Showing 1–50 of 263 results for author: Cao, J

First-ever detection of microseismic activity with a tonne-scale cryogenic experiment

Authors: D. Q. Adams, C. Alduino, K. Alfonso, A. Armatol, F. T. Avignone, O. Azzolini, G. Bari, F. Bellini, G. Benato, M. Beretta, M. Biassoni, A. Branca, C. Brofferio, C. Bucci, J. Camilleri, A. Caminata, A. Campani, J. Cao, C. Capelli, S. Capelli, L. Cappelli, L. Cardani, P. Carniti, N. Casali, E. Celi , et al. (105 additional authors not shown)

Abstract: Vibrations from experimental setups and the environment are a persistent source of noise for low-temperature calorimeters searching for rare events, including neutrinoless double beta ($0νββ$) decay or dark matter interactions. Such noise can significantly limit experimental sensitivity to the physics case under investigation. Here we report the first detection of marine microseismic vibrations us… ▽ More Vibrations from experimental setups and the environment are a persistent source of noise for low-temperature calorimeters searching for rare events, including neutrinoless double beta ($0νββ$) decay or dark matter interactions. Such noise can significantly limit experimental sensitivity to the physics case under investigation. Here we report the first detection of marine microseismic vibrations using mK-scale calorimeters. This study employs a multi-device analysis correlating data from CUORE, the leading experiment in the search for $0νββ$ decay with mK-scale calorimeters and the Copernicus Earth Observation program, revealing the seasonal impact of Mediterranean Sea activity on CUORE's energy thresholds, resolution, and sensitivity over four years. The detection of marine microseisms underscores the need to address faint environmental noise in ultra-sensitive experiments. Understanding how such noise couples to the detector and developing mitigation strategies is essential for next-generation experiments. We demonstrate one such strategy: a noise decorrelation algorithm implemented in CUORE using auxiliary sensors, which reduces vibrational noise and improves detector performance. Enhancing sensitivity to $0νββ$ decay and to rare events with low-energy signatures requires identifying unresolved noise sources, advancing noise reduction methods, and improving vibration suppression systems, all of which inform the design of next-generation rare event experiments. △ Less

Submitted 13 May, 2025; originally announced May 2025.

Pre-study of a Li2MoO4 based bolometer for 100Mo neutrinoless double beta decay experiment in China

Authors: Deyong Duan, Mingxuan Xue, Kangkang Zhao, Taiyuan Liu, Haiping Peng, Jiaxuan Cao, Long Ma, Liang Chen, Hui Yuan, Qing Lin, Zizong Xua, Xiaolian Wang

Abstract: The cryogenic phonon scintillating bolometer is a promising and extremely attractive option to search for the nuclide neutrinoless double beta decay. In this paper, a pre-study of bolometer based on Li2MoO4 (LMO) crystal is presented, in which the properties of the LMO crystal at the low temperature, including scintillation characteristics and specific heat, are investigated in detail. The excitat… ▽ More The cryogenic phonon scintillating bolometer is a promising and extremely attractive option to search for the nuclide neutrinoless double beta decay. In this paper, a pre-study of bolometer based on Li2MoO4 (LMO) crystal is presented, in which the properties of the LMO crystal at the low temperature, including scintillation characteristics and specific heat, are investigated in detail. The excitation spectrum and light yield are measured from the room temperature down to 10 K, and heat capacity is measured down to temperature of O(200) mK. Furthermore, a (2 cm)3 cubic LMO based bolometer is manufactured and tested at ultra-low mK-level temperature in a ground-above cryostat platform, and a good energy resolution is achieved. The studies laid a foundation to manufacture the bolometer detector in China and conduct neutrinoless double beta decay research at the China Jinping Underground Laborator △ Less

Submitted 3 May, 2025; originally announced May 2025.

Development of 6-inch 80-170 GHz broadband silicon plated horn antenna arrays for primordial gravitational wave search

Authors: Yuanhang He, Shibo Shu, Yaqiong Li, Xuefeng Lu, Ye Chai, Xiang Li, Zhi Chang, He Gao, Yudong Gu, Xufang Li, Zhengwei Li, Zhouhui Liu, Guofeng Wang, Zhongxue Xin, Daikang Yan, Aimei Zhang, Yifei Zhang, Yongjie Zhang, Wenhua Shi, Juexian Cao, Congzhan Liu

Abstract: Searching for primordial gravitational wave in cosmic microwave background (CMB) polarization signal is one of the key topics in modern cosmology. Cutting-edge CMB telescopes requires thousands of pixels to maximize mapping speed. Using modular design, the telescope focal plane is simplified as several detector modules. Each module has hundreds of pixels including antenna arrays, detector arrays,… ▽ More Searching for primordial gravitational wave in cosmic microwave background (CMB) polarization signal is one of the key topics in modern cosmology. Cutting-edge CMB telescopes requires thousands of pixels to maximize mapping speed. Using modular design, the telescope focal plane is simplified as several detector modules. Each module has hundreds of pixels including antenna arrays, detector arrays, and readout arrays. The antenna arrays, as the beam defining component, determine the overall optical response of the detector module. In this article, we present the developments of 6-inch broadband antenna arrays from 80GHz to 170GHz for the future IHEP focal plane module. The arrays are fabricated from 42 6-inch silicon wafers including 456 antennas, 7% more pixels than usual design. The overall in-band cross polarization is smaller than -20 dB and the in-band beam asymmetry is smaller than 10%, fulfilling the requirements for primordial gravitational wave search. △ Less

Submitted 20 April, 2025; originally announced April 2025.

Comments: 13 pages, 14 figures, to be published in Research in Astronomy and Astrophysics

SI-Traceable Temperature Calibration Based on Optical Lattice Clocks

Authors: Jin Cao, Xiaotong Lu, Benquan Lu, Hong Chang

Abstract: We present a SI-traceable temperature calibration apparatus utilizing optical lattice clocks for precision metrology. The system employs a dual-blackbody radiation shield chamber with independent temperature control, enabling synchronous differential measurements of blackbody radiation (BBR)-induced frequency shifts in atomic ensembles. By correlating these shifts with chamber temperature, we achi… ▽ More We present a SI-traceable temperature calibration apparatus utilizing optical lattice clocks for precision metrology. The system employs a dual-blackbody radiation shield chamber with independent temperature control, enabling synchronous differential measurements of blackbody radiation (BBR)-induced frequency shifts in atomic ensembles. By correlating these shifts with chamber temperature, we achieve absolute temperature determination traceable to the SI second through the optical clock frequency. Comprehensive uncertainty analysis demonstrates an absolute temperature uncertainty below 15 mK across the $200 \sim 350$ K range based on $^{87}$Sr optical lattice clock, representing an improvement of two orders of magnitude over current temperature measurements based on BBR-induced Rydberg state transitions. This advancement in primary thermometry offers significant improvements in precision, reproducibility, and versatility, with potential applications in metrology, fundamental physics, and industrial processes. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Innovating Bolometers' Mounting: A Gravity-Based Approach

Authors: The CUPID Collaboration, K. Alfonso, A. Armatol, C. Augier, F. T. Avignone III, O. Azzolini, A. S. Barabash, G. Bari, A. Barresi, D. Baudin, F. Bellini, G. Benato, L. Benussi, V. Berest, M. Beretta, M. Bettelli, M. Biassoni, J. Billard, F. Boffelli, V. Boldrini, E. D. Brandani, C. Brofferio, C. Bucci, M. Buchynska, J. Camilleri , et al. (168 additional authors not shown)

Abstract: Cryogenic calorimeters, also known as bolometers, are among the leading technologies for searching for rare events. The CUPID experiment is exploiting this technology to deploy a tonne-scale detector to search for neutrinoless double-beta decay of $^{100}$Mo. The CUPID collaboration proposed an innovative approach to assembling bolometers in a stacked configuration, held in position solely by grav… ▽ More Cryogenic calorimeters, also known as bolometers, are among the leading technologies for searching for rare events. The CUPID experiment is exploiting this technology to deploy a tonne-scale detector to search for neutrinoless double-beta decay of $^{100}$Mo. The CUPID collaboration proposed an innovative approach to assembling bolometers in a stacked configuration, held in position solely by gravity. This gravity-based assembly method is unprecedented in the field of bolometers and offers several advantages, including relaxed mechanical tolerances and simplified construction. To assess and optimize its performance, we constructed a medium-scale prototype hosting 28 Li$_2$MoO$_4$ crystals and 30 Ge light detectors, both operated as cryogenic calorimeters at the Laboratori Nazionali del Gran Sasso (Italy). Despite an unexpected excess of noise in the light detectors, the results of this test proved (i) a thermal stability better than $\pm$0.5 mK at 10 mK, (ii) a good energy resolution of Li$_2$MoO$_4$ bolometers, (6.6 $\pm$ 2.2) keV FWHM at 2615 keV, and (iii) a Li$_2$MoO$_4$ light yield measured by the closest light detector of 0.36 keV/MeV, sufficient to guarantee the particle identification requested by CUPID. △ Less

Submitted 6 March, 2025; originally announced March 2025.

CUPID, the CUORE Upgrade with Particle Identification

Authors: The CUPID Collaboration, K. Alfonso, A. Armatol, C. Augier, F. T. Avignone III, O. Azzolini, A. S. Barabash, G. Bari, A. Barresi, D. Baudin, F. Bellini, G. Benato, L. Benussi, V. Berest, M. Beretta, M. Bettelli, M. Biassoni, J. Billard, F. Boffelli, V. Boldrini, E. D. Brandani, C. Brofferio, C. Bucci, M. Buchynska, J. Camilleri , et al. (166 additional authors not shown)

Abstract: CUPID, the CUORE Upgrade with Particle Identification, is a next-generation experiment to search for neutrinoless double beta decay ($0νββ$) and other rare events using enriched Li$_2$$^{100}$MoO$_4$ scintillating bolometers. It will be hosted by the CUORE cryostat located at the Laboratori Nazionali del Gran Sasso in Italy. The main physics goal of CUPID is to search for $0νββ$\ of $^{100}$Mo wit… ▽ More CUPID, the CUORE Upgrade with Particle Identification, is a next-generation experiment to search for neutrinoless double beta decay ($0νββ$) and other rare events using enriched Li$_2$$^{100}$MoO$_4$ scintillating bolometers. It will be hosted by the CUORE cryostat located at the Laboratori Nazionali del Gran Sasso in Italy. The main physics goal of CUPID is to search for $0νββ$\ of $^{100}$Mo with a discovery sensitivity covering the full neutrino mass regime in the inverted ordering scenario, as well as the portion of the normal ordering regime with lightest neutrino mass larger than 10 meV. With a conservative background index of 10$^{-4}$ cnts/(keV$\cdot$kg$\cdot$yr), 240 kg isotope mass, 5 keV FWHM energy resolution and 10 live-years of data taking, CUPID will have a 90\% C.L. half-life exclusion sensitivity of 1.8 $\cdot$ 10$^{27}$ yr, corresponding to an effective Majorana neutrino mass ($m_{ββ}$) sensitivity of 9--15 meV, and a $3σ$ discovery sensitivity of 1 $\cdot$ 10$^{27}$ yr, corresponding to an $m_{ββ}$ range of 12--21 meV. △ Less

Submitted 1 March, 2025; originally announced March 2025.

