Showing 1–8 of 8 results for author: Bringedal, C

Local Thermal Non-Equilibrium Models in Porous Media: A Comparative Study of Conduction Effects

Authors: Anna Mareike Kostelecky, Ivar Stefansson, Carina Bringedal, Tufan Ghosh, Helge K. Dahle, Rainer Helmig

Abstract: Instantaneous heat transfer between different phases is a common assumption for modeling heat transfer in porous media, known as Local Thermal Equilibrium (LTE). This assumption may not hold in certain technical and environmental applications, especially in systems with large temperature gradients, large differences in thermal properties, or high velocities. Local Thermal Non-Equilibrium (LTNE) mo… ▽ More Instantaneous heat transfer between different phases is a common assumption for modeling heat transfer in porous media, known as Local Thermal Equilibrium (LTE). This assumption may not hold in certain technical and environmental applications, especially in systems with large temperature gradients, large differences in thermal properties, or high velocities. Local Thermal Non-Equilibrium (LTNE) models aim to describe heat transfer processes when the LTE assumption may fail. In this work, we compare three continuum-scale models from the pore to the representative elementary volume (REV) scale. Specifically, dual-network and REV-scale models are evaluated against a pore-resolved model, which we perceive as a reference in the absence of experimental results. Different effective models are used to obtain upscaled properties on the REV scale and to compare resulting temperature profiles. The systems investigated are fully saturated, consisting of one fluid and one solid phase. This study focuses on purely conductive systems without significant differences in thermal properties. Results show that LTE holds then for low interfacial resistances. However, for large interfacial resistances, solid and fluid temperatures differ. The REV-scale model with effective parameters obtained by homogenization leads to similar results as the pore-resolved model, whereas the dual-network model shows greater deviation due to its fixed spatial resolution. Among the evaluated effective parameter formulations for the REV-scale model, only the homogenization-based approach captures the LTNE behavior, as it incorporates the interfacial heat transfer coefficient. Convection is relevant for most practical applications, and its impact will be addressed in a follow-up article. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Impact of saturation on evaporation-driven density instabilities in porous media: mathematical and numerical analysis

Authors: C. Bringedal, S. Kiemle, C. J. van Duijn, R. Helmig

Abstract: Evaporation from a porous medium partially saturated with saline water, causes the salinity (salt concentration) to increase near the top of the porous medium as water leaves while salt stays behind. As the density of the water increases with increased salt concentration, the evaporation leads to a gravitational unstable setting, where density instabilities can form. Whether density instabilities… ▽ More Evaporation from a porous medium partially saturated with saline water, causes the salinity (salt concentration) to increase near the top of the porous medium as water leaves while salt stays behind. As the density of the water increases with increased salt concentration, the evaporation leads to a gravitational unstable setting, where density instabilities can form. Whether density instabilities form, depends on a large range of parameters like the evaporation rate and intrinsic permeability of the porous medium, but also on the water saturation. As water saturation decreases, the storage, convection and diffusion of salt also decrease, which all influence the onset of instabilities. By performing a linear stability analysis on the governing equations, we give criteria for onset of instabilities. Numerical simulations give information about the further development of these instabilities. With this knowledge we can predict whether and when density instabilities occur, and how they will influence the further development of salt concentration in the porous medium. △ Less

Submitted 22 January, 2025; originally announced January 2025.

Phase-field modeling and effective simulation of non-isothermal reactive transport

Authors: Carina Bringedal, Alexander Jaust

Abstract: We consider single-phase flow with solute transport where ions in the fluid can precipitate and form a mineral, and where the mineral can dissolve and release solute into the fluid. Such a setting includes an evolving interface between fluid and mineral. We approximate the evolving interface with a diffuse interface, which is modeled with an Allen-Cahn equation. We also include effects from temper… ▽ More We consider single-phase flow with solute transport where ions in the fluid can precipitate and form a mineral, and where the mineral can dissolve and release solute into the fluid. Such a setting includes an evolving interface between fluid and mineral. We approximate the evolving interface with a diffuse interface, which is modeled with an Allen-Cahn equation. We also include effects from temperature such that the reaction rate can depend on temperature, and allow heat conduction through fluid and mineral. As Allen-Cahn is generally not conservative due to curvature-driven motion, we include a reformulation that is conservative. This reformulation includes a non-local term which makes the use of standard Newton iterations for solving the resulting non-linear system of equations very slow. We instead apply L-scheme iterations, which can be proven to converge for any starting guess, although giving only linear convergence. The three coupled equations for diffuse interface, solute transport and heat transport are solved via an iterative coupling scheme. This allows the three equations to be solved more efficiently compared to a monolithic scheme, and only few iterations are needed for high accuracy. Through numerical experiments we highlight the usefulness and efficiency of the suggested numerical scheme and the applicability of the resulting model. △ Less

Submitted 23 July, 2023; originally announced July 2023.

