Showing 1–22 of 22 results for author: Brongersma, M L

GHz-speed wavefront shaping metasurface modulators enabled by resonant electro-optic nanoantennas

Authors: Sahil Dagli, Jiyong Shim, Hamish Carr Delgado, Halleh B. Balch, Sajjad Abdollahramezani, Chih-Yi Chen, Varun Dolia, Elissa Klopfer, Jefferson Dixon, Jack Hu, Babatunde Ogunlade, Jung-Hwan Song, Mark L. Brongersma, David Barton, Jennifer A. Dionne

Abstract: Electrically tunable metasurfaces that control the amplitude and phase of light through biasing of nanoscale antennas present a route to compact, sub-micron thick modulator devices. However, most platforms face limitations in bandwidth, absolute optical efficiency, and tuning response. Here, we present electro-optically tunable metasurfaces capable of both GHz amplitude modulation and transmissive… ▽ More Electrically tunable metasurfaces that control the amplitude and phase of light through biasing of nanoscale antennas present a route to compact, sub-micron thick modulator devices. However, most platforms face limitations in bandwidth, absolute optical efficiency, and tuning response. Here, we present electro-optically tunable metasurfaces capable of both GHz amplitude modulation and transmissive wavefront shaping in the telecom range. Our resonant electro-optic nanoantenna design consists of a silicon nanobar atop thin-film lithium niobate, with gold electrodes. The silicon nanobar is a periodically perturbed optical waveguide that supports high quality factor (Q $>$ 1000) guided mode resonances excited with free space light. Applying a voltage bias to the lithium niobate tunes its refractive index, modulating the resonant behavior of the silicon nanobar through evanescent mode overlap. We demonstrate an absolute transmittance modulation of 7.1% with $\pm$5 V applied voltage, and show the dependence of this modulation behavior on the resonance quality factor. We additionally study the electrode limitations on modulation bandwidth, demonstrating bandwidths exceeding 800 MHz. Finally, we show how this resonant antenna platform can be used to design wavefront shaping metasurfaces. We demonstrate a beamsplitting metasurface device, whose diffraction efficiency can be modulated with a bandwidth of 1.03 GHz. The high-speed modulation and wavefront control capabilities of this platform provide a foundation for compact, high bandwidth free space communications and sensing devices. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Roadmap on Nonlocality in Photonic Materials and Metamaterials

Authors: Francesco Monticone, N. Asger Mortensen, Antonio I. Fernández-Domínguez, Yu Luo, Xuezhi Zheng, Christos Tserkezis, Jacob B. Khurgin, Tigran V. Shahbazyan, André J. Chaves, Nuno M. R. Peres, Gino Wegner, Kurt Busch, Huatian Hu, Fabio Della Sala, Pu Zhang, Cristian Ciracì, Javier Aizpurua, Antton Babaze, Andrei G. Borisov, Xue-Wen Chen, Thomas Christensen, Wei Yan, Yi Yang, Ulrich Hohenester, Lorenz Huber , et al. (41 additional authors not shown)

Abstract: Photonic technologies continue to drive the quest for new optical materials with unprecedented responses. A major frontier in this field is the exploration of nonlocal (spatially dispersive) materials, going beyond the local, wavevector-independent assumption traditionally made in optical material modeling. On one end, the growing interest in plasmonic, polaritonic and quantum materials has reveal… ▽ More Photonic technologies continue to drive the quest for new optical materials with unprecedented responses. A major frontier in this field is the exploration of nonlocal (spatially dispersive) materials, going beyond the local, wavevector-independent assumption traditionally made in optical material modeling. On one end, the growing interest in plasmonic, polaritonic and quantum materials has revealed naturally occurring nonlocalities, emphasizing the need for more accurate models to predict and design their optical responses. This has major implications also for topological, nonreciprocal, and time-varying systems based on these material platforms. Beyond natural materials, artificially structured materials--metamaterials and metasurfaces--can provide even stronger and engineered nonlocal effects, emerging from long-range interactions or multipolar effects. This is a rapidly expanding area in the field of photonic metamaterials, with open frontiers yet to be explored. In the case of metasurfaces, in particular, nonlocality engineering has become a powerful tool for designing strongly wavevector-dependent responses, enabling enhanced wavefront control, spatial compression, multifunctional devices, and wave-based computing. Furthermore, nonlocality and related concepts play a critical role in defining the ultimate limits of what is possible in optics, photonics, and wave physics. This Roadmap aims to survey the most exciting developments in nonlocal photonic materials, highlight new opportunities and open challenges, and chart new pathways that will drive this emerging field forward--toward new scientific discoveries and technological advancements. △ Less

Submitted 28 March, 2025; v1 submitted 1 March, 2025; originally announced March 2025.

