Showing 1–23 of 23 results for author: Black, J

Activating high-power parametric oscillation in photonic-crystal resonators

Authors: Grant M. Brodnik, Lindell M. Williams, Haixin Liu, David R. Carlson, Atasi Dan, Jennifer A. Black, Scott B. Papp

Abstract: By engineering the mode spectrum of a Kerr microresonator, we selectively activate nonlinear phase matching amongst broadband parametric gain. At threshold, optical parametric oscillators (OPOs) emerge from vacuum fluctuations in the presence of a pump laser, and above threshold, OPOs seed the formation of intraresonator patterns and states, such as chaos and solitons. These competing nonlinear pr… ▽ More By engineering the mode spectrum of a Kerr microresonator, we selectively activate nonlinear phase matching amongst broadband parametric gain. At threshold, optical parametric oscillators (OPOs) emerge from vacuum fluctuations in the presence of a pump laser, and above threshold, OPOs seed the formation of intraresonator patterns and states, such as chaos and solitons. These competing nonlinear processes hinder an important application of OPOs as wavelength-variable, low-noise sources. Recently, nanopatterned microresonator OPOs have leveraged photonic crystal bandgaps to enable universal phase matching and control of nonlinear interactions. Here, we explore a design paradigm optimized for high-output power that uses geometric dispersion to suppress nonlinear interactions and a photonic crystal bandgap to activate only a single OPO interaction. Our devices convert an input pump laser to output signal and idler waves with powers exceeding 40 mW while maintaining spectral purity and side-mode suppression ratios greater than 40 dB. We show that this approach suits custom wavelengths by measuring four independent oscillators that vary only photonic crystal parameters to select output waves. Our experiments demonstrate that microresonators functionalized by photonic crystals offer a versatile and lossless palette of controls for nonlinear laser conversion. △ Less

Submitted 10 April, 2025; originally announced April 2025.

Comments: 6 pages, 3 figure panels

Implementing photonic-crystal resonator frequency combs in a photonics foundry

Authors: Haixin Liu, Ivan Dickson, Alin Antohe, Lewis G. Carpenter, Jizhao Zang, Alexa R. Carollo, Atasi Dan, Jennifer A. Black, Scott B. Papp

Abstract: We explore an AIM Photonics silicon-nitride platform to fabricate photonic-crystal resonators for generating optical parametric oscillators (OPO) and soliton microcombs. Our approach leverages the scalability and fine feature size of silicon-nitride processing on large-scale silicon wafers to achieve low-loss, high-Q microresonators, functionalized by nano-scale photonic-crystal structures. We dem… ▽ More We explore an AIM Photonics silicon-nitride platform to fabricate photonic-crystal resonators for generating optical parametric oscillators (OPO) and soliton microcombs. Our approach leverages the scalability and fine feature size of silicon-nitride processing on large-scale silicon wafers to achieve low-loss, high-Q microresonators, functionalized by nano-scale photonic-crystal structures. We demonstrate intrinsic microresonator quality factor up to 1.2*10^7 with complete foundry fabrication on 300 mm silicon, a 700 nm thick silicon-nitride device layer, and inclusion of complex nanophotonics. These features enable a host of nonlinear nanophotonics sources on the platform, including OPOs, microcombs, parametric amplifiers, squeezed-light generators, and single-photon sources. By fine-tuning the photonic-crystal design parameters, we achieve broad tunability in the frequency of the OPO output, spanning a significant portion of the near-infrared. Additionally, we observe the formation of soliton frequency combs, enabled by the precise dispersion engineering of the microresonators. These results highlight the potential of widely accessible, photolithographically patterned, silicon-nitride photonics to enable wide access to and complex integration of frequency-comb sources, with applications in spectroscopy, metrology, and communications. △ Less

Submitted 2 January, 2025; originally announced January 2025.

