Showing 1–36 of 36 results for author: Campbell, K

Efficient production of sodium Bose-Einstein condensates in a hybrid trap

Authors: Yanda Geng, Shouvik Mukherjee, Swarnav Banik, Monica Gutierrez Galan, Madison J. Anderson, Hector Sosa-Martinez, Stephen P. Eckel, Ian B. Spielman, Gretchen K. Campbell

Abstract: We describe an apparatus that efficiently produces $^{23}$Na Bose-Einstein condensates (BECs) in a hybrid trap that combines a quadrupole magnetic field with a far-detuned optical dipole trap. Using a Bayesian optimization framework, we systematically optimize all BEC production parameters in modest sized batches of highly correlated parameters. Furthermore, we introduce a Lagrange multiplier-base… ▽ More We describe an apparatus that efficiently produces $^{23}$Na Bose-Einstein condensates (BECs) in a hybrid trap that combines a quadrupole magnetic field with a far-detuned optical dipole trap. Using a Bayesian optimization framework, we systematically optimize all BEC production parameters in modest sized batches of highly correlated parameters. Furthermore, we introduce a Lagrange multiplier-based technique to optimize the duration of different evaporation stages constrained to have a fixed total duration; this enables the progressive creation of increasingly rapid experimental sequences that still generate high quality BECs. Taken together, our techniques constitute a general approach for refining and accelerating sequence-based experimental protocols. △ Less

Submitted 27 May, 2025; originally announced May 2025.

Comments: 10 pages, 6 figures

The Rayleigh-Taylor instability in a binary quantum fluid

Authors: Yanda Geng, Junheng Tao, Mingshu Zhao, Shouvik Mukherjee, Stephen Eckel, Gretchen K. Campbell, Ian B. Spielman

Abstract: Instabilities, where small fluctuations seed the formation of large-scale structures, govern dynamics in a variety of fluid systems. The Rayleigh-Taylor instability (RTI), present from tabletop to astronomical scales, is an iconic example characterized by mushroom-shaped incursions appearing when immiscible fluids are forced together. Despite its ubiquity, RTI experiments are challenging; here, we… ▽ More Instabilities, where small fluctuations seed the formation of large-scale structures, govern dynamics in a variety of fluid systems. The Rayleigh-Taylor instability (RTI), present from tabletop to astronomical scales, is an iconic example characterized by mushroom-shaped incursions appearing when immiscible fluids are forced together. Despite its ubiquity, RTI experiments are challenging; here, we report the observation of the RTI in an immiscible binary superfluid consisting of a two-component Bose-Einstein condensate. We force these components together to initiate the instability, and observe the growth of mushroom-like structures. The interface can also be stabilized, allowing us to spectroscopically measure the "ripplon" interface modes. Lastly, we use matter-wave interferometry to transform the superfluid velocity field at the interface into a vortex chain. These results-in agreement with our theory-demonstrate the close connection between the RTI in classical and quantum fluids. △ Less

Submitted 29 November, 2024; originally announced November 2024.

Comments: 10 pages (including SM), 4 figures + 3 figures in SM

Zeptonewton and Attotesla per Centimeter Metrology With Coupled Oscillators

Authors: Ian Bouche, Josh Javor, Abhishek Som, David K. Campbell, David J. Bishop

Abstract: We present the coupled oscillator: a new mechanism for signal amplification with widespread application in metrology. We introduce the mechanical theory of this framework, and support it by way of simulations. We present a particular implementation of coupled oscillators: a microelectromechanical system (MEMS) that uses one large (~100mm) N52 magnet coupled magnetically to a small (~0.25mm), oscil… ▽ More We present the coupled oscillator: a new mechanism for signal amplification with widespread application in metrology. We introduce the mechanical theory of this framework, and support it by way of simulations. We present a particular implementation of coupled oscillators: a microelectromechanical system (MEMS) that uses one large (~100mm) N52 magnet coupled magnetically to a small (~0.25mm), oscillating N52 magnet, providing a force resolution of 200zN measured over 1s in a noiseless environment. We show that the same system is able to resolve magnetic gradients of 130aT/cm at a single point (within 500um). This technology therefore has the potential to revolutionize force and magnetic gradient sensing, including high-impact areas such cardiac and brain imaging. △ Less

Submitted 22 May, 2024; v1 submitted 22 February, 2024; originally announced February 2024.

Comments: 13 pages, 17 figures

A Four-channel Optically Pumped Magnetometer for a Magnetoencephalography Sensor Array

Authors: Joonas Iivanainen, Tony R. Carter, Jonathan E. Dhombridge, Timothy S. Read, Kaleb Campbell, Quinn Abate, David M. Ridley, Amir Borna, Peter D. D. Schwindt

Abstract: We present a novel four-channel OPM sensor for magnetoencephalography that utilizes a two-color pump/probe scheme on a single optical axis. We characterize its performance across 18 built sensor modules. The new sensor implements several improvements over our previously developed sensor including lower vapor-cell operating temperature, improved probe-light detection optics, and reduced optical pow… ▽ More We present a novel four-channel OPM sensor for magnetoencephalography that utilizes a two-color pump/probe scheme on a single optical axis. We characterize its performance across 18 built sensor modules. The new sensor implements several improvements over our previously developed sensor including lower vapor-cell operating temperature, improved probe-light detection optics, and reduced optical power requirements. The sensor also has new electromagnetic field coils on the sensor head which are designed using stream-function-based current optimization. We detail the coil design methodology and present experimental characterization of the coil performance. The magnetic sensitivity of the sensor is on average 12.3 fT/rt-Hz across the 18 modules while the average gradiometrically inferred sensitivity is about 6.0 fT/rt-Hz. The sensor 3-dB bandwidth is 100 Hz on average. The on-sensor coil performance is in good agreement with the simulations. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Grating magneto-optical traps with complicated level structures

Authors: D. S. Barker, P. K. Elgee, A. Sitaram, E. B. Norrgard, N. N. Klimov, G. K. Campbell, S. Eckel

Abstract: We study the forces and optical pumping within grating magneto-optical traps (MOTs) operating on transitions with non-trivial level structure. In contrast to the standard six-beam MOT configuration, rate equation modelling predicts that the asymmetric laser geometry of a grating MOT will produce spin-polarized atomic samples. Furthermore, the Landé $g$-factors and total angular momenta of the trap… ▽ More We study the forces and optical pumping within grating magneto-optical traps (MOTs) operating on transitions with non-trivial level structure. In contrast to the standard six-beam MOT configuration, rate equation modelling predicts that the asymmetric laser geometry of a grating MOT will produce spin-polarized atomic samples. Furthermore, the Landé $g$-factors and total angular momenta of the trapping transition strongly influence both the confinement and equilibrium position of the trap. Using the intuition gained from the rate equation model, we realize a grating MOT of fermionic $^{87}$Sr and observe that it forms closer to the center of the trap's quadrupole magnetic field than its bosonic counterpart. We also explore the application of grating MOTs to molecule laser cooling, where the rate equations suggest that dual-frequency operation is necessary, but not sufficient, for stable confinement for type-II level structures. To test our molecule laser cooling models, we create grating MOTs using the $D_1$ line of $^7$Li and see that only two of the four possible six-beam polarization configurations operate in the grating geometry. Our results will aid the development of portable atom and molecule traps for time keeping, inertial navigation, and precision measurement. △ Less

Submitted 7 September, 2023; v1 submitted 12 May, 2023; originally announced May 2023.

