-
TL properties of RE-Doped and Co-doped Sol-gel Silica Rods. Application to Passive (OSL) and Real-time (RL) Dosimetry
Authors:
Mourad Benabdesselam,
J. Bahout,
Franck Mady,
Wilfried Blanc,
Hicham El Hamzaoui,
Andy Cassez,
Karen Delplace-Baudelle,
Remi Habert,
Geraud Bouwmans,
Mohamed Bouazaoui,
Bruno Capoen
Abstract:
Two rods made from sol-gel silica have been doped with Ce ions or co-doped with Ce and Tb ions respectively. First, a thermoluminescence (TL) characterization of the trapping and luminescence parameters is carried out to understand the physical mechanisms involved following the irradiation of these rods and to evaluate their dosimetric properties. The optically stimulated luminescence (OSL) and th…
▽ More
Two rods made from sol-gel silica have been doped with Ce ions or co-doped with Ce and Tb ions respectively. First, a thermoluminescence (TL) characterization of the trapping and luminescence parameters is carried out to understand the physical mechanisms involved following the irradiation of these rods and to evaluate their dosimetric properties. The optically stimulated luminescence (OSL) and the radioluminescence (RL) responses as a function of respectively absorbed dose and dose rate are assessed. The OSL response of both rods is linear as a function of the absorbed dose. The RL sensitivity of both rods proves not only to be extremely high but also shows a linear behavior over more than 6 decades, allowing real-time detection of dose rates as low as few $μ$Gy s$^{-1}$, a threshold that to our knowledge, has never been reached. The results from RL and OSL show that these silica-based doped rods are potentially suitable for medical dosimetry and environmental monitoring around nuclear sites.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Tapered multi-core fiber for lensless endoscopes
Authors:
Fatima El Moussawi,
Matthias Hofer,
Damien Labat,
Andy Cassez,
Géraud Bouwmans,
Siddharth Sivankutty,
Rosa Cossart,
Olivier Vanvincq,
Hervé Rigneault,
Esben Ravn Andresen
Abstract:
We present a novel fiber-optic component, a "tapered multi-core fiber (MCF)", designed for integration into ultra-miniaturized endoscopes for minimally invasive two-photon point-scanning imaging and to address the power delivery issue that has faced MCF based lensless endoscopes. With it we achieve experimentally a factor 6.0 increase in two-photon signal yield while keeping the ability to point-s…
▽ More
We present a novel fiber-optic component, a "tapered multi-core fiber (MCF)", designed for integration into ultra-miniaturized endoscopes for minimally invasive two-photon point-scanning imaging and to address the power delivery issue that has faced MCF based lensless endoscopes. With it we achieve experimentally a factor 6.0 increase in two-photon signal yield while keeping the ability to point-scan by the memory effect, and a factor 8.9 sacrificing the memory effect. To reach this optimal design we first develop and validate a fast numerical model capable of predicting the essential properties of an arbitrarily tapered MCF from its structural parameters. We then use this model to identify the tapered MCF design parameters that result in a chosen set of target properties (point-spread function, delivered power, presence or absence of memory effect). We fabricate the identified target designs by stack-and-draw and post-processing on a CO$_{2}$ laser-based glass processing and splicing system. Finally we demonstrate the performance gain of the fabricated tapered MCFs in two-photon imaging when used in a lensless endoscope system. Our results show that tailoring of the taper profile brings new degrees of freedom that can be efficiently exploited for lensless endoscopes.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Miniature 120-beam coherent combiner with 3D printed optics for multicore fiber based endoscopy
Authors:
Siddharth Sivankutty,
Andrea Bertoncini,
Victor Tsvirkun,
Naveen Gajendra Kumar,
Gaelle Brévalle,
Géraud Bouwmans,
Esben Ravn Andresen,
Carlo Liberale,
Hervé Rigneault
Abstract:
We report high efficiency, miniaturized, ultra-fast coherent beam combining with 3D printed micro-optics directly on the tip of a multicore fiber bundle. The highly compact device foot-print (180 micron diameter) facilitates its incorporation into a minimally invasive ultra-thin nonlinear endoscope to perform two-photon imaging
We report high efficiency, miniaturized, ultra-fast coherent beam combining with 3D printed micro-optics directly on the tip of a multicore fiber bundle. The highly compact device foot-print (180 micron diameter) facilitates its incorporation into a minimally invasive ultra-thin nonlinear endoscope to perform two-photon imaging
△ Less
Submitted 3 March, 2022;
originally announced March 2022.
