-
Non-equilibrium wall model for large eddy simulations of complex flows exhibiting turbulent smooth body separation
Authors:
Rahul Agrawal,
Sanjeeb T. Bose,
Parviz Moin
Abstract:
In this work, a non-equilibrium wall model is proposed for the prediction of turbulent flows experiencing adverse pressure gradients, including separated flow regimes. The mean-flow nonequilibrium is identified by comparing two characteristic velocities: the friction velocity (u_tau) and the viscous-pressure gradient velocity (up). In regions where the pressure gradient velocity is comparable to t…
▽ More
In this work, a non-equilibrium wall model is proposed for the prediction of turbulent flows experiencing adverse pressure gradients, including separated flow regimes. The mean-flow nonequilibrium is identified by comparing two characteristic velocities: the friction velocity (u_tau) and the viscous-pressure gradient velocity (up). In regions where the pressure gradient velocity is comparable to the friction velocity (up \sim u_tau, the near-wall turbulent closure is modified to include the effect of the pressure-gradient and convective terms. The performance of this wall model is evaluated in two canonical flows experiencing smooth body separation: the NASA-Boeing speed bump and the Bachalo-Johnson bump. Improvements in the predictive capabilities of the proposed model for the conventional equilibrium wall model are theorized and then demonstrated through numerical experiments. In particular, the proposed wall model can capture the onset of boundary layer separation observed in experiments or DNS calculations at resolutions where the equilibrium wall model fails to separate.
△ Less
Submitted 16 July, 2024;
originally announced July 2024.
-
Studies of Transonic Aircraft Flows and Prediction of Initial Buffet Onset Using Large-Eddy Simulations
Authors:
Konrad A. Goc,
Rahul Agrawal,
Sanjeeb T. Bose,
Parviz Moin
Abstract:
This article utilizes the Large-Eddy Simulation (LES) paradigm with a physics-based turbulence modeling approach, including a dynamic subgrid-scale model and an equilibrium wall model, to examine the flow over the NASA transonic Common Research Model (CRM), a flow configuration that has been the focus of several AIAA Drag PredictionWorkshops (DPWs). The current work explores sensitivities to lamin…
▽ More
This article utilizes the Large-Eddy Simulation (LES) paradigm with a physics-based turbulence modeling approach, including a dynamic subgrid-scale model and an equilibrium wall model, to examine the flow over the NASA transonic Common Research Model (CRM), a flow configuration that has been the focus of several AIAA Drag PredictionWorkshops (DPWs). The current work explores sensitivities to laminar-to-turbulent transition, wind tunnel mounting system, grid resolution, and grid topology and suggests current best practices in the context of large-eddy simulations of transonic aircraft flows. It is found that promoting the flow transition to turbulence via an array of cylindrical trip dots, including the sting mounting system in the simulations, and leveraging stranded boundary layer grids all tend to improve the quality of the LES solutions. Non-monotonic grid convergence in the LES calculations is observed to be strongly sensitive to grid topology, and stranded meshes rectify this issue relative to their hexagonal close-packed (HCP) counterparts. The details of the boundary layer profiles both at the leading edge of the wing and within the shock-induced separation bubble are studied, with thicknesses and integral measures reported, providing details about the boundary layer characteristics to turbulence modelers not typically available from complex aircraft flows. Finally, an assessment of the initial buffet prediction capabilities of LES is made in the context of a simpler NACA 0012 flow, with computational predictions showing reasonable agreement with available experimental data for the angle of attack at initial buffet onset and shock oscillation frequency associated with sustained buffet.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
A novel internship program in HEP
Authors:
Santanu Banerjee,
Tulika Bose,
Ulrich Heintz,
Sudhir Malik
Abstract:
The U.S. CMS collaboration has designed a novel internship program for undergraduates to enhance the participation of students from under-represented populations, including those at minority serving institutions, in High Energy Physics (HEP). These students traditionally face several barriers including lack of research infrastructure and opportunities, insufficient mentoring, lack of support netwo…
▽ More
The U.S. CMS collaboration has designed a novel internship program for undergraduates to enhance the participation of students from under-represented populations, including those at minority serving institutions, in High Energy Physics (HEP). These students traditionally face several barriers including lack of research infrastructure and opportunities, insufficient mentoring, lack of support networks, and financial hardship, among many others, resulting in a lack of participation in STEM fields. We had recently reported about a fully virtual 10-week internship pilot program called "U.S. CMS - PURSUE (Program for Undergraduate Research SUmmer Experience)" to address dismantling such barriers. The 2023 iteration of this program builds on it by imparting not only an in-person summer internship experience but extends it into the academic semester as well. Students are selected predominantly from Minority Serving Institutions with no research program in HEP and from under-represented groups. They experience a structured hands-on research experience with an initial two-week "bootcamp" on software training modules followed by an 8-week HEP project targeting physics analysis, software, computing or instrumentation work on the CMS Experiment. A subset of interns continue the experience into the academic semester, enabling a further in-depth knowledge of the field and a motivation to persist in STEM areas. In this paper, we describe our recent experience with this upgraded internship program. The paper is dedicated to the memory of Prof. Meenakshi Narain (Brown University) who was the driving force behind this internship program and U.S CMS diversity, equity and inclusion efforts.