Comments: 33 pages, 18 figures

Intrinsic Pulsed Magnetic Gradiometer in Earth's Field

Authors: Kaleb Campbell, Ying-Ju Wang, Igor Savukov, Peter Schwindt, Yuan-Yu Jau, Vishal Shah

Abstract: We describe a novel pulsed magnetic gradiometer based on the optical interference of sidebands generated using two spatially separated alkali vapor cells. The sidebands are produced with high efficiency using parametric frequency conversion of a probe beam interacting with $^{87}$Rb atoms in a coherent superposition of magnetically sensitive hyperfine ground states. Interference between the sideba… ▽ More We describe a novel pulsed magnetic gradiometer based on the optical interference of sidebands generated using two spatially separated alkali vapor cells. The sidebands are produced with high efficiency using parametric frequency conversion of a probe beam interacting with $^{87}$Rb atoms in a coherent superposition of magnetically sensitive hyperfine ground states. Interference between the sidebands generates a low-frequency beat note whose frequency is determined by the magnetic field gradient between the two vapor cells. In contrast to traditional magnetic gradiometers, our approach provides a direct readout of the gradient field without the intermediate step of subtracting the outputs of two spacially separated magnetometers. The technique is expected to provide effective common-mode magnetic field cancellation at frequencies far greater than the bandwidth of the gradiometer. Using this technique, we developed a compact magnetic gradiometer sensor head with integrated optics with a sensitivity of $25 \ fT/cm/\sqrt{Hz}$ with a $4.4$ cm baseline, while operating in a noisy laboratory environment unshielded from Earth's field. We also outline a theoretical framework that accurately models sideband generation using a density matrix formalism. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Comments: 16 Pages

Dynamical symmetry breaking through AI: The dimer self-trapping transition

Authors: G. P. Tsironis, G. D. Barmparis, D. K. Campbell

Abstract: The nonlinear dimer obtained through the nonlinear Schr{ö}dinger equation has been a workhorse for the discovery the role nonlinearity plays in strongly interacting systems. While the analysis of the stationary states demonstrates the onset of a symmetry broken state for some degree of nonlinearity, the full dynamics maps the system into an effective $φ^4$ model. In this latter context, the self-t… ▽ More The nonlinear dimer obtained through the nonlinear Schr{ö}dinger equation has been a workhorse for the discovery the role nonlinearity plays in strongly interacting systems. While the analysis of the stationary states demonstrates the onset of a symmetry broken state for some degree of nonlinearity, the full dynamics maps the system into an effective $φ^4$ model. In this latter context, the self-trapping transition is an initial condition dependent transfer of a classical particle over a barrier set by the nonlinear term. This transition has been investigated analytically and mathematically it is expressed through the hyperbolic limit of Jacobian elliptic functions. The aim of the present work is to recapture this transition through the use of methods of Artificial Intelligence (AI). Specifically, we used a physics motivated machine learning model that is shown to be able to capture the original dynamic self-trapping transition and its dependence on initial conditions. Exploitation of this result in the case of the non-degenerate nonlinear dimer gives additional information on the more general dynamics and helps delineate linear from nonlinear localization. This work shows how AI methods may be embedded in physics and provide useful tools for discovery. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Impact of virtual REU experiences on students' psychosocial gains during the COVID-19 pandemic

Authors: Dina Zohrabi Alaee, Micah K. Campbell, Benjamin M. Zwickl

Abstract: In the Summer of 2020, due to COVID-19, institutions either canceled or remotely hosted their Research Experience for Undergraduates (REU) programs. We carried out a 16-week longitudinal study examining the impact of these fully remote research experiences on mentees' psychosocial gains (e.g., identity). We studied the phenomenon of a remote research experience from the standpoint of the mentees (… ▽ More In the Summer of 2020, due to COVID-19, institutions either canceled or remotely hosted their Research Experience for Undergraduates (REU) programs. We carried out a 16-week longitudinal study examining the impact of these fully remote research experiences on mentees' psychosocial gains (e.g., identity). We studied the phenomenon of a remote research experience from the standpoint of the mentees ($N$=10) and their mentors ($N$=8), who were each interviewed seven and three times, respectively (94 total interviews). All mentees reported that this experience was highly beneficial through different factors and that they developed a sense of belonging, self-efficacy, and identity despite working remotely. Then, we synthesize these results with prior literature and develop a framework showing how different experiences and constructs affect the development of the physics and researcher identity. Gaining greater understanding regarding factors leading to the growth of psychosocial gains may help REU coordinators and REU mentors to re-design their undergraduate research program and provide the support that their mentees' needed to have a positive undergraduate research experience. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Analysis of a Casimir-driven Parametric Amplifier with Resilience to Casimir Pull-in for MEMS Single-Point Magnetic Gradiometry

Authors: Josh Javor, Zhancheng Yao, Matthias Imboden, David K. Campbell, David J. Bishop

Abstract: The Casimir Force, a quantum mechanical effect, has been observed in several microelectromechanical systems (MEMS) platforms. Due to its extreme sensitivity to the separation of two objects, the Casimir Force has been proposed as an excellent avenue for quantum metrology. Practical application, however, is challenging due to attractive forces leading to stiction and failure of the device, called C… ▽ More The Casimir Force, a quantum mechanical effect, has been observed in several microelectromechanical systems (MEMS) platforms. Due to its extreme sensitivity to the separation of two objects, the Casimir Force has been proposed as an excellent avenue for quantum metrology. Practical application, however, is challenging due to attractive forces leading to stiction and failure of the device, called Casimir pull-in. In this work, we design and simulate a Casimir-driven metrology platform, where a time-delay based parametric amplification technique is developed to achieve a steady state and avoid pull-in. We apply the design to the detection of weak, low frequency, gradient magnetic fields, similar to those emanating from ionic currents in the heart and brain. Simulation parameters are selected from recent experimental platforms developed for Casimir metrology and magnetic gradiometry, both on MEMS platforms. While MEMS offer many advantages to such an application, the detected signal must typically be at the resonant frequency of the device, with diminished sensitivity in the low frequency regime of biomagnetic fields. Using a Casimir-drive parametric amplifier, we report a 10,000 fold improvement in the best-case resolution of MEMS single-point gradiometers, with a maximum sensitivity of 6 Hz/(pT/cm) at 1 Hz. The development of the proposed design has the potential to revolutionize metrology, and specifically may enable unshielded monitoring of biomagnetic fields in ambient conditions. △ Less

Submitted 23 June, 2021; originally announced June 2021.

