Showing 1–12 of 12 results for author: Boumediene, D

Destructive breakdown studies of irradiated LGADs at beam tests for the ATLAS HGTD

Authors: L. A. Beresford, D. E. Boumediene, L. Castillo García, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, H. El Jarrari, A. Eshkevarvakili, C. Grieco, S. Grinstein, S. Guindon, A. Howard, G. Kramberger, O. Kurdysh, R. Mazini, M. Missio, M. Morenas, O. Perrin, V. Raskina, G. Saito, S. Trincaz-Duvoid

Abstract: In the past years, it has been observed at several beam test campaigns that irradiated LGAD sensors break with a typical star shaped burn mark when operated at voltages much lower than those at which they were safely operated during laboratory tests. The study presented in this paper was designed to determine the safe operating voltage that these sensors can withstand. Many irradiated sensors from… ▽ More In the past years, it has been observed at several beam test campaigns that irradiated LGAD sensors break with a typical star shaped burn mark when operated at voltages much lower than those at which they were safely operated during laboratory tests. The study presented in this paper was designed to determine the safe operating voltage that these sensors can withstand. Many irradiated sensors from various producers were tested in two test beam facilities, DESY (Hamburg) and CERN-SPS (Geneva), as part of ATLAS High Granularity Timing Detector (HGTD) beam tests. The samples were placed in the beam and kept under bias over a long period of time in order to reach a high number of particles crossing each sensor. Both beam tests lead to a similar conclusion, that these destructive events begin to occur when the average electric field in the sensor becomes larger than 12 Volts per micrometre. △ Less

Submitted 14 July, 2023; v1 submitted 21 June, 2023; originally announced June 2023.

Comments: Published version

Journal ref: 2023 JINST 18 P07030

Performance of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector

Authors: C. Agapopoulou, L. A. Beresford, D. E. Boumediene, L. Castillo García, S. Conforti, C. de la Taille, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, P. Dinaucourt, A. Falou, V. Gautam, D. Gong, C. Grieco, S. Grinstein, S. Guindon, A. Howard, O. Kurdysh, E. Kuwertz, C. Li, N. Makovec, B. Markovic, G. Martin-Chassal, R. Mazzini, C. Milke, M. Morenas , et al. (12 additional authors not shown)

Abstract: This paper presents the design and characterisation of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector, which is planned for the High-Luminosity phase of the LHC. This prototype, called ALTIROC1, consists of a 5$\times$5-pad matrix and contains the analog part of the single-channel readout (preamplifier, discriminator, two TDCs and SRAM). Two preamplifier architectures (t… ▽ More This paper presents the design and characterisation of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector, which is planned for the High-Luminosity phase of the LHC. This prototype, called ALTIROC1, consists of a 5$\times$5-pad matrix and contains the analog part of the single-channel readout (preamplifier, discriminator, two TDCs and SRAM). Two preamplifier architectures (transimpedance and voltage) were implemented and tested. The ASIC was characterised both alone and as a module when connected to a 5$\times$5-pad array of LGAD sensors. In calibration measurements, the ASIC operating alone was found to satisfy the technical requirements for the project, with similar performances for both preamplifier types. In particular, the jitter was found to be 15$\pm$1~ps (35$\pm$1~ps) for an injected charge of 10~fC (4~fC). A degradation in performance was observed when the ASIC was connected to the LGAD array. This is attributed to digital couplings at the entrance of the preamplifiers. When the ASIC is connected to the LGAD array, the lowest detectable charge increased from 1.5~fC to 3.4~fC. As a consequence, the jitter increased for an injected charge of 4~fC. Despite this increase, ALTIROC1 still satisfies the maximum jitter specification (below 65~ps) for the HGTD project. This coupling issue also affects the time over threshold measurements and the time-walk correction can only be performed with transimpedance preamplifiers. Beam test measurements with a pion beam at CERN were also undertaken to evaluate the performance of the module. The best time resolution obtained using only ALTIROC TDC data was 46.3$\pm$0.7~ps for a restricted time of arrival range where the coupling issue is minimized. The residual time-walk contribution is equal to 23~ps and is the dominant electronic noise contribution to the time resolution at 15~fC. △ Less

Submitted 25 July, 2023; v1 submitted 15 June, 2023; originally announced June 2023.

