-
Flow induced intermittent transport shapes colloid filtration in complex media
Authors:
Filippo Miele,
Ankur Deep Bordoloi,
Marco Dentz,
Herve Tabuteau,
Veronica L. Morales,
Pietro de Anna
Abstract:
The macroscopic phenomenon of filtration is the separation between suspended and liquid phases and it takes place in natural environments (e.g. groundwater, soil, hyporheic zone) and industrial systems (e.g. filtration plants, pharmaceutical industry, hospital care). Porous materials represent excellent filters since they are characterized by a large solid surface to which flowing particles can at…
▽ More
The macroscopic phenomenon of filtration is the separation between suspended and liquid phases and it takes place in natural environments (e.g. groundwater, soil, hyporheic zone) and industrial systems (e.g. filtration plants, pharmaceutical industry, hospital care). Porous materials represent excellent filters since they are characterized by a large solid surface to which flowing particles can attach and be retained. Colloidal filtration by porous media is governed by a complex interplay between transport dynamics through intricate pore structures and surface-mediated retention. Yet, classical approaches fail to capture key properties (such as filter spatial heterogeneity) and experimental observations--e.g. non-exponential deposition profiles. A key limitation of such approaches lies in the assumption that particle attachment to solid surfaces occurs at a constant rate over a given length scale, neglecting the intrinsic heterogeneity of the medium, i.e. pore size variability. Here, we develop a multiscale microfluidic model system to directly observe colloidal transport and deposition over more than three orders of magnitude in length--from tens of microns to a meter--within a porous architecture with controlled heterogeneity. By tracking individual colloidal particles within the pores, we reveal intermittent dynamics along each trajectory: particles alternate between long-range "flights" through pore channels and short-range localized "dives" near grain surfaces. During the dives, attachment can occur at a constant rate, but the distributed flight sizes, during which attachment cannot occur, produce anomalous filtration. This is quantified by deposition profiles and breakthrough curves. A stochastic model based on a continuous time random walk (CTRW), constrained by experimental data, captures this behavior and links pore structure with macroscopic filtration.
△ Less
Submitted 5 May, 2025;
originally announced May 2025.
-
Interstitial flow potentiates TGF-$β$/Smad-signaling activity in lung cancer spheroids in a 3D-microfluidic chip
Authors:
Zaid Rahman,
Ankur Deep Bordoloi,
Haifa Rouhana,
Margherita Tavasso,
Valeria Garbin,
Peter ten Dijke,
Pouyan E. Boukany
Abstract:
Within the tumor microenvironment (TME), cancer cells use mechanotransduction pathways to convert biophysical forces to biochemical signals. However, the underlying mechanisms and functional significance of these pathways remain largely unclear. The upregulation of mechanosensitive pathways from biophysical forces such as interstitial flow, leads to the activation of various cytokines, most import…
▽ More
Within the tumor microenvironment (TME), cancer cells use mechanotransduction pathways to convert biophysical forces to biochemical signals. However, the underlying mechanisms and functional significance of these pathways remain largely unclear. The upregulation of mechanosensitive pathways from biophysical forces such as interstitial flow, leads to the activation of various cytokines, most importantly transforming growth factor-$β$ (TGF-$β$). TGF-$β$ is a critical inducer of epithelial-mesenchymal transition (EMT) in cancer cells that leads to increased cell motility and invasion in a Smad dependent manner. Current research models have limited ability to investigate the combined effects of biophysical forces (such as interstitial flow) and cytokines (TGF-$β$) in a 3D microenvironment. We used a 3D-matrix based microfluidic platform to demonstrate the potentiating effect of interstitial flow (IF) on exogenous TGF-$β$ induced upregulation of the Smad-signaling activity and the expression of mesenchymal marker vimentin in A549 lung cancer spheroids. To monitor this, we used stably integrated fluorescent based reporters into the A549 cancer cell genome. Our results demonstrate that interstitial flow enhances exogenous TGF-$β$ induced Smad-signaling activity in lung cancer spheroids embedded in a matrix microenvironment. In addition, we observed an increased cell motility for A549 spheroids when exposed to interstitial flow and TGF-$β$. Our 3D-microfluidic model integrated with real-time imaging provides a powerful tool for investigating cancer cell signaling and motility associated with invasion characteristics in a physiologically relevant TME.
