-
TL properties of RE-Doped and Co-doped Sol-gel Silica Rods. Application to Passive (OSL) and Real-time (RL) Dosimetry
Authors:
Mourad Benabdesselam,
J. Bahout,
Franck Mady,
Wilfried Blanc,
Hicham El Hamzaoui,
Andy Cassez,
Karen Delplace-Baudelle,
Remi Habert,
Geraud Bouwmans,
Mohamed Bouazaoui,
Bruno Capoen
Abstract:
Two rods made from sol-gel silica have been doped with Ce ions or co-doped with Ce and Tb ions respectively. First, a thermoluminescence (TL) characterization of the trapping and luminescence parameters is carried out to understand the physical mechanisms involved following the irradiation of these rods and to evaluate their dosimetric properties. The optically stimulated luminescence (OSL) and th…
▽ More
Two rods made from sol-gel silica have been doped with Ce ions or co-doped with Ce and Tb ions respectively. First, a thermoluminescence (TL) characterization of the trapping and luminescence parameters is carried out to understand the physical mechanisms involved following the irradiation of these rods and to evaluate their dosimetric properties. The optically stimulated luminescence (OSL) and the radioluminescence (RL) responses as a function of respectively absorbed dose and dose rate are assessed. The OSL response of both rods is linear as a function of the absorbed dose. The RL sensitivity of both rods proves not only to be extremely high but also shows a linear behavior over more than 6 decades, allowing real-time detection of dose rates as low as few $μ$Gy s$^{-1}$, a threshold that to our knowledge, has never been reached. The results from RL and OSL show that these silica-based doped rods are potentially suitable for medical dosimetry and environmental monitoring around nuclear sites.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
The incorporation site of Er in nanosized CaF 2
Authors:
Francesco D'Acapito,
Stefano Pelli-Cresi,
Wilfried Blanc,
Mourad Benabdesselam,
Franck Mady,
Patrick Gredin,
Michel Mortier
Abstract:
The incorporation site of Er dopants inserted at high and low concentration (respectively 5 and 0.5 mol %) in nanoparticles of CaF 2 is studied by X-ray Absorption Spectroscopy (XAS) at the Er L III edge. The experimental data are compared with the results of structural modeling based on Density Functional Theory (DFT). DFT-based molecular dynamics is also used to simulate complete theoretical EXA…
▽ More
The incorporation site of Er dopants inserted at high and low concentration (respectively 5 and 0.5 mol %) in nanoparticles of CaF 2 is studied by X-ray Absorption Spectroscopy (XAS) at the Er L III edge. The experimental data are compared with the results of structural modeling based on Density Functional Theory (DFT). DFT-based molecular dynamics is also used to simulate complete theoretical EXAFS spectra of the model structures. The results is that Er substitutes for Ca in the structure and in the low concentration case the dopant ions are isolated. At high concentration the rare earth ions cluster together binding Ca vacancies.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
-
Steady photo-darkening of thulium alumino-silicate fibers pumped at $1.07~μm$: Quantitative effect of lanthanum, cerium and thulium
Authors:
Jean-François Lupi,
Manuel Vermillac,
Wilfried Blanc,
Franck Mady,
Mourad Benabdesselam,
Bernard Dussardier,
Daniel R. Neuville
Abstract:
By pumping thulium-doped silica-based fibers at 1.07~μm, rapid generation of absorbing centers leads to photo-induced attenuation (PIA). This detrimental effect prevents exploiting laser emissions in the visible and near infrared. We report on the characterization of the PIA versus the fiber core composition, particularly the concentration of thulium (Tm), lanthanum (La) and cerium (Ce) ions. We s…
▽ More
By pumping thulium-doped silica-based fibers at 1.07~μm, rapid generation of absorbing centers leads to photo-induced attenuation (PIA). This detrimental effect prevents exploiting laser emissions in the visible and near infrared. We report on the characterization of the PIA versus the fiber core composition, particularly the concentration of thulium (Tm), lanthanum (La) and cerium (Ce) ions. We show that UV emision induced by Tm-Tm energy transfers is the source of photo-darkening, and that lanthanum and cerium are efficient hardeners against PIA.
