-
Classical Interfaces for Controlling Cryogenic Quantum Computing Technologies
Authors:
Jack C. Brennan,
Joao Barbosa,
Chong Li,
Meraj Ahmad,
Fiheon Imroze,
Calum Rose,
Wridhdhisom Karar,
Manoj Stanley,
Hadi Heidari,
Nick M. Ridler,
Martin Weides
Abstract:
Quantum processors have the potential to revolutionise computing on a scale unseen since the development of semiconductor technology in the middle of the 20th century. However, while there is now huge activity and investment in the field, there are a number of challenges that must be overcome before the technology can be fully realised. Of primary concern is the development of the classical techno…
▽ More
Quantum processors have the potential to revolutionise computing on a scale unseen since the development of semiconductor technology in the middle of the 20th century. However, while there is now huge activity and investment in the field, there are a number of challenges that must be overcome before the technology can be fully realised. Of primary concern is the development of the classical technology required to interface with quantum systems, as we push towards a new era of high-performance, large-scale quantum computing.
In this review, we briefly discuss some of the main challenges facing the development of universally useful quantum computers and the different architectures being investigated. We are primarily concerned with cryogenic quantum systems. These systems are among the most mature quantum computing architectures to date, and are garnering a lot of both industrial and academic attention.
We present and analyse the leading methods of interfacing with quantum processors, both now and for the next generation of larger, multi-qubit systems. Recent advancements in control cryoelectronics, both semiconducting and superconducting, are covered, while a view towards newer methods such as optical and wireless qubit interfaces are also presented.
△ Less
Submitted 25 April, 2025;
originally announced April 2025.
-
Bridging Machine Learning and Cosmological Simulations: Using Neural Operators to emulate Chemical Evolution
Authors:
Pelle van de Bor,
John Brennan,
John A. Regan,
Jonathan Mackey
Abstract:
The computational expense of solving non-equilibrium chemistry equations in astrophysical simulations poses a significant challenge, particularly in high-resolution, large-scale cosmological models. In this work, we explore the potential of machine learning, specifically Neural Operators, to emulate the Grackle chemistry solver, which is widely used in cosmological hydrodynamical simulations. Neur…
▽ More
The computational expense of solving non-equilibrium chemistry equations in astrophysical simulations poses a significant challenge, particularly in high-resolution, large-scale cosmological models. In this work, we explore the potential of machine learning, specifically Neural Operators, to emulate the Grackle chemistry solver, which is widely used in cosmological hydrodynamical simulations. Neural Operators offer a mesh-free, data-driven approach to approximate solutions to coupled ordinary differential equations governing chemical evolution, gas cooling, and heating. We construct and train multiple Neural Operator architectures (DeepONet variants) using a dataset derived from cosmological simulations to optimize accuracy and efficiency. Our results demonstrate that the trained models accurately reproduce Grackle's outputs with an average error of less than 0.6 dex in most cases, though deviations increase in highly dynamic chemical environments. Compared to Grackle, the machine learning models provide computational speedups of up to a factor of six in large-scale simulations, highlighting their potential for reducing computational bottlenecks in astrophysical modeling. However, challenges remain, particularly in iterative applications where accumulated errors can lead to numerical instability. Additionally, the performance of these machine learning models is constrained by their need for well-represented training datasets and the limited extrapolation capabilities of deep learning methods. While promising, further development is required for Neural Operator-based emulators to be fully integrated into astrophysical simulations. Future work should focus on improving stability over iterative timesteps and optimizing implementations for hardware acceleration. This study provides an initial step toward the broader adoption of machine learning approaches in astrophysical chemistry solvers.
△ Less
Submitted 13 March, 2025;
originally announced March 2025.
