-
Atomic-optical interferometry in fractured loops: a general solution for Rydberg radio frequency receivers
Authors:
Bartosz Kasza,
Sebastian Borówka,
Wojciech Wasilewski,
Michał Parniak
Abstract:
The development of novel radio frequency atomic receivers brings attention to the theoretical description of atom-light interactions in sophisticated, multilevel schemes. Of special interest, are the schemes where several interaction paths interfere with each other, bringing about the phase-sensitive measurement of detected radio fields. In the theoretical modeling of those cases, the common assum…
▽ More
The development of novel radio frequency atomic receivers brings attention to the theoretical description of atom-light interactions in sophisticated, multilevel schemes. Of special interest, are the schemes where several interaction paths interfere with each other, bringing about the phase-sensitive measurement of detected radio fields. In the theoretical modeling of those cases, the common assumptions are often insufficient to determine the boundary detection parameters, such as receiving bandwidth or saturation point, critical for practical considerations of atomic sensing technology. This evokes the resurfacing of a long-standing problem on how to describe an atom-light interaction in a fractured loop. In such a case, the quantum steady state is not achieved even with constant, continuous interactions. Here we propose a method for modeling of such a system, basing our approach on the Fourier expansion of a non-equilibrium steady state. The proposed solution is both numerically effective and able to predict edge cases, such as saturation. Furthermore, as an example, we employ this method to provide a complete description of a Rydberg superheterodyne receiver, obtaining the boundary parameters describing the operation of this atomic detector.
△ Less
Submitted 11 December, 2024; v1 submitted 10 December, 2024;
originally announced December 2024.
-
A Rydberg atom based system for benchmarking mmWave automotive radar chips
Authors:
Sebastian Borówka,
Wiktor Krokosz,
Mateusz Mazelanik,
Wojciech Wasilewski,
Michał Parniak
Abstract:
Rydberg atomic sensors and receivers have enabled sensitive and traceable measurements of RF fields at a wide range of frequencies. Here we demonstrate the detection of electric field amplitude in the extremely high frequency (EHF) band, at $131\ \mathrm{GHz}$. In our approach we propagate the EHF field in a beam, with control over its direction and polarization at the detector using photonic wave…
▽ More
Rydberg atomic sensors and receivers have enabled sensitive and traceable measurements of RF fields at a wide range of frequencies. Here we demonstrate the detection of electric field amplitude in the extremely high frequency (EHF) band, at $131\ \mathrm{GHz}$. In our approach we propagate the EHF field in a beam, with control over its direction and polarization at the detector using photonic waveplates. This way, we take advantage of the highest detection sensitivity, registered for collinear propagation and circular polarization. To exhibit the potential for applications in this kind of Rydberg-atom based detection, we perform test measurements on the EHF field emitted from an on-chip radar, planned to be used in automotive industry as a vital sign detector. Our work elucidates practical applications of Rydberg-atom media as well as photonic metamaterial elements.
△ Less
Submitted 1 October, 2024; v1 submitted 6 June, 2024;
originally announced June 2024.
-
Optically-biased Rydberg microwave receiver enabled by hybrid nonlinear interferometry
Authors:
Sebastian Borówka,
Mateusz Mazelanik,
Wojciech Wasilewski,
Michał Parniak
Abstract:
The coupling of Rydberg vapors medium both to microwave and optical fields allows harnessing the merits of all-optical detection, e.g. weak disruption of the measured field and invulnerability to extremely strong fields, owing to the lack of conventional RF antenna in the detector. The trouble with this approach arises, as the greatest sensitivity is exhibited with the use of additional microwave…
▽ More
The coupling of Rydberg vapors medium both to microwave and optical fields allows harnessing the merits of all-optical detection, e.g. weak disruption of the measured field and invulnerability to extremely strong fields, owing to the lack of conventional RF antenna in the detector. The trouble with this approach arises, as the greatest sensitivity is exhibited with the use of additional microwave field acting as a local oscillator, and the measurement can no longer be all-optical. Here we propose a different solution, optical-bias detection, that allows truly all-optical operation, while retaining exceptional sensitivity. We tackle the issue of laser phase noise, emerging in this type of detection, via a simultaneous measurement of the phase spectrum in a nonlinear process and real-time data processing, which overall yields an improvement of $35\ \mathrm{dB}$ in terms of signal-to-noise ratio compared with the basic approach. We report the sensitivity of $176\ \mathrm{nV/cm/\sqrt{Hz}}$ and reliable operation up to $3.5\ \mathrm{mV/cm}$ of $13.9\ \mathrm{GHz}$ electric field. This approach is directly comparable to the state of the art superheterodyne, while retaining the merits of all-optical detection.