△ Less
Submitted 1 July, 2016;
originally announced July 2016.
-
Photonic glass-ceramics: consolidated outcomes and prospects
Authors:
Brigitte Boulard,
Tran T. T. Van,
Anna Łukowiak,
Adel Bouajaj,
Rogéria Rocha Gonçalves,
Andrea Chiappini,
Alessandro Chiasera,
Wilfried Blanc,
Alicia Duran,
Sylvia Turrell,
Francesco Prudenzano,
Francesco Scotognella,
Roberta Ramponi,
Marian Marciniak,
Giancarlo Righini,
Maurizio Ferrari
Abstract:
Transparent glass-ceramics are nanocomposite materials which offer specific characteristics of capital importance in photonics. This kind of two-phase materials is constituted by nanocrystals embedded in a glass matrix and the respective composition and volume fractions of crystalline and amorphous phase determine the properties of the glass-ceramic. Among these properties transparency is crucial,…
▽ More
Transparent glass-ceramics are nanocomposite materials which offer specific characteristics of capital importance in photonics. This kind of two-phase materials is constituted by nanocrystals embedded in a glass matrix and the respective composition and volume fractions of crystalline and amorphous phase determine the properties of the glass-ceramic. Among these properties transparency is crucial, in particular when confined structures, such as dielectric optical waveguides and optical fibers, are considered, and the number of papers devoted to this topic is continuously increasing. Another important point is the role of the nanocrystals when activated by luminescent species, as rare earth ions, and their effect on the spectroscopic properties of the glass-ceramic. The presence of the crystalline environment around the rare earth ion allows high absorption and emission cross sections, reduction of the non-radiative relaxation thanks to the lower phonon cutoff energy, and tailoring of the ion-ion interaction by the control of the rare earth ion partition. This last point is crucial and still object of intense experimental and theoretical studies. The composition of the glass matrix also impacts the properties of the rare earth ions located in nanoparticles. Moreover, some kinds of nanocrystals can play as effective rare earth sensitizers. Fabrication, assessment and application of glass-ceramic photonic systems, especially waveguides, deserve an appropriate discussion which is the aim of this paper, focused on luminescent glass-ceramics. In this work, a brief historical review, consolidated results and recent advances in this important scientific and technological area will be presented, and some perspectives will be outlined.
△ Less
Submitted 12 November, 2015;
originally announced November 2015.
-
Formation and applications of nanoparticles in silica optical fibers
Authors:
Wilfried Blanc,
Bernard Dussardier
Abstract:
Optical fibers are the basis for applications that have grown considerably in recent years (telecommunications, sensors, fiber lasers, etc). Despite undeniable successes, it is necessary to develop new generations of amplifying optical fibers that will overcome some limitations typical of silica glass. In this sense, the amplifying Transparent Glass Ceramics (TGC), and particularly the fibers base…
▽ More
Optical fibers are the basis for applications that have grown considerably in recent years (telecommunications, sensors, fiber lasers, etc). Despite undeniable successes, it is necessary to develop new generations of amplifying optical fibers that will overcome some limitations typical of silica glass. In this sense, the amplifying Transparent Glass Ceramics (TGC), and particularly the fibers based on this technology, open new perspectives that combine the mechanical and chemical properties of a glass host with the augmented spectroscopic properties of embedded nanoparticles. This paper is an opportunity to make a state of the art on silica-based optical fibers containing nanoparticles of various types, particularly rare-earth-doped oxide nanoparticles, and on the methods for making such fibers. In the first section of this article, we will review basics on standard optical fibers and on nanoparticle-doped fibers. In the second section we will recall some fabrication methods used for standard optical fibers, and in the third section we will describe how TGC fibers can be obtained. This new generation of fibers, initiated a decade ago, already show very positive outlook and results departing from those obtained previously in homogeneous silica fibers. The next few years should see the emergence of new components based on these optical fibers.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