Nanophotonic oscillators for laser conversion beyond an octave

Authors: Grant M. Brodnik, Haixin Liu, David R. Carlson, Jennifer A. Black, Scott B. Papp

Abstract: Many uses of lasers place the highest importance on access to specific wavelength bands. For example, mobilizing optical-atomic clocks for a leap in sensing requires compact lasers at frequencies spread across the visible and near infrared. Integrated photonics enables high-performance, scalable laser platforms, however, customizing laser-gain media to support wholly new bands is challenging and o… ▽ More Many uses of lasers place the highest importance on access to specific wavelength bands. For example, mobilizing optical-atomic clocks for a leap in sensing requires compact lasers at frequencies spread across the visible and near infrared. Integrated photonics enables high-performance, scalable laser platforms, however, customizing laser-gain media to support wholly new bands is challenging and often prohibitively mismatched in scalability to early quantum-based sensing and information systems. Here, we demonstrate a microresonator optical-parametric oscillator (OPO) that converts a pump laser to an output wave within a frequency span exceeding an octave. We achieve phase matching for oscillation by nanopatterning the microresonator to open a photonic-crystal bandgap on the mode of the pump laser. By adjusting the nanophotonic pattern and hence the bandgap, the ratio of output OPO wave frequency span to required pump laser tuning is more than 10,000. We also demonstrate tuning the oscillator in free-spectral-range steps, more finely with temperature, and minimal additive frequency noise of the laser-conversion process. Our work shows that nanophotonics offers control of laser conversion in microresonators, bridging phase-matching of nonlinear optics and application requirements for laser designs. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 8 pages, 3 figures

Multi-Scale Experimental Characterization for LS-DYNA MAT213 Modeling of Composite Structures under High Strain Rate

Authors: Jackob Black, Ryan Premo, Robert K. Goldberg, Trenton M. Ricks, Troy Lyons, Han-Gyu Kim

Abstract: Aerospace structures often experience high strain rate events such as ballistic impact, crash, or crush. A material model has been developed that enhances the capability to simulate the dynamic response of composite materials under these loading conditions. The material model has been implemented into the commercially available transient dynamic finite element code LS-DYNA as MAT213. The model can… ▽ More Aerospace structures often experience high strain rate events such as ballistic impact, crash, or crush. A material model has been developed that enhances the capability to simulate the dynamic response of composite materials under these loading conditions. The material model has been implemented into the commercially available transient dynamic finite element code LS-DYNA as MAT213. The model can simulate the nonlinear deformation, damage, and failure that takes place in a composite under dynamic loading conditions. The specific goal of this work is to characterize the MAT213 input for the representative material. The specific composite material being examined consists of T700G unidirectional carbon fibers and a low-melt PolyArylEtherKetone (LMPAEK) thermoplastic resin system. It is formally referred to as Toray TC1225 LMPAEK T700G. As the initial part of this work, this paper is focused on characterizing the material parameters for the MAT213 deformation model based on results obtained from multi-scale experimentation. The effort concentrated on characterizing the in-plane material response suitable for use with thin shell elements. For shell elements within MAT213, tabulated stress-strain results from tension and compression tests in the longitudinal and transverse directions and in-plane shear tests are required. Due to the difficulty of measuring small strains in the transverse direction, a multi-scale testing method was developed. Macro-scale testing is performed per the typical ASTM methods while micro-scale testing uses a microscope along with smaller coupon sizes to obtain the smaller strains in the transverse direction of each test. For both testing methods, a VIC-2D camera and software for digital image correlation analysis are used. Using the DIC combined with each test fixture, reliable stress and strain data are collected. △ Less

Submitted 17 March, 2024; originally announced March 2024.

High-temperature stability of ambient-cured one-part alkali-activated materials incorporating graphene for thermal energy storage

Authors: Nghia Tran, Tuan Nguyen, Jay Black, Tuan Ngo

Abstract: In this research, the ambient cured one part alkali activated material (AAM) containing graphene nanoplatelets (GNPs), fly ash, slag and silica fume has been investigated after high temperature exposure to 200 to 800oC. Their compressive strength, thermal properties, microstructure, pore structure were characterised through visual observation, isothermal calorimetry, TGA, XRD, SEM-EDS and X-ray CT… ▽ More In this research, the ambient cured one part alkali activated material (AAM) containing graphene nanoplatelets (GNPs), fly ash, slag and silica fume has been investigated after high temperature exposure to 200 to 800oC. Their compressive strength, thermal properties, microstructure, pore structure were characterised through visual observation, isothermal calorimetry, TGA, XRD, SEM-EDS and X-ray CT. The research findings indicated high strength characteristics of the developed AAM (80 MPa) at ambient condition, which could further reach to approx. 100 MPa after being heated up to 400oC. GNPs provided nucleation effects for promoting geopolymerisation and crystallisation. As observed from X-ray CT, a high extent of severe cracks initiated from the core and propagated towards the surface. From SEM-EDS analysis, high Na-Al and Na-Si ratios or low Si-Al and Ca-Si ratios highly correlated to thermal stability. Overall, the research outcomes implied the promising use of the nano-engineered AAMs for thermal energy storage (TES) at 400 to 600oC. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Formation of the Methyl Cation by Photochemistry in a Protoplanetary Disk

