-
Characterisation of Hamamatsu R11065-20 PMTs for use in the SABRE South NaI(Tl) Crystal Detectors
Authors:
O. Stanley,
W. J. D. Melbourne,
P. Urquijo,
E. Barberio,
V. U. Bashu,
L. J. Bignell,
I. Bolognino,
G. Brooks,
S. S. Chhun,
F. Dastgiri,
M. B. Froehlich,
T. Fruth,
G. Fu,
G. C. Hill,
R. S. James,
K. Janssens,
S. Kapoor,
G. J. Lane,
K. T. Leaver,
P. McGee,
P. C. McNamara,
J. McKenzie,
L. J. McKie,
M. Mews,
L. J. Milligan
, et al. (8 additional authors not shown)
Abstract:
The SABRE Experiment is a direct detection dark matter experiment using a target composed of multiple NaI(Tl) crystals. The experiment aims to be an independent check of the DAMA/LIBRA results with a detector in the Northern (Laboratori Nazionali Del Gran Sasso, LNGS) and Southern (Stawell Underground Physics Laboratory, SUPL) hemispheres. The SABRE South photomultiplier tubes (PMTs) will be used…
▽ More
The SABRE Experiment is a direct detection dark matter experiment using a target composed of multiple NaI(Tl) crystals. The experiment aims to be an independent check of the DAMA/LIBRA results with a detector in the Northern (Laboratori Nazionali Del Gran Sasso, LNGS) and Southern (Stawell Underground Physics Laboratory, SUPL) hemispheres. The SABRE South photomultiplier tubes (PMTs) will be used near the low energy noise threshold and require a detailed calibration of their performance and contributions to the background in the NaI(Tl) dark matter search, prior to installation. We present the development of the pre-calibration procedures for the R11065-20 Hamamatsu PMTs. These PMTs are directly coupled to the NaI(Tl) crystals within the SABRE South experiment. In this paper we present methodologies to characterise the gain, dark rate, and timing properties of the PMTs. We develop a method for in-situ calibration without a light injection source. Additionally we explore the application of machine learning techniques using a Boosted Decision Tree (BDT) trained on the response of single PMTs to understand the information available for background rejection. Finally, we briefly present the simulation tool used to generate digitised PMT data from optical Monte Carlo simulations.
△ Less
Submitted 23 April, 2025;
originally announced April 2025.
-
The SABRE South Technical Design Report Executive Summary
Authors:
E. Barberio,
T. Baroncelli,
V. U. Bashu,
L. J. Bignell,
I. Bolognino,
G. Brooks,
S. S. Chhun,
F. Dastgiri,
A. Di Giacinto,
G. D'Imperio,
A. R. Duffy,
M. B. Froehlich,
T. Fruth,
G. Fu,
G. C. Hill,
R. S. James,
K. Janssens,
S. Kapoor,
G. J. Lane,
K. T. Leaver,
A. Mariani,
P. McGee,
L. J. McKie,
P. C. McNamara,
J. McKenzie
, et al. (20 additional authors not shown)
Abstract:
In this technical design report (TDR) executive summary we describe the SABRE South detector to be built at the Stawell Underground Physics Laboratory (SUPL). The SABRE South detector is designed to test the long-standing DAMA/LIBRA signal of an annually modulating rate consistent with dark matter by using the same target material. Located in the Southern Hemisphere, the detector is uniquely posit…
▽ More
In this technical design report (TDR) executive summary we describe the SABRE South detector to be built at the Stawell Underground Physics Laboratory (SUPL). The SABRE South detector is designed to test the long-standing DAMA/LIBRA signal of an annually modulating rate consistent with dark matter by using the same target material. Located in the Southern Hemisphere, the detector is uniquely positioned to disentangle modulating seasonal effects. SABRE South uses seven ultra-high purity NaI(Tl) crystals (with a total target mass of either 35 kg or 50 kg), hermetically sealed in copper enclosures that are suspended within a liquid scintillator active veto. High quantum efficiency and low background Hamamatsu R11065 photomultiplier tubes are directly coupled to both ends of the crystal, and enclosed with the crystal in an oxygen free copper enclosure. The active veto system consists of 11.6 kL of linear alkylbenzene (LAB) doped with a mixture of fluorophores and contained in a steel vessel, which is instrumented with at least 18 Hamamatsu R5912 photomultipliers. The active veto tags key radiogenic backgrounds intrinsic to the crystals, such as ${^{40}}$K, and is expected to suppress the total background by 27% in the 1-6 keV region of interest. In addition to the liquid scintillator veto, a muon veto is positioned above the detector shielding. This muon veto consists of eight EJ-200 scintillator modules, with Hamamatsu R13089 photomultipliers coupled to both ends. With an expected total background of 0.72 cpd/kg/keV, SABRE South can test the DAMA/LIBRA signal with 5$σ$ discovery or 3$σ$ exclusion after two years of data taking.
