Showing 1–50 of 57 results for author: Cao, W

Topology Design of Reconfigurable Intelligent Surfaces Based on Current Distribution and Otsu Image Segmentation

Authors: Zhen Zhang, Jun Wei Zhang, Hui Dong Li, Junhui Qiu, Lijie Wu, Wan Wan Cao, Ren Wang, Jia Nan Zhang, Qiang Cheng

Abstract: Miniaturization of reconffgurable intelligent surface RIS) elements is a crucial trend in the development of RISs. It not only facilitates the attainment of multifunctional integration but also promotes seamless amalgamation with other elements. The current on the RIS element plays a crucial role in determining the characteristics of the induced electromagnetic ffeld components. Segments with high… ▽ More Miniaturization of reconffgurable intelligent surface RIS) elements is a crucial trend in the development of RISs. It not only facilitates the attainment of multifunctional integration but also promotes seamless amalgamation with other elements. The current on the RIS element plays a crucial role in determining the characteristics of the induced electromagnetic ffeld components. Segments with high current intensity determine the performance of RIS elements. Carving the parts with strong current distribution density into the metal patch of RIS element structure can achieve miniaturization. Based on this insight, this work proposes a topology design method that leverages current distribution and image processing techniques to achieve efffcient miniaturization of the RIS elements. In this proposed method, we ffrst obtain the current distribution across different operational states and the period of the working frequency. Next, we employ the Otsu image segmentation method to extract relevant image information from the current distribution images of the RIS elements. Subsequently, we utilize linear mapping techniques to convert this image information into the structure of RIS elements. Then, based on the structure of the RIS elements, the Quasi-Newton optimization algorithm is utilized to obtain the parameters of the tunable device that correspond to various operational states. As a result, we successfully construct the structural topology of the RIS elements based on their current distribution, designing areas with strong current distribution as metal patches. To validate the performance of the proposed method, a 16 by 16 3-bit RIS was developed, fabricated and measured. Compared with existing RIS designs, the proportion of the top-layer metal patches is smaller, which provides the possibility for integrating other functions and devices. △ Less

Submitted 21 May, 2025; v1 submitted 25 February, 2025; originally announced February 2025.

Glacier data assimilation on an Arctic glacier: Learning from large ensemble twin experiments

Authors: Wenxue Cao, Kristoffer Aalstad, Louise S. Schmidt, Sebastian Westermann, Thomas V. Schuler

Abstract: Glacier modeling is crucial for quantifying the evolution of cryospheric processes. At the same time, uncertainties hamper process understanding and predictive accuracy. Here, we suggest improving glacier mass balance simulations for the Kongsvegen glacier in Svalbard through the application of Bayesian data assimilation techniques in a set of large ensemble twin experiments. Noisy synthetic obser… ▽ More Glacier modeling is crucial for quantifying the evolution of cryospheric processes. At the same time, uncertainties hamper process understanding and predictive accuracy. Here, we suggest improving glacier mass balance simulations for the Kongsvegen glacier in Svalbard through the application of Bayesian data assimilation techniques in a set of large ensemble twin experiments. Noisy synthetic observations of albedo and snow depth, generated using the multilayer CryoGrid community model with a full energy balance, are assimilated using two ensemble-based data assimilation schemes: the particle batch smoother and the ensemble smoother. A comprehensive evaluation exercise demonstrates that the joint assimilation of albedo and snow depth improves the simulation skill by up to 86% relative to the prior in specific glacier regions. The particle batch smoother excels in representing albedo dynamics, while the ensemble smoother is particularly effective for snow depth under low snowfall conditions. By combining the strengths of both observations, the joint assimilation achieves improved mass balance simulations across different glacier zones using either assimilation scheme. This work underscores the potential of ensemble-based data assimilation methods for refining glacier models by offering a robust framework to enhance predictive accuracy and reduce uncertainties in cryospheric simulations. Further advances in glacier data assimilation will be critical to better understanding the fate and role of Arctic glaciers in a changing climate. △ Less

Submitted 13 February, 2025; originally announced February 2025.

Comments: 24 pages, 8 figures, and 2 tables

Report number: JOG-2025-0019

FENN: Feature-enhanced neural network for solving partial differential equations involving fluid mechanics

Authors: Jiahao Song, Wenbo Cao, Weiwei Zhang

Abstract: Physics-informed neural networks (PINNs) have shown remarkable prospects in solving forward and inverse problems involving partial differential equations (PDEs). However, PINNs still face the challenge of high computational cost in solving strongly nonlinear PDEs involving fluid dynamics. In this study, inspired by the input design in surrogate modeling, we propose a feature-enhanced neural networ… ▽ More Physics-informed neural networks (PINNs) have shown remarkable prospects in solving forward and inverse problems involving partial differential equations (PDEs). However, PINNs still face the challenge of high computational cost in solving strongly nonlinear PDEs involving fluid dynamics. In this study, inspired by the input design in surrogate modeling, we propose a feature-enhanced neural network. By introducing geometric features including distance and angle or physical features including the solution of the potential flow equation in the inputs of PINNs, FENN can more easily learn the flow, resulting in better performance in terms of both accuracy and efficiency. We establish the feature networks in advance to avoid the invalid PDE loss in FENN caused by neglecting the partial derivatives of the features with respect to space-time coordinates. Through five numerical experiments involving forward, inverse, and parametric problems, we verify that FENN generally reduces the computational cost of PINNs by approximately four times. In addition, the numerical experiments also demonstrate that the proposed method can reduce the number of observed data for inverse problem and successfully solve the parametric problem where PINNs fail. △ Less

Submitted 21 January, 2025; originally announced January 2025.

Comments: 24 pages, 20 figures

Solving all laminar flows around airfoils all-at-once using a parametric neural network solver

Authors: Wenbo Cao, Shixiang Tang, Qianhong Ma, Wanli Ouyang, Weiwei Zhang

Abstract: Recent years have witnessed increasing research interests of physics-informed neural networks (PINNs) in solving forward, inverse, and parametric problems governed by partial differential equations (PDEs). Despite their promise, PINNs still face significant challenges in many scenarios due to ill-conditioning. Time-stepping-oriented neural network (TSONN) addresses this by reformulating the ill-co… ▽ More Recent years have witnessed increasing research interests of physics-informed neural networks (PINNs) in solving forward, inverse, and parametric problems governed by partial differential equations (PDEs). Despite their promise, PINNs still face significant challenges in many scenarios due to ill-conditioning. Time-stepping-oriented neural network (TSONN) addresses this by reformulating the ill-conditioned optimization problem into a series of well-conditioned sub-problems, greatly improving its ability to handle complex scenarios. This paper presents a new solver for laminar flow around airfoils based on TSONN and mesh transformation, validated across various test cases. Specifically, the solver achieves mean relative errors of approximately 3.6% for lift coefficients and 1.4% for drag coefficients. Furthermore, this paper extends the solver to parametric problems involving flow conditions and airfoil shapes, covering nearly all laminar flow scenarios in engineering. The shape parameter space is defined as the union of 30% perturbations applied to each airfoil in the UIUC airfoil database, with Reynolds numbers ranging from 100 to 5000 and angles of attack spanning from -5° to 15°. The parametric solver solves all laminar flows within the parameter space in just 4.6 day, at approximately 40 times the computational cost of solving a single flow. The model training involves hundreds of millions of flow conditions and airfoil shapes, ultimately yielding a surrogate model with strong generalization capability that does not require labeled data. Specifically, the surrogate model achieves average errors of 4.6% for lift coefficients and 1.1% for drag coefficients, demonstrating its potential for high generalizability, cost-effectiveness, and efficiency in addressing high-dimensional parametric problems and surrogate modeling. △ Less

Submitted 2 January, 2025; originally announced January 2025.

Interface and spectrum multiplexing ptychographic reflection microscopy

Authors: Yun Gao, Qijun You, Peixiang Lu, Wei Cao

Abstract: Reflective ptychography is a promising lensless imaging technique with a wide field of view, offering significant potential for applications in semiconductor manufacturing and detection. However, many semiconductor materials are coated with different layers during processing, which leads to the reflected diffraction light being a coherent superposition of multiple light beams. Traditional phase re… ▽ More Reflective ptychography is a promising lensless imaging technique with a wide field of view, offering significant potential for applications in semiconductor manufacturing and detection. However, many semiconductor materials are coated with different layers during processing, which leads to the reflected diffraction light being a coherent superposition of multiple light beams. Traditional phase recovery methods often overlook the multi-layered nature of these materials, resulting in artificial errors and, in some cases, failures in image reconstruction. This limitation has hindered the broader application and adoption of reflection ptychography. Here, we propose and experimentally demonstrate an innovative interface and spectrum multiplexing ptychographic reflection microscopy. By employing multi-wavelength light as the illumination source, our approach enables the accurate extraction of the wavelength-dependent surface structure imaging and topography mapping of materials in a single experiment. This advancement offers a reliable technique for element-specific detection of semiconductor materials, utilizing tabletop extreme ultraviolet light sources in the future. △ Less

Submitted 31 December, 2024; v1 submitted 15 December, 2024; originally announced December 2024.

Accelerating the Exploration of Thermal Materials via a Synergistic Strategy of DFT and Interpretable Deep Learning

Authors: Yuxuan Zeng, Wei Cao, Yijing Zuo, Tan Peng, Yue Hou, Ling Miao, Yang Yang, Ziyu Wang, Jing Shi

Abstract: Lattice thermal conductivity (LTC) is a critical parameter for thermal transport properties, playing a pivotal role in advancing thermoelectric materials and thermal management technologies. Traditional computational methods, such as Density Functional Theory (DFT) and Molecular Dynamics (MD), are resource-intensive, limiting their applicability for high-throughput LTC prediction. While AI-driven… ▽ More Lattice thermal conductivity (LTC) is a critical parameter for thermal transport properties, playing a pivotal role in advancing thermoelectric materials and thermal management technologies. Traditional computational methods, such as Density Functional Theory (DFT) and Molecular Dynamics (MD), are resource-intensive, limiting their applicability for high-throughput LTC prediction. While AI-driven approaches have made significant strides in material science, the trade-off between accuracy and interpretability remains a major bottleneck. In this study, we introduce an interpretable deep learning framework that enables rapid and accurate LTC prediction, effectively bridging the gap between interpretability and precision. Leveraging this framework, we identify and validate four promising thermal conductors/insulators using DFT and MD. Moreover, by combining sensitivity analysis with DFT calculations, we uncover novel insights into phonon thermal transport mechanisms, providing a deeper understanding of the underlying physics. This work not only accelerates the discovery of thermal materials but also sets a new benchmark for interpretable AI in material science. △ Less

Submitted 7 April, 2025; v1 submitted 8 December, 2024; originally announced December 2024.

