-
Surface Tension and Energy Conservation in a Moving Fluid
Authors:
Tomas Bohr,
Bernhard Scheichl
Abstract:
The transport of energy in a moving fluid with a simply connected free surface is analyzed, taking into account the contribution of surface tension. This is done by following a "control volume" with arbitrary, specified velocity, independent of the flow velocity, and determining the rates of energy passing through the boundaries, as well as the energy dissipation in the bulk. In particular, a simp…
▽ More
The transport of energy in a moving fluid with a simply connected free surface is analyzed, taking into account the contribution of surface tension. This is done by following a "control volume" with arbitrary, specified velocity, independent of the flow velocity, and determining the rates of energy passing through the boundaries, as well as the energy dissipation in the bulk. In particular, a simple conservation equation for the surface area is written down, which clearly shows the contribution of the Laplace pressure at the free surface and the tangential surface tension forces at its boundary. It emerges as the mechanical conservation law for the surface energy in its general form. For a static control volume, all contributions from surface tension disappear, except that the pressure has to be modified by the Laplace contribution.
△ Less
Submitted 4 December, 2020; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Surface tension and the origin of the circular hydraulic jump in a thin liquid film
Authors:
Alexis Duchesne,
Anders Andersen,
Tomas Bohr
Abstract:
It was recently claimed by Bhagat et al. (J. Fluid Mech. vol. 851 (2018), R5) that the scientific literature on the circular hydraulic jump in a thin liquid film is flawed by improper treatment and severe underestimation of the influence of surface tension. Bhagat {\em et al.} use an energy equation with a new surface energy term that is introduced without reference, and they conclude that the loc…
▽ More
It was recently claimed by Bhagat et al. (J. Fluid Mech. vol. 851 (2018), R5) that the scientific literature on the circular hydraulic jump in a thin liquid film is flawed by improper treatment and severe underestimation of the influence of surface tension. Bhagat {\em et al.} use an energy equation with a new surface energy term that is introduced without reference, and they conclude that the location of the hydraulic jump is determined by surface tension alone. We show that this approach is incorrect and derive a corrected energy equation. Proper treatment of surface tension in thin film flows is of general interest beyond hydraulic jumps, and we show that the effect of surface tension is fully contained in the Laplace pressure due to the curvature of the surface. Following the same approach as Bhagat et al., i.e., keeping only the first derivative of the surface velocity, the influence of surface tension is, for thin films, much smaller than claimed by them. We further describe the influence of viscosity in thin film flows, and we conclude by discussing the distinction between time-dependent and stationary hydraulic jumps.
△ Less
Submitted 6 August, 2019; v1 submitted 27 March, 2019;
originally announced March 2019.
-
Imbibition in plant seeds
Authors:
Jean-François Louf,
Yi Zheng,
Aradhana Kumar,
Tomas Bohr,
Carsten Gundlach,
Jesper Harholt,
Henning Friis Poulsen,
Kaare H. Jensen
Abstract:
We describe imbibition in real and artificial plant seeds, using a combination of experiments and theory. In both systems, our experiments demonstrate that liquid permeates the substrate at a rate which decreases gradually over time. Tomographic imaging of soy seeds is used to confirmed this by observation of the permeating liquid using an iodine stain. To rationalize the experimental data, we pro…
▽ More