△ Less
Submitted 9 April, 2025; v1 submitted 21 November, 2024;
originally announced November 2024.
-
Simulation and background characterisation of the SABRE South experiment
Authors:
E. Barberio,
T. Baroncelli,
L. J. Bignell,
I. Bolognino,
G. Brooks,
F. Dastgiri,
G. D'Imperio,
A. Di Giacinto,
A. R. Duffy,
M. Froehlich,
G. Fu,
M. S. M. Gerathy,
G. C. Hill,
S. Krishnan,
G. J. Lane,
G. Lawrence,
K. T. Leaver,
I. Mahmood,
A. Mariani,
P. McGee,
L. J. McKie,
P. C. McNamara,
M. Mews,
W. J. D. Melbourne,
G. Milana
, et al. (16 additional authors not shown)
Abstract:
SABRE (Sodium iodide with Active Background REjection) is a direct detection dark matter experiment based on arrays of radio-pure NaI(Tl) crystals. The experiment aims at achieving an ultra-low background rate and its primary goal is to confirm or refute the results from the DAMA/LIBRA experiment. The SABRE Proof-of-Principle phase was carried out in 2020-2021 at the Gran Sasso National Laboratory…
▽ More
SABRE (Sodium iodide with Active Background REjection) is a direct detection dark matter experiment based on arrays of radio-pure NaI(Tl) crystals. The experiment aims at achieving an ultra-low background rate and its primary goal is to confirm or refute the results from the DAMA/LIBRA experiment. The SABRE Proof-of-Principle phase was carried out in 2020-2021 at the Gran Sasso National Laboratory (LNGS), in Italy. The next phase consists of two full-scale experiments: SABRE South at the Stawell Underground Physics Laboratory, in Australia, and SABRE North at LNGS. This paper focuses on SABRE South and presents a detailed simulation of the detector, which is used to characterise the background for dark matter searches including DAMA/LIBRA-like modulation. We estimate an overall background of 0.72 cpd/kg/keV$_{ee}$ in the energy range 1$-$6 keV$_{ee}$ primarily due to radioactive contamination in the crystals. Given this level of background and considering that the SABRE South has a target mass of 50 kg, we expect to exclude (confirm) DAMA/LIBRA modulation at $4~(5)σ$ within 2.5 years of data taking.
△ Less
Submitted 12 May, 2023; v1 submitted 27 May, 2022;
originally announced May 2022.