Authors: Olivier Berné, Marie-Aline Martin-Drumel, Ilane Schroetter, Javier R. Goicoechea, Ugo Jacovella, Bérenger Gans, Emmanuel Dartois, Laurent Coudert, Edwin Bergin, Felipe Alarcon, Jan Cami, Evelyne Roueff, John H. Black, Oskar Asvany, Emilie Habart, Els Peeters, Amelie Canin, Boris Trahin, Christine Joblin, Stephan Schlemmer, Sven Thorwirth, Jose Cernicharo, Maryvonne Gerin, Alexander Tielens, Marion Zannese , et al. (31 additional authors not shown)

Abstract: Forty years ago it was proposed that gas phase organic chemistry in the interstellar medium was initiated by the methyl cation CH3+, but hitherto it has not been observed outside the Solar System. Alternative routes involving processes on grain surfaces have been invoked. Here we report JWST observations of CH3+ in a protoplanetary disk in the Orion star forming region. We find that gas-phase orga… ▽ More Forty years ago it was proposed that gas phase organic chemistry in the interstellar medium was initiated by the methyl cation CH3+, but hitherto it has not been observed outside the Solar System. Alternative routes involving processes on grain surfaces have been invoked. Here we report JWST observations of CH3+ in a protoplanetary disk in the Orion star forming region. We find that gas-phase organic chemistry is activated by UV irradiation. △ Less

Submitted 6 January, 2024; originally announced January 2024.

Comments: Published in Nature

Journal ref: Nature 621, 56-59 (2023)

Experimental Characterization of Non-Associative Plasticity Flow Rule Coefficients for the LS-DYNA MAT213 Model

Authors: Ryan Premo, Jackob Black, Michael Pereira, Robert K. Goldberg, Trenton M. Ricks, Han-Gyu Kim

Abstract: This project is focused on developing an experimental framework for characterizing non-associative plasticity flow rule coefficients through coupon-scale tests for the LS-DYNA MAT213 model. The main objective is to characterize these coefficients based on the multi-scale (i.e., both microscopic and macroscopic) full-field measurement of the evolution of strain and stress fields. This paper focuses… ▽ More This project is focused on developing an experimental framework for characterizing non-associative plasticity flow rule coefficients through coupon-scale tests for the LS-DYNA MAT213 model. The main objective is to characterize these coefficients based on the multi-scale (i.e., both microscopic and macroscopic) full-field measurement of the evolution of strain and stress fields. This paper focuses on presenting the experimental work on characterizing the full-scale stress-strain curves of T700/LM-PAEK composites under tension, compression, and shear loads. The experimental data set was intended to build a deformation sub-model in the MAT213 model for the material. The strain data were collected using both microscopic and macroscopic digital image correlation techniques. The microscopic technique was particularly useful for fracture cases under small strains. A preliminary simulation result obtained from the MAT213 model is also presented in the paper. The experimental framework herein will be extended to characterize post-peak stress degradation in the composite material and to develop a damage sub-model for the material. This project will contribute to developing a simulation tool based on the MAT213 model for simulating the rate-dependent impact damages in composites under multi-axial loading. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Experimental multi-scale characterization of mode-II interlaminar fracture in geometrically scaled stitched and unstitched resin-infused composites

Authors: Dawson Ozborn, Jackob Black, Wayne Huberty, Christopher Bounds, Han-Gyu Kim

Abstract: This work is focused on investigating the impact of out-of-plane stitches on enhancing mode-II interlaminar fracture toughness (or energy) and characterizing damage progression and crack arrestment in stitched resin-infused composites. For the experimental work, End-Notched Flexure (ENF) quasi-isotropic specimens were manufactured using +/-45 non-crimp carbon-fiber fabrics through a resin-infusion… ▽ More This work is focused on investigating the impact of out-of-plane stitches on enhancing mode-II interlaminar fracture toughness (or energy) and characterizing damage progression and crack arrestment in stitched resin-infused composites. For the experimental work, End-Notched Flexure (ENF) quasi-isotropic specimens were manufactured using +/-45 non-crimp carbon-fiber fabrics through a resin-infusion process. Both stitched and unstitched specimen sets were designed for comparison. For a size effect study, the ENF specimens were geometrically scaled with three scaling levels. Based on the load-displacement data (i.e., global analysis), the fracture energy of the specimen material was analyzed using the compliance calibration method and a size effect theory. The fracture energy values were compared between the stitched and unstitched cases to characterize the enhanced fracture toughness of stitched composites. For local analysis, two types of digital image correlation (DIC) systems were employed: microscopic and macroscopic (i.e., coupon-scale) DIC systems. By analyzing in-plane displacement through the thickness, separation development was characterized along predicted fracture process zones. The impact of out-of-plane stitches on separation propagation along fracture process zones was discussed based on the DIC analysis. This work will contribute to developing a high-fidelity damage model for stitched resin-infused composites in the form of a traction-separation for high-speed aircraft applications. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Threshold and laser-conversion in nanostructured-resonator parametric oscillators