△ Less
Submitted 1 February, 2024; v1 submitted 1 January, 2024;
originally announced January 2024.
-
An extension of Thwaites method for turbulent boundary layers
Authors:
Rahul Agrawal,
Sanjeeb T. Bose,
Kevin P. Griffin,
Parviz Moin
Abstract:
Thwaites (1949) developed an approximate method for determining the evolution of laminar boundary layers. The approximation follows from an assumption that the growth of a laminar boundary layer in the presence of pressure gradients could be parameterized solely as a function of a flow parameter, $m = θ^2/ν\frac{dU_e}{ds}$, thus reducing the von Karman momentum integral to a first-order ordinary d…
▽ More
Thwaites (1949) developed an approximate method for determining the evolution of laminar boundary layers. The approximation follows from an assumption that the growth of a laminar boundary layer in the presence of pressure gradients could be parameterized solely as a function of a flow parameter, $m = θ^2/ν\frac{dU_e}{ds}$, thus reducing the von Karman momentum integral to a first-order ordinary differential equation. This method is useful for the analysis of laminar flows, and in computational potential flow solvers to account for the viscous effects. However, for turbulent flows, a similar approximation for turbulent boundary layers subjected to pressure gradients does not yet exist. In this work, an approximate method for determining the momentum thickness of a two-dimensional, turbulent boundary layer is proposed. It is shown that the method provides good estimates of the momentum thickness, when compared to available high-fidelity simulation data, for multiple boundary layers including both favorable and adverse pressure gradient effects, up to the point of separation. In the limit of high Reynolds numbers, it is possible to derive a criterion for the onset of separation from the proposed model which is shown to be in agreement with prior empirical observations (Alber, \textit{$9^{th}$ Aerospace Sciences Meeting, 1971}). The sensitivity of the separation location with respect to upstream perturbations is also analyzed through this model for the NASA/Boeing speed bump and the transonic Bachalo-Johnson bump
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Large-eddy simulations of the NACA23012 airfoil with laser-scanned ice shapes
Authors:
Brett Bornhoft,
Suhas S. Jain,
Konrad Goc,
Sanjeeb T. Bose,
Parviz Moin
Abstract:
In this study, five ice shapes generated at NASA Glenn's Icing Research Tunnel (IRT) are simulated at multiple angles of attack (Broeren et al., J. of Aircraft, 2018). These geometries target different icing environments, both early-time and longer-duration glaze and rime ice exposure events, including a geometry that results from using a thermal ice-protection system. Using the laser-scanned geom…
▽ More
In this study, five ice shapes generated at NASA Glenn's Icing Research Tunnel (IRT) are simulated at multiple angles of attack (Broeren et al., J. of Aircraft, 2018). These geometries target different icing environments, both early-time and longer-duration glaze and rime ice exposure events, including a geometry that results from using a thermal ice-protection system. Using the laser-scanned geometries, detailed representations of the three-dimensional ice geometries are resolved on the grid and simulated using wall-modeled LES. Integrated loads (lift, drag, and moment coefficients) and pressure distributions are compared against experimental measurements in both clean and iced conditions for several angles of attack in both pre-and post-stall regions. The relevant comparisons to the experimental results show that qualitative and acceptable quantitative agreement with the data is observed across all geometries.
