigated by assuming a very large Prandtl number, which is equivalent to a creeping flow regime. The neutral stability curves and the critical parametric conditions for the onset of instability are determined numerically.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
Gill's problem in a sandwiched porous slab
Authors:
Antonio Barletta,
Michele Celli,
Stefano Lazzari,
Pedro Vayssière Brandão
Abstract:
The classical Gill's stability problem for the stationary and parallel buoyant flow in a vertical porous slab with impermeable and isothermal boundaries kept at different temperatures is reconsidered in a different perspective. A three-layer slab is studied instead of a homogeneous slab as in Gill's problem. The three layers have a symmetric configuration where the two external layers have a high…
▽ More
The classical Gill's stability problem for the stationary and parallel buoyant flow in a vertical porous slab with impermeable and isothermal boundaries kept at different temperatures is reconsidered in a different perspective. A three-layer slab is studied instead of a homogeneous slab as in Gill's problem. The three layers have a symmetric configuration where the two external layers have a high thermal conductivity, while the core layer has a much lower conductivity. A simplified model is set up where the thermal conductivity ratio between the external layers and the internal core is assumed as infinite. It is shown that a flow instability in the sandwiched porous slab may arise with a sufficiently large Rayleigh number. It is also demonstrated that this instability coincides with that predicted in a previous analysis for a homogeneous porous layer with permeable boundaries, by considering the limiting case where the permeability of the external layers is much larger than that of the core layer.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
On the use and misuse of the Oberbeck-Boussinesq approximation
Authors:
A. Barletta,
M. Celli,
D. A. S. Rees
Abstract:
The Oberbeck-Boussinesq approximation is the most widely employed theoretical scheme for the study of natural or mixed convection flows. However, the misunderstanding of this approximated framework is a possibility that may cause the emergence of paradoxes or, at least, incorrect conclusions. In this note, the basic features of the Oberbeck-Boussinesq approximation are briefly recalled and three s…
▽ More
The Oberbeck-Boussinesq approximation is the most widely employed theoretical scheme for the study of natural or mixed convection flows. However, the misunderstanding of this approximated framework is a possibility that may cause the emergence of paradoxes or, at least, incorrect conclusions. In this note, the basic features of the Oberbeck-Boussinesq approximation are briefly recalled and three simple examples where this theoretical scheme may be misused are provided. Such misuses of the approximation lead to erroneous conclusions that, in the examples presented in this note, entail violations of the principle of mass conservation. A discussion about the Oberbeck-Boussinesq approximation as an asymptotic theory obtained by letting the product of the thermal expansion coefficient and the reference temperature difference tend to zero is also presented.
△ Less
Submitted 18 March, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
Effects of anisotropy on the transition to absolute instability in a porous medium heated from below
Authors:
Michele Celli,
Antonio Barletta
Abstract:
The emerging instability of a forced throughflow in a fluid saturated horizontal porous duct of rectangular cross section is investigated. The duct is heated from below by assuming the horizontal boundaries to be at different temperatures. Both the horizontal and the vertical boundaries are impermeable and the basic flow is parallel to such boundaries. The porous medium is anisotropic with differe…
▽ More
The emerging instability of a forced throughflow in a fluid saturated horizontal porous duct of rectangular cross section is investigated. The duct is heated from below by assuming the horizontal boundaries to be at different temperatures. Both the horizontal and the vertical boundaries are impermeable and the basic flow is parallel to such boundaries. The porous medium is anisotropic with different permeabilities in the vertical and horizontal directions. The effect of the anisotropy on the onset of the buoyancy driven modal instability and absolute instability is analysed. The parametric conditions leading to the instability of the basic flow are determined by employing an analytical dispersion relation. The different permeabilities in the vertical and horizontal directions come out to play opposite roles in the onset of modal instability and in the transition to absolute instability. It is shown that an increasing vertical permeability has a destabilising effect, while an increasing horizontal permeability has a stabilising effect.
△ Less
Submitted 12 January, 2022; v1 submitted 22 December, 2021;
originally announced December 2021.