△ Less
Submitted 23 November, 2023; v1 submitted 11 May, 2023;
originally announced May 2023.
-
Structure induced vortices control anomalous dispersion in porous media
Authors:
Ankur Deep Bordoloi,
David Scheidweiler,
Marco Dentz,
Mohammed Bouabdellaoui,
Marco Abbarchi,
Pietro de Anna
Abstract:
Natural porous systems, such as soil, membranes, and biological tissues comprise disordered structures characterized by dead-end pores connected to a network of percolating channels. The release and dispersion of particles, solutes, and microorganisms from such features is key for a broad range of environmental and medical applications including soil remediation, drug delivery and filtration. Yet,…
▽ More
Natural porous systems, such as soil, membranes, and biological tissues comprise disordered structures characterized by dead-end pores connected to a network of percolating channels. The release and dispersion of particles, solutes, and microorganisms from such features is key for a broad range of environmental and medical applications including soil remediation, drug delivery and filtration. Yet, the role of microscopic structure and flow for the dispersion of particles and solutes in such disordered systems has been only poorly understood, in part due to the stagnant and opaque nature of these microscopic systems. Here, we use a microfluidic model system that features a pore structure characterized by dead-ends to determine how particles are transported, retained and dispersed. We observe strong tailing of arrival time distributions at the outlet of the medium characterized by power-law decay with an exponent of 2/3. Using numerical simulations and an analytical model, we link this behavior to particles initially located within dead-end pores, and explain the tailing exponent with a hopping and rolling mechanism along the streamlines inside vortices within dead-end pores. These dynamics are quantified by a stochastic model that predicts the full evolution of arrival times. Our results demonstrate how microscopic flow structures can impact macroscopic particle transport.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
Spinning and tumbling of long fibers in isotropic turbulence
Authors:
Theresa B. Oehmke,
Ankur D. Bordoloi,
Evan Variano,
Gautier Verhille
Abstract:
We simultaneously measure both spinning and tumbling components of rotation for long near-neutrally buoyant fibers in homogeneous and isotropic turbulence. The lengths and diameters of the measured fibers extend to several orders of the Kolmogorov length of the surrounding turbulent flow. Our measurements show that the variance of the spinning rate follows a -4/3 power law scaling with the fiber d…
▽ More
We simultaneously measure both spinning and tumbling components of rotation for long near-neutrally buoyant fibers in homogeneous and isotropic turbulence. The lengths and diameters of the measured fibers extend to several orders of the Kolmogorov length of the surrounding turbulent flow. Our measurements show that the variance of the spinning rate follows a -4/3 power law scaling with the fiber diameter ($d$) and is always larger than the variance of the tumbling rate. This behavior surprisingly resembles that observed previously for sub-Kolmogorov fibers. The general picture that emerges from this study is that long fibers preferentially align with vortex filaments that can be as long as the integral length of turbulence. We compute the Lagrangian time scale and the distribution of both tumbling and spinning that supports this outlook. Our measurements also allow us to quantify the importance of the Coriolis term on the rotational dynamics of fibers in turbulent flows.
△ Less
Submitted 19 November, 2020; v1 submitted 17 November, 2020;
originally announced November 2020.
-
Lagrangian time scale of rotation for inertial fibers in isotropic turbulence
Authors:
Ankur D. Bordoloi,
Gautier Verhille,
Evan Variano
Abstract:
Using time-resolved measurements of the orientation of rigid inertial fibers in a turbulence-tank, we investigate the autocorrelation of their tumbling rate. The correlation time ($τ_d$) is well predicted by Kolmogorov inertial-range scaling based on the fiber length (L) when the fiber inertia can be neglected. For inertial fibers, we propose a simple model considering fiber inertia (measured by a…
▽ More
Using time-resolved measurements of the orientation of rigid inertial fibers in a turbulence-tank, we investigate the autocorrelation of their tumbling rate. The correlation time ($τ_d$) is well predicted by Kolmogorov inertial-range scaling based on the fiber length (L) when the fiber inertia can be neglected. For inertial fibers, we propose a simple model considering fiber inertia (measured by a tumbling Stokes number) and a viscous torque which accurately predicts both the correlation time and the variance of the tumbling rate.