Erbium-doped nanoparticles in silica-based optical fibres
Authors:
Wilfried Blanc,
Valérie Mauroy,
Bernard Dussardier
Abstract:
Developing of new rare-earth (RE)-doped optical fibres for power amplifiers and lasers requires continuous improvements in the fibre spectroscopic properties (like shape and width of the gain curve, optical quantum efficiency, resistance to spectral hole burning and photodarkening...). Silica glass as a host material for fibres has proved to be very attractive. However, some potential applications…
▽ More
Developing of new rare-earth (RE)-doped optical fibres for power amplifiers and lasers requires continuous improvements in the fibre spectroscopic properties (like shape and width of the gain curve, optical quantum efficiency, resistance to spectral hole burning and photodarkening...). Silica glass as a host material for fibres has proved to be very attractive. However, some potential applications of RE-doped fibres suffer from limitations in terms of spectroscopic properties resulting from clustering or inappropriate local environment when doped into silica. To this aim, we present a new route to modify some spectroscopic properties of RE ions in silica-based fibres based on the incorporation of erbium ions in amorphous dielectric nanoparticles, grown in-situ in fibre preforms. By adding alkaline earth elements, in low concentration into silica, one can obtain a glass with an immiscibility gap. Then, phase separation occurs under an appropriate heat treatment. We investigated the role of three alkaline-earth elements: magnesium, calcium and strontium. We present the achieved stabilisation of nanometric erbium-doped dielectric nanoparticles within the core of silica fibres. We present the nanoparticle dimensional characterisation in fibre samples. We also show the spectroscopic characterisation of erbium in preform and fibre samples with different compositions. This new route could have important potentials in improving RE-doped fibre amplifiers and laser sources.
△ Less
Submitted 21 September, 2012;
originally announced September 2012.
-
Coherent combining in an Yb doped double core fiber laser
Authors:
Johan Boullet,
David Sabourdy,
Agnès Desfarges-Berthelemot,
Vincent Kermène,
Dominique Pagnoux,
Philippe Roy,
Bernard Dussardier,
Wilfried Blanc
Abstract:
Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining efficiency is obtained when both cores are coupled via a biconical fused taper in a Michelson interferometer configuration.
Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining efficiency is obtained when both cores are coupled via a biconical fused taper in a Michelson interferometer configuration.
△ Less
Submitted 15 September, 2012;
originally announced September 2012.
-
Preparation and characterization of highly thulium- and alumina-doped optical fibers for single-frequency fiber lasers
Authors:
Pavel Honzatko,
Anirban Dhar,
Ivan Kasik,
Ondrej Podrazky,
Vlastimil Matejec,
Pavel Peterka,
Wilfried Blanc,
Bernard Dussardier
Abstract:
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping concentration of thulium ions should be achieved to allow for high absorption of light at a pump wavelength while the thulium ions clustering should be avoided to pre…
▽ More
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping concentration of thulium ions should be achieved to allow for high absorption of light at a pump wavelength while the thulium ions clustering should be avoided to prevent the cooperative upconversion and quenching processes. The fabricated fibers featured pump absorption up to 70dB/m at a pump wavelength of 1611nm. The single-frequency master oscillator with a resonator composed of a pair of fiber Bragg gratings and a thulium-doped fiber was demonstrated with predominantly single ended operation. We achieved a slope efficiency of 22% and a threshold of 22mW at a lasing wavelength of 1944nm.
△ Less
Submitted 14 September, 2012;
originally announced September 2012.