-
Rayleigh-Bénard instability of an Ellis fluid saturating a porous medium
Authors:
Michele Celli,
Antonio Barletta,
Pedro V. Brandão
Abstract:
Unlike the power-law model, the Ellis model describes the apparent viscosity of a shear-thinning fluid with no singularity in the limit of a vanishingly small shear stress. In particular, this model matches the Newtonian behaviour when the shear stresses are very small. The emergence of the Rayleigh-Bénard instability is studied when a horizontal pressure gradient, yielding a basic throughflow, is…
▽ More
Unlike the power-law model, the Ellis model describes the apparent viscosity of a shear-thinning fluid with no singularity in the limit of a vanishingly small shear stress. In particular, this model matches the Newtonian behaviour when the shear stresses are very small. The emergence of the Rayleigh-Bénard instability is studied when a horizontal pressure gradient, yielding a basic throughflow, is prescribed in a horizontal porous layer. The threshold conditions for the linear instability of this system are obtained both analytically and numerically. In the case of a negligible flow rate, the onset of the instability occurs for the same parametric conditions reported in the literature for a Newtonian fluid saturating a porous medium. On the other hand, when high flow rates are considered, a negligibly small temperature difference imposed across the horizontal boundaries is sufficient to trigger the convective instability.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
On the stability of parallel flow in a vertical porous layer with annular cross-section
Authors:
A. Barletta,
M. Celli,
D. A. S. Rees
Abstract:
The linear stability of buoyant parallel flow in a vertical porous layer with an annular cross-section is investigated. The vertical cylindrical boundaries are kept at different uniform temperatures and they are assumed to be impermeable. The emergence of linear instability by convection cells is excluded on the basis of a numerical solution of the linearised governing equations. This result exten…
▽ More
The linear stability of buoyant parallel flow in a vertical porous layer with an annular cross-section is investigated. The vertical cylindrical boundaries are kept at different uniform temperatures and they are assumed to be impermeable. The emergence of linear instability by convection cells is excluded on the basis of a numerical solution of the linearised governing equations. This result extends to the annular geometry the well-known Gill's theorem regarding the impossibility of convective instability in a vertical porous plane slab whose boundaries are impermeable and isothermal with different temperatures. The extension of Gill's theorem to the annular domain is approached numerically by evaluating the growth rate of normal mode perturbations and showing that its sign is negative, which means asymptotic stability of the basic flow. A concurring argument supporting the absence of linear instability arises from the investigation of cases where the impermeability condition at the vertical boundaries is relaxed and a partial permeability is modelled through Robin boundary conditions for the pressure. With partially permeable boundaries, an instability emerges which takes the form of axisymmetric normal modes.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Buoyant flow and instability in a vertical cylindrical porous slab with permeable boundaries
Authors:
A. Barletta,
M. Celli,
D. A. S. Rees
Abstract:
The basic stationary buoyant flow in a vertical annular porous passage induced by a boundary temperature difference is investigated. The vertical cylindrical boundaries are considered both isothermal and permeable to external fluid reservoirs. There exists a stationary parallel velocity field with a zero flow rate and pure conduction heat transfer. Its linear stability is analysed with normal mode…
▽ More
The basic stationary buoyant flow in a vertical annular porous passage induced by a boundary temperature difference is investigated. The vertical cylindrical boundaries are considered both isothermal and permeable to external fluid reservoirs. There exists a stationary parallel velocity field with a zero flow rate and pure conduction heat transfer. Its linear stability is analysed with normal mode perturbations of the pressure and temperature fields. The transition to convective instability is caused by the basic horizontal temperature gradient. Hence, its nature differs from that of the usual Rayleigh-Bénard instability. The linear dynamics of the perturbed flow is formulated as an eigenvalue problem, solved numerically. Its solution provides the neutral stability curve at each fixed aspect ratio between the external radius and the internal radius. The critical Rayleigh number triggering the instability is evaluated for different aspect ratios. It is shown that the system becomes more an more unstable as the aspect ratio increases, with the critical Rayleigh number dropping to zero when the aspect ratio tends to infinity.
△ Less
Submitted 9 February, 2020;
originally announced February 2020.