Authors: Haixin Liu, Grant M. Brodnik, Jizhao Zang, David R. Carlson, Jennifer A. Black, Scott B. Papp

Abstract: We explore optical parametric oscillation (OPO) in nanophotonic resonators, enabling arbitrary, nonlinear phase-matching and nearly lossless control of energy conversion. Such pristine OPO laser converters are determined by nonlinear light-matter interactions, making them both technologically flexible and broadly reconfigurable. We utilize a nanostructured inner-wall modulation in the resonator to… ▽ More We explore optical parametric oscillation (OPO) in nanophotonic resonators, enabling arbitrary, nonlinear phase-matching and nearly lossless control of energy conversion. Such pristine OPO laser converters are determined by nonlinear light-matter interactions, making them both technologically flexible and broadly reconfigurable. We utilize a nanostructured inner-wall modulation in the resonator to achieve universal phase-matching for OPO-laser conversion, but coherent backscattering also induces a counterpropagating pump laser. This depletes the intra-resonator optical power in either direction, increasing the OPO threshold power and limiting laser-conversion efficiency, the ratio of optical power in target signal and idler frequencies to the pump. We develop an analytical model of this system that emphasizes an understanding of optimal laser conversion and threshold behaviors, and we use the model to guide experiments with nanostructured-resonator OPO laser-conversion circuits, fully integrated on chip and unlimited by group-velocity dispersion. Our work demonstrates the fundamental connection between OPO laser-conversion efficiency and the resonator coupling rate, subject to the relative phase and power of counterpropagating pump fields. We achieve $(40\pm4)$ mW of on-chip power, corresponding to $(41\pm4)$% conversion efficiency, and discover a path toward near-unity OPO laser conversion efficiency. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Tunable lasers with optical-parametric oscillation in photonic-crystal resonators

Authors: Jennifer A. Black, Grant Brodnik, Haixin Liu, Su-Peng Yu, David R. Carlson, Jizhao Zang, Travis C. Briles, Scott B. Papp

Abstract: By design access to laser wavelength, especially with integrated photonics, is critical to advance quantum sensors like optical clocks and quantum-information systems, and open opportunities in optical communication. Semiconductor-laser gain provides exemplary efficiency and integration but merely in developed wavelength bands. Alternatively, nonlinear optics requires control of phase matching, bu… ▽ More By design access to laser wavelength, especially with integrated photonics, is critical to advance quantum sensors like optical clocks and quantum-information systems, and open opportunities in optical communication. Semiconductor-laser gain provides exemplary efficiency and integration but merely in developed wavelength bands. Alternatively, nonlinear optics requires control of phase matching, but the principle of nonlinear conversion of a pump laser to a designed wavelength is extensible. We report on laser-wavelength access by versatile customization of optical-parametric oscillation (OPO) with a photonic-crystal resonator (PhCR). By controlling the bandgap of a PhCR, we enable OPO generation across a wavelength range of 1234-2093 nm with a 1550 nm pump and 1016-1110 nm with a 1064 nm pump. Moreover, our tunable laser platform offers pump-to-sideband conversion efficiency of >10% and negligible additive optical-frequency noise across the output range. From laser design to simulation of nonlinear dynamics, we use a Lugiato-Lefever framework that predicts the system characteristics, including bi-directional OPO generation in the PhCR and conversion efficiency in agreement with our observations. Our experiments introduce tunable lasers by design with PhCR OPOs, providing critical functionalities in integrated photonics. △ Less

Submitted 21 June, 2022; originally announced June 2022.