Journal ref: Optical Materials Express 15, 1544 (2025)

Highly efficient, tunable, electro-optic metasurfaces based on quasi-bound states in the continuum

Authors: Christopher Damgaard-Carstensen, Torgom Yezekyan, Mark L. Brongersma, Sergey I. Bozhevolnyi

Abstract: Ultrafast and highly efficient dynamic optical metasurfaces enabling truly spatiotemporal control over optical radiation are poised to revolutionize modern optics and photonics, but their practical realization remains elusive. In this work, we demonstrate highly efficient electro-optic metasurfaces based on quasi-bound states in the continuum (qBIC) operating in reflection that are amenable for ul… ▽ More Ultrafast and highly efficient dynamic optical metasurfaces enabling truly spatiotemporal control over optical radiation are poised to revolutionize modern optics and photonics, but their practical realization remains elusive. In this work, we demonstrate highly efficient electro-optic metasurfaces based on quasi-bound states in the continuum (qBIC) operating in reflection that are amenable for ultrafast operation and thereby spatiotemporal control over reflected optical fields. The material configuration consists of a lithium niobate thin film sandwiched between an optically thick gold back-reflector and a grating of gold nanoridges also functioning as control electrodes. Metasurfaces for optical free-space intensity modulation are designed by utilizing the electro-optic Pockels effect in combination with an ultra-narrow qBIC resonance, whose wavelength can be finely tuned by varying the angle of light incidence. The fabricated electro-optic metasurfaces operate at telecom wavelengths with the modulation depth reaching 95 % (modulating thereby 35 % of the total incident power) for a bias voltage of +/-30 V within the electrical bandwidth of 125 MHz. Leveraging the highly angle-dependent qBIC resonance realized, we demonstrate electrically tunable phase contrast imaging using the fabricated metasurface. Moreover, given the potential bandwidth of 39 GHz estimated for the metasurface pixel size of 22 $μ$m, the demonstrated electro-optic metasurfaces promise successful realization of unique optical functions, such as harmonic beam steering and spatiotemporal shaping as well as nonreciprocal operation. △ Less

Submitted 13 December, 2024; v1 submitted 2 December, 2024; originally announced December 2024.

High-throughput antibody screening with high-quality factor nanophotonics and bioprinting

Authors: Sajjad Abdollahramezani, Darrell Omo-Lamai, Gerlof Bosman, Omid Hemmatyar, Sahil Dagli, Varun Dolia, Kai Chang, Nicholas A. Gusken, Hamish C. Delgado, Geert-Jan Boons, Mark L. Brongersma, Fareeha Safir, Butrus T. Khuri-Yakub, Parivash Moradifar, Jennifer A. Dionne

Abstract: Empirical investigation of the quintillion-scale, functionally diverse antibody repertoires that can be generated synthetically or naturally is critical for identifying potential biotherapeutic leads, yet remains burdensome. We present high-throughput nanophotonics- and bioprinter-enabled screening (HT-NaBS), a multiplexed assay for large-scale, sample-efficient, and rapid characterization of anti… ▽ More Empirical investigation of the quintillion-scale, functionally diverse antibody repertoires that can be generated synthetically or naturally is critical for identifying potential biotherapeutic leads, yet remains burdensome. We present high-throughput nanophotonics- and bioprinter-enabled screening (HT-NaBS), a multiplexed assay for large-scale, sample-efficient, and rapid characterization of antibody libraries. Our platform is built upon independently addressable pixelated nanoantennas exhibiting wavelength-scale mode volumes, high-quality factors (high-Q) exceeding 5000, and pattern densities exceeding one million sensors per square centimeter. Our custom-built acoustic bioprinter enables individual sensor functionalization via the deposition of picoliter droplets from a library of capture antigens at rates up to 25,000 droplets per second. We detect subtle differentiation in the target binding signature through spatially-resolved spectral imaging of hundreds of resonators simultaneously, elucidating antigen-antibody binding kinetic rates, affinity constant, and specificity. We demonstrate HT-NaBS on a panel of antibodies targeting SARS-CoV-2, Influenza A, and Influenza B antigens, with a sub-picomolar limit of detection within 30 minutes. Furthermore, through epitope binning analysis, we demonstrate the competence and diversity of a library of native antibodies targeting functional epitopes on a priority pathogen (H5N1 bird flu) and on glycosylated therapeutic Cetuximab antibodies against epidermal growth factor receptor. With a roadmap to image tens of thousands of sensors simultaneously, this high-throughput, resource-efficient, and label-free platform can rapidly screen for high-affinity and broad epitope coverage, accelerating biotherapeutic discovery and de novo protein design. △ Less

Submitted 27 November, 2024; originally announced November 2024.

