-
Threshold bounce -- occupancy-dependent modulation of the discriminating threshold in silicon detectors
Authors:
M. J. Basso,
E. Buchanan,
B. J. Gallop,
J. J. John,
J. Kaplon,
P. T. Keener,
P. W. Phillips,
L. Poley,
C. A. Sawyer,
D. Sperlich,
M. Warren
Abstract:
The front-end electronics of silicon detectors are typically designed to ensure optimal noise performance for the expected input charge. A combination of preamplifiers and shaper circuits result in a nontrivial response of the front-end to injected charge, and the magnitude of the response may be sizeable in readout windows subsequent to that in which the charge was initially injected. The modulat…
▽ More
The front-end electronics of silicon detectors are typically designed to ensure optimal noise performance for the expected input charge. A combination of preamplifiers and shaper circuits result in a nontrivial response of the front-end to injected charge, and the magnitude of the response may be sizeable in readout windows subsequent to that in which the charge was initially injected. The modulation of the discriminator threshold due to the superposition of the front-end response across multiple readout windows is coined "threshold bounce".
In this paper, we report a measurement of threshold bounce using silicon modules built for the Phase-II Upgrade of the ATLAS detector at the Large Hadron Collider. These modules utilize ATLAS Binary Chips for their hit readout. The measurement was performed using a micro-focused 15 keV photon beam at the Diamond Light Source synchrotron. The effect of the choice of photon flux and discriminator threshold on the magnitude of the threshold bounce is studied. A Monte Carlo simulation which accounts for the front-end behaviour of the silicon modules is developed, and its predicted hit efficiency is found to be in good agreement with the measured hit efficiency.
△ Less
Submitted 15 June, 2024;
originally announced June 2024.
-
Test beam measurement of ATLAS ITk Short Strip module at warm and cold operational temperature
Authors:
J. -H. Arling,
C. Becot,
E. Buchanan,
J. Dopke,
B. Gallop,
J. Kaplon,
J. S. Keller,
J. Kroll,
Y. Li,
Z. Li,
J. Liu,
Y. Liu,
S. Y. Ng,
R. Privara,
A. Renardi,
A. Rodriguez Rodriguez,
E. Rossi,
F. Ruehr,
C. Sawyer,
D. Sperlich,
A. R. Weidberg,
D. F. Zhang
Abstract:
This study is focused on an investigation of the performance of the Short Strip module developed by the ATLAS Inner Tracker (ITk) strip collaboration using electron beams of energy 5.4 GeV and 5.8 GeV at the DESY-II Testbeam Facility. The noise at +30 C and -30 C was measured. The ratio of the two measurements is compared with a circuit-model calculation. The measured noise at -30 C is compared wi…
▽ More
This study is focused on an investigation of the performance of the Short Strip module developed by the ATLAS Inner Tracker (ITk) strip collaboration using electron beams of energy 5.4 GeV and 5.8 GeV at the DESY-II Testbeam Facility. The noise at +30 C and -30 C was measured. The ratio of the two measurements is compared with a circuit-model calculation. The measured noise at -30 C is compared with the maximum noise that would correspond to an acceptable signal-to-noise ratio after the expected radiation damage from operation at HL-LHC. The measured charge distributions at +30 C and -30 C are compared with GEANT4 simulations. The detection efficiency and noise-occupancy were measured as a function of threshold at both +30 C and -30 C. The average cluster width was measured as a function of threshold. Scans of detection efficiency versus threshold at different delay settings were used to reconstruct the pulse shape in time. The resulting pulse shape was compared with a circuit model calculation.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Spatial resolution and efficiency of prototype sensors for the LHCb VELO Upgrade
Authors:
E. Buchanan,
K. Akiba,
M. van Beuzekom,
P. Collins,
E. Dall'Occo,
T. Evans,
V. Franco Lima,
R. Geertsema,
P. Kopciewicz,
E. Price,
B. Rachwal,
S. Richards,
D. Saunders,
H. Schindler,
T. Szumlak,
P. Tsopelas,
J. Velthuis,
M. R. J. Williams
Abstract:
A comprehensive study of the spatial resolution and detection efficiency of sensor prototypes developed for the LHCb VELO upgrade is presented. Data samples were collected at the CERN SPS H8 beam line using a hadron mixture of protons and pions with momenta of approximately 180 GeV/c. The sensor performance was characterised using both irradiated and non-irradiated sensors. Irradiated samples were…
▽ More
A comprehensive study of the spatial resolution and detection efficiency of sensor prototypes developed for the LHCb VELO upgrade is presented. Data samples were collected at the CERN SPS H8 beam line using a hadron mixture of protons and pions with momenta of approximately 180 GeV/c. The sensor performance was characterised using both irradiated and non-irradiated sensors. Irradiated samples were subjected to a maximum fluence of $\mathrm{8\times10^{15}~1~MeV~n_{eq}~cm^{-2}}$, of both protons and neutrons. The spatial resolution is measured comparing the detected hits to the position as predicted by tracks reconstructed by the Timepix3 telescope. The resolution is presented for different applied bias voltages and track angles, sensor thickness and implant size.