Comments: Prepared for submission to EPJC; 24 pages, 6 figures, and 2 tables

Simulation of the Background from $^{13}$C$(α, n)^{16}$O Reaction in the JUNO Scintillator

Authors: JUNO Collaboration, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Costas Andreopoulos, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Beretta, Antonio Bergnoli, Nikita Bessonov, Daniel Bick, Lukas Bieger, Svetlana Biktemerova , et al. (608 additional authors not shown)

Abstract: Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$)… ▽ More Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$) reactions. In organic liquid scintillator detectors, $α$ particles emitted from intrinsic contaminants such as $^{238}$U, $^{232}$Th, and $^{210}$Pb/$^{210}$Po, can be captured on $^{13}$C nuclei, followed by the emission of a MeV-scale neutron. Three distinct interaction mechanisms can produce prompt energy depositions preceding the delayed neutron capture, leading to a pair of events correlated in space and time within the detector. Thus, ($α, n$) reactions represent an indistinguishable background in liquid scintillator-based antineutrino detectors, where their expected rate and energy spectrum are typically evaluated via Monte Carlo simulations. This work presents results from the open-source SaG4n software, used to calculate the expected energy depositions from the neutron and any associated de-excitation products. Also simulated is a detailed detector response to these interactions, using a dedicated Geant4-based simulation software from the JUNO experiment. An expected measurable $^{13}$C$(α, n)^{16}$O event rate and reconstructed prompt energy spectrum with associated uncertainties, are presented in the context of JUNO, however, the methods and results are applicable and relevant to other organic liquid scintillator neutrino detectors. △ Less

Submitted 2 May, 2025; v1 submitted 2 March, 2025; originally announced March 2025.

Comments: 25 pages, 14 figures, 4 tables

On the First-Passage Time Fluctuation Theorem in Complex Biomolecular Networks

Authors: D. Evan Piephoff, Jianshu Cao

Abstract: A fluctuation theorem is examined for the first-passage time of a biomolecular machine in a nonequilibrium steady-state. For such machines in which the driven, observable process is coupled to a hidden process in a kinetically cooperative fashion, the entropy produced along first-passage trajectories is no longer uniform, resulting in a breakdown of this relation. Here, we consider the canonical m… ▽ More A fluctuation theorem is examined for the first-passage time of a biomolecular machine in a nonequilibrium steady-state. For such machines in which the driven, observable process is coupled to a hidden process in a kinetically cooperative fashion, the entropy produced along first-passage trajectories is no longer uniform, resulting in a breakdown of this relation. Here, we consider the canonical model for this type of system, a kinetic scheme for conformation-modulated single-enzyme catalysis, as we (i) determine the circumstances under which this fluctuation theorem can be restored; (ii) assess what its violation reveals about the hidden dynamics; and (iii) characterize the general form of the deviation from this relation. Kinetic evaluations are performed using a novel, efficient pathway analysis technique, allowing us to attain some surprising and fairly straightforward results from relatively complex calculations. We find that in the absence of hidden current, a fluctuation theorem can be written for the first-passage time of the observable process, and we demonstrate that this is a general feature applicable to a wide variety of complex networks. The validity of this relation can be experimentally tested, with its violation serving as a signature of hidden detailed balance breaking. In addition, we obtain a remarkably compact exact expression for the integrated correction to this first-passage time fluctuation theorem, which indicates that the kinetic branching ratio, defined as the ratio of the forward observable process probability to the backward one, is bounded by the entropy production associated with the first-passage work (i.e., the work applied along a first-passage trajectory). These results provide detailed insight into the rich connections between dynamic measurements and the underlying nonequilibrium thermodynamics in complex biomolecular networks. △ Less

Submitted 15 January, 2025; originally announced January 2025.

Effective Medium Theory for Time-modulated Subwavelength Resonators

Authors: Habib Ammari, Jinghao Cao, Erik Orvehed Hiltunen, Liora Rueff

Abstract: This paper provides a general framework for deriving effective material properties of one-dimensional time-modulated systems of subwavelength resonators. It applies to subwavelength resonator systems with a general form of time-dependent parameters. We show that the resonators can be accurately described by a point-scattering formulation when the width of the resonators is small. In contrast to th… ▽ More This paper provides a general framework for deriving effective material properties of one-dimensional time-modulated systems of subwavelength resonators. It applies to subwavelength resonator systems with a general form of time-dependent parameters. We show that the resonators can be accurately described by a point-scattering formulation when the width of the resonators is small. In contrast to the static setting, where this point interaction approximation yields a Lippmann-Schwinger equation for the effective material properties, the mode coupling in the time-modulated case instead yields an infinite linear system of Lippmann-Schwinger-type equations. The effective equations can equivalently be written as a system of differential equations. Moreover, we introduce a numerical scheme to approximately solve the system of coupled equations and illustrate the validity of the effective equation. △ Less

Submitted 28 March, 2025; v1 submitted 18 December, 2024; originally announced December 2024.

Comments: 18 pages, 4 figures

MSC Class: 35J05; 35C20; 35P20; 74J20

Unified gas-kinetic scheme for reactive flow with multi-scale transport and chemical non-equilibrium

Authors: Yufeng Wei, Junzhe Cao, Kun Xu

Abstract: Reactive flows for rarefied gas mixtures involve a multi-scale transport characterized by particle collisions and free streaming, and non-equilibrium physics containing multi-species interactions, and chemical non-equilibrium. These flows are pivotal in aerospace engineering and semiconductor manufacturing, impacting spacecraft control and thermal protection in near-space flight, and plasma etchin… ▽ More Reactive flows for rarefied gas mixtures involve a multi-scale transport characterized by particle collisions and free streaming, and non-equilibrium physics containing multi-species interactions, and chemical non-equilibrium. These flows are pivotal in aerospace engineering and semiconductor manufacturing, impacting spacecraft control and thermal protection in near-space flight, and plasma etching for chip processing. Therefore, the simulation of these multi-scale and non-equilibrium flow is of scientific and industrial significance. Following the methodology of direct modeling, the unified gas-kinetic scheme (UGKS) is constructed to describe the multi-scale transport of gas molecules across all flow regimes. This study extends the UGKS to the reactive flows with chemical non-equilibrium for the capture of more complex flow physics. Test cases, including shock structures, hypersonic flows around a two-dimensional cylinder and the three-dimensional re-entry and space vehicle, and nozzle plume flow into a vacuum, are used to validate the UGKS through the comparison with the direct simulation Monte Carlo method. The study shows that the methodology of direct modeling and the extended UGKS have great potential for simulating multi-scale flows with complex non-equilibrium physics. △ Less

Submitted 12 December, 2024; originally announced December 2024.

Multifunctional Portable Optical Measuring Instrument Based on Y-Fiber Optics

Authors: Juntao He, Yikai Dang, Haoqi Wang, Shaohua Wang, Yingke Li, Ruiyun Ma, Yingyuan Li, Peilin Gao, Jianguo Cao, Yong Pan

Abstract: Based on grating diffraction principle, optical fiber transmission principle and optical interference principle, a multi-functional portable optical measuring instrument is constructed in this paper. The optical measurement visualization spectrometer based on CCD photoelectric image sensor is designed and assembled. The "Y" optical signal transmission fiber optical path suitable for multi-function… ▽ More Based on grating diffraction principle, optical fiber transmission principle and optical interference principle, a multi-functional portable optical measuring instrument is constructed in this paper. The optical measurement visualization spectrometer based on CCD photoelectric image sensor is designed and assembled. The "Y" optical signal transmission fiber optical path suitable for multi-function measurement is improved and designed. The multi-function optical measurement system is built by combining with remote controlled multi-color LED lights. The spectral analysis, solution concentration monitoring and film thickness measurement are realized. The experimental results show that the observable wavelength range of the spectrometer is about 340-1050nm and the resolution is 1nm. The solution concentration can be obtained by measuring absorbance with optical fiber spectrometer. The film thickness measuring instrument can accurately measure the thickness of the micron film, and the measurement accuracy can reach 1.25 μm. It is proved that the instrument integrates multiple functions, has high measurement accuracy and wide range, and realizes non-contact measurement. △ Less

Submitted 10 December, 2024; originally announced December 2024.

Film Thickness Gauge Based on Interferometric Principle of Y-shaped Optical Fiber

Authors: Juntao He, Yikai Dang, Haoqi Wang, Shaohua Wang, Yingke Li, Ruiyun Ma, Yingyuan Li, Peilin Gao, Jianguo Cao, Yong Pan

Abstract: In this paper, a thin film thickness gauge based on the interferometric principle of Y-shaped optical fiber is proposed to achieve accurate measurement of film thickness. In this paper, the optical fiber, the interferometric principle and the film thickness calculation principle are introduced, and the interferometric thickness measurement system based on Y-shaped optical fiber is constructed. The… ▽ More In this paper, a thin film thickness gauge based on the interferometric principle of Y-shaped optical fiber is proposed to achieve accurate measurement of film thickness. In this paper, the optical fiber, the interferometric principle and the film thickness calculation principle are introduced, and the interferometric thickness measurement system based on Y-shaped optical fiber is constructed. The system uses the special structure of Y-shaped optical fiber to transmit the optical signal generated by the light source to the surface of the thin film, and obtains coherent optical signals of different wavelengths through reflection and interference. The spectrometer is used to receive and interpret these interference signals, and the thickness of the film is calculated according to the wavelength difference of the peak positions of the adjacent stages, combined with the refractive index of the film. In the specific design, the paper elaborates on the design of each part of the instrument, including the selection and parameter setting of the light source, Y-fiber and spectrometer. Among them, the Y-shaped optical fiber, as the core component of the instrument, has the function of transmitting optical signals and detecting optical signals on the surface of thin films. At the same time, the paper also introduces the housing packaging and internal assembly process of the instrument to ensure the portability and stability of the instrument. The results show that the thickness gauge has high measurement accuracy and stability, which can meet the needs of practical applications. △ Less

Submitted 10 December, 2024; originally announced December 2024.