We describe imbibition in real and artificial plant seeds, using a combination of experiments and theory. In both systems, our experiments demonstrate that liquid permeates the substrate at a rate which decreases gradually over time. Tomographic imaging of soy seeds is used to confirmed this by observation of the permeating liquid using an iodine stain. To rationalize the experimental data, we propose a model based on capillary action which predicts the temporal evolution of the radius of the wet front and the seed mass. The depth of the wetting front initially evolves as $t^{1/2}$ in accord with the Lucas-Washburn law. At later times, when the sphere is almost completely filled, the front radius scales as $(1-t/t_{\text{max}})^{1/2}$ where $t_{\text{max}}$ is the time required to complete imbibition. The data obtained on both natural and artificial seeds collapse onto a single curve that agrees well with our model, suggesting that capillary phenomena contribute to moisture uptake in soy seeds.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Viscous energy dissipation in slender channels with porous or semipermeable walls
Authors:
Hanna Rademaker,
Kaare Hartvig Jensen,
Tomas Bohr
Abstract:
We study the viscous dissipation in pipe flows in long channels with porous or semipermeable walls, taking into account both the dissipation in the bulk of the channel and in the pores. We give simple closed form expressions for the dissipation in terms of the axially varying flow rate $Q(x)$ and the pressure $p(x)$, generalizing the well known expression $\dot W=Q\,Δp$ for the case of impenetrabl…
▽ More
We study the viscous dissipation in pipe flows in long channels with porous or semipermeable walls, taking into account both the dissipation in the bulk of the channel and in the pores. We give simple closed form expressions for the dissipation in terms of the axially varying flow rate $Q(x)$ and the pressure $p(x)$, generalizing the well known expression $\dot W=Q\,Δp$ for the case of impenetrable walls with constant $Q$ and a pressure difference $Δp$ between the ends of the pipe. When the pressure $p_0$ outside the pipe is constant, the result is the straightforward generalization $\dot W=Δ\left[(p-p_0) \,Q\right]$. Finally, applications to osmotic flows are considered.
△ Less
Submitted 7 December, 2020; v1 submitted 28 October, 2016;
originally announced October 2016.
-
Diffusion and bulk flow in phloem loading - a theoretical analysis of the polymer trap mechanism in plants
Authors:
Julia Dölger,
Hanna Rademaker,
Johannes Liesche,
Alexander Schulz,
Tomas Bohr
Abstract:
Plants create sugar in the mesophyll cells of their leaves by photosynthesis. This sugar, mostly sucrose, has to be loaded via the bundle sheath into the phloem vascular system (the sieve elements), where it is distributed to growing parts of the plant. We analyze the feasibility of a particular loading mechanism, active symplasmic loading, also called the polymer trap mechanism, where sucrose is…
▽ More
Plants create sugar in the mesophyll cells of their leaves by photosynthesis. This sugar, mostly sucrose, has to be loaded via the bundle sheath into the phloem vascular system (the sieve elements), where it is distributed to growing parts of the plant. We analyze the feasibility of a particular loading mechanism, active symplasmic loading, also called the polymer trap mechanism, where sucrose is transformed into heavier sugars, such as raffinose and stachyose, in the intermediary-type companion cells bordering the sieve elements in the minor veins of the phloem. Keeping the heavier sugars from diffusing back requires that the plasmodesmata connecting the bundle sheath with the intermediary cell act as extremely precise filters, which are able to distinguish between molecules that differ by less than 20% in size. In our modeling, we take into account the coupled water and sugar movement across the relevant interfaces, without explicitly considering the chemical reactions transforming the sucrose into the heavier sugars. Based on the available data for plasmodesmata geometry, sugar concentrations and flux rates, we conclude that this mechanism can in principle function. We find that the water flow through the plasmodesmata, which has not been quantified before, contributes only 10-20% to the sucrose flux into the intermediary cells, while the main part is transported by diffusion. On the other hand, the subsequent sugar translocation into the sieve elements would very likely be carried predominantly by bulk water flow through the plasmodesmata. Thus, in contrast to apoplasmic loaders, all the necessary water for phloem translocation would be supplied in this way with no need for additional water uptake across the plasma membranes of the phloem.
△ Less
Submitted 13 October, 2014; v1 submitted 6 June, 2014;
originally announced June 2014.