△ Less
Submitted 28 March, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
Temporal characterisation of silicon sensors on Timepix3 ASICs
Authors:
Elena Dall'Occo,
Kazu Akiba,
Martin van Beuzekom,
Emma Buchanan,
Paula Collins,
Timothy Evans,
Vinicius Franco Lima,
Robbert Geertsema,
Heinrich Schindler,
Hella Snoek,
Panagiotis Tsopelas
Abstract:
The timing performance of silicon sensors bump-bonded to Timepix3 ASICs is investigated, prior to and after different types of irradiation up to $8 \times 10^{15} 1 \mathrm{\,Me\kern -0.1em V} \mathrm{ \,n_{eq}} {\mathrm{ \,cm}}^{-2}$. The sensors have been tested with a beam of charged particles in two different configurations, perpendicular to and almost parallel to the incident beam. The second…
▽ More
The timing performance of silicon sensors bump-bonded to Timepix3 ASICs is investigated, prior to and after different types of irradiation up to $8 \times 10^{15} 1 \mathrm{\,Me\kern -0.1em V} \mathrm{ \,n_{eq}} {\mathrm{ \,cm}}^{-2}$. The sensors have been tested with a beam of charged particles in two different configurations, perpendicular to and almost parallel to the incident beam. The second approach, known as the grazing angles method, is shown to be a powerful method to investigate not only the charge collection, but also the time-to-threshold properties as a function of the depth at which the charges are liberated.
△ Less
Submitted 6 August, 2021; v1 submitted 11 February, 2021;
originally announced February 2021.
-
Charge collection properties of prototype sensors for the LHCb VELO upgrade
Authors:
R. Geertsema,
K. Akiba,
M. van Beuzekom,
E. Buchanan,
C. Burr,
W. Byczynski,
P. Collins,
E. Dall'Occo,
T. Evans,
V. Franco Lima,
K. Heijhoff,
P. Kopciewicz,
F. Marinho,
E. Price,
B. Rachwal,
S. Richards,
D. Saunders,
H. Schindler,
H. Snoek,
T. Szumlak,
P. Tsopelas,
J. Velthuis,
M. R. J. Williams
Abstract:
An extensive sensor testing campaign is presented, dedicated to measuring the charge collection properties of prototype candidates for the Vertex Locator (VELO) detector for the upgraded LHCb experiment. The charge collection is measured with sensors exposed to fluences of up to $8 \times 10^{15}~1~\mathrm{\,Me\kern -0.1em V}~ \mathrm{ \,n_{eq}}~{\mathrm{ \,cm}}^{-2}$, as well as with nonirradiate…
▽ More
An extensive sensor testing campaign is presented, dedicated to measuring the charge collection properties of prototype candidates for the Vertex Locator (VELO) detector for the upgraded LHCb experiment. The charge collection is measured with sensors exposed to fluences of up to $8 \times 10^{15}~1~\mathrm{\,Me\kern -0.1em V}~ \mathrm{ \,n_{eq}}~{\mathrm{ \,cm}}^{-2}$, as well as with nonirradiated prototypes. The results are discussed, including the influence of different levels of irradiation and bias voltage on the charge collection properties. Charge multiplication is observed on some sensors that were nonuniformly irradiated with 24 GeV protons, to the highest fluence levels. An analysis of the charge collection near the guard ring region is also presented, revealing significant differences between the sensor prototypes. All tested sensor variants succeed in collecting the minimum required charge of 6000 electrons after the exposure to the maximum fluence.