Magnetic polaronic exciton in A-type 2D van der Waals bulk material CrSBr

Authors: Xiaodong Shen, Jiajun Cao, Weizheng Liang, Borong Cong, Bao Ke, Jialong Zhao, Bingsuo Zou

Abstract: 2D magnetic semiconductor CrSBr exhibits unique magneto-optical properties, yet its electronic structure and photophysical mechanisms remain unclear at high magnetic field and low temperature. Through comprehensive spectroscopic investigations, its charge-transfer band edge is identified at 500 nm. Below this band-edge, local excitonic magnetic polaronic states from Cr3+ ions out of FM aggregates… ▽ More 2D magnetic semiconductor CrSBr exhibits unique magneto-optical properties, yet its electronic structure and photophysical mechanisms remain unclear at high magnetic field and low temperature. Through comprehensive spectroscopic investigations, its charge-transfer band edge is identified at 500 nm. Below this band-edge, local excitonic magnetic polaronic states from Cr3+ ions out of FM aggregates in layer and bilayer could be seen due to phonon-spin-exciton coupling, in which magnetic polaronic PL1 emission occurs at 720 nm from single Cr3+ d-d transition, a dark-state pair exciton occurs at 850 nm in 10 K magnetic field, and double-peak PL2 emission at 920 nm out of Cr3+ FM trimer in monolayer is seen; besides, the magnetic bi-polaronic PL3 at 990 nm can be assigned to Cr3+ tetramers between FM adjacent layers. In magnetic field perpendicular to the layer, direct competition between PL1and dark-state excitons and PL2 and PL3 excitonic states persist in different temperatures. This study sheds light on the complicated magneto-exciton interactions in the multi-body effect of CrSBr, beneficial for quantum modulation in layered magnetic semiconductors. △ Less

Submitted 26 November, 2024; originally announced November 2024.

Characterization of Polariton Dynamics in a Multimode Cavity: Noise-enhanced Ballistic Expansion

Authors: Ilia Tutunnikov, Md Qutubuddin, H. R. Sadeghpour, Jianshu Cao

Abstract: Advances in optical measurements enable precise tracking of cavity polariton dynamics with exceptional spatiotemporal resolution. Building on these developments, we present a comprehensive theoretical analysis of wave packet dynamics in a noisy emitter lattice embedded in a multi-mode microcavity. We uncover a series of dynamic phenomena in both the noise-free and noisy cases: (i) In the noise-fre… ▽ More Advances in optical measurements enable precise tracking of cavity polariton dynamics with exceptional spatiotemporal resolution. Building on these developments, we present a comprehensive theoretical analysis of wave packet dynamics in a noisy emitter lattice embedded in a multi-mode microcavity. We uncover a series of dynamic phenomena in both the noise-free and noisy cases: (i) In the noise-free case, the emitters' probability density splits into two Gaussians whose group velocities are defined by the lower and upper polariton branches. (ii) Noise induces dephasing and leads to multiple dynamical stages with different time scales spanning several orders of magnitude. These stages include, in order of increasing duration: underdamped Rabi oscillations; damping of the center of mass velocity of the emitters' probability density; population thermalization; and the transition from the ballistic to the diffusive regimes of the probability density spreading. (iii) Most strikingly, dephasing enhances the ballistic spreading, which persists for several orders of magnitude longer than it does without a cavity. Some of our predictions align with recent experimental observations, while others can be tested in existing platforms. Understanding wave packet dynamics across multiple time scales in the presence of noise is crucial for optimizing polaritonic devices. This study paves the way for future experiments focused on light-matter interactions in complex systems. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Comments: 16 pages, 16 figures

Detecting collagen by machine learning improved photoacoustic spectral analysis for breast cancer diagnostics: feasibility studies with murine models

Authors: Jiayan Li, Lu Bai, Yingna Chen, Junmei Cao, Jingtao Zhu, Wanxiang Zhi, Qian Cheng

Abstract: Collagen, a key structural component of the extracellular matrix, undergoes significant remodeling during carcinogenesis. However, the important role of collagen levels in breast cancer diagnostics still lacks effective in vivo detection techniques to provide a deeper understanding. This study presents photoacoustic spectral analysis improved by machine learning as a promising non-invasive diagnos… ▽ More Collagen, a key structural component of the extracellular matrix, undergoes significant remodeling during carcinogenesis. However, the important role of collagen levels in breast cancer diagnostics still lacks effective in vivo detection techniques to provide a deeper understanding. This study presents photoacoustic spectral analysis improved by machine learning as a promising non-invasive diagnostic method, focusing on exploring collagen as a salient biomarker. Murine model experiments revealed more profound associations of collagen with other cancer components than in normal tissues. Moreover, an optimal set of feature wavelengths was identified by a genetic algorithm for enhanced diagnostic performance, among which 75% were from collagen-dominated absorption wavebands. Using optimal spectra, the diagnostic algorithm achieved 72% accuracy, 66% sensitivity, and 78% specificity, surpassing full-range spectra by 6%, 4%, and 8%, respectively. The proposed photoacoustic methods examine the feasibility of offering valuable biochemical insights into existing techniques, showing great potential for early-stage cancer detection. △ Less

Submitted 10 October, 2024; originally announced October 2024.

Photoacoustic tracking of photo-magnetically powered nanoparticles for cancer therapy

Authors: Jiayan Li, Chang Xu, Yingna Chen, Junmei Cao, Wanli Ye, Yu Cheng, Qian Cheng

Abstract: The in vivo propulsion and monitoring of nanoparticles (NPs) have received tremendous achievements in the past decade. Developing functional NPs that can be efficiently manipulated inside the human body with a non-invasive tracking modality is critical to clinical translation. This study synthesized a photo-magnetically powered nanoparticle (PMN) with a Fe3O4 core and gold spiky surface. The Au-na… ▽ More The in vivo propulsion and monitoring of nanoparticles (NPs) have received tremendous achievements in the past decade. Developing functional NPs that can be efficiently manipulated inside the human body with a non-invasive tracking modality is critical to clinical translation. This study synthesized a photo-magnetically powered nanoparticle (PMN) with a Fe3O4 core and gold spiky surface. The Au-nanotips ensure PMNs have a strong light absorption in the second near-infrared (NIR) window and produce outstanding photoacoustic signals. The Bio-transmission electron microscopy and simulation results prove that the assembly of PMNs under a magnetic field further enhances the photothermal conversion in cells, contributing to the reduction of ambient viscosity. Photoacoustic imaging (PAI) realized real-time monitoring of PMN movements and revealed that laser plus magnetic coupling couldimprove intratumoral distribution and retention. The proposed methods exhibit excellent potential for the clinical research of cancer nanotherapies. △ Less

Submitted 4 October, 2024; originally announced October 2024.

Longitudinal photoacoustic monitoring of collagen evolution modulated by cancer-associated fibroblasts: simulation and experiment studies

Authors: Jiayan Li, Lu Bai, Junmei Cao, Wenxiang Zhi, Qian Cheng

Abstract: Noninvasive in vivo detection of collagen facilitates the investigation of mechanisms by which cancer-associated fibroblast (CAF) regulates the extracellular matrix. This study explored the feasibility of photoacoustic spectrum analysis (PASA) in identifying longitudinal changes of collagen modulated by CAFs using simulations and experiment studies. Optical and acoustic simulations in tissues were… ▽ More Noninvasive in vivo detection of collagen facilitates the investigation of mechanisms by which cancer-associated fibroblast (CAF) regulates the extracellular matrix. This study explored the feasibility of photoacoustic spectrum analysis (PASA) in identifying longitudinal changes of collagen modulated by CAFs using simulations and experiment studies. Optical and acoustic simulations in tissues were performed based on the histological slides of maximum cross-sections of murine malignancies to verify the effectiveness of photoacoustic (PA) detection system and the parameter "relative area of power spectrum density (APSD)". Experiments were conducted on three groups of mouse models with incremental ratios of CAFs and breast cancer cells at 3 continuous time points. Results discovered that the system configuration and APSD were capable of reflecting the evolution of collagen during cancer growth. Furthermore, cancers receiving a high dose of CAFs exhibited a suppressed collagen level. The presented methods show great potential for clinical translation of PASA in the field of cancer therapies targeting CAFs. △ Less

Submitted 4 October, 2024; originally announced October 2024.

Comments: 4 pages, 5 figures,conference

Simplified unified wave-particle method for diatomic gases based on Rykov model

Authors: Sirui Yang, Sha Liu, Junzhe Cao, Chengwen Zhong

Abstract: During the past decades, the numerical methods based on Navier-Stokes (N-S) equations and direct simulation Monte Carlo (DSMC) methods have been proved effective in simulating flows in the continuum and rarefied regimes, respectively. However, as single-scale methods, they face challenges in addressing common multi-scale problems, which are essential to simulate hypersonic flows around near-space… ▽ More During the past decades, the numerical methods based on Navier-Stokes (N-S) equations and direct simulation Monte Carlo (DSMC) methods have been proved effective in simulating flows in the continuum and rarefied regimes, respectively. However, as single-scale methods, they face challenges in addressing common multi-scale problems, which are essential to simulate hypersonic flows around near-space vehicles and the flows in the micro-electro-mechanical systems. Hence, there is an urgent need for a method to predict multi-scale flows. In this work, a quantified model-competition (QMC) mechanism for diatomic multi-scale flows is derived from the integral solution of the Rykov model equations. This mechanism encapsulates both continuum and rarefied behaviors in a cell, weighted according to its local physical scale. By building upon the QMC mechanism, the N-S solver and DSMC solver are directly integrated within a cell to devise a simplified unified wave-particle (SUWP) method for diatomic gases. Specifically, the two-temperature equations considering the rotational energy are introduced into the kinetic inviscid flux (KIF) scheme and the N-S solver. As to the particle part, the collisionless DSMC solver is utilized to describe the non-equilibrium phenomenon. The proposed SUWP method for diatomic gases undergoes validation across a series of cases, including zero-dimensional homogeneous gas relaxation, one-dimensional normal shock structure, two-dimensional flow around the flat and the cylinder, and three-dimensional flows past the sphere and the blunt cone. Additionally, the implementation details of multi-scale wave-particle methods analysis and discussion are also undertaken in this work. △ Less

Submitted 21 September, 2024; originally announced September 2024.

Ultrafast measurement of field-particle energy transfer during chorus emissions in space

Authors: C. M. Liu, B. N. Zhao, J. B. Cao, C. J. Pollock, C. T. Russell, Y. Y. Liu, X. N. Xing, P. A. Linqvist, J. L. Burch

Abstract: Chorus is one of the strongest electromagnetic emissions naturally occurring in space, and can cause hazardous radiations to humans and satellites1-3. Although chorus has attracted extreme interest and been intensively studied for decades4-7, its generation and evolution remain highly debated, due to the complexity of the underlying physics and the limited capacity of previous spacecraft missions7… ▽ More Chorus is one of the strongest electromagnetic emissions naturally occurring in space, and can cause hazardous radiations to humans and satellites1-3. Although chorus has attracted extreme interest and been intensively studied for decades4-7, its generation and evolution remain highly debated, due to the complexity of the underlying physics and the limited capacity of previous spacecraft missions7. Chorus has also been believed to be governed by planetary magnetic dipolar fields5,7. Contrary to such conventional expectation, here we report unexpected observations of chorus in the terrestrial neutral sheet where magnetic dipolar effect is absent. Using unprecedentedly high-cadence data from the Magnetospheric Multiscale Mission, we present the first, ultrafast measurements of the wave dispersion relation and electron three-dimensional distributions within the waves, showing smoking-gun evidences for chorus-electron interactions and development of electron holes in the wave phase space. We estimate field-particle energy transfer inside the waves and find that the waves were extracting energy from local thermal electrons, in line with the wave positive growth rate derived from instability analysis. Our observations, opening new pathways for resolving long-standing controversies regarding the chorus emissions, are crucial for understanding nonlinear energy transport ubiquitously observed in space and astrophysical environments. △ Less

Submitted 23 August, 2024; originally announced August 2024.

