Showing 1–47 of 47 results for author: Castellanos-Gomez, A

Enhanced Strain Transfer and Optoelectronic Performance in MoS2 Devices via Formvar Encapsulation

Authors: Simeon N. Vladimirov, Onur Cakiroglu, Carmen Munuera, Andres Castellanos-Gomez, Thiago L. Vasconcelos

Abstract: We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation s… ▽ More We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation significantly enhances the mechanical and thermal strain gauge factors by approximately 2-fold (up to ~-50 meV/%) and 6-fold (up to ~-1.5 meV/°C), respectively, while PC shows a slightly lower enhancement. Moreover, all three polymers increase the maximum achievable strain from approximately 1.4% to 2.3%. Furthermore, devices fabricated on PP substrates exhibit improved optoelectronic performance when encapsulated with PVFM, including increased and faster photocurrent response and extended device lifetime. △ Less

Submitted 9 June, 2025; originally announced June 2025.

Comments: 4 figures

Journal ref: 2D Mater. 12 025013 (2025)

Direct laser ablation of 2D material films for fabricating multi-functional flexible and transparent devices

Authors: Yigit Sozen, Yu Kyoung Ryu, Javier Martinez, Andres Castellanos-Gomez

Abstract: We present a scalable method for direct patterning of graphite and transition metal dichalcogenide (TMD) films on polycarbonate (PC) and other transparent substrates using fiber laser ablation. This process facilitates the fabrication of various functional devices, including strain gauges, supercapacitors, and photodetector arrays, without the need for photolithography or solvents, thereby simplif… ▽ More We present a scalable method for direct patterning of graphite and transition metal dichalcogenide (TMD) films on polycarbonate (PC) and other transparent substrates using fiber laser ablation. This process facilitates the fabrication of various functional devices, including strain gauges, supercapacitors, and photodetector arrays, without the need for photolithography or solvents, thereby simplifying device production and enhancing environmental sustainability. Utilizing roll-to-roll mechanical exfoliation, homogeneous nanosheet films are created and then patterned with a laser engraving system. Electrical and optical characterization confirms that the laser-processed films maintain their crystallinity, with no observable damage to the underlying substrate. We demonstrate the scalability of this approach by constructing a WSe2/graphite photodetector array on PC, which exhibits high sensitivity, low noise, and uniform photocurrent response across its active channels. As a proof-of-concept, this array is used as an image sensor to capture light patterns, showcasing its potential for flexible and semi-transparent imaging applications. These findings open up new avenues for incorporating all-van der Waals devices into wearable electronics, optoelectronics, and imaging technologies. △ Less

Submitted 4 June, 2025; originally announced June 2025.

Comments: 31 pages, 7 figures

Journal ref: Advanced Functional Materials, 2507458 (2025)

Natural layered phlogopite dielectric for ultrathin two-dimensional optoelectronics

Authors: Thomas Pucher, Julia Hernandez-Ruiz, Guillermo Tajuelo-Castilla, José Ángel Martín-Gago, Carmen Munuera, Andres Castellanos-Gomez

Abstract: The integration of high-dielectric-constant (high-$κ$) materials with two-dimensional (2D) semiconductors is promising to overcome performance limitations and reach their full theoretical potential. Here we show that naturally occurring phlogopite mica, exfoliated into ultrathin flakes, can serve as a robust high-$κ$ dielectric layer for transition metal dichalcogenide-based 2D electronics and opt… ▽ More The integration of high-dielectric-constant (high-$κ$) materials with two-dimensional (2D) semiconductors is promising to overcome performance limitations and reach their full theoretical potential. Here we show that naturally occurring phlogopite mica, exfoliated into ultrathin flakes, can serve as a robust high-$κ$ dielectric layer for transition metal dichalcogenide-based 2D electronics and optoelectronics. Phlogopite's wide bandgap (~4.8 eV), high dielectric constant (~11), and large breakdown field (10 MVcm$^{-1}$) enable transistors with subthreshold swings down to 100 mVdec$^{-1}$, minimal hysteresis (30-60 mV) and interface trap densities comparable to state-of-the-art oxide dielectrics. Moreover, phototransistors built upon monolayer molybdenum disulfide (MoS$_2$) and phlogopite exhibit responsivities up to 3.3x10$^{4}$ AW$^{-1}$ and detectivities near 10$^{10}$ Jones, surpassing devices based on conventional gate insulators. We further demonstrate the versatility of this natural dielectric by integrating phlogopite/MoS$_2$ heterostructures into NMOS inverters, showcasing robust voltage gains and low-voltage operation. Our findings establish phlogopite as a promising, earth-abundant dielectric for next-generation 2D transistor technologies and high-performance photodetection. △ Less

Submitted 14 May, 2025; originally announced May 2025.

Strain Engineering of Magnetoresistance and Magnetic Anisotropy in CrSBr

Authors: Eudomar Henríquez-Guerra, Alberto M. Ruiz, Marta Galbiati, Alvaro Cortes-Flores, Daniel Brown, Esteban Zamora-Amo, Lisa Almonte, Andrei Shumilin, Juan Salvador-Sánchez, Ana Pérez-Rodríguez, Iñaki Orue, Andrés Cantarero, Andres Castellanos-Gomez, Federico Mompeán, Mar Garcia-Hernandez, Efrén Navarro-Moratalla, Enrique Díez, Mario Amado, José J. Baldoví, M. Reyes Calvo

Abstract: Tailoring magnetoresistance and magnetic anisotropy in van der Waals magnetic materials is essential for advancing their integration into technological applications. In this regard, strain engineering has emerged as a powerful and versatile strategy to control magnetism at the two-dimensional (2D) limit. Here, we demonstrate that compressive biaxial strain significantly enhances the magnetoresista… ▽ More Tailoring magnetoresistance and magnetic anisotropy in van der Waals magnetic materials is essential for advancing their integration into technological applications. In this regard, strain engineering has emerged as a powerful and versatile strategy to control magnetism at the two-dimensional (2D) limit. Here, we demonstrate that compressive biaxial strain significantly enhances the magnetoresistance and magnetic anisotropy of few-layer CrSBr flakes. Strain is efficiently transferred to the flakes from the thermal compression of a polymeric substrate upon cooling, as confirmed by temperature-dependent Raman spectroscopy. This strain induces a remarkable increase in the magnetoresistance ratio and in the saturation fields required to align the magnetization of CrSBr along each of its three crystalographic directions, reaching a twofold enhancement along the magnetic easy axis. This enhancement is accompanied by a subtle reduction of the Néel temperature by ~10K. Our experimental results are fully supported by first-principles calculations, which link the observed effects to a strain-driven modification in interlayer exchange coupling and magnetic anisotropy energy. These findings establish strain engineering as a key tool for fine-tuning magnetotransport properties in 2D magnetic semiconductors, paving the way for implementation in spintronics and information storage devices. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Pencil and Paper Electronics: An Accessible Approach to Teaching Basic Physics Concepts

Authors: Pablo Bastante, Andres Castellanos-Gomez

Abstract: This teaching article describes a simple and low-cost methodology for studying electrical transport and constructing basic sensor devices using everyday stationery items, including pencils, paper, and a handheld multimeter. The approach is designed for high school and undergraduate teachers and offers an easy-to-implement, hands-on method for teaching fundamental concepts in physical electronics.… ▽ More This teaching article describes a simple and low-cost methodology for studying electrical transport and constructing basic sensor devices using everyday stationery items, including pencils, paper, and a handheld multimeter. The approach is designed for high school and undergraduate teachers and offers an easy-to-implement, hands-on method for teaching fundamental concepts in physical electronics. The materials and experiments outlined in this article are widely accessible and can be easily replicated in various teaching labs, even with limited budgets. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Paper-based Flexible Supercapacitors with drawn van der Waals materials

Authors: Bahare Nouri, Andres Castellanos-Gomez, Foad Ghasemi

Abstract: Two-dimensional (2D) materials are widely used in various applications due to their extraordinary properties. In particular, their electrochemical stability, low electrical resistance, and huge specific surface area make them very interesting active materials for supercapacitors. Herein, flexible, biodegradable, and low-cost supercapacitors are introduced in a very simple way based on hand-drawing… ▽ More Two-dimensional (2D) materials are widely used in various applications due to their extraordinary properties. In particular, their electrochemical stability, low electrical resistance, and huge specific surface area make them very interesting active materials for supercapacitors. Herein, flexible, biodegradable, and low-cost supercapacitors are introduced in a very simple way based on hand-drawing pencil traces or -rubbing molybdenum disulfide (MoS2), titanium trisulfide (TiS3) and franckeite traces on the paper. Results demonstrate that pencil-drawn paper has higher capacitance performance (~6.39 F/g) among the suggested electrodes. Interestingly, the introduced MoS2/pencil, TiS3/pencil, and franckeite/pencil drawn paper electrodes reveal dramatic improvements with long cyclic life thanks to the occurrence of synergetic effects and higher available active cites within the heterostructures. Moreover, the assembled symmetric solid-state supercapacitors retain their performance even under applied bending, indicating their excellent potential for wearable/flexible applications. △ Less

Submitted 18 January, 2023; originally announced January 2023.