-
Dynamics of hydrogen guests in ice XVII nanopores
Authors:
Leonardo del Rosso,
Milva Celli,
Daniele Colognesi,
Svemir Rudic,
Niall J. English,
Christian J. Burnham,
Lorenzo Ulivi
Abstract:
The present high-resolution inelastic neutron scattering experiment on ice XVII, containing molecular hydrogen with different ortho/para ratio, allows to assign the H$_2$ motion spectral bands to rotational and center-of-mass translational transitions of either {\it para}- or {\it ortho}-H$_2$. Due to its structure, ice XVII confines H$_2$ molecules to move in spiral channels of molecular size. Re…
▽ More
The present high-resolution inelastic neutron scattering experiment on ice XVII, containing molecular hydrogen with different ortho/para ratio, allows to assign the H$_2$ motion spectral bands to rotational and center-of-mass translational transitions of either {\it para}- or {\it ortho}-H$_2$. Due to its structure, ice XVII confines H$_2$ molecules to move in spiral channels of molecular size. Reported data demonstrate that H$_2$ molecules rotate almost freely in these nanometric channels, though showing larger perturbation than in clathrate hydrates, and perform a translational motion exhibiting two low frequency excitations. The good agreement between experimental spectra and corresponding molecular dynamics results clearly enables to portray a picture of the confined motions of a hydrophobic guest within a metastable ice framework, i.e. ice XVII.
△ Less
Submitted 17 November, 2017; v1 submitted 28 June, 2017;
originally announced June 2017.
-
New porous water ice metastable at atmospheric pressure obtained by emptying a hydrogen filled ice
Authors:
Leonardo del Rosso,
Milva Celli,
Lorenzo Ulivi
Abstract:
The properties of some forms of water ice reserve still intriguing surprises. Besides the several stable or metastable phases of pure ice, solid mixtures of water with gases are precursors of other ices, since in some cases they may be emptied, leaving a metastable hydrogen bound water structure. We present here the first characterization of a new form of ice, obtained from the crystalline solid c…
▽ More
The properties of some forms of water ice reserve still intriguing surprises. Besides the several stable or metastable phases of pure ice, solid mixtures of water with gases are precursors of other ices, since in some cases they may be emptied, leaving a metastable hydrogen bound water structure. We present here the first characterization of a new form of ice, obtained from the crystalline solid compound of water and molecular hydrogen called C$_0$ filled ice. By means of Raman spectroscopy, we measure the hydrogen release at different temperatures, and succeed in rapidly removing all the hydrogen molecules, obtaining a new form of ice (ice XVII). Its structure is determined by means of neutron diffraction measurements. Of paramount interest is that the emptied crystal can adsorb again hydrogen and release it repeatedly, showing a temperature dependent hysteresis.
△ Less
Submitted 5 October, 2016; v1 submitted 26 July, 2016;
originally announced July 2016.
-
Velocity autocorrelation in liquid para-hydrogen by quantum simulations for first-principle computations of the neutron cross sections
Authors:
E. Guarini,
M. Neumann,
U. Bafile,
M. Celli,
D. Colognesi,
E. Farhi,
Y. Calzavara
Abstract:
Accurate knowledge of the single-molecule (self) translational dynamics of liquid para-H2 is an essential requirement for the calculation of the neutron scattering properties of this important quantum liquid. We show that, by using Centroid Molecular Dynamics (CMD) quantum simulations of the velocity autocorrelation function, calculations of the total neutron cross section (TCS) remarkably agree w…
▽ More
Accurate knowledge of the single-molecule (self) translational dynamics of liquid para-H2 is an essential requirement for the calculation of the neutron scattering properties of this important quantum liquid. We show that, by using Centroid Molecular Dynamics (CMD) quantum simulations of the velocity autocorrelation function, calculations of the total neutron cross section (TCS) remarkably agree with experimental data at the thermal and epithermal incident neutron energies where para-H2 dynamics is actually dominated by the self contributions. This result shows that a proper account of the quantum nature of the fluid, as provided by CMD, is a necessary and very effective condition to obtain the correct absolute-scale cross section values directly from first-principle computations of the double differential cross section, and without the need of introducing any empirically adjusted quantity. At subthermal incident energies, appropriate modeling of the para-H2 intermolecular (distinct) dynamics also becomes crucial, but quantum simulations are not yet able to cope with it. Existing simple models which account for the distinct part provide an appropriate correction of self-only calculations and bring the computed results in reasonable accord with TCS experimental data available until very recently. However, if just published cross section measurements in the cold range are considered, the agreement turns out to be by far superior and very satisfactory. The possible origin of slight residual differences will be commented and suggest further computational and experimental efforts. Nonetheless, the ability to reproduce the total cross section in the wide range between 1 and 900 meV represents an encouraging and important validation step of the CMD method and of the present simple algorithm.
△ Less
Submitted 14 May, 2015;
originally announced May 2015.