Spatio-spectral light modulator of XUV high harmonics

Authors: Qi Zeng, Yimin Deng, Xinyue Yang, Wei Cao, Peixiang Lu

Abstract: High-order harmonic generation (HHG), characterized by its highly nonlinear nature, often exhibits a complex spatio-temporal profile that poses challenges for practical applications. In this study, we unveil a method for manipulating the spatio-spectral distribution of HHG by guiding the recollision electron trajectory in the spatio-temporal domain using a control field. The resulting far-field hi… ▽ More High-order harmonic generation (HHG), characterized by its highly nonlinear nature, often exhibits a complex spatio-temporal profile that poses challenges for practical applications. In this study, we unveil a method for manipulating the spatio-spectral distribution of HHG by guiding the recollision electron trajectory in the spatio-temporal domain using a control field. The resulting far-field high harmonic (HH) radiation inherits the intricate spatio-temporal characteristics of the control field, showcasing diverse features including spatial tilting, spectral shifting, and emission angle deflection. Using the relative delay between the control field and the driving pulse as the primary control parameter, we achieve precise tailoring of the high harmonics in the spatio-spectral domain. This controllability in HH benefits ultrafast metrology and imaging applications in the extreme ultraviolet (XUV) regime. △ Less

Submitted 8 December, 2024; originally announced December 2024.

Physics Informed Neural Networks (PINNs) as intelligent computing technique for solving partial differential equations: Limitation and Future prospects

Authors: Weiwei Zhang, Wei Suo, Jiahao Song, Wenbo Cao

Abstract: In recent years, Physics-Informed Neural Networks (PINNs) have become a representative method for solving partial differential equations (PDEs) with neural networks. PINNs provide a novel approach to solving PDEs through optimization algorithms, offering a unified framework for solving both forward and inverse problems. However, some limitations in terms of solution accuracy and generality have al… ▽ More In recent years, Physics-Informed Neural Networks (PINNs) have become a representative method for solving partial differential equations (PDEs) with neural networks. PINNs provide a novel approach to solving PDEs through optimization algorithms, offering a unified framework for solving both forward and inverse problems. However, some limitations in terms of solution accuracy and generality have also been revealed. This paper systematically summarizes the limitations of PINNs and identifies three root causes for their failure in solving PDEs: (1) Poor multiscale approximation ability and ill-conditioning caused by PDE losses; (2) Insufficient exploration of convergence and error analysis, resulting in weak mathematical rigor; (3) Inadequate integration of physical information, causing mismatch between residuals and iteration errors. By focusing on addressing these limitations in PINNs, we outline the future directions and prospects for the intelligent computing of PDEs: (1) Analysis of ill-conditioning in PINNs and mitigation strategies; (2) Improvements to PINNs by enforcing temporal causality; (3) Empowering PINNs with classical numerical methods. △ Less

Submitted 27 November, 2024; originally announced November 2024.

Comments: 30 pages, 9 figures, 3 tables

Multiple-partition cross-modulation programmable metasurface empowering wireless communications

Authors: Jun Wei Zhang, Zhen Jie Qi, Li Jie Wu, Wan Wan Cao, Xinxin Gao, Zhi Hui Fu, Jing Yu Chen, Jie Ming Lv, Zheng Xing Wang, Si Ran Wang, Jun Wei Wu, Zhen Zhang, Jia Nan Zhang, Hui Dong Li, Jun Yan Dai, Qiang Cheng, Tie Jun Cui

Abstract: With the versatile manipulation capability, programmable metasurfaces are rapidly advancing in their intelligence, integration, and commercialization levels. However, as the programmable metasurfaces scale up, their control configuration becomes increasingly complicated, posing significant challenges and limitations. Here, we propose a multiple-partition cross-modulation (MPCM) programmable metasu… ▽ More With the versatile manipulation capability, programmable metasurfaces are rapidly advancing in their intelligence, integration, and commercialization levels. However, as the programmable metasurfaces scale up, their control configuration becomes increasingly complicated, posing significant challenges and limitations. Here, we propose a multiple-partition cross-modulation (MPCM) programmable metasurface to enhance the wireless communication coverage with low hardware complexity. We firstly propose an innovative encoding scheme to multiply the control voltage vectors of row-column crossing, achieving high beamforming precision in free space while maintaining low control hardware complexity and reducing memory requirements for coding sequences. We then design and fabricate an MPCM programmable metasurface to confirm the effectiveness of the proposed encoding scheme. The simulated and experimental results show good agreements with the theoretically calculated outcomes in beam scanning across the E and H planes and in free-space beam pointing. The MPCM programmable metasurface offers strong flexibility and low complexity by allowing various numbers and combinations of partition items in modulation methods, catering to diverse precision demands in various scenarios. We demonstrate the performance of MPCM programmable metasurface in a realistic indoor setting, where the transmissions of videos to specific receiver positions are successfully achieved, surpassing the capabilities of traditional programmable metasurfaces. We believe that the proposed programmable metasurface has great potentials in significantly empowering the wireless communications while addressing the challenges associated with the programmable metasurface's design and implementation. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Performance assessment of the HERD calorimeter with a photo-diode read-out system for high-energy electron beams

Authors: O. Adriani, G. Ambrosi, M. Antonelli, Y. Bai, X. Bai, T. Bao, M. Barbanera, E. Berti, P. Betti, G. Bigongiari, M. Bongi, V. Bonvicini, S. Bottai, I. Cagnoli, W. Cao, J. Casaus, D. Cerasole, Z. Chen, X. Cui, R. D'Alessandro, L. Di Venere, C. Diaz, Y. Dong, S. Detti, M. Duranti , et al. (41 additional authors not shown)

Abstract: The measurement of cosmic rays at energies exceeding 100 TeV per nucleon is crucial for enhancing the understanding of high-energy particle propagation and acceleration models in the Galaxy. HERD is a space-borne calorimetric experiment that aims to extend the current direct measurements of cosmic rays to unexplored energies. The payload is scheduled to be installed on the Chinese Space Station in… ▽ More The measurement of cosmic rays at energies exceeding 100 TeV per nucleon is crucial for enhancing the understanding of high-energy particle propagation and acceleration models in the Galaxy. HERD is a space-borne calorimetric experiment that aims to extend the current direct measurements of cosmic rays to unexplored energies. The payload is scheduled to be installed on the Chinese Space Station in 2027. The primary peculiarity of the instrument is its capability to measure particles coming from all directions, with the main detector being a deep, homogeneous, 3D calorimeter. The active elements are read out using two independent systems: one based on wavelength shifter fibers coupled to CMOS cameras, and the other based on photo-diodes read-out with custom front-end electronics. A large calorimeter prototype was tested in 2023 during an extensive beam test campaign at CERN. In this paper, the performance of the calorimeter for high-energy electron beams, as obtained from the photo-diode system data, is presented. The prototype demonstrated excellent performance, e.g., an energy resolution better than 1% for electrons at 250 GeV. A comparison between beam test data and Monte Carlo simulation data is also presented. △ Less

Submitted 4 October, 2024; originally announced October 2024.

Journal ref: JINST 20 P02015 (2025)

Water-induced high-performance quantum-dot light-emitting diodes

Authors: Wangxiao Jin, Siyu He, Xiuyuan Lu, Xitong Zhu, Dijiong Liu, Guolong Sun, Yanlei Hao, Xiaolin Yan, Yiran Yan, Longjia Wu, Xiongfeng Lin, Wenjun Hou, Weiran Cao, Chuan Liu, Xiaoci Liang, Yuan Gao, Yunzhou Deng, Feng Gao, Yizheng Jin

Abstract: Solution-processed light-emitting diodes (LEDs) are appealing for their potential in the low-cost fabrication of large-area devices. However, the limited performance of solution-processed blue LEDs, particularly their short operation lifetime, is hindering their practical use in display technologies. Here, we demonstrate that trace water in device, previously considered detrimental to most solutio… ▽ More Solution-processed light-emitting diodes (LEDs) are appealing for their potential in the low-cost fabrication of large-area devices. However, the limited performance of solution-processed blue LEDs, particularly their short operation lifetime, is hindering their practical use in display technologies. Here, we demonstrate that trace water in device, previously considered detrimental to most solution-processed LEDs, dramatically enhances the performance of quantum-dot LEDs (QLEDs). This breakthrough stems from our comprehensive mechanism investigations into the positive ageing phenomenon, a long-standing puzzle in the QLED field. Our findings reveal that water passivation on the surface of electron-transport layers, which are composed of zinc-oxide-based nanoparticles, improves charge transport and enhances exciton radiative recombination during device operation. Combined with the advanced top-emitting architecture, our blue QLEDs achieve a high current efficiency of 35.5 cd A-1, a blue index (colour coordinate corrected current efficiency) of over 470 cd A-1 CIEy-1, and unprecedented stability, with an extrapolated T95 lifetime (at an initial brightness of 1,000 cd m-2) of 287 hours. Our work may inspire further exploration into surface passivation of nanocrystalline functional layers, critical for the advancement of emerging solution-processed optoelectronic and electronic devices. △ Less

Submitted 6 September, 2024; originally announced September 2024.