-
Thulium-doped silica fibers with enhanced 3H4 level lifetime: modelling the devices for 800-820 nm band
Authors:
Pavel Peterka,
Ivan Kasik,
Anirban Dhar,
Bernard Dussardier,
Wilfried Blanc
Abstract:
Silica-based thulium-doped fiber devices operating around 810 nm would extend the spectral range covered by high- power fiber devices. Using a comprehensive numerical model of the fiber we have shown that efficient lasing at 810 nm can be achieved for specific ranges of the laser cavity parameters in silica-based thulium-doped fibers with enhanced 3H4 lifetime up to 58 \mus as measured in our high…
▽ More
Silica-based thulium-doped fiber devices operating around 810 nm would extend the spectral range covered by high- power fiber devices. Using a comprehensive numerical model of the fiber we have shown that efficient lasing at 810 nm can be achieved for specific ranges of the laser cavity parameters in silica-based thulium-doped fibers with enhanced 3H4 lifetime up to 58 \mus as measured in our highly alumina-codoped fibers. We present optimization of the thulium-doped fiber and laser cavity parameters and also potential applications of the developed host material in amplifiers and broadband sources.
△ Less
Submitted 14 September, 2012;
originally announced September 2012.
-
Experimental phase-space-based optical amplification of scar modes
Authors:
Claire Michel,
Tascu Sorin,
Valerie Doya,
Pierre Aschieri,
Wilfried Blanc,
Olivier Legrand,
Fabrice Mortessagne
Abstract:
Waves billiard which are chaotic in the geometrical limit are known to support non-generic spatially localized modes called scar modes. The interaction of the scar modes with gain has been recently investigated in optics in micro-cavity lasers and vertically-cavity surface-emitting lasers. Exploiting the localization properties of scar modes in their wave analogous phase space representation, we r…
▽ More
Waves billiard which are chaotic in the geometrical limit are known to support non-generic spatially localized modes called scar modes. The interaction of the scar modes with gain has been recently investigated in optics in micro-cavity lasers and vertically-cavity surface-emitting lasers. Exploiting the localization properties of scar modes in their wave analogous phase space representation, we report experimental results of scar modes selection by gain in a doped D-shaped optical fiber.
△ Less
Submitted 6 April, 2012;
originally announced April 2012.
-
Tailoring of the luminescent ions local environment in optical fibers, and applications
Authors:
Bernard Dussardier,
Wilfried Blanc,
P. Peterka
Abstract:
The chapter is situated in the fields of fiber materials sciences and technologies (particularly dealing with the fiber glass compositions and luminescent ion doping, and transparent glass ceramic optical fibers), and applications such as fiber lasers and amplifiers. We propose to present a review of research activities on rare-earth (RE) and transition metals (TM) doped silica-based optical fiber…
▽ More
The chapter is situated in the fields of fiber materials sciences and technologies (particularly dealing with the fiber glass compositions and luminescent ion doping, and transparent glass ceramic optical fibers), and applications such as fiber lasers and amplifiers. We propose to present a review of research activities on rare-earth (RE) and transition metals (TM) doped silica-based optical fibers, aiming at understanding theier spectral properties, and particularly some of their optical transitions that will allow interesting and alternative applications. Silica, as opposed to alternative, low temperature materials, is chosen for practical and economical reasons. Selected RE and TM ions are studied both as probes of their local environment and for their application potentials. In this chapter, we will focus on erbium (Er) ions for the potential spectral 'tailoring' of its gain curve at 1.55 $μ$m, thulium (Tm) as local environment probe along both near infrared transitions around 0.8 and 1.47 $μ$m, and chromium (Cr) for the sensitivity of valency and spectroscopy to the glass composition and its potential as saturable absorber in lasers. We will present some extensive studies on the influence of the local environment on dopants: such as (but not limited to) energy transfer mechanisms between rare-earth ions of same nature (Tm-Tm) or different nature (Yb-Tm), effect of the local phonon energy on Tm ions emission efficiency, broadening of Er ions emission induced by oxide nanoparticles grown in situ during the fabrication process, etc. Knowledge of these effects is essential for photonics applications, and many studies are under progress or are still needed in this field. The potential of some applications which could benefit from the basic studies on materials are also numerically studied : 0.8-$μ$m thulium-doped fiber laser, so-called S-band (1.47 $μ$m) thulium-doped amplifier for telecommunications and laser applications, sensitisation of Tm-based devices using ytterbium sensitized ions.