△ Less
Submitted 29 March, 2025; v1 submitted 8 March, 2024;
originally announced March 2024.
-
Continuous wideband microwave-to-optical converter based on room-temperature Rydberg atoms
Authors:
Sebastian Borówka,
Uliana Pylypenko,
Mateusz Mazelanik,
Michał Parniak
Abstract:
The coupling of microwave and optical systems presents an immense challenge due to the natural incompatibility of energies, but potential applications range from optical interconnects for quantum computers to next-generation quantum microwave sensors, detectors or coherent imagers. Several engineered platforms have emerged that are constrained by specific conditions, such as cryogenic environments…
▽ More
The coupling of microwave and optical systems presents an immense challenge due to the natural incompatibility of energies, but potential applications range from optical interconnects for quantum computers to next-generation quantum microwave sensors, detectors or coherent imagers. Several engineered platforms have emerged that are constrained by specific conditions, such as cryogenic environments, impulse protocols, or narrowband fields. Here we employ Rydberg atoms that allow for the natural wideband coupling of optical and microwave photons even at room temperature and with the use of a modest setup. We present continuous-wave conversion of a $13.9\ \mathrm{GHz}$ field to a near-infrared optical signal using an ensemble of Rydberg atoms via a free-space six-wave mixing process, designed to minimize noise interference from any nearby frequencies. The Rydberg photonic converter exhibits an unprecedented conversion dynamic range of $57\ \mathrm{dB}$ and a wide conversion bandwidth of $16\ \mathrm{MHz}$. Using photon counting, we demonstrate the readout of photons of free-space $300\ \mathrm{K}$ thermal background radiation at $1.59\ \mathrm{nV}\mathrm{cm}^{-1}(\mathrm{rad}/\mathrm{s})^{-1/2}$ ($3.98 \ \mathrm{nV}\mathrm{cm}^{-1}\mathrm{Hz}^{-1/2}$) with the sensitivity down to $3.8\ \mathrm{K}$ of noise-equivalent temperature, allowing us to observe Hanbury Brown and Twiss interference of microwave photons.
△ Less
Submitted 11 October, 2023; v1 submitted 16 February, 2023;
originally announced February 2023.
-
Sensitivity of Rydberg-atom receiver to frequency and amplitude modulation of microwaves
Authors:
Sebastian Borówka,
Uliana Pylypenko,
Mateusz Mazelanik,
Michał Parniak
Abstract:
Electromagnetically induced transparency (EIT) in atomic systems involving Rydberg states is known to be a sensitive probe of incident microwave (MW) fields, in particular those resonant with Rydberg-to-Rydberg transitions. Here we propose an intelligible analytical model of Rydberg atomic receiver's response to amplitude- (AM) and frequency-modulated (FM) signals, and compare it with experimental…
▽ More
Electromagnetically induced transparency (EIT) in atomic systems involving Rydberg states is known to be a sensitive probe of incident microwave (MW) fields, in particular those resonant with Rydberg-to-Rydberg transitions. Here we propose an intelligible analytical model of Rydberg atomic receiver's response to amplitude- (AM) and frequency-modulated (FM) signals, and compare it with experimental results: we present a setup that allows sending signals with either AM or FM and evaluating their efficiency with demodulation. Additionally, the setup reveals a new detection configuration, using all circular polarizations for optical fields and allowing detection of circularly polarized MW field, propagating colinearly with optical beams. In our measurements we systematically present that several parameters exhibit local optimum characteristics and then estimate these optimal parameters and working ranges, addressing the need to devise a robust Rydberg MW sensor and its operational protocol.
△ Less
Submitted 14 September, 2022; v1 submitted 23 June, 2022;
originally announced June 2022.
