-
The Linear Collider Facility (LCF) at CERN
Authors:
H. Abramowicz,
E. Adli,
F. Alharthi,
M. Almanza-Soto,
M. M. Altakach,
S. Ampudia Castelazo,
D. Angal-Kalinin,
J. A. Anguiano,
R. B. Appleby,
O. Apsimon,
A. Arbey,
O. Arquero,
D. Attié,
J. L. Avila-Jimenez,
H. Baer,
Y. Bai,
C. Balazs,
P. Bambade,
T. Barklow,
J. Baudot,
P. Bechtle,
T. Behnke,
A. B. Bellerive,
S. Belomestnykh,
Y. Benhammou
, et al. (386 additional authors not shown)
Abstract:
In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr…
▽ More
In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC.
△ Less
Submitted 19 June, 2025; v1 submitted 31 March, 2025;
originally announced March 2025.
-
A Linear Collider Vision for the Future of Particle Physics
Authors:
H. Abramowicz,
E. Adli,
F. Alharthi,
M. Almanza-Soto,
M. M. Altakach,
S Ampudia Castelazo,
D. Angal-Kalinin,
R. B. Appleby,
O. Apsimon,
A. Arbey,
O. Arquero,
A. Aryshev,
S. Asai,
D. Attié,
J. L. Avila-Jimenez,
H. Baer,
J. A. Bagger,
Y. Bai,
I. R. Bailey,
C. Balazs,
T Barklow,
J. Baudot,
P. Bechtle,
T. Behnke,
A. B. Bellerive
, et al. (391 additional authors not shown)
Abstract:
In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much…
▽ More
In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC.
△ Less
Submitted 29 September, 2025; v1 submitted 25 March, 2025;
originally announced March 2025.
-
Higgs Factory Considerations
Authors:
J. A. Bagger,
B. C. Barish,
S. Belomestnykh,
P. C. Bhat,
J. E. Brau,
M. Demarteau,
D. Denisov,
S. C. Eno,
C. G. R. Geddes,
P. D. Grannis,
A. Hutton,
A. J. Lankford,
M. U. Liepe,
D. B. MacFarlane,
T. Markiewicz,
H. E. Montgomery,
J. R. Patterson,
M. Perelstein,
M. E. Peskin,
M. C. Ross,
J. Strube,
A. P. White,
G. W. Wilson
Abstract:
We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena.
We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena.
△ Less
Submitted 17 March, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Updating the SiD Detector concept
Authors:
M. Breidenbach,
J. E. Brau,
P. Burrows,
T. Markiewicz,
M. Stanitzki,
J. Strube,
A. P. White
Abstract:
The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momen…
▽ More
The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momentum resolution. The highly granular calorimeter system is optimized for Particle Flow application to achieve very good jet energy resolution over a wide range of energies. With a potential construction date of the ILC moving closer, it is now the time to review the design and technology decision that have been made during the DBD phase and reconsider them in the light of the recent technological advances. For each area of SiD development R&D topics and opportunities for participation will be discussed.
△ Less
Submitted 19 May, 2025; v1 submitted 19 October, 2021;
originally announced October 2021.
-
Energy Correction in Reduced SiD Electromagnetic Calorimeter
Authors:
Lucas Braun,
Jason T. Barkeloo,
James E. Brau,
Christopher T. Potter
Abstract:
SiD is a robust, silicon-based detector proposed for the International Linear Collider (ILC). SiD employs a sampling silicon-tungsten electromagnetic calorimeter (ECal) to accurately measure the energies of electrons, positrons, and photons produced in collisions, and to contribute to jet energy measurements through the particle flow technique. Due to the nature of the detector and its design cons…
▽ More
SiD is a robust, silicon-based detector proposed for the International Linear Collider (ILC). SiD employs a sampling silicon-tungsten electromagnetic calorimeter (ECal) to accurately measure the energies of electrons, positrons, and photons produced in collisions, and to contribute to jet energy measurements through the particle flow technique. Due to the nature of the detector and its design constraints, a portion of the electron, positron, and photon energy exits the ECal undetected. Here, we establish a methodology for estimating the exiting energy and correctly determining the energies of electrons (and photons) in the ECal by analyzing patterns in the total energy deposition in each layer using neural networks. We studied a reduced calorimeter design with fewer layers (16 thin layers, 8 thick layers) than the proposed SiD design (20 thin layers, 10 thick layers) to evaluate if the resulting energy leakage could be determined and corrected. We evaluated the effectiveness of the correction on various electron energies and incidence angles in a Geant4 simple stack as well as in a modified version of the full DD4hep SiD model. The correction methodology showed significant improvement in measurement accuracy and resolution over uncorrected events, especially at high energies and shallow angles. These results provide a basis for effective energy correction in the SiD ECal and suggest that precise energy measurements with a smaller, less expensive ECal are viable.