Programmable System on Chip for controlling an atomic physics experiment

Authors: A. Sitaram, G. K. Campbell, A. Restelli

Abstract: Most atomic physics experiments are controlled by a digital pattern generator used to synchronize all equipment by providing triggers and clocks. Recently, the availability of well-documented open-source development tools has lifted the barriers to using programmable systems on chip (PSoC), making them a convenient and versatile tool for synthesizing digital patterns. Here, we take advantage of th… ▽ More Most atomic physics experiments are controlled by a digital pattern generator used to synchronize all equipment by providing triggers and clocks. Recently, the availability of well-documented open-source development tools has lifted the barriers to using programmable systems on chip (PSoC), making them a convenient and versatile tool for synthesizing digital patterns. Here, we take advantage of these advancements in the design of a versatile clock and pattern generator using a PSoC. We present our design with the intent of highlighting the new possibilities that PSoCs have to offer in terms of flexibility. We provide a robust hardware carrier and basic firmware implementation that can be expanded and modified for other uses. △ Less

Submitted 13 April, 2021; v1 submitted 22 February, 2021; originally announced February 2021.

Confinement of an alkaline-earth element in a grating magneto-optical trap

Authors: A. Sitaram, P. K. Elgee, G. K. Campbell, N. N. Klimov, S. Eckel, D. S. Barker

Abstract: We demonstrate a compact magneto-optical trap (MOT) of alkaline-earth atoms using a nanofabricated diffraction grating chip. A single input laser beam, resonant with the broad $^1$S$_0\,\rightarrow \,^1$P$_1$ transition of strontium, forms the MOT in combination with three diffracted beams from the grating chip and a magnetic field produced by permanent magnets. A differential pumping tube limits… ▽ More We demonstrate a compact magneto-optical trap (MOT) of alkaline-earth atoms using a nanofabricated diffraction grating chip. A single input laser beam, resonant with the broad $^1$S$_0\,\rightarrow \,^1$P$_1$ transition of strontium, forms the MOT in combination with three diffracted beams from the grating chip and a magnetic field produced by permanent magnets. A differential pumping tube limits the effect of the heated, effusive source on the background pressure in the trapping region. The system has a total volume of around 2.4 L. With our setup, we have trapped up to $5 \times 10^6$ $^{88}$Sr atoms, at a temperature of approximately $6$ mK, and with a trap lifetime of approximately 1 s. Our results will aid the effort to miniaturize optical atomic clocks and other quantum technologies based on alkaline-earth atoms. △ Less

Submitted 9 June, 2020; originally announced June 2020.

Comments: 6 pages, 6 figures

Searching for the Casimir Energy

Authors: Diego Pérez-Morelo, Alexander Stange, Richard W. Lally, Lawrence K. Barrett, Matthias Imboden, David K. Campbell, Vladimir A. Aksyuk, David J. Bishop

Abstract: In this article, we present a nano-electromechanical system (NEMS) designed to detect changes in the Casimir Energy. The Casimir effect is a result of the appearance of quantum fluctuations in the electromagnetic vacuum. Previous experiments have used nano- or micro- scale parallel plate capacitors to detect the Casimir force by measuring the small attractive force these fluctuations exert between… ▽ More In this article, we present a nano-electromechanical system (NEMS) designed to detect changes in the Casimir Energy. The Casimir effect is a result of the appearance of quantum fluctuations in the electromagnetic vacuum. Previous experiments have used nano- or micro- scale parallel plate capacitors to detect the Casimir force by measuring the small attractive force these fluctuations exert between the two surfaces. In this new set of experiments, we aim to directly detect shifts in the Casimir $\textit{energy}$ in the vacuum due to the presence of metallic parallel plates, one of which is a superconductor. A change in the Casimir energy of this configuration is predicted to shift the superconducting transition temperature (T$_\textrm{c}$) because of an interaction between it and the superconducting condensation energy. The experiment we discuss consists of taking a superconducting film, carefully measuring its transition temperature, bringing a conducting plate close to the film, creating a Casimir cavity, and then measuring the transition temperature again. The expected shifts will be small, comparable to the normal shifts one sees in cycling superconducting films to cryogenic temperatures and so using a NEMS resonator and doing this in situ is the only practical way to obtain accurate, reproducible data. Using a thin Pb film and opposing Au surface, we observe no shift in T$_\textrm{c}$ greater than 12 $μ$K down to a minimum spacing of approximately 70 nm. △ Less

Submitted 28 April, 2020; originally announced April 2020.

Journal ref: Microsystems & Nanoengineering volume 6, Article number: 115 (2020)

A flexible, open-source radio-frequency driver for acousto-optic and electro-optic devices

Authors: D. S. Barker, N. C. Pisenti, A. Restelli, J. Scherschligt, J. A. Fedchak, G. K. Campbell, S. Eckel

Abstract: We present a design for a radio-frequency driver that leverages telecom amplifiers to achieve high power output and wide bandwidth. The design consists of two compact printed circuit boards (total area $< 255$ cm), which incorporate power (turn-on) and thermal management to prevent accidental damage to the amplifier circuitry. Our driver provides $>1$ W of output power over a $10$ MHz to $1.1$ GHz… ▽ More We present a design for a radio-frequency driver that leverages telecom amplifiers to achieve high power output and wide bandwidth. The design consists of two compact printed circuit boards (total area $< 255$ cm), which incorporate power (turn-on) and thermal management to prevent accidental damage to the amplifier circuitry. Our driver provides $>1$ W of output power over a $10$ MHz to $1.1$ GHz frequency range, and $\geq 5$ W from $20$ MHz to $100$ MHz. The driver circuit includes auxiliary components for analog frequency and amplitude modulation ($\approx 70$ kHz bandwidth), as well as digital power switching ($> 30$ dB of extinction within $40$ ns and final extinction $> 90$ dB). The radio-frequency source can also be digitally switched between an external input and an integrated voltage-controlled oscillator. Our design is motivated by the need for flexible, inexpensive drivers of optically active devices, such as acousto-optic and electro-optic modulators. △ Less

Submitted 6 August, 2019; originally announced August 2019.

Comments: 8 pages, 7 figures

Isotope-shift spectroscopy of the ${^1}S_0 \rightarrow {^3}P_1$ and ${^1}S_0 \rightarrow {^3}P_0$ transitions in strontium

Authors: Hirokazu Miyake, Neal C. Pisenti, Peter K. Elgee, Ananya Sitaram, Gretchen K. Campbell

Abstract: Isotope shift spectroscopy with narrow optical transitions provides a benchmark for atomic structure calculations and has also been proposed as a way to constrain theories predicting physics beyond the Standard Model. Here, we have measured frequency shifts of the ${^1}S_0 \rightarrow {^3}P_1$ and ${^1}S_0 \rightarrow {^3}P_0$ transitions between all stable isotopes of strontium relative to… ▽ More Isotope shift spectroscopy with narrow optical transitions provides a benchmark for atomic structure calculations and has also been proposed as a way to constrain theories predicting physics beyond the Standard Model. Here, we have measured frequency shifts of the ${^1}S_0 \rightarrow {^3}P_1$ and ${^1}S_0 \rightarrow {^3}P_0$ transitions between all stable isotopes of strontium relative to ${^{88}}$Sr. This includes the first reported measurements of the ${^1}S_0 \rightarrow {^3}P_0$ isotope shift of ${^{88}}$Sr-${^{86}}$Sr and ${^{88}}$Sr-${^{84}}$Sr. Using the isotope shift measurements of the two transitions, a King plot analysis is performed. These results, combined with other recent isotope shift measurements in other atomic systems, will help refine atomic structure calculations and theoretical predictions for new physics. △ Less

Submitted 19 November, 2019; v1 submitted 15 July, 2019; originally announced July 2019.