-
Flexible lensless endoscope with a conformationally invariant multi-core fiber
Authors:
Viktor Tsvirkun,
Siddharth Sivankutty,
Karen Baudelle,
Rémi Habert,
Géraud Bouwmans,
Olivier Vanvincq,
Esben Ravn Andresen,
Hervé Rigneault
Abstract:
The lensless endoscope represents the ultimate limit in miniaturization of imaging tools: an image can be transmitted through a (multi-mode or multi-core) fiber by numerical or physical inversion of the fiber's pre-measured transmission matrix. However, the transmission matrix changes completely with only minute conformational changes of the fiber, which has so far limited lensless endoscopes to f…
▽ More
The lensless endoscope represents the ultimate limit in miniaturization of imaging tools: an image can be transmitted through a (multi-mode or multi-core) fiber by numerical or physical inversion of the fiber's pre-measured transmission matrix. However, the transmission matrix changes completely with only minute conformational changes of the fiber, which has so far limited lensless endoscopes to fibers that must be kept static. In this letter we report for the first time a lensless endoscope which is exempt from the requirement of static fiber by designing and employing a custom-designed conformationally invariant fiber. We give experimental and theoretical validations and determine the parameter space over which the invariance is maintained.
△ Less
Submitted 23 May, 2019;
originally announced May 2019.
-
Single-shot non-interferometric measurement of the phase transmission matrix in multicore fibers
Authors:
Siddharth Sivankutty,
Viktor Tsvirkun,
Géraud Bouwmans,
Esben Ravn Andresen,
Dan Oron,
Hervé Rigneault,
Miguel A. Alonso
Abstract:
A simple technique for far-field single-shot non-interferometric determination of the phase transmission matrix of a multicore fiber with over 100 cores is presented. This phase retrieval technique relies on the aperiodic arrangement of the cores.
A simple technique for far-field single-shot non-interferometric determination of the phase transmission matrix of a multicore fiber with over 100 cores is presented. This phase retrieval technique relies on the aperiodic arrangement of the cores.
△ Less
Submitted 22 August, 2018;
originally announced August 2018.
-
Nonlinear imaging through a golden spiral multicore fiber
Authors:
Siddharth Sivankutty,
Viktor Tsvirkun,
Olivier Vanvincq,
Géraud Bouwmans,
Esben Andresen,
Hérve Rigneault
Abstract:
We report two-photon lensless imaging through a novel golden spiral multicore fiber. This unique layout optimizes the sidelobe levels, field of view, cross-talk, group delay and mode density to achieve a sidelobe contrast of atleast 10.9 dB. We demonstrate experimentally the ability to generate and scan a focal point with a femtosecond pulse and perform two-photon imaging.
We report two-photon lensless imaging through a novel golden spiral multicore fiber. This unique layout optimizes the sidelobe levels, field of view, cross-talk, group delay and mode density to achieve a sidelobe contrast of atleast 10.9 dB. We demonstrate experimentally the ability to generate and scan a focal point with a femtosecond pulse and perform two-photon imaging.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Widefield lensless endoscopy with a multicore fiber
Authors:
Viktor Tsvirkun,
Siddharth Sivankutty,
Géraud Bouwmans,
Ori Katz,
Esben Ravn Andresen,
Hervé Rigneault
Abstract:
We demonstrate pixelation-free real-time widefield endoscopic imaging through an aperiodic multicore fiber (MCF) without any distal opto-mechanical elements or proximal scanners. Exploiting the memory effect in MCFs the images in our system are directly obtained without any post-processing using a static wavefront correction obtained from a single calibration procedure. Our approach allows for vid…
▽ More
We demonstrate pixelation-free real-time widefield endoscopic imaging through an aperiodic multicore fiber (MCF) without any distal opto-mechanical elements or proximal scanners. Exploiting the memory effect in MCFs the images in our system are directly obtained without any post-processing using a static wavefront correction obtained from a single calibration procedure. Our approach allows for video-rate 3D widefield imaging of incoherently illuminated objects with imaging speed not limited by the wavefront shaping device refresh rate.