Comments: 6 pages, 5 figures

Optical synthesis by spectral translation

Authors: Jennifer A. Black, Zachary L. Newman, Su-Peng Yu, David R. Carlson, Scott B. Papp

Abstract: Optical-frequency synthesizers are lasers stabilized and programmed from a microwave clock for applications, especially in fundamental measurements and spectroscopy, optical-communication links, and precision sensing of numerous physical effects. In a synthesizer, a frequency comb provides a reference grid across a broad spectrum and a frequency-tunable laser accomplishes synthesis by phase-lock t… ▽ More Optical-frequency synthesizers are lasers stabilized and programmed from a microwave clock for applications, especially in fundamental measurements and spectroscopy, optical-communication links, and precision sensing of numerous physical effects. In a synthesizer, a frequency comb provides a reference grid across a broad spectrum and a frequency-tunable laser accomplishes synthesis by phase-lock to the comb. Optical synthesizers have matured to chip-scale with integrated photonics, however, the tunable laser and frequency comb fundamentally constrain the tuning range. Here, we present an optical synthesizer based on four-wave mixing (FWM) spectral translation of a tunable laser and a frequency comb. We implement both the spectral translation and the frequency comb by use of advanced microresonators. The intrinsic energy conservation of FWM ensures deterministic optical synthesis, and it allows a nearly arbitrary frequency tuning range by the dependence of resonant FWM on group-velocity dispersion, temperature, and tunable laser frequency. Moreover, we take advantage of highly efficient parametric amplification associated with spectral translation. We operate spectral translation across output ranges up to 200 THz, and we characterize it through ultraprecise optical-frequency metrology, demonstrating <0.1 Hz absolute accuracy and a fractional frequency precision of 4.7x10^(-13) in 1 s measurements. Our experiments introduce integrated-nonlinear-photonic circuits that enable complex intrinsic functionalities, such as our approach to optical-frequency synthesis with nearly limitless bandwidth. △ Less

Submitted 28 December, 2021; originally announced December 2021.

Group-velocity dispersion engineering of tantala integrated photonics

Authors: Jennifer A. Black, Richelle Streater, Kieran F. Lamee, David R. Carlson, Su-Peng Yu, Scott B. Papp

Abstract: Designing integrated photonics, especially to leverage Kerr-nonlinear optics, requires accurate and precise knowledge of refractive index across the visible to infrared spectral ranges. Tantala (Ta_2O_5) is an emerging material platform for integrated photonics and nanophotonics that offers broadband ultralow loss, moderately high nonlinearity, and advantages for scalable and heterogeneous integra… ▽ More Designing integrated photonics, especially to leverage Kerr-nonlinear optics, requires accurate and precise knowledge of refractive index across the visible to infrared spectral ranges. Tantala (Ta_2O_5) is an emerging material platform for integrated photonics and nanophotonics that offers broadband ultralow loss, moderately high nonlinearity, and advantages for scalable and heterogeneous integration. We present refractive-index measurements on a thin film of tantala, and we explore the efficacy of this data for group-velocity dispersion (GVD) engineering with waveguide and ring-resonator devices. In particular, the observed spectral extent of supercontinuum generation in fabricated waveguides, and the wavelength dependence of free spectral range (FSR) in optical resonators provide a sensitive test of our integrated-photonics design process. Our work opens up new design possibilities with tantala, including with octave-spanning soliton microcombs. △ Less

Submitted 29 September, 2020; originally announced September 2020.

Simple, compact, high-resolution monochromatic x-ray source for characterization of x-ray calorimeter arrays

Authors: M. A. Leutenegger, M. E. Eckart, S. J. Moseley, S. O. Rohrbach, J. K. Black, M. P. Chiao, R. L. Kelley, C. A. Kilbourne, F. S. Porter

