-
RePlaChem: A dimensionality reduction library for plasma chemical mechanisms
Authors:
Z. Nikolaou,
E. Morais,
S. Van Rompaey,
C. Anastassiou,
A. Bogaerts,
V. Vavourakis
Abstract:
In this work, we present RePlaChem, a software library for reducing detailed large-scale plasma chemical mechanisms to smaller skeletal ones. The library parses a plasma chemical mechanism in the well-established format compatible with the software ZDPlasKin, runs the reduction algorithm, and generates automatically a skeletal chemical mechanism. This feature allows the seamless implementation of…
▽ More
In this work, we present RePlaChem, a software library for reducing detailed large-scale plasma chemical mechanisms to smaller skeletal ones. The library parses a plasma chemical mechanism in the well-established format compatible with the software ZDPlasKin, runs the reduction algorithm, and generates automatically a skeletal chemical mechanism. This feature allows the seamless implementation of the skeletal chemistry in well-known solvers including ZDPlasKin. In turn, the reduction of the chemistry accelerates otherwise computationally expensive numerical simulations. Furthermore, RePlaChem can be used as an analysis tool to shed light into the underlying reaction physics by identifying the dominant species and associated reactions. In order to validate and demonstrate its capabilities, RePlaChem is used to substantially reduce a large-scale methane-hydrogen plasma chemical mechanism with 77 species and 4404 reactions at various orders with a relatively small loss of accuracy. GitHub: https: // github. com/ znikolaou/ RePlaChem. git
△ Less
Submitted 6 July, 2025;
originally announced July 2025.
-
In-situ Plasma Studies using a Direct Current Microplasma in a Scanning Electron Microscope
Authors:
Lukas Grünewald,
Dmitry Chezganov,
Robin De Meyer,
Andrey Orekhov,
Sandra Van Aert,
Annemie Bogaerts,
Sara Bals,
Jo Verbeeck
Abstract:
Microplasmas can be used for a wide range of technological applications and to improve our understanding of fundamental physics. Scanning electron microscopy, on the other hand, provides insights into the sample morphology and chemistry of materials from the mm-down to the nm-scale. Combining both would provide direct insight into plasma-sample interactions in real-time and at high spatial resolut…
▽ More
Microplasmas can be used for a wide range of technological applications and to improve our understanding of fundamental physics. Scanning electron microscopy, on the other hand, provides insights into the sample morphology and chemistry of materials from the mm-down to the nm-scale. Combining both would provide direct insight into plasma-sample interactions in real-time and at high spatial resolution. Up till now, very few attempts in this direction have been made, and significant challenges remain. This work presents a stable direct current glow discharge microplasma setup built inside a scanning electron microscope. The experimental setup is capable of real-time in-situ imaging of the sample evolution during plasma operation and it demonstrates localized sputtering and sample oxidation. Further, the experimental parameters such as varying gas mixtures, electrode polarity, and field strength are explored and experimental $V$-$I$ curves under various conditions are provided. These results demonstrate the capabilities of this setup in potential investigations of plasma physics, plasma-surface interactions, and materials science and its practical applications. The presented setup shows the potential to have several technological applications, e.g., to locally modify the sample surface (e.g., local oxidation and ion implantation for nanotechnology applications) on the $μ$m-scale.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Low Temperature Plasma for Biology, Hygiene, and Medicine: Perspective and Roadmap
Authors:
Mounir Laroussi,
Sander Bekeschus,
Michael Keidar,
Annemie Bogaerts,
Alexander Fridman,
XinPei Lu,
Kostya,
Ostrikov,
Masaru Hori,
Katharina Stapelmann,
Vandana Miller,
Stephan Reuter,
Christophe Laux,
Ali Mesbah,
James Walsh,
Chunqi Jiang,
Selma Mededovic Thagard,
Hiromasa Tanaka,
DaWei Liu,
Dayun Yan,
Maksudbek Yusupov
Abstract:
Plasma, the fourth and most pervasive state of matter in the visible universe, is a fascinating medium that is connected to the beginning of our universe itself. Man-made plasmas are at the core of many technological advances that include the fabrication of semiconductor devices, which enabled the modern computer and communication revolutions. The introduction of low temperature, atmospheric press…
▽ More