Nonresonant Raman control of material phases

Authors: Jiaojian Shi, Christian Heide, Haowei Xu, Yijing Huang, Yuejun Shen, Burak Guzelturk, Meredith Henstridge, Carl Friedrich Schön, Anudeep Mangu, Yuki Kobayashi, Xinyue Peng, Shangjie Zhang, Andrew F. May, Pooja Donthi Reddy, Viktoryia Shautsova, Mohammad Taghinejad, Duan Luo, Eamonn Hughes, Mark L. Brongersma, Kunal Mukherjee, Mariano Trigo, Tony F. Heinz, Ju Li, Keith A. Nelson, Edoardo Baldini , et al. (5 additional authors not shown)

Abstract: Important advances have recently been made in the search for materials with complex multi-phase landscapes that host photoinduced metastable collective states with exotic functionalities. In almost all cases so far, the desired phases are accessed by exploiting light-matter interactions via the imaginary part of the dielectric function through above-bandgap or resonant mode excitation. Nonresonant… ▽ More Important advances have recently been made in the search for materials with complex multi-phase landscapes that host photoinduced metastable collective states with exotic functionalities. In almost all cases so far, the desired phases are accessed by exploiting light-matter interactions via the imaginary part of the dielectric function through above-bandgap or resonant mode excitation. Nonresonant Raman excitation of coherent modes has been experimentally observed and proposed for dynamic material control, but the resulting atomic excursion has been limited to perturbative levels. Here, we demonstrate that it is possible to overcome this challenge by employing nonresonant ultrashort pulses with low photon energies well below the bandgap. Using mid-infrared pulses, we induce ferroelectric reversal in lithium niobate and phase switching in tin selenide and characterize the large-amplitude mode displacements through femtosecond Raman scattering, second harmonic generation, and x-ray diffraction. This approach, validated by first-principle calculations, defines a novel method for synthesizing hidden phases with unique functional properties and manipulating complex energy landscapes at reduced energy consumption and ultrafast speeds. △ Less

Submitted 15 November, 2024; originally announced November 2024.

Comments: 5 figures

Routing Light Emission from Monolayer MoS$_2$ by Mie Resonances of Crystalline Silicon Nanospheres

Authors: Keisuke Ozawa, Hiroshi Sugimoto, Daisuke Shima, Tatsuki Hinamoto, Mojtaba Karimi Habil, Yan Joe Lee, Søren Raza, Keisuke Imaeda, Kosei Ueno, Mark L. Brongersma, Minoru Fujii

Abstract: A dielectric Mie-resonant nanoantenna is capable of controlling the directionality of the emission from nearby quantum emitters through the excitation of multiple degenerate Mie resonances. A crystalline silicon nanosphere (Si NS) is a promising candidate for a dielectric nanoantenna because crystalline Si has a large refractive index (3.8 at 650 nm) and the small imaginary part of a complex refra… ▽ More A dielectric Mie-resonant nanoantenna is capable of controlling the directionality of the emission from nearby quantum emitters through the excitation of multiple degenerate Mie resonances. A crystalline silicon nanosphere (Si NS) is a promising candidate for a dielectric nanoantenna because crystalline Si has a large refractive index (3.8 at 650 nm) and the small imaginary part of a complex refractive index (0.015 at 650 nm) as an optical material. In this work, we control the emission directionality of excitons supported by monolayer transition metal dichalcogenides (1L-TMDCs) using a Si NS. We first discuss the condition to extract the emission preferentially towards the Si NS side from the analytical calculations. We then study the photoluminescence (PL) of 1L-TMDCs on which differently sized single Si NSs are placed. We show that the PL spectral shape strongly depends on the emission direction, and that the emission toward the Si NS side (top) with respect to the opposite side (bottom) is the largest at wavelengths between the magnetic dipole and electric dipole Mie resonances of a Si NS. Finally, we quantitatively discuss the spectral shape of the top-to-bottom ratio from numerical simulations. △ Less

Submitted 28 October, 2024; originally announced October 2024.

Comments: 8 pages, 5 figures

Ion-Assisted Nanoscale Material Engineering in Atomic Layers

Authors: Hossein Taghinejad, Mohammad Taghinejad, Sajjad Abdollahramezani, Qitong Li, Eric V. Woods, Mengkun Tian, Ali A. Eftekhar, Yuanqi Lyu, Xiang Zhang, Pulickel M. Ajayan, Wenshan Cai, Mark L. Brongersma, James G. Analytis, Ali Adibi