Abstract: X-ray calorimeters routinely achieve very high spectral resolution, typically a few eV full width at half maximum (FWHM). Measurements of calorimeter line shapes are usually dominated by the natural linewidth of most laboratory calibration sources. This compounds the data acquisition time necessary to statistically sample the instrumental line broadening, and can add systematic uncertainty if the… ▽ More X-ray calorimeters routinely achieve very high spectral resolution, typically a few eV full width at half maximum (FWHM). Measurements of calorimeter line shapes are usually dominated by the natural linewidth of most laboratory calibration sources. This compounds the data acquisition time necessary to statistically sample the instrumental line broadening, and can add systematic uncertainty if the intrinsic line shape of the source is not well known. To address these issues, we have built a simple, compact monochromatic x-ray source using channel cut crystals. A commercial x-ray tube illuminates a pair of channel cut crystals which are aligned in a dispersive configuration to select the \kaone line of the x-ray tube anode material. The entire device, including x-ray tube, can be easily hand carried by one person and may be positioned manually or using a mechanical translation stage. The output monochromatic beam provides a collimated image of the anode spot with magnification of unity in the dispersion direction (typically 100-200 $μ$m for the x-ray tubes used here), and is unfocused in the cross-dispersion direction, so that the source image in the detector plane appears as a line. We measured output count rates as high as 10 count/s/pixel for the Hitomi Soft X-ray Spectrometer, which had 819 $μ$m square pixels. We implemented different monochromator designs for energies of 5.4 keV (one design) and 8.0 keV (two designs) which have effective theoretical FWHM energy resolution of 0.125, 0.197, and 0.086 eV, respectively; these are well-suited for optimal calibration measurements of state-of-the art x-ray calorimeters. We measured an upper limit for the energy resolution of our \crkaone monochromator of 0.7 eV FWHM at 5.4 keV, consistent with the theoretical prediction of 0.125 eV. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: 14 pages, 15 figures, accepted for publication in RSI

Learning and correcting non-Gaussian model errors

Authors: Danny Smyl, Tyler N. Tallman, Jonathan A. Black, Andreas Hauptmann, Dong Liu

Abstract: All discretized numerical models contain modelling errors - this reality is amplified when reduced-order models are used. The ability to accurately approximate modelling errors informs statistics on model confidence and improves quantitative results from frameworks using numerical models in prediction, tomography, and signal processing. Further to this, the compensation of highly nonlinear and non… ▽ More All discretized numerical models contain modelling errors - this reality is amplified when reduced-order models are used. The ability to accurately approximate modelling errors informs statistics on model confidence and improves quantitative results from frameworks using numerical models in prediction, tomography, and signal processing. Further to this, the compensation of highly nonlinear and non-Gaussian modelling errors, arising in many ill-conditioned systems aiming to capture complex physics, is a historically difficult task. In this work, we address this challenge by proposing a neural network approach capable of accurately approximating and compensating for such modelling errors in augmented direct and inverse problems. The viability of the approach is demonstrated using simulated and experimental data arising from differing physical direct and inverse problems. △ Less

Submitted 27 January, 2021; v1 submitted 29 May, 2020; originally announced May 2020.

Deep neural networks for efficient phase demodulation in wavelength shifting interferometry

Authors: Jacob Black, Shichao Chen, Joseph G. Thomas, Yizheng Zhu

Abstract: Analytical phase demodulation algorithms in optical interferometry typically fail to reach the theoretical sensitivity limit set by the Cramér-Rao bound (CRB). We show that deep neural networks (DNNs) can perform efficient phase demodulation by achieving or exceeding the CRB by significant margins when trained with new information that is not utilized by conventional algorithms, such as noise stat… ▽ More Analytical phase demodulation algorithms in optical interferometry typically fail to reach the theoretical sensitivity limit set by the Cramér-Rao bound (CRB). We show that deep neural networks (DNNs) can perform efficient phase demodulation by achieving or exceeding the CRB by significant margins when trained with new information that is not utilized by conventional algorithms, such as noise statistics and parameter constraints. As an example, we developed and applied DNNs to wavelength shifting interferometry. When trained with noise statistics, the DNNs outperform the conventional algorithm in terms of phase sensitivity and achieve the traditional three parameter CRB. Further, by incorporating parameter constraints into the training sets, they can exceed the traditional CRB. For well confined parameters, the phase sensitivity of the DNNs can even approach a fundamental limit we refer to as the single parameter CRB. Such sensitivity improvement can translate into significant increase in single-to-noise ratio without hardware modification, or be used to relax hardware requirements. △ Less

Submitted 21 May, 2020; originally announced May 2020.

Comments: 10 pages, 10 figures

Photoelectron track length distributions measured in a negative ion time projection chamber

