-
Biaxial versus uniaxial strain tuning of single-layer MoS$_2$
Authors:
Felix Carrascoso,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
Strain engineering has arisen as a powerful technique to tune the electronic and optical properties of two-dimensional semiconductors like molybdenum disulfide (MoS2). Although several theoretical works predicted that biaxial strain would be more effective than uniaxial strain to tune the band structure of MoS2, a direct experimental verification is still missing in the literature. Here we impleme…
▽ More
Strain engineering has arisen as a powerful technique to tune the electronic and optical properties of two-dimensional semiconductors like molybdenum disulfide (MoS2). Although several theoretical works predicted that biaxial strain would be more effective than uniaxial strain to tune the band structure of MoS2, a direct experimental verification is still missing in the literature. Here we implemented a simple experimental setup that allows to apply biaxial strain through the bending of a cruciform polymer substrate. We used the setup to study the effect of biaxial strain on the differential reflectance spectra of 12 single-layer MoS2 flakes finding a redshift of the excitonic features at a rate between -40 meV/% and -110 meV/% of biaxial tension. We also directly compare the effect of biaxial and uniaxial strain on the same single-layer MoS2 finding that the biaxial strain gauge factor is 2.3 times larger than the uniaxial strain one.
△ Less
Submitted 7 May, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Direct transformation of crystalline MoO$_3$ into few-layers MoS$_2$
Authors:
Felix Carrascoso,
Gabriel Sanchez-Santolino,
Chun-wei Hsu,
Norbert M. Nemes,
Almudena Torres-Pardo,
Patricia Gant,
Federico J. Mompeán,
Kourosh Kalantar-zadeh,
José A. Alonso,
Mar García-Hernández,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
We fabricate large-area atomically thin MoS$_2$ layers through the direct transformation of crystalline molybdenum MoS$_2$ (MoO$_3$) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm single-crystal domain size) with areas of up to 300x300 um$^2$ with 2-4 layers in thickness and show a marked p-type behaviour. The synthesized films are characte…
▽ More
We fabricate large-area atomically thin MoS$_2$ layers through the direct transformation of crystalline molybdenum MoS$_2$ (MoO$_3$) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm single-crystal domain size) with areas of up to 300x300 um$^2$ with 2-4 layers in thickness and show a marked p-type behaviour. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
A system to test 2D optoelectronic devices in high vacuum
Authors:
Qinghua Zhao,
Felix Carrascoso,
Patricia Gant,
Tao Wang,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
The exploration of electronic and optoelectronic properties of two-dimensional (2D) materials has become one of the most attractive line of research since the isolation of graphene. Such 'all-surface materials' present a strong sensitivity to environmental conditions and thus characterization of the devices based on these materials usually requires measurement systems operating in high-vacuum. How…
▽ More
The exploration of electronic and optoelectronic properties of two-dimensional (2D) materials has become one of the most attractive line of research since the isolation of graphene. Such 'all-surface materials' present a strong sensitivity to environmental conditions and thus characterization of the devices based on these materials usually requires measurement systems operating in high-vacuum. However, conventional optoelectronic probe-station testing systems are are not compatible with high vacuum operation and vacuum-compatible versions are rather expensive. Here, we present a high-vacuum system specifically designed to test electronic and optoelectronic devices based on 2D materials. This system can be implemented with low budget and it is mostly based on the assembly of commercially available standard vacuum and optic components. Despite the simplicity of this system we demonstrate full capabilities to characterize optoelectronic devices in a broad range of wavelengths with fast pumping/venting speed and possibility of modulating the device temperature (room temperature to ~150deg).
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Strain engineering in single-, bi- and tri-layer MoS2, MoSe2, WS2 and WSe2
Authors:
Felix Carrascoso,
Hao Li,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
Strain is a powerful tool to modify the optical properties of semiconducting transition metal dichalcogenides like MoS2, MoSe2, WS2 and WSe2. In this work we provide a thorough description of the technical details to perform uniaxial strain measurements on these two-dimensional semiconductors and we provide a straightforward calibration method to determine the amount of applied strain with high ac…
▽ More
Strain is a powerful tool to modify the optical properties of semiconducting transition metal dichalcogenides like MoS2, MoSe2, WS2 and WSe2. In this work we provide a thorough description of the technical details to perform uniaxial strain measurements on these two-dimensional semiconductors and we provide a straightforward calibration method to determine the amount of applied strain with high accuracy. We then employ reflectance spectroscopy to analyze the strain tunability of the electronic properties of single-, bi- and tri-layer MoS2, MoSe2, WS2 and WSe2. Finally, we quantify the flake-to-flake variability by analyzing 15 different single-layer MoS2 flakes.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Microheater actuators as a versatile platform for strain engineering in 2D materials
Authors:
Yu Kyoung Ryu,
Felix Carrascoso,
Rubén López-Nebreda,
Nicolás Agraït,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion coefficient. By running current through the microheater one can vary the temperature of the polymer and induce a controlled biaxial expansion of its surface. This contro…
▽ More
We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion coefficient. By running current through the microheater one can vary the temperature of the polymer and induce a controlled biaxial expansion of its surface. This controlled biaxial expansion can be transduced to biaxial strain to 2D materials, placed onto the polymer surface, which in turn induces a shift of the optical spectrum. Our thermal strain actuators can reach a maximum biaxial strain of 0.64 % and they can be modulated at frequencies up to 8 Hz. The compact geometry of these actuators results in a negligible spatial drift of 0.03 um/deg, which facilitates their integration in optical spectroscopy measurements. We illustrate the potential of this strain engineering platform to fabricate a strain-actuated optical modulator with single-layer MoS2.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
A system for the deterministic transfer of 2D materials under inert environmental conditions
Authors:
Patricia Gant,
Felix Carrascoso,
Qinghua Zhao,
Yu Kyoung Ryu,
Michael Seitz,
Ferry Prins,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes th…
▽ More
The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes that require the use of very thick gloves to operate within the chamber or the implementation of several motorized micro-manipulators. Here, we set up a deterministic transfer system for 2D materials within a gloveless anaerobic chamber. Unlike other setups based on over-pressurized gloveboxes, in our system the operator can manipulate the 2D materials within the chamber with bare hands. This experimental setup allows us to exfoliate 2D materials and to deterministically place them at a desired location with accuracy in a controlled O2-free and very low humidity (<2% RH) atmosphere. We illustrate the potential of this system to work with air-sensitive 2D materials by comparing the stability of black phosphorus and perovskite flakes inside and outside the anaerobic chamber.
△ Less
Submitted 14 February, 2020;
originally announced March 2020.