Comments: under review; comments and suggestions are welcomed

Analysis of the Effect of Tilted Corner Cube Reflector Arrays on Lunar Laser Ranging

Authors: Jin Cao, Rufeng Tang, Kai Huang, Zhulian Li, Yongzhang Yang, Kai Huang, Jintao Li, Yuqiang Li

Abstract: This paper primarily investigates the effect of the tilt of corner cube reflector (CCR) arrays on lunar laser ranging (LLR). A mathematical model was established to study the random errors caused by the tilt of the CCR arrays. The study found that, ideally, when the laser ranging pulse width is 10 picoseconds or less, it is possible to distinguish from which specific corner cubes within the CCR ar… ▽ More This paper primarily investigates the effect of the tilt of corner cube reflector (CCR) arrays on lunar laser ranging (LLR). A mathematical model was established to study the random errors caused by the tilt of the CCR arrays. The study found that, ideally, when the laser ranging pulse width is 10 picoseconds or less, it is possible to distinguish from which specific corner cubes within the CCR array each peak in the echo signal originates. Consequently, partial data from the echo can be extracted for signal processing, significantly reducing random errors and improving the single-shot precision of LLR. The distance obtained by extracting part of the echo can be reduced to the center position of the array, thereby providing multiple higher-precision ranging results from each measurement. This not only improves the precision of LLR but also increases the data volume. A simulation experiment based on the 1.2 m laser ranging system at Yunnan Observatories was conducted. By extracting one peak for signal processing, the single-shot precision improved from 32.24 mm to 2.52 mm, validating the theoretical analysis results. Finally, an experimental laser ranging system based on a 53 cm binocular telescope system was established for ground experiments. The experimental results indicated that the echo signal could identify the tilt state of the CCR array. By extracting the peak returned by the central CCR for signal processing, the ranging precision was greatly improved. Through theoretical analyses, simulation experiments, and ground experiments, a solution to reduce the random errors caused by the tilt of the CCR array was provided. This offers an approach to enhance the single-shot precision of future LLR and provides a reference for upgrading ground-based equipment at future laser ranging stations. △ Less

Submitted 21 August, 2024; v1 submitted 17 August, 2024; originally announced August 2024.

Journal ref: Remote Sens. 2024, 16(16), 3030

Composite solitary vortices of three-wave mixing in quasi-phase-matched photonic crystals

Authors: Chao Kong, Jinqing Li, Xinyi Tang, Xuli Li, Ju Jiao, Jun Cao, Haiming Deng

Abstract: We report the composite vortex solitons of three-wave mixing propagate stably in a three-dimensional (3D) quasi-phase-matched photonic crystals (QPM-PhC). The modulation of QPM-PhC is designed as a checkerboard pattern. The vortex solitons, composed by three waves ($ω_{1,2,3}$) propagating through the lattices, exhibit a four-spotted discrete type, which gives rise to four distinct modes: zero-vor… ▽ More We report the composite vortex solitons of three-wave mixing propagate stably in a three-dimensional (3D) quasi-phase-matched photonic crystals (QPM-PhC). The modulation of QPM-PhC is designed as a checkerboard pattern. The vortex solitons, composed by three waves ($ω_{1,2,3}$) propagating through the lattices, exhibit a four-spotted discrete type, which gives rise to four distinct modes: zero-vorticity, vortex, anti-vortex, and quadrupole. The composite vortex solitons result from combinations of these modes and lead to four cases: vortex doubling, hidden vortices, vortex up-conversion, and anti-vortex up-conversion. Our findings indicate that all solitons can propagate stably through the crystals for 10 centimeters; however, only the vortex-doubling case remains stable over longer distances. This work enhances the understanding of vortex beam manipulation within 3D QPM-PhCs. △ Less

Submitted 16 August, 2024; originally announced August 2024.

Comments: to be published in Chaos, Solitons & Fractals

Panoramic single-pixel imaging with megapixel resolution based on rotational subdivision

Authors: Huan Cui, Jie Cao, Haoyu Zhang, Chang Zhou, Haifeng Yao, Yingbo Wang, Qun Hao

Abstract: Single-pixel imaging (SPI) using a single-pixel detector is an unconventional imaging method, which has great application prospects in many fields to realize high-performance imaging. In especial, the recent proposed catadioptric panoramic ghost imaging (CPGI) extends the application potential of SPI to high-performance imaging at a wide field of view (FOV) with recent growing demands. However, th… ▽ More Single-pixel imaging (SPI) using a single-pixel detector is an unconventional imaging method, which has great application prospects in many fields to realize high-performance imaging. In especial, the recent proposed catadioptric panoramic ghost imaging (CPGI) extends the application potential of SPI to high-performance imaging at a wide field of view (FOV) with recent growing demands. However, the resolution of CPGI is limited by hardware parameters of the digital micromirror device (DMD), which may not meet ultrahigh-resolution panoramic imaging needs that require detailed information. Therefore, to overcome the resolution limitation of CPGI, we propose a panoramic SPI based on rotational subdivision (RSPSI). The key of the proposed RSPSI is to obtain the entire panoramic scene by the rotation-scanning with a rotating mirror tilted 45°, so that one single pattern that only covers one sub-Fov with a small FOV can complete a uninterrupted modulation on the entire panoramic FOV during a once-through pattern projection. Then, based on temporal resolution subdivision, images sequence of sub-Fovs subdivided from the entire panoramic FOV can be reconstructed with pixels-level or even subpixels-level horizontal shifting adjacently. Experimental results using a proof-of-concept setup show that the panoramic image can be obtained with 10428*543 of 5,662,404 pixels, which is more than 9.6 times higher than the resolution limit of the CPGI using the same DMD. To our best knowledge, the RSPSI is the first to achieve a megapixel resolution via SPI, which can provide potential applications in fields requiring the imaging with ultrahigh-resolution and wide FOV. △ Less

Submitted 26 July, 2024; originally announced July 2024.

Global destabilization of drift-tearing mode with coupling to discretized electron drift-wave instability

Authors: J. Bao, W. L. Zhang, Z. Lin, H. S. Cai, D. J. Liu, H. T. Chen, C. Dong, J. T. Cao, D. Li

Abstract: The global linear behaviors of 2/1 DTM in the collisional regime are investigated based on a concisely resistive drift-MHD model. Besides DTM, extra normal modes including EDW and SAW are coupled together and destabilized in different parameter regimes by considering resistivity in this system. The EVP approach is applied for solving the eigenstate spectra with the distribution of all unstable sol… ▽ More The global linear behaviors of 2/1 DTM in the collisional regime are investigated based on a concisely resistive drift-MHD model. Besides DTM, extra normal modes including EDW and SAW are coupled together and destabilized in different parameter regimes by considering resistivity in this system. The EVP approach is applied for solving the eigenstate spectra with the distribution of all unstable solutions. It is found that in the small EDD frequency (omega_*e) regime, DTM growth rate agrees well with local theory that is reduced with increasing omega_*e. However, when omega_*e exceeds a critical threshold omega_*crit, the strongly linear coupling between DTM and other discretized EDW instabilities happens so that the free energies from current and pressure channels can be released together and thus enhance the DTM, of which growth rate increases with increasing omega_*e and deviates from local theory results qualitatively. Correspondingly, a cross-scale mode structure forms with mixed polarization, namely, phi perturbation is dominated by electrostatic polarized short-wavelength oscillation as EDW instability character, and A_para perturbation remains typical tearing mode solution of Alfvenic polarized macroscopic structure. Within omega_*e > omega_*crit, the additional IDD causes phi oscillating structure to shift towards small density gradient domain, which cancels the extra drive from ion channel and thus DTM growth rate is insensitive to IDD frequency. Compared to EDD effects, the IDD effect alone with zero-omega_*e only leads to the stabilization of RTM that shows agreements between global simulation and local theory, which is no longer the condition for DTM regime. These results are useful for clarifying the DTM global properties with underlying physics mechanisms, which occurs in the regime of omega_*e >> gamma_c that is relevant to nowadays tokamak discharges with hot plasmas. △ Less

Submitted 15 July, 2024; originally announced July 2024.

Comments: 23 pages, 15 figues

High power GaSb-based distributed feedback laser with laterally coupled dielectric gratings at 1.95μm

Authors: Zhengqing Ding, Juntian Cao, Kun Zhan, Yihang Chen, Lidan Zhou, Hao Tan, Chenao Yang, Ying Yu, Zhichuan Niu, Siyuan Yu

Abstract: Traditional Distributed Feedback (DFB) or Distributed Bragg Reflector (DBR) lasers typically utilize buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often necessitates regrowth processes, which can pose technical challenges for materials platforms such as GaAs and GaSb. Metal gratings were also used for GaSb lasers but they introduce ad… ▽ More Traditional Distributed Feedback (DFB) or Distributed Bragg Reflector (DBR) lasers typically utilize buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often necessitates regrowth processes, which can pose technical challenges for materials platforms such as GaAs and GaSb. Metal gratings were also used for GaSb lasers but they introduce additional absorption loss that limits device efficiency and output power. In this paper, we introduce a novel laterally coupled dielectric Bragg grating structure, which enables highly controllable, deterministic, and stable coupling between the grating and the optical mode. Our device demonstrates a continuous-wave output power of 47.02 mW at room temperature, exhibiting stable single-mode operation from 300-1000 mA and achieving a maximum side mode suppression ratio of 46.7 dB. These results underscore the innovative lateral coupled dielectric grating as a feasible and technologically superior approach for fabricating DFB and DBR lasers, which hold universal applicability across different material platforms and wavelength bands. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 9 pages, 7 figures, 1 table

MSC Class: 78A60 ACM Class: J.2.6

Heat transfer enhancement by mist/air two-phase flow in a high-temperature channel

Authors: Junxian Cao, Mengqi Ye, Haiwang Li, Tianyou Wang, Zhizhao Che

Abstract: Mist/air two-phase flow is a promising cooling technique for many applications such as internal cooling of gas turbine blades. A significant enhancement of heat transfer can be achieved with a low mass fraction of droplets by utilizing the latent heat of the droplets. Using newly designed atomizers to accurately control the mist droplets, this study experimentally explores the heat transfer perfor… ▽ More Mist/air two-phase flow is a promising cooling technique for many applications such as internal cooling of gas turbine blades. A significant enhancement of heat transfer can be achieved with a low mass fraction of droplets by utilizing the latent heat of the droplets. Using newly designed atomizers to accurately control the mist droplets, this study experimentally explores the heat transfer performance of mist/air flow in a high-temperature channel with a maximum temperature of 880 K. The effects of the mist/air mass ratio, droplet size, Reynolds number, and wall heat flux are studied. The results show that the cooling performance of the test section can be significantly improved by even adding a small amount of droplets. Considering mist droplets of different sizes, larger droplets can cause more remarkable temperature reduction, while smaller droplets can improve the uniformity of temperature distribution. For large droplets, the cooling effect in the upstream is more obvious than that in the downstream due to the interaction between the wall and the droplets, and with the increase of mist/air mass ratio, the area with obvious cooling extends downstream. The performance of mist/air cooling is tested by increasing the heat flux until the maximum temperature at the outlet reaches a predetermined value. Compared with air-only cooling, the increment in the wall heat flux by the mist/air cooling with a mass ratio of 3% can be up to 18.4%. △ Less

Submitted 6 July, 2024; originally announced July 2024.