An automated system for strain engineering and straintronics of 2D materials

Authors: Onur Çakıroğlu, Joshua O. Island, Yong Xie, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: This work presents an automated three-point bending apparatus that can be used to study strain engineering and straintronics in two-dimensional materials. We benchmark the system by reporting reproducible strain tuned micro-reflectance, Raman, and photoluminescence spectra for monolayer molybdenum disulfide (MoS2). These results are in good agreement with reported literature using conventional ben… ▽ More This work presents an automated three-point bending apparatus that can be used to study strain engineering and straintronics in two-dimensional materials. We benchmark the system by reporting reproducible strain tuned micro-reflectance, Raman, and photoluminescence spectra for monolayer molybdenum disulfide (MoS2). These results are in good agreement with reported literature using conventional bending apparatus. We further utilize the system to automate strain investigations of straintronic devices by measuring the piezoresistive effect and the strain effect on photoresponse in an MoS2 electrical device. The details of the construction of the straightforward system are given and we anticipate it can be easily implemented for study of strain engineering and straintronics in a wide variety of 2D material systems. △ Less

Submitted 17 October, 2022; originally announced October 2022.

Chip-integrated van der Waals PN heterojunction photodetector with low dark current and high responsivity

Authors: Ruijuan Tian, Xuetao Gan, Chen Li, Xiaoqing Chen, Siqi Hu, Linpeng Gu, Dries Van Thourhout, Andres Castellanos-Gomez, Zhipei Sun, Jianlin Zhao

Abstract: Two-dimensional materials are attractive for constructing high-performance photonic chip-integrated photodetectors because of their remarkable electronic and optical properties and dangling-bond-free surfaces. However, the reported chip-integrated two-dimensional material photodetectors were mainly implemented with the configuration of metal-semiconductor-metal, suffering from high dark currents a… ▽ More Two-dimensional materials are attractive for constructing high-performance photonic chip-integrated photodetectors because of their remarkable electronic and optical properties and dangling-bond-free surfaces. However, the reported chip-integrated two-dimensional material photodetectors were mainly implemented with the configuration of metal-semiconductor-metal, suffering from high dark currents and low responsivities at high operation speed. Here, we report a van der Waals PN heterojunction photodetector, composed of p-type black phosphorous and n-type molybdenum telluride, integrated on a silicon nitride waveguide. The built-in electric field of the PN heterojunction significantly suppresses the dark current and improves the responsivity. Under a bias of 1 V pointing from n-type molybdenum telluride to p-type black phosphorous, the dark current is lower than 7 nA, which is more than two orders of magnitude lower than those reported in other waveguide-integrated black phosphorus photodetectors. An intrinsic responsivity up to 577 mA/W is obtained. Remarkably, the van der Waals PN heterojunction is tunable by the electrostatic doping to further engineer its rectification and improve the photodetection, enabling an increased responsivity of 709 mA/W. Besides, the heterojunction photodetector exhibits a response bandwidth of ~1.0 GHz and a uniform photodetection over a wide spectral range, as experimentally measured from 1500 to 1630 nm. The demonstrated chip-integrated van der Waals PN heterojunction photodetector with low dark current, high responsivity and fast response has great potentials to develop high-performance on-chip photodetectors for various photonic integrated circuits based on silicon, lithium niobate, polymer, etc. △ Less

Submitted 7 June, 2022; originally announced June 2022.

Broadband-tunable spectral response of perovskite-on-paper photodetectors using halide mixing

Authors: Alvaro J. Magdaleno, Riccardo Frisenda, Ferry Prins, Andres Castellanos-Gomez

Abstract: Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In th… ▽ More Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-fabricate perovskite-on-paper photodetectors with a broadband-tunable spectral response. From the bandgap tunability of halide-mixed perovskites we create photodetectors with a cut-off spectral onset that ranges from the NIR to the green, by increasing the bromide content on MAPb(I$_{1-x}$Br$_x$)$_3$ perovskite alloys. The devices show a fast and efficient response. The best performances are observed for the pure I and Br perovskite compositions, with a maximum responsivity of 376 mA/W on the MAPbBr$_3$ device. This study provides an example of the wide range of possibilities that the combination of solution processable materials with paper substrates offer for the development of low-cost, biodegradable and easy-to-fabricate devices. △ Less

Submitted 19 May, 2022; originally announced May 2022.

Comments: 3 main text figures, 8 supp info figures

In-plane anisotropic optical and mechanical properties of two-dimensional MoO$_3$

Authors: Sergio Puebla, Roberto D'Agosta, Gabriel Sanchez-Santolino, Riccardo Frisenda, Carmen Munuera, Andres Castellanos-Gomez

Abstract: Molybdenum trioxide (MoO$_3$) in-plane anisotropy has increasingly attracted the attention of the scientific community in the last few years. Many of the observed in-plane anisotropic properties stem from the anisotropic refractive index and elastic constants of the material but a comprehensive analysis of these fundamental properties is still lacking. Here we employ Raman and micro-reflectance me… ▽ More Molybdenum trioxide (MoO$_3$) in-plane anisotropy has increasingly attracted the attention of the scientific community in the last few years. Many of the observed in-plane anisotropic properties stem from the anisotropic refractive index and elastic constants of the material but a comprehensive analysis of these fundamental properties is still lacking. Here we employ Raman and micro-reflectance measurements, using polarized light, to determine the angular dependence of the refractive index of thin MoO$_3$ flakes and we study the directional dependence of the MoO$_3$ Young's modulus using the buckling metrology method. We found that MoO$_3$ displays one of the largest in-plane anisotropic mechanical properties reported for 2D materials so far. △ Less

Submitted 7 May, 2021; originally announced May 2021.

Comments: 4 figures in main text. 6 figures in supp. info

Journal ref: npj 2D Mater Appl 5, 37 (2021)

Optical microscopy-based thickness estimation in thin GaSe flakes

Authors: Wenliang Zhang, Qinghua Zhao, Sergio Puebla, Tao Wang, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: We have implemented three different optical methods to quantitatively assess the thickness of thin GaSe flakes transferred on both transparent substrates, like Gel-Film, or SiO2/Si substrates. We show how their apparent color can be an efficient way to make a quick rough estimation of the thickness of the flakes. This method is more effective for SiO2/Si substrates as the thickness dependent color… ▽ More We have implemented three different optical methods to quantitatively assess the thickness of thin GaSe flakes transferred on both transparent substrates, like Gel-Film, or SiO2/Si substrates. We show how their apparent color can be an efficient way to make a quick rough estimation of the thickness of the flakes. This method is more effective for SiO2/Si substrates as the thickness dependent color change is more pronounced on these substrates than on transparent substrates. On the other hand, for transparent substrates, the transmittance of the flakes in the blue region of the visible spectrum can be used to estimate the thickness. We find that the transmittance of flakes in the blue part of the spectrum decreases at a rate of 1.2%/nm. On SiO2/Si, the thickness of the flakes can be accurately determined by fitting optical contrast spectra to a Fresnel law-based model. Finally, we also show how the quantitative analysis of transmission mode optical microscopy images can be a powerful method to quickly probe the environmental degradation of GaSe flakes exposed to aging conditions. △ Less

Submitted 7 May, 2021; originally announced May 2021.