△ Less
Submitted 5 January, 2012;
originally announced January 2012.
-
Fabrication of Rare Earth-Doped Transparent Glass Ceramic Optical Fibers by Modified Chemical Vapor Deposition
Authors:
Wilfried Blanc,
Valérie Mauroy,
Luan Nguyen,
S. N. B. Bhaktha,
Patrick Sebbah,
Bishnu P. Pal,
Bernard Dussardier
Abstract:
Rare earth (RE) doped silica-based optical fibers with transparent glass ceramic (TGC) core was fabricated through the well-known modified chemical vapor deposition (MCVD) process without going through the commonly used stage of post-ceramming. The main characteristics of the RE-doped oxyde nanoparticles namely, their density and mean diameter in the fibers are dictated by the concentration of alk…
▽ More
Rare earth (RE) doped silica-based optical fibers with transparent glass ceramic (TGC) core was fabricated through the well-known modified chemical vapor deposition (MCVD) process without going through the commonly used stage of post-ceramming. The main characteristics of the RE-doped oxyde nanoparticles namely, their density and mean diameter in the fibers are dictated by the concentration of alkaline earth element used as phase separating agent. Magnesium and erbium co-doped fibers were fabricated. Optical transmission in term of loss due to scattering as well as some spectroscopic characteristics of the erbium ions was studied. For low Mg content, nano-scale particles could be grown with and relatively low scattering losses were obtained, whereas large Mg-content causes the growth of larger particles resulting in much higher loss. However in the latter case, certain interesting alteration of the spectroscopic properties of the erbium ions were observed. These initial studies should be useful in incorporating new doped materials in order to realize active optical fibers for constructing lasers and amplifiers.
△ Less
Submitted 16 August, 2011;
originally announced August 2011.
-
Spectroscopic signature of phosphate crystallization in Erbium-doped optical fibre preforms
Authors:
Romain Peretti,
Anne-Marie Jurdyc,
Bernard Jacquier,
Wilfried Blanc,
Bernard Dussardier
Abstract:
In rare-earth-doped silica optical fibres, the homogeneous distribution of amplifying ions and part of their spectroscopic properties are usually improved by adding selected elements, such as phosphorus or aluminum, as structural modifier. In erbium ion (Er3+) doped fibres, phosphorus preferentially coordinates to Er3+ ions to form regular cages around it. However, the crystalline structures descr…
▽ More
In rare-earth-doped silica optical fibres, the homogeneous distribution of amplifying ions and part of their spectroscopic properties are usually improved by adding selected elements, such as phosphorus or aluminum, as structural modifier. In erbium ion (Er3+) doped fibres, phosphorus preferentially coordinates to Er3+ ions to form regular cages around it. However, the crystalline structures described in literature never gave particular spectroscopic signature. In this article, we report emission and excitation spectra of Er3+ in a transparent phosphorus-doped silica fibre preform. The observed line features observed at room and low temperature are attributed to ErPO4 crystallites.
△ Less
Submitted 15 March, 2011;
originally announced March 2011.
-
In-Situ Grown Erbium-Doped Dielectric Nanoparticles in Silica-Based Transparent Optical Fibers
Authors:
Bernard Dussardier,
Wilfried Blanc,
Valérie Mauroy,
Michèle Ude,
Stanislaw Trzesien,
Franck Mady,
Mourad Benabdesselam,
Gérard Monnom
Abstract:
An efficient method to fabricate transparent glass ceramic fibers containing in-situ grown Er3+-doped oxide nanoparticles is presented. Characterization of the drawn fibers exhibits low loss (0.4 dB/m) and broadened Er3+ emission spectrum. This attractive method offers new scopes for fiber amplifiers.
