-
Thermal Resilience of Suspended Thin-Film Lithium Niobate Acoustic Resonators up to 550 °C
Authors:
Mihir Chaudhari,
Naveed Ahmed,
Vivek Tallavajhula,
Joshua Campbell,
Yinan Wang,
Ziran Du,
Ruochen Lu
Abstract:
This paper reports a suspended thin-film lithium niobate (LN) piezoelectric resonator platform surviving high annealing temperatures of 550 °C, among the highest temperature at which the thermal resilience of suspended LN resonators is studied. Acoustic resonators are built on 600 nm thick transferred stoichiometric LN on silicon wafers with 40 nm thick platinum (Pt) electrodes, selected for high…
▽ More
This paper reports a suspended thin-film lithium niobate (LN) piezoelectric resonator platform surviving high annealing temperatures of 550 °C, among the highest temperature at which the thermal resilience of suspended LN resonators is studied. Acoustic resonators are built on 600 nm thick transferred stoichiometric LN on silicon wafers with 40 nm thick platinum (Pt) electrodes, selected for high temperature operation. The fabricated resonators are first annealed at 250 °C, and the anneal temperature is incrementally increased to 550 °C after 7 rounds of annealing. The annealing is shown to upshift resonant frequencies and can increase the quality factor (Q), within a temperature range, before it gradually damages the device performance. This work presents promising results for using the suspended thin-film LN platform for resonators, sensors, and transducers in harsh thermal environments.
△ Less
Submitted 30 April, 2025; v1 submitted 29 April, 2025;
originally announced April 2025.
-
Low-Loss Higher-Order Cross-Sectional Lamé Mode SAW Devices in 10-20 GHz Range
Authors:
Ian Anderson,
Tzu-Hsuan Hsu,
Vakhtang Chulukhadze,
Jack Kramer,
Sinwoo Cho,
Omar A. Barrera,
Joshua Campbell,
Ming-Huang Li,
Ruochen Lu
Abstract:
This paper presents surface acoustic wave (SAW) acoustic delay lines (ADL) for studying propagation loss mechanisms in Lithium Niobate (LN). Devices were fabricated by depositing 50 nm aluminum patterns on 600 nm X-Cut LN on amorphous silicon on silicon carbide, where longitudinally dominant SAW was targeted. Upon fabrication, higher-order thickness-based cross-sectional Lamé modes and Rayleigh mo…
▽ More
This paper presents surface acoustic wave (SAW) acoustic delay lines (ADL) for studying propagation loss mechanisms in Lithium Niobate (LN). Devices were fabricated by depositing 50 nm aluminum patterns on 600 nm X-Cut LN on amorphous silicon on silicon carbide, where longitudinally dominant SAW was targeted. Upon fabrication, higher-order thickness-based cross-sectional Lamé modes and Rayleigh modes were studied for their Q factors using acoustic delay lines. Utilizing bi-directional electrodes, ADL with lateral lambda values ranging from 0.4 um to 0.6 um were measured. Higher order Lame modes were found to have consistently higher Q factors than their Rayleigh mode counterpart, on the order of 1000-3000, showing high-frequency SAW devices as still viable candidates for frequency scaling without a substantial increase in loss.
△ Less
Submitted 19 October, 2024; v1 submitted 21 September, 2024;
originally announced September 2024.
-
18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector
Authors:
Omar Barrera,
Nishanth Ravi,
Kapil Saha,
Supratik Dasgupta,
Joshua Campbell,
Jack Kramer,
Eugene Kwon,
Tzu-Hsuan Hsu,
Sinwoo Cho,
Ian Anderson,
Pietro Simeoni,
Jue Hou,
Matteo Rinaldi,
Mark S. Goorsky,
Ruochen Lu
Abstract:
This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator…
▽ More
This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator shows a coupling coefficient (k2) of 2.0%, high series quality factor (Qs) of 156, shunt quality factor (Qp) of 142, and maximum Bode quality factor (Qmax) of 210. The third-order harmonics at 59.64 GHz is also observed with k2 around 0.6% and Q around 40. Upon further development, the reported acoustic resonator platform can enable various front-end signal-processing functions, e.g., filters and oscillators, at future frequency range 3 (FR3) bands.
△ Less
Submitted 7 September, 2024; v1 submitted 2 July, 2024;
originally announced July 2024.
-
2 to 16 GHz Fundamental Symmetric Mode Acoustic Resonators in Piezoelectric Thin-Film Lithium Niobate
Authors:
Vakhtang Chulukhadze,
Jack Kramer,
Tzu-Hsuan Hsu,
Omar Barrera,
Ian Anderson,
Sinwoo Cho,
Joshua Campbell,
Ruochen Lu
Abstract:
As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode en…
▽ More
As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode enable monolithic multi-frequency fabrication, transversal filters, correlators, and other compact signal processing components. In this work, we present thin-film lithium niobate (LN) S0 resonators scaled up to 16 GHz. Specifically, we study the characteristics of the S0 mode as the wavelength is minimized and showcase a device at 14.9 GHz with a Bode Q maximum of 391, a k2 of 6%, and a figure of merit (FoM) of 23.33, surpassing the state-of-the-art (SoA) in its frequency range.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Ultra-Wideband Tapered Transducers in Thin-Film Lithium Niobate on Silicon Carbide
Authors:
Jack Kramer,
Tzu-Hsuan Hsu,
Joshua Campbell,
Ruochen Lu
Abstract:
Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome th…
▽ More
Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome this limitation. The design is realized on a lithium niobate (LN) on silicon carbide platform, utilizing a combination of first and higher order shear-horizontal modes to generate the ultra-wideband response. The implementation shows a fractional bandwidth (FBW) of 55% at 2.23 GHz with an associated insertion loss (IL) of 26 dB for the measured 50 ohm case. Upon improved impedance matching, this performance could be improved to 79% FBW and an IL of 16.5 dB. Upon further development, this ultra-wideband design could be reasonably scaled towards improved FBW and IL trade off to enable improved usability for cases where bandwidth should be prioritized.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Tunable X-band opto-electronic synthesizer with ultralow phase noise
Authors:
Igor Kudelin,
Pedram Shirmohammadi,
William Groman,
Samin Hanifi,
Megan L. Kelleher,
Dahyeon Lee,
Takuma Nakamura,
Charles A. McLemore,
Alexander Lind,
Dylan Meyer,
Junwu Bai,
Joe C. Campbell,
Steven M. Bowers,
Franklyn Quinlan,
Scott A. Diddams
Abstract:
Modern communication, navigation, and radar systems rely on low noise and frequency-agile microwave sources. In this application space, photonic systems provide an attractive alternative to conventional microwave synthesis by leveraging high spectral purity lasers and optical frequency combs to generate microwaves with exceedingly low phase noise. However, these photonic techniques suffer from a l…
▽ More
Modern communication, navigation, and radar systems rely on low noise and frequency-agile microwave sources. In this application space, photonic systems provide an attractive alternative to conventional microwave synthesis by leveraging high spectral purity lasers and optical frequency combs to generate microwaves with exceedingly low phase noise. However, these photonic techniques suffer from a lack of frequency tunability, and also have substantial size, weight, and power requirements that largely limit their use to laboratory settings. In this work, we address these shortcomings with a hybrid opto-electronic approach that combines simplified optical frequency division with direct digital synthesis to produce tunable low-phase-noise microwaves across the entire X-band. This results in exceptional phase noise at 10 GHz of -156 dBc/Hz at 10 kHz offset and fractional frequency instability of 1x10^-13 at 0.1 s. Spot tuning away from 10 GHz by 500 MHz, 1 GHz, and 2 GHz, yields phase noise at 10 kHz offset of -150 dBc/Hz, -146 dBc/Hz, and -140 dBc/Hz, respectively. The synthesizer architecture is fully compatible with integrated photonic implementations that will enable a versatile microwave source in a chip-scale package. Together, these advances illustrate an impactful and practical synthesis technique that shares the combined benefits of low timing noise provided by photonics and the frequency agility of established digital synthesis.