Comments: 5 figures

Journal ref: Materials Today Advances, 10, 100143, 2021

Integrating van der Waals materials on paper substrates for electrical and optical applications

Authors: Wenliang Zhang, Qinghua Zhao, Carmen Munuera, Martin Lee, Eduardo Flores, João E. F. Rodrigues, Jose R. Ares, Carlos Sanchez, Javier Gainza, Herre S. J. van der Zant, José A. Alonso, Isabel J. Ferrer, Tao Wang, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (v… ▽ More Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (vdW) materials, many research groups have worked towards the integration of vdW materials-based devices on paper. Recently, a method to deposit a continuous film of densely packed interconnects of vdW materials on paper by simply rubbing the vdW crystals against the rough surface of paper has been presented. This method utilizes the weak interlayer vdW interactions and allows cleaving of the crystals into micro platelets through the abrasion against the paper. Here, we aim to illustrate the general character and the potential of this technique by fabricating films of 39 different vdW materials (including superconductors, semi-metals, semiconductors, and insulators) on standard copier paper. We have thoroughly characterized their optical properties showing their high optical quality: one can easily resolve the absorption band edge of semiconducting vdW materials and even the excitonic features present in some vdW materials with high exciton binding energy. We also measured the electrical resistivity for several vdW materials films on paper finding exceptionally low values, which are in some cases, orders of magnitude lower than those reported for analogous films produced by inkjet printing. We finally demonstrate the fabrication of field-effect devices with vdW materials on paper using the paper substrate as an ionic gate. △ Less

Submitted 7 May, 2021; originally announced May 2021.

Comments: 4 figures in main text, 21 figures in Supp. Info

Journal ref: Applied Materials Today, 23, 101012, 2021

Biaxial versus uniaxial strain tuning of single-layer MoS$_2$

Authors: Felix Carrascoso, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Strain engineering has arisen as a powerful technique to tune the electronic and optical properties of two-dimensional semiconductors like molybdenum disulfide (MoS2). Although several theoretical works predicted that biaxial strain would be more effective than uniaxial strain to tune the band structure of MoS2, a direct experimental verification is still missing in the literature. Here we impleme… ▽ More Strain engineering has arisen as a powerful technique to tune the electronic and optical properties of two-dimensional semiconductors like molybdenum disulfide (MoS2). Although several theoretical works predicted that biaxial strain would be more effective than uniaxial strain to tune the band structure of MoS2, a direct experimental verification is still missing in the literature. Here we implemented a simple experimental setup that allows to apply biaxial strain through the bending of a cruciform polymer substrate. We used the setup to study the effect of biaxial strain on the differential reflectance spectra of 12 single-layer MoS2 flakes finding a redshift of the excitonic features at a rate between -40 meV/% and -110 meV/% of biaxial tension. We also directly compare the effect of biaxial and uniaxial strain on the same single-layer MoS2 finding that the biaxial strain gauge factor is 2.3 times larger than the uniaxial strain one. △ Less

Submitted 7 May, 2021; v1 submitted 21 December, 2020; originally announced December 2020.

Comments: 5 figures + 1 table in the main text. 6 figures in the supp. info

Drawing WS2 thermal sensors on paper substrates

Authors: Martin Lee, Ali Mazaheri, Herre S. J. van der Zant, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Paper based thermoresistive sensors are fabricated by rubbing WS2 powder against a piece of standard copier paper, like the way a pencil is used to write on paper. The abrasion between the layered material and the rough paper surface erodes the material, breaking the weak van der Waals interlayer bonds, yielding a film of interconnected platelets. The resistance of WS2 presents a strong temperatur… ▽ More Paper based thermoresistive sensors are fabricated by rubbing WS2 powder against a piece of standard copier paper, like the way a pencil is used to write on paper. The abrasion between the layered material and the rough paper surface erodes the material, breaking the weak van der Waals interlayer bonds, yielding a film of interconnected platelets. The resistance of WS2 presents a strong temperature dependence, as expected for a semiconductor material in which charge transport is due to thermally activated carriers. This strong temperature dependence makes the paper supported WS2 devices extremely sensitive to small changes in temperature. This exquisite thermal sensitivity, and their fast response times to sudden temperature changes, is exploited thereby demonstrating the usability of a WS2-on-paper thermal sensor in a respiration monitoring device. △ Less

Submitted 24 October, 2020; originally announced October 2020.

Comments: 6 main text figures, 1 table, 6 supp. info. figures

Naturally occurring van der Waals materials

Authors: Riccardo Frisenda, Yue Niu, Patricia Gant, Manuel Muñoz, Andres Castellanos-Gomez

Abstract: The exfoliation of two naturally occurring van der Waals minerals, graphite and molybdenite, arouse an unprecedented level of interest by the scientific community and shaped a whole new field of research: 2D materials research. Several years later, the family of van der Waals materials that can be exfoliated to isolate 2D materials keeps growing, but most of them are synthetic. Interestingly, in n… ▽ More The exfoliation of two naturally occurring van der Waals minerals, graphite and molybdenite, arouse an unprecedented level of interest by the scientific community and shaped a whole new field of research: 2D materials research. Several years later, the family of van der Waals materials that can be exfoliated to isolate 2D materials keeps growing, but most of them are synthetic. Interestingly, in nature plenty of naturally occurring van der Waals minerals can be found with a wide range of chemical compositions and crystal structures whose properties are mostly unexplored so far. This Perspective aims to provide an overview of different families of van der Waals minerals to stimulate their exploration in the 2D limit. △ Less

Submitted 24 October, 2020; originally announced October 2020.

Comments: Perspective article. 34 pages, 10 figures, 1 table, more than 170 references

Journal ref: npj 2D Mater Appl 4, 38 (2020)

Long-Term Stabilization of Two-Dimensional Perovskites by Encapsulation with Hexagonal Boron Nitride

Authors: Michael Seitz, Patricia Gant, Andres Castellanos-Gomez, Ferry Prins

Abstract: Metal halide perovskites are known to suffer from rapid degradation, limiting their direct applicability. Here, the degradation of phenethylammonium lead iodide (PEA2PbI4) two-dimensional perovskites under ambient conditions is studied using fluorescence, absorbance and fluorescence lifetime measurements. It is demonstrated that a long-term stability of two-dimensional perovskites can be achieved… ▽ More Metal halide perovskites are known to suffer from rapid degradation, limiting their direct applicability. Here, the degradation of phenethylammonium lead iodide (PEA2PbI4) two-dimensional perovskites under ambient conditions is studied using fluorescence, absorbance and fluorescence lifetime measurements. It is demonstrated that a long-term stability of two-dimensional perovskites can be achieved through the encapsulation with hexagonal boron nitride. While un-encapsulated perovskite flakes degrade within hours, the encapsulated perovskites are stable for at least three months. In addition, encapsulation considerably improves the stability under laser irradiation. The environmental stability, combined with the improved durability under illumination, is a critical ingredient for thorough spectroscopic studies of the intrinsic opto-electronic properties of this material platform. △ Less

Submitted 23 September, 2020; originally announced September 2020.