△ Less
Submitted 5 October, 2019;
originally announced October 2019.
-
Turbulence statistics in a negatively buoyant multiphase plume
Authors:
Ankur D. Bordoloi,
Chris C. K. Lai,
Laura K. Clark,
Gerardo Veliz,
Evan Variano
Abstract:
We investigate the turbulence statistics in a {multiphase plume made of heavy particles (particle Reynolds number at terminal velocity is 450)}. Using refractive-index-matched stereoscopic particle image velocimetry, we measure the locations of particles {whose buoyancy drives the formation of a multiphase plume,} {together with the local velocity of the induced flow in the ambient salt-water}. {M…
▽ More
We investigate the turbulence statistics in a {multiphase plume made of heavy particles (particle Reynolds number at terminal velocity is 450)}. Using refractive-index-matched stereoscopic particle image velocimetry, we measure the locations of particles {whose buoyancy drives the formation of a multiphase plume,} {together with the local velocity of the induced flow in the ambient salt-water}. {Measurements in the plume centerplane exhibit self-similarity in mean flow characteristics consistent with classic integral plume theories.} The turbulence characteristics resemble those measured in a bubble plume, {including strong anisotropy in the normal Reynolds stresses. However, we observe structural differences between the two multiphase plumes. First, the skewness of the probability density function (PDF) of the axial velocity fluctuations is not that which would be predicted by simply reversing the direction of a bubble plume. Second, in contrast to a bubble plume, the particle plume has a non-negligible fluid-shear production term in the turbulent kinetic energy (TKE) budget. Third, the radial decay of all measured terms in the TKE budget is slower than those in a bubble plume.} Despite these dissimilarities, a bigger picture emerges that applies to both flows. The TKE production by particles (or bubbles) roughly balances the viscous dissipation, except near the plume centerline. The one-dimensional power-spectra of the velocity fluctuations show a -3 power-law that puts both the particle and bubble plume in a category different from single-phase shear-flow turbulence.
△ Less
Submitted 18 July, 2019;
originally announced July 2019.
-
Local velocity variations for a drop moving through an orifice: effects of edge geometry and surface wettability
Authors:
Ankur D. Bordoloi,
Ellen K. Longmire
Abstract:
We investigate velocity variations inside of and surrounding a gravity driven drop impacting on and moving through a confining orifice, wherein the effects of edge geometry (round- vs. sharp-edged) and surface wettability (hydrophobic vs. hydrophilic) of the orifice are considered. Using refractive index matching and time-resolved PIV, we quantify the redistribution of energy in the drop and the s…
▽ More
We investigate velocity variations inside of and surrounding a gravity driven drop impacting on and moving through a confining orifice, wherein the effects of edge geometry (round- vs. sharp-edged) and surface wettability (hydrophobic vs. hydrophilic) of the orifice are considered. Using refractive index matching and time-resolved PIV, we quantify the redistribution of energy in the drop and the surrounding fluid during the drop's impact and motion through a round-edged orifice. The measurements show the importance of a) drop kinetic energy transferred to and dissipated within the surrounding liquid, and b) the drop kinetic energy due to internal deformation and rotation during impact and passage through the orifice. While a rounded orifice edge prevents contact between the drop and orifice surface, a sharp edge promotes contact immediately upon impact, changing the near surface flow field as well as the drop passage dynamics. For a sharp-edged hydrophobic orifice, the contact lines remain localized near the orifice edge, but slipping and pinning strongly affect the drop propagation and outcome. For a sharp-edged hydrophilic orifice, on the other hand, the contact lines propagate away from the orifice edge, and their motion is coupled with the global velocity fields in the drop and the surrounding fluid. By examining the contact line propagation over a hydrophilic orifice surface with minimal drop penetration, we characterize two stages of drop spreading that exhibit power-law dependence with variable exponent. In the first stage, the contact line propagates under the influence of impact inertia and gravity. In the second stage, inertial influence subsides, and the contact line propagates mainly due to wettability.
△ Less
Submitted 18 April, 2018;
originally announced April 2018.