Glaze ice formations exhibit larger and highly nonuniform ice features, such as `horns', in contrast to rime ice formations characterized by smaller, uniformly distributed roughness elements. In wall-modeled LES, it was observed that larger roughness scales in the glaze ice that trigger transition can be accurately resolved. Therefore, it is possible for WMLES to accurately capture the aerodynamics of glaze ice shapes without the need for additional modeling. In contrast, rime ice geometries required additional resolution to accurately represent the aerodynamic loads. This study demonstrates the effectiveness of the wall-modeled LES technique in simulating the complex aerodynamic effects of iced airfoils, providing valuable insights for aircraft design in icing environments and highlighting the importance of accurately representing ice geometries and roughness scales in simulations.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
U.S. CMS - PURSUE (Program for Undergraduate Research SUmmer Experience)
Authors:
Tulika Bose,
Sudhir Malik,
Meenakshi Narain
Abstract:
Students from under-represented populations, including those at minority serving institutions have traditionally faced many barriers that have resulted in their being under-represented in High Energy Physics. These barriers include lack of research infrastructure and opportunities, insufficient mentoring, lack of support networks, and financial hardship, among many others. Recently the U.S. CMS Co…
▽ More
Students from under-represented populations, including those at minority serving institutions have traditionally faced many barriers that have resulted in their being under-represented in High Energy Physics. These barriers include lack of research infrastructure and opportunities, insufficient mentoring, lack of support networks, and financial hardship, among many others. Recently the U.S. CMS Collaboration launched a pilot program U.S. CMS - PURSUE (Program for Undergraduate Research SUmmer Experience) to address these barriers. A 10-week paid internship program, the very first of its kind in an HEP experiment, was organised during the summer of 2022. Students were selected predominantly from Minority Serving Institutions with no research program in HEP. This pilot program provided a structured hands-on research experience under the mentor-ship of U.S. CMS scientists from several collaborating institutions. In addition to emphasis on hands-on research, the program offered a set of software training modules for the first few weeks. These were interleaved with a series of lectures every week covering a broad range of topics. The students were exposed to cutting-edge particle physics research and developed a broad set of skills in software, computing, data science, and machine learning. The modality of this program was virtual, due to the unknown circumstances following the pandemic. There is plan to continue the internship program annually, with in-person training and research participation. In this paper, we describe the experience with the pilot program U.S. CMS - PURSUE.
△ Less
Submitted 26 October, 2022; v1 submitted 16 September, 2022;
originally announced September 2022.
-
Non-Boussinesq subgrid-scale model with dynamic tensorial coefficients
Authors:
Rahul Agrawal,
Michael P. Whitmore,
Kevin P. Griffin,
Sanjeeb T. Bose,
Parviz Moin
Abstract:
A major drawback of Boussinesq-type subgrid-scale stress models used in large-eddy simulations is the inherent assumption of alignment between large-scale strain rates and filtered subgrid-stresses. A priori analyses using direct numerical simulation (DNS) data has shown that this assumption is invalid locally as subgrid-scale stresses are poorly correlated with the large-scale strain rates [Bardi…
▽ More
A major drawback of Boussinesq-type subgrid-scale stress models used in large-eddy simulations is the inherent assumption of alignment between large-scale strain rates and filtered subgrid-stresses. A priori analyses using direct numerical simulation (DNS) data has shown that this assumption is invalid locally as subgrid-scale stresses are poorly correlated with the large-scale strain rates [Bardina et al., AIAA 1980; Meneveau and Liu, Ann. Rev. Fluid Mech. 2002]. In the present work, a new, non-Boussinesq subgrid-scale model is presented where the model coefficients are computed dynamically. Some previous non-Boussinesq models have observed issues in providing adequate dissipation of turbulent kinetic energy [e.g.: Bardina et al., AIAA 1980; Clark et al. J. Fluid Mech., 1979; Stolz and Adams, Phys. of Fluids, 1999]; however, the present model is shown to provide sufficient dissipation using dynamic coefficients. Modeled subgrid-scale Reynolds stresses satisfy the consistency requirements of the governing equations for LES, vanish in laminar flow and at solid boundaries, and have the correct asymptotic behavior in the near-wall region of a turbulent boundary layer.
The new model, referred to as the dynamic tensor-coefficient Smagorinsky model (DTCSM), has been tested in simulations of canonical flows: decaying and forced homogeneous isotropic turbulence (HIT), and wall-modeled turbulent channel flow at high Reynolds numbers; the results show favorable agreement with DNS data. In order to assess the performance of DTCSM in more complex flows, wall-modeled simulations of high Reynolds number flow over a Gaussian bump exhibiting smooth-body flow separation are performed. Predictions of surface pressure and skin friction, compared against DNS and experimental data, show improved accuracy from DTCSM in comparison to the existing static coefficient (Vreman) and dynamic Smagorinsky model.
△ Less
Submitted 3 May, 2022; v1 submitted 11 February, 2022;
originally announced February 2022.