Comments: 23 pages,13 figures,1 table

Spectral multiplexing based on multi-distance lensless imaging

Authors: Qijun You, Lingshuo Meng, Yun Gao, Qing Liao, Wei Cao, Peixiang Lu

Abstract: We have demonstrated the capability of spectral multiplexing in multi-distance diffractive imaging, enabling the reconstruction of samples with diverse spectral responses. While previous methods like ptychography utilize redundancy in radial diffraction data to achieve information multiplexing, they typically require capturing a substantial amount of diffraction data. In contrast, our approach eff… ▽ More We have demonstrated the capability of spectral multiplexing in multi-distance diffractive imaging, enabling the reconstruction of samples with diverse spectral responses. While previous methods like ptychography utilize redundancy in radial diffraction data to achieve information multiplexing, they typically require capturing a substantial amount of diffraction data. In contrast, our approach effectively harnesses the redundancy information in axial diffraction data. This significantly reduces the amount of diffraction data required and relaxes the stringent requirements on optical path stability. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: 4 pages, 5 figures

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

New Interpretation for error propagation of data-driven Reynolds stress closures via global stability analysis

Authors: Xianglin Shan, Wenbo Cao, Weiwei Zhang

Abstract: In light of the challenges surrounding convergence and error propagation encountered in Reynolds-averaged Navier-Stokes (RANS) equations with data-driven Reynolds stress closures, researchers commonly attribute these issues to ill-conditioning through conditional number analysis. This paper delves into an additional factor, numerical instability, contributing to these challenges. We conduct global… ▽ More In light of the challenges surrounding convergence and error propagation encountered in Reynolds-averaged Navier-Stokes (RANS) equations with data-driven Reynolds stress closures, researchers commonly attribute these issues to ill-conditioning through conditional number analysis. This paper delves into an additional factor, numerical instability, contributing to these challenges. We conduct global stability analysis for the RANS equations, closed by the Reynolds stress of direct numerical simulation (DNS), with the time-averaged solution of DNS as the base flow. Our findings reveal that, for turbulent channel flow at high Reynolds numbers, significant ill-conditioning exists, yet the system remains stable. Conversely, for separated flow over periodic hills, notable ill-conditioning is absent, but unstable eigenvalues are present, indicating that error propagation arises from the mechanism of numerical instability. Furthermore, the effectiveness of the decomposition method employing eddy viscosity is compared, results show that the spatial distribution and amplitude of eddy viscosity influences the numerical stability. △ Less

Submitted 4 May, 2024; originally announced May 2024.

Comments: 11 pages, 5 figures

An analysis and solution of ill-conditioning in physics-informed neural networks

Authors: Wenbo Cao, Weiwei Zhang

Abstract: Physics-informed neural networks (PINNs) have recently emerged as a novel and popular approach for solving forward and inverse problems involving partial differential equations (PDEs). However, achieving stable training and obtaining correct results remain a challenge in many cases, often attributed to the ill-conditioning of PINNs. Nonetheless, further analysis is still lacking, severely limiting… ▽ More Physics-informed neural networks (PINNs) have recently emerged as a novel and popular approach for solving forward and inverse problems involving partial differential equations (PDEs). However, achieving stable training and obtaining correct results remain a challenge in many cases, often attributed to the ill-conditioning of PINNs. Nonetheless, further analysis is still lacking, severely limiting the progress and applications of PINNs in complex engineering problems. Drawing inspiration from the ill-conditioning analysis in traditional numerical methods, we establish a connection between the ill-conditioning of PINNs and the ill-conditioning of the Jacobian matrix of the PDE system. Specifically, for any given PDE system, we construct its controlled system. This controlled system allows for adjustment of the condition number of the Jacobian matrix while retaining the same solution as the original system. Our numerical findings suggest that the ill-conditioning observed in PINNs predominantly stems from the Jacobian matrix. As the condition number of the Jacobian matrix decreases, PINNs exhibit faster convergence rates and higher accuracy. Building upon this understanding and the natural extension of controlled systems, we present a general approach to mitigate the ill-conditioning of PINNs, leading to successful simulations of the three-dimensional flow around the M6 wing at a Reynolds number of 5,000. To the best of our knowledge, this is the first time that PINNs have been successful in simulating such complex systems, offering a promising new technique for addressing industrial complexity problems. Our findings also offer valuable insights guiding the future development of PINNs. △ Less

Submitted 24 May, 2024; v1 submitted 3 May, 2024; originally announced May 2024.

High Resolution Imaging Spectroscopy of a Tiny Sigmoidal Mini-filament Eruption

Authors: Jiasheng Wang, Jeongwoo Lee, Jongchul Chae, Yan Xu, Wenda Cao, Haimin Wang

Abstract: Minifilament (MF) eruption producing small jets and micro-flares is regarded as an important source for coronal heating and the solar wind transients through studies mostly based on coronal observations in the extreme ultraviolet (EUV) and X-ray wavelengths. In this study, we focus on the chromospheric plasma diagnostics of a tiny minifilament in quiet Sun located at [71'', 450''] on 2021--08--07… ▽ More Minifilament (MF) eruption producing small jets and micro-flares is regarded as an important source for coronal heating and the solar wind transients through studies mostly based on coronal observations in the extreme ultraviolet (EUV) and X-ray wavelengths. In this study, we focus on the chromospheric plasma diagnostics of a tiny minifilament in quiet Sun located at [71'', 450''] on 2021--08--07 at 19:11 UT observed as part of the ninth encounter of the PSP campaign. Main data obtained are the high cadence, high resolution spectroscopy from the Fast Imaging Solar Spectrograph (FISS) and high-resolution magnetograms from the Near InfraRed Imaging Spectropolarimeter (NIRIS) on the 1.6~m Goode Solar Telescope (GST) at Big Bear Solar Observatory (BBSO). The mini-filament with size $\sim$1''$\times$5'' and a micro-flare are detected in both the H$α$ line center and SDO/AIA 193, 304~Å images. On the NIRIS magnetogram, we found that the cancellation of a magnetic bipole in the footpoints of the minifilament triggered its eruption in a sigmoidal shape. By inversion of the \ha\ and Ca {\sc ii} spectra under the embedded cloud model, we found a temperature increase of 3,800 K in the brightening region, associated with rising speed average of MF increased by 18~$km~s^{-1}$. This cool plasma is also found in the EUV images. We estimate the kinetic energy change of the rising filament as 1.5$\times$$10^{25}$~ergs, and thermal energy accumulation in the MF, 1.4$\times$$10^{25}$~ergs. From the photospheric magnetograms, we find the magnetic energy change is 1.6$\times$$10^{26}$~ergs across the PIL of converging opposite magnetic elements, which amounts to the energy release in the chromosphere in this smallest two-ribbon flare ever observed. △ Less

Submitted 13 February, 2024; originally announced February 2024.

A solver for subsonic flow around airfoils based on physics-informed neural networks and mesh transformation

Authors: Wenbo Cao, Jiahao Song, Weiwei Zhang

Abstract: Physics-informed neural networks (PINNs) have recently become a new popular method for solving forward and inverse problems governed by partial differential equations (PDEs). However, in the flow around airfoils, the fluid is greatly accelerated near the leading edge, resulting in a local sharper transition, which is difficult to capture by PINNs. Therefore, PINNs are still rarely used to solve th… ▽ More Physics-informed neural networks (PINNs) have recently become a new popular method for solving forward and inverse problems governed by partial differential equations (PDEs). However, in the flow around airfoils, the fluid is greatly accelerated near the leading edge, resulting in a local sharper transition, which is difficult to capture by PINNs. Therefore, PINNs are still rarely used to solve the flow around airfoils. In this study, we combine physical-informed neural networks with mesh transformation, using neural network to learn the flow in the uniform computational space instead of physical space. Mesh transformation avoids the network from capturing the local sharper transition and learning flow with internal boundary (wall boundary). We successfully solve inviscid flow and provide an open-source subsonic flow solver for arbitrary airfoils. Our results show that the solver exhibits higher-order attributes, achieving nearly an order of magnitude error reduction over second-order finite volume methods (FVM) on very sparse meshes. Limited by the learning ability and optimization difficulties of neural network, the accuracy of this solver will not improve significantly with mesh refinement. Nevertheless, it achieves comparable accuracy and efficiency to second-order FVM on fine meshes. Finally, we highlight the significant advantage of the solver in solving parametric problems, as it can efficiently obtain solutions in the continuous parameter space about the angle of attack. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Comments: arXiv admin note: text overlap with arXiv:2401.07203

Journal ref: Physics of Fluids 36, 027134 (2024)

A complete state-space solution model for inviscid flow around airfoils based on physics-informed neural networks

Authors: Wenbo Cao, Jiahao Song, Weiwei Zhang

Abstract: Engineering problems often involve solving partial differential equations (PDEs) over a range of similar problem setups with various state parameters. In traditional numerical methods, each problem is solved independently, resulting in many repetitive tasks and expensive computational costs. Data-driven modeling has alleviated these issues, enabling fast solution prediction. Nevertheless, it still… ▽ More Engineering problems often involve solving partial differential equations (PDEs) over a range of similar problem setups with various state parameters. In traditional numerical methods, each problem is solved independently, resulting in many repetitive tasks and expensive computational costs. Data-driven modeling has alleviated these issues, enabling fast solution prediction. Nevertheless, it still requires expensive labeled data and faces limitations in modeling accuracy, generalization, and uncertainty. The recently developed methods for solving PDEs through neural network optimization, such as physics-informed neural networks (PINN), enable the simultaneous solution of a series of similar problems. However, these methods still face challenges in achieving stable training and obtaining correct results in many engineering problems. In prior research, we combined PINN with mesh transformation, using neural network to learn the solution of PDEs in the computational space instead of physical space. This approach proved successful in solving inviscid flow around airfoils. In this study, we expand the input dimensions of the model to include shape parameters and flow conditions, forming an input encompassing the complete state-space (i.e., all parameters determining the solution are included in the input). Our results show that the model has significant advantages in solving high-dimensional parametric problems, achieving continuous solutions in a broad state-space in only about 18.8 hours. This is a task that traditional numerical methods struggle to accomplish. Once established, the model can efficiently complete airfoil flow simulation and shape inverse design tasks in approximately 1 second. Furthermore, we introduce a pretraining-finetuning method, enabling the fine-tuning of the model for the task of interest and quickly achieving accuracy comparable to the finite volume method. △ Less

Submitted 13 January, 2024; originally announced January 2024.