△ Less
Submitted 29 March, 2024;
originally announced April 2024.
-
23.8-GHz Acoustic Filter in Periodically Poled Piezoelectric Film Lithium Niobate With 1.52-dB IL and 19.4% FBW
Authors:
Sinwoo Cho,
Omar Barrera,
Jack Kramer,
Vakhtang Chulukhadze,
Tzu-Hsuan Hsu,
Joshua Campbell,
Ian Anderson,
Ruochen Lu
Abstract:
This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y…
▽ More
This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y-cut LiNbO3 thin film, operating in second-order symmetric (S2) Lamb mode. The record-breaking performance is enabled by the P3F LiNbO3 platform, where piezoelectric thin films of alternating orientations are transferred subsequently, facilitating efficient higher-order Lamb mode operation with simultaneously high quality factor (Q) and coupling coefficient (k2) at millimeter-wave (mmWave). Also, the multi-layer P3F stack promises smaller footprints and better nonlinearity than single-layer counterparts, thanks to the higher capacitance density and lower thermal resistance. Upon further development, the reported P3F LiNbO3 platform is promising for compact filters at mmWave.
△ Less
Submitted 28 June, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Design of a compact, radiation tolerant AlGaAs Geiger photodiode
Authors:
Matthew Downing,
Erik B. Johnson,
Joe Campbell,
Adam A. Dadey
Abstract:
The Geiger photodiodes, or single photon avalanche photodiodes, for a radiation tolerant solid-state photomultiplier (SSPM) are being designed using Aluminum Gallium Arsenide (AlGaAs) and are less than 1 micrometer thick. Studies on the changes in dark current compared to silicon from thermal neutron damage were conducted demonstrating that the design concept is feasible, as the device sensitivity…
▽ More
The Geiger photodiodes, or single photon avalanche photodiodes, for a radiation tolerant solid-state photomultiplier (SSPM) are being designed using Aluminum Gallium Arsenide (AlGaAs) and are less than 1 micrometer thick. Studies on the changes in dark current compared to silicon from thermal neutron damage were conducted demonstrating that the design concept is feasible, as the device sensitivity to incident radiation is low relative to silicon devices. To achieve the required high fields for Geiger mode operation within a thin device, a triple mesa structure was developed, and simulations show a favorable field profile that constrains the highest electric fields to the middle of the device and keeps the field strength at all corners and surfaces 3-6x lower than the field in the center at breakdown.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Correcting for T1 bias in Magnetization Transfer Saturation (MTsat) Maps Using Sparse-MP2RAGE
Authors:
Christopher D. Rowley,
Mark C. Nelson,
Jennifer S. W. Campbell,
Ilana R. Leppert,
G. Bruce Pike,
Christine L. Tardif
Abstract:
Purpose: Magnetization transfer saturation (MTsat) mapping is commonly used to examine the macromolecular content of brain tissue. This study compared variable flip angle (VFA) T1 mapping against compressed sensing (cs)MP2RAGE T1 mapping for accelerating MTsat imaging. Methods: VFA, MP2RAGE and csMP2RAGE were compared against inversion recovery (IR) T1 in a phantom at 3 Tesla. The same 1 mm VFA, M…
▽ More
Purpose: Magnetization transfer saturation (MTsat) mapping is commonly used to examine the macromolecular content of brain tissue. This study compared variable flip angle (VFA) T1 mapping against compressed sensing (cs)MP2RAGE T1 mapping for accelerating MTsat imaging. Methods: VFA, MP2RAGE and csMP2RAGE were compared against inversion recovery (IR) T1 in a phantom at 3 Tesla. The same 1 mm VFA, MP2RAGE and csMP2RAGE protocols were acquired in four healthy subjects to compare the resulting T1 and MTsat. Bloch-McConnell simulations were used to investigate differences between the phantom and in vivo T1 results. Finally, ten healthy controls were imaged twice with the csMP2RAGE MTsat protocol to quantify repeatability. Results: The MP2RAGE and csMP2RAGE protocols were 13.7% and 32.4% faster than the VFA protocol, respectively. All approaches provided accurate T1 values (<5% difference) in the phantom, but the accuracy of the T1 times was more impacted by differences in T2 for VFA than for MP2RAGE. In vivo, VFA generated longer T1 times than MP2RAGE and csMP2RAGE. Simulations suggest that the bias in the T1 values between VFA and IR-based approaches (MP2RAGE and IR) could be explained by the MT-effects from the inversion pulse. In the test-retest experiment, we found that the csMP2RAGE has a minimum detectable change of 3% for T1 mapping and 7.9% for MTsat imaging. Conclusions: We demonstrated that csMP2RAGE can be used in place of VFA T1 mapping in an MTsat protocol. Furthermore, a shorter scan time and high repeatability can be achieved using the csMP2RAGE sequence.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Photonic chip-based low noise microwave oscillator
Authors:
Igor Kudelin,
William Groman,
Qing-Xin Ji,
Joel Guo,
Megan L. Kelleher,
Dahyeon Lee,
Takuma Nakamura,
Charles A. McLemore,
Pedram Shirmohammadi,
Samin Hanifi,
Haotian Cheng,
Naijun Jin,
Sam Halliday,
Zhaowei Dai,
Lue Wu,
Warren Jin,
Yifan Liu,
Wei Zhang,
Chao Xiang,
Vladimir Iltchenko,
Owen Miller,
Andrey Matsko,
Steven Bowers,
Peter T. Rakich,
Joe C. Campbell
, et al. (4 additional authors not shown)
Abstract:
Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are diffic…
▽ More
Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-Pérot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Dual-encoded magnetization transfer and diffusion imaging and its application to tract-specific microstructure mapping
Authors:
Ilana R Leppert,
Pietro Bontempi,
Christopher D Rowley,
Jennifer SW Campbell,
Mark C Nelson,
Simona Schiavi,
G Bruce Pike,
Alessandro Daducci,
Christine L Tardif
Abstract:
We present a novel dual-encoded magnetization transfer (MT) and diffusion-weighted sequence and demonstrate its potential to resolve distinct properties of white matter fiber tracts at the sub-voxel level. The sequence was designed and optimized for maximal MT contrast efficiency. The resulting whole brain 2.6 mm isotropic protocol to measure tract-specific MT ratio (MTR) has a scan time under 7 m…
▽ More
We present a novel dual-encoded magnetization transfer (MT) and diffusion-weighted sequence and demonstrate its potential to resolve distinct properties of white matter fiber tracts at the sub-voxel level. The sequence was designed and optimized for maximal MT contrast efficiency. The resulting whole brain 2.6 mm isotropic protocol to measure tract-specific MT ratio (MTR) has a scan time under 7 minutes. Ten healthy subjects were scanned twice to assess repeatability. Two different analysis methods were contrasted: a technique to extract tract-specific MTR using Convex Optimization Modeling for Microstructure Informed Tractography (COMMIT), a global optimization technique; and conventional MTR tractometry. The results demonstrate that the tract-specific method can reliably resolve the MT ratios of major white matter fiber pathways and is less affected by partial volume effects than conventional multi-modal tractometry. Dual-encoded MT and diffusion is expected to both increase the sensitivity to microstructure alterations of specific tracts due to disease, ageing or learning, as well as lead to weighted structural connectomes with more anatomical specificity.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Optimization of acquisition parameters for cortical inhomogeneous magnetization transfer (ihMT) imaging using a rapid gradient echo readout
Authors:
Christopher D. Rowley,
Jennifer S. W. Campbell,
Ilana R. Leppert,
Mark C. Nelson,
G. Bruce Pike,
Christine L. Tardif
Abstract:
Purpose: Imaging biomarkers with increased myelin specificity are needed to better understand the complex progression of neurological disorders. Inhomogeneous magnetization transfer (ihMT) imaging is an emergent technique that has a high degree of specificity for myelin content but suffers from low signal-to-noise ratio (SNR). This study used simulations to determine optimal sequence parameters fo…
▽ More
Purpose: Imaging biomarkers with increased myelin specificity are needed to better understand the complex progression of neurological disorders. Inhomogeneous magnetization transfer (ihMT) imaging is an emergent technique that has a high degree of specificity for myelin content but suffers from low signal-to-noise ratio (SNR). This study used simulations to determine optimal sequence parameters for ihMT imaging for use in high-resolution cortical mapping. Methods: MT-weighted cortical image intensity and ihMT SNR were simulated using modified Bloch equations for a range of sequence parameters. The acquisition time was limited to 4.5 min/volume. A custom MT-weighted RAGE sequence with center-out k-space encoding was used to enhance SNR at 3 Tesla. Pulsed MT imaging was studied over a range of saturation parameters and the impact of the turbo-factor on effective ihMT was investigated. 1 mm isotropic ihMTsat maps were generated in 25 healthy adults using an optimized protocol. Results: Greater SNR was observed for larger number of bursts consisting of 6-8 saturation pulses each, combined with a high readout turbo-factor. However, that protocol suffered from a point spread function that was more than twice the nominal resolution. For high-resolution cortical imaging, we selected a protocol with a higher effective resolution at the cost of a lower SNR. We present the first group-average ihMTsat whole-brain map at 1 mm isotropic resolution. Conclusion: This study presents the impact of saturation and excitation parameters on ihMTsat SNR and resolution. We demonstrate the feasibility of high-resolution cortical myelin imaging using ihMTsat in less than 20 minutes.