△ Less
Submitted 13 February, 2020;
originally announced February 2020.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.
-
The International Linear Collider
Authors:
Barry Barish,
James E. Brau
Abstract:
In this article, we describe the key features of the recently completed technical design for the International Linear Collider (ILC), a 200-500 GeV linear electron-positron collider (expandable to 1 TeV) that is based on 1.3 GHz superconducting radio-frequency (SCRF) technology. The machine parameters and detector characteristics have been chosen to complement the Large Hadron Collider physics, in…
▽ More
In this article, we describe the key features of the recently completed technical design for the International Linear Collider (ILC), a 200-500 GeV linear electron-positron collider (expandable to 1 TeV) that is based on 1.3 GHz superconducting radio-frequency (SCRF) technology. The machine parameters and detector characteristics have been chosen to complement the Large Hadron Collider physics, including the discovery of the Higgs boson, and to further exploit this new particle physics energy frontier with a precision instrument. The linear collider design is the result of nearly twenty years of R&D, resulting in a mature conceptual design for the ILC project that reflects an international consensus. We summarize the physics goals and capability of the ILC, the enabling R&D and resulting accelerator design, as well as the concepts for two complementary detectors. The ILC is technically ready to be proposed and built as a next generation lepton collider, perhaps to be built in stages beginning as a Higgs factory.
△ Less
Submitted 14 November, 2013;
originally announced November 2013.
-
The International Linear Collider Technical Design Report - Volume 4: Detectors
Authors:
Ties Behnke,
James E. Brau,
Philip N. Burrows,
Juan Fuster,
Michael Peskin,
Marcel Stanitzki,
Yasuhiro Sugimoto,
Sakue Yamada,
Hitoshi Yamamoto
Abstract:
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the…
▽ More
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
The International Linear Collider Technical Design Report - Volume 1: Executive Summary
Authors:
Ties Behnke,
James E. Brau,
Brian Foster,
Juan Fuster,
Mike Harrison,
James McEwan Paterson,
Michael Peskin,
Marcel Stanitzki,
Nicholas Walker,
Hitoshi Yamamoto
Abstract:
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the…
▽ More
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
Development of Readout Interconnections for the Si-W Calorimeter of SiD
Authors:
M. Woods,
R. G. Fields,
B. Holbrook,
R. L. Lander,
A. Moskaleva,
C. Neher,
J. Pasner,
M. Tripathi,
J. E. Brau,
R. E. Frey,
D. Strom,
M. Breidenbach,
D. Freytag,
G. Haller,
R. Herbst,
T. Nelson,
S. Schier,
B. Schumm
Abstract:
The SiD collaboration is developing a Si-W sampling electromagnetic calorimeter, with anticipated application for the International Linear Collider. Assembling the modules for such a detector will involve special bonding technologies for the interconnections, especially for attaching a silicon detector wafer to a flex cable readout bus. We review the interconnect technologies involved, including o…
▽ More
The SiD collaboration is developing a Si-W sampling electromagnetic calorimeter, with anticipated application for the International Linear Collider. Assembling the modules for such a detector will involve special bonding technologies for the interconnections, especially for attaching a silicon detector wafer to a flex cable readout bus. We review the interconnect technologies involved, including oxidation removal processes, pad surface preparation, solder ball selection and placement, and bond quality assurance. Our results show that solder ball bonding is a promising technique for the Si-W ECAL, and unresolved issues are being addressed.
△ Less
Submitted 21 November, 2011; v1 submitted 31 October, 2011;
originally announced October 2011.
-
Recent Developments in Detector Technology
Authors:
James E. Brau
Abstract:
This review provides an overview of many recent advances in detector technologies for particle physics experiments. Challenges for new technologies include increasing spatial and temporal sensitivity, speed, and radiation hardness while minimizing power and cost. Applications are directed at several future collider experiments, including the Large Hadron Collider luminosity upgrade (sLHC), the lin…
▽ More
This review provides an overview of many recent advances in detector technologies for particle physics experiments. Challenges for new technologies include increasing spatial and temporal sensitivity, speed, and radiation hardness while minimizing power and cost. Applications are directed at several future collider experiments, including the Large Hadron Collider luminosity upgrade (sLHC), the linear collider, and the super high luminosity B factory, as well as neutrino and other fixed target experiments, and direct dark matter searches. Furthermore, particle physics has moved into space, with significant contributions of detector technology, and new challenges for future efforts.
△ Less
Submitted 12 March, 2010;
originally announced March 2010.
