Showing 1–8 of 8 results for author: Bland, S N

Plasma flows during the ablation stage of an over-massed pulsed-power-driven exploding planar wire array

Authors: R. Datta, J. Angel, J. B. Greenly, S. N. Bland, J. P. Chittenden, E. S. Lavine, W. M. Potter, D. Robinson, T. W. O. Varnish, E. Wong, D. A. Hammer, B. R. Kusse, J. D. Hare

Abstract: We characterize the plasma flows generated during the ablation stage of an over-massed exploding planar wire array, fielded on the COBRA pulsed-power facility (1 MA peak current, 250 ns rise time). The planar wire array is designed to provide a driving magnetic field (80-100 T) and current per wire distribution (about 60 kA), similar to that in a 10 MA cylindrical exploding wire array fielded on t… ▽ More We characterize the plasma flows generated during the ablation stage of an over-massed exploding planar wire array, fielded on the COBRA pulsed-power facility (1 MA peak current, 250 ns rise time). The planar wire array is designed to provide a driving magnetic field (80-100 T) and current per wire distribution (about 60 kA), similar to that in a 10 MA cylindrical exploding wire array fielded on the Z machine. Over-massing the arrays enables continuous plasma ablation over the duration of the experiment. The requirement to over-mass on the Z machine necessitates wires with diameters of 75-100 $μ$m, which are thicker than wires usually fielded on wire array experiments. To test ablation with thicker wires, we perform a parametric study by varying the initial wire diameter between 33-100 $μ$m. The largest wire diameter (100 $μ$m) array exhibits early closure of the AK gap, while the gap remains open during the duration of the experiment for wire diameters between 33-75 $μ$m. Laser plasma interferometry and time-gated XUV imaging are used to probe the plasma flows ablating from the wires. The plasma flows from the wires converge to generate a pinch, which appears as a fast-moving ($V \approx {100}$ kms$^{-1}$) column of increased plasma density ($\bar{n}_e \approx 2 \times 10^{18}$ cm$^{-3}$) and strong XUV emission. Finally, we compare the results with three-dimensional resistive-magnetohydrodynamic (MHD) simulations performed using the code GORGON, the results of which reproduce the dynamics of the experiment reasonably well. △ Less

Submitted 12 July, 2023; v1 submitted 5 June, 2023; originally announced June 2023.

Comments: 14 pages; 14 figures

Journal ref: Phys. Plasmas 30, 092104 (2023)

Investigating radiatively driven, magnetised plasmas with a university scale pulsed-power generator

Authors: Jack W. D. Halliday, Aidan Crilly, Jeremy Chittenden, Roberto C. Mancini, Stefano Merlini, Steven Rose, Danny R. Russell, Lee G. Suttle, Vicente Valenzuela-Villaseca, Simon N. Bland, Sergey V. Lebedev

Abstract: We present first results from a novel experimental platform which is able to access physics relevant to topics including indirect-drive magnetised ICF; laser energy deposition; various topics in atomic physics; and laboratory astrophysics (for example the penetration of B-fields into HED plasmas). This platform uses the X-Rays from a wire array Z-Pinch to irradiate a silicon target, producing an o… ▽ More We present first results from a novel experimental platform which is able to access physics relevant to topics including indirect-drive magnetised ICF; laser energy deposition; various topics in atomic physics; and laboratory astrophysics (for example the penetration of B-fields into HED plasmas). This platform uses the X-Rays from a wire array Z-Pinch to irradiate a silicon target, producing an outflow of ablated plasma. The ablated plasma expands into ambient, dynamically significant B-fields (~5 T) which are supported by the current flowing through the Z-Pinch. The outflows have a well-defined (quasi-1D) morphology, enabling the study of fundamental processes typically only available in more complex, integrated schemes. Experiments were fielded on the MAGPIE pulsed-power generator (1.4 MA, 240 ns rise time). On this machine a wire array Z-Pinch produces an X-Ray pulse carrying a total energy of ~15 kJ over ~30 ns. This equates to an average brightness temperature of around 10 eV on-target. △ Less

Submitted 22 March, 2022; originally announced March 2022.

A portable X-pinch design for x-ray diagnostics of warm dense matter

Authors: J. Strucka, J. W. D. Halliday, T. Gheorghiu, H. Horton, B. Krawczyk, P. Moloney, S. Parker, G. Rowland, N. Schwartz, S. Stanislaus, S. Theocharous, C. Wilson, Z. Zhao, T. A. Shelkovenko, S. A. Pikuz, S. N. Bland