Abstract: Achieving deterministic control over the properties of low-dimensional materials with nanoscale precision is a long-sought goal. Mastering this capability has a transformative impact on the design of multifunctional electrical and optical devices. Here, we present an ion-assisted synthetic technique that enables precise control over the material composition and energy landscape of two-dimensional… ▽ More Achieving deterministic control over the properties of low-dimensional materials with nanoscale precision is a long-sought goal. Mastering this capability has a transformative impact on the design of multifunctional electrical and optical devices. Here, we present an ion-assisted synthetic technique that enables precise control over the material composition and energy landscape of two-dimensional (2D) atomic crystals. Our method transforms binary transition metal dichalcogenides (TMDs), like MoSe$_2$, into ternary MoS$_{2α}$Se$_{2(1-α})$ alloys with systematically adjustable compositions, $α$. By piecewise assembly of the lateral, compositionally modulated MoS$_{2α}$Se$_{2(1-α)}$ segments within 2D atomic layers, we present a synthetic pathway towards the realization of multi-compositional designer materials. Our technique enables the fabrication of complex structures with arbitrary boundaries, dimensions as small as 30 nm, and fully customizable energy landscapes. Our optical characterizations further showcase the potential for implementing tailored optoelectronics in these engineered 2D crystals. △ Less

Submitted 8 October, 2024; originally announced October 2024.

Comments: 22 pages, 5 Figures

Tunable vector beam decoder by inverse design for high-dimensional quantum key distribution with 3D polarized spatial modes

Authors: Eileen Otte, Alexander D. White, Nicholas A. Güsken, Jelena Vučković, Mark L. Brongersma

Abstract: Spatial modes of light have become highly attractive to increase the dimension and, thereby, security and information capacity in quantum key distribution (QKD). So far, only transverse electric field components have been considered, while longitudinal polarization components have remained neglected. Here, we present an approach to include all three spatial dimensions of electric field oscillation… ▽ More Spatial modes of light have become highly attractive to increase the dimension and, thereby, security and information capacity in quantum key distribution (QKD). So far, only transverse electric field components have been considered, while longitudinal polarization components have remained neglected. Here, we present an approach to include all three spatial dimensions of electric field oscillation in QKD by implementing our tunable, on-a-chip vector beam decoder (VBD). This inversely designed device pioneers the "preparation" and "measurement" of three-dimensionally polarized mutually unbiased basis states for high-dimensional (HD) QKD and paves the way for the integration of HD QKD with spatial modes in multifunctional on-a-chip photonics platforms. △ Less

Submitted 25 April, 2023; v1 submitted 24 April, 2023; originally announced April 2023.

Comments: 10 pages, 3 figures. Corrected typos & added reference

Achiral dielectric metasurfaces for spectral and polarization control of valley specific light emission from monolayer MoS2

Authors: Yin Liu, Sze Cheung Lau, Wen-Hui Sophia Cheng, Amalya Johnson, Qitong Li, Emma Simmerman, Ouri Karni, Jack Hu, Fang Liu, Mark L. Brongersma, Tony F. Heinz, Jennifer A. Dionne

Abstract: Excitons in two-dimensional transition metal dichalcogenides have a valley degree of freedom that can be optically accessed and manipulated for quantum information processing. Here, we integrate MoS2 with achiral silicon disk array metasurfaces to enhance and control valley-specific absorption and emission. Through the coupling to the metasurface Mie modes, the intensity and lifetime of the emissi… ▽ More Excitons in two-dimensional transition metal dichalcogenides have a valley degree of freedom that can be optically accessed and manipulated for quantum information processing. Here, we integrate MoS2 with achiral silicon disk array metasurfaces to enhance and control valley-specific absorption and emission. Through the coupling to the metasurface Mie modes, the intensity and lifetime of the emission of neutral excitons, trions and defect bound excitons can be enhanced, while the spectral shape can be modified. Additionally, we demonstrate the symmetric enhancement of the degree-of-polarization (DOP) of neutral exciton and trions via valley-resolved PL measurements, and find that the DOP can be as high as 24% for exciton emission and 34% for trion emission at 100K. These results can be understood by analyzing the near-field impact of metasurface resonators on both the chiral absorption of MoS2 emitters as well as the enhanced emission from the Purcell effect. Combining Si-compatible photonic design with large-scale (mm-scale) 2D materials integration, our work makes an important step towards on-chip valleytronic applications approaching room-temperature operation. △ Less

Submitted 5 June, 2023; v1 submitted 18 December, 2022; originally announced December 2022.

High-Specific-Power Flexible Transition Metal Dichalcogenide Solar Cells

Authors: Koosha Nassiri Nazif, Alwin Daus, Jiho Hong, Nayeun Lee, Sam Vaziri, Aravindh Kumar, Frederick Nitta, Michelle Chen, Siavash Kananian, Raisul Islam, Kwan-Ho Kim, Jin-Hong Park, Ada Poon, Mark L. Brongersma, Eric Pop, Krishna C. Saraswat