△ Less
Submitted 9 June, 2023; v1 submitted 14 February, 2023;
originally announced February 2023.
-
HL-LHC Computing Review Stage-2, Common Software Projects: Event Generators
Authors:
The HSF Physics Event Generator WG,
:,
Efe Yazgan,
Josh McFayden,
Andrea Valassi,
Simone Amoroso,
Enrico Bothmann,
Andy Buckley,
John Campbell,
Gurpreet Singh Chahal,
Taylor Childers,
Gloria Corti,
Rikkert Frederix,
Stefano Frixione,
Francesco Giuli,
Alexander Grohsjean,
Stefan Hoeche,
Phil Ilten,
Frank Krauss,
Michal Kreps,
David Lange,
Leif Lonnblad,
Zach Marshall,
Olivier Mattelaer,
Stephen Mrenna
, et al. (14 additional authors not shown)
Abstract:
This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper…
▽ More
This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper on the specific challenges in Monte Carlo event generator software for HL-LHC, which has since been updated and published, and which we are also submitting to the November 2021 review as an integral part of our contribution.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Characterization of Muon and Electron Beams in the Paul Scherrer Institute PiM1 Channel for the MUSE Experiment
Authors:
E. Cline,
W. Lin,
P. Roy,
P. E. Reimer,
K. E. Mesick,
A. Akmal,
A. Alie,
H. Atac,
A. Atencio,
C. Ayerbe Gayoso,
N. Benmouna,
F. Benmokhtar,
J. C. Bernauer,
W. J. Briscoe,
J. Campbell,
D. Cohen,
E. O. Cohen,
C. Collicott,
K. Deiters,
S. Dogra,
E. Downie,
I. P. Fernando,
A. Flannery,
T. Gautam,
D. Ghosal
, et al. (35 additional authors not shown)
Abstract:
The MUon Scattering Experiment, MUSE, at the Paul Scherrer Institute, Switzerland, investigates the proton charge radius puzzle, lepton universality, and two-photon exchange, via simultaneous measurements of elastic muon-proton and electron-proton scattering. The experiment uses the PiM1 secondary beam channel, which was designed for high precision pion scattering measurements. We review the prope…
▽ More
The MUon Scattering Experiment, MUSE, at the Paul Scherrer Institute, Switzerland, investigates the proton charge radius puzzle, lepton universality, and two-photon exchange, via simultaneous measurements of elastic muon-proton and electron-proton scattering. The experiment uses the PiM1 secondary beam channel, which was designed for high precision pion scattering measurements. We review the properties of the beam line established for pions. We discuss the production processes that generate the electron and muon beams, and the simulations of these processes. Simulations of the $π$/$μ$/$e$ beams through the channel using TURTLE and G4beamline are compared. The G4beamline simulation is then compared to several experimental measurements of the channel, including the momentum dispersion at the IFP and target, the shape of the beam spot at the target, and timing measurements that allow the beam momenta to be determined. We conclude that the PiM1 channel can be used for high precision $π$, $μ$, and $e$ scattering.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Simple Formulas for Output Interception Power Estimation of Uni-Traveling Carrier Photodiodes
Authors:
Keye Sun,
Junyi Gao,
Yuan Yuan,
Joe. C. Campbell,
Andreas. Beling
Abstract:
Simple analytical expressions for estimation of second order output intercept point (OIP2) and third order output intercept point (OIP3) of surface normal uni-traveling carrier (UTC) and modified uni-traveling carrier (MUTC) photodiode (PD) are derived. These equations are valuable for estimation of OIP for high power (M)UTC-PDs during the design phase.
Simple analytical expressions for estimation of second order output intercept point (OIP2) and third order output intercept point (OIP3) of surface normal uni-traveling carrier (UTC) and modified uni-traveling carrier (MUTC) photodiode (PD) are derived. These equations are valuable for estimation of OIP for high power (M)UTC-PDs during the design phase.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
Dynamic-quenching of a single-photon avalanche photodetector using an adaptive resistive switch
Authors:
Jiyuan Zheng,
Cheng Ji,
Xingjun Xue,
Yuan Yuan,
Keye Sun,
Daniel Rosenmann,
Lai Wang,
Jiamin Wu,
Joe C. Campbell,
Supratik Guha
Abstract:
One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replac…
▽ More
One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replacing a fixed quenching resistor with a bias-dependent adaptive resistive switch. Reversible generation of metallic conduction enables switching between low and high resistance states under unipolar bias. As an example, using a Pt/Al2O3/Ag resistor with a commercial silicon single-photon avalanche diodes, we demonstrate avalanche pulse widths as small as ~30 ns, 10x smaller than a passively quenched approach, thus significantly improving the single-photon avalanche diodes frequency response. The experimental results are consistent with a model where the adaptive resistor dynamically changes its resistance during discharging and recharging the single-photon avalanche diodes.
△ Less
Submitted 1 April, 2022; v1 submitted 22 May, 2021;
originally announced May 2021.