Abstract: We describe the design and x-ray emission properties (temporal, spatial, and spectral) of Dry Pinch I, a portable X-pinch driver developed at Imperial College London. Dry Pinch I is a direct capacitor discharge device, 300x300x700 mm3 in size and approximately 50 kg in mass, that can be used as an external driver for x-ray diagnostics in high-energy-density physics experiments. Among key findings,… ▽ More We describe the design and x-ray emission properties (temporal, spatial, and spectral) of Dry Pinch I, a portable X-pinch driver developed at Imperial College London. Dry Pinch I is a direct capacitor discharge device, 300x300x700 mm3 in size and approximately 50 kg in mass, that can be used as an external driver for x-ray diagnostics in high-energy-density physics experiments. Among key findings, the device is shown to reliably produce 1.1 +- 0.3 ns long x-ray bursts that couple approximately 50 mJ of energy into photon energies from 1 to 10 keV. The average shot-to-shot jitter of these bursts is found to be 10 +- 4.6 ns using a combination of x-ray and current diagnostics. The spatial extent of the x-ray hot spot from which the radiation emanates agrees with previously published results for X-pinches suggesting a spot size of 10 +- 6 um in the soft energy region (1-10 keV) and 190 +- 100 um in the hard energy region (>10 keV). These characteristics mean that Dry Pinch I is ideally suited for use as a probe in experiments driven in the laboratory or at external facilities when more conventional sources of probing radiation are not available. At the same time, this is also the first detailed investigation of an X-pinch operating reliably at current rise rates of less than 1 kA/ns. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Journal ref: Matter Radiat. Extremes 7, 016901 (2022)

A Time-Resolved Imaging System for the Diagnosis of X-ray Self-Emission in High Energy Density Physics Experiments

Authors: Jack W. D. Halliday, Simon N. Bland, Jack D. Hare, Susan Parker, Lee G. Suttle, Danny R. Russell, Sergey V. Lebedev

Abstract: A diagnostic capable of recording spatially and temporally resolved X-ray self emission data was developed to characterise experiments on the MAGPIE pulsed-power generator. The diagnostic used two separate imaging systems: A pinhole imaging system with two dimensional spatial resolution and a slit imaging system with one dimensional spatial resolution. The two dimensional imaging system imaged lig… ▽ More A diagnostic capable of recording spatially and temporally resolved X-ray self emission data was developed to characterise experiments on the MAGPIE pulsed-power generator. The diagnostic used two separate imaging systems: A pinhole imaging system with two dimensional spatial resolution and a slit imaging system with one dimensional spatial resolution. The two dimensional imaging system imaged light onto image plate. The one dimensional imaging system imaged light onto the same piece of image plate and a linear array of silicon photodiodes. This design allowed the cross-comparison of different images, allowing a picture of the spatial and temporal distribution of X-ray self emission to be established. The design was tested in a series of pulsed-power driven magnetic-reconnection experiments. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Two-Colour Interferometry and Thomson Scattering Measurements of a Plasma Gun

Authors: J. D. Hare, J. MacDonald, S. N. Bland, J. Dranczewski, J. W. D. Halliday, S. V. Lebedev, L. G. Suttle, E. R. Tubman, W. Rozmus

Abstract: We present experimental measurements of a pulsed plasma gun, using two-colour imaging laser interferometry and spatially resolved Thomson scattering. Interferometry measurements give an electron density $n_e\approx2.7\times10^{17}$ cm$^{-3}$ at the centre of the plasma plume, at 5 mm from the plasma gun nozzle. The Thomson scattered light is collected from two probing angles allowed us to simultan… ▽ More We present experimental measurements of a pulsed plasma gun, using two-colour imaging laser interferometry and spatially resolved Thomson scattering. Interferometry measurements give an electron density $n_e\approx2.7\times10^{17}$ cm$^{-3}$ at the centre of the plasma plume, at 5 mm from the plasma gun nozzle. The Thomson scattered light is collected from two probing angles allowed us to simultaneously measure the collective and non-collective spectrum of the electron feature from the same spatial locations. The inferred electron densities from the location of the electron plasma waves is in agreement with interferometry. The electron temperatures inferred from the two spectra are not consistent, with $T_e\approx 10$ eV for non-collective scattering and $T_e\approx 30$ eV for collective scattering. We discuss various broadening mechanisms such as finite aperture effects, density gradients within the collective volume and collisional broadening to account for some of this discrepancy. We also note the significant red/blue asymmetry of the electron plasma waves in the collective scattering spectra, which could relate to kinetic effects distorting the distribution function of the electrons. △ Less

Submitted 10 May, 2019; v1 submitted 7 February, 2019; originally announced February 2019.