Abstract: Semiconducting transition metal dichalcogenides (TMDs) are promising for flexible high-specific-power photovoltaics due to their ultrahigh optical absorption coefficients, desirable band gaps and self-passivated surfaces. However, challenges such as Fermi-level pinning at the metal contact-TMD interface and the inapplicability of traditional doping schemes have prevented most TMD solar cells from… ▽ More Semiconducting transition metal dichalcogenides (TMDs) are promising for flexible high-specific-power photovoltaics due to their ultrahigh optical absorption coefficients, desirable band gaps and self-passivated surfaces. However, challenges such as Fermi-level pinning at the metal contact-TMD interface and the inapplicability of traditional doping schemes have prevented most TMD solar cells from exceeding 2% power conversion efficiency (PCE). In addition, fabrication on flexible substrates tends to contaminate or damage TMD interfaces, further reducing performance. Here, we address these fundamental issues by employing: 1) transparent graphene contacts to mitigate Fermi-level pinning, 2) $\rm{MoO}_\it{x}$ capping for doping, passivation and anti-reflection, and 3) a clean, non-damaging direct transfer method to realize devices on lightweight flexible polyimide substrates. These lead to record PCE of 5.1% and record specific power of $\rm{4.4\ W\,g^{-1}}$ for flexible TMD ($\rm{WSe_2}$) solar cells, the latter on par with prevailing thin-film solar technologies cadmium telluride, copper indium gallium selenide, amorphous silicon and III-Vs. We further project that TMD solar cells could achieve specific power up to $\rm{46\ W\,g^{-1}}$, creating unprecedented opportunities in a broad range of industries from aerospace to wearable and implantable electronics. △ Less

Submitted 24 June, 2021; v1 submitted 19 June, 2021; originally announced June 2021.

Comments: 39 pages; v2: some references reformatted

Journal ref: Nature Communications 12, 7034 (2021)

Nonlocal metasurfaces for spectrally decoupled wavefront manipulation and eye tracking

Authors: Jung-Hwan Song, Jorik van de Groep, Soo Jin Kim, Mark L. Brongersma

Abstract: Metasurface-based optical elements typically manipulate light waves by imparting space-variant changes in the amplitude and phase with a dense array of scattering nanostructures. The highly-localized and low optical-quality-factor (Q) modes of nanostructures are beneficial for wavefront-shaping as they afford quasi-local control over the electromagnetic fields. However, many emerging imaging, sens… ▽ More Metasurface-based optical elements typically manipulate light waves by imparting space-variant changes in the amplitude and phase with a dense array of scattering nanostructures. The highly-localized and low optical-quality-factor (Q) modes of nanostructures are beneficial for wavefront-shaping as they afford quasi-local control over the electromagnetic fields. However, many emerging imaging, sensing, communication, display, and non-linear optics applications instead require flat, high-Q optical elements that provide notable energy storage and a much higher degree of spectral control over the wavefront. Here, we demonstrate high-Q, nonlocal metasurfaces with atomically-thin metasurface elements that offer notably enhanced light-matter interaction and fully-decoupled optical functions at different wavelengths. We illustrate a possible use of such a flat optic in eye tracking for eye-wear. Here, a metasurface patterned on a regular pair of eye-glasses provides an unperturbed view of the world across the visible spectrum and redirects near-infrared light to a camera to allow imaging of the eye. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Electrical Tuning of Phase Change Antennas and Metasurfaces

Authors: Yifei Wang, Patrick Landreman, David Schoen, Kye Okabe, Ann Marshall, Umberto Celano, H. -S. Philip Wong, Junghyun Park, Mark L. Brongersma

Abstract: The success of semiconductor electronics is built on the creation of compact, low-power switching elements that offer routing, logic, and memory functions. The availability of nanoscale optical switches could have a similarly transformative impact on the development of dynamic and programmable metasurfaces, optical neural networks, and quantum information processing. Phase change materials are uni… ▽ More The success of semiconductor electronics is built on the creation of compact, low-power switching elements that offer routing, logic, and memory functions. The availability of nanoscale optical switches could have a similarly transformative impact on the development of dynamic and programmable metasurfaces, optical neural networks, and quantum information processing. Phase change materials are uniquely suited to enable their creation as they offer high-speed electrical switching between amorphous and crystalline states with notably different optical properties. Their high refractive index has also been harnessed to fashion them into compact optical antennas. Here, we take the next important step by realizing electrically-switchable phase change antennas and metasurfaces that offer strong, reversible, non-volatile, multi-phase switching and spectral tuning of light scattering in the visible and near-infrared spectral ranges. Their successful implementation relies on a careful joint thermal and optical optimization of the antenna elements that comprise an Ag strip that simultaneously serves as a plasmonic resonator and a miniature heating stage. △ Less

Submitted 28 August, 2020; originally announced August 2020.