-
Performance of wall-modeled LES with boundary-layer-conforming grids for external aerodynamics
Authors:
Adrián Lozano-Durán,
Sanjeeb T. Bose,
Parviz Moin
Abstract:
We investigate the error scaling and computational cost of wall-modeled large-eddy simulation (WMLES) for external aerodynamic applications. The NASA Juncture Flow is used as representative of an aircraft with trailing-edge smooth-body separation. Two gridding strategies are examined: i) constant-size grid, in which the near-wall grid size has a constant value and ii) boundary-layer-conforming gri…
▽ More
We investigate the error scaling and computational cost of wall-modeled large-eddy simulation (WMLES) for external aerodynamic applications. The NASA Juncture Flow is used as representative of an aircraft with trailing-edge smooth-body separation. Two gridding strategies are examined: i) constant-size grid, in which the near-wall grid size has a constant value and ii) boundary-layer-conforming grid (BL-conforming grid), in which the grid size varies to accommodate the growth of the boundary-layer thickness. Our results are accompanied by a theoretical analysis of the cost and expected error scaling for the mean pressure coefficient ($C_p$) and mean velocity profiles. The prediction of $C_p$ is within less than $5\%$ error for all the grids studied, even when the boundary layers are marginally resolved. The high accuracy in the prediction of $C_p$ is attributed to the outer-layer nature of the mean pressure in attached flows. The errors in the predicted mean velocity profiles exhibit a large variability depending on the location considered, namely, fuselage, wing-body juncture, or separated trailing-edge. WMLES performs as expected in regions where the flow resembles a zero-pressure-gradient turbulent boundary layer such as the fuselage ($<5\%$ error). However, there is a decline in accuracy of WMLES predictions of mean velocities in the vicinity of wing-body junctions and, more acutely, in separated zones. The impact of the propagation of errors from the underresolved wing leading-edge is also investigated. It is shown that BL-conforming grids enable a higher accuracy in wing-body junctions and separated regions due to the more effective distribution of grid points, which in turn diminishes the streamwise propagation of errors.
△ Less
Submitted 3 July, 2021;
originally announced July 2021.
-
Learning from the Pandemic: the Future of Meetings in HEP and Beyond
Authors:
Mark S. Neubauer,
Todd Adams,
Jennifer Adelman-McCarthy,
Gabriele Benelli,
Tulika Bose,
David Britton,
Pat Burchat,
Joel Butler,
Timothy A. Cartwright,
Tomáš Davídek,
Jacques Dumarchez,
Peter Elmer,
Matthew Feickert,
Ben Galewsky,
Mandeep Gill,
Maciej Gladki,
Aman Goel,
Jonathan E. Guyer,
Bo Jayatilaka,
Brendan Kiburg,
Benjamin Krikler,
David Lange,
Claire Lee,
Nick Manganelli,
Giovanni Marchiori
, et al. (14 additional authors not shown)
Abstract:
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding…
▽ More
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding virtual meetings, workshops, and conferences. A great deal of experimentation and innovation to explore how to execute these meetings effectively has occurred. Therefore, it is an appropriate time to take stock of what we as a community learned from running virtual meetings and discuss possible strategies for the future. Continuing to develop effective strategies for meetings with a virtual component is likely to be important for reducing the carbon footprint of our research activities, while also enabling greater diversity and inclusion for participation. This report summarizes a virtual two-day workshop on Virtual Meetings held May 5-6, 2021 which brought together experts from both inside and outside of high-energy physics to share their experiences and practices with organizing and executing virtual workshops, and to develop possible strategies for future meetings as we begin to emerge from the COVID-19 pandemic. This report outlines some of the practices and tools that have worked well which we hope will serve as a valuable resource for future virtual meeting organizers in all scientific fields.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Performance of wall-modeled LES for external aerodynamics in the NASA Juncture Flow
Authors:
Adrián Lozano-Durán,
Sanjeeb T. Bose,
Parviz Moin
Abstract:
We investigate the performance of wall-modeled LES for external aerodynamics in the NASA Juncture Flow. We characterize the errors in the prediction of mean velocity profiles and pressure coefficient for three different locations over the aircraft: the upstream region of the fuselage, the wing-body juncture, and the wing-body juncture close to the trailing-edge. The last two locations are characte…
▽ More
We investigate the performance of wall-modeled LES for external aerodynamics in the NASA Juncture Flow. We characterize the errors in the prediction of mean velocity profiles and pressure coefficient for three different locations over the aircraft: the upstream region of the fuselage, the wing-body juncture, and the wing-body juncture close to the trailing-edge. The last two locations are characterized by strong mean-flow three-dimensionality and separation. The message conveyed by our error analysis is that WMLES performs as expected in regions where the flow resembles a zero-pressure-gradient flat plate boundary layer. However, there is a clear decline of the current models in the presence of wing-body junctions and, more acutely, in separated zones. The slow convergence to the solution in these regions renders the brute-force grid-refinement approach to improve the accuracy of the solution unfeasible. The results reported above pertain to the mean velocity profile predicted using the typical grid resolution for external aerodynamics applications, i.e., 5--20 points per boundary-layer thickness. The prediction of the pressure coefficient is below 5\% error for all grid sizes considered, even when boundary layers were marginally resolved. The latter accuracy can be attributed to the outer-layer nature of the mean pressure, which becomes less sensitive to flow details within the turbulent boundary layer. Finally, we show that boundary-layer-conforming grids (i.e., grids maintaining a constant number of points per boundary-layer thickness) allow for a more efficient distribution of grid points and smaller errors. Our results suggest that novel modeling venues encompassing physical insights, together with numerical and gridding advancements, must be exploited to attain predictions within the tolerance required for Certification by Analysis.