Comments: 16 pages, 10 figures

Journal ref: International Journal of Heat and Mass Transfer. Volume 193, 1 September 2022, 122966Volume 193, 1 September 2022, 122966

Burn-in Test and Thermal Performance Evaluation of Silicon Photomultipliers for the JUNO-TAO Experiment

Authors: X. Chen, G. F. Cao, M. H. Qu, H. W. Wang, N. Anfimov, A. Rybnikov, J. Y. Xu, A. Q. Su, Z. L. Chen, J. Cao, Y. C. Li, M. Qi

Abstract: This study evaluates more than 4,000 tiles made of Hamamatsu visual-sensitive silicon photomultipier (SiPM), each with dimensions of 5 $\times$ 5 cm$^2$, intended for the central detector of the Taishan Anti-neutrino Observatory (TAO), a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO) aimed at measuring the reactor anti-neutrino energy spectrum with unprecedented energ… ▽ More This study evaluates more than 4,000 tiles made of Hamamatsu visual-sensitive silicon photomultipier (SiPM), each with dimensions of 5 $\times$ 5 cm$^2$, intended for the central detector of the Taishan Anti-neutrino Observatory (TAO), a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO) aimed at measuring the reactor anti-neutrino energy spectrum with unprecedented energy resolution. All SiPM tiles underwent a room temperature burn-in test in the dark for two weeks, while cryogenic testing analyzed the thermal dependence of parameters for some sampled SiPMs. Results from these comprehensive tests provide crucial insights into the long-term performance and stability of the 10 square meters of SiPMs operating at -50°C to detect scintillation photons in the TAO detector. Despite some anomalies awaiting further inspection, all SiPMs successfully passed the burn-in test over two weeks at room temperature, which is equivalent to 6.7 years at -50°C. Results are also used to guide optimal SiPM selection, configuration, and operation, ensuring reliability and sustainability in reactor neutrino measurements. This work also provides insights for a rapid and robust quality assessment in future experiments that employ large-scale SiPMs as detection systems. △ Less

Submitted 23 July, 2024; v1 submitted 13 June, 2024; originally announced June 2024.

Comments: 17 pages, 15 figures, submitted to JINST

Report number: JUNO-doc-11626

Search for fractionally charged particles with CUORE

Authors: CUORE Collaboration, D. Q. Adams, C. Alduino, K. Alfonso, F. T. Avignone III, O. Azzolini, G. Bari, F. Bellini, G. Benato, M. Beretta, M. Biassoni, A. Branca, C. Brofferio, C. Bucci, J. Camilleri, A. Caminata, A. Campani, J. Cao, S. Capelli, C. Capelli, L. Cappelli, L. Cardani, P. Carniti, N. Casali, E. Celi , et al. (95 additional authors not shown)

Abstract: The Cryogenic Underground Observatory for Rare Events (CUORE) is a detector array comprised by 988 5$\;$cm$\times$5$\;$cm$\times$5$\;$cm TeO$_2$ crystals held below 20 mK, primarily searching for neutrinoless double-beta decay in $^{130}$Te. Unprecedented in size amongst cryogenic calorimetric experiments, CUORE provides a promising setting for the study of exotic through-going particles. Using th… ▽ More The Cryogenic Underground Observatory for Rare Events (CUORE) is a detector array comprised by 988 5$\;$cm$\times$5$\;$cm$\times$5$\;$cm TeO$_2$ crystals held below 20 mK, primarily searching for neutrinoless double-beta decay in $^{130}$Te. Unprecedented in size amongst cryogenic calorimetric experiments, CUORE provides a promising setting for the study of exotic through-going particles. Using the first tonne-year of CUORE's exposure, we perform a search for hypothesized fractionally charged particles (FCPs), which are well-motivated by various Standard Model extensions and would have suppressed interactions with matter. No excess of FCP candidate tracks is observed over background, setting leading limits on the underground FCP flux with charges between $e/24-e/5$ at 90\% confidence level. Using the low background environment and segmented geometry of CUORE, we establish the sensitivity of tonne-scale sub-Kelvin detectors to diverse signatures of new physics. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 7 pages, 5 figures

A Multi-Scale Boltzmann Equation for Complex Systems of Neutral Gases across All Flow Regimes

Authors: Sha Liu, Junzhe Cao, Sirui Yang, Chengwen Zhong

Abstract: A Multi-scale Boltzmann Equation (MBE) is found from the gas-kinetic theory and the direct modeling philosophy as a master equation for complex physical systems of neutral gases across all flow regimes, which locates between the continuum limit and the free-molecular limit, covering a vast range of applications such as hypersonic flows over aerospace crafts and delicate flows around MEMS. The most… ▽ More A Multi-scale Boltzmann Equation (MBE) is found from the gas-kinetic theory and the direct modeling philosophy as a master equation for complex physical systems of neutral gases across all flow regimes, which locates between the continuum limit and the free-molecular limit, covering a vast range of applications such as hypersonic flows over aerospace crafts and delicate flows around MEMS. The most explicit characteristic of MBE is evolving the variable observation time in the expression, which distinguishes the MBE from the single-scale master or governing equation where a fixed scale is implied in the assumptions. The fundamental properties of MBE, such as the asymptotic property, are proved theoretically, while a concise numerical scheme is developed for MBE to demonstrate its validity by benchmark multi-scale problems. △ Less

Submitted 2 August, 2024; v1 submitted 11 June, 2024; originally announced June 2024.

Data-driven background model for the CUORE experiment

Authors: CUORE Collaboration, D. Q. Adams, C. Alduino, K. Alfonso, F. T. Avignone III, O. Azzolini, G. Bari, F. Bellini, G. Benato, M. Beretta, M. Biassoni, A. Branca, C. Brofferio, C. Bucci, J. Camilleri, A. Caminata, A. Campani, J. Cao, S. Capelli, C. Capelli, L. Cappelli, L. Cardani, P. Carniti, N. Casali, E. Celi , et al. (93 additional authors not shown)

Abstract: We present the model we developed to reconstruct the CUORE radioactive background based on the analysis of an experimental exposure of 1038.4 kg yr. The data reconstruction relies on a simultaneous Bayesian fit applied to energy spectra over a broad energy range. The high granularity of the CUORE detector, together with the large exposure and extended stable operations, allow for an in-depth explo… ▽ More We present the model we developed to reconstruct the CUORE radioactive background based on the analysis of an experimental exposure of 1038.4 kg yr. The data reconstruction relies on a simultaneous Bayesian fit applied to energy spectra over a broad energy range. The high granularity of the CUORE detector, together with the large exposure and extended stable operations, allow for an in-depth exploration of both spatial and time dependence of backgrounds. We achieve high sensitivity to both bulk and surface activities of the materials of the setup, detecting levels as low as 10 nBq kg$^{-1}$ and 0.1 nBq cm$^{-2}$, respectively. We compare the contamination levels we extract from the background model with prior radio-assay data, which informs future background risk mitigation strategies. The results of this background model play a crucial role in constructing the background budget for the CUPID experiment as it will exploit the same CUORE infrastructure. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Prediction of Energy Resolution in the JUNO Experiment

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta, Antonio Bergnoli, Daniel Bick , et al. (629 additional authors not shown)

Abstract: This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components o… ▽ More This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components of the JUNO detector. Various factors affecting the detection of inverse beta decay signals have an impact on the energy resolution, extending beyond the statistical fluctuations of the detected number of photons, such as the properties of the liquid scintillator, performance of photomultiplier tubes, and the energy reconstruction algorithm. To account for these effects, a full JUNO simulation and reconstruction approach is employed. This enables the modeling of all relevant effects and the evaluation of associated inputs to accurately estimate the energy resolution. The results of study reveal an energy resolution of 2.95\% at 1~MeV. Furthermore, this study assesses the contribution of major effects to the overall energy resolution budget. This analysis serves as a reference for interpreting future measurements of energy resolution during JUNO data collection. Moreover, it provides a guideline for comprehending the energy resolution characteristics of liquid scintillator-based detectors. △ Less

Submitted 9 January, 2025; v1 submitted 28 May, 2024; originally announced May 2024.

Journal ref: Chinese Phys. C 49 013003 (2025)

Correlations between X-rays, Visible Light and Drive-Beam Energy Loss Observed in Plasma Wakefield Acceleration Experiments at FACET-II

Authors: Chaojie Zhang, Doug Storey, Pablo San Miguel Claveria, Zan Nie, Ken A. Marsh, Warren B. Mori, Erik Adli, Weiming An, Robert Ariniello, Gevy J. Cao, Christine Clark, Sebastien Corde, Thamine Dalichaouch, Christopher E. Doss, Claudio Emma, Henrik Ekerfelt, Elias Gerstmayr, Spencer Gessner, Claire Hansel, Alexander Knetsch, Valentina Lee, Fei Li, Mike Litos, Brendan O'Shea, Glen White , et al. (4 additional authors not shown)

Abstract: This study documents several correlations observed during the first run of the plasma wakefield acceleration experiment E300 conducted at FACET-II, using a single drive electron bunch. The established correlations include those between the measured maximum energy loss of the drive electron beam and the integrated betatron x-ray signal, the calculated total beam energy deposited in the plasma and t… ▽ More This study documents several correlations observed during the first run of the plasma wakefield acceleration experiment E300 conducted at FACET-II, using a single drive electron bunch. The established correlations include those between the measured maximum energy loss of the drive electron beam and the integrated betatron x-ray signal, the calculated total beam energy deposited in the plasma and the integrated x-ray signal, among three visible light emission measuring cameras, and between the visible plasma light and x-ray signal. The integrated x-ray signal correlates almost linearly with both the maximum energy loss of the drive beam and the energy deposited into the plasma, demonstrating its usability as a measure of energy transfer from the drive beam to the plasma. Visible plasma light is found to be a useful indicator of the presence of wake at three locations that overall are two meters apart. Despite the complex dynamics and vastly different timescales, the x-ray radiation from the drive bunch and visible light emission from the plasma may prove to be effective non-invasive diagnostics for monitoring the energy transfer from the beam to the plasma in future high-repetition-rate experiments. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 20 pages, 6 figures