Comments: 9 pages, 4 figures, 3 tables

Journal ref: Phys. Rev. Research 1, 033113 (2019)

Open-Source Matlab-Based Graphical User Interface (GUI) For Computer Control of Microscopes Using Micro-Manager

Authors: Quang Long Pham, David Chege, Timothy Dijamco, Migle Surblyte, Akshay Naik, Kolawole Campbell, Nhat-Anh-Nguyen Tong, Roman Voronov

Abstract: Live time-lapse microscopy is essential for a wide range of biological applications. Software-based automation is the gold standard for the operation of hardware accessories necessary for image acquisition. Given that current software packages are neither affordable nor open to complex structured programming, we have developed a Matlab-based graphical user interface (GUI) that is fundamentally acc… ▽ More Live time-lapse microscopy is essential for a wide range of biological applications. Software-based automation is the gold standard for the operation of hardware accessories necessary for image acquisition. Given that current software packages are neither affordable nor open to complex structured programming, we have developed a Matlab-based graphical user interface (GUI) that is fundamentally accessible while providing limitless avenues for further customization. The GUI simultaneously communicates with the open-source, cross-functional platform micro-Manager for controlling hardware for time-lapse image acquisition and with other software for image processing. The use of the GUI is demonstrated through an 18-hour cell migration experiment. The results suggest that the GUI can generate high-quality, high-throughput time-lapse images. The core code behind the GUI is open-source so that it can be modified and upgraded. Therefore, it benefits the researchers worldwide by providing them a fundamental yet functional template to add in advanced features specific to their needs, such as additional non-microscopy hardware parts and software packages supported by the Matlab software. △ Less

Submitted 18 June, 2019; v1 submitted 26 April, 2019; originally announced April 2019.

Comments: 21 pages, 5 figures

Narrow-line photoassociation spectroscopy and mass-scaling of bosonic strontium

Authors: B. J. Reschovsky, B. P. Ruzic, H. Miyake, N. C. Pisenti, P. S. Julienne, G. K. Campbell

Abstract: Using new experimental measurements of photoassociation resonances near the $^1\mathrm{S}_0 \rightarrow \phantom{ }^3\mathrm{P}_1$ intercombination transition in $^{84}$Sr and $^{86}$Sr, we present an updated study into the mass-scaling behavior of bosonic strontium dimers. A previous mass-scaling model [Borkowski et al., Phys. Rev. A 90, 032713 (2014)] was able to incorporate a large number of ph… ▽ More Using new experimental measurements of photoassociation resonances near the $^1\mathrm{S}_0 \rightarrow \phantom{ }^3\mathrm{P}_1$ intercombination transition in $^{84}$Sr and $^{86}$Sr, we present an updated study into the mass-scaling behavior of bosonic strontium dimers. A previous mass-scaling model [Borkowski et al., Phys. Rev. A 90, 032713 (2014)] was able to incorporate a large number of photoassociation resonances for $^{88}$Sr, but at the time only a handful of resonances close to the dissociation limit were known for $^{84}$Sr and $^{86}$Sr. In this work, we perform a more thorough measurement of $^{84}$Sr and $^{86}$Sr bound states, identifying multiple new resonances at deeper binding energies out to $E/h=-5$ GHz. We also identify several previously measured resonances that cannot be experimentally reproduced and provide alternative binding energies instead. With this improved spectrum, we develop a mass-scaled model that reproduces the observed binding energies of $^{86}$Sr and $^{88}$Sr to within 1 MHz. In order to accurately reproduce the deeper bound states, our model includes a second $1_u$ channel and more faithfully reproduces the depth of the potential. As determined by the previous mass-scaling study, $^{84}$Sr $0_u^+$ levels are strongly perturbed by the avoided crossing between the $^1\mathrm{S}_0 + \phantom{ }^3\mathrm{P}_1$ $0_u^+$ $(^3Π_u)$ and $^1\mathrm{S}_0 + \phantom{ }^1\mathrm{D}_2$ $0_u^+$ $(^1Σ_u^+)$ potential curves and therefore are not included in this mass-scaled model, but are accurately reproduced using an isotope-specific model with slightly different quantum defect parameters. In addition, the optical lengths of the $^{84}$Sr $0_u^+,\ ν=-2$ to $ν=-5$ states are measured and compared to numerical estimates to characterize their use as optical Feshbach resonances. △ Less

Submitted 23 October, 2018; v1 submitted 20 August, 2018; originally announced August 2018.

Comments: Corrected typo in metadata 9 pages, 3 figures

Accelerated search and design of stretchable graphene kirigami using machine learning

Authors: Paul Z. Hanakata, Ekin D. Cubuk, David K. Campbell, Harold S. Park

Abstract: Making kirigami-inspired cuts into a sheet has been shown to be an effective way of designing stretchable materials with metamorphic properties where the 2D shape can transform into complex 3D shapes. However, finding the optimal solutions is not straightforward as the number of possible cutting patterns grows exponentially with system size. Here, we report on how machine learning (ML) can be used… ▽ More Making kirigami-inspired cuts into a sheet has been shown to be an effective way of designing stretchable materials with metamorphic properties where the 2D shape can transform into complex 3D shapes. However, finding the optimal solutions is not straightforward as the number of possible cutting patterns grows exponentially with system size. Here, we report on how machine learning (ML) can be used to approximate the target properties, such as yield stress and yield strain, as a function of cutting pattern. Our approach enables the rapid discovery of kirigami designs that yield extreme stretchability as verified by molecular dynamics (MD) simulations. We find that convolutional neural networks (CNN), commonly used for classification in vision tasks, can be applied for regression to achieve an accuracy close to the precision of the MD simulations. This approach can then be used to search for optimal designs that maximize elastic stretchability with only 1000 training samples in a large design space of $\sim 4\times10^6$ candidate designs. This example demonstrates the power and potential of ML in finding optimal kirigami designs at a fraction of iterations that would be required of a purely MD or experiment-based approach, where no prior knowledge of the governing physics is known or available. △ Less

Submitted 18 August, 2018; originally announced August 2018.