Journal ref: Journal of Computational Physics 516, 113285, 2024

Near-real-time monitoring of global ocean carbon sink

Authors: Piyu Ke, Xiaofan Gui, Wei Cao, Dezhi Wang, Ce Hou, Lixing Wang, Xuanren Song, Yun Li, Biqing Zhu, Jiang Bian, Stephen Sitch, Philippe Ciais, Pierre Friedlingstein, Zhu Liu

Abstract: Mitigation of climate change will highly rely on a carbon emission trajectory that achieves carbon neutrality by the 2050s. The ocean plays a critical role in modulating climate change by sequestering CO2 from the atmosphere. Relying on the multidisciplinary cutting-edge methodologies and technologies, the near-real-time monitoring of global ocean carbon sinks from January 2022 to July 2023 aims t… ▽ More Mitigation of climate change will highly rely on a carbon emission trajectory that achieves carbon neutrality by the 2050s. The ocean plays a critical role in modulating climate change by sequestering CO2 from the atmosphere. Relying on the multidisciplinary cutting-edge methodologies and technologies, the near-real-time monitoring of global ocean carbon sinks from January 2022 to July 2023 aims to provide the world's latest assessment of monthly and gridded global ocean carbon sinks based on machine learning and other data science technologies. The project will help us find a robust route to deal with climate change, which will significantly promote the ocean carbon sinks research and will be of great interest for policy makers, researchers, and the public. This research aims to build up an integrated machine learning framework and methodology for assessing global ocean carbon neutral process; development of near-real-time dataset; development of visualization platform; research papers published in international prestigious journals; an executive report openly accessible to policy makers and the public. △ Less

Submitted 4 December, 2023; originally announced December 2023.

TSONN: Time-stepping-oriented neural network for solving partial differential equations

Authors: Wenbo Cao, Weiwei Zhang

Abstract: Deep neural networks (DNNs), especially physics-informed neural networks (PINNs), have recently become a new popular method for solving forward and inverse problems governed by partial differential equations (PDEs). However, these methods still face challenges in achieving stable training and obtaining correct results in many problems, since minimizing PDE residuals with PDE-based soft constraint… ▽ More Deep neural networks (DNNs), especially physics-informed neural networks (PINNs), have recently become a new popular method for solving forward and inverse problems governed by partial differential equations (PDEs). However, these methods still face challenges in achieving stable training and obtaining correct results in many problems, since minimizing PDE residuals with PDE-based soft constraint make the problem ill-conditioned. Different from all existing methods that directly minimize PDE residuals, this work integrates time-stepping method with deep learning, and transforms the original ill-conditioned optimization problem into a series of well-conditioned sub-problems over given pseudo time intervals. The convergence of model training is significantly improved by following the trajectory of the pseudo time-stepping process, yielding a robust optimization-based PDE solver. Our results show that the proposed method achieves stable training and correct results in many problems that standard PINNs fail to solve, requiring only a simple modification on the loss function. In addition, we demonstrate several novel properties and advantages of time-stepping methods within the framework of neural network-based optimization approach, in comparison to traditional grid-based numerical method. Specifically, explicit scheme allows significantly larger time step, while implicit scheme can be implemented as straightforwardly as explicit scheme. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Numerical strategy on the grid orientation effect in the simulation for two-phase flow in porous media by using the adaptive artificial viscosity method

Authors: Xiao-Hong Wang, Meng-Chen Yue, Zhi-Feng Liu, Wei-Dong Cao, Yong Wang, Jun Hu, Chang-Hao Xiao, Yao-Yong Li

Abstract: It is a challenge to numerically solve nonlinear partial differential equations whose solution involves discontinuity. In the context of numerical simulators for multi-phase flow in porous media, there exists a long-standing issue known as Grid Orientation Effect (GOE), wherein different numerical solutions can be obtained when considering grids with different orientations under certain unfavorabl… ▽ More It is a challenge to numerically solve nonlinear partial differential equations whose solution involves discontinuity. In the context of numerical simulators for multi-phase flow in porous media, there exists a long-standing issue known as Grid Orientation Effect (GOE), wherein different numerical solutions can be obtained when considering grids with different orientations under certain unfavorable conditions. Our perspective is that GOE arises due to numerical instability near displacement fronts, where spurious oscillations accompanied by sharp fronts, if not adequately suppressed, lead to GOE. To reduce or even eliminate GOE, we propose augmenting adaptive artificial viscosity when solving the saturation equation. It has been demonstrated that appropriate artificial viscosity can effectively reduce or even eliminate GOE. The proposed numerical method can be easily applied in practical engineering problems. △ Less

Submitted 13 August, 2023; originally announced August 2023.

Comments: 10 pages

MilliKelvin microwave impedance microscopy in a dry dilution refrigerator

Authors: Leonard Weihao Cao, Chen Wu, Rajarshi Bhattacharyya, Ruolun Zhang, Monica T. Allen

Abstract: Microwave impedance microscopy (MIM) is a near-field imaging technique that has been used to visualize the local conductivity of materials with nanoscale resolution across the GHz regime. In recent years, MIM has shown great promise for the investigation of topological states of matter, correlated electronic states and emergent phenomena in quantum materials. To explore these low-energy phenomena,… ▽ More Microwave impedance microscopy (MIM) is a near-field imaging technique that has been used to visualize the local conductivity of materials with nanoscale resolution across the GHz regime. In recent years, MIM has shown great promise for the investigation of topological states of matter, correlated electronic states and emergent phenomena in quantum materials. To explore these low-energy phenomena, many of which are only detectable in the milliKelvin regime, we have developed a novel low-temperature MIM incorporated into a dilution refrigerator. This setup which consists of a tuning-fork-based atomic force microscope with microwave reflectometry capabilities, is capable of reaching temperatures down to 70 mK during imaging and magnetic fields up to 9 T. To test the performance of this microscope, we demonstrate microwave imaging of the conductivity contrast between graphite and silicon dioxide at cryogenic temperatures and discuss the resolution and noise observed in these results. We extend this methodology to visualize edge conduction in Dirac semimetal cadmium arsenide in the quantum Hall regime △ Less

Submitted 29 September, 2023; v1 submitted 5 May, 2023; originally announced May 2023.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Review of Scientific Instruments and may be found at doi.org/10.1063/5.0159548

Journal ref: Volume 94, Issue 9, Year 2023

Magnetic outbreak associated with exploding granulations

Authors: Chunlan Jin, Guiping Zhou, Guiping Ruan, T. Baildon, Wenda Cao, Jingxiu Wang

Abstract: Diagnosing the spatial-temporal pattern of magnetic flux on the Sun is vital for understanding the origin of solar magnetism and activity. Here, we report a new form of flux appearance, magnetic outbreak, using observations with an extremely high spatial resolution of 0.16 arcsec from the 1.6-m Goode Solar Telescope (GST) at the Big Bear Solar Observatory. Magnetic outbreak refers to an early grow… ▽ More Diagnosing the spatial-temporal pattern of magnetic flux on the Sun is vital for understanding the origin of solar magnetism and activity. Here, we report a new form of flux appearance, magnetic outbreak, using observations with an extremely high spatial resolution of 0.16 arcsec from the 1.6-m Goode Solar Telescope (GST) at the Big Bear Solar Observatory. Magnetic outbreak refers to an early growth of unipolar magnetic flux and its later explosion into fragments, in association with plasma upflow and exploding granulations; each individual fragment has flux of 10$^{16}$-10$^{17}$ Mx, moving apart with velocity of 0.5-2.2 km/s. The magnetic outbreak takes place in the hecto-Gauss region of pore moats. In this study, we identify six events of magnetic outbreak during 6-hour observations over an approximate 40$\times$40 arcsec$^{2}$ field of view. The newly discovered magnetic outbreak might be the first evidence of the long-anticipated convective blowup. △ Less

Submitted 8 December, 2022; originally announced December 2022.

Comments: 22 pages, 6 figures, accepted by ApJL

Intensity modulated proton arc therapy via geometry-based energy selection for ependymoma

Authors: Wenhua Cao, Yupeng Li, Xiaodong Zhang, Falk Poenisch, Pablo Yepes, Narayan Sahoo, David Grosshans, Susan McGovern, G. Brandon Gunn, Steven J. Frank, Xiaorong R. Zhu

Abstract: We developed a novel method of creating intensity modulated proton arc therapy (IMPAT) plans that uses computing resources efficiently and may offer a dosimetric benefit for patients with ependymoma or similar tumor geometries. Our IMPAT planning method consists of a geometry-based energy selection step with major scanning spot contributions as inputs computed using ray-tracing and single-Gaussian… ▽ More We developed a novel method of creating intensity modulated proton arc therapy (IMPAT) plans that uses computing resources efficiently and may offer a dosimetric benefit for patients with ependymoma or similar tumor geometries. Our IMPAT planning method consists of a geometry-based energy selection step with major scanning spot contributions as inputs computed using ray-tracing and single-Gaussian approximation of lateral spot profiles. Based on the geometric relation of scanning spots and dose voxels, our energy selection module selects a minimum set of energy layers at each gantry angle such that each target voxel is covered by sufficient scanning spots as specified by the planner, with dose contributions above the specified threshold. Finally, IMPAT plans are generated by robustly optimizing scanning spots of the selected energy layers using a commercial proton treatment planning system. The IMPAT plan quality was assessed for four ependymoma patients. Reference three-field IMPT plans were created with similar planning objective functions and compared with the IMPAT plans. In all plans, the prescribed dose covered 95% of the clinical target volume (CTV) while maintaining similar maximum doses for the brainstem. While IMPAT and IMPT achieved comparable plan robustness, the IMPAT plans achieved better homogeneity and conformity than the IMPT plans. The IMPAT plans also exhibited higher relative biological effectiveness (RBE) enhancement than did the corresponding reference IMPT plans for the CTV in all four patients and brainstem in three of them. The proposed method demonstrated potential as an efficient technique for IMPAT planning and may offer a dosimetric benefit for patients with ependymoma or tumors in close proximity to critical organs. IMPAT plans created using this method had elevated RBE enhancement associated with increased linear energy transfer. △ Less

Submitted 23 November, 2022; originally announced November 2022.