Authors: Z. R. Prieskorn, J. E. Hill, P. E. Kaaret, J. K. Black

Abstract: We report photoelectron track length distributions between 3 and 8 keV in gas mixtures of Ne+CO2+CH3NO2 (260:80:10 Torr) and CO2+CH3NO2 (197.5: 15 Torr). The measurements were made using a negative ion time projection chamber (NITPC) at the National Synchrotron Light Source (NSLS) at the Brookhaven National Laboratory (BNL). We report the first quantitative analysis of photoelectron track length d… ▽ More We report photoelectron track length distributions between 3 and 8 keV in gas mixtures of Ne+CO2+CH3NO2 (260:80:10 Torr) and CO2+CH3NO2 (197.5: 15 Torr). The measurements were made using a negative ion time projection chamber (NITPC) at the National Synchrotron Light Source (NSLS) at the Brookhaven National Laboratory (BNL). We report the first quantitative analysis of photoelectron track length distributions in a gas. The distribution of track lengths at a given energy is best fit by a lognormal distribution. A powerlaw distribution of the form, f(E)=a(E/Eo)n, is found to fit the relationship between mean track length and energy. We find n=1.29 +/- 0.07 for Ne+CO2+CH3NO2 and n=1.20 +/- 0.09 for CO2+CH3NO2. Understanding the distribution of photoelectron track lengths in proportional counter gases is important for optimizing the pixel size and the dimensions of the active region in electron-drift time projection chambers (TPCs) and NITPC X-ray polarimeters. △ Less

Submitted 17 June, 2014; originally announced June 2014.

Comments: 8 pages, 7 figures, 5 tables. Published in IEEE Transactions on Nuclear Science

Journal ref: 2014, IEEE Transactions on Nuclear Science, vol. 61, pp. 894-900

Mixing times in evolutionary game dynamics

Authors: Andrew J. Black, Arne Traulsen, Tobias Galla

Abstract: Without mutation and migration, evolutionary dynamics ultimately leads to the extinction of all but one species. Such fixation processes are well understood and can be characterized analytically with methods from statistical physics. However, many biological arguments focus on stationary distributions in a mutation-selection equilibrium. Here, we address the equilibration time required to reach st… ▽ More Without mutation and migration, evolutionary dynamics ultimately leads to the extinction of all but one species. Such fixation processes are well understood and can be characterized analytically with methods from statistical physics. However, many biological arguments focus on stationary distributions in a mutation-selection equilibrium. Here, we address the equilibration time required to reach stationarity in the presence of mutation, this is known as the mixing time in the theory of Markov processes. We show that mixing times in evolutionary games have the opposite behaviour from fixation times when the intensity of selection increases: In coordination games with bistabilities, the fixation time decreases, but the mixing time increases. In coexistence games with metastable states, the fixation time increases, but the mixing time decreases. Our results are based on simulations and the WKB approximation of the master equation. △ Less

Submitted 3 April, 2012; originally announced April 2012.

Comments: 5 pages, 3 figures

MyZone: A Next-Generation Online Social Network

Authors: Alireza Mahdian, John Black, Richard Han, Shivakant Mishra

Abstract: This technical report considers the design of a social network that would address the shortcomings of the current ones, and identifies user privacy, security, and service availability as strong motivations that push the architecture of the proposed design to be distributed. We describe our design in detail and identify the property of resiliency as a key objective for the overall design philosophy… ▽ More This technical report considers the design of a social network that would address the shortcomings of the current ones, and identifies user privacy, security, and service availability as strong motivations that push the architecture of the proposed design to be distributed. We describe our design in detail and identify the property of resiliency as a key objective for the overall design philosophy. We define the system goals, threat model, and trust model as part of the system model, and discuss the challenges in adapting such distributed frameworks to become highly available and highly resilient in potentially hostile environments. We propose a distributed solution to address these challenges based on a trust-based friendship model for replicating user profiles and disseminating messages, and examine how this approach builds upon prior work in distributed Peer-to-Peer (P2P) networks. △ Less

Submitted 24 October, 2011; originally announced October 2011.