-
A Physics Based Multiscale Compact Model of p-i-n Avalanche Photodiodes
Authors:
Sheikh Z. Ahmed,
Samiran Ganguly,
Yuan Yuan,
Jiyuan Zheng,
Yaohua Tan,
Joe C. Campbell,
Avik W. Ghosh
Abstract:
III-V material based digital alloy Avalanche Photodiodes (APDs) have recently been found to exhibit low noise similar to Silicon APDs. The III-V materials can be chosen to operate at any wavelength in the infrared spectrum. In this work, we present a physics-based SPICE compatible compact model for APDs built from parameters extracted from an Environment-Dependent Tight Binding (EDTB) model calibr…
▽ More
III-V material based digital alloy Avalanche Photodiodes (APDs) have recently been found to exhibit low noise similar to Silicon APDs. The III-V materials can be chosen to operate at any wavelength in the infrared spectrum. In this work, we present a physics-based SPICE compatible compact model for APDs built from parameters extracted from an Environment-Dependent Tight Binding (EDTB) model calibrated to ab-initio Density Functional Theory (DFT) and Monte Carlo (MC) methods. Using this approach, we can accurately capture the physical characteristics of these APDs in integrated photonics circuit simulations.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
The LUX-ZEPLIN (LZ) radioactivity and cleanliness control programs
Authors:
D. S. Akerib,
C. W. Akerlof,
D. Yu. Akimov,
A. Alquahtani,
S. K. Alsum,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
A. Arbuckle,
J. E. Armstrong,
M. Arthurs,
H. Auyeung,
S. Aviles,
X. Bai,
A. J. Bailey,
J. Balajthy,
S. Balashov,
J. Bang,
M. J. Barry,
D. Bauer,
P. Bauer,
A. Baxter,
J. Belle,
P. Beltrame,
J. Bensinger
, et al. (365 additional authors not shown)
Abstract:
LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherent…
▽ More
LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherently low radioactivity content. The LZ collaboration performed an extensive radioassay campaign over a period of six years to inform material selection for construction and provide an input to the experimental background model against which any possible signal excess may be evaluated. The campaign and its results are described in this paper. We present assays of dust and radon daughters depositing on the surface of components as well as cleanliness controls necessary to maintain background expectations through detector construction and assembly. Finally, examples from the campaign to highlight fixed contaminant radioassays for the LZ photomultiplier tubes, quality control and quality assurance procedures through fabrication, radon emanation measurements of major sub-systems, and bespoke detector systems to assay scintillator are presented.
△ Less
Submitted 28 February, 2022; v1 submitted 3 June, 2020;
originally announced June 2020.
-
Field Evaluation of Column CO2 Retrievals from Intensity-Modulated Continuous-Wave Differential Absorption Lidar Measurements during ACT-America
Authors:
Joel F. Campbell,
Bing Lin,
Michael D. Obland,
Jeremy Dobler,
Wayne Erxleben,
Doug McGregor,
Chris O'Dell,
Emily Bell,
Sandip Pal,
Brad Weir,
Tai-Fang Fan,
Susan Kooi,
Abigail Corbett,
Kenneth Davis,
Iouli Gordon,
Roman Kochanov
Abstract:
We present an evaluation of airborne Intensity-Modulated Continuous-Wave (IM-CW) lidar measurements of atmospheric column CO2 mole fractions during the ACT-America project. This lidar system transmits online and offline wavelengths simultaneously on the 1.57111-um CO2 absorption line, with each modulated wavelength using orthogonal swept frequency waveforms. After the spectral characteristics of t…
▽ More
We present an evaluation of airborne Intensity-Modulated Continuous-Wave (IM-CW) lidar measurements of atmospheric column CO2 mole fractions during the ACT-America project. This lidar system transmits online and offline wavelengths simultaneously on the 1.57111-um CO2 absorption line, with each modulated wavelength using orthogonal swept frequency waveforms. After the spectral characteristics of this system were calibrated through short-path measurements, we used the HITRAN spectroscopic database to derive the average-column CO2 mixing ratio (XCO2) from the lidar measured optical depths. Based on in situ measurements of meteorological parameters and CO2 concentrations for calibration data, we demonstrate that our lidar CO2 measurements were consistent from season to season and had an absolute calibration error (standard deviation) of 0.80 ppm when compared to XCO2 values derived from in situ measurements. By using a 10-second or longer moving average, a long-term stability of 1 ppm or better was obtained. The estimated CO2 measurement precision for 0.1-s, 1-s, 10-s, and 60-s averages were determined to be 3.4 ppm (0.84%), 1.2 ppm (0.30%), 0.43 ppm (0.10%), and 0.26 ppm (0.063%), respectively. These correspond to measurement signal-to-noise ratios of 120, 330, 950, and 1600, respectively. The drift in XCO2 over one-hour of flight time was found to be below our detection limit of about 0.1 ppm. These analyses demonstrate that the measurement stability, precision and accuracy are all well below the thresholds needed to study synoptic-scale variations in atmospheric XCO2.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Coherent Optical Clock Down-Conversion for Microwave Frequencies with 10-18 Instability
Authors:
Takuma Nakamura,
Josue Davila-Rodriguez,
Holly Leopardi,
Jeff A. Sherman,
Tara M. Fortier,
Xiaojun Xie,
Joe C. Campbell,
William F. McGrew,
Xiaogang Zhang,
Youssef S. Hassan,
Daniele Nicolodi,
Kyle Beloy,
Andrew D. Ludlow,
Scott A. Diddams,
Franklyn Quinlan
Abstract:
Optical atomic clocks are poised to redefine the SI second, thanks to stability and accuracy more than one hundred times better than the current microwave atomic clock standard. However, the best optical clocks have not seen their performance transferred to the electronic domain, where radar, navigation, communications, and fundamental research rely on less stable microwave sources. By comparing t…
▽ More
Optical atomic clocks are poised to redefine the SI second, thanks to stability and accuracy more than one hundred times better than the current microwave atomic clock standard. However, the best optical clocks have not seen their performance transferred to the electronic domain, where radar, navigation, communications, and fundamental research rely on less stable microwave sources. By comparing two independent optical-to-electronic signal generators, we demonstrate a 10 GHz microwave signal with phase that exactly tracks that of the optical clock phase from which it is derived, yielding an absolute fractional frequency instability of 1*10-18 in the electronic domain. Such faithful reproduction of the optical clock phase expands the opportunities for optical clocks both technologically and scientifically for time-dissemination, navigation, and long-baseline interferometric imaging.
△ Less
Submitted 9 March, 2020; v1 submitted 5 March, 2020;
originally announced March 2020.
-
The LUX-ZEPLIN (LZ) Experiment
Authors:
The LZ Collaboration,
D. S. Akerib,
C. W. Akerlof,
D. Yu. Akimov,
A. Alquahtani,
S. K. Alsum,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
A. Arbuckle,
J. E. Armstrong,
M. Arthurs,
H. Auyeung,
X. Bai,
A. J. Bailey,
J. Balajthy,
S. Balashov,
J. Bang,
M. J. Barry,
J. Barthel,
D. Bauer,
P. Bauer,
A. Baxter,
J. Belle,
P. Beltrame
, et al. (357 additional authors not shown)
Abstract:
We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient n…
▽ More
We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient neutron capture and tagging. LZ is located in the Davis Cavern at the 4850' level of the Sanford Underground Research Facility in Lead, South Dakota, USA. We describe the major subsystems of the experiment and its key design features and requirements.
△ Less
Submitted 3 November, 2019; v1 submitted 20 October, 2019;
originally announced October 2019.
-
Generalized Regular k-point Grid Generation On The Fly
Authors:
Wiley S. Morgan,
John E. Christensen,
Parker K. Hamilton,
Jeremy J. Jorgensen,
Branton J. Campbell,
Gus L. W. Hart,
Rodney W. Forcade
Abstract:
In the DFT community, it is common practice to use regular k-point grids (Monkhorst-Pack, MP) for Brillioun zone integration. Recently Wisesa et. al.\cite{wisesa2016efficient} and Morgan et. al.\cite{MORGAN2018424} demonstrated that generalized regular (GR) grids offer advantages over traditional MP grids. GR grids have not been widely adopted because one must search through a large number of cand…
▽ More
In the DFT community, it is common practice to use regular k-point grids (Monkhorst-Pack, MP) for Brillioun zone integration. Recently Wisesa et. al.\cite{wisesa2016efficient} and Morgan et. al.\cite{MORGAN2018424} demonstrated that generalized regular (GR) grids offer advantages over traditional MP grids. GR grids have not been widely adopted because one must search through a large number of candidate grids. This work describes an algorithm that can quickly search over GR grids for those that have the most uniform distribution of points and the best symmetry reduction. The grids are ~60% more efficient, on average, than MP grids and can now be generated on the fly in seconds.
△ Less
Submitted 8 February, 2019;
originally announced February 2019.