△ Less
Submitted 1 January, 2021;
originally announced January 2021.
-
Shock-induced heating and transition to turbulence in a hypersonic boundary layer
Authors:
Lin Fu,
Michael Karp,
Sanjeeb T. Bose,
Parviz Moin,
Javier Urzay
Abstract:
The interaction between an incident shock wave and a Mach-6 undisturbed hypersonic laminar boundary layer over a cold wall is addressed using direct numerical simulations (DNS) and wall-modeled large-eddy simulations (WMLES) at different angles of incidence. At sufficiently high shock-incidence angles, the boundary layer transitions to turbulence via breakdown of near-wall streaks shortly downstre…
▽ More
The interaction between an incident shock wave and a Mach-6 undisturbed hypersonic laminar boundary layer over a cold wall is addressed using direct numerical simulations (DNS) and wall-modeled large-eddy simulations (WMLES) at different angles of incidence. At sufficiently high shock-incidence angles, the boundary layer transitions to turbulence via breakdown of near-wall streaks shortly downstream of the shock impingement, without the need of any inflow free-stream disturbances. The transition causes a localized significant increase in the Stanton number and skin-friction coefficient, with high incidence angles augmenting the peak thermomechanical loads in an approximately linear way. Statistical analyses of the boundary layer downstream of the interaction for each case are provided that quantify streamwise spatial variations of the Reynolds analogy factors and indicate a breakdown of the Morkovin's hypothesis near the wall, where velocity and temperature become correlated. A modified strong Reynolds analogy with a fixed turbulent Prandtl number is observed to perform best. Conventional transformations fail at collapsing the mean velocity profiles on the incompressible log law. The WMLES prompts transition and peak heating, delays separation, and advances reattachment, thereby shortening the separation bubble. When the shock leads to transition, WMLES provides predictions of DNS peak thermomechanical loads within $\pm 10\%$ at a computational cost lower than DNS by two orders of magnitude. Downstream of the interaction, in the turbulent boundary layer, WMLES agrees well with DNS results for the Reynolds analogy factor, the mean profiles of velocity and temperature, including the temperature peak, and the temperature/velocity correlation.
△ Less
Submitted 20 October, 2020;
originally announced October 2020.
-
New Technologies for Discovery
Authors:
Z. Ahmed,
A. Apresyan,
M. Artuso,
P. Barry,
E. Bielejec,
F. Blaszczyk,
T. Bose,
D. Braga,
S. A. Charlebois,
A. Chatterjee,
A. Chavarria,
H. -M. Cho,
S. Dalla Torre,
M. Demarteau,
D. Denisov,
M. Diefenthaler,
A. Dragone,
F. Fahim,
C. Gee,
S. Habib,
G. Haller,
J. Hogan,
B. J. P. Jones,
M. Garcia-Sciveres,
G. Giacomini
, et al. (58 additional authors not shown)
Abstract:
For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by hi…
▽ More
For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by high energy physics have never been more compelling, there is acute awareness of the challenging budgetary and technical constraints when scaling current technologies. Furthermore, many technologies are reaching their sensitivity limit and new approaches need to be developed to overcome the currently irreducible technological challenges. This situation is unfolding against a backdrop of declining funding for instrumentation, both at the national laboratories and in particular at the universities. This trend has to be reversed for the country to continue to play a leadership role in particle physics, especially in this most promising era of imminent new discoveries that could finally break the hugely successful, but limited, Standard Model of fundamental particle interactions. In this challenging environment it is essential that the community invest anew in instrumentation and optimize the use of the available resources to develop new innovative, cost-effective instrumentation, as this is our best hope to successfully accomplish the mission of high energy physics. This report summarizes the current status of instrumentation for high energy physics, the challenges and needs of future experiments and indicates high priority research areas.
△ Less
Submitted 10 August, 2019; v1 submitted 31 July, 2019;
originally announced August 2019.