Comments: 24 pages with 8 figures and 2 tables

Constructing multi-level urban clusters based on population distributions and interactions

Authors: Wenpu Cao, Lei Dong, Ying Cheng, Lun Wu, Qinghua Guo, Yu Liu

Abstract: A city (or an urban cluster) is not an isolated spatial unit, but a combination of areas with closely linked socio-economic activities. However, so far, we lack a consistent and quantitative approach to define multi-level urban clusters through these socio-economic connections. Here, using granular population distribution and flow data from China, we propose a bottom-up aggregation approach to qua… ▽ More A city (or an urban cluster) is not an isolated spatial unit, but a combination of areas with closely linked socio-economic activities. However, so far, we lack a consistent and quantitative approach to define multi-level urban clusters through these socio-economic connections. Here, using granular population distribution and flow data from China, we propose a bottom-up aggregation approach to quantify urban clusters at multiple spatial scales. We reveal six 'phases' (i.e., levels) in the population density-flow diagram, each of which corresponds to a spatial configuration of urban clusters from large to small. Besides, our results show that Zipf's law appears only after the fifth level, confirming the spatially dependent nature of urban laws. Our approach does not need pre-defined administrative boundaries and can be applied effectively on a global scale. △ Less

Submitted 9 November, 2022; originally announced November 2022.

Deep Learning-Based Dose Prediction for Automated, Individualized Quality Assurance of Head and Neck Radiation Therapy Plans

Authors: Mary P. Gronberg, Beth M. Beadle, Adam S. Garden, Heath Skinner, Skylar Gay, Tucker Netherton, Wenhua Cao, Carlos E. Cardenas, Christine Chung, David Fuentes, Clifton D. Fuller, Rebecca M. Howell, Anuja Jhingran, Tze Yee Lim, Barbara Marquez, Raymond Mumme, Adenike M. Olanrewaju, Christine B. Peterson, Ivan Vazquez, Thomas J. Whitaker, Zachary Wooten, Ming Yang, Laurence E. Court

Abstract: Purpose: This study aimed to use deep learning-based dose prediction to assess head and neck (HN) plan quality and identify suboptimal plans. Methods: A total of 245 VMAT HN plans were created using RapidPlan knowledge-based planning (KBP). A subset of 112 high-quality plans was selected under the supervision of an HN radiation oncologist. We trained a 3D Dense Dilated U-Net architecture to pred… ▽ More Purpose: This study aimed to use deep learning-based dose prediction to assess head and neck (HN) plan quality and identify suboptimal plans. Methods: A total of 245 VMAT HN plans were created using RapidPlan knowledge-based planning (KBP). A subset of 112 high-quality plans was selected under the supervision of an HN radiation oncologist. We trained a 3D Dense Dilated U-Net architecture to predict 3-dimensional dose distributions using 3-fold cross-validation on 90 plans. Model inputs included CT images, target prescriptions, and contours for targets and organs at risk (OARs). The model's performance was assessed on the remaining 22 test plans. We then tested the application of the dose prediction model for automated review of plan quality. Dose distributions were predicted on 14 clinical plans. The predicted versus clinical OAR dose metrics were compared to flag OARs with suboptimal normal tissue sparing using a 2 Gy dose difference or 3% dose-volume threshold. OAR flags were compared to manual flags by 3 HN radiation oncologists. Results: The predicted dose distributions were of comparable quality to the KBP plans. The differences between the predicted and KBP-planned D1%, D95%, and D99% across the targets were within -2.53%(SD=1.34%), -0.42%(SD=1.27%), and -0.12%(SD=1.97%), respectively, and the OAR mean and maximum doses were within -0.33Gy(SD=1.40Gy) and -0.96Gy(SD=2.08Gy). For the plan quality assessment study, radiation oncologists flagged 47 OARs for possible plan improvement. There was high interphysician variability; 83% of physician-flagged OARs were flagged by only one of 3 physicians. The comparative dose prediction model flagged 63 OARs, including 30 of 47 physician-flagged OARs. Conclusion: Deep learning can predict high-quality dose distributions, which can be used as comparative dose distributions for automated, individualized assessment of HN plan quality. △ Less

Submitted 25 April, 2023; v1 submitted 28 September, 2022; originally announced September 2022.

Comments: updated to reflect the published peer-reviewed article

Journal ref: Practical Radiation Oncology, Volume 13, Issue 3, May-June 2023, Pages e282-e291

Demonstration of fully integrated parity-time-symmetric electronics

Authors: Weidong Cao, Changqing Wang, Weijian Chen, Song Hu, Hua Wang, Lan Yang, Xuan Zhang

Abstract: Harnessing parity-time (PT) symmetry with balanced gain and loss profiles has created a variety of opportunities in electronics from wireless energy transfer to telemetry sensing and topological defect engineering. However, existing implementations often employ ad-hoc approaches at low operating frequencies and are unable to accommodate large-scale integration. Here, we report a fully integrated r… ▽ More Harnessing parity-time (PT) symmetry with balanced gain and loss profiles has created a variety of opportunities in electronics from wireless energy transfer to telemetry sensing and topological defect engineering. However, existing implementations often employ ad-hoc approaches at low operating frequencies and are unable to accommodate large-scale integration. Here, we report a fully integrated realization of PT-symmetry in a standard complementary metal-oxide-semiconductor technology. Our work demonstrates salient PT-symmetry features such as phase transition as well as the ability to manipulate broadband microwave generation and propagation beyond the limitations encountered by exiting schemes. The system shows 2.1 times bandwidth and 30 percentage noise reduction compared to conventional microwave generation in oscillatory mode and displays large non-reciprocal microwave transport from 2.75 to 3.10 gigahertz in non-oscillatory mode due to enhanced nonlinearities. This approach could enrich integrated circuit (IC) design methodology beyond well-established performance limits and enable the use of scalable IC technology to study topological effects in high-dimensional non-Hermitian systems. △ Less

Submitted 23 July, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 52 pages (16 pages Main Text, 28 pages Supplementary Materials, 4 pages reference), 27 figures (4 figures Main Text, 23 figures Supplementary Materials), 93 references (50 references Main Text, 43 references Supplementary Materials)

Family of Two Dimensional Transition Metal Dichlorides Fundamental Properties, Structural Defects, and Environmental Stability

Authors: Andrey A. Kistanov, Stepan A. Shcherbinin, Romain Botella, Artur Davletshin, Wei Cao

Abstract: A large number of novel two-dimensional (2D) materials are constantly discovered and deposed into the databases. Consolidate implementation of machine learning algorithms and density functional theory (DFT) based predictions have allowed creating several databases containing an unimaginable amount of 2D samples. The next step in this chain, the investigation leads to a comprehensive study of the f… ▽ More A large number of novel two-dimensional (2D) materials are constantly discovered and deposed into the databases. Consolidate implementation of machine learning algorithms and density functional theory (DFT) based predictions have allowed creating several databases containing an unimaginable amount of 2D samples. The next step in this chain, the investigation leads to a comprehensive study of the functionality of the invented materials. In this work, a family of transition metal dichlorides has been screened out for systematical investigation of their structural stability, fundamental properties, structural defects, and environmental stability via DFT based calculations. The work highlights the importance of using the potential of the invented materials and proposes a comprehensive characterization of a new family of 2D materials. △ Less

Submitted 29 April, 2022; originally announced May 2022.

Electric Field Induced Macroscopic Cellular Phase of Nanoparticles

Authors: Abigail Rendos, Wenhan Cao, Margaret Chern, Marco Lauricella, Sauro Succi, Joerg G. Werner, Allison M. Dennis, Keith A. Brown

Abstract: A suspension of nanoparticles with very low volume fraction is found to assemble into a macroscopic cellular phase under the collective influence of AC and DC voltages. Systematic study of this phase transition shows that it was the result of electrophoretic assembly into a two-dimensional configuration followed by spinodal decomposition into particle-rich walls and particle-poor cells mediated pr… ▽ More A suspension of nanoparticles with very low volume fraction is found to assemble into a macroscopic cellular phase under the collective influence of AC and DC voltages. Systematic study of this phase transition shows that it was the result of electrophoretic assembly into a two-dimensional configuration followed by spinodal decomposition into particle-rich walls and particle-poor cells mediated principally by electrohydrodynamic flow. This mechanistic understanding reveals two characteristics needed for a cellular phase to form, namely 1) a system that is considered two dimensional and 2) short-range attractive, long-range repulsive interparticle interactions. In addition to determining the mechanism underpinning the formation of the cellular phase, this work presents a method to reversibly assemble microscale continuous structures out of nanoscale particles in a manner that may enable the creation of materials that impact diverse fields including energy storage and filtration. △ Less

Submitted 30 November, 2021; originally announced December 2021.

Comments: 25 pages, 14 figures

High Reynolds number airfoil turbulence modeling method based on machine learning technique

Authors: Xuxiang Sun, Wenbo Cao, Yilang Liu, Linyang Zhu, Weiwei Zhang

Abstract: In this paper, a turbulence model based on deep neural network is developed for turbulent flow around airfoil at high Reynolds numbers. According to the data got from the Spalart-Allmaras (SA) turbulence model, we build a neural network model that maps flow features to eddy viscosity. The model is then used to replace the SA turbulence model to mutually couple with the CFD solver. We build this su… ▽ More In this paper, a turbulence model based on deep neural network is developed for turbulent flow around airfoil at high Reynolds numbers. According to the data got from the Spalart-Allmaras (SA) turbulence model, we build a neural network model that maps flow features to eddy viscosity. The model is then used to replace the SA turbulence model to mutually couple with the CFD solver. We build this suitable data-driven turbulence model mainly from the inputs, outputs features and loss function of the model. A feature selection method based on feature importance is also implemented. The results show that this feature selection method can effectively remove redundant features. The model based on the new input features has better accuracy and stability in mutual coupling with the CFD solver. The force coefficient obtained from solution can match the sample data well. The developed model also shows strong generalization at different inflow condition (angle of attack, Mach number, Reynolds number and airfoil). △ Less

Submitted 26 November, 2021; originally announced November 2021.