-
A scalable and reconfigurable industrial-grade Slow Control System for SABRE-South Dark matter experiment
Authors:
S. Krishnan,
S. Collins,
D. Smoors,
C. Webster,
T. Baroncelli,
G. Brooks,
J. Mould,
W. J. Dix,
P. McNamara,
F. Scutti,
G. Lane,
P. Urquijo,
A. R. Duffy
Abstract:
The Sodium iodide Active Background Rejection Experiment-South (SABRE-South) is a direct dark matter detector soon to be deployed in the Stawell gold mine, in Victoria, Australia. Monitoring of external environmental and experimental conditions, (temperature, barometric pressure, relative humidity, high voltage, and seismic vibration) is vital to ensure the data quality of the SABRE search for dar…
▽ More
The Sodium iodide Active Background Rejection Experiment-South (SABRE-South) is a direct dark matter detector soon to be deployed in the Stawell gold mine, in Victoria, Australia. Monitoring of external environmental and experimental conditions, (temperature, barometric pressure, relative humidity, high voltage, and seismic vibration) is vital to ensure the data quality of the SABRE search for dark matter via direct detection. These parameters are generally non-time-critical in the range of Hz to a few kHz and constitute a slow control system. We present the design of a novel compact, industrial-grade, and self-contained slow control system for SABRE-South. This system, featuring innovative hardware and software architecture based on National instruments compact RIO (NI-cRIO) and LabVIEW can be scaled up at low-cost and is capable of implementing the functionalities available in high-end SCADA systems while maintaining the flexibility to integrate custom software code (i.e. C++, PYTHON) for bespoke interfacing needs.
△ Less
Submitted 1 October, 2021;
originally announced October 2021.
-
Mineral Processing and Metal Extraction on the Lunar Surface -- Challenges and Opportunities
Authors:
Matthew G. Shaw,
Matthew S. Humbert,
Geoffrey A. Brooks,
Akbar Rhamdhani,
Alan R. Duffy,
Mark I. Pownceby
Abstract:
The lunar surface is extremely harsh and current mineral processing and metal extraction technologies are not adequately equipped to address this environment. In this paper we review the metals available for extraction and conditions at the lunar surface, and analyse the challenges associated with comminution, beneficiation, and metal extraction operations. The potential beneficial effects of the…
▽ More
The lunar surface is extremely harsh and current mineral processing and metal extraction technologies are not adequately equipped to address this environment. In this paper we review the metals available for extraction and conditions at the lunar surface, and analyse the challenges associated with comminution, beneficiation, and metal extraction operations. The potential beneficial effects of the natural lunar conditions are also evaluated. This investigation concludes that process plant design on the lunar surface will favour lightweight, schematically simple flow sheets that enable automation, and that utilise the local environment wherever possible. The elimination of traditional comminution and beneficiation stages and their replacement with basic classification could be economically favourable. The most promising metal reduction pathways are identified as molten regolith electrolysis, and vacuum thermal dissociation, other processes with merit are hydrogen reduction, carbothermal reduction, and solid electrolysis. Finally, it is identified that a significant research effort in all areas of astrometallurgy will be required before industrial-sized extra-terrestrial mineral processing and metal extraction operations will be viable.
△ Less
Submitted 5 September, 2021;
originally announced September 2021.
-
A Novel Electrical Method to Measure Wire Tensions for Time Projection Chambers
Authors:
D. Garcia-Gamez,
V. Basque,
T. G. Brooks,
J. J. Evans,
M. Perry,
S. Söldner-Rembold,
F. Spagliardi,
A. M. Szelc
Abstract:
We present a novel electrical technique to measure the tension of wires in multi-wire drift chambers. We create alternating electric fields by biasing adjacent wires on both sides of a test wire with a superposition of positive and negative DC voltages on an AC signal ($V_{\rm AC} \pm V_{\rm DC}$). The resulting oscillations of the wire will display a resonance at its natural frequency, and the co…
▽ More
We present a novel electrical technique to measure the tension of wires in multi-wire drift chambers. We create alternating electric fields by biasing adjacent wires on both sides of a test wire with a superposition of positive and negative DC voltages on an AC signal ($V_{\rm AC} \pm V_{\rm DC}$). The resulting oscillations of the wire will display a resonance at its natural frequency, and the corresponding change of the capacitance will lead to a measurable current. This scheme is scalable to multiple wires and therefore enables us to precisely measure the tension of a large number of wires in a short time. This technique can also be applied at cryogenic temperatures making it an attractive solution for future large time-projection chambers such as the DUNE detector. We present the concept, an example implementation and its performance in a real-world scenario and discuss the limitations of the sensitivity of the system in terms of voltage and wire length.
△ Less
Submitted 24 September, 2018; v1 submitted 16 April, 2018;
originally announced April 2018.