-
RSFQ All-Digital Programmable Multi-Tone Generator For Quantum Applications
Authors:
João Barbosa,
Jack C. Brennan,
Alessandro Casaburi,
M. D. Hutchings,
Alex Kirichenko,
Oleg Mukhanov,
Martin Weides
Abstract:
One of the most important and topical challenges of quantum circuits is their scalability. Rapid Single Flux Quantum (RSFQ) technology is at the forefront of replacing current standard CMOS-based control architectures for a number of applications, including quantum computing and quantum sensor arrays. By condensing the control and readout to SFQ-based on-chip devices that are directly connected to…
▽ More
One of the most important and topical challenges of quantum circuits is their scalability. Rapid Single Flux Quantum (RSFQ) technology is at the forefront of replacing current standard CMOS-based control architectures for a number of applications, including quantum computing and quantum sensor arrays. By condensing the control and readout to SFQ-based on-chip devices that are directly connected to the quantum systems, it is possible to minimise the total system overhead, improving scalability and integration. In this work, we present a novel RSFQ device that generates multi tone digital signals, based on complex pulse train sequences using a Circular Shift Register (CSR) and a comb filter stage. We show that the frequency spectrum of the pulse trains is dependent on a preloaded pattern on the CSR, as well as on the delay line of the comb filter stage. By carefully selecting both the pattern and delay, the desired tones can be isolated and amplified as required. Finally, we propose architectures where this device can be implemented to control and readout arrays of quantum devices, such as qubits and single photon detectors.
△ Less
Submitted 13 November, 2024;
originally announced November 2024.
-
On resolving meso-scale calculations of pore-collapse-generated hotspots in energetic crystals for consistency with atomistic models
Authors:
Chukwudubem Okafor,
Jacob Herrin,
Catalin R. Picu,
Tommy Sewell,
John Brennan,
James Larentzos,
H. S. Udaykumar
Abstract:
Meso-scale calculations of pore collapse and hotspot formation in energetic crystals provide closure models to macro-scale hydrocodes for predicting the shock sensitivity of energetic materials. To this end, previous works obtained atomistics-consistent material models for two common energetic crystals, HMX and RDX, such that pore collapse calculations adhered closely to molecular dynamics (MD) re…
▽ More
Meso-scale calculations of pore collapse and hotspot formation in energetic crystals provide closure models to macro-scale hydrocodes for predicting the shock sensitivity of energetic materials. To this end, previous works obtained atomistics-consistent material models for two common energetic crystals, HMX and RDX, such that pore collapse calculations adhered closely to molecular dynamics (MD) results on key features of energy localization, particularly the profiles of the collapsing pores, appearance of shear bands, and the transition from viscoplastic to hydrodynamic collapse. However, some important aspects such as the temperature distributions in the hotspot were not as well captured. One potential issue was noted but not resolved adequately in those works, namely the grid resolution that should be employed in the meso-scale calculations for various pore sizes and shock strengths. Conventional computational mechanics guidelines for selecting meshes as fine as possible, balancing computational effort, accuracy and grid independence, were shown not to produce physically consistent features associated with shear localization. Here, we examine the physics of pore collapse, shear band evolution and structure, and hotspot formation, for both HMX and RDX; we then evaluate under what conditions atomistics-consistent models yield physically correct (considering MD as ground truth) hotspots for a range of pore diameters, from nm to microns, and for a wide range of shock strengths. The study provides insights into the effects of pore size and shock strength on pore collapse and hotspots, identifying aspects such as size-independent behaviors, and proportion of energy contained in shear as opposed to jet impact-heated regions of the hotspot. Areas for further improvement of atomistics-consistent material models are also indicated.
△ Less
Submitted 29 October, 2024;
originally announced October 2024.