-
Dynamic slip wall model for large-eddy simulation
Authors:
H. Jane Bae,
Adrián Lozano-Durán,
Sanjeeb T. Bose,
Parviz Moin
Abstract:
Wall modelling in large-eddy simulation (LES) is necessary to overcome the prohibitive near-wall resolution requirements in high-Reynolds-number turbulent flows. Most existing wall models rely on assumptions about the state of the boundary layer and require a priori prescription of tunable coefficients. They also impose the predicted wall stress by replacing the no-slip boundary condition at the w…
▽ More
Wall modelling in large-eddy simulation (LES) is necessary to overcome the prohibitive near-wall resolution requirements in high-Reynolds-number turbulent flows. Most existing wall models rely on assumptions about the state of the boundary layer and require a priori prescription of tunable coefficients. They also impose the predicted wall stress by replacing the no-slip boundary condition at the wall with a Neumann boundary condition in the wall-parallel directions while maintaining the no-transpiration condition in the wall-normal direction. In the present study, we first motivate and analyse the Robin (slip) boundary condition with transpiration (nonzero wall-normal velocity) in the context of wall-modelled LES. The effect of the slip boundary condition on the one-point statistics of the flow is investigated in LES of turbulent channel flow and flat-plate turbulent boundary layer. It is shown that the slip condition provides a framework to compensate for the deficit or excess of mean momentum at the wall. Moreover, the resulting nonzero stress at the wall alleviates the well-known problem of the wall-stress under-estimation by current subgrid-scale (SGS) models. Secondly, we discuss the requirements for the slip condition to be used in conjunction with wall models and derive the equation that connects the slip boundary condition with the stress at the wall. Finally, a dynamic procedure for the slip coefficients is formulated, providing a dynamic slip wall model free of a priori specified coefficients. The performance of the proposed dynamic wall model is tested in a series of LES of turbulent channel flow, non-equilibrium three-dimensional channel flow, and flat-plate turbulent boundary layer. The results show that the dynamic wall model is able to accurately predict one-point turbulence statistics for various flow configurations, Reynolds numbers, and grid resolutions.
△ Less
Submitted 9 October, 2018;
originally announced October 2018.
-
Monte Carlo Simulations of Novel Biaxial Ordering in Systems of Uniaxially Interacting Rod-like Ellipsoids
Authors:
Tushar Kanti Bose
Abstract:
The minimal ingredient to generate a biaxial liquid crystalline ordering is usually considered to be the strongly biaxial interactions breaking the cylindrical symmetry of the uniaxial molecules. Although there is no fundamental reason to forbid a biaxial ordering of pure uniaxial origin, it has been a long standing problem to find a robust demonstration of such phenomenon in systems of rod-like p…
▽ More
The minimal ingredient to generate a biaxial liquid crystalline ordering is usually considered to be the strongly biaxial interactions breaking the cylindrical symmetry of the uniaxial molecules. Although there is no fundamental reason to forbid a biaxial ordering of pure uniaxial origin, it has been a long standing problem to find a robust demonstration of such phenomenon in systems of rod-like particles. We report here off-lattice Monte Carlo simulations of some new model systems of polar achiral rodlike ellipsoids which spontaneously exhibit novel biaxial smectic phases of pure uniaxial origin. We show that dipolar interactions can generate different biaxial phases of pure uniaxial origin in systems of cylindrically symmetric Gay-Berne ellipsoids for an wide variety of length-to-width ratios. The systems of ellipsoids with low length-to-width ratios exhibit highly tilted biaxial smectic phases in the presence of central axial dipoles. In case of ellipsoids having high length-to-width ratio, the generation of a biaxial phase requires the presence of two parallel axial terminal dipoles. In addition, the phases also exhibit fascinating ferroelectric or striped ordering of the dipolar ellipsoids.
△ Less
Submitted 25 March, 2018;
originally announced March 2018.