An efficient method to fabricate transparent glass ceramic fibers containing in-situ grown Er3+-doped oxide nanoparticles is presented. Characterization of the drawn fibers exhibits low loss (0.4 dB/m) and broadened Er3+ emission spectrum. This attractive method offers new scopes for fiber amplifiers.
△ Less
Submitted 25 January, 2011; v1 submitted 14 January, 2011;
originally announced January 2011.
-
Energy transfer up-conversion in Tm3+-doped silica fiber
Authors:
David A. Simpson,
Gregory W. Baxter,
Stephen F. Collins,
W. E. K. Gibbs,
Wilfried Blanc,
Bernard Dussardier,
Gérard Monnom
Abstract:
A study of the mechanisms responsible for the infra-red to near infra-red up-conversion in Tm3+-doped silica fibers is presented. Upconversion luminescence was observed from the 3H4 level of Tm3+ under 1586 nm pumping into the 3F4 level. The quadratic dependence of the up-conversion luminescence at 800 nm on the 1800 nm luminescence from the 3F4 level confirms that the 3H4 level is populated by a…
▽ More
A study of the mechanisms responsible for the infra-red to near infra-red up-conversion in Tm3+-doped silica fibers is presented. Upconversion luminescence was observed from the 3H4 level of Tm3+ under 1586 nm pumping into the 3F4 level. The quadratic dependence of the up-conversion luminescence at 800 nm on the 1800 nm luminescence from the 3F4 level confirms that the 3H4 level is populated by a two photon process. Two possible processes are proposed as mechanisms responsible for the up-conversion: excited state absorption and energy transfer up-conversion. The decay characteristics of the luminescence from the 3H4 level were studied under direct and indirect pumping at 786 and 1586 nm, respectively. By comparing the decay waveforms to the solution of a simple set of rate equations, the energy transfer up-conversion process (3F4, 3F4 ! 3H4, 3H6) was established at Tm2O3 concentrations greater than 200 ppm.
△ Less
Submitted 7 April, 2010;
originally announced April 2010.
-
Improvement of the Tm3+:3H4 level lifetime in silica optical fibres by lowering the local phonon energy
Authors:
Basile Faure,
Wilfried Blanc,
Bernard Dussardier,
Gérard Monnom
Abstract:
The role of some glass network modifiers on the quantum efficiency of the near-infrared fluorescence from the 3H4 level of Tm3+ ion in silica-based doped fibres is studied. Modifications of the core composition affect the spectroscopic properties of Tm3+ ion. Adding 17.4 mol% of AlO3/2 to the core glass caused an increase of the 3H4 level lifetime up to 50 $μ$s, 3.6 times higher than in pure sil…
▽ More
The role of some glass network modifiers on the quantum efficiency of the near-infrared fluorescence from the 3H4 level of Tm3+ ion in silica-based doped fibres is studied. Modifications of the core composition affect the spectroscopic properties of Tm3+ ion. Adding 17.4 mol% of AlO3/2 to the core glass caused an increase of the 3H4 level lifetime up to 50 $μ$s, 3.6 times higher than in pure silica glass. The quantum efficiency was increased from 2% to approximately 8%. On the opposite, 8 mol% of PO5/2 in the core glass made the lifetime decrease downto 9 $μ$s. These changes of Tm3+ optical properties are assigned to the change of the local phonon energy to which they are submitted by modifiers located in the vicinity of the doping sites. Some qualitative predictions of the maximum achievable quantum efficiency are possible using a simple microscopic model to calculate the non-radiative de-excitation rates.
△ Less
Submitted 28 February, 2010;
originally announced March 2010.