Plasma, the fourth and most pervasive state of matter in the visible universe, is a fascinating medium that is connected to the beginning of our universe itself. Man-made plasmas are at the core of many technological advances that include the fabrication of semiconductor devices, which enabled the modern computer and communication revolutions. The introduction of low temperature, atmospheric pressure plasmas to the biomedical field has ushered a new revolution in the healthcare arena that promises to introduce plasma-based therapies to combat some thorny and long-standing medical challenges. This paper presents an overview of where research is at today and discusses innovative concepts and approaches to overcome present challenges and take the field to the next level. It is written by a team of experts who took an in-depth look at the various biomedical applications, made critical analysis, and proposed ideas and concepts that should help the research community focus their efforts on clear and practical steps necessary to keep the field advancing for decades to come.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
CO2-CH4 conversion and syngas formation at atmospheric pressure using a multi-electrode dielectric barrier discharge
Authors:
A. Ozkan,
T. Dufour,
G. Arnoult,
P. De Keyzer,
A. Bogaerts,
F. Reniers
Abstract:
The conversion of CO2 and CH4 into value-added chemicals is studied in a new geometry of a dielectric barrier discharge (DBD) with multi-electrodes, dedicated to the treatment of high gas flow rates. Gas chromatography is used to define the CO2 and CH4 conversion as well as the yields of the products of decomposition (CO, O2 and H2) and of recombination (C2H4, C2H6 and CH2O). The influence of thre…
▽ More
The conversion of CO2 and CH4 into value-added chemicals is studied in a new geometry of a dielectric barrier discharge (DBD) with multi-electrodes, dedicated to the treatment of high gas flow rates. Gas chromatography is used to define the CO2 and CH4 conversion as well as the yields of the products of decomposition (CO, O2 and H2) and of recombination (C2H4, C2H6 and CH2O). The influence of three parameters is investigated on the conversion: the CO2 and CH4 flow rates, the plasma power and the nature of the carrier gas (argon or helium). The energy efficiency of the CO2 conversion is estimated and compared with those of similar atmospheric plasma sources. Our DBD reactor shows a good compromise between a good energy efficiency and the treatment of a large CO2 flow rate.
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
QDB: a new database of plasma chemistries and reactions
Authors:
Jonathan Tennyson,
Sara Rahimi,
Christian Hill,
Lisa Tse,
Anuradha Vibhakar,
Dolica Akello-Egwel,
Daniel B. Brown,
Anna Dzarasova,
James R. Hamilton,
Dagmar Jaksch,
Sebastian Mohr,
Keir Wren-Little,
Johannes Bruckmeier,
Ankur Agarwal,
Klaus Bartschat,
Annemie Bogaerts,
Jean-Paul Booth,
Matthew J. Goeckner,
Khaled Hassouni,
Yukikazu Itikawa,
Bastiaan J Braams,
E. Krishnakumar,
Annarita Laricchiuta,
Nigel J. Mason,
Sumeet Pandey
, et al. (9 additional authors not shown)
Abstract:
One of the most challenging and recurring problems when modelling plasmas is the lack of data on key atomic and molecular reactions that drive plasma processes. Even when there are data for some reactions, complete and validated datasets of chemistries are rarely available. This hinders research on plasma processes and curbs development of industrial applications. The QDB project aims to address t…
▽ More
One of the most challenging and recurring problems when modelling plasmas is the lack of data on key atomic and molecular reactions that drive plasma processes. Even when there are data for some reactions, complete and validated datasets of chemistries are rarely available. This hinders research on plasma processes and curbs development of industrial applications. The QDB project aims to address this problem by providing a platform for provision, exchange, and validation of chemistry datasets. A new data model developed for QDB is presented. QDB collates published data on both electron scattering and heavy-particle reactions. These data are formed into reaction sets, which are then validated against experimental data where possible. This process produces both complete chemistry sets and identifies key reactions that are currently unreported in the literature. Gaps in the datasets can be filled using established theoretical methods. Initial validated chemistry sets for SF$_6$/CF$_4$/O$_2$ and SF$_6$/CF$_4$/N$_2$/H$_2$ are presented as examples.
△ Less
Submitted 13 April, 2017;
originally announced April 2017.
-
How do the barrier thickness and dielectric material influence the filamentary mode and CO2 conversion in a flowing DBD?