-
Comment on Y. Couder and E. Fort: "Single-Particle Diffraction and Interference at a Macroscopic Scale", Phys. Rev. Lett. (2006)
Authors:
Anders Andersen,
Jacob Madsen,
Christian Reichelt,
Sonja Rosenlund Ahl,
Benny Lautrup,
Clive Ellegaard,
Mogens T. Levinsen,
Tomas Bohr
Abstract:
In a paper from 2006, Couder and Fort [1] describe a version of the famous double slit experiment performed with drops bouncing on a vibrated fluid surface, where interference in the particle statistics is found even though it is possible to determine unambiguously which slit the "walking" drop passes. It is one of the first papers in an impressive series, showing that such walking drops closely r…
▽ More
In a paper from 2006, Couder and Fort [1] describe a version of the famous double slit experiment performed with drops bouncing on a vibrated fluid surface, where interference in the particle statistics is found even though it is possible to determine unambiguously which slit the "walking" drop passes. It is one of the first papers in an impressive series, showing that such walking drops closely resemble de Broglie waves and can reproduce typical quantum phenomena like tunneling and quantized states [2-13]. The double slit experiment is, however, a more stringent test of quantum mechanics, because it relies upon superposition and phase coherence. In the present comment we first point out that the experimental data presented in [1] are not convincing, and secondly we argue that it is not possible in general to capture quantum mechanical results in a system, where the trajectory of the particle is well-defined.
△ Less
Submitted 4 April, 2014;
originally announced May 2014.
-
Model For Polygonal Hydraulic Jumps
Authors:
Erik A. Martens,
Shinya Watanabe,
Tomas Bohr
Abstract:
We propose a phenomenological model for the polygonal hydraulic jumps discovered by Ellegaard et al., based on the known flow structure for the type II hydraulic jumps with a "roller" (separation eddy) near the free surface in the jump region. The model consists of mass conservation and radial force balance between hydrostatic pressure and viscous stresses on the roller surface. In addition, we co…
▽ More
We propose a phenomenological model for the polygonal hydraulic jumps discovered by Ellegaard et al., based on the known flow structure for the type II hydraulic jumps with a "roller" (separation eddy) near the free surface in the jump region. The model consists of mass conservation and radial force balance between hydrostatic pressure and viscous stresses on the roller surface. In addition, we consider the azimuthal force balance, primarily between pressure and viscosity, but also including non-hydrostatic pressure contributions from surface tension in light of recent observations by Bush et al. The model can be analyzed by linearization around the circular state, resulting in a parameter relationship for nearly circular polygonal states. A truncated, but fully nonlinear version of the model can be solved analytically. This simpler model gives rise to polygonal shapes that are very similar to those observed in experiments, even though surface tension is neglected, and the condition for the existence of a polygon with N corners depends only on a single dimensionless number φ. Finally, we include time-dependent terms in the model and study linear stability of the circular state. Instability occurs for suffciently small Bond number and the most unstable wave length is expected to be roughly proportional to the width of the roller as in the Rayleigh-Plateau instability.
△ Less
Submitted 29 February, 2012; v1 submitted 19 November, 2011;
originally announced November 2011.
-
Osmotically driven flows in microchannels separated by a semipermeable membrane
Authors:
Kaare Hartvig Jensen,
Jinkee Lee,
Tomas Bohr,
Henrik Bruus
Abstract:
We perform experimental investigations of osmotically driven flows in artificial microchannels by studying the dynamics and structure of the front of a sugar solution traveling in 200 um wide and 50-200 um deep microchannels. We find that the sugar front travels with constant speed, and that this speed is proportional to the concentration of the sugar solution and inversely proportional to the d…
▽ More
We perform experimental investigations of osmotically driven flows in artificial microchannels by studying the dynamics and structure of the front of a sugar solution traveling in 200 um wide and 50-200 um deep microchannels. We find that the sugar front travels with constant speed, and that this speed is proportional to the concentration of the sugar solution and inversely proportional to the depth of the channel. We propose a theoretical model, which, in the limit of low axial flow resistance, predicts that the sugar front indeed should travel with a constant velocity. The model also predicts an inverse relationship between the depth of the channel and the speed and a linear relation between the sugar concentration and the speed. We thus find good agreement between the experimental results and the predictions of the model. Our motivation for studying osmotically driven flows is that they are believed to be responsible for the translocation of sugar in plants through the phloem sieve element cells. Also, we suggest that osmotic elements can act as integrated pumps with no movable parts in lab-on-a-chip systems.