Journal ref: Phys. Rev. Lett. 121, 255304 (2018)

An ultra-low noise, high-voltage piezo driver

Authors: N. C. Pisenti, A. Restelli, B. J. Reschovsky, D. S. Barker, G. K. Campbell

Abstract: We present an ultra-low noise, high-voltage driver suited for use with piezoelectric actuators and other low-current applications. The architecture uses a flyback switching regulator to generate up to 250V in our current design, with an output of 1 kV or more possible with small modifications. A high slew-rate op-amp suppresses the residual switching noise, yielding a total RMS noise of… ▽ More We present an ultra-low noise, high-voltage driver suited for use with piezoelectric actuators and other low-current applications. The architecture uses a flyback switching regulator to generate up to 250V in our current design, with an output of 1 kV or more possible with small modifications. A high slew-rate op-amp suppresses the residual switching noise, yielding a total RMS noise of $\approx 100μ$V (1 Hz--100 kHz). A low-voltage ($\pm 10$V), high bandwidth signal can be summed with unity gain directly onto the output, making the driver well-suited for closed-loop feedback applications. Digital control enables both repeatable setpoints and sophisticated control logic, and the circuit consumes less than 150mA at $\pm 15$V. △ Less

Submitted 11 December, 2016; v1 submitted 12 September, 2016; originally announced September 2016.

Journal ref: Rev. Sci. Instrum. 87, 124702 (2016)

Temperature induced decay of persistent currents in a superfluid ultracold gas

Authors: Avinash Kumar, Stephen Eckel, Fred Jendrzejewski, Gretchen K. Campbell

Abstract: We study how temperature affects the lifetime of a quantized, persistent current state in a toroidal Bose-Einstein condensate (BEC). When the temperature is increased, we find a decrease in the persistent current lifetime. Comparing our measured decay rates to simple models of thermal activation and quantum tunneling, we do not find agreement. We also measured the size of hysteresis loops size in… ▽ More We study how temperature affects the lifetime of a quantized, persistent current state in a toroidal Bose-Einstein condensate (BEC). When the temperature is increased, we find a decrease in the persistent current lifetime. Comparing our measured decay rates to simple models of thermal activation and quantum tunneling, we do not find agreement. We also measured the size of hysteresis loops size in our superfluid ring as a function of temperature, enabling us to extract the critical velocity. The measured critical velocity is found to depend strongly on temperature, approaching the zero temperature mean-field solution as the temperature is decreased. This indicates that an appropriate definition of critical velocity must incorporate the role of thermal fluctuations, something not explicitly contained in traditional theories. △ Less

Submitted 1 December, 2016; v1 submitted 9 August, 2016; originally announced August 2016.

Comments: Main paper: 5 pages, 4 figures. Supplemental material: 4 pages

Journal ref: Phys. Rev. A 95, 021602(R) (2017)

A 3-photon process for producing a degenerate gas of metastable alkaline-earth atoms

Authors: D. S. Barker, N. C. Pisenti, B. J. Reschovsky, G. K. Campbell

Abstract: We present a method for creating a quantum degenerate gas of metastable alkaline-earth atoms. This has yet to be achieved due to inelastic collisions that limit evaporative cooling in the metastable states. Quantum degenerate samples prepared in the $^{1}S_{0}$ ground state can be rapidly transferred to either the $^{3}P_{2}$ or $^{3}P_{0}$ state via a coherent 3-photon process. Numerical integrat… ▽ More We present a method for creating a quantum degenerate gas of metastable alkaline-earth atoms. This has yet to be achieved due to inelastic collisions that limit evaporative cooling in the metastable states. Quantum degenerate samples prepared in the $^{1}S_{0}$ ground state can be rapidly transferred to either the $^{3}P_{2}$ or $^{3}P_{0}$ state via a coherent 3-photon process. Numerical integration of the density matrix evolution for the fine structure of bosonic alkaline-earth atoms shows that transfer efficiencies of $\simeq90\%$ can be achieved with experimentally feasible laser parameters in both Sr and Yb. Importantly, the 3-photon process can be set up such that it imparts no net momentum to the degenerate gas during the excitation, which will allow for studies of metastable samples outside the Lamb-Dicke regime. We discuss several experimental challenges to successfully realizing our scheme, including the minimization of differential AC Stark shifts between the four states connected by the 3-photon transition. △ Less

Submitted 19 April, 2016; v1 submitted 1 April, 2016; originally announced April 2016.

Comments: 8 pages, 5 figures

Journal ref: Phys. Rev. A 93, 053417 (2016)

Highly Stretchable MoS$_2$ Kirigami

Authors: Paul Z. Hanakata, Zenan Qi, David K. Campbell, Harold S. Park

Abstract: We report the results of classical molecular dynamics simulations focused on studying the mechanical properties of MoS$_{2}$ kirigami. Several different kirigami structures were studied based upon two simple non-dimensional parameters, which are related to the density of cuts, as well as the ratio of the overlapping cut length to the nanoribbon length. Our key finding is significant enhancements i… ▽ More We report the results of classical molecular dynamics simulations focused on studying the mechanical properties of MoS$_{2}$ kirigami. Several different kirigami structures were studied based upon two simple non-dimensional parameters, which are related to the density of cuts, as well as the ratio of the overlapping cut length to the nanoribbon length. Our key finding is significant enhancements in tensile yield (by a factor of four) and fracture strains (by a factor of six) as compared to pristine MoS$_{2}$ nanoribbons. These results in conjunction with recent results on graphene suggest that the kirigami approach may be a generally useful one for enhancing the ductility of two-dimensional nanomaterials. △ Less

Submitted 17 December, 2015; v1 submitted 9 November, 2015; originally announced November 2015.

Journal ref: Nanoscale, 2016, 8, 458-463

Enhanced Magnetic Trap Loading for Atomic Strontium

Authors: D. S. Barker, B. J. Reschovsky, N. C. Pisenti, G. K. Campbell

Abstract: We report on a technique to improve the continuous loading of atomic strontium into a magnetic trap from a Magneto-Optical Trap (MOT). This is achieved by adding a depumping laser tuned to the 3P1 to 3S1 (688-nm) transition. The depumping laser increases atom number in the magnetic trap and subsequent cooling stages by up to 65 % for the bosonic isotopes and up to 30 % for the fermionic isotope of… ▽ More We report on a technique to improve the continuous loading of atomic strontium into a magnetic trap from a Magneto-Optical Trap (MOT). This is achieved by adding a depumping laser tuned to the 3P1 to 3S1 (688-nm) transition. The depumping laser increases atom number in the magnetic trap and subsequent cooling stages by up to 65 % for the bosonic isotopes and up to 30 % for the fermionic isotope of strontium. We optimize this trap loading strategy with respect to the 688-nm laser detuning, intensity, and beam size. To understand the results, we develop a one-dimensional rate equation model of the system, which is in good agreement with the data. We discuss the use of other transitions in strontium for accelerated trap loading and the application of the technique to other alkaline-earth-like atoms. △ Less

Submitted 25 September, 2015; v1 submitted 21 August, 2015; originally announced August 2015.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. A 92, 043418 (2015)

Self-heterodyne detection of the {\it in-situ} phase of an atomic-SQUID

Authors: Ranchu Mathew, Avinash Kumar, Stephen Eckel, Fred Jendrzejewski, Gretchen K. Campbell, Mark Edwards, Eite Tiesinga