△ Less
Submitted 18 December, 2020; v1 submitted 20 October, 2020;
originally announced October 2020.
-
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
LHCb VELO Timepix3 Telescope
Authors:
Kazu Akiba,
Martin van Beuzekom,
Henk Boterenbrood,
Emma Buchanan,
Jan Buytaert,
Wiktor Byczynski,
Xabier Cid Vidal,
Paula Collins,
Elena Dall'Occo,
Alvaro Dosil Suarez,
Raphael Dumps,
Tim Evans,
Vinicius Franco Lima,
Abraham Gallas Torreira,
Julian Garcia Pardinas,
Bas van der Heijden,
Christoph Hombach,
Malcolm John,
Szymon Kulis,
Xavi Llopart Cudie,
Franciole Marinho,
Eugenia Price,
Sophie Richards,
Pablo Rodriguez Perez,
Daniel Saunders
, et al. (8 additional authors not shown)
Abstract:
The LHCb VELO Timepix3 telescope is a silicon pixel tracking system constructed initially to evaluate the performance of LHCb VELO Upgrade prototypes. The telesope consists of eight hybrid pixel silicon sensor planes equipped with the Timepix3 ASIC. The planes provide excellent charge measurement, timestamping and spatial resolution and the system can function at high track rates. This paper descr…
▽ More
The LHCb VELO Timepix3 telescope is a silicon pixel tracking system constructed initially to evaluate the performance of LHCb VELO Upgrade prototypes. The telesope consists of eight hybrid pixel silicon sensor planes equipped with the Timepix3 ASIC. The planes provide excellent charge measurement, timestamping and spatial resolution and the system can function at high track rates. This paper describes the construction of the telescope and its data acquisition system and offline reconstruction software. A timing resolution of 350~ps was obtained for reconstructed tracks. A pointing resolution of better than 2~\mum was determined for the 180~GeV/c %\gevc mixed hadron beam at the CERN SPS. The telescope has been shown to operate at a rate of 5 million particles~\unit{s^{-1}\cdot cm^{-2}} without a loss in efficiency.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.
-
Mapping the material in the LHCb vertex locator using secondary hadronic interactions
Authors:
M. Alexander,
W. Barter,
A. Bay,
L. J. Bel,
M. van Beuzekom,
G. Bogdanova,
S. Borghi,
T. J. V. Bowcock,
E. Buchanan,
J. Buytaert,
K. Carvalho Akiba,
S. Chen,
V. Coco,
P. Collins,
A. Crocombe,
F. Da Cunha Marinho,
E. Dall'Occo,
S. De Capua,
C. T. Dean,
F. Dettori,
D. Dossett,
K. Dreimanis,
G. Dujany,
L. Eklund,
T. Evans
, et al. (41 additional authors not shown)
Abstract:
Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties…
▽ More
Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties of a reconstructed secondary vertex and its constituent tracks, a $p$-value can be assigned to the hypothesis that the secondary vertex originates from a material interaction. A validation of this procedure is presented using photon conversions to dimuons.
△ Less
Submitted 18 June, 2018; v1 submitted 20 March, 2018;
originally announced March 2018.