Comments: 10 pages, 4 figures, and supporting information

Journal ref: Nanomaterials 2019, 9(8), 1120

Optical-based thickness measurement of MoO$_3$ nanosheets

Authors: Sergio Puebla, Antonio Mariscal-Jiménez, Rosalía Serna Galán, Carmen Munuera, Andres Castellanos-Gomez

Abstract: Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO$_3$ flakes on SiO$_2$/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy imag… ▽ More Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO$_3$ flakes on SiO$_2$/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy images, one can make a first approximation of the thickness with an uncertainty of $\pm3$ nm. The second method is based on the fit of optical contrast spectra, acquired with micro-reflectance measurements, to a Fresnel law-based model that provides an accurate measurement of the flake thickness with $\pm2$ nm of uncertainty. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Comments: 5 Figures

Journal ref: Nanomaterials 2020, 10(7), 1272

Thickness identification of thin InSe by optical microscopy methods

Authors: Qinghua Zhao, Sergio Puebla, Wenliang Zhang, Tao Wang, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Indium selenide (InSe), as a novel van der Waals layered semiconductor, has attracted a large research interest thanks to its excellent optical and electrical properties in the ultra-thin limit. Here, we discuss four different optical methods to quantitatively identify the thickness of thin InSe flakes on various substrates, such as SiO2/Si or transparent polymeric substrates. In the case of thin… ▽ More Indium selenide (InSe), as a novel van der Waals layered semiconductor, has attracted a large research interest thanks to its excellent optical and electrical properties in the ultra-thin limit. Here, we discuss four different optical methods to quantitatively identify the thickness of thin InSe flakes on various substrates, such as SiO2/Si or transparent polymeric substrates. In the case of thin InSe deposited on a transparent substrate, the transmittance of the flake in the blue region of the visible spectrum can be used to estimate the thickness. For InSe supported by SiO2/Si, the thickness of the flakes can be estimated either by assessing their apparent colors or accurately analyzed using a Fresnel-law based fitting model of the optical contrast spectra. Finally, we also studied the thickness dependency of the InSe photoluminescence emission energy, which provides an additional tool to estimate the InSe thickness and it works both for InSe deposited on SiO2/Si and on a transparent polymeric substrate. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Comments: 4 figures

Giant piezoresistive effect and strong band gap tunability in ultrathin InSe upon biaxial strain

Authors: Qinghua Zhao, Tao Wang, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: The ultrathin nature and dangling bonds free surface of two-dimensional (2D) semiconductors allow for significant modifications of their band gap through strain engineering. Here, thin InSe photodetector devices are biaxially stretched, finding, a strong band gap tunability upon strain. The applied biaxial strain is controlled through the substrate expansion upon temperature increase and the effec… ▽ More The ultrathin nature and dangling bonds free surface of two-dimensional (2D) semiconductors allow for significant modifications of their band gap through strain engineering. Here, thin InSe photodetector devices are biaxially stretched, finding, a strong band gap tunability upon strain. The applied biaxial strain is controlled through the substrate expansion upon temperature increase and the effective strain transfer from the substrate to the thin InSe is confirmed by Raman spectroscopy. The band gap change upon biaxial strain is determined through photoluminescence measurements, finding a gauge factor of up to ~200 meV/%. We further characterize the effect of biaxial strain on the electrical properties of the InSe devices. In the dark state, a large increase of the current is observed upon applied strain which gives a piezoresistive gauge factor value of ~450-1000, ~5-12 times larger than that of other 2D materials and of state-of-the-art silicon strain gauges. Moreover, the biaxial strain tuning of the InSe band gap also translates in a strain-induced redshift of the spectral response of our InSe photodetectors with ΔEcut-off ~173 meV at a rate of ~360 meV/% of strain, indicating a strong strain tunability of the spectral bandwidth of the photodetectors. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Comments: 5 main text figures, 1 table comparing the strain tunable bandgap for different 2Ds and 11 supporting information figures

Direct transformation of crystalline MoO$_3$ into few-layers MoS$_2$

Authors: Felix Carrascoso, Gabriel Sanchez-Santolino, Chun-wei Hsu, Norbert M. Nemes, Almudena Torres-Pardo, Patricia Gant, Federico J. Mompeán, Kourosh Kalantar-zadeh, José A. Alonso, Mar García-Hernández, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: We fabricate large-area atomically thin MoS$_2$ layers through the direct transformation of crystalline molybdenum MoS$_2$ (MoO$_3$) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm single-crystal domain size) with areas of up to 300x300 um$^2$ with 2-4 layers in thickness and show a marked p-type behaviour. The synthesized films are characte… ▽ More We fabricate large-area atomically thin MoS$_2$ layers through the direct transformation of crystalline molybdenum MoS$_2$ (MoO$_3$) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm single-crystal domain size) with areas of up to 300x300 um$^2$ with 2-4 layers in thickness and show a marked p-type behaviour. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: 6 figures in main text, 2 figures in supp. info

Journal ref: Materials, 13(10), 2293, 2020

Tunable Photodetectors via in situ Thermal Conversion of TiS$_3$ to TiO$_2$

Authors: Foad Ghasemi, Riccardo Frisenda, Eduardo Flores, Nikos Papadopoulos, Robert Biele, David Perez de Lara, Herre S. J. van der Zant, Kenji Watanabe, Takashi Taniguchi, Roberto D'Agosta, Jose R. Ares, Carlos Sánchez, Isabel J. Ferrer, Andres Castellanos-Gomez

Abstract: In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semi… ▽ More In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semiconductor that has attracted much attention recently thanks to its quasi-1D electronic and optoelectronic properties and its direct bandgap of 1.1 eV. Heating TiS$_3$ in air above 300 °C gradually converts it into TiO$_2$, a semiconductor with a wide bandgap of 3.2 eV with ap-plications in photo-electrochemistry and catalysis. In this work, we investigate the controlled thermal oxidation of individual TiS$_3$ nanoribbons and its influence on the optoelectronic properties of TiS$_3$-based photodetectors. We observe a step-wise change in the cut-off wavelength from its pristine value ~1000 nm to 450 nm after subjecting the TiS$_3$ devices to subsequent thermal treatment cycles. Ab-initio and many-body calculations confirm an increase in the bandgap of titanium oxysulfide (TiO$_{2-x}$S$_x$) when increasing the amount of oxygen and reducing the amount of sulfur. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: 7 figures in main text, 9 figures in supp. info

Journal ref: Nanomaterials, 10(4), 711, 2020

A system to test 2D optoelectronic devices in high vacuum

Authors: Qinghua Zhao, Felix Carrascoso, Patricia Gant, Tao Wang, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: The exploration of electronic and optoelectronic properties of two-dimensional (2D) materials has become one of the most attractive line of research since the isolation of graphene. Such 'all-surface materials' present a strong sensitivity to environmental conditions and thus characterization of the devices based on these materials usually requires measurement systems operating in high-vacuum. How… ▽ More The exploration of electronic and optoelectronic properties of two-dimensional (2D) materials has become one of the most attractive line of research since the isolation of graphene. Such 'all-surface materials' present a strong sensitivity to environmental conditions and thus characterization of the devices based on these materials usually requires measurement systems operating in high-vacuum. However, conventional optoelectronic probe-station testing systems are are not compatible with high vacuum operation and vacuum-compatible versions are rather expensive. Here, we present a high-vacuum system specifically designed to test electronic and optoelectronic devices based on 2D materials. This system can be implemented with low budget and it is mostly based on the assembly of commercially available standard vacuum and optic components. Despite the simplicity of this system we demonstrate full capabilities to characterize optoelectronic devices in a broad range of wavelengths with fast pumping/venting speed and possibility of modulating the device temperature (room temperature to ~150deg). △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: Tables including all the part-numbers to replicate the setup are provided

Journal ref: J. Phys. Mater. 3 036001 (2020)

Strain engineering in single-, bi- and tri-layer MoS2, MoSe2, WS2 and WSe2

Authors: Felix Carrascoso, Hao Li, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Strain is a powerful tool to modify the optical properties of semiconducting transition metal dichalcogenides like MoS2, MoSe2, WS2 and WSe2. In this work we provide a thorough description of the technical details to perform uniaxial strain measurements on these two-dimensional semiconductors and we provide a straightforward calibration method to determine the amount of applied strain with high ac… ▽ More Strain is a powerful tool to modify the optical properties of semiconducting transition metal dichalcogenides like MoS2, MoSe2, WS2 and WSe2. In this work we provide a thorough description of the technical details to perform uniaxial strain measurements on these two-dimensional semiconductors and we provide a straightforward calibration method to determine the amount of applied strain with high accuracy. We then employ reflectance spectroscopy to analyze the strain tunability of the electronic properties of single-, bi- and tri-layer MoS2, MoSe2, WS2 and WSe2. Finally, we quantify the flake-to-flake variability by analyzing 15 different single-layer MoS2 flakes. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: 4 main text figures, 5 tables, 18 figures in the supporting information