Authors:
A Ozkan,
Thierry Dufour,
A Bogaerts,
F Reniers
Abstract:
Dielectric barrier discharges (DBDs) are commonly used to generate cold plasmas at atmospheric pressure. Whatever their configuration (tubular or planar), the presence of a dielectric barrier is mandatory to prevent too much charge build up in the plasma and the formation of a thermal arc. In this article, the role of the barrier thickness (2.0, 2.4 and 2.8 mm) and of the kind of dielectric materi…
▽ More
Dielectric barrier discharges (DBDs) are commonly used to generate cold plasmas at atmospheric pressure. Whatever their configuration (tubular or planar), the presence of a dielectric barrier is mandatory to prevent too much charge build up in the plasma and the formation of a thermal arc. In this article, the role of the barrier thickness (2.0, 2.4 and 2.8 mm) and of the kind of dielectric material (alumina, mullite, pyrex, quartz) is investigated on the filamentary behavior in the plasma and on the CO2 conversion in a tubular flowing DBD, by means of mass spectrometry measurements correlated with electrical characterization and IR imaging. Increasing the barrier thickness decreases the capacitance, while preserving the electrical charge. As a result, the voltage over the dielectric increases and a larger number of microdischarges is generated, which enhances the CO2 conversion. Furthermore, changing the dielectric material of the barrier, while keeping the same geometry and dimensions, also affects the CO2 conversion. The highest CO2 conversion and energy efficiency are obtained for quartz and alumina, thus not following the trend of the relative permittivity. From the electrical characterization, we clearly demonstrate that the most important parameters are the somewhat higher effective plasma voltage (yielding a somewhat higher electric field and electron energy in the plasma) for quartz, as well as the higher plasma current (and thus larger electron density) and the larger number of microdischarge filaments (mainly for alumina, but also for quartz). The latter could be correlated to the higher surface roughness for alumina and to the higher voltage over the dielectric for quartz.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
DBD in burst mode: solution for more efficient CO2 conversion?
Authors:
A Ozkan,
Thierry Dufour,
T Silva,
N Britun,
R Snyders,
F Reniers,
A Bogaerts
Abstract:
CO2 conversion into value-added products has gained significant interest over the few last years, as the greenhouse gas concentrations constantly increase due to anthropogenic activities. Here we report on experiments for CO2 conversion by means of a cold atmospheric plasma using a cylindrical flowing dielectric barrier discharge (DBD) reactor. A detailed comparison of this DBD ignited in a so-cal…
▽ More
CO2 conversion into value-added products has gained significant interest over the few last years, as the greenhouse gas concentrations constantly increase due to anthropogenic activities. Here we report on experiments for CO2 conversion by means of a cold atmospheric plasma using a cylindrical flowing dielectric barrier discharge (DBD) reactor. A detailed comparison of this DBD ignited in a so-called burst mode (i.e. where an AC voltage is applied during a limited amount of time) and pure AC mode is carried out to evaluate their effect on the conversion of CO2 as well as on the energy efficiency. Decreasing the duty cycle in the burst mode from 100% (i.e. corresponding to pure AC mode) to 40% leads to a rise in the conversion from 16--26% and to a rise in the energy efficiency from 15 to 23%. Based on a detailed electrical analysis, we show that the conversion correlates with the features of the microfilaments. Moreover, the root-mean-square voltage in the burst mode remains constant as a function of the process time for the duty cycles \textless{}70%, while a higher duty cycle or the usual pure AC mode leads to a clear voltage decay by more than 500 V, over approximately 90 s, before reaching a steady state regime. The higher plasma voltage in the burst mode yields a higher electric field. This causes the increasing the electron energy, and therefore their involvement in the CO2 dissociation process, which is an additional explanation for the higher CO2 conversion and energy efficiency in the burst mode.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
A combined study for turning CO$_2$ and H$_2$O into value-added products in a dielectric barrier discharge
Authors:
Ramses Snoeckx,
Alp Ozkan,
Robby Aerts,
Thierry Dufour,
François Reniers,
Annemie Bogaerts
Abstract:
A combination of experiments and extensive modelling, including a chemical kinetics analysis, was performed for a CO$_2$/H$_2$O plasma in a dielectric barrier discharge. This provides a better understanding of the mechanisms related to the reactivity of the plasma and of the conversions into value-added products, such as methanol.
A combination of experiments and extensive modelling, including a chemical kinetics analysis, was performed for a CO$_2$/H$_2$O plasma in a dielectric barrier discharge. This provides a better understanding of the mechanisms related to the reactivity of the plasma and of the conversions into value-added products, such as methanol.
△ Less
Submitted 2 May, 2016;
originally announced June 2016.