-
Density Changes in Low Pressure Gas Targets for Electron Scattering Experiments
Authors:
S. N. Santiesteban,
S. Alsalmi,
D. Meekins,
J. Bane,
S. Barcus,
J. Campbell,
J. Castellanos,
R. Cruz-Torres,
H. Dai,
T. Hague,
F. Hauenstein,
D. W. Higinbotham,
R. J. Holt,
T. Kutz,
S. Li,
H. Liu,
R. E. McClellan,
M. Nycz,
D. Nguyen,
B. Pandey,
V. Pandey,
A. Schmidt,
T. Su,
Z. Ye
Abstract:
A system of modular sealed gas target cells has been developed for use in electron scattering experiments at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). This system was initially developed to complete the MARATHON experiment which required, among other species, tritium as a target material. Thus far, the cells have been loaded with the gas species 3H, 3He, 2H, 1H and 40Ar a…
▽ More
A system of modular sealed gas target cells has been developed for use in electron scattering experiments at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). This system was initially developed to complete the MARATHON experiment which required, among other species, tritium as a target material. Thus far, the cells have been loaded with the gas species 3H, 3He, 2H, 1H and 40Ar and operated in nominal beam currents of up to 22.5 uA in Jefferson Lab's Hall A. While the gas density of the cells at the time of loading is known, the density of each gas varies uniquely when heated by the electron beam. To extract experimental cross sections using these cells, density dependence on beam current of each target fluid must be determined. In this study, data from measurements with several beam currents within the range of 2.5 to 22.5 uA on each target fluid are presented. Additionally, expressions for the beam current dependent fluid density of each target are developed.
△ Less
Submitted 14 May, 2019; v1 submitted 26 November, 2018;
originally announced November 2018.
-
Optimizing the linearity in high-speed photodiodes
Authors:
J. Davila-Rodriguez,
X. Xie,
J. Zang,
C. J. Long,
T. M. Fortier,
H. Leopardi,
T. Nakamura,
J. C. Campbell,
S. A. Diddams,
F. Quinlan
Abstract:
Analog photonic links require high-fidelity, high-speed optical-to-electrical conversion for applications such as radio-over-fiber, synchronization at kilometer-scale facilities, and low-noise electronic signal generation. Photodetector nonlinearity is a particularly vexing problem, causing signal distortion and excess noise, especially in systems utilizing ultrashort optical pulses. Here we show…
▽ More
Analog photonic links require high-fidelity, high-speed optical-to-electrical conversion for applications such as radio-over-fiber, synchronization at kilometer-scale facilities, and low-noise electronic signal generation. Photodetector nonlinearity is a particularly vexing problem, causing signal distortion and excess noise, especially in systems utilizing ultrashort optical pulses. Here we show that photodetectors designed for high power handling and high linearity can perform optical-to-electrical conversion of ultrashort optical pulses with unprecedented linearity over a large photocurrent range. We also show that the broadband, complex impedance of the circuit following the photodiode modifies the linearity significantly. By externally manipulating the circuit impedance, we extend the detector's linear range to higher photocurrents, with over 50 dB rejection of amplitude-to-phase conversion for photocurrents up to 40 mA. This represents a 1000-fold improvement over state-of-the-art photodiodes and significantly extends the attainable microwave power by a factor of four. As such, we eliminate the long-standing requirement in ultrashort pulse detection of precise tuning of the photodiode's operating parameters (average photocurrent, bias voltage or temperature) to coincide with a nonlinearity minimum. These results should also apply more generally to reduce nonlinear distortion in a range of other microwave photonics applications.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
Computational Study of Amplitude-to-Phase Conversion in a Modified Uni-Traveling Carrier (MUTC) Photodetector
Authors:
Yue Hu,
Curtis R. Menyuk,
Xiaojun Xie,
Meredith N. Hutchinson,
Vincent J. Urick,
Joe C. Campbell,
Keith J. Williams
Abstract:
We calculate the amplitude-to-phase (AM-to-PM) noise conversion in a modified unitraveling carrier (MUTC) photodetector. We obtained two nulls as measured in the experiments, and we explain their origin. The nulls appear due to the transit time variation when the average photocurrent varies, and the transit time variation is due to the change of electron velocity when the average photocurrent vari…
▽ More
We calculate the amplitude-to-phase (AM-to-PM) noise conversion in a modified unitraveling carrier (MUTC) photodetector. We obtained two nulls as measured in the experiments, and we explain their origin. The nulls appear due to the transit time variation when the average photocurrent varies, and the transit time variation is due to the change of electron velocity when the average photocurrent varies. We also show that the AM-to-PM conversion coefficient depends only on the pulse energy and is independent of the pulse duration when the duration is less than 500 fs. When the pulse duration is larger than 500 fs, the nulls of the AM-to-PM conversion coefficient shift to larger average photocurrents. This shift occurs because the increase in that pulse duration leads to a decrease in the peak photocurrent. The AM-to-PM noise conversion coefficient changes as the repetition rate varies. However, the repetition rate does not change the AM-to-PM conversion coefficient as a function of input optical pulse energy. The repetition rate changes the average photocurrent. We propose a design that would in theory improve the performance of the device.
△ Less
Submitted 22 February, 2017;
originally announced February 2017.
-
Promise and pitfalls of g-ratio estimation with MRI
Authors:
Jennifer S. W. Campbell,
Ilana R. Leppert,
Mathieu Boudreau,
Sridar Narayanan,
Tanguy Duval,
Julien Cohen-Adad,
G. Bruce Pike,
Nikola Stikov
Abstract:
The fiber g-ratio is the ratio of the inner to the outer diameter of the myelin sheath of a myelinated axon. It has a limited dynamic range in healthy white matter, as it is optimized for speed of signal conduction, cellular energetics, and spatial constraints. In vivo imaging of the g-ratio in health and disease would greatly increase our knowledge of the nervous system and our ability to diagnos…
▽ More
The fiber g-ratio is the ratio of the inner to the outer diameter of the myelin sheath of a myelinated axon. It has a limited dynamic range in healthy white matter, as it is optimized for speed of signal conduction, cellular energetics, and spatial constraints. In vivo imaging of the g-ratio in health and disease would greatly increase our knowledge of the nervous system and our ability to diagnose, monitor, and treat disease. MRI based g-ratio imaging was first conceived in 2011, and expanded to be feasible in full brain with preliminary results in 2013. This manuscript reviews the growing g-ratio imaging literature and speculates on future applications. It details the methodology for imaging the g-ratio with MRI, and describes the known pitfalls and challenges in doing so.
△ Less
Submitted 25 August, 2017; v1 submitted 10 January, 2017;
originally announced January 2017.
-
Universal Darwinism as a process of Bayesian inference
Authors:
John O. Campbell
Abstract:
Many of the mathematical frameworks describing natural selection are equivalent to Bayes Theorem, also known as Bayesian updating. By definition, a process of Bayesian Inference is one which involves a Bayesian update, so we may conclude that these frameworks describe natural selection as a process of Bayesian inference. Thus natural selection serves as a counter example to a widely-held interpret…
▽ More
Many of the mathematical frameworks describing natural selection are equivalent to Bayes Theorem, also known as Bayesian updating. By definition, a process of Bayesian Inference is one which involves a Bayesian update, so we may conclude that these frameworks describe natural selection as a process of Bayesian inference. Thus natural selection serves as a counter example to a widely-held interpretation that restricts Bayesian Inference to human mental processes (including the endeavors of statisticians). As Bayesian inference can always be cast in terms of (variational) free energy minimization, natural selection can be viewed as comprising two components: a generative model of an "experiment" in the external world environment, and the results of that "experiment" or the "surprise" entailed by predicted and actual outcomes of the "experiment". Minimization of free energy implies that the implicit measure of "surprise" experienced serves to update the generative model in a Bayesian manner. This description closely accords with the mechanisms of generalized Darwinian process proposed both by Dawkins, in terms of replicators and vehicles, and Campbell, in terms of inferential systems. Bayesian inference is an algorithm for the accumulation of evidence-based knowledge. This algorithm is now seen to operate over a wide range of evolutionary processes, including natural selection, the evolution of mental models and cultural evolutionary processes, notably including science itself. The variational principle of free energy minimization may thus serve as a unifying mathematical framework for universal Darwinism, the study of evolutionary processes operating throughout nature.