Xiwu: A Basis Flexible and Learnable LLM for High Energy Physics

Authors: Zhengde Zhang, Yiyu Zhang, Haodong Yao, Jianwen Luo, Rui Zhao, Bo Huang, Jiameng Zhao, Yipu Liao, Ke Li, Lina Zhao, Jun Cao, Fazhi Qi, Changzheng Yuan

Abstract: Large Language Models (LLMs) are undergoing a period of rapid updates and changes, with state-of-the-art (SOTA) model frequently being replaced. When applying LLMs to a specific scientific field, it's challenging to acquire unique domain knowledge while keeping the model itself advanced. To address this challenge, a sophisticated large language model system named as Xiwu has been developed, allowi… ▽ More Large Language Models (LLMs) are undergoing a period of rapid updates and changes, with state-of-the-art (SOTA) model frequently being replaced. When applying LLMs to a specific scientific field, it's challenging to acquire unique domain knowledge while keeping the model itself advanced. To address this challenge, a sophisticated large language model system named as Xiwu has been developed, allowing you switch between the most advanced foundation models and quickly teach the model domain knowledge. In this work, we will report on the best practices for applying LLMs in the field of high-energy physics (HEP), including: a seed fission technology is proposed and some data collection and cleaning tools are developed to quickly obtain domain AI-Ready dataset; a just-in-time learning system is implemented based on the vector store technology; an on-the-fly fine-tuning system has been developed to facilitate rapid training under a specified foundation model. The results show that Xiwu can smoothly switch between foundation models such as LLaMA, Vicuna, ChatGLM and Grok-1. The trained Xiwu model is significantly outperformed the benchmark model on the HEP knowledge question-and-answering and code generation. This strategy significantly enhances the potential for growth of our model's performance, with the hope of surpassing GPT-4 as it evolves with the development of open-source models. This work provides a customized LLM for the field of HEP, while also offering references for applying LLM to other fields, the corresponding codes are available on Github. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Comments: 15 pages, 8 figures

ACM Class: I.2.7

Extracting Kinetic Information from Short-Time Trajectories: Relaxation and Disorder of Lossy Cavity Polaritons

Authors: Andrew Wu, Javier Cerrillo, Jianshu Cao

Abstract: The emerging field of molecular cavity polaritons has stimulated a surge of experimental and theoretical activities and presents a unique opportunity to develop the many-body simulation methodology. This paper presents a numerical scheme for the extraction of key kinetic information of lossy cavity polaritons based on the transfer tensor method (TTM). Steady state, relaxation timescales and oscill… ▽ More The emerging field of molecular cavity polaritons has stimulated a surge of experimental and theoretical activities and presents a unique opportunity to develop the many-body simulation methodology. This paper presents a numerical scheme for the extraction of key kinetic information of lossy cavity polaritons based on the transfer tensor method (TTM). Steady state, relaxation timescales and oscillatory phenomena can all be deduced directly from a set of transfer tensors without the need for long-time simulation. Moreover, we generalize TTM to disordered systems by sampling dynamical maps and achieve fast convergence to disordered-averaged dynamics using a small set of realizations. Together, these techniques provide a toolbox for characterizing the interplay of cavity loss, disorder, and cooperativity in polariton relaxation and allow us to predict unusual dependences on the initial excitation state, photon decay rate, strength of disorder, and the type of cavity models. Thus, we have demonstrated significant potential in the use of the TTM towards both the efficient computation of long-time polariton dynamics and the extraction of crucial kinetic information about polariton relaxation from a small set of short-time trajectories. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Comments: 24 pages, 13 figures

Doppler Tracking Data of Martian Mission Tianwen-I and Upper Limit of Stochastic Gravitational Wave Background

Authors: Xiaoming Bi, Zhongkai Guo, Xiaobo Zou, Yong Huang, Peijia Li, Jianfeng Cao, Lue Chen, Wenlin Tang, Yun Kau Lau

Abstract: Two way ranging data for spacecraft tracking of China's first Martian mission Tianwen-I is analysed. Shortly before the spacecraft entered the Mars parking orbit, the two way coherent microwave link between the spacecraft and the Earth resembles a long arm gravitational wave interferometer, with both the spacecraft and the Earth regarded as in an approximate free falling state. By carefully select… ▽ More Two way ranging data for spacecraft tracking of China's first Martian mission Tianwen-I is analysed. Shortly before the spacecraft entered the Mars parking orbit, the two way coherent microwave link between the spacecraft and the Earth resembles a long arm gravitational wave interferometer, with both the spacecraft and the Earth regarded as in an approximate free falling state. By carefully selecting and analysing data segments of the time series of the two way ranging data during this time span, a parametric statistical model is built for the data segments and an upper limit for the stochastic gravitational waves background (SGWB) is then estimated within the frequency window 0.1Hz to 0.1 mHz. The upper bound improves considerably on those obtained before. In particular, around the deci-Hz band, there is a three orders improvement on the bound obtained previously by the two way ranging data of the Chang e 3 mission. Scientific applications of the upper bound is then considered and a weak upper bound is worked out for axions which is a promising candidate for ultra light dark matter. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Comments: 10 pages, 8 figures

Propagation properties of partially coherent electromagnetic hyperbolic-sine-Gaussian vortex beam through anisotropic atmospheric turbulence

Authors: Jin Cao, Rufeng Tang, Kai Huang, Yuqiang Li, Yonggen Xu

Abstract: Utilizing the extended Huygens-Fresnel principle and the Rytov approximation, the analytical formula for the propagation of a partially coherent electromagnetic hyperbolic-sine-Gaussian vortex beam (PCEShVB) in anisotropic atmospheric turbulence has been theoretically derived. Detailed studies have been conducted on the evolution characteristics of average intensity, the degree of coherence (DOC)… ▽ More Utilizing the extended Huygens-Fresnel principle and the Rytov approximation, the analytical formula for the propagation of a partially coherent electromagnetic hyperbolic-sine-Gaussian vortex beam (PCEShVB) in anisotropic atmospheric turbulence has been theoretically derived. Detailed studies have been conducted on the evolution characteristics of average intensity, the degree of coherence (DOC) and the degree of polarization (DOP) of the beam in turbulence. The results show that during propagation, the intensity distribution of the beam will exhibit a spiral structure, and the overall distribution of light spots will rotate in a direction related to the sign of the topological charge. The DOC distribution of PCEShVB will display a pattern reminiscent of beam interference fringes with an increase in propagation distance, with the number of 'interference fringes' greatly impacted by the hyperbolic sine parameter. Furthermore, PCEShVB with large initial coherent length and hyperbolic sine parameter will increase the degree of separation of the spots and yield a large DOP. Finally, for the validation of the theoretical findings, the random phase screen method was employed to simulate the propagation of PCEShVB through anisotropic atmospheric turbulence. The studies revealed a consistent alignment between the simulation results and the theoretical predictions. △ Less

Submitted 7 January, 2024; originally announced January 2024.

Journal ref: J. Opt. Soc. Am. A 41, 371-381 (2024)

Scattering from time-modulated subwavelength resonators

Authors: Habib Ammari, Jinghao Cao, Erik Orvehed Hiltunen, Liora Rueff

Abstract: We consider wave scattering from a system of highly contrasting resonators with time-modulated material parameters. In this setting, the wave equation reduces to a system of coupled Helmholtz equations that models the scattering problem. We consider the one-dimensional setting. In order to understand the energy of the system, we prove a novel higher-order discrete, capacitance matrix approximation… ▽ More We consider wave scattering from a system of highly contrasting resonators with time-modulated material parameters. In this setting, the wave equation reduces to a system of coupled Helmholtz equations that models the scattering problem. We consider the one-dimensional setting. In order to understand the energy of the system, we prove a novel higher-order discrete, capacitance matrix approximation of the subwavelength resonant quasifrequencies. Further, we perform numerical experiments to support and illustrate our analytical results and show how periodically time-dependent material parameters affect the scattered wave field. △ Less

Submitted 2 January, 2024; originally announced January 2024.

Comments: 20 pages, 9 figures

MSC Class: 35J05; 35C20; 35P20; 74J20

Statistical Parameterized Physics-Based Machine Learning Digital Twin Models for Laser Powder Bed Fusion Process

Authors: Yangfan Li, Satyajit Mojumder, Ye Lu, Abdullah Al Amin, Jiachen Guo, Xiaoyu Xie, Wei Chen, Gregory J. Wagner, Jian Cao, Wing Kam Liu

Abstract: A digital twin (DT) is a virtual representation of physical process, products and/or systems that requires a high-fidelity computational model for continuous update through the integration of sensor data and user input. In the context of laser powder bed fusion (LPBF) additive manufacturing, a digital twin of the manufacturing process can offer predictions for the produced parts, diagnostics for m… ▽ More A digital twin (DT) is a virtual representation of physical process, products and/or systems that requires a high-fidelity computational model for continuous update through the integration of sensor data and user input. In the context of laser powder bed fusion (LPBF) additive manufacturing, a digital twin of the manufacturing process can offer predictions for the produced parts, diagnostics for manufacturing defects, as well as control capabilities. This paper introduces a parameterized physics-based digital twin (PPB-DT) for the statistical predictions of LPBF metal additive manufacturing process. We accomplish this by creating a high-fidelity computational model that accurately represents the melt pool phenomena and subsequently calibrating and validating it through controlled experiments. In PPB-DT, a mechanistic reduced-order method-driven stochastic calibration process is introduced, which enables the statistical predictions of the melt pool geometries and the identification of defects such as lack-of-fusion porosity and surface roughness, specifically for diagnostic applications. Leveraging data derived from this physics-based model and experiments, we have trained a machine learning-based digital twin (PPB-ML-DT) model for predicting, monitoring, and controlling melt pool geometries. These proposed digital twin models can be employed for predictions, control, optimization, and quality assurance within the LPBF process, ultimately expediting product development and certification in LPBF-based metal additive manufacturing. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: arXiv admin note: text overlap with arXiv:2208.02907

Coherent spatial control of wave packet dynamics on quantum lattices

Authors: Ilia Tutunnikov, Chern Chuang, Jianshu Cao

Abstract: Quantum lattices are pivotal in the burgeoning fields of quantum materials and information science. Rapid developments in microscopy and quantum engineering allow for preparing and monitoring wave-packet dynamics on quantum lattices with increasing spatial and temporal resolution. Motivated by these emerging research interests, we present an analytical study of wave packet diffusivity and diffusio… ▽ More Quantum lattices are pivotal in the burgeoning fields of quantum materials and information science. Rapid developments in microscopy and quantum engineering allow for preparing and monitoring wave-packet dynamics on quantum lattices with increasing spatial and temporal resolution. Motivated by these emerging research interests, we present an analytical study of wave packet diffusivity and diffusion length on tight-binding quantum lattices subject to stochastic noise. Our analysis points to the crucial role of spatial coherence and predicts a set of novel phenomena: noise can enhance the transient diffusivity and diffusion length of sufficiently extended initial states; A smooth Gaussian initial state spreads slower than a localized initial state; A standing or traveling initial state with large momentum spreads faster than a localized initial state and exhibits a noise-induced peak in the transient diffusivity; The change in the time-dependent diffusivity and diffusion length relative to a localized initial state follows a universal dependence on the Gaussian width. These theoretical predictions and the underlying mechanism of spatial coherence suggest the possibility of controlling the wave packet dynamics on quantum lattices by spatial manipulations, which will have implications for materials science and quantum technologies. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 8 pages, 5 figures