Comments: 20 pages, 15 figures Second version submitted to JINST including minor changes applied to address journal's comments

Performance in beam tests of Carbon-enriched irradiated Low Gain Avalanche Detectors for the ATLAS High Granularity Timing Detector

Authors: S. Ali, H. Arnold, S. L. Auwens, L. A. Beresford, D. E. Boumediene, A. M. Burger, L. Cadamuro, L. Castillo García, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, D. Dannheim, V. Dao, A. Gabrielli, Y. El Ghazali, H. El Jarrari, V. Gautam, S. Grinstein, J. Guimarães da Costa, S. Guindon, X. Jia, G. Kramberger, Y. Liu, K. Ma, N. Makovec, S. Manzoni , et al. (12 additional authors not shown)

Abstract: The High Granularity Timing Detector (HGTD) will be installed in the ATLAS experiment to mitigate pile-up effects during the High Luminosity (HL) phase of the Large Hadron Collider (LHC) at CERN. Low Gain Avalanche Detectors (LGADs) will provide high-precision measurements of the time of arrival of particles at the HGTD, improving the particle-vertex assignment. To cope with the high-radiation env… ▽ More The High Granularity Timing Detector (HGTD) will be installed in the ATLAS experiment to mitigate pile-up effects during the High Luminosity (HL) phase of the Large Hadron Collider (LHC) at CERN. Low Gain Avalanche Detectors (LGADs) will provide high-precision measurements of the time of arrival of particles at the HGTD, improving the particle-vertex assignment. To cope with the high-radiation environment, LGADs have been optimized by adding carbon in the gain layer, thus reducing the acceptor removal rate after irradiation. Performances of several carbon-enriched LGAD sensors from different vendors, and irradiated with high fluences of 1.5 and 2.5 x 10^15 neq/cm2, have been measured in beam test campaigns during the years 2021 and 2022 at CERN SPS and DESY. This paper presents the results obtained with data recorded by an oscilloscope synchronized with a beam telescope which provides particle position information within a resolution of a few um. Collected charge, time resolution and hit efficiency measurements are presented. In addition, the efficiency uniformity is also studied as a function of the position of the incident particle inside the sensor pad. △ Less

Submitted 17 March, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Laser calibration of the ATLAS Tile Calorimeter during LHC Run 2

Authors: M. N. Agaras, A. Ahmad, A. Blanco, D. Boumediene, R. Bonnefoy, D. Calvet, M. Calvetti, R. Chadelas, P. Conde Muino, A. Cortes Gonzalez, M. Crouau, C. Crozatier, F. Daudon, T. Davidek, G. Di Gregorio, L. Fiorini, B. Galhardo, Ph. Gris, P. Klimek, P. Lafarguette, D. Lambert, S. Leone, A. Maio, M. Marjanovic, F. Martins , et al. (15 additional authors not shown)

Abstract: This article reports the laser calibration of the hadronic Tile Calorimeter of the ATLAS experiment in the LHC Run 2 data campaign. The upgraded Laser II calibration system is described. The system was commissioned during the first LHC Long Shutdown, exhibiting a stability better than 0.8% for the laser light monitoring. The methods employed to derive the detector calibration factors with data fro… ▽ More This article reports the laser calibration of the hadronic Tile Calorimeter of the ATLAS experiment in the LHC Run 2 data campaign. The upgraded Laser II calibration system is described. The system was commissioned during the first LHC Long Shutdown, exhibiting a stability better than 0.8% for the laser light monitoring. The methods employed to derive the detector calibration factors with data from the laser calibration runs are also detailed. These allowed to correct for the response fluctuations of the 9852 photomultiplier tubes of the Tile Calorimeter with a total uncertainty of 0.5% plus a luminosity-dependent sub-dominant term. Finally, we report the regular monitoring and performance studies using laser events in both standalone runs and during proton collisions. These studies include channel timing and quality inspection, and photomultiplier linearity and response dependence on anode current. △ Less

Submitted 5 July, 2023; v1 submitted 28 February, 2023; originally announced March 2023.

Journal ref: JINST 18 (2023) 06, P06023

Description and stability of a RPC-based calorimeter in electromagnetic and hadronic shower environments

Authors: D. Boumediene, V. Francais, J. Apostolakis, G. Folger, A. Ribon, E. Sicking, K. Goto, K. Kawagoe, M. Kuhara, T. Suehara, T. Yoshioka, A. Pingault, M. Tytgat, G. Garillot, G. Grenier, T. Kurca, I. Laktineh, B. Liu, B. Li, L. Mirabito, E. Calvo Alamillo, C. Carrillo, M. C. Fouz, H. Garcia Cabrera, J. Marin , et al. (14 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadron Calorimeter technological prototype completed in 2011 is a sampling calorimeter using Glass Resistive Plate Chamber (GRPC) detectors as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed in 2015 to beams of muons, electron… ▽ More The CALICE Semi-Digital Hadron Calorimeter technological prototype completed in 2011 is a sampling calorimeter using Glass Resistive Plate Chamber (GRPC) detectors as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed in 2015 to beams of muons, electrons, and pions of different energies at the CERN Super Proton Synchrotron. The use of this technology for future experiments requires a reliable simulation of its response that can predict its performance. GEANT4 combined with a digitization algorithm was used to simulate the prototype. It describes the full path of the signal: showering, gas avalanches, charge induction, and hit triggering. The simulation was tuned using muon tracks and electromagnetic showers for accounting for detector inhomogeneity and tested on hadronic showers collected in the test beam. This publication describes developments of the digitization algorithm. It is used to predict the stability of the detector performance against various changes in the data-taking conditions, including temperature, pressure, magnetic field, GRPC width variations, and gas mixture variations. These predictions are confronted with test beam data and provide an attempt to explain the detector properties. The data-taking conditions such as temperature and potential detector inhomogeneities affect energy density measurements but have a small impact on detector efficiency. △ Less