Comments: 12 pages, 9 figures, accepted for publication by PPCF

Bow shock fragmentation driven by a thermal instability in laboratory-astrophysics experiments

Authors: F. Suzuki-Vidal, S. V. Lebedev, A. Ciardi, L. A. Pickworth, R. Rodriguez, J. M. Gil, G. Espinosa, P. Hartigan, G. F. Swadling, J. Skidmore, G. N. Hall, M. Bennett, S. N. Bland, G. Burdiak, P. de Grouchy, J. Music, L. Suttle, E. Hansen, A. Frank

Abstract: The role of radiative cooling during the evolution of a bow shock was studied in laboratory-astrophysics experiments that are scalable to bow shocks present in jets from young stellar objects. The laboratory bow shock is formed during the collision of two counter-streaming, supersonic plasma jets produced by an opposing pair of radial foil Z-pinches driven by the current pulse from the MAGPIE puls… ▽ More The role of radiative cooling during the evolution of a bow shock was studied in laboratory-astrophysics experiments that are scalable to bow shocks present in jets from young stellar objects. The laboratory bow shock is formed during the collision of two counter-streaming, supersonic plasma jets produced by an opposing pair of radial foil Z-pinches driven by the current pulse from the MAGPIE pulsed-power generator. The jets have different flow velocities in the laboratory frame and the experiments are driven over many times the characteristic cooling time-scale. The initially smooth bow shock rapidly develops small-scale non-uniformities over temporal and spatial scales that are consistent with a thermal instability triggered by strong radiative cooling in the shock. The growth of these perturbations eventually results in a global fragmentation of the bow shock front. The formation of a thermal instability is supported by analysis of the plasma cooling function calculated for the experimental conditions with the radiative packages ABAKO/RAPCAL. △ Less

Submitted 9 November, 2015; v1 submitted 22 September, 2015; originally announced September 2015.

Comments: 9 pages, 5 figures, Accepted for publication in The Astrophysical Journal on 5th November 2015

MSC Class: 85-05 ACM Class: J.2.1, J.2.9

Experimental Studies of Magnetically Driven Plasma Jets

Authors: F. Suzuki-Vidal, S. V. Lebedev, S. N. Bland, G. N. Hall, G. Swadling, A. J. Harvey-Thompson, G. Burdiak, P. de Grouchy, J. P. Chittenden, A. Marocchino, M. Bocchi, A. Ciardi, A. Frank, S. C. Bott

Abstract: We present experimental results on the formation of supersonic, radiatively cooled jets driven by pressure due to the toroidal magnetic field generated by the 1.5 MA, 250 ns current from the MAGPIE generator. The morphology of the jet produced in the experiments is relevant to astrophysical jet scenarios in which a jet on the axis of a magnetic cavity is collimated by a toroidal magnetic field as… ▽ More We present experimental results on the formation of supersonic, radiatively cooled jets driven by pressure due to the toroidal magnetic field generated by the 1.5 MA, 250 ns current from the MAGPIE generator. The morphology of the jet produced in the experiments is relevant to astrophysical jet scenarios in which a jet on the axis of a magnetic cavity is collimated by a toroidal magnetic field as it expands into the ambient medium. The jets in the experiments have similar Mach number, plasma beta and cooling parameter to those in protostellar jets. Additionally the Reynolds, magnetic Reynolds and Peclet numbers are much larger than unity, allowing the experiments to be scaled to astrophysical flows. The experimental configuration allows for the generation of episodic magnetic cavities, suggesting that periodic fluctuations near the source may be responsible for some of the variability observed in astrophysical jets. Preliminary measurements of kinetic, magnetic and Poynting energy of the jets in our experiments are presented and discussed, together with estimates of their temperature and trapped toroidal magnetic field. △ Less

Submitted 10 December, 2010; originally announced December 2010.

Comments: 7 pages, 6 figures, accepted for publication in Astrophysics & Space Science

Journal ref: Astrophysics and Space Science, November 2011, Volume 336, Issue 1, pp 41-46

Formation of Episodic Magnetically Driven Radiatively Cooled Plasma Jets in the Laboratory

Authors: F. Suzuki-Vidal, S. V. Lebedev, A. Ciardi, S. N. Bland, J. P. Chittenden, G. N. Hall, A. Harvey-Thompson, A. Marocchino, C. Ning, C. Stehle, A. Frank, E. G. Blackman, S. C. Bott, T. Ray

Abstract: We report on experiments in which magnetically driven radiatively cooled plasma jets were produced by a 1 MA, 250 ns current pulse on the MAGPIE pulsed power facility. The jets were driven by the pressure of a toroidal magnetic field in a ''magnetic tower'' jet configuration. This scenario is characterized by the formation of a magnetically collimated plasma jet on the axis of a magnetic ''bubbl… ▽ More We report on experiments in which magnetically driven radiatively cooled plasma jets were produced by a 1 MA, 250 ns current pulse on the MAGPIE pulsed power facility. The jets were driven by the pressure of a toroidal magnetic field in a ''magnetic tower'' jet configuration. This scenario is characterized by the formation of a magnetically collimated plasma jet on the axis of a magnetic ''bubble'', confined by the ambient medium. The use of a radial metallic foil instead of the radial wire arrays employed in our previous work allows for the generation of episodic magnetic tower outflows which emerge periodically on timescales of ~30 ns. The subsequent magnetic bubbles propagate with velocities reaching ~300 km/s and interact with previous eruptions leading to the formation of shocks. △ Less

Submitted 1 April, 2009; originally announced April 2009.

Comments: 6 pages, 5 figures. Accepted for publication in Astrophysics & Space Science

Journal ref: Astrophys.Space Sci.322:19-23,2009