Journal ref: Nano Research, volume 14, pages 1698-1703 (2021)

Microheater actuators as a versatile platform for strain engineering in 2D materials

Authors: Yu Kyoung Ryu, Felix Carrascoso, Rubén López-Nebreda, Nicolás Agraït, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion coefficient. By running current through the microheater one can vary the temperature of the polymer and induce a controlled biaxial expansion of its surface. This contro… ▽ More We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion coefficient. By running current through the microheater one can vary the temperature of the polymer and induce a controlled biaxial expansion of its surface. This controlled biaxial expansion can be transduced to biaxial strain to 2D materials, placed onto the polymer surface, which in turn induces a shift of the optical spectrum. Our thermal strain actuators can reach a maximum biaxial strain of 0.64 % and they can be modulated at frequencies up to 8 Hz. The compact geometry of these actuators results in a negligible spatial drift of 0.03 um/deg, which facilitates their integration in optical spectroscopy measurements. We illustrate the potential of this strain engineering platform to fabricate a strain-actuated optical modulator with single-layer MoS2. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: 5 main text figures + 5 supp. info. figures

MoS$_2$-on-paper optoelectronics: drawing photodetectors with van der Waals semiconductors beyond graphite

Authors: Ali Mazaheri, Martin Lee, Herre S. J. van der Zant, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: We fabricate paper-supported semiconducting devices by rubbing a layered molybdenum disulfide (MoS2) crystal onto a piece of paper, similarly to the action of drawing/writing with a pencil on paper. We show that the abrasion between the MoS2 crystal and the paper substrate efficiently exfoliates the crystals, breaking the weak van der Waals interlayer bonds and leading to the deposition of a film… ▽ More We fabricate paper-supported semiconducting devices by rubbing a layered molybdenum disulfide (MoS2) crystal onto a piece of paper, similarly to the action of drawing/writing with a pencil on paper. We show that the abrasion between the MoS2 crystal and the paper substrate efficiently exfoliates the crystals, breaking the weak van der Waals interlayer bonds and leading to the deposition of a film of interconnected MoS2 platelets. Employing this simple method, that can be easily extended to other 2D materials, we fabricate MoS2-on-paper broadband photodectectors with spectral sensitivity from the ultraviolet (UV) to the near-infrared (NIR). We also used these paper-based photodetectors to acquire pictures of objects by mounting the photodetectors in a homebuilt single-pixel camera setup. △ Less

Submitted 11 June, 2020; v1 submitted 3 May, 2020; originally announced May 2020.

Comments: 6 main text figures + 4 Supp Info figures

A system for the deterministic transfer of 2D materials under inert environmental conditions

Authors: Patricia Gant, Felix Carrascoso, Qinghua Zhao, Yu Kyoung Ryu, Michael Seitz, Ferry Prins, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes th… ▽ More The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes that require the use of very thick gloves to operate within the chamber or the implementation of several motorized micro-manipulators. Here, we set up a deterministic transfer system for 2D materials within a gloveless anaerobic chamber. Unlike other setups based on over-pressurized gloveboxes, in our system the operator can manipulate the 2D materials within the chamber with bare hands. This experimental setup allows us to exfoliate 2D materials and to deterministically place them at a desired location with accuracy in a controlled O2-free and very low humidity (<2% RH) atmosphere. We illustrate the potential of this system to work with air-sensitive 2D materials by comparing the stability of black phosphorus and perovskite flakes inside and outside the anaerobic chamber. △ Less

Submitted 14 February, 2020; originally announced March 2020.

Comments: 6 main text figures, 7 supp. info. figures. 1 main text table with all the part numbers needed to assemble the setup

Journal ref: 2D Mater. 7 025034 (2020)

InSe: a two-dimensional semiconductor with superior flexibility

Authors: Qinghua Zhao, Riccardo Frisenda, Tao Wang, Andres Castellanos-Gomez

Abstract: Two-dimensional Indium Selenide (InSe) has attracted extensive attention recently due to its record-high charge carrier mobility and photoresponsivity in the fields of electronics and optoelectronics. Nevertheless, the mechanical properties of this material in the ultra-thin regime have not been investigated yet. Here, we present our efforts to determine the Young's modulus of thin InSe (~1-2 laye… ▽ More Two-dimensional Indium Selenide (InSe) has attracted extensive attention recently due to its record-high charge carrier mobility and photoresponsivity in the fields of electronics and optoelectronics. Nevertheless, the mechanical properties of this material in the ultra-thin regime have not been investigated yet. Here, we present our efforts to determine the Young's modulus of thin InSe (~1-2 layers to ~40 layers) flakes experimentally by using buckling-based methodology. We find that the Young's modulus has a value of 23.1 +- 5.2 GPa, one of the lowest values reported up to date for crystalline two-dimensional materials. This superior flexibility can be very attractive for different applications, such as strain engineering and flexible electronics. △ Less

Submitted 1 March, 2020; originally announced March 2020.

Comments: 3 figures, 1 table

Journal ref: Nanoscale, 2019,11, 9845-9850

An inexpensive system for the deterministic transfer of 2D materials

Authors: Qinghua Zhao, Tao Wang, Yu Kyoung Ryu, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: The development of systems for the deterministic transfer of two-dimensional (2D) materials have undoubtedly contributed to a great advance in the 2D materials research. In fact, they have made it possible to fabricate van der Waals heterostructures and 2D materials-based devices with complex architectures. Nonetheless, as far as we know, the amount of papers in the literature providing enough det… ▽ More The development of systems for the deterministic transfer of two-dimensional (2D) materials have undoubtedly contributed to a great advance in the 2D materials research. In fact, they have made it possible to fabricate van der Waals heterostructures and 2D materials-based devices with complex architectures. Nonetheless, as far as we know, the amount of papers in the literature providing enough details to reproduce these systems by other research groups is very scarce in the literature. Moreover, these systems typically require the use of expensive optical and mechanical components hampering their applicability in research groups with low budget. Here we demonstrate how a deterministic placement system for 2D materials set up with full capabilities can be implemented under 900 Eur which can be easily implemented in low budget labs and educational labs. △ Less

Submitted 14 February, 2020; originally announced February 2020.

Comments: 4 Figures in main text, a full step-by-step assembly guide in the supp. info. all part numbers needed to assemble the setup included

Journal ref: J. Phys. Mater. 3 016001 (2020)

Tailored Graphenic Structures Directly Grown on Titanium Oxide Boost the Interfacial Charge Transfer

Authors: Roberto Munoz, Carlos Sanchez-Sanchez, Pablo Merino, Elena Lopez-Elvira, Carmen Munuera, Patricia Gant, Maria F. Lopez, Andres Castellanos-Gomez, Jose Angel Martin-Gago, Mar Garcia-Hernandez

Abstract: The successful application of titanium oxide-graphene hybrids in the fields of photocatalysis, photovoltaics and photodetection strongly depends on the interfacial contact between both materials. The need to provide a good coupling between the enabling conductor and the photoactive phase prompted us to directly grow conducting graphenic structures on TiO2 crystals. We here report on the direct syn… ▽ More The successful application of titanium oxide-graphene hybrids in the fields of photocatalysis, photovoltaics and photodetection strongly depends on the interfacial contact between both materials. The need to provide a good coupling between the enabling conductor and the photoactive phase prompted us to directly grow conducting graphenic structures on TiO2 crystals. We here report on the direct synthesis of tailored graphenic structures by using Plasma Assisted Chemical Vapour Deposition that present a clean junction with the prototypical titanium oxide (110) surface. Chemical analysis of the interface indicates chemical bonding between both materials. Photocurrent measurements under UV light illumination manifest that the charge transfer across the interface is efficient. Moreover, the influence of the synthesis atmosphere, gas precursor (C2H2) and diluents (Ar, O2), on the interface and on the structure of the as-grown graphenic material is assessed. The inclusion of O2 promotes vertical growth of partially oxidized carbon nanodots/rods with controllable height and density. The deposition with Ar results in continuous graphenic films with low resistivity (6.8x10-6 ohm x m). The synthesis protocols developed here are suitable to produce tailored carbon-semiconductor structures on a variety of practical substrates as thin films, pillars or nanoparticles. △ Less

Submitted 28 October, 2019; originally announced October 2019.