Abstract: We present theoretical and experimental analysis of an interferometric measurement of the {\it in-situ} phase drop across and current flow through a rotating barrier in a toroidal Bose-Einstein condensate (BEC). This experiment is the atomic analog of the rf-superconducting quantum interference device (SQUID). The phase drop is extracted from a spiral-shaped density profile created by the spatial… ▽ More We present theoretical and experimental analysis of an interferometric measurement of the {\it in-situ} phase drop across and current flow through a rotating barrier in a toroidal Bose-Einstein condensate (BEC). This experiment is the atomic analog of the rf-superconducting quantum interference device (SQUID). The phase drop is extracted from a spiral-shaped density profile created by the spatial interference of the expanding toroidal BEC and a reference BEC after release from all trapping potentials. We characterize the interferometer when it contains a single particle, which is initially in a coherent superposition of a torus and reference state, as well as when it contains a many-body state in the mean-field approximation. The single-particle picture is sufficient to explain the origin of the spirals, to relate the phase-drop across the barrier to the geometry of a spiral, and to bound the expansion times for which the {\it in-situ} phase can be accurately determined. Mean-field estimates and numerical simulations show that the inter-atomic interactions shorten the expansion time scales compared to the single-particle case. Finally, we compare the mean-field simulations with our experimental data and confirm that the interferometer indeed accurately measures the {\it in-situ} phase drop. △ Less

Submitted 10 September, 2015; v1 submitted 30 June, 2015; originally announced June 2015.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. A 92, 033602 (2015)

Highly Deformable Graphene Kirigami

Authors: Zenan Qi, Harold S. Park, David K. Campbell

Abstract: Graphene's exceptional mechanical properties, including its highest-known stiffness (1 TPa) and strength (100 GPa) have been exploited for various structural applications. However, graphene is also known to be quite brittle, with experimentally-measured tensile fracture strains that do not exceed a few percent. In this work, we introduce the notion of graphene kirigami, where concepts that have be… ▽ More Graphene's exceptional mechanical properties, including its highest-known stiffness (1 TPa) and strength (100 GPa) have been exploited for various structural applications. However, graphene is also known to be quite brittle, with experimentally-measured tensile fracture strains that do not exceed a few percent. In this work, we introduce the notion of graphene kirigami, where concepts that have been used almost exclusively for macroscale structures are applied to dramatically enhance the stretchability of both zigzag and armchair graphene. Specifically, we show using classical molecular dynamics simulations that the yield and fracture strains of graphene can be enhanced by about a factor of three using kirigami as compared to standard monolayer graphene. This enhanced ductility in graphene should open up interesting opportunities not only mechanically, but also in coupling to graphene's electronic behavior. △ Less

Submitted 30 July, 2014; originally announced July 2014.

Comments: 5 pages, 7 figures

Journal ref: Phys. Rev. B 90, 245437 (2014)

Pseudomagnetic fields in graphene nanobubbles of constrained geometry: A molecular dynamics study

Authors: Zenan Qi, Alexander L. Kitt, Harold S. Park, Vitor M. Pereira, David K. Campbell, A. H. Castro Neto

Abstract: Analysis of the strain-induced pseudomagnetic fields (PMFs) generated in graphene nanobulges under three different substrate scenarios shows that, in addition to the shape, the graphene-substrate interaction can crucially determine the overall distribution and magnitude of strain and those fields, in and outside the bulge. We utilize a combination of classical molecular dynamics, continuum mechani… ▽ More Analysis of the strain-induced pseudomagnetic fields (PMFs) generated in graphene nanobulges under three different substrate scenarios shows that, in addition to the shape, the graphene-substrate interaction can crucially determine the overall distribution and magnitude of strain and those fields, in and outside the bulge. We utilize a combination of classical molecular dynamics, continuum mechanics, and tight-binding electronic structure calculations as an unbiased means of studying pressure-induced deformations and the resulting PMF in graphene nanobubbles of various geometries. The interplay among substrate aperture geometry, lattice orientation, internal gas pressure, and substrate type is analyzed in view of strain-engineered graphene nanostructures capable of confining and/or guiding electrons at low energies. Except in highly anisotropic geometries, the magnitude of the PMF is generally significant only near the boundaries of the aperture and rapidly decays towards the center because under gas pressure at the scales considered here there is considerable bending at the edges and the central region displays nearly isotropic strain. When the deflection lead to sharp bends at the edges, curvature and the tilting of the $p_z$ orbitals cannot be ignored and contributes substantially to the total field. The strong and localized nature of the PMF at the boundaries and its polarity-changing profile can be exploited to trap electrons inside the bubble or of guiding them in channel-like geometries defined by edges. However, we establish that slippage of graphene against the substrate is an important factor in determining the degree of concentration of PMFs in or around the bulge since it can lead to considerable softening of the strain gradients there. The nature of the substrate emerges thus as a decisive factor determining the effectiveness of nanoscale PMFs tailoring in graphene. △ Less

Submitted 16 September, 2014; v1 submitted 4 June, 2014; originally announced June 2014.

Comments: 20 pages, 20 figures including appendices, references updated

Journal ref: Phys. Rev. B 90, 125419 (2014)

Design of a Casimir-driven parametric amplifier

Authors: M. Imboden, J. Morrison, D. K. Campbell, D. J. Bishop

Abstract: In this paper, we discuss a design for a MEMS parametric amplifier modulated by the Casimir force. We present the theory for such a device and show that it allows for the implementation of a very sensitive voltage measuring technique, where the amplitude of a high quality factor resonator includes a tenth power dependency on an applied DC voltage. This approach opens up a new and powerful measurin… ▽ More In this paper, we discuss a design for a MEMS parametric amplifier modulated by the Casimir force. We present the theory for such a device and show that it allows for the implementation of a very sensitive voltage measuring technique, where the amplitude of a high quality factor resonator includes a tenth power dependency on an applied DC voltage. This approach opens up a new and powerful measuring modality, applicable to other measurement types. △ Less

Submitted 4 September, 2014; v1 submitted 12 April, 2014; originally announced April 2014.

