-
On Apparent Absence of Green Gap in InGaN/GaN Quantum Disks and Wells Grown by Plasma-Assisted Molecular Beam Epitaxy
Authors:
Sharif Md. Sadaf,
Nirmal Anand,
Emile A. Carbone,
Dipon K. Ghosh,
Haipeng Tang
Abstract:
III-nitride based full-color blue, green and red-light emitting diodes are critically important for a broad range of important applications. To date, however, green or red color III-nitride light emitters grown by conventional growth techniques are limited in efficiency compared to blue emitters. As opposed to metal-organic chemical vapor deposition (MOCVD), while grown by plasma-assisted molecula…
▽ More
III-nitride based full-color blue, green and red-light emitting diodes are critically important for a broad range of important applications. To date, however, green or red color III-nitride light emitters grown by conventional growth techniques are limited in efficiency compared to blue emitters. As opposed to metal-organic chemical vapor deposition (MOCVD), while grown by plasma-assisted molecular beam epitaxy (PAMBE), the most intense emission is generally observed in the green spectral region in InGaN/GaN based light emitters. Such counterintuitive phenomenon of efficiency increase with increasing emission wavelength has been observed in both InGaN/GaN quantum-disks in nanowire and planar quantum-wells structures grown by PAMBE. Here, we experimentally show that the apparent absence of green gap in longer green wavelength is due to the difficulty of elimination of indium-rich non-radiative clusters and phase segregation in shorter blue wavelength quantum wells/disks.Excess indium due to the dissociation of the In-N bonds during growth lead to nitrogen vacancies and metallic inclusions. In radio-frequency PAMBE, the energy of the nitrogen radicals was found to be a driving force for indium incorporation.Our detailed growth and associated photoluminescence studies suggests that uniform phase and absence of metallic inclusion is the underlying mechanism of efficient green InGaN/GaN quantum wells/disks grown with sufficiently energetic plasma flux. Our study is valid for achieving very efficient green and red color InGaN/GaN and breaking the green gap bottleneck in quantum wells/disks grown by state-of-the-art high-power plasma-assisted molecular beam epitaxy
△ Less
Submitted 13 June, 2025;
originally announced June 2025.
-
Performance analysis of a 2.45 GHz microwave plasma torch for CO$_2$ decomposition in gas swirl configuration
Authors:
F. A. D'Isa,
E. A. D. Carbone,
A. Hecimovic,
U. Fantz
Abstract:
Microwave plasmas are a promising technology for energy-efficient CO$_{2}$ valorization via conversion of CO$_{2}$ into CO and O$_2$ using renewable energies. A 2.45 GHz microwave plasma torch with swirling CO$_{2}$ gas flow is studied in a large pressure (60-1000~mbar) and flow (5-100~slm) range. Two different modes of the plasma torch, depending on the operating pressure and microwave input powe…
▽ More
Microwave plasmas are a promising technology for energy-efficient CO$_{2}$ valorization via conversion of CO$_{2}$ into CO and O$_2$ using renewable energies. A 2.45 GHz microwave plasma torch with swirling CO$_{2}$ gas flow is studied in a large pressure (60-1000~mbar) and flow (5-100~slm) range. Two different modes of the plasma torch, depending on the operating pressure and microwave input power, are described: at pressures below 120~mbar the plasma fills most of the plasma torch volume whereas at pressures of about 120~mbar an abrupt contraction of the plasma in the center of the resonator is observed along with an increase of the gas temperature from 3000~K to 6000~K. The CO outflow is found to be proportional to the plasma effective surface and exhibits no significant dependence on the actual CO$_{2}$ flow injected into the reactor but only on the input power at certain pressure. Thermal dissociation calculations show that, even at the lowest pressures of this study, the observed conversion and energy efficiency are compatible with a thermal dissociation mechanism.
△ Less
Submitted 24 December, 2019;
originally announced December 2019.
-
Coaxial Microwave Plasmas in Argon: Radial Contraction, Self-Organization and more Exotic Phenomena
Authors:
E. A. D. Carbone,
S. Hübner,
E. M. van Veldhuizen,
A. Schrader,
S. Nijdam,
G. M. W. Kroesen
Abstract:
A coaxial microwave plasma setup was designed for investigation by optical and laser diagnostics. The plasma is sustained by two microwave power sources located at both ends of a coaxial line. This allows generating an axially homogeneous glow discharge at low pressure. For increasing pressures, this glow-like mode is found to be unstable and various self-organized patterns are observed including…
▽ More
A coaxial microwave plasma setup was designed for investigation by optical and laser diagnostics. The plasma is sustained by two microwave power sources located at both ends of a coaxial line. This allows generating an axially homogeneous glow discharge at low pressure. For increasing pressures, this glow-like mode is found to be unstable and various self-organized patterns are observed including finger-like structures which can be sustained after the visible end of the plasma column.
△ Less
Submitted 30 July, 2014;
originally announced July 2014.
-
PTFE treatment by remote atmospheric Ar/O2 plasmas: a simple reaction scheme model proposal
Authors:
E. A. D. Carbone,
M. W. G. M. Verhoeven,
W. Keuning,
J. J. A. M. van der Mullen
Abstract:
Polytetrafluoroethylene (PTFE) samples were treated by a remote atmospheric pressure microwave plasma torch and analyzed by water contact angle (WCA) and X-ray photoelectron spectroscopy (XPS). In the case of pure argon plasma a decrease of WCA is observed meanwhile an increase of hydrophobicity was observed when some oxygen was added to the discharge. The WCA results are correlated to XPS of refe…
▽ More
Polytetrafluoroethylene (PTFE) samples were treated by a remote atmospheric pressure microwave plasma torch and analyzed by water contact angle (WCA) and X-ray photoelectron spectroscopy (XPS). In the case of pure argon plasma a decrease of WCA is observed meanwhile an increase of hydrophobicity was observed when some oxygen was added to the discharge. The WCA results are correlated to XPS of reference samples and the change of WCA are attributed to changes in roughness of the samples. A simple kinetics scheme for the chemistry on the PTFE surface is proposed to explain the results.
△ Less
Submitted 15 March, 2013;
originally announced March 2013.