△ Less
Submitted 23 November, 2016;
originally announced November 2016.
-
Extended field-of-view in a lensless endoscope using an aperiodic multicore fiber
Authors:
Siddharth Sivankutty,
Viktor Tsvirkun,
Géraud Bouwmans,
Dani Kogan,
Dan Oron,
Esben Ravn Andresen,
Hervé Rigneault
Abstract:
We investigate lensless endoscopy using coherent beam combining and aperiodic multicore fibers (MCF). We show that diffracted orders, inherent to MCF with periodically arranged cores, dramatically reduce the field of view (FoV) and that randomness in MCF core positions can increase the FoV up to the diffraction limit set by a single fiber core, while maintaining MCF experimental feasibility. We de…
▽ More
We investigate lensless endoscopy using coherent beam combining and aperiodic multicore fibers (MCF). We show that diffracted orders, inherent to MCF with periodically arranged cores, dramatically reduce the field of view (FoV) and that randomness in MCF core positions can increase the FoV up to the diffraction limit set by a single fiber core, while maintaining MCF experimental feasibility. We demonstrate experimentally pixelation-free lensless endoscopy imaging over a 120 micron FoV with an aperiodic MCF designed with widely spaced cores. We show that this system is suitable to perform beam scanning imaging by simply applying a tilt to the proximal wavefront.
△ Less
Submitted 27 June, 2016;
originally announced June 2016.
-
Single shot polarimetry imaging of multicore fiber
Authors:
Siddharth Sivankutty,
Esben Ravn Andresen,
Géraud Bouwmans,
Thomas G. Brown,
Miguel A. Alonso,
Hérve Rigneault
Abstract:
We report an experimental test of single-shot polarimetry applied to the problem of real-time monitoring of the output polarization states in each core within a multicore fiber bundle. The technique uses a stress-engineered optical element together with an analyzer and provides a point spread function whose shape unambiguously reveals the polarization state of a point source. We implement this tec…
▽ More
We report an experimental test of single-shot polarimetry applied to the problem of real-time monitoring of the output polarization states in each core within a multicore fiber bundle. The technique uses a stress-engineered optical element together with an analyzer and provides a point spread function whose shape unambiguously reveals the polarization state of a point source. We implement this technique to monitor, simultaneously and in real time, the output polarization states of up to 180 single mode fiber cores in both conventional and polarization-maintaining bundles. We demonstrate also that the technique can be used to fully characterize the polarization properties of each individual ber core including eigen-polarization states, phase delay and diattenuation.
△ Less
Submitted 5 April, 2016;
originally announced April 2016.
-
Ultra-thin rigid endoscope: Two-photon imaging through a graded-index multi-mode fiber
Authors:
Siddharth Sivankutty,
Esben Ravn Andresen,
Rosa Cossart,
Géraud Bouwmans,
Serge Monneret,
Hervé Rigneault
Abstract:
Rigid endoscopes like graded-index (GRIN) lenses are known tools in biological imaging, but it is conceptually difficult to miniaturize them. In this letter, we demonstrate an ultra-thin rigid endoscope with a diameter of only 125 microns. In addition, we identify a domain where two-photon endoscopic imaging with fs-pulse excitation is possible. We validate the ultra-thin rigid endoscope consistin…
▽ More
Rigid endoscopes like graded-index (GRIN) lenses are known tools in biological imaging, but it is conceptually difficult to miniaturize them. In this letter, we demonstrate an ultra-thin rigid endoscope with a diameter of only 125 microns. In addition, we identify a domain where two-photon endoscopic imaging with fs-pulse excitation is possible. We validate the ultra-thin rigid endoscope consisting of a few cm of graded-index multi-mode fiber by using it to acquire optically sectioned two-photon fluorescence endoscopic images of three-dimensional samples.
△ Less
Submitted 16 October, 2015;
originally announced October 2015.