-
Design and test of 704 MHz and 2.1 GHz normal conducting cavities for Low Energy RHIC electron Cooler
Authors:
Binping Xiao,
S. Belomestnykh,
J. M. Brennan,
J. C. Brutus,
G. McIntyre,
K. Mernick,
C. Pai,
K. Smith,
T. Xin,
A. Zaltsman,
V. Veshcherevich
Abstract:
The Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL to improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon. The linac of LEReC consists of a DC photoemission gun, one 704 MHz superconducting radio frequency (SRF) booster cavity, and three normal conducting cavities. It is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with peak-to-peak…
▽ More
The Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL to improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon. The linac of LEReC consists of a DC photoemission gun, one 704 MHz superconducting radio frequency (SRF) booster cavity, and three normal conducting cavities. It is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with peak-to-peak momentum spread dp/p of less than 7e4. Two of the three normal conducting cavities will be used in LEReC for energy spread correction. A single-cell 704 MHz cavity for energy de-chirping and a three-cell 2.1 GHz third harmonic cavity for RF curvature correction. In this paper, we present the designs and RF test results of these two cavities.
△ Less
Submitted 5 April, 2018;
originally announced April 2018.
-
Single-Volume Neutron Scatter Camera for High-Efficiency Neutron Imaging and Spectroscopy
Authors:
Joshua Braverman,
James Brennan,
Erik Brubaker,
Belkis Cabrera-Palmer,
Steven Czyz,
Peter Marleau,
John Mattingly,
Aaron Nowack,
John Steele,
Melinda Sweany,
Kyle Weinfurther,
Eli Woods
Abstract:
Neutron detection provides an effective method to detect, locate, and characterize sources of interest to nuclear security applications. Current neutron imaging systems based on double-scatter kinematic reconstruction provide good signal vs. background discrimination and spectral capability, but suffer from poor sensitivity due to geometrical constraints. This weakness can be overcome if both neut…
▽ More
Neutron detection provides an effective method to detect, locate, and characterize sources of interest to nuclear security applications. Current neutron imaging systems based on double-scatter kinematic reconstruction provide good signal vs. background discrimination and spectral capability, but suffer from poor sensitivity due to geometrical constraints. This weakness can be overcome if both neutron-proton scattering interactions are detected and resolved within one large contiguous active detector volume. We describe here a maximum likelihood approach to event reconstruction in a single-volume system with no optical segmentation and sensitivity to individual optical photons on the surfaces of the scintillator. We present results from a Geant4-based simulation establishing the feasibility of this single-volume neutron scatter camera concept given notional performance of existing photodetector and readout technologies.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
Extreme waves in crossing sea states
Authors:
J. Brennan,
J. M. Dudley,
F. Dias
Abstract:
The evolution of crossing sea states and the emergence of rogue waves in such systems are studied via numerical simulations performed using a higher order spectral method to solve the free surface Euler equations with a flat bottom. Two classes of crossing sea states are analysed: one using directional spectra from the Draupner wave crossing at different angles, another considering a Draupner-like…
▽ More
The evolution of crossing sea states and the emergence of rogue waves in such systems are studied via numerical simulations performed using a higher order spectral method to solve the free surface Euler equations with a flat bottom. Two classes of crossing sea states are analysed: one using directional spectra from the Draupner wave crossing at different angles, another considering a Draupner-like spectra crossed with a narrowband JONSWAP state to model spectral growth between wind sea and swell. These two classes of crossing sea states are constructed using the spectral output of a WAVEWATCH III hindcast on the Draupner rogue wave event. We measure ensemble statistical moments as functions of time, finding that although the crossing angle influences the statistical evolution to some degree, there are no significant third order effects present. Additionally, we pay particular attention to the mean sea level measured beneath extreme crest heights, the elevation of which (set up or set down) is shown to be related to the spectral content in the low wavenumber region of the corresponding spectrum.
△ Less
Submitted 10 February, 2018;
originally announced February 2018.