△ Less
Submitted 28 October, 2008;
originally announced October 2008.
-
Osmotically driven pipe flows and their relation to sugar transport in plants
Authors:
K. H. Jensen,
E. Rio,
R. Hansen,
C. Clanet,
T. Bohr
Abstract:
In plants, osmotically driven flows are believed to be responsible for translocation of sugar in the pipe-like phloem cell network, spanning the entire length of the plant. In this paper, we present an experimental and theoretical study of transient osmotically driven flows through pipes with semipermeable walls. We extend the experimental work of Eschrich, Evert and Young \cite[]{Eschrich:1972}…
▽ More
In plants, osmotically driven flows are believed to be responsible for translocation of sugar in the pipe-like phloem cell network, spanning the entire length of the plant. In this paper, we present an experimental and theoretical study of transient osmotically driven flows through pipes with semipermeable walls. We extend the experimental work of Eschrich, Evert and Young \cite[]{Eschrich:1972} by providing a more accurate version of their experiment allowing for better comparison with theory. In the experiments we measure the dynamics and structure of a "sugar front", i.e. the transport and decay of a sudden loading of sugar in a pipe which is closed in both ends. We include measurements of pressure inside the membrane tube allowing us to compare the experiments directly with theory and, in particular, to confirm quantitatively the exponential decay of the front in a closed tube.In a novel setup we are able to measure the entire concentration profile as the sugar front moves. In contrast to previous studies we find very good agreement between experiment and theory.
In the limit of low axial resistance (valid in our experiments as well as in many cases in plants) we show that the equations can be solved exactly by the method of characteristics yielding, in general, an implicit solution. Further we show that under more general conditions the equations of motion can be rewritten as a single integro-differential equation, which can be readily solved numerically. The applicability of our results to plants is discussed and it is shown that it is probable that the pressure-flow hypothesis can account for short distance transport of sugar in plants.
△ Less
Submitted 22 October, 2008;
originally announced October 2008.
-
Polygons on a Rotating Fluid Surface
Authors:
Thomas R. N. Jansson,
Martin P. Haspang,
Kaare H. Jensen,
Pascal Hersen,
Tomas Bohr
Abstract:
We report a novel and spectacular instability of a fluid surface in a rotating system. In a flow driven by rotating the bottom plate of a partially filled, stationary cylindrical container, the shape of the free surface can spontaneously break the axial symmetry and assume the form of a polygon rotating rigidly with a speed different from that of the plate. With water we have observed polygons w…
▽ More
We report a novel and spectacular instability of a fluid surface in a rotating system. In a flow driven by rotating the bottom plate of a partially filled, stationary cylindrical container, the shape of the free surface can spontaneously break the axial symmetry and assume the form of a polygon rotating rigidly with a speed different from that of the plate. With water we have observed polygons with up to 6 corners. It has been known for many years that such flows are prone to symmetry breaking, but apparently the polygonal surface shapes have never been observed. The creation of rotating internal waves in a similar setup was observed for much lower rotation rates, where the free surface remains essentially flat. We speculate that the instability is caused by the strong azimuthal shear due to the stationary walls and that it is triggered by minute wobbling of the rotating plate. The slight asymmetry induces a tendency for mode-locking between the plate and the polygon, where the polygon rotates by one corner for each complete rotation of the plate.
△ Less
Submitted 30 November, 2005;
originally announced November 2005.
