-
Upconversion of Phonon Modes into Microwave Photons in a Lithium Niobate Bulk Acoustic Wave Resonator Coupled to a Microwave Cavity
Authors:
S. Parashar,
W. M. Campbell,
J. Bourhill,
E. N. Ivanov,
M. Goryachev,
M. E. Tobar
Abstract:
The coupling between acoustic vibrations in a lithium niobate bulk acoustic wave resonator and microwave photons of a re-entrant microwave cavity was investigated at a temperature close to 4 K. Coupling was achieved by placing the acoustic resonator in the location of the re-entrant cavity electric field maxima, in a symmetric "split-post" configuration, with a large overlap between the microwave…
▽ More
The coupling between acoustic vibrations in a lithium niobate bulk acoustic wave resonator and microwave photons of a re-entrant microwave cavity was investigated at a temperature close to 4 K. Coupling was achieved by placing the acoustic resonator in the location of the re-entrant cavity electric field maxima, in a symmetric "split-post" configuration, with a large overlap between the microwave field and the acoustic mode, allowing acoustic modulations of the microwave frequency. We show that the acoustic modes in this setup retain large inherent quality factors of greater than $10^6$. A maximum optomechanical coupling rate was determined to be $g_0$ = 0.014 mHz, four orders of magnitude larger than previous results obtained using a quartz BAW at 4 K in a similar experimental setup, but using a single post-re-entrant cavity resonator.
△ Less
Submitted 7 November, 2024; v1 submitted 26 October, 2024;
originally announced October 2024.
-
Low Temperature Properties of Low-Loss Macroscopic Lithium Niobate Bulk Acoustic Wave Resonators
Authors:
William M. Campbell,
Leonardo Mariana,
Sonali Parashar,
Michael E. Tobar,
Maxim Goryachev
Abstract:
We investigate gram scale macroscopic bulk acoustic wave (BAW) resonators manufactured from plates of piezoelectric lithium niobate. The intrinsic competing loss mechanisms were studied at cryogenic temperature through precision measurements of various BAW modes. Exceptional quality factors were measured for the longitudinal BAW modes in the 1-100 MHz range, with a maximum quality factor of 8.9 mi…
▽ More
We investigate gram scale macroscopic bulk acoustic wave (BAW) resonators manufactured from plates of piezoelectric lithium niobate. The intrinsic competing loss mechanisms were studied at cryogenic temperature through precision measurements of various BAW modes. Exceptional quality factors were measured for the longitudinal BAW modes in the 1-100 MHz range, with a maximum quality factor of 8.9 million, corresponding to a quality factor $\times$ frequency product of 3.8 $\times 10^{14}$ Hz. Through measurements of the acoustic response to a strong drive tone, anomalous self induced absorption and transparency effects are observed. We show that such observations can be explained by microscopic impurities and defect sites in the crystal bulk by the use of a non linear model of acoustic dissipation. The losses associated with these defects provide the ultimate limit of resonator performance, which could be improved in the future if more pure samples were available.
△ Less
Submitted 4 February, 2025; v1 submitted 24 July, 2024;
originally announced July 2024.
-
Comparing Instrument Spectral Sensitivity of Dissimilar Electromagnetic Haloscopes to Axion Dark Matter and High Frequency Gravitational Waves
Authors:
Michael E. Tobar,
Catriona A. Thomson,
William M. Campbell,
Aaron Quiskamp,
Jeremy F. Bourhill,
Benjamin T. McAllister,
Eugene N. Ivanov,
Maxim Goryachev
Abstract:
It is known that haloscopes that search for dark matter axions via the axion-photon anomaly are also sensitive to gravitational radiation through the inverse Gertsenshtein effect. Recently this way of searching for high frequency gravitational waves has gained momentum as it has been shown that the strain sensitivities of such detectors are of the same order of sensitivity to the axion-photon thet…
▽ More
It is known that haloscopes that search for dark matter axions via the axion-photon anomaly are also sensitive to gravitational radiation through the inverse Gertsenshtein effect. Recently this way of searching for high frequency gravitational waves has gained momentum as it has been shown that the strain sensitivities of such detectors are of the same order of sensitivity to the axion-photon theta angle. Thus, after calculating the sensitivity of a haloscope to an axion signal, we also have calculated the order of magnitude sensitivity to a gravitational wave signal of the same spectral and temporal form. However, it is unlikely that a gravitational wave and an axion signal will be of the same form, since physically the way the signals are generated are completely different. For gravitational wave detection, the spectral strain sensitivity is in units strain per square root Hz, is the natural way to compare the sensitivity of gravitational wave detectors due to its independence on the gravitational wave signal. In this work, we introduce a systematic way to calculate the spectral sensitivity of an axion haloscope, so instrument comparison may be achieved independent of signal assumptions and only depends on the axion to signal transduction sensitivity and noise in the instrument. Thus, the calculation of the spectral sensitivity not only allows the comparison of dissimilar axion detectors independent of signal, but also allows us to compare the order of magnitude gravitational wave sensitivity in terms of spectral strain sensitivity, allowing comparisons to standard gravitational wave detectors based on optical interferometers and resonant-mass technology.