Impact of pandemic fatigue on the spread of COVID-19: a mathematical modelling study

Authors: Disheng Tang, Wei Cao, Jiang Bian, Tie-Yan Liu, Zhifeng Gao, Shun Zheng, Jue Liu

Abstract: In late-2020, many countries around the world faced another surge in number of confirmed cases of COVID-19, including United Kingdom, Canada, Brazil, United States, etc., which resulted in a large nationwide and even worldwide wave. While there have been indications that precaution fatigue could be a key factor, no scientific evidence has been provided so far. We used a stochastic metapopulation m… ▽ More In late-2020, many countries around the world faced another surge in number of confirmed cases of COVID-19, including United Kingdom, Canada, Brazil, United States, etc., which resulted in a large nationwide and even worldwide wave. While there have been indications that precaution fatigue could be a key factor, no scientific evidence has been provided so far. We used a stochastic metapopulation model with a hierarchical structure and fitted the model to the positive cases in the US from the start of outbreak to the end of 2020. We incorporated non-pharmaceutical interventions (NPIs) into this model by assuming that the precaution strength grows with positive cases and studied two types of pandemic fatigue. We found that people in most states and in the whole US respond to the outbreak in a sublinear manner (with exponent k=0.5), while only three states (Massachusetts, New York and New Jersey) have linear reaction (k=1). Case fatigue (decline in people's vigilance to positive cases) is responsible for 58% of cases, while precaution fatigue (decay of maximal fraction of vigilant group) accounts for 26% cases. If there were no pandemic fatigue (no case fatigue and no precaution fatigue), total positive cases would have reduced by 68% on average. Our study shows that pandemic fatigue is the major cause of the worsening situation of COVID-19 in United States. Reduced vigilance is responsible for most positive cases, and higher mortality rate tends to push local people to react to the outbreak faster and maintain vigilant for longer time. △ Less

Submitted 9 April, 2021; originally announced April 2021.

High-Sensitivity Iodine Imaging by Combining Spectral CT Technologies

Authors: Matthew Tivnan, Grace Gang, Wenchao Cao, Nadav Shapira, Peter B. Noel, J. Webster Stayman

Abstract: Spectral CT offers enhanced material discrimination over single-energy systems and enables quantitative estimation of basis material density images. Water/iodine decomposition in contrast-enhanced CT is one of the most widespread applications of this technology in the clinic. However, low concentrations of iodine can be difficult to estimate accurately, limiting potential clinical applications and… ▽ More Spectral CT offers enhanced material discrimination over single-energy systems and enables quantitative estimation of basis material density images. Water/iodine decomposition in contrast-enhanced CT is one of the most widespread applications of this technology in the clinic. However, low concentrations of iodine can be difficult to estimate accurately, limiting potential clinical applications and/or raising injected contrast agent requirements. We seek high-sensitivity spectral CT system designs which minimize noise in water/iodine density estimates. In this work, we present a model-driven framework for spectral CT system design optimization to maximize material separability. We apply this tool to optimize the sensitivity spectra on a spectral CT test bench using a hybrid design which combines source kVp control and k-edge filtration. Following design optimization, we scanned a water/iodine phantom with the hybrid spectral CT system and performed dose-normalized comparisons to two single-technique designs which use only kVp control or only kedge filtration. The material decomposition results show that the hybrid system reduces both standard deviation and crossmaterial noise correlations compared to the designs where the constituent technologies are used individually. △ Less

Submitted 29 March, 2021; originally announced March 2021.

Incorporation of Si atoms into CrCoNiFe high-entropy alloy: a DFT study

Authors: S. Assa Aravindh, Andrey A. Kistanov, Matti Alatalo, Jukka Kömi, Marko Huttula, Wei Cao

Abstract: Density functional theory based computational study has been conducted in order to investigate the effect of substitution of Cr and Co components by Si on the structure, mechanical, electronic, and magnetic properties of the high entropy alloy CrCoNiFe. It is found that the presence of a moderate concentration of Si substitutes (up to 12.5 %) does not significantly reduce the structural and mechan… ▽ More Density functional theory based computational study has been conducted in order to investigate the effect of substitution of Cr and Co components by Si on the structure, mechanical, electronic, and magnetic properties of the high entropy alloy CrCoNiFe. It is found that the presence of a moderate concentration of Si substitutes (up to 12.5 %) does not significantly reduce the structural and mechanical stability of CrCoNiFe while it may modify its electronic and magnetic properties. Based on that, Si is proposed as a cheap and functional material for partial substitution of Cr or Co in CrCoNiFe. △ Less

Submitted 12 March, 2021; originally announced March 2021.

Fingerprint of the Interbond Electron Hopping in Second-Order Harmonic Generation

Authors: Liang Li, Tengfei Huang, Pengfei Lan, Yinfu Zhang, Jiapeng Li, Xiaosong Zhu, Lixin He, Wei Cao, Peixiang Lu

Abstract: We experimentally explore the fingerprint of the microscopic electron dynamics in second-order harmonic generation (SHG). It is shown that the interbond electron hopping induces a novel source of nonlinear polarization and plays an important role even when the driving laser intensity is 2 orders of magnitude lower than the characteristic atomic field. Our model predicts anomalous anisotropic struc… ▽ More We experimentally explore the fingerprint of the microscopic electron dynamics in second-order harmonic generation (SHG). It is shown that the interbond electron hopping induces a novel source of nonlinear polarization and plays an important role even when the driving laser intensity is 2 orders of magnitude lower than the characteristic atomic field. Our model predicts anomalous anisotropic structures of the SHG yield contributed by the interbond electron hopping, which is identified in our experiments with ZnO crystals. Moreover, a generalized second-order susceptibility with an explicit form is proposed, which provides a unified description in both the weak and strong field regimes. Our work reveals the nonlinear responses of materials at the electron scale and extends the nonlinear optics to a previously unexplored regime, where the nonlinearity related to the interbond electron hopping becomes dominant. It paves the way for realizing controllable nonlinearity on an ultrafast time scale. △ Less

Submitted 22 February, 2022; v1 submitted 25 October, 2020; originally announced October 2020.

Journal ref: Physical Review Letters 128, 027401 (2022)

Strong field induced electron density tide in high harmonic generation from solids

Authors: Liang Li, Yinfu Zhang, Pengfei Lan, Tengfei Huang, Xiaosong Zhu, Chunyang Zhai, Ke Yang, Lixin He, Qingbin Zhang, Wei Cao, Peixiang Lu

Abstract: In strong laser fields, the electron density in solids can show up tidal motions caused by the laser ``pulling'' on the electrons, which forms an electron density tide (EDT). However, the strong field processes in solids are always explained by the single-active-electron (SAE) model and the fluctuation of background electrons is neglected previously. Here, we demonstrate the strong field induced E… ▽ More In strong laser fields, the electron density in solids can show up tidal motions caused by the laser ``pulling'' on the electrons, which forms an electron density tide (EDT). However, the strong field processes in solids are always explained by the single-active-electron (SAE) model and the fluctuation of background electrons is neglected previously. Here, we demonstrate the strong field induced EDT effect and propose a model for revealing its role in high harmoinc generation (HHG) from solids. We show that the EDT effect induces an additional polarization current beyond the SAE approximation. It gives a new mechanism for HHG and leads to new anisotropic structures, which are experimentally observed with MgO. Our experiment indicates that the EDT effect becomes more obvious with increasing the laser intensity. Our work establishes the bridge between the HHG and the microscopic EDT in solids induced by the strong laser field, which paves the way to probe the ultrafast electron dynamics. △ Less

Submitted 30 May, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Lett. 126, 187401 (2021)

Coulomb focusing in retrapped ionization with near-circularly polarized laser field

Authors: Xiang Huang, Qingbin Zhang, Shengliang Xu, Xianglong Fu, Xu Han, Wei Cao, Peixiang Lu

Abstract: The full three-dimensional photoelectron momentum distributions of argon are measured in intense near-circularly polarized laser fields. We observed that the transverse momentum distribution of ejected electrons by 410-nm near-circularly polarized field is unexpectedly narrowed with increasing laser intensity, which is contrary to the conventional rules predicted by adiabatic theory. By analyzing… ▽ More The full three-dimensional photoelectron momentum distributions of argon are measured in intense near-circularly polarized laser fields. We observed that the transverse momentum distribution of ejected electrons by 410-nm near-circularly polarized field is unexpectedly narrowed with increasing laser intensity, which is contrary to the conventional rules predicted by adiabatic theory. By analyzing the momentum-resolved angular momentum distribution measured experimentally and the corresponding trajectories of ejected electrons semiclassically, the narrowing can be attributed to a temporary trapping and thereby focusing of a photoelectron by the atomic potential in a quasibound state. With the near-circularly polarized laser field, the strong Coulomb interaction with the rescattering electrons is avoided, thus the Coulomb focusing in the retrapped process is highlighted. We believe that these findings will facilitate understanding and steering electron dynamics in the Coulomb coupled system. △ Less

Submitted 21 November, 2019; originally announced November 2019.