△ Less
Submitted 25 June, 2016;
originally announced June 2016.
-
An open reproducible framework for the study of the iterated prisoner's dilemma
Authors:
Vincent Knight,
Owen Campbell,
Marc Harper,
Karol Langner,
James Campbell,
Thomas Campbell,
Alex Carney,
Martin Chorley,
Cameron Davidson-Pilon,
Kristian Glass,
Nikoleta Glynatsi,
Tomáš Ehrlich,
Martin Jones,
Georgios Koutsovoulos,
Holly Tibble,
Müller Jochen,
Geraint Palmer,
Piotr Petunov,
Paul Slavin,
Timothy Standen,
Luis Visintini,
Karl Molden
Abstract:
The Axelrod library is an open source Python package that allows for reproducible game theoretic research into the Iterated Prisoner's Dilemma. This area of research began in the 1980s but suffers from a lack of documentation and test code. The goal of the library is to provide such a resource, with facilities for the design of new strategies and interactions between them, as well as conducting to…
▽ More
The Axelrod library is an open source Python package that allows for reproducible game theoretic research into the Iterated Prisoner's Dilemma. This area of research began in the 1980s but suffers from a lack of documentation and test code. The goal of the library is to provide such a resource, with facilities for the design of new strategies and interactions between them, as well as conducting tournaments and ecological simulations for populations of strategies.
With a growing collection of 139 strategies, the library is a also a platform for an original tournament that, in itself, is of interest to the game theoretic community. This paper describes the Iterated Prisoner's Dilemma, the Axelrod library and its development, and insights gained from some novel research.
△ Less
Submitted 20 December, 2016; v1 submitted 4 April, 2016;
originally announced April 2016.
-
Digital-photonic synthesis of ultra-low noise tunable signals from RF to 100 GHz
Authors:
T. M. Fortier,
A. Rolland,
F. Quinlan,
F. N. Baynes,
A. J. Metcalf,
A. Hati,
A. Ludlow,
N. Hinkley,
M. Shimizu,
T. Ishibashi,
J. C. Campbell,
S. A. Diddams
Abstract:
The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telec…
▽ More
The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telecommunications, high precision measurement, and radar and sensing. Here we describe a digital-photonic synthesizer (DPS) based on optical frequency division that enables the generation of widely tunable signals from near DC to 100 GHz with a fractional frequency instability of 1 part in 10^15. The spectral purity of the DPS derived signals represents an improvement in close-to-carrier noise performance over the current state-of-the-art of nearly 7 orders of magnitude in the W-band (100 GHz), and up to 5 orders of magnitude in the X-band (10 GHz).
△ Less
Submitted 10 June, 2015;
originally announced June 2015.
-
A Multi-Threaded Version of MCFM
Authors:
John M. Campbell,
R. Keith Ellis,
Walter T. Giele
Abstract:
We report on our findings modifying MCFM using OpenMP to implement multi-threading. By using OpenMP, the modified MCFM will execute on any processor, automatically adjusting to the number of available threads. We modified the integration routine VEGAS to distribute the event evaluation over the threads, while combining all events at the end of every iteration to optimize the numerical integration.…
▽ More
We report on our findings modifying MCFM using OpenMP to implement multi-threading. By using OpenMP, the modified MCFM will execute on any processor, automatically adjusting to the number of available threads. We modified the integration routine VEGAS to distribute the event evaluation over the threads, while combining all events at the end of every iteration to optimize the numerical integration. Special care has been taken that the results of the Monte Carlo integration are independent of the number of threads used, to facilitate the validation of the OpenMP version of MCFM.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Attosecond Timing in Optical-to-Electrical Conversion
Authors:
Fred N. Baynes,
Franklyn Quinlan,
Tara Fortier,
Qiugui Zhou,
Andreas Beling,
Joe C. Campbell,
Scott A. Diddams
Abstract:
The most frequency-stable sources of electromagnetic radiation are produced optically, and optical frequency combs provide the means for high fidelity frequency transfer across hundreds of terahertz and into the microwave domain. A critical step in this photonic-based synthesis of microwave signals is the optical-to-electrical conversion process. Here we show that attosecond (as) timing stability…
▽ More
The most frequency-stable sources of electromagnetic radiation are produced optically, and optical frequency combs provide the means for high fidelity frequency transfer across hundreds of terahertz and into the microwave domain. A critical step in this photonic-based synthesis of microwave signals is the optical-to-electrical conversion process. Here we show that attosecond (as) timing stability can be preserved across the opto-electronic interface of a photodiode, despite an intrinsic temporal response that is more than six orders of magnitude slower. The excess timing noise in the photodetection of a periodic train of ultrashort optical pulses behaves as flicker noise (1/f) with amplitude of 4 as/Sqrt(Hz) at 1 Hz offset. The corresponding fractional frequency fluctuations are 1.4x10-17 at 1 second and 5.5x10-20 at 1000 seconds. These results demonstrate that direct photodetection, as part of frequency-comb-based microwave synthesis, can support the timing performance of the best optical frequency standards, and thereby opens the possibility for generating microwave signals with significantly better stability than any existing source.
△ Less
Submitted 6 January, 2015; v1 submitted 27 October, 2014;
originally announced October 2014.
-
Optical amplification and pulse interleaving for low noise photonic microwave generation
Authors:
Franklyn Quinlan,
Fred N. Baynes,
Tara M. Fortier,
Qiugui Zhou,
Allen Cross,
Joe C. Campbell,
Scott A. Diddams
Abstract:
We investigate the impact of pulse interleaving and optical amplification on the spectral purity of microwave signals generated by photodetecting the pulsed output of an Er:fiber-based optical frequency comb. It is shown that the microwave phase noise floor can be extremely sensitive to delay length errors in the interleaver, and the contribution of the quantum noise from optical amplification to…
▽ More
We investigate the impact of pulse interleaving and optical amplification on the spectral purity of microwave signals generated by photodetecting the pulsed output of an Er:fiber-based optical frequency comb. It is shown that the microwave phase noise floor can be extremely sensitive to delay length errors in the interleaver, and the contribution of the quantum noise from optical amplification to the phase noise can be reduced ~10 dB for short pulse detection. We exploit optical amplification, in conjunction with high power handling modified uni-traveling carrier photodetectors, to generate a phase noise floor on a 10 GHz carrier of -175 dBc/Hz, the lowest ever demonstrated in the photodetection of a mode-locked fiber laser. At all offset frequencies, the photodetected 10 GHz phase noise performance is comparable to or better than the lowest phase noise results yet demonstrated with stabilized Ti:sapphire frequency combs.
△ Less
Submitted 6 December, 2013;
originally announced December 2013.
-
Advanced sine wave modulation of continuous wave laser system for atmospheric CO2 differential absorption measurements
Authors:
Joel F. Campbell,
Bing Lin,
Amin R. Nehrir
Abstract:
In this theoretical study, modulation techniques are developed to support the Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) mission. A CW lidar system using sine waves modulated by ML pseudo random noise codes is described for making simultaneous online/offline differential absorption measurements. Amplitude and Phase Shift Keying (PSK) modulated IM carriers, in addition…
▽ More
In this theoretical study, modulation techniques are developed to support the Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) mission. A CW lidar system using sine waves modulated by ML pseudo random noise codes is described for making simultaneous online/offline differential absorption measurements. Amplitude and Phase Shift Keying (PSK) modulated IM carriers, in addition to a hybrid pulse technique are investigated that exhibit optimal autocorrelation properties. A method is presented to bandwidth limit the ML sequence based on a filter implemented in terms of Jacobi theta functions that does not significantly degrade the resolution or introduce side lobes as a means of reducing aliasing and IM carrier bandwidth.