-
Dynamics of the modulation instability spectrum in optical fibers with oscillating dispersion
Authors:
M. Droques,
A. Kudlinski,
G. Bouwmans,
G. Martinelli,
A. Mussot
Abstract:
A simple analytical model is developed to analyze and explain the complex dynamics of the multi-peak modulation instability spectrum observed in dispersion oscillating optical fibers [M. Droques et al., 37, 4832-4834 Opt. Lett., (2012)]. We provide a simple expression for the local parametric gain which shows that each of the multiple spectral components grows thanks to a quasi-phase-matching mech…
▽ More
A simple analytical model is developed to analyze and explain the complex dynamics of the multi-peak modulation instability spectrum observed in dispersion oscillating optical fibers [M. Droques et al., 37, 4832-4834 Opt. Lett., (2012)]. We provide a simple expression for the local parametric gain which shows that each of the multiple spectral components grows thanks to a quasi-phase-matching mechanism due to the periodicity of the waveguide parameters, in good agreement with numerical simulations and experiments. This simplified model is also successfully used to tailor the multi-peak modulation instability spectrum shape. These theoretical predictions are confirmed by experiments.
△ Less
Submitted 20 December, 2012;
originally announced December 2012.
-
Harnessing the modulation instability spectrum in optical fibers with a periodic dispersion landscape
Authors:
Maxime Droques,
Alexandre Kudlinski,
Geraud Bouwmans,
Gilbert Martinelli,
Arnaud Mussot
Abstract:
We report the experimental demonstration of modulation instability process assisted by a dispersion grating in an optical fiber. A simple analytical model is developed to further analyze and explain the complex dynamics of this process, showing that each of the multiple spectral components grows thanks to a quasi phase-matching mechanism inherent to the periodicity of the waveguide parameters. Thi…
▽ More
We report the experimental demonstration of modulation instability process assisted by a dispersion grating in an optical fiber. A simple analytical model is developed to further analyze and explain the complex dynamics of this process, showing that each of the multiple spectral components grows thanks to a quasi phase-matching mechanism inherent to the periodicity of the waveguide parameters. This model is confirmed by numerical simulations and it is successfully used to tailor the multi-peak modulation instability spectrum shape. These theoretical predictions are confirmed by experiments.
△ Less
Submitted 19 July, 2012;
originally announced July 2012.
-
Simple Method for Measuring the Zero-Dispersion Wavelength in Optical Fibers
Authors:
Maxime Droques,
Benoit Barviau,
Alexandre Kudlinski,
Géraud Bouwmans,
Arnaud Mussot
Abstract:
We propose a very simple method for measuring the zero-dispersion wavelength of an optical fiber as well as the ratio between the third- and fourth-order dispersion terms. The method is based on the four wave mixing process when pumping the fiber in the normal dispersion region, and only requires the measurement of two spectra, provided that a source tunable near the zero-dispersion wavelength is…
▽ More
We propose a very simple method for measuring the zero-dispersion wavelength of an optical fiber as well as the ratio between the third- and fourth-order dispersion terms. The method is based on the four wave mixing process when pumping the fiber in the normal dispersion region, and only requires the measurement of two spectra, provided that a source tunable near the zero-dispersion wavelength is available. We provide an experimental demonstration of the method in a photonic crystal fiber and we show that the measured zero-dispersion wavelength is in good agreement with a low-coherence interferometry measurement.
△ Less
Submitted 19 July, 2012;
originally announced July 2012.
-
Experimental demonstration of multi-watt CW supercontinuum tailoring in photonic crystal fibers
Authors:
A. Kudlinski,
G. Bouwmans,
Y. Quiquempois,
A. Mussot
Abstract:
We demonstrate experimentally that the spectral broadening of CW supercontinuum can be controlled by using photonic crystal fibers with two zero-dispersion wavelengths pumped by an Yb fiber laser at 1064 nm. The spectrum is bounded by two dispersive waves whose spectral location depends on the two zero-dispersion wavelengths of the fiber. The bandwidth of the generated spectrum and the spectral…
▽ More
We demonstrate experimentally that the spectral broadening of CW supercontinuum can be controlled by using photonic crystal fibers with two zero-dispersion wavelengths pumped by an Yb fiber laser at 1064 nm. The spectrum is bounded by two dispersive waves whose spectral location depends on the two zero-dispersion wavelengths of the fiber. The bandwidth of the generated spectrum and the spectral power density may thus be tailored for particular applications, such as high-resolution optical coherence tomography or optical spectroscopy.
△ Less
Submitted 10 March, 2008;
originally announced March 2008.