Comments: 24 pages, 8 figures, original research paper

Anisotropic buckling of few-layer black phosphorus

Authors: Luis Vaquero-Garzon, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: When a two-dimensional material, adhered onto a compliant substrate, is subjected to compression it can undertake a buckling instability yielding to a periodic rippling. Interestingly, when black phosphorus flakes are compressed along the zig-zag crystal direction the flake buckles forming ripples with a 40% longer period than that obtained when the compression is applied along the armchair direct… ▽ More When a two-dimensional material, adhered onto a compliant substrate, is subjected to compression it can undertake a buckling instability yielding to a periodic rippling. Interestingly, when black phosphorus flakes are compressed along the zig-zag crystal direction the flake buckles forming ripples with a 40% longer period than that obtained when the compression is applied along the armchair direction. This anisotropic buckling stems from the puckered honeycomb crystal structure of black phosphorus and a quantitative analysis of the ripple period allows us to determine the Youngs's modulus of few-layer black phosphorus along the armchair direction (EbP_AC = 35.1 +- 6.3 GPa) and the zig-zag direction (EbP_ZZ = 93.3 +- 21.8 GPa). △ Less

Submitted 17 July, 2019; originally announced July 2019.

Comments: 4 figures + 1 table in main text, 4 supp. info. figures. Available Open Access at publisher's webpage

Journal ref: Nanoscale, 2019,11, 12080-12086

Thickness determination of MoS2, MoSe2, WS2 and WSe2 on transparent stamps used for deterministic transfer of 2D materials

Authors: Najme S. Taghavi, Patricia Gant, Peng Huang, Iris Niehues, Robert Schmidt, Steffen Michaelis de Vasconcellos, Rudolf Bratschitsch, Mar García-Hernández, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Here, we propose a method to determine the thickness of the most common transition metal dichalcogenides (TMDCs) placed on the surface of transparent stamps, used for the deterministic placement of two-dimensional materials, by analyzing the red, green and blue channels of transmission-mode optical microscopy images of the samples. In particular, the blue channel transmittance shows a large and mo… ▽ More Here, we propose a method to determine the thickness of the most common transition metal dichalcogenides (TMDCs) placed on the surface of transparent stamps, used for the deterministic placement of two-dimensional materials, by analyzing the red, green and blue channels of transmission-mode optical microscopy images of the samples. In particular, the blue channel transmittance shows a large and monotonic thickness dependence, making it a very convenient probe of the flake thickness. The method proved to be robust given the small flake-to-flake variation and the insensitivity to doping changes of MoS2. We also tested the method for MoSe2, WS2 and WSe2. These results provide a reference guide to identify the number of layers of this family of materials on transparent substrates only using optical microscopy. △ Less

Submitted 17 July, 2019; originally announced July 2019.

Comments: 4 figures in main text, 2 figures in supp. info

Journal ref: Nano Research (2019) 12:1691

Mechanical and liquid phase exfoliation of cylindrite: a natural van der Waals superlattice with intrinsic magnetic interactions

Authors: Yue Niu, Julia Villalva, Riccardo Frisenda, Gabriel Sanchez-Santolino, Luisa Ruiz-González, Emilio M. Pérez, Mar García-Hernández, Enrique Burzurí, Andres Castellanos-Gomez

Abstract: We report the isolation of thin flakes of cylindrite, a naturally occurring van der Waals superlattice, by means of mechanical and liquid phase exfoliation. We find that this material is a heavily doped p-type semiconductor with a narrow gap (<0.85 eV) with intrinsic magnetic interactions that are preserved even in the exfoliated nanosheets. Due to its environmental stability and high electrical c… ▽ More We report the isolation of thin flakes of cylindrite, a naturally occurring van der Waals superlattice, by means of mechanical and liquid phase exfoliation. We find that this material is a heavily doped p-type semiconductor with a narrow gap (<0.85 eV) with intrinsic magnetic interactions that are preserved even in the exfoliated nanosheets. Due to its environmental stability and high electrical conductivity, cylindrite can be an interesting alternative to the existing two-dimensional magnetic materials. △ Less

Submitted 17 July, 2019; originally announced July 2019.

Comments: 5 figures in main text, 1 supp. info. figure. Available open access at the publisher's web

Journal ref: 2D Materials (2019) 6 035023

Fast Yet Quantum-Efficient Few-Layer Vertical MoS2 Photodetectors

Authors: David Maeso, Andres Castellanos-Gomez, Nicolas Agraït, Gabino Rubio-Bollinger

Abstract: Semiconducting 2D materials, such as molybdenum disulfide (MoS2) and other members of the transition metal dichalcogenide family, have emerged as promising materials for applications in high performance nanoelectronics that exhibit excellent electrical and optical properties. Highly efficient photocurrent (PC) generation is reported in vertical few layer MoS2 devices contacted with semitransparent… ▽ More Semiconducting 2D materials, such as molybdenum disulfide (MoS2) and other members of the transition metal dichalcogenide family, have emerged as promising materials for applications in high performance nanoelectronics that exhibit excellent electrical and optical properties. Highly efficient photocurrent (PC) generation is reported in vertical few layer MoS2 devices contacted with semitransparent metallic electrodes. The light absorption of the device can be improved by fabricating vertical photodevices using few layer flakes, achieving a photoresponse of up to 0.11 A/W and an external quantum efficiency (EQE) of up to 30%. Because of the vertical design, the distance between electrodes can be kept in the range of a few nanometers, thus substantially reducing the collection time of photogenerated carriers and increasing the efficiency of the devices. The wavelength dependent PC, photoresponsivity, and EQE are measured over a photon energy range from 1.24 to 2.58 eV. Compared to previous in plane and vertical devices, these vertical few layer MoS2 photodevices exhibit very short response time, 60 ns, and a cutoff frequency of 5.5 MHz, while maintaining high photoresponsivity. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Comments: Main text: 9 pages, 4 figures. Supp. Info: 8 pages, 5 figures

Journal ref: Advanced Electronic Materials, 2019, 1900141

Polarization-sensitive and broadband photodetection based on a mixed-dimensionality TiS3/Si p-n junction

Authors: Yue Niu, Riccardo Frisenda, Eduardo Flores, Jose R. Ares, Weicheng Jiao, David Perez de Lara, Carlos Sanchez, Rongguo Wang, Isabel J. Ferrer, Andres Castellanos-Gomez

Abstract: The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector base… ▽ More The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector based on a mixed-dimensionality TiS3/Si p-n junction. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350 % and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization sensitive systems such as polarimeters. △ Less

Submitted 22 September, 2020; v1 submitted 27 March, 2019; originally announced March 2019.

Comments: 6 main text figures, 1 figure. Includes the supporting information (18 supp. info. figures)

Journal ref: Advanced Optical Materials, 2018, vol. 6, no 19, p. 1800351

Revisiting the buckling metrology method to determine the Young's modulus of 2D materials

Authors: Nestor Iguiñiz, Riccardo Frisenda, Rudolf Bratschitsch, Andres Castellanos-Gomez

Abstract: Measuring the mechanical properties of two-dimensional materials is a formidable task. While regular electrical and optical probing techniques are suitable even for atomically thin materials, conventional mechanical tests cannot be directly applied. Therefore, new mechanical testing techniques need to be developed. Up to now, the most widespread approaches require micro-fabrication to create freel… ▽ More Measuring the mechanical properties of two-dimensional materials is a formidable task. While regular electrical and optical probing techniques are suitable even for atomically thin materials, conventional mechanical tests cannot be directly applied. Therefore, new mechanical testing techniques need to be developed. Up to now, the most widespread approaches require micro-fabrication to create freely suspended membranes, rendering their implementation complex and costly. Here, we revisit a simple yet powerful technique to measure the mechanical properties of thin films. The buckling metrology method, that does not require the fabrication of freely suspended structures, is used to determine the Young's modulus of several transition metal dichalcogenides (MoS2, MoSe2, WS2 and WSe2) with thicknesses ranging from 3 to 10 layers. We critically compare the obtained values for the Young's modulus and their uncertainty, finding that this simple technique provides results, which are in good agreement with those reported using other highly sophisticated testing methods. By comparing the cost, complexity and time required for the different methods reported in the literature, the buckling metrology method presents certain advantages that makes it an interesting mechanical test tool for 2D materials. △ Less

Submitted 17 July, 2019; v1 submitted 7 February, 2019; originally announced February 2019.