△ Less
Submitted 16 October, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Electro-Mechanical Tuning of High-Q Bulk Acoustic Phonon Modes at Cryogenic Temperatures
Authors:
William M. Campbell,
Serge Galliou,
Michael E. Tobar,
Maxim Goryachev
Abstract:
We investigate the electromechanical properties of quartz bulk acoustic wave resonators at extreme cryogenic temperatures. By applying a DC bias voltage, we demonstrate broad frequency tuning of high-Q phonon modes in a quartz bulk acoustic wave cavity at cryogenic temperatures of 4 K and 20 mK. More than 100 line-widths of tuning of the resonance peak without any degradation in loaded quality fac…
▽ More
We investigate the electromechanical properties of quartz bulk acoustic wave resonators at extreme cryogenic temperatures. By applying a DC bias voltage, we demonstrate broad frequency tuning of high-Q phonon modes in a quartz bulk acoustic wave cavity at cryogenic temperatures of 4 K and 20 mK. More than 100 line-widths of tuning of the resonance peak without any degradation in loaded quality factor, which are as high as $1.73\times 10^9$, is seen for high order overtone modes. For all modes and temperatures the observed coefficient of frequency tuning is $\approx$ 3.5 mHz/V per overtone number $n$ corresponding to a maximum of 255.5 mHz/V for the $n = 73$ overtone mode. No degradation in the quality factor is observed for any value of applied biasing field.
△ Less
Submitted 19 October, 2022; v1 submitted 3 July, 2022;
originally announced July 2022.
-
Rare Events Detected with a Bulk Acoustic Wave High Frequency Gravitational Wave Antenna
Authors:
Maxim Goryachev,
William M. Campbell,
Ik Siong Heng,
Serge Galliou,
Eugene N. Ivanov,
Michael E. Tobar
Abstract:
This work describes the operation of a High Frequency Gravitational Wave detector based on a cryogenic Bulk Acoustic Wave (BAW) cavity and reports observation of rare events during 153 days of operation over two seperate experimental runs (Run 1 and Run 2). In both Run 1 and Run 2 two modes were simultaneously monitored. Across both runs, the 3rd overtone of the fast shear mode (3B) operating at 5…
▽ More
This work describes the operation of a High Frequency Gravitational Wave detector based on a cryogenic Bulk Acoustic Wave (BAW) cavity and reports observation of rare events during 153 days of operation over two seperate experimental runs (Run 1 and Run 2). In both Run 1 and Run 2 two modes were simultaneously monitored. Across both runs, the 3rd overtone of the fast shear mode (3B) operating at 5.506 MHz was monitored, while in Run 1 the second mode was chosen to be the 5th OT of the slow shear mode (5C) operating at 8.392 MHz. However, in Run 2 the second mode was selected to be closer in frequency to the first mode, and chosen to be the 3rd overtone of the slow shear mode (3C) operating at 4.993 MHz. Two strong events were observed as transients responding to energy deposition within acoustic modes of the cavity. The first event occurred during Run 1 on the 12/05/2019 (UTC), and was observed in the 5.506 MHz mode, while the second mode at 8.392 MHz observed no event. During Run 2, a second event occurred on the 27/11/2019(UTC) and was observed by both modes. Timing of the events were checked against available environmental observations as well as data from other detectors. Various possibilities explaining the origins of the events are discussed.
△ Less
Submitted 22 July, 2021; v1 submitted 11 February, 2021;
originally announced February 2021.