Journal ref: J. Phys. Chem. Lett. 2023, 14, 51, 11632-11639

Flexible uniform-sampling foveated Fourier single-pixel imaging

Authors: Huan Cui, Jie Cao, Qun Hao, Haoyu Zhang, Chang Zhou

Abstract: Fourier single-pixel imaging (FSI) is a data-efficient single-pixel imaging (SPI). However, there is still a serious challenge to obtain higher imaging quality using fewer measurements, which limits the development of real-time SPI. In this work, a uniform-sampling foveated FSI (UFFSI) is proposed with three features, uniform sampling, effective sampling and flexible fovea, to achieve under-sampli… ▽ More Fourier single-pixel imaging (FSI) is a data-efficient single-pixel imaging (SPI). However, there is still a serious challenge to obtain higher imaging quality using fewer measurements, which limits the development of real-time SPI. In this work, a uniform-sampling foveated FSI (UFFSI) is proposed with three features, uniform sampling, effective sampling and flexible fovea, to achieve under-sampling high-efficiency and high-quality SPI, even in a large-scale scene. First, by flexibly using the three proposed foveated pattern structures, data redundancy is reduced significantly to only require high resolution (HR) on regions of interest (ROIs), which radically reduces the need of total data number. Next, by the non-uniform weight distribution processing, non-uniform spatial sampling is transformed into uniform sampling, then the fast Fourier transform is used accurately and directly to obtain under-sampling high imaging quality with further reduced measurements. At a sampling ratio of 0.0084 referring to HR FSI with 1024*768 pixels, experimentally, by UFFSI with 255*341 cells of 89% reduction in data redundancy, the ROI has a significantly better imaging quality to meet imaging needs. We hope this work can provide a breakthrough for future real-time SPI. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: 7 pages,5 figures

Analysis to closed surface-wave photonic crystal waveguides based on coupled-resonator optical waveguide theory

Authors: Y. H. Zheng, C. Wang, J. C. Cao

Abstract: Traditionally, one can construct a waveguide by introduce defects into surface-wave photonic crystals (SPCs). Here we propose a new structure named closed SPC that can introduce waveguide modes out of photonic bandgap of surface-wave photonic crystal. In this paper, we have comprehensively analyzed dispersion relation, group velocity, normalized transmission and electric field distribution of clos… ▽ More Traditionally, one can construct a waveguide by introduce defects into surface-wave photonic crystals (SPCs). Here we propose a new structure named closed SPC that can introduce waveguide modes out of photonic bandgap of surface-wave photonic crystal. In this paper, we have comprehensively analyzed dispersion relation, group velocity, normalized transmission and electric field distribution of closed SPC waveguides, and propose several methods to improve performance of the waveguide based on coupled-resonator optical waveguide theory. These methods can improve transmission efficiency from 10% to 60% and eliminate intraband oscillation by adjusting eigenfrequency and coupling factor . These methods are applicable to both single mode and multi mode situations. This letter also paves a new way for improving the performance of other coupled-resonator waveguides. △ Less

Submitted 31 October, 2023; originally announced October 2023.

Cavity-Induced Quantum Interference and Collective Interactions in van der Waals Systems

Authors: Jianshu Cao, Eli Pollak

Abstract: The central topic of this letter is to show that light-matter hybridization not only gives rise to novel dynamic responses but can also modify intermolecular interactions and induce new structural order. Using the van der Waals (vdW) system in an optical cavity as an example, we predict the effects of interference and collectivity in cavity-induced many-body dispersion interactions. Specifically,… ▽ More The central topic of this letter is to show that light-matter hybridization not only gives rise to novel dynamic responses but can also modify intermolecular interactions and induce new structural order. Using the van der Waals (vdW) system in an optical cavity as an example, we predict the effects of interference and collectivity in cavity-induced many-body dispersion interactions. Specifically, the leading order correction due to cavity-induced quantum fluctuations leads to 3-body and 4-body vdW interactions, which can align intermolecular vectors and are not pairwise additive. In addition, the cavity-induced dipole leads to a single-molecule energy shift that aligns individual molecules, and a pair-wise interaction that scales as $R^{-3}$ instead of the standard $R^{-6}$ distance scaling. The coefficients of all these cavity-induced corrections depend on the cavity frequency and are renormalized by the effective Rabi frequency, which in turn depends on the particle density. Finally, we study the interaction of the vdW system in a cavity with an external object and find a significant enhancement in the interaction range due to modified distance scaling laws. These theoretical predictions suggest the possibility of cavity-induced nematic or smectic order and may provide an essential clue to understanding intriguing phenomena observed in optical cavities, such as strongly-modified ground-state reactivity, ion transport and solvent polarity. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Demonstration of chronometric leveling using transportable optical clocks beyond laser coherence limit

Authors: Yi Yuan, Kaifeng Cui, Daoxin Liu, Jinbo Yuan, Jian Cao, Dehao Wang, Sijia Chao, Hualin Shu, Xueren Haung

Abstract: Optical clock network requires the establishment of optical frequency transmission link between multiple optical clocks, utilizing narrow linewidth lasers. Despite achieving link noise levels of 10${^{-20}}$, the final accuracy is limited by the phase noise of the clock laser. Correlation spectroscopy is developed to transmit frequency information between two optical clocks directly, enabling opti… ▽ More Optical clock network requires the establishment of optical frequency transmission link between multiple optical clocks, utilizing narrow linewidth lasers. Despite achieving link noise levels of 10${^{-20}}$, the final accuracy is limited by the phase noise of the clock laser. Correlation spectroscopy is developed to transmit frequency information between two optical clocks directly, enabling optical clock comparison beyond the phase noise limit of clock lasers, and significantly enhancing the measurement accuracy or shorten the measurement time. In this letter, two compact transportable ${^{40}}$Ca${^+}$ clocks are employed to accomplish the correlation spectroscopy comparison, demonstrating an 10 cm level measurement accuracy of chronometric leveling using a mediocre clock laser with linewidth of 200 Hz. The relative frequency instability reaches $6.0\times10{^{-15}}/\sqrt{τ/s}$, which is about 20 times better than the result with Rabi spectroscopy using the same clock laser. This research greatly reduces the harsh requirements on the performance of the clock laser, so that an ordinary stable-laser can also be employed in the construction of optical clock network, which is essential for the field applications, especially for the chronometric leveling. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Wakefield Generation in Hydrogen and Lithium Plasmas at FACET-II: Diagnostics and First Beam-Plasma Interaction Results

Authors: D. Storey, C. Zhang, P. San Miguel Claveria, G. J. Cao, E. Adli, L. Alsberg, R. Ariniello, C. Clarke, S. Corde, T. N. Dalichaouch, H. Ekerfelt, C. Emma, E. Gerstmayr, S. Gessner, M. Gilljohann, C. Hast, A. Knetsch, V. Lee, M. Litos, R. Loney, K. A. Marsh, A. Matheron, W. B. Mori, Z. Nie, B. O'Shea , et al. (6 additional authors not shown)

Abstract: Plasma Wakefield Acceleration (PWFA) provides ultrahigh acceleration gradients of 10s of GeV/m, providing a novel path towards efficient, compact, TeV-scale linear colliders and high brightness free electron lasers. Critical to the success of these applications is demonstrating simultaneously high gradient acceleration, high energy transfer efficiency, and preservation of emittance, charge, and en… ▽ More Plasma Wakefield Acceleration (PWFA) provides ultrahigh acceleration gradients of 10s of GeV/m, providing a novel path towards efficient, compact, TeV-scale linear colliders and high brightness free electron lasers. Critical to the success of these applications is demonstrating simultaneously high gradient acceleration, high energy transfer efficiency, and preservation of emittance, charge, and energy spread. Experiments at the FACET-II National User Facility at SLAC National Accelerator Laboratory aim to achieve all of these milestones in a single stage plasma wakefield accelerator, providing a 10 GeV energy gain in a <1 m plasma with high energy transfer efficiency. Such a demonstration depends critically on diagnostics able to measure emittance with mm-mrad accuracy, energy spectra to determine both %-level energy spread and broadband energy gain and loss, incoming longitudinal phase space, and matching dynamics. This paper discusses the experimental setup at FACET-II, including the incoming beam parameters from the FACET-II linac, plasma sources, and diagnostics developed to meet this challenge. Initial progress on the generation of beam ionized wakes in meter-scale hydrogen gas is discussed, as well as commissioning of the plasma sources and diagnostics. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Generation of meter-scale hydrogen plasmas and efficient, pump-depletion-limited wakefield excitation using 10 GeV electron bunches

Authors: C. Zhang, D. Storey, P. San Miguel Claveria, Z. Nie, K. A. Marsh, M. Hogan, W. B. Mori, E. Adli, W. An, R. Ariniello, G. J. Cao, C. Clarke, S. Corde, T. Dalichaouch, C. E. Doss, C. Emma, H. Ekerfelt, E. Gerstmayr, S. Gessner, C. Hansel, A. Knetsch, V. Lee, F. Li, M. Litos, B. O'Shea , et al. (4 additional authors not shown)

Abstract: High repetition rates and efficient energy transfer to the accelerating beam are important for a future linear collider based on the beam-driven plasma wakefield acceleration scheme (PWFA-LC). This paper reports the first results from the Plasma Wakefield Acceleration Collaboration (E300) that are beginning to address both of these issues using the recently commissioned FACET-II facility at SLAC.… ▽ More High repetition rates and efficient energy transfer to the accelerating beam are important for a future linear collider based on the beam-driven plasma wakefield acceleration scheme (PWFA-LC). This paper reports the first results from the Plasma Wakefield Acceleration Collaboration (E300) that are beginning to address both of these issues using the recently commissioned FACET-II facility at SLAC. We have generated meter-scale hydrogen plasmas using time-structured 10 GeV electron bunches from FACET-II, which hold the promise of dramatically increasing the repetition rate of PWFA by rapidly replenishing the gas between each shot compared to the hitherto used lithium plasmas that operate at 1-10 Hz. Furthermore, we have excited wakes in such plasmas that are suitable for high gradient particle acceleration with high drive-bunch to wake energy transfer efficiency -- a first step in achieving a high overall energy transfer efficiency. We have done this by using time-structured electron drive bunches that typically have one or more ultra-high current (>30 kA) femtosecond spike(s) superimposed on a longer (~0.4 ps) lower current (<10 kA) bunch structure. The first spike effectively field-ionizes the gas and produces a meter-scale (30-160 cm) plasma, whereas the subsequent beam charge creates a wake. The length and amplitude of the wake depends on the longitudinal current profile of the bunch and plasma density. We find that the onset of pump depletion, when some of the drive beam electrons are nearly fully depleted of their energy, occurs for hydrogen pressure >1.5 Torr. We also show that some electrons in the rear of the bunch can gain several GeV energies from the wake. These results are reproduced by particle-in-cell simulations using the QPAD code. At a pressure of ~2 Torr, simulations results and experimental data show that the beam transfers about 60% of its energy to the wake. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Commissioning and first measurements of the initial X-ray and γ-ray detectors at FACET-II