-
Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings
Authors:
Minh Châu Phan Huy,
Guillaume Laffont,
Véronique Dewynter,
Pierre Ferdinand,
Dominique Pagnoux,
Bernard Dussardier,
Wilfried Blanc
Abstract:
The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\degree C in a six-hole MOF, and the maximum sensi…
▽ More
The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\degree C in a six-hole MOF, and the maximum sensitivity is reduced. Such passive FBG temperature compensation technique is of great interest for applications involving accurate sensing free of thermal effects.
△ Less
Submitted 28 February, 2010;
originally announced March 2010.
-
Luminescent Ions in Silica-Based Optical Fibers
Authors:
Bernard Dussardier,
Wilfried Blanc,
Gérard Monnom
Abstract:
We present some of our research activities dedicated to doped silica-based optical fibers, aiming at understanding the spectral properties of luminescent ions, such as rare-earth and transition metal elements. The influence of the local environment on dopants is extensively studied: energy transfer mechanisms between rare-earth ions, control of the valence state of chromium ions, effect of the l…
▽ More
We present some of our research activities dedicated to doped silica-based optical fibers, aiming at understanding the spectral properties of luminescent ions, such as rare-earth and transition metal elements. The influence of the local environment on dopants is extensively studied: energy transfer mechanisms between rare-earth ions, control of the valence state of chromium ions, effect of the local phonon energy on thulium ions emission efficiency, and broadening of erbium ions emission induced by oxide nanoparticles. Knowledge of these effects is essential for photonics applications.
△ Less
Submitted 9 November, 2009;
originally announced November 2009.
-
Role of CaO addition in the local order around Erbium in SiO2 ?GeO2 ?P2O5 fiber preforms
Authors:
Francesco D'Acapito,
Chiara Maurizio,
M. C. Paul,
Thomas Sebastian Lee,
Wilfried Blanc,
Bernard Dussardier
Abstract:
The development of materials for optical signal processing represents a major issue in present technology. In this contribution we present a study on Er-doped fiber preforms where particular attention is devoted on how the addition of CaO in the glass modifies the local environment of the rare earth. The results from photoluminescence and Extended X-ray Absorption Fine Structure (EXAFS) are comp…
▽ More
The development of materials for optical signal processing represents a major issue in present technology. In this contribution we present a study on Er-doped fiber preforms where particular attention is devoted on how the addition of CaO in the glass modifies the local environment of the rare earth. The results from photoluminescence and Extended X-ray Absorption Fine Structure (EXAFS) are compared and a clear link between the width of the emission line at 1.5 $μ$m and the amorphous/crystalline local structure around the Er3+ ion is evidenced.
△ Less
Submitted 6 November, 2009;
originally announced November 2009.
-
Er doped oxide nanoparticles in silica based optical fibres
Authors:
Wilfried Blanc,
Bernard Dussardier,
M. C. Paul
Abstract:
Erbium doped materials are of great interest in optical telecommunications due to the Er3+ intra-4f emission at 1.54 ?m. Erbium doped fibre amplifiers (EDFA) were developed in silica glass because of the low losses at this wavelength and the reliability of this glass. Developments of new rare earth doped fibre amplifiers aim to control their spectroscopic properties including shape and width of…
▽ More
Erbium doped materials are of great interest in optical telecommunications due to the Er3+ intra-4f emission at 1.54 ?m. Erbium doped fibre amplifiers (EDFA) were developed in silica glass because of the low losses at this wavelength and the reliability of this glass. Developments of new rare earth doped fibre amplifiers aim to control their spectroscopic properties including shape and width of the gain curve and optical quantum efficiency. Standard silica glass modifiers, such as aluminium, result in very good properties in current EDFA. However, for more drastic spectroscopic changes, more important modifications of the rare earth ions local environment are required. To address this aim, we present a fibre fabrication route creating rare earth doped calcia?silica or calcia?phosphosilica nanoparticles embedded in silica glass. By adding alkaline earth elements such as calcium, in low concentration, one can obtain a glass with an immisci- bility gap so that phase separation occurs with an appropriate heat treatment. We investigated the role of two elements: calcium and phosphorus (a standard silica modifier). Scanning electron microscopy shows that nanoparticles are only observed when calcium is incorporated. The size of the particles is determined to be around 50 nm in preform samples. The nature of these particles depends on phosphorus content: without P, electron diffraction shows that the particles are amorphous whilst they are partially crystalline when phosphorus is added. In addition through use of energy dispersive x-ray techniques, we have shown that erbium ions are located in the nanoparticles.