-
Model of the best-of-N nest-site selection process in honeybees
Authors:
Andreagiovanni Reina,
James A. R. Marshall,
Vito Trianni,
Thomas Bose
Abstract:
The ability of a honeybee swarm to select the best nest site plays a fundamental role in determining the future colony's fitness. To date, the nest-site selection process has mostly been modelled and theoretically analysed for the case of binary decisions. However, when the number of alternative nests is larger than two, the decision process dynamics qualitatively change. In this work, we extend p…
▽ More
The ability of a honeybee swarm to select the best nest site plays a fundamental role in determining the future colony's fitness. To date, the nest-site selection process has mostly been modelled and theoretically analysed for the case of binary decisions. However, when the number of alternative nests is larger than two, the decision process dynamics qualitatively change. In this work, we extend previous analyses of a value-sensitive decision-making mechanism to a decision process among N nests. First, we present the decision-making dynamics in the symmetric case of N equal-quality nests. Then, we generalise our findings to a best-of-N decision scenario with one superior nest and N-1 inferior nests, previously studied empirically in bees and ants. Whereas previous binary models highlighted the crucial role of inhibitory stop-signalling, the key parameter in our new analysis is the relative time invested by swarm members in individual discovery and in signalling behaviours. Our new analysis reveals conflicting pressures on this ratio in symmetric and best-of-N decisions, which could be solved through a time-dependent signalling strategy. Additionally, our analysis suggests how ecological factors determining the density of suitable nest sites may have led to selective pressures for an optimal stable signalling ratio.
△ Less
Submitted 5 June, 2017; v1 submitted 22 November, 2016;
originally announced November 2016.
-
Ferroelectric domain formation in discotic liquid crystals : Monte Carlo study on the influence of boundary conditions
Authors:
Tushar Kanti Bose,
Jayashree Saha
Abstract:
The realization of a spontaneous macroscopic ferroelectric order in fluids of anisotropic mesogens is a topic of both fundamental and technological interest. Recently, we demonstrated that a system of dipolar achiral disklike ellipsoids can exhibit long-searched ferroelectric liquid crystalline phases of dipolar origin. In the present work, extensive off-lattice Monte Carlo simulations are used to…
▽ More
The realization of a spontaneous macroscopic ferroelectric order in fluids of anisotropic mesogens is a topic of both fundamental and technological interest. Recently, we demonstrated that a system of dipolar achiral disklike ellipsoids can exhibit long-searched ferroelectric liquid crystalline phases of dipolar origin. In the present work, extensive off-lattice Monte Carlo simulations are used to investigate the phase behavior of the system under the influences of the electrostatic boundary conditions that restrict any global polarization. We find that the system develops strongly ferroelectric slablike domains periodically arranged in an antiferroelectric fashion. Exploring the phase behavior at different dipole strengths, we find existence of the ferroelectric nematic and ferroelectric columnar order inside the domains. For higher dipole strengths, a biaxial phase is also obtained with a similar periodic array of ferroelectric slabs of antiparallel polarizations. We have studied the depolarizing effects by using both the Ewald summation and the spherical cut-off techniques. We present and compare the results of the two different approaches of considering the depolarizing effects in this anisotropic system. It is explicitly shown that the domain size increases with the system size as a result of considering longer range of dipolar interactions. The system exhibits pronounced system size effects for stronger dipolar interactions. The results provide strong evidence to the novel understanding that the dipolar interactions are indeed sufficient to produce long range ferroelectric order in anisotropic fluids.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
The Origin of Tilted Phase Generation in Systems of Ellipsoidal Molecules with Dipolar Interactions
Authors:
Tushar Kanti Bose,
Jayashree Saha
Abstract:
We report Monte-Carlo simulation studies of some systems consisting of polar rod-like molecules interacting via a pair potential that exhibit liquid crystal phases, attributed with tilt angles of large magnitude. For theoretical understanding of the microscopic origin of the tilted phases, different systems consisting of prolate ellipsoidal molecules of three different lengths, embedded with two s…
▽ More
We report Monte-Carlo simulation studies of some systems consisting of polar rod-like molecules interacting via a pair potential that exhibit liquid crystal phases, attributed with tilt angles of large magnitude. For theoretical understanding of the microscopic origin of the tilted phases, different systems consisting of prolate ellipsoidal molecules of three different lengths, embedded with two symmetrically placed anti-parallel terminal dipoles are considered. We find that the presence of a stable tilted phase crucially depends on the molecular elongation which effectively makes dipolar separation longer. We observe that in case of mesogens with transverse dipoles the tilt in the layered smectic phase gradually increases from zero to a large magnitude as we increase the molecular length. However tilt remains weak with molecular elongation for systems with longitudinal dipoles which shows a small tilt at shorter lengths. This is the first work determining the combined contribution of dipolar separation and orientations in generating biaxial liquid crystal phases with large tilt angles.
△ Less
Submitted 9 April, 2012;
originally announced April 2012.