-
Source detection at 100 meter standoff with a time-encoded imaging system
Authors:
J. Brennan,
E. Brubaker,
M. Gerling,
P. Marleau,
M. Monterial,
A. Nowack,
P. Schuster,
B. Sturm,
M. Sweany
Abstract:
We present the design, characterization, and testing of a laboratory prototype radiological search and localization system. The system, based on time-encoded imaging, uses the attenuation signature of neutrons in time, induced by the geometrical layout and motion of the system. We have demonstrated the ability to detect a ~1 mCi Cf-252 radiological source at 100 m standoff with 90% detection effic…
▽ More
We present the design, characterization, and testing of a laboratory prototype radiological search and localization system. The system, based on time-encoded imaging, uses the attenuation signature of neutrons in time, induced by the geometrical layout and motion of the system. We have demonstrated the ability to detect a ~1 mCi Cf-252 radiological source at 100 m standoff with 90% detection efficiency and 10% false positives against background in 12 min. This same detection efficiency is met at 15 s for a 40 m standoff, and 1.2 s for a 20 m standoff.
△ Less
Submitted 5 September, 2017; v1 submitted 13 June, 2017;
originally announced June 2017.
-
A compact neutron scatter camera for field deployment
Authors:
John E. M. Goldsmith,
Mark D. Gerling,
James S. Brennan
Abstract:
We describe a very compact (0.9 m high, 0.4 m diameter, 40 kg) battery operable neutron scatter camera designed for field deployment. Unlike most other systems, the configuration of the sixteen liquid-scintillator detection cells are arranged to provide omnidirectional (4π) imaging with sensitivity comparable to a conventional two-plane system. Although designed primarily to operate as a neutron s…
▽ More
We describe a very compact (0.9 m high, 0.4 m diameter, 40 kg) battery operable neutron scatter camera designed for field deployment. Unlike most other systems, the configuration of the sixteen liquid-scintillator detection cells are arranged to provide omnidirectional (4π) imaging with sensitivity comparable to a conventional two-plane system. Although designed primarily to operate as a neutron scatter camera for localizing energetic neutron sources, it also functions as a Compton camera for localizing gamma sources. In addition to describing the radionuclide source localization capabilities of this system, we demonstrate how it provides neutron spectra that can distinguish plutonium metal from plutonium oxide sources, in addition to the easier task of distinguishing AmBe from fission sources.
△ Less
Submitted 12 October, 2016;
originally announced October 2016.
-
Ultra-sensitive label-free in-situ detection of dynamically driven self-assembly of 2D nanoplatelets on SOI chip
Authors:
Benjamin T. Hogan,
Sergey Dyakov,
Lorcan J. Brennan,
Salma Younesy,
Tatiana Perova,
Yurii K. Gunko,
Monica F. Craciun,
Anna Baldycheva
Abstract:
Fluid dispersed two-dimensional (2D) composite materials with dynamically tunable functional properties have recently emerged as a novel highly promising class of optoelectronic materials, opening up new routes not only for the emerging field of metamaterials but also to chip-scale multifunctional metadevices. However, in-situ monitoring and detection of the dynamic ordering of 2D nanoparticles on…
▽ More
Fluid dispersed two-dimensional (2D) composite materials with dynamically tunable functional properties have recently emerged as a novel highly promising class of optoelectronic materials, opening up new routes not only for the emerging field of metamaterials but also to chip-scale multifunctional metadevices. However, in-situ monitoring and detection of the dynamic ordering of 2D nanoparticles on chip and during the device operation is still a huge challenge. Here we introduce a novel approach for on-chip, in-situ Raman characterisation of 2D-fluid composite materials incorporated into Si photonics chip. In this work the Raman signal for 2D nanoplatelets is selectively enhanced by Fabry-Perot resonator design of CMOS photonic-compatible microfluidic channels. This has then been extended to demonstrate the first in-situ Raman detection of the dynamics of individual 2D nanoplatelets, within a microfluidic channel. Our work paves the way for the first practicable realisation of 3D photonic microstructure shaping based on 2D-fluid composites and CMOS photonics platform.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
Recent RHIC in-situ coating technology developments
Authors:
A. Hershcovitch,
M. Blaskiewicz,
J. M. Brennan,
A. Chawla,
W. Fischer,
C-J Liaw,
W. Meng,
R. Todd,
A. Custer,
M. Erickson,
N. Jamshidi,
P. Kobrin,
R. Laping,
H. J. Poole,
J. M. Jimenez,
H. Neupert,
M. Taborelli,
C. Yin-Vallgren,
N. Sochugov
Abstract:
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started developing a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) c…
▽ More
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started developing a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) coating. The Cu coating reduces wall resistivity, while a-C has low SEY that suppresses electron cloud formation. Recent RF resistivity computations indicate that 10 μm of Cu coating thickness is needed. But, Cu coatings thicker than 2 μm can have grain structures that might have lower SEY like gold black. A 15-cm Cu cathode magnetron was designed and fabricated, after which, 30 cm long samples of RHIC cold bore tubes were coated with various OFHC copper thicknesses; room temperature RF resistivity measured. Rectangular stainless steel and SS discs were Cu coated. SEY of rectangular samples were measured at room; and, SEY of a disc sample was measured at cryogenic temperatures.