All-optical frequency resolved optical gating for isolated attosecond pulse reconstruction

Authors: Zhen Yang, Wei Cao, Xi Chen, Jie Zhang, Yunlong Mo, Huiyao Xu, Kang Mi, Qingbin Zhang, Pengfei Lan, Peixiang Lu

Abstract: We demonstrate an all-optical approach for precise characterization of attosecond extreme ultraviolet pulses. Isolated attosecond pulse is produced from high order harmonics using intense driving pulse with proper gating technique. When a weak field is synchronized with the driver, it perturbs the harmonics generation process via altering the accumulated phase of the electron trajectories. The per… ▽ More We demonstrate an all-optical approach for precise characterization of attosecond extreme ultraviolet pulses. Isolated attosecond pulse is produced from high order harmonics using intense driving pulse with proper gating technique. When a weak field is synchronized with the driver, it perturbs the harmonics generation process via altering the accumulated phase of the electron trajectories. The perturbed harmonic spectrum can be formulated as a convolution of the unperturbed dipole and a phase gate, implying the validity of complete reconstruction of isolated attosecond pulses using conventional frequency resolved optical gating method. This in situ measurement avoids the central momentum approximation assumed in the widely used attosecond streaking measurement, providing a simple and reliable metrology for isolated attosecond pulse. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Comments: 5 pages, 4 figures

Journal ref: Optics Letters Vol. 45, Issue 2, pp. 567-570 (2020)

Wave-front controlled attosecond time domain interferometry

Authors: Zhen Yang, Wei Cao, Yunlong Mo, Huiyao Xu, Kang Mi, Pengfei Lan, Qingbin Zhang, Peixiang Lu

Abstract: Interferometry, as the key technique in modern precision measurements, has been used for length diagnosis in the fields of engineering metrology and astronomy. Analogous interferometric technique for time domain precision measurement is a significant complement to the spatial domain applications and requires the manipulation of the interference on the extreme time and energy scale. Here we present… ▽ More Interferometry, as the key technique in modern precision measurements, has been used for length diagnosis in the fields of engineering metrology and astronomy. Analogous interferometric technique for time domain precision measurement is a significant complement to the spatial domain applications and requires the manipulation of the interference on the extreme time and energy scale. Here we present an all-optical interferometry for high precision measurement with attosecond temporal and hundreds of meV energy resolution. The interferometer is based on laser driven high order harmonics which provide a robust sequence of attosecond temporal slits. As applications, we reconstruct the waveform of an arbitrarily polarized optical pulse using the time resolving capability, and capture the abnormal character of the transition dipole near a Cooper minimum in argon using the energy resolution provided. This novel attosecond interferometry opens the possibility for high precision measurement in time energy domain using an all-optical approach. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Comments: 12 pages, 5 figures in main text and 9 pages, 7 figures in supplementary material

Quantifying urban areas with multi-source data based on percolation theory

Authors: Wenpu Cao, Lei Dong, Lun Wu, Yu Liu

Abstract: Quantifying urban areas is crucial for addressing associated urban issues such as environmental and sustainable problems. Remote sensing data, especially the nighttime light images, have been widely used to delineate urbanized areas across the world. Meanwhile, some emerging urban data, such as volunteered geographical information (e.g., OpenStreetMap) and social sensing data (e.g., mobile phone a… ▽ More Quantifying urban areas is crucial for addressing associated urban issues such as environmental and sustainable problems. Remote sensing data, especially the nighttime light images, have been widely used to delineate urbanized areas across the world. Meanwhile, some emerging urban data, such as volunteered geographical information (e.g., OpenStreetMap) and social sensing data (e.g., mobile phone and social media), have also shown great potential in revealing urban boundaries and dynamics. However, consistent and robust methods to quantify urban areas from these multi-source data have remained elusive. Here, we propose a percolation-based method to extract urban areas from these multi-source urban data. We derive the optimal urban/non-urban threshold by considering the critical nature of urban systems with the support of the percolation theory. Furthermore, we apply the method with three open-source datasets - population, road, and nighttime light - to 28 countries. We show that the proposed method captures the similar urban characteristics in terms of urban areas from multi-source data, and Zipf's law holds well in most countries. The accuracy of the derived urban areas by different datasets has been validated with the Landsat-based reference data in 10 cities, and the accuracy can be further improved through data fusion ($κ=0.69-0.85$, mean $κ=0.78$). Our study not only provides an efficient method to quantify urban areas with open-source data, but also deepens the understanding of urban systems and sheds some light on multi-source data fusion in geographical fields. △ Less

Submitted 25 February, 2020; v1 submitted 28 October, 2019; originally announced October 2019.

Comments: Accepted for publication in Remote Sensing of Environment

Journal ref: Remote Sensing of Environment, (2020)

Determination of Electron Band Structure using Temporal Interferometry

Authors: Liang Li, Pengfei Lan, Lixin He, Wei Cao, Qingbin Zhang, Peixiang Lu

Abstract: We propose an all-optical method to directly reconstruct the band structure of semiconductors. Our scheme is based on the temporal Young's interferometer realized by high harmonic generation (HHG) with a few-cycle laser pulse. As a time-energy domain interferometric device, temporal interferometer encodes the band structure into the fringe in the energy domain. The relation between the band struct… ▽ More We propose an all-optical method to directly reconstruct the band structure of semiconductors. Our scheme is based on the temporal Young's interferometer realized by high harmonic generation (HHG) with a few-cycle laser pulse. As a time-energy domain interferometric device, temporal interferometer encodes the band structure into the fringe in the energy domain. The relation between the band structure and the emitted harmonic frequencies is established. This enables us to retrieve the band structure from the HHG spectrum with a single-shot measurement. Our scheme paves the way to study matters under ambient conditions and to track the ultrafast modification of band structures. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Lett. 124, 157403 (2020)

A Knotted Meta-molecule with 2-D Isotropic Optical Activity Rotating the Incident Polarization by 90°

Authors: Wending Mai, Lei Kang, Chunxu Mao, Ronald Jenkins, Danny Zhu, Pingjuan Werner, Douglas H. Werner, Jun Hu, Weiping Cao, Yifan Chen

Abstract: Optical activity is the ability of chiral materials to rotate linearly-polarized (LP) electromagnetic waves. Because of their intrinsic asymmetry, traditional chiral molecules usually lack isotropic performance, or at best only possess a weak form of chirality. Here we introduce a knotted chiral meta-molecule that exhibits optical activity corresponding to a 90° polarization rotation of the incide… ▽ More Optical activity is the ability of chiral materials to rotate linearly-polarized (LP) electromagnetic waves. Because of their intrinsic asymmetry, traditional chiral molecules usually lack isotropic performance, or at best only possess a weak form of chirality. Here we introduce a knotted chiral meta-molecule that exhibits optical activity corresponding to a 90° polarization rotation of the incident waves. More importantly, arising from the continuous multi-fold rotational symmetry of the chiral torus knot structure, the observed polarization rotation behavior is found to be independent of how the incident wave is polarized. In other words, the proposed chiral knot structure possesses two-dimensional (2-D) isotropic optical activity as illustrated in Fig. 1, which has been experimentally validated in the microwave spectrum. The proposed chiral torus knot represents the most optically active meta-molecule reported to date that is intrinsically isotropic to the incident polarization. △ Less

Submitted 8 August, 2019; originally announced August 2019.

Journal ref: Adv. Optical Mater. 2020, 8, 2000948

Temperature dependence of normalized sensitivity of Love wave sensor with unidirectional carbon fiber epoxy composite/Mn-doped 0.24PIN-0.46PMN-0.30PT ternary single crystal configuration

Authors: Ziqing Luo, Yujiao Ma, Xiaopeng Wang, Naixing Huang, Xudong Qi, Enwei Sun, Rui Zhang, Bin Yang, Tianquan Lü, Jian Liu, Wenwu Cao

Abstract: We have derived a general formula for sensitivity optimization of gravimetric sensors and use it to design a high precision and high sensitivity gravimetric sensor using unidirectional carbon fiber epoxy composite (CFEC) guiding layer on single crystal Mn-doped yPb(In1/2Nb1/2)O3-(1-x-y)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (Mn: PIN-PMN-PT) piezoelectric substrate. The normalized maximum sensitivity exhibits a… ▽ More We have derived a general formula for sensitivity optimization of gravimetric sensors and use it to design a high precision and high sensitivity gravimetric sensor using unidirectional carbon fiber epoxy composite (CFEC) guiding layer on single crystal Mn-doped yPb(In1/2Nb1/2)O3-(1-x-y)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (Mn: PIN-PMN-PT) piezoelectric substrate. The normalized maximum sensitivity exhibits a decreasing tendency with temperature up to 55 degrees Celsius. For the CFEC-on-Mn: PIN-PMN-PT sensor configuration with wavelength 24 {mu}m at 25 degrees Celsius, the maximum sensitivity can reach as high as 760.88 cm2/g, which is nearly twice that of traditional SiO2/ST quartz configuration gravimetric sensor. △ Less

Submitted 24 March, 2019; originally announced June 2019.

Photoelectron holographic interferometry to probe the longitudinal momentum offset at the tunnel exit

Authors: Min Li, Hui Xie, Wei Cao, Siqiang Luo, Jia Tan, Yudi Feng, Baojie Du, Weiyu Zhang, Yang Li, Qingbin Zhang, Pengfei Lan, Yueming Zhou, Peixiang Lu

Abstract: Laser-induced electron tunneling underlies numerous emerging spectroscopic techniques to probe attosecond electron dynamics in atoms and molecules. The improvement of those techniques requires an accurate knowledge of the exit momentum for the tunneling wave packet. Here we demonstrate a photoelectron interferometric scheme to probe the electron momentum longitudinal to the tunnel direction at the… ▽ More Laser-induced electron tunneling underlies numerous emerging spectroscopic techniques to probe attosecond electron dynamics in atoms and molecules. The improvement of those techniques requires an accurate knowledge of the exit momentum for the tunneling wave packet. Here we demonstrate a photoelectron interferometric scheme to probe the electron momentum longitudinal to the tunnel direction at the tunnel exit by measuring the photoelectron holographic pattern in an orthogonally polarized two-color laser pulse. In this scheme, we use a perturbative 400-nm laser field to modulate the photoelectron holographic fringes generated by a strong 800-nm pulse. The fringe shift offers a direct experimental access to the intermediate canonical momentum of the rescattering electron, allowing us to reconstruct the momentum offset at the tunnel exit with high accuracy. Our result unambiguously proves the existence of nonzero initial longitudinal momentum at the tunnel exit and provides fundamental insights into the non-quasi-static nature of the strong-field tunneling. △ Less

Submitted 21 April, 2019; originally announced April 2019.