Submitted 21 March, 2023; v1 submitted 13 July, 2022; originally announced July 2022.

Comments: Version published in JINST

Report number: CALICE-PUB-2022-02

Journal ref: 2023 JINST 18 P03035

Energy reconstruction of hadronic showers at the CERN PS and SPS using the Semi-Digital Hadronic Calorimeter

Authors: I. Laktineh, B. Liu, D. Boumediene, Y. W. Baek, D-W. Kim, S. C. Lee, B. G. Min, S. W. Park, Y. Deguchi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, L. Caponetto, C. Combaret, G. Garillot, G. Grenier, J-C. Ianigro, T. Kurca, I. Laktineh, B. Liu, B. Li, N. Lumb , et al. (53 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm… ▽ More The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm $\times$ 1~cm pickup pads combined to a multi-threshold electronics. The prototype was exposed to hadron beams in both the CERN PS and the SPS beamlines in 2015 allowing the test of the SDHCAL in a large energy range from 3~GeV to 80~GeV. After introducing the method used to select the hadrons of our data and reject the muon and electron contamination, we present the energy reconstruction approach that we apply to the data collected from both beamlines and we discuss the response linearity and the energy resolution of the SDHCAL. The results obtained in the two beamlines confirm the excellent SDHCAL performance observed with the data collected with the same prototype in the SPS beamline in 2012. They also show the stability of the SDHCAL in different beam conditions and different time periods. △ Less

Submitted 19 February, 2022; originally announced February 2022.

Comments: 21 pages,23 figures

Report number: CALICE-PUB-2022-001

Measurement of Single Event Effect cross section induced by monoenergetic protons on a 130 nm ASIC

Authors: D. Boumediene, F. Jouve, D. Lambert, R. Madar, S. Manen, O. Perrin, L. Royer, A. Soulier, R. Vandaele

Abstract: Designing integrated circuits in radiation environments such as the High Luminosity LHC (HL-LHC) is challenging. Integrated circuits will be exposed to radiation-induced Single Event Effects (SEE). In deep sub-micron technology devices, the impact of SEEs can be mitigated by triple modular redundancy. The triplication of the most sensitive data is used to recover most of the data corruption induce… ▽ More Designing integrated circuits in radiation environments such as the High Luminosity LHC (HL-LHC) is challenging. Integrated circuits will be exposed to radiation-induced Single Event Effects (SEE). In deep sub-micron technology devices, the impact of SEEs can be mitigated by triple modular redundancy. The triplication of the most sensitive data is used to recover most of the data corruption induced by interacting particles. One type of SEE, called single event upset (SEU), is studied in this paper. The SEU cross-section and the performance of the triplication are estimated using an ASIC prototype exposed to a beam of protons. The SEU cross-section is measured, and a systematic difference between $1\rightarrow{0}$ and $0\rightarrow{1}$ bit flip rates is observed. The efficiency of the mitigation method is investigated. △ Less

Submitted 9 January, 2022; v1 submitted 10 December, 2021; originally announced December 2021.

Comments: Submitted to JINST. Minor changes, typos corrected

Particle Identification Using Boosted Decision Trees in the Semi-Digital Hadronic Calorimeter Prototype

Authors: D. Boumediene, A. Pingault, M. Tytgat, B. Bilki, D. Northacker, Y. Onel, G. Cho, D-W. Kim, S. C. Lee, W. Park, S. Vallecorsa, Y. Deguchi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, L. Caponetto, C. Combaret, R. Ete G. Garillot, G. Grenier, J-C. Ianigro, T. Kurca, I. Laktineh , et al. (65 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines… ▽ More The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines between 2012 and 2018. We present here a new method of particle identification within the SDHCAL using the Boosted Decision Trees (BDT) method applied to the data collected in 2015. The performance of the method is tested first with Geant4-based simulated events and then on the data collected by the SDHCAL in the energy range between 10 and 80~GeV with 10~GeV energy steps. The BDT method is then used to reject the electrons and muons that contaminate the SPS hadron beams. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Report number: CALICE-PUB-2020-001