△ Less
Submitted 1 August, 2013;
originally announced August 2013.
-
RHIC Low-Energy Challenges and Plans
Authors:
T. Satogata,
L. Ahrens,
M. Bai,
J. M. Brennan,
D. Bruno,
J. Butler,
A. Drees,
A. Fedotov,
W. Fischer,
M. Harvey,
T. Hayes,
W. Jappe,
R. C. Lee,
W. W. MacKay,
N. Malitsky,
G. Marr,
R. Michnoff,
B. Oerter,
E. Pozdeyev,
T. Roser,
F. Severino,
K. Smith,
S. Tepikian,
N. Tsoupas
Abstract:
There is significant interest in RHIC heavy ion collisions at $\sqrt{s_{NN}}=$5--50 GeV, motivated by a search for the QCD phase transition critical point. The lowest energies for this search are well below the nominal RHIC gold injection collision energy of $\sqrt{s_{NN}}=19.6$ GeV. There are several operations challenges at RHIC in this regime, including longitudinal acceptance, magnet field q…
▽ More
There is significant interest in RHIC heavy ion collisions at $\sqrt{s_{NN}}=$5--50 GeV, motivated by a search for the QCD phase transition critical point. The lowest energies for this search are well below the nominal RHIC gold injection collision energy of $\sqrt{s_{NN}}=19.6$ GeV. There are several operations challenges at RHIC in this regime, including longitudinal acceptance, magnet field quality, lattice control, and luminosity monitoring. We report on the status of work to address these challenges, including results from beam tests of low energy RHIC operations with protons and gold, and potential improvements from different beam cooling scenarios.
△ Less
Submitted 12 October, 2007;
originally announced October 2007.
-
Experimental Results from an Antineutrino Detector for Cooperative Monitoring of Nuclear Reactors
Authors:
N. S. Bowden,
A. Bernstein,
M. Allen,
J. S. Brennan,
M. Cunningham,
J. K. Estrada,
C. M. R. Greaves,
C. Hagmann,
J. Lund,
W. Mengesha,
T. D. Weinbeck,
C. D. Winant
Abstract:
Our collaboration has designed, installed, and operated a compact antineutrino detector at a nuclear power station, for the purpose of monitoring the power and plutonium content of the reactor core. This paper focuses on the basic properties and performance of the detector. We describe the site, the reactor source, and the detector, and provide data that clearly show the expected antineutrino si…
▽ More
Our collaboration has designed, installed, and operated a compact antineutrino detector at a nuclear power station, for the purpose of monitoring the power and plutonium content of the reactor core. This paper focuses on the basic properties and performance of the detector. We describe the site, the reactor source, and the detector, and provide data that clearly show the expected antineutrino signal. Our data and experience demonstrate that it is possible to operate a simple, relatively small, antineutrino detector near a reactor, in a non-intrusive and unattended mode for months to years at a time, from outside the reactor containment, with no disruption of day-to-day operations at the reactor site. This unique real-time cooperative monitoring capability may be of interest for the International Atomic Energy Agency (IAEA) reactor safeguards program and similar regimes.
△ Less
Submitted 15 December, 2006;
originally announced December 2006.