Comments: 18 pages, 4 figures

Hysteresis in a quantized, superfluid atomtronic circuit

Authors: Stephen Eckel, Jeffrey G. Lee, Fred Jendrzejewski, Noel Murray, Charles W. Clark, Christopher J. Lobb, William D. Phillips, Mark Edwards, Gretchen K. Campbell

Abstract: Atomtronics is an emerging interdisciplinary field that seeks new functionality by creating devices and circuits where ultra-cold atoms, often superfluids, play a role analogous to the electrons in electronics. Hysteresis is widely used in electronic circuits, e.g., it is routinely observed in superconducting circuits and is essential in rf-superconducting quantum interference devices [SQUIDs]. Fu… ▽ More Atomtronics is an emerging interdisciplinary field that seeks new functionality by creating devices and circuits where ultra-cold atoms, often superfluids, play a role analogous to the electrons in electronics. Hysteresis is widely used in electronic circuits, e.g., it is routinely observed in superconducting circuits and is essential in rf-superconducting quantum interference devices [SQUIDs]. Furthermore, hysteresis is as fundamental to superfluidity (and superconductivity) as quantized persistent currents, critical velocity, and Josephson effects. Nevertheless, in spite of multiple theoretical predictions, hysteresis has not been previously observed in any superfluid, atomic-gas Bose-Einstein condensate (BEC). Here we demonstrate hysteresis in a quantized atomtronic circuit: a ring of superfluid BEC obstructed by a rotating weak link. We directly detect hysteresis between quantized circulation states, in contrast to superfluid liquid helium experiments that observed hysteresis directly in systems where the quantization of flow could not be observed and indirectly in systems that showed quantized flow. Our techniques allow us to tune the size of the hysteresis loop and to consider the fundamental excitations that accompany hysteresis. The results suggest that the relevant excitations involved in hysteresis are vortices and indicate that dissipation plays an important role in the dynamics. Controlled hysteresis in atomtronic circuits may prove to be a crucial feature for the development of practical devices, just as it has in electronic circuits like memory, digital noise filters (e.g., Schmitt triggers), and magnetometers (e.g., SQUIDs). △ Less

Submitted 1 October, 2014; v1 submitted 12 February, 2014; originally announced February 2014.

Comments: 20 pages, 4 figures

Journal ref: Nature 506, 200-203 (2014)

Chaos at Fifty

Authors: Adilson E. Motter, David K. Campbell

Abstract: In 1963 Edward Lorenz revealed deterministic predictability to be an illusion and gave birth to a field that still thrives. This Feature Article discusses Lorenz's discovery and developments that followed from it. In 1963 Edward Lorenz revealed deterministic predictability to be an illusion and gave birth to a field that still thrives. This Feature Article discusses Lorenz's discovery and developments that followed from it. △ Less

Submitted 24 June, 2013; originally announced June 2013.

Comments: For an animated visualization of the Lorenz attractor, click here http://www.youtube.com/watch?v=iu4RdmBVdps

Journal ref: Physics Today 66(5), 27-33 (2013)

Partial-Transfer Absorption Imaging: A versatile technique for optimal imaging of ultracold gases

Authors: Anand Ramanathan, Sérgio R. Muniz, Kevin C. Wright, Russell P. Anderson, William D. Phillips, Kristian Helmerson, Gretchen K. Campbell

Abstract: Partial-transfer absorption imaging is a tool that enables optimal imaging of atomic clouds for a wide range of optical depths. In contrast to standard absorption imaging, the technique can be minimally-destructive and can be used to obtain multiple successive images of the same sample. The technique involves transferring a small fraction of the sample from an initial internal atomic state to an a… ▽ More Partial-transfer absorption imaging is a tool that enables optimal imaging of atomic clouds for a wide range of optical depths. In contrast to standard absorption imaging, the technique can be minimally-destructive and can be used to obtain multiple successive images of the same sample. The technique involves transferring a small fraction of the sample from an initial internal atomic state to an auxiliary state and subsequently imaging that fraction absorptively on a cycling transition. The atoms remaining in the initial state are essentially unaffected. We demonstrate the technique, discuss its applicability, and compare its performance as a minimally-destructive technique to that of phase-contrast imaging. △ Less

Submitted 29 June, 2012; originally announced June 2012.

Comments: 10 pages, 5 figures, submitted to Review of Scientific Instruments

Journal ref: Rev. Sci. Instrum. 83, 083119 (2012);

Global Phase Space of Coherence and Entanglement in a double-well BEC

Authors: Holger Hennig, Dirk Witthaut, David K. Campbell

Abstract: Ultracold atoms provide an ideal system for the realization of quantum technologies, but also for the study of fundamental physical questions such as the emergence of decoherence and classicality in quantum many-body systems. Here, we study the global structure of the quantum dynamics of bosonic atoms in a double-well trap and analyze the conditions for the generation of many-particle entanglement… ▽ More Ultracold atoms provide an ideal system for the realization of quantum technologies, but also for the study of fundamental physical questions such as the emergence of decoherence and classicality in quantum many-body systems. Here, we study the global structure of the quantum dynamics of bosonic atoms in a double-well trap and analyze the conditions for the generation of many-particle entanglement and spin squeezing which have important applications in quantum metrology. We show how the quantum dynamics is determined by the phase space structure of the associated mean-field system and where true quantum features arise beyond this `classical' approximation. △ Less

Submitted 12 August, 2012; v1 submitted 1 June, 2012; originally announced June 2012.

Rabi Spectroscopy and Excitation Inhomogeneity in a 1D Optical Lattice Clock

Authors: S. Blatt, J. W. Thomsen, G. K. Campbell, A. D. Ludlow, M. D. Swallows, M. J. Martin, M. M. Boyd, Jun Ye

Abstract: We investigate the influence of atomic motion on precision Rabi spectroscopy of ultracold fermionic atoms confined in a deep, one dimensional (1D) optical lattice. We analyze the spectral components of longitudinal sideband spectra and present a model to extract information about the transverse motion and sample temperature from their structure. Rabi spectroscopy of the clock transition itself i… ▽ More We investigate the influence of atomic motion on precision Rabi spectroscopy of ultracold fermionic atoms confined in a deep, one dimensional (1D) optical lattice. We analyze the spectral components of longitudinal sideband spectra and present a model to extract information about the transverse motion and sample temperature from their structure. Rabi spectroscopy of the clock transition itself is also influenced by atomic motion in the weakly confined transverse directions of the optical lattice. By deriving Rabi flopping and Rabi lineshapes of the carrier transition, we obtain a model to quantify trap state dependent excitation inhomogeneities. The inhomogeneously excited ultracold fermions become distinguishable, which allows s-wave collisions. We derive a detailed model of this process and explain observed density shift data in terms of a dynamic mean field shift of the clock transition. △ Less

Submitted 1 September, 2009; v1 submitted 8 June, 2009; originally announced June 2009.

Comments: 11 pages, 8 figures, to appear in Phys. Rev. A. Changes to abstract, text, and figures, new reference

Journal ref: Phys. Rev. A 80, 052703 (2009)

Probing Interactions between Ultracold Fermions

Authors: G. K. Campbell, M. M. Boyd, J. W. Thomsen, M. J. Martin, S. Blatt, M. D. Swallows, T. L. Nicholson, T. Fortier, C. W. Oates, S. A. Diddams, N. D. Lemke, P. Naidon, P. Julienne, Jun Ye, A. D. Ludlow

Abstract: At ultracold temperatures, the Pauli exclusion principle suppresses collisions between identical fermions. This has motivated the development of atomic clocks using fermionic isotopes. However, by probing an optical clock transition with thousands of lattice-confined, ultracold fermionic Sr atoms, we have observed density-dependent collisional frequency shifts. These collision effects have been… ▽ More At ultracold temperatures, the Pauli exclusion principle suppresses collisions between identical fermions. This has motivated the development of atomic clocks using fermionic isotopes. However, by probing an optical clock transition with thousands of lattice-confined, ultracold fermionic Sr atoms, we have observed density-dependent collisional frequency shifts. These collision effects have been measured systematically and are supported by a theoretical description attributing them to inhomogeneities in the probe excitation process that render the atoms distinguishable. This work has also yielded insights for zeroing the clock density shift. △ Less

Submitted 19 February, 2009; v1 submitted 15 February, 2009; originally announced February 2009.