Hadronic Energy Resolution of a Combined High Granularity Scintillator Calorimeter System

Authors: CALICE Collaboration, J. Repond, L. Xia, J. Apostolakis, G. Folger, V. Ivantchenko, A. Ribon, V. Uzhinskiy, D. Boumediene, V. Francais, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, O. Bach, E. Brianne, A. Ebrahimi, K. Gadow, P. Gttlicher, O. Hartbrich F. Krivan, K. Krüger, J. Kvasnicka, S. Lu, C. Neubüser, A. Provenza , et al. (84 additional authors not shown)

Abstract: This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles.… ▽ More This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles. The results of a software compensation technique based on weighting according to hit energy are compared to those of a standard linear energy reconstruction. The results are compared to predictions of the GEANT4 physics lists QGSP_BERT_HP and FTFP_BERT_HP. △ Less

Submitted 12 September, 2018; v1 submitted 11 September, 2018; originally announced September 2018.

Comments: 31 pages, 41 figures

Resistive Plate Chamber Digitization in a Hadronic Shower Environment

Authors: Z. Deng, Y. Li, Y. Wang, Q. Yue, Z. Yang, J. Apostolakis, G. Folger, C. Grefe, V. Ivantchenko, A. Ribon, V. Uzhinskiy, D. Boumediene, C. Carloganu, V. Français, G. Cho, D-W. Kim, S. C. Lee, W. Park, S. Vallecorsa, S. Cauwenbergh, M. Tytgat, A. Pingault, N. Zaganidis, E. Brianne, A. Ebrahimi , et al. (103 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, e… ▽ More The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated. △ Less

Submitted 15 April, 2016; originally announced April 2016.

First results of the CALICE SDHCAL technological prototype

Authors: V. Buridon, C. Combaret, L. Caponetto, R. Eté, G. Garillot, G. Grenier, R. Han, J. C. Ianigro, R. Kieffer, I. Laktineh, N. Lumb, H. Mathez, L. Mirabito, A. Petrukhin, A. Steen, J. Berenguer Antequera, E. Calvo Alamillo, M. -C. Fouz, J. Marin, J. Puerta-Pelayo, A. Verdugo, E. Cortina Gil, S. Mannai, S. Cauwenbergh, M. Tytgat , et al. (96 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDH… ▽ More The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDHCAL during the test beam was found to be very satisfactory with an efficiency exceeding 90% for almost all of the 48 active layers. A linear response (within 5%) and a good energy resolution are obtained for a large range of hadronic energies (5-80GeV) by applying appropriate calibration coefficients to the collected data for both the Digital (Binary) and the Semi-Digital (Multi-threshold) modes of the SDHCAL prototype. The Semi-Digital mode shows better performance at energies exceeding 30GeV △ Less

Submitted 20 March, 2016; v1 submitted 6 February, 2016; originally announced February 2016.

Design and Electronics Commissioning of the Physics Prototype of a Si-W Electromagnetic Calorimeter for the International Linear Collider

Authors: CALICE Collaboration, J. Repond, J. Yu, C. M. Hawkes, Y. Mikami, O. Miller, N. K. Watson, J. A. Wilson, G. Mavromanolakis, M. A. Thomson, D. R. Ward, W. Yan, F. Badaud, D. Boumediene, C. Carloganu, R. Cornat, P. Gay, Ph. Gris, S. Manen, F. Morisseau, L. Royer, G. C. Blazey, D. Chakraborty, A. Dyshkant, K. Francis , et al. (92 additional authors not shown)

Abstract: The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting… ▽ More The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting of thirty sensitive layers. Each layer has an active area of 18x18 cm2 and a pad size of 1x1 cm2. The absorber thickness totals 24 radiation lengths. It has been exposed in 2006 and 2007 to electron and hadron beams at the DESY and CERN beam test facilities, using a wide range of beam energies and incidence angles. In this paper, the prototype and the data acquisition chain are described and a summary of the data taken in the 2006 beam tests is presented. The methods used to subtract the pedestals and calibrate the detector are detailed. The signal-over-noise ratio has been measured at 7.63 +/- 0.01. Some electronics features have been observed; these lead to coherent noise and crosstalk between pads, and also crosstalk between sensitive and passive areas. The performance achieved in terms of uniformity and stability is presented. △ Less

Submitted 5 August, 2008; v1 submitted 29 May, 2008; originally announced May 2008.

Comments: Content modified: minor review corrections implemented

Journal ref: JINST 3:P08001,2008