-
Noise-assisted tumor-immune cells interaction
Authors:
Thomas Bose,
Steffen Trimper
Abstract:
We consider a three-state model comprising tumor cells, effector cells and tumor detecting cells under the influence of noises. It is demonstrated that inevitable stochastic forces existing in all three cell species are able to suppress tumor cell growth completely. Whereas the deterministic model does not reveal a stable tumor-free state, the auto-correlated noise combined with cross-correlation…
▽ More
We consider a three-state model comprising tumor cells, effector cells and tumor detecting cells under the influence of noises. It is demonstrated that inevitable stochastic forces existing in all three cell species are able to suppress tumor cell growth completely. Whereas the deterministic model does not reveal a stable tumor-free state, the auto-correlated noise combined with cross-correlation functions can either lead to tumor dormant states, tumor progression as well as to an elimination of tumor cells. The auto-correlation function exhibits a finite correlation time $τ$ while the cross-correlation functions shows a white noise behavior. The evolution of each of the three kinds of cells leads to a multiplicative noise coupling. The model is investigated by means of a multivariate Fokker-Planck equation for small $τ$. The different behavior of the system is above all determined by the variation of the correlation time and the strength of the cross-correlation between tumor and tumor detecting cells. The theoretical model is based on a biological background discussed in detail and the results are tested using realistic parameters from experimental observations.
△ Less
Submitted 4 July, 2011;
originally announced July 2011.
-
Commissioning of the CMS High Level Trigger
Authors:
Lorenzo Agostino,
Gerry Bauer,
Barbara Beccati,
Ulf Behrens,
Jeffrey Berryhil,
Kurt Biery,
Tulika Bose,
Angela Brett,
James Branson,
Eric Cano,
Harry Cheung,
Marek Ciganek,
Sergio Cittolin,
Jose Antonio Coarasa,
Bryan Dahmes,
Christian Deldicque,
Elizabeth Dusinberre,
Samim Erhan,
Dominique Gigi,
Frank Glege,
Robert Gomez-Reino,
Johannes Gutleber,
Derek Hatton,
Jean-Francois Laurens,
Constantin Loizides
, et al. (25 additional authors not shown)
Abstract:
The CMS experiment will collect data from the proton-proton collisions delivered by the Large Hadron Collider (LHC) at a centre-of-mass energy up to 14 TeV. The CMS trigger system is designed to cope with unprecedented luminosities and LHC bunch-crossing rates up to 40 MHz. The unique CMS trigger architecture only employs two trigger levels. The Level-1 trigger is implemented using custom electr…
▽ More
The CMS experiment will collect data from the proton-proton collisions delivered by the Large Hadron Collider (LHC) at a centre-of-mass energy up to 14 TeV. The CMS trigger system is designed to cope with unprecedented luminosities and LHC bunch-crossing rates up to 40 MHz. The unique CMS trigger architecture only employs two trigger levels. The Level-1 trigger is implemented using custom electronics, while the High Level Trigger (HLT) is based on software algorithms running on a large cluster of commercial processors, the Event Filter Farm. We present the major functionalities of the CMS High Level Trigger system as of the starting of LHC beams operations in September 2008. The validation of the HLT system in the online environment with Monte Carlo simulated data and its commissioning during cosmic rays data taking campaigns are discussed in detail. We conclude with the description of the HLT operations with the first circulating LHC beams before the incident occurred the 19th September 2008.
△ Less
Submitted 7 August, 2009;
originally announced August 2009.
-
The D0 Run II Impact Parameter Trigger
Authors:
T. Adams,
Q. An,
K. M. Black,
T. Bose,
N. J. Buchanan,
S. Caron,
D. K. Cho,
S. Choi,
A. Das,
M. Das,
H. Dong,
W. Earle,
H. Evans,
S. N. Fatakia,
L. Feligioni,
T. Fitzpatrick,
E. Hazen,
U. Heintz,
K. Herner,
J. D. Hobbs,
D. Khatidze,
W. M. Lee,
S. L. Linn,
M. Narain,
C. Pancake
, et al. (18 additional authors not shown)
Abstract:
Many physics topics to be studied by the D0 experiment during Run II of the Fermilab Tevatron ppbar collider give rise to final states containing b--flavored particles. Examples include Higgs searches, top quark production and decay studies, and full reconstruction of B decays. The sensitivity to such modes has been significantly enhanced by the installation of a silicon based vertex detector as…
▽ More
Many physics topics to be studied by the D0 experiment during Run II of the Fermilab Tevatron ppbar collider give rise to final states containing b--flavored particles. Examples include Higgs searches, top quark production and decay studies, and full reconstruction of B decays. The sensitivity to such modes has been significantly enhanced by the installation of a silicon based vertex detector as part of the DO detector upgrade for Run II. Interesting events must be identified initially in 100-200 microseconds to be available for later study. This paper describes custom electronics used in the DO trigger system to provide the real--time identification of events having tracks consistent with the decay of b--flavored particles.
△ Less
Submitted 17 January, 2007;
originally announced January 2007.