Comments: 14 pages, 4 figures

Report number: Nature Nanotechnology 16.6 (2021): 667-672

Efficient energy propagation through self-assembled gold nanoparticle chain waveguides

Authors: Fatih N. Gür, Cillian P. T. McPolin, Søren Raza, Martin Mayer, Diane J. Roth, Anja Maria Steiner, Markus Löffler, Andreas Fery, Mark L. Brongersma, Anatoly V. Zayats, Tobias A. F. König, Thorsten L. Schmidt

Abstract: The strong interaction of light with metallic nanoparticles enables field confinement well below the diffraction limit. Plasmonic waveguides consisting of metal nanoparticle chains could be used for the propagation of energy or information on the nanoscale, but high losses have thus far impeded practical applications. Here we demonstrate that efficient waveguiding is possible through gold nanopart… ▽ More The strong interaction of light with metallic nanoparticles enables field confinement well below the diffraction limit. Plasmonic waveguides consisting of metal nanoparticle chains could be used for the propagation of energy or information on the nanoscale, but high losses have thus far impeded practical applications. Here we demonstrate that efficient waveguiding is possible through gold nanoparticle chains despite the high dissipative losses of gold. A DNA origami directed self-assembly of monocrystalline, spherical nanoparticles allows the interparticle spacing to be decreased to 2 nm or below, which gives rise to lower-energy plasmon resonance modes. Our simulations imply that these lower energy modes allow efficient waveguiding but collapse if interparticle gap sizes are increased. Individual waveguides are characterized with nanometer-resolution by electron energy loss spectroscopy, and directed propagation of energy towards a fluorescent nanodiamond and nanoscale energy conversion is shown by cathodoluminescence imaging spectroscopy on a single-device level. With this approach, micrometer-long propagation lengths might be achieved, enabling applications in information technology, sensing and quantum optics. △ Less

Submitted 10 July, 2018; v1 submitted 25 December, 2017; originally announced December 2017.

Silicon Mie Resonators for Highly Directional Light Emission from monolayer MoS2

Authors: Ahmet Fatih Cihan, Alberto G. Curto, Søren Raza, Pieter G. Kik, Mark L. Brongersma

Abstract: Controlling light emission from quantum emitters has important applications ranging from solid-state lighting and displays to nanoscale single-photon sources. Optical antennas have emerged as promising tools to achieve such control right at the location of the emitter, without the need for bulky, external optics. Semiconductor nanoantennas are particularly practical for this purpose because simple… ▽ More Controlling light emission from quantum emitters has important applications ranging from solid-state lighting and displays to nanoscale single-photon sources. Optical antennas have emerged as promising tools to achieve such control right at the location of the emitter, without the need for bulky, external optics. Semiconductor nanoantennas are particularly practical for this purpose because simple geometries, such as wires and spheres, support multiple, degenerate optical resonances. Here, we start by modifying Mie scattering theory developed for plane wave illumination to describe scattering of dipole emission. We then use this theory and experiments to demonstrate several pathways to achieve control over the directionality, polarization state, and spectral emission that rely on a coherent coupling of an emitting dipole to optical resonances of a Si nanowire. A forward-to-backward ratio of 20 was demonstrated for the electric dipole emission at 680 nm from a monolayer MoS2 by optically coupling it to a Si nanowire. △ Less

Submitted 14 September, 2017; originally announced September 2017.

Journal ref: Nature Photonics 12, 284-290 (2018)

Optical emission near a high-impedance mirror

Authors: Majid Esfandyarpour, Alberto G. Curto, Pieter G. Kik, Nader Engheta, Mark L. Brongersma

Abstract: Solid state light emitters rely on metallic contacts with high sheet-conductivity for effective charge injection. Unfortunately, such contacts also support surface plasmon polariton (SPP) excitations that dissipate optical energy into the metal and limit the external quantum efficiency. Here, inspired by the concept of radio-frequency (RF) high-impedance surfaces and their use in conformal antenna… ▽ More Solid state light emitters rely on metallic contacts with high sheet-conductivity for effective charge injection. Unfortunately, such contacts also support surface plasmon polariton (SPP) excitations that dissipate optical energy into the metal and limit the external quantum efficiency. Here, inspired by the concept of radio-frequency (RF) high-impedance surfaces and their use in conformal antennas we illustrate how electrodes can be nanopatterned to simultaneously provide a high DC electrical conductivity and high-impedance at optical frequencies. Such electrodes do not support SPPs across the visible spectrum and greatly suppress dissipative losses while facilitating a desirable Lambertian emission profile. We verify this concept by studying the emission enhancement and photoluminescence lifetime for a dye emitter layer deposited on the electrodes. △ Less

Submitted 3 August, 2017; originally announced August 2017.