-
Understanding polyethylene surface functionalization by an atmospheric He-O$_2$ plasma through combined experiments and simulation
Authors:
Thierry Dufour,
Johan Minnebo,
Sami Abou Rich,
Erik C. Neyts,
Annemie Bogaerts,
François Reniers
Abstract:
High density polyethylene surfaces were exposed to the atmospheric post-discharge of a radiofrequency plasma torch supplied in helium and oxygen. Dynamic water contact angle measurements were performed to evaluate changes in surface hydrophilicity and angle resolved x-ray photoelectron spectroscopy was carried out to identify the functional groups responsible for wettability changes and to study t…
▽ More
High density polyethylene surfaces were exposed to the atmospheric post-discharge of a radiofrequency plasma torch supplied in helium and oxygen. Dynamic water contact angle measurements were performed to evaluate changes in surface hydrophilicity and angle resolved x-ray photoelectron spectroscopy was carried out to identify the functional groups responsible for wettability changes and to study their subsurface depth profiles, up to 9 nm in depth. The reactions leading to the formation of C-O, C=O and O-C=O groups were simulated by molecular dynamics. These simulations demonstrate that impinging oxygen atoms do not react immediately upon impact but rather remain at or close to the surface before eventually reacting. The simulations also explain the release of gaseous species in the ambient environment as well as the ejection of low molecular weight oxidized materials from the surface.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
CO2 splitting by DBD: understanding the influence of electrical parameters and regimes
Authors:
Alp Ozkan,
Thierry Dufour,
Tiago Silva,
Nikolay Britun,
Rony Snyders,
Annemie Bogaerts,
François Reniers
Abstract:
Plasma processes are an innovative approach for the decomposition of CO2 in O radicals and CO as a valuable carbon source. In this experimental work, a tubular dielectric barrier discharge operating at atmospheric pressure has been used to split CO2 and study its conversion considering the influence of frequency and power, as well as the influence of various electrical regimes (AC, AC pulsed regim…
▽ More
Plasma processes are an innovative approach for the decomposition of CO2 in O radicals and CO as a valuable carbon source. In this experimental work, a tubular dielectric barrier discharge operating at atmospheric pressure has been used to split CO2 and study its conversion considering the influence of frequency and power, as well as the influence of various electrical regimes (AC, AC pulsed regimes). The CO2 conversion has been measured by mass spectrometry and gas chromatography while gas and walls temperatures have been determined and correlated to evaluate their influence of the CO2 splitting.
△ Less
Submitted 29 April, 2016;
originally announced April 2016.
-
The influence of power and frequency on the filamentary behavior of a flowing DBD-application to the splitting of CO2
Authors:
Alp Ozkan,
Thierry Dufour,
Tiago Silva,
Nikolay Britun,
Rony Snyders,
Annemie Bogaerts,
François Reniers
Abstract:
In this experimental study, a flowing dielectric barrier discharge operating at atmospheric pressure is used for the splitting of CO2 into O2 and CO. The influence of the applied frequency and plasma power on the microdischarge properties is investigated to understand their role on the CO2 conversion. Electrical measurements are carried out to explain the conversion trends and to characterize the…
▽ More
In this experimental study, a flowing dielectric barrier discharge operating at atmospheric pressure is used for the splitting of CO2 into O2 and CO. The influence of the applied frequency and plasma power on the microdischarge properties is investigated to understand their role on the CO2 conversion. Electrical measurements are carried out to explain the conversion trends and to characterize the microdischarges through their number, their lifetime, their intensity and the induced electrical charge. Their influence on the gas and electrode temperatures is also evidenced through optical emission spectroscopy and infrared imaging. It is shown that, in our configuration, the conversion depends mostly on the charge delivered in the plasma and not on the effective plasma voltage when the applied power is modified. Similarly, at constant total current, a better conversion is observed at low frequencies, where a less filamentary discharge regime with a higher effective plasma voltage than that at a higher frequency is obtained.
△ Less
Submitted 29 April, 2016;
originally announced April 2016.
-
Modeling of chemical processes in the low pressure capacitive RF discharges in a mixture of Ar/C2H2
Authors:
D. A. Ariskin,
I. V. Schweigert,
A. L. Alexandrov,
A. Bogaerts,
F. M. Peeters
Abstract:
We study the properties of a capacitive 13.56 MHz discharge properties with a mixture of Ar/C2H2 taking into account the plasmochemistry and growth of heavy hydrocarbons. A hybrid model was developed to combine the kinetic description for electron motion and the fluid approach for negative and positive ions transport and plasmochemical processes. A significant change of plasma parameters related…
▽ More
We study the properties of a capacitive 13.56 MHz discharge properties with a mixture of Ar/C2H2 taking into account the plasmochemistry and growth of heavy hydrocarbons. A hybrid model was developed to combine the kinetic description for electron motion and the fluid approach for negative and positive ions transport and plasmochemical processes. A significant change of plasma parameters related to injection of 5.8% portion of acetylene in argon was observed and analyzed. We found that the electronegativity of the mixture is about 30%. The densities of negatively and positively charged heavy hydrocarbons are sufficiently large to be precursors for the formation of nanoparticles in the discharge volume.
△ Less
Submitted 12 September, 2008;
originally announced September 2008.