Comments: Main text: 3 figures, 2 tables. Supp Info: 11 figures, 2 tables. This is an author's version (post peer-review)

Journal ref: Advanced Materials, 2019, 31(10):1807150

A strain tunable single-layer MoS2 photodetector

Authors: Patricia Gant, Peng Huang, David Pérez de Lara, Dan Guo, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Strain engineering, which aims to tune the bandgap of a semiconductor by the application of strain, has emerged as an interesting way to control the electrical and optical properties of two-dimensional (2D) materials. Apart from the changes in the intrinsic properties of 2D materials, the application of strain can be also used to modify the characteristics of devices based on them. In this work, w… ▽ More Strain engineering, which aims to tune the bandgap of a semiconductor by the application of strain, has emerged as an interesting way to control the electrical and optical properties of two-dimensional (2D) materials. Apart from the changes in the intrinsic properties of 2D materials, the application of strain can be also used to modify the characteristics of devices based on them. In this work, we study flexible and transparent photodetectors based on single-layer MoS2 under the application of biaxial strain. We find that by controlling the level of strain, we can tune the photoresponsivity (by 2-3 orders of magnitude), the response time (from <80 ms to 1.5 s) and the spectral bandwidth (with a gauge factor of 135 meV/% or 58 nm/%) of the device. △ Less

Submitted 17 July, 2019; v1 submitted 7 February, 2019; originally announced February 2019.

Comments: 3 main text figures and 12 supporting information figures

Optical contrast and refractive index of natural van der Waals heterostructure nanosheets of franckeite

Authors: Patricia Gant, Foad Ghasemi, David Maeso, Carmen Munuera, Elena López-Elvira, Riccardo Frisenda, David Pérez De Lara, Gabino Rubio-Bollinger, Mar Garcia-Hernandez, Andres Castellanos-Gomez

Abstract: We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission mode and epi-illumination mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive ind… ▽ More We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission mode and epi-illumination mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive index of franckeite in a broad range of the visible spectrum through a fit of the acquired spectra to a Fresnel law based model. △ Less

Submitted 11 October, 2018; originally announced October 2018.

Comments: Main text (6 figures) + Supp. Info. (6 figures)

Journal ref: Beilstein J Nanotechnol. 2017; 8: 2357-2362

Elucidating the Methylammonium (MA) Conformation in MAPbBr3 Perovskite with Application in Solar Cells

Authors: Carlos A. López, María Victoria Martínez-Huerta, María Consuelo Alvarez-Galván, Paula Kayser, Patricia Gant, Andres Castellanos-Gomez, María T. Fernández-Díaz, Francois Fauth, José A. Alonso

Abstract: Hybrid organic-inorganic perovskites, MAPbX3 (X= halogen), containing methylammonium (MA: CH3-NH3+) in the large voids conformed by the PbX6 octahedral network, are the active absorption materials in the new generation of solar cells. CH3NH3PbBr3 is a promising alternative with a large band-gap that gives rise to a high open circuit voltage. A deep knowledge of the crystal structure and, in partic… ▽ More Hybrid organic-inorganic perovskites, MAPbX3 (X= halogen), containing methylammonium (MA: CH3-NH3+) in the large voids conformed by the PbX6 octahedral network, are the active absorption materials in the new generation of solar cells. CH3NH3PbBr3 is a promising alternative with a large band-gap that gives rise to a high open circuit voltage. A deep knowledge of the crystal structure and, in particular, the MA conformation inside the perovskite cage across the phase transitions undergone below room temperature, seems essential to establish structure-property correlations that may drive to further improvements. The presence of protons requires the use of neutrons, combined with synchrotron XRD data that help to depict subtle symmetry changes undergone upon cooling. We present a consistent picture of the structural features of this fascinating material, in complement with photocurrent measurements from a photodetector device, demonstrating the potential of MAPbBr3 in optoelectronics. △ Less

Submitted 28 April, 2018; originally announced April 2018.

Comments: Authors' version of the peer-reviewed manuscript. 19 pages, 7 figures

Journal ref: Inorg. Chem., 2017, 56 (22), pp 14214-14219

Recent progress in the assembly of nanodevices and van der Waals heterostructures by deterministic placement of 2D materials

Authors: Riccardo Frisenda, Efrén Navarro-Moratalla, Patricia Gant, David Pérez De Lara, Pablo Jarillo-Herrero, Roman V. Gorbachev, Andres Castellanos-Gomez

Abstract: Designer heterostructures can now be assembled layer-by-layer with unmatched precision thanks to the recently developed deterministic placement methods to transfer two-dimensional (2D) materials. This possibility constitutes the birth of a very active research field on the so-called van der Waals heterostructures. Moreover, these deterministic placement methods also open the door to fabricate comp… ▽ More Designer heterostructures can now be assembled layer-by-layer with unmatched precision thanks to the recently developed deterministic placement methods to transfer two-dimensional (2D) materials. This possibility constitutes the birth of a very active research field on the so-called van der Waals heterostructures. Moreover, these deterministic placement methods also open the door to fabricate complex devices, which would be otherwise very difficult to achieve by conventional bottom-up nanofabrication approaches, and to fabricate fully-encapsulated devices with exquisite electronic properties. The integration of 2D materials with existing technologies such as photonic and superconducting waveguides and fiber optics is another exciting possibility. Here, we review the state-of-the-art of the deterministic placement methods, describing and comparing the different alternative methods available in the literature and we illustrate their potential to fabricate van der Waals heterostructures, to integrate 2D materials into complex devices and to fabricate artificial bilayer structures where the layers present a user-defined rotational twisting angle. △ Less

Submitted 15 November, 2017; originally announced December 2017.

Comments: Tutorial Review, 13 figures. Authors' pre-peer review version of the article

Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures

Authors: Yue Niu, Riccardo Frisenda, Simon A. Svatek, Gloria Orfila, Fernando Gallego, Patricia Gant, Nicolás Agraït, Carlos León, Alberto Rivera-Calzada, David Perez De Lara, Jacobo Santamaría, Andres Castellanos-Gomez

Abstract: The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential num… ▽ More The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS2 onto a lanthanum strontium manganite (La0.7Sr0.3MnO3) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 103, and a photovoltaic effect with Voc up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities. △ Less

Submitted 19 June, 2017; originally announced June 2017.

Comments: 1 table, 4 figures (+9 supp. info. figures)

Lithography-free electrical transport measurements on 2D materials by direct microprobing

Authors: Patricia Gant, Yue Niu, Simon A. Svatek, Nicolás Agraït, Carmen Munuera, Mar García- Hernández, Riccardo Frisenda, David Perez de Lara, Andres Castellanos-Gomez

Abstract: We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the cryst… ▽ More We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS2 devices fabricated by conventional lithographic process. We also show that this method can be used with other 2D materials. △ Less

Submitted 20 May, 2017; originally announced May 2017.