Comments: 6 pages, 4 figures, accepted in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 122, 183202 (2019)

Bending sound around sharp corners without using topological edge states

Authors: Liting Wu, Mourad Oudich, Wenkang Cao, Haolin Jiang, Cheng Zhang, Junchen Ke, Jin Yang, Yuanchen Deng, Qiang Cheng, Tiejun Cui, Yun Jing

Abstract: Routing and guiding acoustic waves around sharp corners without backscattering losses is of great interest in the acoustics community. Sonic crystals have been primarily utilized to design backscattering-immune waveguides. While conventional approaches use defects to guide waves, a considerably more sophisticated and robust approach was recently developed based on topological edge states. In this… ▽ More Routing and guiding acoustic waves around sharp corners without backscattering losses is of great interest in the acoustics community. Sonic crystals have been primarily utilized to design backscattering-immune waveguides. While conventional approaches use defects to guide waves, a considerably more sophisticated and robust approach was recently developed based on topological edge states. In this paper, we propose a radically different theoretical framework based on extremely anisotropic metamaterials for engineering backscattering-immune waveguides. We theoretically derived the exact condition for one-way wave propagation in zigzag paths, and identified a number of key advantages of the current design over topologically protected waveguides. While the theoretical underpinning is universal and is applicable to acoustic and electromagnetic waves, the experimental validation was conducted using spoof surface acoustic waves. The proposed metamaterial could open up new possibilities for wave manipulation and lead to applications in on-chip devices and noise control. △ Less

Submitted 13 March, 2019; originally announced March 2019.

Molecular rotation movie filmed with high-harmonic generation

Authors: Yanqing He, Lixin He, Pengfei Lan, Baoning Wang, Liang Li, Xiaosong Zhu, Wei Cao, Peixiang Lu

Abstract: Direct imaging of molecular dynamics is a long-standing goal in physics and chemistry. As an emerging tool, high-harmonic spectroscopy (HHS) enables accessing molecular dynamics on femtosecond to attosecond time scales. However, decoding information from the harmonic signals is usually painstaking due to the coherent nature of high-harmonic generation (HHG). Here we show that this obstacle can be… ▽ More Direct imaging of molecular dynamics is a long-standing goal in physics and chemistry. As an emerging tool, high-harmonic spectroscopy (HHS) enables accessing molecular dynamics on femtosecond to attosecond time scales. However, decoding information from the harmonic signals is usually painstaking due to the coherent nature of high-harmonic generation (HHG). Here we show that this obstacle can be effectively overcome by exploiting machine learning in HHS. Combining the machine learning with an angle-resolved HHS method, we demonstrate that the rich dynamics of molecular rotational wave packet is fully reconstructed from the angular distributions of HHG measured at various time delays of the probe pulse. The experimental retrievals are in good agreement with the numerical simulations. These findings provide a comprehensive picture of molecular rotation in space and time which will facilitate the development of related researches on molecular dynamics imaging. △ Less

Submitted 14 February, 2019; originally announced February 2019.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. A 99, 053419 (2019)

Getting to the Bottom of Negative Capacitance FETs

Authors: Wei Cao, Kaustav Banerjee

Abstract: In this paper, we take a fresh look at the physics and operation of Negative Capacitance FETs, and provide unambiguous feedback to the device designers by examining NC-FETs' design space for sub-60 mV/dec Subthreshold Swing (SS). Straightforward design rule is derived, for the first time, based on the capacitor network in NC-FETs. Contrary to many ongoing efforts, it is found that: 1) state-of-the… ▽ More In this paper, we take a fresh look at the physics and operation of Negative Capacitance FETs, and provide unambiguous feedback to the device designers by examining NC-FETs' design space for sub-60 mV/dec Subthreshold Swing (SS). Straightforward design rule is derived, for the first time, based on the capacitor network in NC-FETs. Contrary to many ongoing efforts, it is found that: 1) state-of-the-art MOSFET platforms, such as SOI, FinFET, 2D-FET etc., are not suitable for constructing small-SS NC-FETs, unless internal metal gate is introduced; 2) quantum capacitance prevents NC-FETs from achieving hysteresis-free small-SS, and low densityof-states (DOS) material can alleviate this issue, to some extent; 3) NC non-linearity can be engineered to reach a tradeoff between sub-60 SS and hysteresis; 4) it is more encouraging and practical to use NC to recycle subthreshold voltage loss in short-channel MOSFETs, and overdrive voltage (essentially a type of loss). △ Less

Submitted 21 September, 2018; originally announced September 2018.

Frequently Occurring Reconnection Jets from Sunspot Light Bridges

Authors: Hui Tian, Vasyl Yurchyshyn, Hardi Peter, Sami K. Solanki, Peter R. Young, Lei Ni, Wenda Cao, Kaifan Ji, Yingjie Zhu, Jingwen Zhang, Tanmoy Samanta, Yongliang Song, Jiansen He, Linghua Wang, Yajie Chen

Abstract: Solid evidence of magnetic reconnection is rarely reported within sunspots, the darkest regions with the strongest magnetic fields and lowest temperatures in the solar atmosphere. Using the world's largest solar telescope, the 1.6-meter Goode Solar Telescope, we detect prevalent reconnection through frequently occurring fine-scale jets in the H$α$ line wings at light bridges, the bright lanes that… ▽ More Solid evidence of magnetic reconnection is rarely reported within sunspots, the darkest regions with the strongest magnetic fields and lowest temperatures in the solar atmosphere. Using the world's largest solar telescope, the 1.6-meter Goode Solar Telescope, we detect prevalent reconnection through frequently occurring fine-scale jets in the H$α$ line wings at light bridges, the bright lanes that may divide the dark sunspot core into multiple parts. Many jets have an inverted Y-shape, shown by models to be typical of reconnection in a unipolar field environment. Simultaneous spectral imaging data from the Interface Region Imaging Spectrograph show that the reconnection drives bidirectional flows up to 200~km~s$^{-1}$, and that the weakly ionized plasma is heated by at least an order of magnitude up to $\sim$80,000 K. Such highly dynamic reconnection jets and efficient heating should be properly accounted for in future modeling efforts of sunspots. Our observations also reveal that the surge-like activity previously reported above light bridges in some chromospheric passbands such as the H$α$ core has two components: the ever-present short surges likely to be related to the upward leakage of magnetoacoustic waves from the photosphere, and the occasionally occurring long and fast surges that are obviously caused by the intermittent reconnection jets. △ Less

Submitted 21 January, 2018; originally announced January 2018.

Comments: ApJ, 8 figures

Suspended silicon waveguides for long-wave infrared wavelengths

Authors: J. Soler Penadés, A. Sánchez-Postigo, M. Nedeljkovic, A. Ortega-Moñux, J. G. Wangüemert-Pérez, Y. Xu, R. Halir, Z. Qu, A. Z. Khokhar, A. Osman, W. Cao, C. G. Littlejohns, P. Cheben, I. Molina-Fernández, G. Z. Mashanovich

Abstract: In this paper we report suspended silicon waveguides operating at a wavelength of 7.67 mm with a propagation loss of 3.1 ? 0.3 dB/cm. To our knowledge this is the first demonstration of low loss silicon waveguides at such a long wavelength, with loss comparable to other platforms that use more exotic materials. The suspended Si waveguide core is supported by a subwavelength grating that provides l… ▽ More In this paper we report suspended silicon waveguides operating at a wavelength of 7.67 mm with a propagation loss of 3.1 ? 0.3 dB/cm. To our knowledge this is the first demonstration of low loss silicon waveguides at such a long wavelength, with loss comparable to other platforms that use more exotic materials. The suspended Si waveguide core is supported by a subwavelength grating that provides lateral optical confinement, while also allowing access to the buried oxide layer so that it can be wet etched using hydrofluoric acid. We also demonstrate low loss waveguide bends and s-bends. △ Less

Submitted 19 December, 2017; v1 submitted 9 November, 2017; originally announced November 2017.

Comments: 4 pages, 4 figures, accepted version

On-Line Cluster Reconstruction Of GEM Detector Based On FPGA Technology

Authors: Hui-Yin Wu, He-Run Yang, Wei Zhang, Jian-Jin Zhou, Sheng-Ying Zhao, Chen-Gui Lu, Jun-Wei Zhang, Bi-Tao Hu, Yi Zhang, Wen-Quan Cao

Abstract: In this work, a serial on-line cluster reconstruction technique based on FPGA technology was developed to compress experiment data and reduce the dead time of data transmission and storage. At the same time, X-ray imaging experiment based on a two-dimensional positive sensitive triple GEM detector with an effective readout area of 10 cm*10 cm was done to demonstrate this technique with FPGA develo… ▽ More In this work, a serial on-line cluster reconstruction technique based on FPGA technology was developed to compress experiment data and reduce the dead time of data transmission and storage. At the same time, X-ray imaging experiment based on a two-dimensional positive sensitive triple GEM detector with an effective readout area of 10 cm*10 cm was done to demonstrate this technique with FPGA development board. The result showed that the reconstruction technology was practicality and efficient. It provides a new idea for data compression of large spectrometers. △ Less

Submitted 24 March, 2017; originally announced March 2017.

Anti-Parity-Time Symmetric Optics via Flying Atoms

Authors: Peng Peng, Wanxia Cao, Ce Shen, Weizhi Qu, Jianming Wen, Liang Jiang, Yanhong Xiao

Abstract: The recently-developed notion of 'parity-time (PT) symmetry' in optical systems with a controlled gain-loss interplay has spawned an intriguing way of achieving optical behaviors that are presently unattainable with standard arrangements. In most experimental studies so far, however, the implementations rely highly on the advances of nanotechnologies and sophisticated fabrication techniques to syn… ▽ More The recently-developed notion of 'parity-time (PT) symmetry' in optical systems with a controlled gain-loss interplay has spawned an intriguing way of achieving optical behaviors that are presently unattainable with standard arrangements. In most experimental studies so far, however, the implementations rely highly on the advances of nanotechnologies and sophisticated fabrication techniques to synthesize solid-state materials. Here, we report the first experimental demonstration of optical anti-PT symmetry, a counterpart of conventional PT symmetry, in a warm atomic-vapor cell. By exploiting rapid coherence transport via flying atoms, our scheme illustrates essential features of anti-PT symmetry with an unprecedented precision on phase-transition threshold, and substantially reduces experimental complexity and cost. This result represents a significant advance in non-Hermitian optics by bridging a firm connection with the field of atomic, molecular and optical physics, where novel phenomena and applications in quantum and nonlinear optics aided by (anti-)PT symmetry could be anticipated. △ Less

Submitted 25 September, 2015; originally announced September 2015.