MSC Class: 35R37; 65M08; 65M22; 76D10; 76D05; 76V05; 80A32; 80M12

Upscaling and Effective Behavior for Two-Phase Porous-Medium Flow using a Diffuse Interface Model

Authors: Mathis Kelm, Carina Bringedal, Bernd Flemisch

Abstract: We investigate two-phase flow in porous media and derive a two-scale model, which incorporates pore-scale phase distribution and surface tension into the effective behavior at the larger Darcy scale. The free-boundary problem at the pore scale is modeled using a diffuse interface approach in the form of a coupled Allen-Cahn Navier-Stokes system with an additional momentum flux due to surface tensi… ▽ More We investigate two-phase flow in porous media and derive a two-scale model, which incorporates pore-scale phase distribution and surface tension into the effective behavior at the larger Darcy scale. The free-boundary problem at the pore scale is modeled using a diffuse interface approach in the form of a coupled Allen-Cahn Navier-Stokes system with an additional momentum flux due to surface tension forces. Using periodic homogenization and formal asymptotic expansions, a two-scale model with cell problems for phase evolution and velocity contributions is derived. We investigate the computed effective parameters and their relation to the saturation for different fluid distributions, in comparison to commonly used relative permeability saturation curves. The two-scale model yields non-monotone relations for relative permeability and saturation. The strong dependence on local fluid distribution and effects captured by the cell problems highlights the importance of incorporating pore-scale information into the macro-scale equations. △ Less

Submitted 30 June, 2023; originally announced June 2023.

Solution approaches for evaporation-driven density instabilities in a slab of saturated porous media

Authors: Leon H. Kloker, Carina Bringedal

Abstract: This work considers the gravitational instability of a saline boundary layer formed by an evaporation-induced flow through a fully-saturated porous slab. Evaporation of saline waters can eventually result in the formation of salt lakes as salt accumulates. As natural convection can impede the accumulation of salt, establishing a relation between its occurrence and the value of physical parameters… ▽ More This work considers the gravitational instability of a saline boundary layer formed by an evaporation-induced flow through a fully-saturated porous slab. Evaporation of saline waters can eventually result in the formation of salt lakes as salt accumulates. As natural convection can impede the accumulation of salt, establishing a relation between its occurrence and the value of physical parameters such as evaporation rate, height of the slab or porosity is crucial. One step towards determining when gravitational instabilities can arise is to compute the ground-state salinity, that evolves due to the uniform upwards flow caused by evaporation. The resulting salt concentration profile exhibits a sharply increasing salt concentration near the surface, which can lead to a gravitationally unstable setting. In this work, this ground state is analytically derived within the framework of Sturm-Liouville theory. Then, the method of linear stability in conjunction with the quasi-steady state approach is employed to investigate the occurrence of instabilities. These instabilities can develop and grow over time depending on the Rayleigh number and the dimensionless height of the porous medium. To calculate the critical Rayleigh number, which can determine the stability of a particular system, the eigenvalues of the linear perturbation equations have to be computed. Here, a novel fundamental matrix method is proposed to solve this eigenvalue problem and shown to coincide with an established Chebyshev-Galerkin method in their shared range of applicability. Finally, a 2-dimensional direct numerical simulation of the full equation system via the finite volume method is employed to validate the time of onset of convective instabilities predicted by the linear theory. Moreover, the fully nonlinear convection patterns are analyzed. △ Less

Submitted 15 July, 2022; originally announced July 2022.