-
Searching for Scalar Dark Matter via Coupling to Fundamental Constants with Photonic, Atomic and Mechanical Oscillators
Authors:
William M. Campbell,
Ben T. McAllister,
Maxim Goryachev,
Eugene N. Ivanov,
Michael E. Tobar
Abstract:
We present a way to search for light scalar dark matter (DM), seeking to exploit putative coupling between dark matter scalar fields and fundamental constants, by searching for frequency modulations in direct comparisons between frequency stable oscillators. Specifically we compare a Cryogenic Sapphire Oscillator (CSO), Hydrogen Maser (HM) atomic oscillator and a bulk acoustic wave quartz oscillat…
▽ More
We present a way to search for light scalar dark matter (DM), seeking to exploit putative coupling between dark matter scalar fields and fundamental constants, by searching for frequency modulations in direct comparisons between frequency stable oscillators. Specifically we compare a Cryogenic Sapphire Oscillator (CSO), Hydrogen Maser (HM) atomic oscillator and a bulk acoustic wave quartz oscillator (OCXO). This work includes the first calculation of the dependence of acoustic oscillators on variations of the fundamental constants, and demonstration that they can be a sensitive tool for scalar DM experiments. Results are presented based on 16 days of data in comparisons between the HM and OCXO, and 2 days of comparison between the OCXO and CSO. No evidence of oscillating fundamental constants consistent with a coupling to scalar dark matter is found, and instead limits on the strength of these couplings as a function of the dark matter mass are determined. We constrain the dimensionless coupling constant $d_e$ and combination $|d_{m_e}-d_g|$ across the mass band $4.4\times10^{-19}\lesssim m_\varphi \lesssim 6.8\times10^{-14}\:\text{eV} c^{-2}$, with most sensitive limits $d_e\gtrsim1.59\times10^{-1}$, $|d_{m_e}-dg|\gtrsim6.97\times10^{-1}$. Notably, these limits do not rely on Maximum Reach Analysis (MRA), instead employing the more general coefficient separation technique. This experiment paves the way for future, highly sensitive experiments based on state-of-the-art acoustic oscillators, and we show that these limits can be competitive with the best current MRA-based exclusion limits.
△ Less
Submitted 15 April, 2021; v1 submitted 15 October, 2020;
originally announced October 2020.
-
Model Selection Framework for Graph-based data
Authors:
Rajmonda S. Caceres,
Leah Weiner,
Matthew C. Schmidt,
Benjamin A. Miller,
William M. Campbell
Abstract:
Graphs are powerful abstractions for capturing complex relationships in diverse application settings. An active area of research focuses on theoretical models that define the generative mechanism of a graph. Yet given the complexity and inherent noise in real datasets, it is still very challenging to identify the best model for a given observed graph. We discuss a framework for graph model selecti…
▽ More
Graphs are powerful abstractions for capturing complex relationships in diverse application settings. An active area of research focuses on theoretical models that define the generative mechanism of a graph. Yet given the complexity and inherent noise in real datasets, it is still very challenging to identify the best model for a given observed graph. We discuss a framework for graph model selection that leverages a long list of graph topological properties and a random forest classifier to learn and classify different graph instances. We fully characterize the discriminative power of our approach as we sweep through the parameter space of two generative models, the Erdos-Renyi and the stochastic block model. We show that our approach gets very close to known theoretical bounds and we provide insight on which topological features play a critical discriminating role.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Matching Community Structure Across Online Social Networks
Authors:
Lin Li,
W. M. Campbell
Abstract:
The discovery of community structure in networks is a problem of considerable interest in recent years. In online social networks, often times, users are simultaneously involved in multiple social media sites, some of which share common social relationships. It is of great interest to uncover a shared community structure across these networks. However, in reality, users typically identify themselv…
▽ More
The discovery of community structure in networks is a problem of considerable interest in recent years. In online social networks, often times, users are simultaneously involved in multiple social media sites, some of which share common social relationships. It is of great interest to uncover a shared community structure across these networks. However, in reality, users typically identify themselves with different usernames across social media sites. This creates a great difficulty in detecting the community structure. In this paper, we explore several approaches for community detection across online social networks with limited knowledge of username alignment across the networks. We refer to the known alignment of usernames as seeds. We investigate strategies for seed selection and its impact on networks with a different fraction of overlapping vertices. The goal is to study the interplay between network topologies and seed selection strategies, and to understand how it affects the detected community structure. We also propose several measures to assess the performance of community detection and use them to measure the quality of the detected communities in both Twitter-Twitter networks and Twitter-Instagram networks.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