△ Less
Submitted 6 November, 2009;
originally announced November 2009.
-
Visible and near infra-red up-conversion in Tm3+/Yb3+ co-doped silica fibres under 980 nm excitation
Authors:
David A. Simpson,
Keith W. E. Gibbs,
Stephen F. Collins,
Wilfried Blanc,
Bernard Dussardier,
Gérard Monnom,
Pavel Peterka,
Gregory W. Baxter
Abstract:
The spectroscopic properties of Tm3+/Yb3+ co-doped silica fibers under excitation at 980 nm are reported. Three distinct up-conversion fluorescence bands were observed in the visible to near infra-red regions. The blue and red fluorescence bands at 475 and 650 nm, respectively, were found to originate from the 1G4 level of Tm3+. A three step up-conversion process was established as the populatin…
▽ More
The spectroscopic properties of Tm3+/Yb3+ co-doped silica fibers under excitation at 980 nm are reported. Three distinct up-conversion fluorescence bands were observed in the visible to near infra-red regions. The blue and red fluorescence bands at 475 and 650 nm, respectively, were found to originate from the 1G4 level of Tm3+. A three step up-conversion process was established as the populating mechanism for these fluorescence bands. The fluorescence band at 800 nm was found to originate from two possible transitions in Tm3+; one being the transition from the 3H4 to 3H6 manifold which was found to dominate at low pump powers; the other being the transition from the 1G4 to 3H6 level which dominates at higher pump powers. The fluorescence lifetime of the 3H4 and 3F4 levels of Tm3+ and 2F5/2 level of Yb3+ were studied as a function of Yb3+ concentration, with no significant energy back transfer from Tm3+ to Yb3+ observed.
△ Less
Submitted 1 September, 2008;
originally announced September 2008.
-
Thulium environment in a silica doped optical fibre
Authors:
Wilfried Blanc,
Thomas Lee Sebastian,
Bernard Dussardier,
Claire Michel,
Basile Faure,
Michèle Ude,
Gérard Monnom
Abstract:
Thulium-doped optical fibre amplifiers (TDFA) are developed to extend the optical telecommunication wavelength division multiplexing (WDM) bandwidth in the so-called S-band (1460-1530 nm). The radiative transition at 1.47 lm (3H4 -> 3F4) competes with a non-radiative multi-phonon de-excitation (3H4 -> 3H5). The quantum efficiency of the transition of interest is then highly affected by the phono…
▽ More
Thulium-doped optical fibre amplifiers (TDFA) are developed to extend the optical telecommunication wavelength division multiplexing (WDM) bandwidth in the so-called S-band (1460-1530 nm). The radiative transition at 1.47 lm (3H4 -> 3F4) competes with a non-radiative multi-phonon de-excitation (3H4 -> 3H5). The quantum efficiency of the transition of interest is then highly affected by the phonon energy (Ep) of the material. For reliability reasons, oxide glasses are preferred but suffer from high phonon energy. In the case of silica glass, Ep is around 1100 cm-1 and quantum efficiency is as low as 2%. To improve it, phonon energy in the thulium environment must be lowered. For that reason, aluminium is added and we explore three different core compositions: pure silica, and silica slightly modified with germanium or phosphorus. The role of aluminium is studied through fluorescence decay curves, fitted according to the continuous function decay analysis. From this analysis, modification of the thulium local environment due to aluminium is evidenced.
△ Less
Submitted 28 August, 2008;
originally announced August 2008.