Authors: P. San Miguel Claveria, D. Storey, G. J. Cao, A. Di Piazza, H. Ekerfelt, S. Gessner, E. Gerstmayr, T. Grismayer, M. Hogan, C. Joshi, C. H. Keitel, A. Knetsch, M. Litos, A. Matheron, K. Marsh, S. Meuren, B. O'Shea, D. A. Reis, M. Tamburini, M. Vranic, J. Wang, V. Zakharova, C. Zhang, S. Corde

Abstract: The upgraded Facility for Advanced Accelerator Experimental Tests (FACET-II) at SLAC National Accelerator Laboratory has been designed to deliver ultra-relativistic electron and positron beams with unprecedented parameters, especially in terms of high peak current and low emittance. For most of the foreseen experimental campaigns hosted at this facility, the high energy radiation produced by these… ▽ More The upgraded Facility for Advanced Accelerator Experimental Tests (FACET-II) at SLAC National Accelerator Laboratory has been designed to deliver ultra-relativistic electron and positron beams with unprecedented parameters, especially in terms of high peak current and low emittance. For most of the foreseen experimental campaigns hosted at this facility, the high energy radiation produced by these beams at the Interaction Point will be a valuable diagnostic to assess the different physical processes under study. This article describes the X-ray and γ-ray detectors installed for the initial phase of FACET-II. Furthermore, experimental measurements obtained with these detectors during the first commissioning and user runs are presented and discussed, illustrating the working principles and potential applications of these detectors. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: Proceedings of the Advanced Accelerator Concepts (AAC) Workshop 2022

Journal ref: 2022 IEEE Advanced Accelerator Concepts Workshop (AAC), Long Island, NY, USA, 2022, pp. 1-6

Positron Acceleration in Plasma Wakefields

Authors: G. J. Cao, C. A. Lindstrøm, E. Adli, S. Corde, S. Gessner

Abstract: Plasma acceleration has emerged as a promising technology for future particle accelerators, particularly linear colliders. Significant progress has been made in recent decades toward high-efficiency and high-quality acceleration of electrons in plasmas. However, this progress does not generalize to acceleration of positrons, as plasmas are inherently charge asymmetric. Here, we present a comprehen… ▽ More Plasma acceleration has emerged as a promising technology for future particle accelerators, particularly linear colliders. Significant progress has been made in recent decades toward high-efficiency and high-quality acceleration of electrons in plasmas. However, this progress does not generalize to acceleration of positrons, as plasmas are inherently charge asymmetric. Here, we present a comprehensive review of historical and current efforts to accelerate positrons using plasma wakefields. Proposed schemes that aim to increase the energy efficiency and beam quality are summarised and quantitatively compared. A dimensionless metric that scales with the luminosity-per-beam power is introduced, indicating that positron-acceleration schemes are currently below the ultimate requirement for colliders. The primary issue is electron motion; the high mobility of plasma electrons compared to plasma ions, which leads to non-uniform accelerating and focusing fields that degrade the beam quality of the positron bunch, particularly for high efficiency acceleration. Finally, we discuss possible mitigation strategies and directions for future research. △ Less

Submitted 5 March, 2024; v1 submitted 19 September, 2023; originally announced September 2023.

Comments: 24 pages (30 pages with references), 22 figures

Observation of photoassociation resonances in ultracold atom-molecule collisions

Authors: Jin Cao, Bo-Yuan Wang, Huan Yang, Zhi-Jie Fan, Zhen Su, Jun Rui, Bo Zhao, Jian-Wei Pan

Abstract: Photoassociation of ultracold atoms is a resonant light-assisted collision process, in which two colliding atoms absorb a photon and form an excited molecule. Since the first observation about three decades ago, the photoassociation of ultracold atoms has made a significant impact on the study of ultracold atoms and molecules. Extending the photoassociation of atoms to the photoassociation of atom… ▽ More Photoassociation of ultracold atoms is a resonant light-assisted collision process, in which two colliding atoms absorb a photon and form an excited molecule. Since the first observation about three decades ago, the photoassociation of ultracold atoms has made a significant impact on the study of ultracold atoms and molecules. Extending the photoassociation of atoms to the photoassociation of atom-molecule pairs or molecule-molecule pairs will offer many new opportunities in the study of precision polyatomic molecular spectroscopy, formation of ultracold polyatomic molecules, and quantum control of molecular collisions and reactions. However, the high density of states and the photoexcitation of the collision complex by the trapping laser make photoassociation into well-defined quantum states of polyatomic molecules extremely difficult. Here we report on the observation of photoassociation resonances in ultracold collisions between $^{23}$Na$^{40}$K molecules and $^{40}$K atoms. We perform photoassociation in a long-wavelength optical dipole trap to form deeply bound triatomic molecules in the electronically excited states. The atom-molecule Feshbach resonance is used to enhance the free-bound Franck-Condon overlap. The photoassociation into well-defined quantum states of excited triatomic molecules is identified by observing resonantly enhanced loss features. These loss features depend on the polarization of the photoassociation lasers, allowing us to assign the rotational quantum numbers. The observation of ultracold atom-molecule photoassociation resonances paves the way toward preparing ground-state triatomic molecules, provides a new high-resolution spectroscopy technique for polyatomic molecules, and is also important to atom-molecule Feshbach resonances. △ Less

Submitted 29 July, 2023; originally announced July 2023.

Comments: 8 pages, 4 figures

Journal ref: Physical Review Letters 132, 093403 (2024)

Spatial-Temporal Data Mining for Ocean Science: Data, Methodologies, and Opportunities

Authors: Hanchen Yang, Wengen Li, Shuyu Wang, Hui Li, Jihong Guan, Shuigeng Zhou, Jiannong Cao

Abstract: With the rapid amassing of spatial-temporal (ST) ocean data, many spatial-temporal data mining (STDM) studies have been conducted to address various oceanic issues, including climate forecasting and disaster warning. Compared with typical ST data (e.g., traffic data), ST ocean data is more complicated but with unique characteristics, e.g., diverse regionality and high sparsity. These characteristi… ▽ More With the rapid amassing of spatial-temporal (ST) ocean data, many spatial-temporal data mining (STDM) studies have been conducted to address various oceanic issues, including climate forecasting and disaster warning. Compared with typical ST data (e.g., traffic data), ST ocean data is more complicated but with unique characteristics, e.g., diverse regionality and high sparsity. These characteristics make it difficult to design and train STDM models on ST ocean data. To the best of our knowledge, a comprehensive survey of existing studies remains missing in the literature, which hinders not only computer scientists from identifying the research issues in ocean data mining but also ocean scientists to apply advanced STDM techniques. In this paper, we provide a comprehensive survey of existing STDM studies for ocean science. Concretely, we first review the widely-used ST ocean datasets and highlight their unique characteristics. Then, typical ST ocean data quality enhancement techniques are explored. Next, we classify existing STDM studies in ocean science into four types of tasks, i.e., prediction, event detection, pattern mining, and anomaly detection, and elaborate on the techniques for these tasks. Finally, promising research opportunities are discussed. This survey can help scientists from both computer science and ocean science better understand the fundamental concepts, key techniques, and open challenges of STDM for ocean science. △ Less

Submitted 3 August, 2023; v1 submitted 20 July, 2023; originally announced July 2023.

Mathematical foundations of the non-Hermitian skin effect

Authors: Habib Ammari, Silvio Barandun, Jinghao Cao, Bryn Davies, Erik Orvehed Hiltunen

Abstract: We study the skin effect in a one-dimensional system of finitely many subwavelength resonators with a non-Hermitian imaginary gauge potential. Using Toeplitz matrix theory, we prove the condensation of bulk eigenmodes at one of the edges of the system. By introducing a generalised (complex) Brillouin zone, we can compute spectral bands of the associated infinitely periodic structure and prove that… ▽ More We study the skin effect in a one-dimensional system of finitely many subwavelength resonators with a non-Hermitian imaginary gauge potential. Using Toeplitz matrix theory, we prove the condensation of bulk eigenmodes at one of the edges of the system. By introducing a generalised (complex) Brillouin zone, we can compute spectral bands of the associated infinitely periodic structure and prove that this is the limit of the spectra of the finite structures with arbitrarily large size. Finally, we contrast the non-Hermitian systems with imaginary gauge potentials considered here with systems where the non-Hermiticity arises due to complex material parameters, showing that the two systems are fundamentally distinct. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Comments: 28 pages, 11 figures

MSC Class: 35B34; 35P25; 35C20; 81Q12

Localization and mobility edges in non-Hermitian disorder-free lattices

Authors: Rui Qi, Junpeng Cao, Xiang-Ping Jiang

Abstract: The non-Hermitian skin effect (NHSE) is a significant phenomenon observed in non-Hermitian systems under open boundary conditions, where the extensive bulk eigenstates tend to accumulate at the lattice edges. In this article, we investigate how an electric field affects the localization properties in a non-Hermitian mosaic Stark lattice, exploring the interplay between the Stark localization, mobi… ▽ More The non-Hermitian skin effect (NHSE) is a significant phenomenon observed in non-Hermitian systems under open boundary conditions, where the extensive bulk eigenstates tend to accumulate at the lattice edges. In this article, we investigate how an electric field affects the localization properties in a non-Hermitian mosaic Stark lattice, exploring the interplay between the Stark localization, mobility edge (ME), and the NHSE induced by nonreciprocity. We analytically obtain the Lyapunov exponent and the phase transition points as well as numerically calculate the density distributions and the spectral winding number. We reveal that in the nonreciprocal Stark lattice with the mosaic periodic parameter $κ=1$, there exists a critical electric field strength that describes the transition of the existence-nonexistence of NHSE and is inversely proportional to the lattice size. This transition is consistent with the real-complex transition and topological transition characterized by spectral winding number under periodic boundary conditions. In the strong fields, the Wannier-Stark ladder is recovered, and the Stark localization is sufficient to suppress the NHSE. When the mosaic period $κ=2$, we show that the system manifests an exact non-Hermitian ME and the skin states are still existing in the strong fields, in contrast to the gigantic field can restrain the NHSE in the $κ=1$ case. Moreover, we further study the expansion dynamics of an initially localized state and dynamically probe the existence of the NHSE and the non-Hermitian ME. These results could help us to control the NHSE and the non-Hermitian ME by using electric fields in the disorder-free systems. △ Less

Submitted 6 June, 2023; originally announced June 2023.