Comments: 7 main text figures + 11 Supp. Info. figures. Total 25 pages

Micro-reflectance and transmittance spectroscopy: a versatile and powerful tool to characterize 2D materials

Authors: Riccardo Frisenda, Yue Niu, Patricia Gant, Aday J. Molina-Mendoza, Robert Schmidt, Rudolf Bratschitsch, Jinxin Liu, Lei Fu, Dumitru Dumcenco, Andras Kis, David Perez De Lara, Andres Castellanos-Gomez

Abstract: Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D… ▽ More Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D materials with a lateral resolution of ~1 micron in the visible and near-infrared part of the spectrum. We demonstrate the potential of the presented setup to determine the number of layers of 2D materials and to characterize their fundamental optical properties such as excitonic resonances. We illustrate its performance by studying mechanically exfoliated and chemical vapor-deposited transition metal dichalcogenide samples. △ Less

Submitted 13 December, 2016; originally announced December 2016.

Comments: 5 main text figures + 1 table with all the part numbers to replicate the experimental setup + 4 supp. info. figures

A simple method to characterize the electrical and mechanical properties of micro-fibers

Authors: Andres Castellanos-Gomez

Abstract: A procedure to characterize the electrical and mechanical properties of micro-fibers is presented here. As the required equipment can be found in many teaching laboratories, it can be carried out by physics and mechanical/electrical engineering students. The electrical resistivity, mass density and Young's modulus of carbon micro-fibers have been determined using this procedure, obtaining values i… ▽ More A procedure to characterize the electrical and mechanical properties of micro-fibers is presented here. As the required equipment can be found in many teaching laboratories, it can be carried out by physics and mechanical/electrical engineering students. The electrical resistivity, mass density and Young's modulus of carbon micro-fibers have been determined using this procedure, obtaining values in very good agreement with the reference values. The Young's modulus has been obtained by measuring the resonance frequency of carbon fiber based cantilevers. In this way, one can avoid common approaches based on tensile or bending tests which are difficult to implement for microscale materials. Despite the simplicity of the experiments proposed here, they can be used to trigger in the students interest on the electrical and mechanical properties of microscale materials. △ Less

Submitted 23 October, 2013; originally announced October 2013.

Comments: 4 figures + 1 appendix

Journal ref: European Journal of Physics 34 (6) 1547-1554 (2013)

A simple strobe to study high-order harmonics and multifrequency oscillations in mechanical resonators

Authors: Andres Castellanos-Gomez

Abstract: A simple strobe setup with potential to study higher-order eigenmodes and multifrequency oscillations in micromechanical resonators is described. It requires standard equipment, commonly found in many laboratories, and it can thus be employed for public demonstrations of mechanical resonances. Moreover, the work presented here can be used by undergraduate students and/or teachers to prepare practi… ▽ More A simple strobe setup with potential to study higher-order eigenmodes and multifrequency oscillations in micromechanical resonators is described. It requires standard equipment, commonly found in many laboratories, and it can thus be employed for public demonstrations of mechanical resonances. Moreover, the work presented here can be used by undergraduate students and/or teachers to prepare practical works in laboratory courses at physics or engineering universities. The dynamics of a micromachined cantilever is analysed as an example. In fact, using our stroboscopic setup, the first and the second flexural eigenmodes as well as a multifrequency oscillation composed by a superposition of both modes have been successfully filmed with a conventional optical microscope equipped with a digital camera. △ Less

Submitted 2 November, 2012; originally announced November 2012.

Comments: 5 pages, 3 figures

Journal ref: European Journal of Physics, Vol. 34 Iss. 1 (2013)

Calibration of piezoelectric positioning actuators using a reference voltage-to-displacement transducer based on quartz tuning forks

Authors: Andres Castellanos-Gomez, Carlos R. Arroyo, Nicolás Agraït, Gabino Rubio-Bollinger

Abstract: We use a piezoelectric quartz tuning fork to calibrate the displacement of ceramic piezoelectric scanners which are widely employed in scanning probe microscopy. We measure the static piezoelectric response of a quartz tuning fork and find it to be highly linear, non-hysteretic and with negligible creep. These performance characteristics, close to those of an ideal transducer, make quartz transduc… ▽ More We use a piezoelectric quartz tuning fork to calibrate the displacement of ceramic piezoelectric scanners which are widely employed in scanning probe microscopy. We measure the static piezoelectric response of a quartz tuning fork and find it to be highly linear, non-hysteretic and with negligible creep. These performance characteristics, close to those of an ideal transducer, make quartz transducers superior to ceramic piezoelectric actuators. Furthermore, quartz actuators in the form of a tuning fork have the advantage of yielding static displacements comparable to those of local probe microscope scanners. We use the static displacement of a quartz tuning fork as a reference to calibrate the three axis displacement of a ceramic piezoelectric scanner. Although this calibration technique is a non-traceable method, it can be more versatile than using calibration grids because it enables to characterize the linear and non-linear response of a piezoelectric scanner in a broad range of displacements, spanning from a fraction of a nanometer to hundreds of nanometers. In addition, the creep and the speed dependent piezoelectric response of ceramic scanners can be studied in detail. △ Less

Submitted 26 March, 2012; originally announced March 2012.

Comments: 9 pages, 3 figures

Journal ref: Microscopy and Microanalysis. vol. 18 iss. 2, pp 353-358 (2012)

Carbon fibre tips for scanning probe microscopy based on quartz tuning fork force sensors

Authors: Andres Castellanos-Gomez, Nicolas Agraït, Gabino Rubio-Bollinger

Abstract: We report the fabrication and the characterization of carbon fibre tips for their use in combined scanning tunnelling and force microscopy based on piezoelectric quartz tuning fork force sensors. We find that the use of carbon fibre tips results in a minimum impact on the dynamics of quartz tuning fork force sensors yielding a high quality factor and consequently a high force gradient sensitivity.… ▽ More We report the fabrication and the characterization of carbon fibre tips for their use in combined scanning tunnelling and force microscopy based on piezoelectric quartz tuning fork force sensors. We find that the use of carbon fibre tips results in a minimum impact on the dynamics of quartz tuning fork force sensors yielding a high quality factor and consequently a high force gradient sensitivity. This high force sensitivity in combination with high electrical conductivity and oxidation resistance of carbon fibre tips make them very convenient for combined and simultaneous scanning tunnelling microscopy and atomic force microscopy measurements. Interestingly, these tips are quite robust against occasionally occurring tip crashes. An electrochemical fabrication procedure to etch the tips is presented that produces a sub-100 nm apex radius in a reproducible way which can yield high resolution images. △ Less

Submitted 12 March, 2010; originally announced March 2010.

Comments: 14 pages, 10 figures

Journal ref: Nanotechnology 21, 145702 (2010)

Dynamics of quartz tuning fork force sensors used in scanning probe microscopy

Authors: Andres Castellanos-Gomez, Nicolas Agraït, Gabino Rubio-Bollinger

Abstract: We have performed an experimental characterization of the dynamics of oscillating quartz tuning forks which are being increasingly used in scanning probe microscopy as force sensors. We show that tuning forks can be described as a system of coupled oscillators. Nevertheless, this description requires the knowledge of the elastic coupling constant between the prongs of the tuning fork, which has no… ▽ More We have performed an experimental characterization of the dynamics of oscillating quartz tuning forks which are being increasingly used in scanning probe microscopy as force sensors. We show that tuning forks can be described as a system of coupled oscillators. Nevertheless, this description requires the knowledge of the elastic coupling constant between the prongs of the tuning fork, which has not yet been measured. Therefore tuning forks have been usually described within the single oscillator or the weakly coupled oscillators approximation that neglects the coupling between the prongs. We propose three different procedures to measure the elastic coupling constant: an opto-mechanical method, a variation of the Cleveland method and a thermal noise based method. We find that the coupling between the quartz tuning fork prongs has a strong influence on the dynamics and the measured motion is in remarkable agreement with a simple model of coupled harmonic oscillators. The precise determination of the elastic coupling between the prongs of a tuning fork allows to obtain a quantitative relation between the resonance frequency shift and the force gradient acting at the free end of a tuning fork prong. △ Less

Submitted 12 March, 2010; originally announced March 2010.

Comments: 16 pages, 6 figures, 2 Tables

Journal ref: Nanotechnology 20 215502 (2009)