-
The HPS electromagnetic calorimeter
Authors:
Ilaria Balossino,
Nathan Baltzell,
Marco Battaglieri,
Mariangela Bondi,
Emma Buchanan,
Daniela Calvo,
Andrea Celentano,
Gabriel Charles,
Luca Colaneri,
Annalisa D'Angelo,
Marzio De Napoli,
Raffaella De Vita,
Raphael Dupre,
Hovanes Egiyan,
Mathieu Ehrhart,
Alessandra Filippi,
Michel Garcon,
Nerses Gevorgyan,
Francois-Xavier Girod,
Michel Guidal,
Maurik Holtrop,
Volodymyr Iurasov,
Valery Kubarovsky,
Kenneth Livingston,
Kyle McCarty
, et al. (14 additional authors not shown)
Abstract:
The Heavy Photon Search experiment (HPS) is searching for a new gauge boson, the so-called "heavy photon." Through its kinetic mixing with the Standard Model photon, this particle could decay into an electron-positron pair. It would then be detectable as a narrow peak in the invariant mass spectrum of such pairs, or, depending on its lifetime, by a decay downstream of the production target. The HP…
▽ More
The Heavy Photon Search experiment (HPS) is searching for a new gauge boson, the so-called "heavy photon." Through its kinetic mixing with the Standard Model photon, this particle could decay into an electron-positron pair. It would then be detectable as a narrow peak in the invariant mass spectrum of such pairs, or, depending on its lifetime, by a decay downstream of the production target. The HPS experiment is installed in Hall-B of Jefferson Lab. This article presents the design and performance of one of the two detectors of the experiment, the electromagnetic calorimeter, during the runs performed in 2015-2016. The calorimeter's main purpose is to provide a fast trigger and reduce the copious background from electromagnetic processes through matching with a tracking detector. The detector is a homogeneous calorimeter, made of 442 lead-tungstate (PbWO4) scintillating crystals, each read out by an avalanche photodiode coupled to a custom trans-impedance amplifier.
△ Less
Submitted 2 February, 2017; v1 submitted 14 October, 2016;
originally announced October 2016.
-
A Helium Gas-Scintillator Active Target for Photoreaction Measurements
Authors:
R. Al Jebali,
J. R. M. Annand,
J. -O. Adler,
I. Akkurt,
E. Buchanan,
J. Brudvik,
K. Fissum,
S. Gardner,
D. J. Hamilton,
K. Hansen,
L. Isaksson,
K. Livingston,
M. Lundin,
J. C. McGeorge,
I. J. D. MacGregor,
R. MacRae,
D. G. Middleton,
A. J. H. Reiter,
G. Rosner,
B. Schröder,
J. Sjögren,
D. Sokhan,
B. Strandberg
Abstract:
A multi-cell He gas-scintillator active target, designed for the measurement of photoreaction cross sections, is described. The target has four main chambers, giving an overall thickness of 0.103 $\mathrm{g/cm^{2}}$ at an operating pressure of 2 MPa. Scintillations are read out by photomultiplier tubes and the addition of small amounts of $\mathrm{N}_{2}$ to the He, to shift the scintillation emis…
▽ More
A multi-cell He gas-scintillator active target, designed for the measurement of photoreaction cross sections, is described. The target has four main chambers, giving an overall thickness of 0.103 $\mathrm{g/cm^{2}}$ at an operating pressure of 2 MPa. Scintillations are read out by photomultiplier tubes and the addition of small amounts of $\mathrm{N}_{2}$ to the He, to shift the scintillation emission from UV to visible, is discussed. First results of measurements at the MAX IV Laboratory tagged-photon facility show that the target has good timing resolution and can cope well with a high-flux photon beam. The determination of reaction cross sections from target yields relies on a Monte Carlo simulation, which considers scintillation light transport, photodisintegration processes in $^{4}\mathrm{He}$, background photon interactions in target windows and interactions of the reaction-product particles in the gas and target container. The predictions of this simulation are compared to the measured target response.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
Characterization of photoreceivers for LISA
Authors:
Felipe Guzmán Cervantes,
Jeffrey Livas,
Robert Silverberg,
Ernest Buchanan,
Robin Stebbins
Abstract:
LISA will use quadrant photoreceivers as front-end devices for the phasemeter measuring the motion of drag-free test masses in both angular orientation and separation. We have set up a laboratory testbed for the characterization of photoreceivers. Some of the limiting noise sources have been identified and their contribution has been either measured or derived from the measured data. We have built…
▽ More
LISA will use quadrant photoreceivers as front-end devices for the phasemeter measuring the motion of drag-free test masses in both angular orientation and separation. We have set up a laboratory testbed for the characterization of photoreceivers. Some of the limiting noise sources have been identified and their contribution has been either measured or derived from the measured data. We have built a photoreceiver with a 0.5 mm diameter quadrant photodiode with an equivalent input current noise of better than 1.8 pA/sqrt[Hz] below 20 MHz and a 3dB bandwidth of 34 MHz.
△ Less
Submitted 20 March, 2012; v1 submitted 13 March, 2012;
originally announced March 2012.