Probing the Electrical Switching of a Memristive Optical Antenna by STEM EELS

Authors: David T. Schoen, Aaron Holsteen, Mark L. Brongersma

Abstract: The scaling of active photonic devices to deep-submicron length-scales has been hampered by the fundamental diffraction limit and the absence of materials with sufficiently strong electro-optic effects. Here, we demonstrate a solid state electro-optical switching mechanism that can operate in the visible spectral range with an unparalleled active volume of less than 5 nm cube, comparable to the si… ▽ More The scaling of active photonic devices to deep-submicron length-scales has been hampered by the fundamental diffraction limit and the absence of materials with sufficiently strong electro-optic effects. Here, we demonstrate a solid state electro-optical switching mechanism that can operate in the visible spectral range with an unparalleled active volume of less than 5 nm cube, comparable to the size of the smallest electronic components. The switching mechanism relies on electrochemically displacing metal atoms inside the nanometer-scale gap to electrically connect two crossed metallic wires forming a crosspoint junction. Such junctions afford extreme light concentration and display singular optical behavior upon formation of a conductive channel. We illustrate how this effect can be used to actively tune the resonances of plasmonic antennas. The tuning mechanism is analyzed using a combination of electrical and optical measurements as well as electron energy loss (EELS) in a scanning transmission electron microscope (STEM). △ Less

Submitted 4 November, 2015; originally announced November 2015.

Comments: 17 pages, 3 figures

A Nanomembrane-Based Bandgap-Tunable Germanium Microdisk Using Lithographically-Customizable Biaxial Strain for Silicon-Compatible Optoelectronics

Authors: David S. Sukhdeo, Donguk Nam, Ju-Hyung Kang, Mark L. Brongersma, Krishna C. Saraswat

Abstract: Strain engineering has proven to be vital for germanium-based photonics, in particular light emission. However, applying a large permanent biaxial strain to germanium has been a challenge. We present a simple, CMOS-compatible technique to conveniently induce a large, spatially homogenous strain in microdisks patterned within ultrathin germanium nanomembranes. Our technique works by concentrating a… ▽ More Strain engineering has proven to be vital for germanium-based photonics, in particular light emission. However, applying a large permanent biaxial strain to germanium has been a challenge. We present a simple, CMOS-compatible technique to conveniently induce a large, spatially homogenous strain in microdisks patterned within ultrathin germanium nanomembranes. Our technique works by concentrating and amplifying a pre-existing small strain into the microdisk region. Biaxial strains as large as 1.11% are observed by Raman spectroscopy and are further confirmed by photoluminescence measurements, which show enhanced and redshifted light emission from the strained microdisks. Our technique allows the amount of biaxial strain to be customized lithographically, allowing the bandgaps of different microdisks to be independently tuned in a single mask process. Our theoretical calculations show that this platform can deliver substantial performance improvements, including a >200x reduction in the lasing threshold, to biaxially strained germanium lasers for silicon-compatible optical interconnects. △ Less

Submitted 3 November, 2014; originally announced November 2014.

Comments: 28 pages (19 pages main text + 9 pages supporting information), 10 figures (6 figures main text + 4 figures supporting information)

Near field radiative thermal transfer between nano-structured periodic materials

Authors: Hamidreza Chalabi, Erez Hasman, Mark L. Brongersma

Abstract: This paper provides a method based on rigorous coupled wave analysis for the calculation of the radiative thermal capacitance between a layer that is patterned with arbitrary, periodically repeating features and a planar one. This method is applied to study binary gratings and arrays of beams with a rectangular cross section. The effects of the structure size and spacing on the thermal capacitance… ▽ More This paper provides a method based on rigorous coupled wave analysis for the calculation of the radiative thermal capacitance between a layer that is patterned with arbitrary, periodically repeating features and a planar one. This method is applied to study binary gratings and arrays of beams with a rectangular cross section. The effects of the structure size and spacing on the thermal capacitance are investigated. In all of these calculations, a comparison is made with an effective medium theory which becomes increasingly accurate as the structure sizes fall well below the relevant resonance wavelength. Results show that new levels of control over the magnitude and spectral contributions to thermal capacitance can be achieved with corrugated structures relative to planar ones. △ Less

Submitted 28 December, 2013; originally announced December 2013.

Comments: 15 pages

Journal ref: Phys. Rev. B 91, 014302 (2015)

Tensile-Strained Germanium-on-Insulator Substrate Fabrication for Silicon-Compatible Optoelectronics

Authors: J. Raja Jain, Dany-Sebastien Ly-Gagnon, Krishna C. Balram, Justin S. White, Mark L. Brongersma, David A. B. Miller, Roger T. Howe

Abstract: We present a method to fabricate tensile-strained germanium-on-insulator (GOI) substrates using heteroepitaxy and layer transfer techniques. The motivation is to obtain a high-quality wafer-scale GOI platform suitable for silicon-compatible optoelectronic device fabrication. Crystal quality is assessed using X-Ray Diffraction (XRD) and Transmission Electron Microscopy. A biaxial tensile film strai… ▽ More We present a method to fabricate tensile-strained germanium-on-insulator (GOI) substrates using heteroepitaxy and layer transfer techniques. The motivation is to obtain a high-quality wafer-scale GOI platform suitable for silicon-compatible optoelectronic device fabrication. Crystal quality is assessed using X-Ray Diffraction (XRD) and Transmission Electron Microscopy. A biaxial tensile film strain of 0.16% is verified by XRD. Suitability for device manufacturing is demonstrated through fabrication and characterization of metal-semiconductor-metal photodetectors that exhibit photoresponse beyond 1.55 μm. The substrate fabrication process is compatible with complementary metal-oxide-semiconductor manufacturing and represents a potential route to wafer-scale integration of silicon-compatible optoelectronics. △ Less

Submitted 17 September, 2011; v1 submitted 30 April, 2011; originally announced May 2011.