△ Less
Submitted 4 January, 2014; v1 submitted 13 September, 2013;
originally announced September 2013.
-
Collision and Diffusion in Microwave Breakdown of Nitrogen Gas in and around Microgaps
Authors:
J. D. Campbell,
A. Bowman III,
G. T. Lenters,
S. K. Remillard
Abstract:
The microwave induced breakdown of N2 gas in microgaps was modeled using the collision frequency between electrons and neutral molecules and the effective electric field concept. Low pressure breakdown at the threshold electric field occurs outside the gap, but at high pressures it is found to occur inside the microgap with a large threshold breakdown electric field corresponding to a very large e…
▽ More
The microwave induced breakdown of N2 gas in microgaps was modeled using the collision frequency between electrons and neutral molecules and the effective electric field concept. Low pressure breakdown at the threshold electric field occurs outside the gap, but at high pressures it is found to occur inside the microgap with a large threshold breakdown electric field corresponding to a very large electron oscillation amplitude. Three distinct pressure regimes are apparent in the microgap breakdown: a low pressure multipactor branch, a mid-pressure Paschen branch, both of which occur in the space outside the microgap, and a high pressure diffusion-drift branch, which occurs inside the microgap. The Paschen and diffusion-drift branches are divided by a sharp transition and each separately fits the collision frequency model. There is evidence that considerable electron loss to the microgap faces accompanies the diffusion-drift branch in microgaps.
△ Less
Submitted 29 November, 2013; v1 submitted 9 August, 2013;
originally announced August 2013.
-
Magnetic dipole and electric quadrupole moments of the 229Th nucleus
Authors:
M. S. Safronova,
U. I. Safronova,
A. G. Radnaev,
C. J. Campbell,
A. Kuzmich
Abstract:
We calculate the A and B hyperfine constants for the low-lying states of 229Th3+ using a high-precision relativistic all-order approach. By combining these calculations with measurements of the 6d and 5f hyperfine constants [C. J. Campbell et al., Phys. Rev. Lett. 106, 223001 (2011)], we determine the magnetic dipole μ=0.360(7)μ_B and the electric-quadrupole Q=3.11(6) eb moments of the 229Th nucle…
▽ More
We calculate the A and B hyperfine constants for the low-lying states of 229Th3+ using a high-precision relativistic all-order approach. By combining these calculations with measurements of the 6d and 5f hyperfine constants [C. J. Campbell et al., Phys. Rev. Lett. 106, 223001 (2011)], we determine the magnetic dipole μ=0.360(7)μ_B and the electric-quadrupole Q=3.11(6) eb moments of the 229Th nucleus. Our value for μis five times more accurate and is 22% smaller than the best previous value μ=0.46(4) μ_B [S. Gerstenkorn et al., J. Phys. (Paris) 35, 483 (1974)], while our value for Q is the same, but 2.5 times more accurate than the 2011 result. A systematic study of hyperfine structure in eight other monovalent atoms supports our claim of 2% level uncertainty for $μ$ and Q in 229Th+3.
△ Less
Submitted 3 May, 2013;
originally announced May 2013.
-
Non-linear swept frequency technique for CO2 measurements using a CW laser system
Authors:
Joel F. Campbell
Abstract:
A system using a non-linear multi-swept sine wave system is described which employs a multi-channel, multi-swept orthogonal waves, to separate channels and make multiple, simultaneous online/offline CO2 measurements. An analytic expression and systematic method for determining the orthogonal frequencies for the unswept, linear swept and non-linear swept cases is presented. It is shown that one may…
▽ More
A system using a non-linear multi-swept sine wave system is described which employs a multi-channel, multi-swept orthogonal waves, to separate channels and make multiple, simultaneous online/offline CO2 measurements. An analytic expression and systematic method for determining the orthogonal frequencies for the unswept, linear swept and non-linear swept cases is presented. It is shown that one may reduce sidelobes of the autocorrelation function while preserving cross channel orthogonality, for thin cloud rejection.
△ Less
Submitted 20 March, 2013;
originally announced March 2013.
-
Photonic microwave generation with high-power photodiodes
Authors:
Tara M. Fortier,
Franklyn Quinlan,
Archita Hati,
Craig Nelson,
Jennifer A. Taylor,
Yang Fu,
Joe Campbell,
Scott A. Diddams
Abstract:
We utilize and characterize high-power, high-linearity modified uni-traveling carrier (MUTC) photodiodes for low-phase-noise photonic microwave generation based on optical frequency division. When illuminated with picosecond pulses from a repetition-rate-multiplied gigahertz Ti:sapphire modelocked laser, the photodiodes can achieve 10 GHz signal power of +14 dBm. Using these diodes, a 10 GHz micro…
▽ More
We utilize and characterize high-power, high-linearity modified uni-traveling carrier (MUTC) photodiodes for low-phase-noise photonic microwave generation based on optical frequency division. When illuminated with picosecond pulses from a repetition-rate-multiplied gigahertz Ti:sapphire modelocked laser, the photodiodes can achieve 10 GHz signal power of +14 dBm. Using these diodes, a 10 GHz microwave tone is generated with less than 500 attoseconds absolute integrated timing jitter (1 Hz-10 MHz) and a phase noise floor of -177 dBc/Hz. We also characterize the electrical response, amplitude-to-phase conversion, saturation and residual noise of the MUTC photodiodes.
△ Less
Submitted 24 February, 2013;
originally announced February 2013.
-
Observation of the 717 nm electric quadrupole transition in triply charged thorium
Authors:
A. G. Radnaev,
C. J. Campbell,
A. Kuzmich
Abstract:
We excite the 717 nm electric quadrupole 6$D_{3/2} $ $\leftrightarrow$ 7$S_{1/2}$ transition in a laser-cooled $^{232}$Th$^{3+}$ ion crystal. The transition frequency and the lifetime of the metastable 7$S_{1/2}$ level are measured to be 417 845 964(30) MHz and 0.60(7) s, respectively. We subsequently employ the 7$S_{1/2}$ level to drive the ions with nanosecond-long 269 nm laser pulses into the 7…
▽ More
We excite the 717 nm electric quadrupole 6$D_{3/2} $ $\leftrightarrow$ 7$S_{1/2}$ transition in a laser-cooled $^{232}$Th$^{3+}$ ion crystal. The transition frequency and the lifetime of the metastable 7$S_{1/2}$ level are measured to be 417 845 964(30) MHz and 0.60(7) s, respectively. We subsequently employ the 7$S_{1/2}$ level to drive the ions with nanosecond-long 269 nm laser pulses into the 7$P_{1/2}$ level. The latter is connected to the 7$S_{1/2}$ electronic level within the $^{229}$Th nuclear isomer manifold by the strongest available electron-bridge transition, forming a basis for its laser excitation.
△ Less
Submitted 27 October, 2012;
originally announced October 2012.
-
A Single-Ion Nuclear Clock for Metrology at the 19th Decimal Place
Authors:
C. J. Campbell,
A. G. Radnaev,
A. Kuzmich,
V. A. Dzuba,
V. V. Flambaum,
A. Derevianko
Abstract:
The 7.6(5) eV nuclear magnetic-dipole transition in a single 229Th3+ ion may provide the foundation for an optical clock of superb accuracy. A virtual clock transition composed of stretched states within the 5F5/2 electronic ground level of both nuclear ground and isomeric manifolds is proposed. It is shown to offer unprecedented systematic shift suppression, allowing for clock performance with a…
▽ More
The 7.6(5) eV nuclear magnetic-dipole transition in a single 229Th3+ ion may provide the foundation for an optical clock of superb accuracy. A virtual clock transition composed of stretched states within the 5F5/2 electronic ground level of both nuclear ground and isomeric manifolds is proposed. It is shown to offer unprecedented systematic shift suppression, allowing for clock performance with a total fractional inaccuracy approaching 1 x 10^-19.