-
The Shape and Stability of a Viscous Thread
Authors:
Sergey Senchenko,
Tomas Bohr
Abstract:
When a viscous fluid, like oil or syrup, streams from a small orifice and falls freely under gravity, it forms a long slender thread, which can be maintained in a stable, stationary state with lengths up to several meters. We shall discuss the shape of such liquid threads and their surprising stability. It turns out that the strong advection of the falling fluid can almost outrun the Rayleigh-Pl…
▽ More
When a viscous fluid, like oil or syrup, streams from a small orifice and falls freely under gravity, it forms a long slender thread, which can be maintained in a stable, stationary state with lengths up to several meters. We shall discuss the shape of such liquid threads and their surprising stability. It turns out that the strong advection of the falling fluid can almost outrun the Rayleigh-Plateau instability. Even for a very viscous fluid like sirup or silicone oil, the asymptotic shape and stability is independent of viscosity and small perturbations grow with time as $\exp({{\rm C} t^{1/4}})$, where the constant is independent of viscosity. The corresponding spatial growth has the form $\exp({(z/L)^{1/8}})$, where $z$ is the down stream distance and $L \sim Q^2 σ^{-2} g$ and where $σ$ is the surface tension, $g$ is the gravity and $Q$ is the flux. However, the value of viscosity determines the break-up length of a thread $L_ν \sim ν^{1/4}$ and thus the possibility of observing the $\exp({{\rm C} t^{1/4}})$ type asymptotics.
△ Less
Submitted 27 February, 2004;
originally announced February 2004.
-
Integral methods for shallow free-surface flows with separation
Authors:
Shinya Watanabe,
Vachtang Putkaradze,
Tomas Bohr
Abstract:
We study laminar thin film flows with large distortions in the free surface using the method of averaging across the flow. Two concrete problems are studied: the circular hydraulic jump and the flow down an inclined plane. For the circular hydraulic jump our method is able to handle an internal eddy and separated flow. Assuming a variable radial velocity profile like in Karman-Pohlhausen's metho…
▽ More
We study laminar thin film flows with large distortions in the free surface using the method of averaging across the flow. Two concrete problems are studied: the circular hydraulic jump and the flow down an inclined plane. For the circular hydraulic jump our method is able to handle an internal eddy and separated flow. Assuming a variable radial velocity profile like in Karman-Pohlhausen's method, we obtain a system of two ordinary differential equations for stationary states that can smoothly go through the jump where previous studies encountered a singularity. Solutions of the system are in good agreement with experiments. For the flow down an inclined plane we take a similar approach and derive a simple model in which the velocity profile is not restricted to a parabolic or self-similar form. Two types of solutions with large surface distortions are found: solitary, kink-like propagating fronts, obtained when the flow rate is suddenly changed, and stationary jumps, obtained, e.g., behind a sluice gate. We then include time-dependence in the model to study stability of these waves. This allows us to distinguish between sub- and supercritical flows by calculating dispersion relations for wavelengths of the order of the width of the layer.
△ Less
Submitted 24 August, 2000;
originally announced August 2000.
-
Averaging theory for the structure of hydraulic jumps and separation in laminar free-surface flows
Authors:
Tomas Bohr,
Vachtang Putkaradze,
Shinya Watanabe
Abstract:
We present a simple viscous theory of free-surface flows in boundary layers, which can accommodate regions of separated flow. In particular this yields the structure of stationary hydraulic jumps, both in their circular and linear versions, as well as structures moving with a constant speed. Finally we show how the fundamental hydraulic concepts of subcritical and supercritical flow, originating…
▽ More
We present a simple viscous theory of free-surface flows in boundary layers, which can accommodate regions of separated flow. In particular this yields the structure of stationary hydraulic jumps, both in their circular and linear versions, as well as structures moving with a constant speed. Finally we show how the fundamental hydraulic concepts of subcritical and supercritical flow, originating from inviscid theory, emerge at intermediate length scales in our model.
△ Less
Submitted 7 August, 1997;
originally announced August 1997.