Journal ref: Optical Materials Express 1(6), 1121--1126 (2011)

Plasmon Enhanced Solar-to-Fuel Energy Conversion

Authors: I. Thomann, B. A. Pinaud, Z. Chen, B. M. Clemens, T. F. Jaramillo, Mark. L. Brongersma

Abstract: Future generations of photoelectrodes for solar fuel generation must employ inexpensive, earth-abundant absorber materials in order to provide a large-scale source of clean energy. These materials tend to have poor electrical transport properties and exhibit carrier diffusion lengths which are significantly shorter than the absorption depth of light. As a result, many photo-excited carriers are ge… ▽ More Future generations of photoelectrodes for solar fuel generation must employ inexpensive, earth-abundant absorber materials in order to provide a large-scale source of clean energy. These materials tend to have poor electrical transport properties and exhibit carrier diffusion lengths which are significantly shorter than the absorption depth of light. As a result, many photo-excited carriers are generated too far from a reactive surface, and recombine instead of participating in solar-to-fuel-conversion. We demonstrate that plasmonic resonances in metallic nanostructures and multi-layer interference effects can be engineered to strongly concentrate sunlight close to the electrode/liquid interface, precisely where the relevant reactions take place. By comparing spectral features in the enhanced photocurrent spectra to full-field electromagnetic simulations, the contribution of surface plasmon excitations is verified. These results open the door to the optimization of a wide variety of photochemical processes by leveraging the rapid advances in the field of plasmonics. △ Less

Submitted 2 March, 2011; originally announced March 2011.

Journal ref: Nano Lett. 2011, 11, 3440-3446

Solving dielectric and plasmonic waveguide dispersion relations with a pocket calculator

Authors: Rohan D. Kekatpure, Aaron C. Hryciw, Edward S. Barnard, Mark L. Brongersma

Abstract: We present a robust iterative technique for solving complex transcendental dispersion equations routinely encountered in integrated optics. Our method especially befits the multilayer dielectric and plasmonic waveguides forming the basis structures for a host of contemporary nanophotonic devices. The solution algorithm ports seamlessly from the real to the complex domain--i.e., no extra complexi… ▽ More We present a robust iterative technique for solving complex transcendental dispersion equations routinely encountered in integrated optics. Our method especially befits the multilayer dielectric and plasmonic waveguides forming the basis structures for a host of contemporary nanophotonic devices. The solution algorithm ports seamlessly from the real to the complex domain--i.e., no extra complexity results when dealing with leaky structures or those with material/metal loss. Unlike several existing numerical approaches, our algorithm exhibits markedly-reduced sensitivity to the initial guess and allows for straightforward implementation on a pocket calculator. △ Less

Submitted 14 October, 2009; v1 submitted 27 September, 2009; originally announced September 2009.

Comments: 18 pages, 11 Figures, 5 Tables, added references, Submitted to Optics Express

Journal ref: Optics Express Vol 17 (No. 26) pp. 24112 (2009)

Strong Off-Resonant Enhancement of Spontaneous Emission in Metal-Dielectric-Metal Plasmon Waveguide Structures

Authors: Y. C. Jun, R. D. Kekapture, J. S. White, M. L. Brongersma

Abstract: We theoretically investigate the spontaneous emission process of an optical, dipolar emitter in metal-dielectric-metal slab and slot waveguide structures. We find that both structures exhibit strong off-resonant emission enhancements due to the tight confinement of modes between two metallic plates. The large enhancement of surface plasmon-polariton excitation enables dipole emission to be prefe… ▽ More We theoretically investigate the spontaneous emission process of an optical, dipolar emitter in metal-dielectric-metal slab and slot waveguide structures. We find that both structures exhibit strong off-resonant emission enhancements due to the tight confinement of modes between two metallic plates. The large enhancement of surface plasmon-polariton excitation enables dipole emission to be preferentially coupled into plasmon waveguide modes. These structures find applications in creating nanoscale local light sources or in generating guided single plasmons in integrated optical circuits. △ Less

Submitted 11 August, 2008; originally announced August 2008.

Comments: 13 pages, 5 figures