△ Less
Submitted 11 October, 2011;
originally announced October 2011.
-
Wigner Crystals of 229Th for Optical Excitation of the Nuclear Isomer
Authors:
C. J. Campbell,
A. G. Radnaev,
A. Kuzmich
Abstract:
We have produced laser-cooled Wigner crystals of 229Th3+ in a linear Paul trap. The magnetic dipole (A) and electric quadrupole (B) hyperfine constants for four low-lying electronic levels and the relative isotope shifts with respect to 232Th3+ for three low-lying optical transitions are measured. Using the hyperfine B constants in conjunction with prior atomic structure calculations, a new value…
▽ More
We have produced laser-cooled Wigner crystals of 229Th3+ in a linear Paul trap. The magnetic dipole (A) and electric quadrupole (B) hyperfine constants for four low-lying electronic levels and the relative isotope shifts with respect to 232Th3+ for three low-lying optical transitions are measured. Using the hyperfine B constants in conjunction with prior atomic structure calculations, a new value of the spectroscopic nuclear electric quadrupole moment Q = 3.11(16) eb is deduced. These results are a step towards optical excitation of the low-lying isomer level in the 229Th nucleus.
△ Less
Submitted 11 October, 2011;
originally announced October 2011.
-
A Low Cost Remote Sensing System Using PC and Stereo Equipment
Authors:
Joel F. Campbell,
Michael A. Flood,
Narasimha S. Prasad,
Wade D. Hodson
Abstract:
A system using a personal computer, speaker, and a microphone is used to detect objects, and make crude measurements using a carrier modulated by a pseudorandom noise (PN) code. This system can be constructed using a personal computer and audio equipment commonly found in the laboratory or at home, or more sophisticated equipment that can be purchased at reasonable cost. We demonstrate its value a…
▽ More
A system using a personal computer, speaker, and a microphone is used to detect objects, and make crude measurements using a carrier modulated by a pseudorandom noise (PN) code. This system can be constructed using a personal computer and audio equipment commonly found in the laboratory or at home, or more sophisticated equipment that can be purchased at reasonable cost. We demonstrate its value as an instructional tool for teaching concepts of remote sensing and digital signal processing.
△ Less
Submitted 18 September, 2011; v1 submitted 10 June, 2011;
originally announced June 2011.
-
Quantum Darwinism as a Darwinian process
Authors:
John Campbell
Abstract:
The Darwinian nature of Wojciech Zurek's theory of Quantum Darwinism is evaluated against the criteria of a Darwinian process as understood within Universal Darwinism. The characteristics of a Darwinian process are developed including the consequences of accumulated adaptations resulting in adaptive systems operating in accordance with Friston's free energy principle and employing environmental…
▽ More
The Darwinian nature of Wojciech Zurek's theory of Quantum Darwinism is evaluated against the criteria of a Darwinian process as understood within Universal Darwinism. The characteristics of a Darwinian process are developed including the consequences of accumulated adaptations resulting in adaptive systems operating in accordance with Friston's free energy principle and employing environmental simulations. Quantum theory, as developed in Zurek's research program and encapsulated by his theory of Quantum Darwinism is discussed from the view that Zurek's derivation of the measurement axioms implies that the evolution of a quantum system entangled with environmental entities is determined solely by the nature of the entangled system. There need be no further logical foundation. Quantum Darwinism is found to conform to the Darwinian paradigm in unexpected detail and is thus may be considered a theory within the framework of Universal Darwinism. With the inclusion of Quantum Darwinism within Universal Darwinism and the explanatory power of Darwinian processes extended beyond biology and the social sciences to include the creation and evolution of scientific subject matter within particle physics, atomic physics and chemistry, it is suggested that Universal Darwinism may be considered a candidate 'Theory of Everything' as anticipated by David Deutsch.
△ Less
Submitted 5 January, 2010;
originally announced January 2010.
-
Bayesian Methods and Universal Darwinism
Authors:
John Campbell
Abstract:
Bayesian methods since the time of Laplace have been understood by their practitioners as closely aligned to the scientific method. Indeed a recent champion of Bayesian methods, E. T. Jaynes, titled his textbook on the subject Probability Theory: the Logic of Science. Many philosophers of science including Karl Popper and Donald Campbell have interpreted the evolution of Science as a Darwinian p…
▽ More
Bayesian methods since the time of Laplace have been understood by their practitioners as closely aligned to the scientific method. Indeed a recent champion of Bayesian methods, E. T. Jaynes, titled his textbook on the subject Probability Theory: the Logic of Science. Many philosophers of science including Karl Popper and Donald Campbell have interpreted the evolution of Science as a Darwinian process consisting of a 'copy with selective retention' algorithm abstracted from Darwin's theory of Natural Selection. Arguments are presented for an isomorphism between Bayesian Methods and Darwinian processes. Universal Darwinism, as the term has been developed by Richard Dawkins, Daniel Dennett and Susan Blackmore, is the collection of scientific theories which explain the creation and evolution of their subject matter as due to the operation of Darwinian processes. These subject matters span the fields of atomic physics, chemistry, biology and the social sciences. The principle of Maximum Entropy states that systems will evolve to states of highest entropy subject to the constraints of scientific law. This principle may be inverted to provide illumination as to the nature of scientific law. Our best cosmological theories suggest the universe contained much less complexity during the period shortly after the Big Bang than it does at present. The scientific subject matter of atomic physics, chemistry, biology and the social sciences has been created since that time. An explanation is proposed for the existence of this subject matter as due to the evolution of constraints in the form of adaptations imposed on Maximum Entropy. It is argued these adaptations were discovered and instantiated through the operations of a succession of Darwinian processes.
△ Less
Submitted 4 January, 2010;
originally announced January 2010.
-
Bright Source of Cold Ions for Surface-Electrode Traps
Authors:
Marko Cetina,
Andrew Grier,
Jonathan Campbell,
Isaac Chuang,
Vladan Vuletic
Abstract:
We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap loading rate of $4\times10^{5}$ Yb$^{+}$ ions/s exceeds that attained by photoionization (electron impact ionization) of an atomic beam by four (six) orders of magnitude. Traps as shallow as 0.13 eV are easily loaded with this technique. The…
▽ More
We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap loading rate of $4\times10^{5}$ Yb$^{+}$ ions/s exceeds that attained by photoionization (electron impact ionization) of an atomic beam by four (six) orders of magnitude. Traps as shallow as 0.13 eV are easily loaded with this technique. The ions are confined in the same spatial region as the laser-cooled atoms, which will allow the experimental investigation of interactions between cold ions and cold atoms or Bose-Einstein condensates.
△ Less
Submitted 2 February, 2007;
originally announced February 2007.
-
Shot Noise Suppression in Avalanche Photodiodes
Authors:
Feng Ma,
Shuling Wang,
Joe C. Campbell
Abstract:
We identify a new shot noise suppression mechanism in a thin (~100 nm) heterostructure avalanche photodiode. In the low-gain regime the shot noise is suppressed due to temporal correlations within amplified current pulses. We demonstrate in a Monte Carlo simulation that the effective excess noise factors can be <1, and reconcile the apparent conflict between theory and experiments. This shot noi…
▽ More
We identify a new shot noise suppression mechanism in a thin (~100 nm) heterostructure avalanche photodiode. In the low-gain regime the shot noise is suppressed due to temporal correlations within amplified current pulses. We demonstrate in a Monte Carlo simulation that the effective excess noise factors can be <1, and reconcile the apparent conflict between theory and experiments. This shot noise suppression mechanism is independent of known mechanisms such as Coulomb interaction, or reflection at heterojunction interfaces.
△ Less
Submitted 6 October, 2005;
originally announced October 2005.