Comments: accepted to Science

Journal ref: Science 324, 360 (2009)

The absolute frequency of the 87Sr optical clock transition

Authors: Gretchen K. Campbell, Andrew D. Ludlow, Sebastian Blatt, Jan W. Thomsen, Michael J. Martin, Marcio H. G. de Miranda, Tanya Zelevinsky, Martin M. Boyd, Jun Ye, Scott A. Diddams, Thomas P. Heavner, Thomas E. Parker, Steven R. Jefferts

Abstract: The absolute frequency of the 1S0-3P0 clock transition of 87Sr has been measured to be 429 228 004 229 873.65 (37) Hz using lattice-confined atoms, where the fractional uncertainty of 8.6x10-16 represents one of the most accurate measurements of an atomic transition frequency to date. After a detailed study of systematic effects, which reduced the total systematic uncertainty of the Sr lattice c… ▽ More The absolute frequency of the 1S0-3P0 clock transition of 87Sr has been measured to be 429 228 004 229 873.65 (37) Hz using lattice-confined atoms, where the fractional uncertainty of 8.6x10-16 represents one of the most accurate measurements of an atomic transition frequency to date. After a detailed study of systematic effects, which reduced the total systematic uncertainty of the Sr lattice clock to 1.5x10-16, the clock frequency is measured against a hydrogen maser which is simultaneously calibrated to the US primary frequency standard, the NIST Cs fountain clock, NIST-F1. The comparison is made possible using a femtosecond laser based optical frequency comb to phase coherently connect the optical and microwave spectral regions and by a 3.5 km fiber transfer scheme to compare the remotely located clock signals. △ Less

Submitted 28 April, 2008; originally announced April 2008.

Journal ref: Metrologia 45, 539-548 (2008).

Sr lattice clock at 1x10^{-16} fractional uncertainty by remote optical evaluation with a Ca clock

Authors: A. D. Ludlow, T. Zelevinsky, G. K. Campbell, S. Blatt, M. M. Boyd, M. H. G. de Miranda, M. J. Martin, J. W. Thomsen, S. M. Foreman, Jun Ye, T. M. Fortier, J. E. Stalnaker, S. A. Diddams, Y. Le Coq, Z. W. Barber, N. Poli, N. D. Lemke, K. M. Beck, C. W. Oates

Abstract: Optical atomic clocks promise timekeeping at the highest precision and accuracy, owing to their high operating frequencies. Rigorous evaluations of these clocks require direct comparisons between them. We have realized a high-performance remote comparison of optical clocks over km-scale urban distances, a key step for development, dissemination, and application of these optical standards. Throug… ▽ More Optical atomic clocks promise timekeeping at the highest precision and accuracy, owing to their high operating frequencies. Rigorous evaluations of these clocks require direct comparisons between them. We have realized a high-performance remote comparison of optical clocks over km-scale urban distances, a key step for development, dissemination, and application of these optical standards. Through this remote comparison and a proper design of lattice-confined neutral atoms for clock operation, we evaluate the uncertainty of a strontium (Sr) optical lattice clock at the 1x10-16 fractional level, surpassing the best current evaluations of cesium (Cs) primary standards. We also report on the observation of density-dependent effects in the spin-polarized fermionic sample and discuss the current limiting effect of blackbody radiation-induced frequency shifts. △ Less

Submitted 28 March, 2008; v1 submitted 28 January, 2008; originally announced January 2008.

Comments: To be published in Science, 2008

Journal ref: Science 319, 1805 (2008)

New Limits on Coupling of Fundamental Constants to Gravity Using $^{87}$Sr Optical Lattice Clocks

Authors: S. Blatt, A. D. Ludlow, G. K. Campbell, J. W. Thomsen, T. Zelevinsky, M. M. Boyd, J. Ye, X. Baillard, M. Fouché, R. Le Targat, A. Brusch, P. Lemonde, M. Takamoto, F. -L. Hong, H. Katori, V. V. Flambaum

Abstract: The $^1\mathrm{S}_0$-$^3\mathrm{P}_0$ clock transition frequency $ν_\text{Sr}$ in neutral $^{87}$Sr has been measured relative to the Cs standard by three independent laboratories in Boulder, Paris, and Tokyo over the last three years. The agreement on the $1\times 10^{-15}$ level makes $ν_\text{Sr}$ the best agreed-upon optical atomic frequency. We combine periodic variations in the $^{87}$Sr c… ▽ More The $^1\mathrm{S}_0$-$^3\mathrm{P}_0$ clock transition frequency $ν_\text{Sr}$ in neutral $^{87}$Sr has been measured relative to the Cs standard by three independent laboratories in Boulder, Paris, and Tokyo over the last three years. The agreement on the $1\times 10^{-15}$ level makes $ν_\text{Sr}$ the best agreed-upon optical atomic frequency. We combine periodic variations in the $^{87}$Sr clock frequency with $^{199}$Hg$^+$ and H-maser data to test Local Position Invariance by obtaining the strongest limits to date on gravitational-coupling coefficients for the fine-structure constant $α$, electron-proton mass ratio $μ$ and light quark mass. Furthermore, after $^{199}$Hg$^+$, $^{171}$Yb$^+$ and H, we add $^{87}$Sr as the fourth optical atomic clock species to enhance constraints on yearly drifts of $α$ and $μ$. △ Less

Submitted 29 April, 2008; v1 submitted 11 January, 2008; originally announced January 2008.

Comments: Published version. 4 pages, 4 figures

Journal ref: Phys.Rev.Lett.100:140801,2008

Dynamical Instabilities and Deterministic Chaos in Ballistic Electron Motion in Semiconductor Superlattices

Authors: Kirill N. Alekseev, Gennady P. Berman, David K. Campbell

Abstract: We consider the motion of ballistic electrons within a superlattice miniband under the influence of an alternating electric field. We show that the interaction of electrons with the self-consistent electromagnetic field generated by the electron current may lead to the transition from regular to chaotic dynamics. We estimate the conditions for the experimental observation of this deterministic c… ▽ More We consider the motion of ballistic electrons within a superlattice miniband under the influence of an alternating electric field. We show that the interaction of electrons with the self-consistent electromagnetic field generated by the electron current may lead to the transition from regular to chaotic dynamics. We estimate the conditions for the experimental observation of this deterministic chaos and discuss the similarities of the superlattice system with the other condensed matter and quantum optical systems. △ Less

Submitted 29 July, 1998; originally announced July 1998.

Comments: 6 pages, RevTEX; 4 figs

Journal ref: Phys. Lett. A 193, 54-60 (1994)