Two-phase flow dynamics at the interface between GDL and gas distributor channel using a pore-network model

Authors: Cynthia Michalkowski, Maziar Veyskarami, Carina Bringedal, Rainer Helmig, Veronika Schleper

Abstract: For improved operating conditions of a polymer electrolyte membrane (PEM) fuel cell, a sophisticated water management is crucial. Therefore, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. Pore-scale modeling of diffusion layers and gas distributor has been established as a fa… ▽ More For improved operating conditions of a polymer electrolyte membrane (PEM) fuel cell, a sophisticated water management is crucial. Therefore, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. Pore-scale modeling of diffusion layers and gas distributor has been established as a favorable technique to investigate the ongoing processes. Investigating the interface between the cathode layers, a particular challenge is the combination and interaction of the multi-phase flow in the porous material of the gas diffusion layer (GDL) with the free flow in the gas distributor channels. The formation, growth and detachment of water droplets on the hydrophobic, porous surface of the GDL have a major influence on the mass, momentum and energy exchange between the layers. A dynamic pore-network model is used to describe the flow through the porous GDL on the pore-scale. To capture the droplet occurrence and its influence on the flow, this dynamic two-phase pore-network model is extended to capture droplet formation and growth at the surface of the GDL as well as droplet detachment due to the gas flow in the gas distributor channels. In this article, the developed model is applied to single- and multi-tube systems to investigate the general drop behavior. These rather simple test-cases are compared to experimental and numerical data available in the literature. Finally, the model is applied to a GDL unit cell to analyse the interaction between two-phase flow through the GDL and drop formation at the interface between GDL and gas distributor channel. △ Less

Submitted 28 January, 2022; originally announced January 2022.

Comments: 18 pages plus appendix, 18 figures, submitted to Transport in Porous Media (Springer)

Evaporation-driven density instabilities in saturated porous media

Authors: Carina Bringedal, Theresa Schollenberger, G. J. M. Pieters, C. J. van Duijn, Rainer Helmig

Abstract: Soil salinization is a major cause of soil degradation and hampers plant growth. For soils saturated with saline water, the evaporation of water induces accumulation of salt near the top of the soil. The remaining liquid gets an increasingly larger density due to the accumulation of salt, giving a gravitationally unstable situation, where instabilities in the form of fingers can form. These finger… ▽ More Soil salinization is a major cause of soil degradation and hampers plant growth. For soils saturated with saline water, the evaporation of water induces accumulation of salt near the top of the soil. The remaining liquid gets an increasingly larger density due to the accumulation of salt, giving a gravitationally unstable situation, where instabilities in the form of fingers can form. These fingers can hence lead to a net downwards transport of salt. We here investigate the appearance of these fingers through a linear stability analysis and through numerical simulations. The linear stability analysis gives criteria for onset of instabilities for a large range of parameters. Simulations using a set of parameters give information also about the development of the fingers after onset. With this knowledge we can predict whether and when the instabilities occur, and their effect on the salt concentration development near the top boundary. △ Less

Submitted 28 August, 2021; originally announced August 2021.

MSC Class: 76S05; 76E20; 35P15; 65L60; 65M08

Multi-scale three-domain approach for coupling free flow and flow in porous media including droplet-related interface processes

Authors: Sina Ackermann, Carina Bringedal, Rainer Helmig

Abstract: Drops on a free-flow/porous-medium-flow interface have a strong influence on the exchange of mass, momentum and energy between the two macroscopic flow regimes. Modeling droplet-related pore-scale processes in a macro-scale context is challenging due to the scale gap, but might be rewarding due to relatively low computational costs. We develop a three-domain approach to model drop formation, growt… ▽ More Drops on a free-flow/porous-medium-flow interface have a strong influence on the exchange of mass, momentum and energy between the two macroscopic flow regimes. Modeling droplet-related pore-scale processes in a macro-scale context is challenging due to the scale gap, but might be rewarding due to relatively low computational costs. We develop a three-domain approach to model drop formation, growth, detachment and film flow in a lower-dimensional interface domain. A simple upscaling technique allows to compute the drop-covered interface area fraction which affects the coupling fluxes. In a first scenario, only drop formation, growth and detachment are taken into account. Then, spreading and merging due to lateral fluxes are considered as well. The simulation results show that the impact of these droplet-related processes can be captured. However, extensions are necessary to represent the influence on the free flow more precisely. △ Less

Submitted 10 July, 2020; originally announced July 2020.

Comments: 19 pages, 18 figures