Report number: CU-CS-1089-11

Gas Gain Measurements from a Negative Ion TPC X-ray Polarimeter

Authors: Z. Prieskorn, J. E. Hill, P. E. Kaaret, J. K. Black, K. Jahoda

Abstract: Gas-based time projection chambers (TPCs) have been shown to be highly sensitive X-ray polarimeters having excellent quantum efficiency while at the same time achieving large modulation factors. To observe polarization of the prompt X-ray emission of a Gamma-ray burst (GRB), a large area detector is needed. Diffusion of the electron cloud in a standard TPC could be prohibitive to measuring good mo… ▽ More Gas-based time projection chambers (TPCs) have been shown to be highly sensitive X-ray polarimeters having excellent quantum efficiency while at the same time achieving large modulation factors. To observe polarization of the prompt X-ray emission of a Gamma-ray burst (GRB), a large area detector is needed. Diffusion of the electron cloud in a standard TPC could be prohibitive to measuring good modulation when the drift distance is large. Therefore, we propose using a negative ion TPC (NITPC) with Nitromethane (CH3NO2) as the electron capture agent. The diffusion of negative ions is reduced over that of electrons due to the thermal coupling of the negative ions to the surrounding gas. This allows for larger area detectors as the drift distance can be increased without degrading polarimeter modulation. Negative ions also travel ~200 times slower than electrons, allowing the readout electronics to operate slower, resulting in a reduction of instrument power. To optimize the NITPC design, we have measured gas gain with SciEnergy gas electron multipliers (GEMs) in single and double GEM configurations. Each setup was tested with different gas combinations, concentrations and pressures: P10 700 Torr, Ne+CO2 700 Torr at varying concentrations of CO2 and Ne+CO2+CH3NO2 700 Torr. We report gain as a function of total voltage, measured from top to bottom of the GEM stack, and as a function of drift field strength for the gas concentrations listed above. Examples of photoelectron tracks at 5.9 keV are also presented. △ Less

Submitted 5 August, 2013; v1 submitted 15 July, 2011; originally announced July 2011.

Comments: 6 pages, 6 figures, accepted for publication in IEEE Trans Nucl Sci

Journal ref: IEEE T NUCL SCI. 2011;58 (4):2055-2059

Generation of Single, Monodisperse Compound Droplets

Authors: James Black, G. Paul Neitzel

Abstract: The generation of single, monodisperse compound droplets is shown in these fluid dynamics videos. In an apparatus designed to produce single compound droplets, a piezoelectric diaphragm generates a pressure pulse from a voltage waveform input to eject a droplet. In the method presented, oil is allowed to flow into the water nozzle with the pressure pulse ejecting both fluids as a compound droplet.… ▽ More The generation of single, monodisperse compound droplets is shown in these fluid dynamics videos. In an apparatus designed to produce single compound droplets, a piezoelectric diaphragm generates a pressure pulse from a voltage waveform input to eject a droplet. In the method presented, oil is allowed to flow into the water nozzle with the pressure pulse ejecting both fluids as a compound droplet. Experiments were performed to demonstrate how changes in water pressure affect compound droplet compositions. It was found that increasing the water pressure decreased the thickness of the compound droplet's oil layer. △ Less

Submitted 13 October, 2010; originally announced October 2010.

Comments: Videos are included in this submission

A benign, low Z electron capture agent for negative ion TPCs

Authors: C. J. Martoff, M. P. Dion, M. Hosack, D. Barton, J. K. Black

Abstract: We have identified nitromethane (CH$_3$NO$_2$) as an effective electron capture agent for negative ion TPCs (NITPCs). We present drift velocity and longitudinal diffusion measurements for negative ion gas mixtures using nitromethane as the capture agent. Not only is nitromethane substantially more benign than the only other identified capture agent, CS$_2$, but its low atomic number will ena… ▽ More We have identified nitromethane (CH$_3$NO$_2$) as an effective electron capture agent for negative ion TPCs (NITPCs). We present drift velocity and longitudinal diffusion measurements for negative ion gas mixtures using nitromethane as the capture agent. Not only is nitromethane substantially more benign than the only other identified capture agent, CS$_2$, but its low atomic number will enable the use of the NITPC as a photoelectric X{}-ray polarimeter in the 1{}-10 keV band. △ Less

Submitted 20 August, 2009; originally announced August 2009.

Journal ref: Nucl.Instrum.Meth.A598:501-504,2009

The imaging X-ray detector for Lobster-ISS

Authors: J. K. Black, A. N. Brunton, N. P. Bannister, P. Deines-Jones, K. Jahoda

Abstract: Lobster-ISS is a revolutionary astrophysical X-ray all-sky monitor scheduled for deployment as an attached payload on the International Space Station (ISS) in 2009. Using a new wide field-of-view focusing optic, Lobster-ISS provides an order-of-magnitude improvement in the sensitivity of all-sky monitors in the soft X-ray band (0.1-3.0 keV). This lobster-eye optic presents unique challenges to t… ▽ More Lobster-ISS is a revolutionary astrophysical X-ray all-sky monitor scheduled for deployment as an attached payload on the International Space Station (ISS) in 2009. Using a new wide field-of-view focusing optic, Lobster-ISS provides an order-of-magnitude improvement in the sensitivity of all-sky monitors in the soft X-ray band (0.1-3.0 keV). This lobster-eye optic presents unique challenges to the imaging X-ray detector at its focus. Micro-patterned imaging proportional counters, with thier mechanical simplicity and high performance, are the most practical means of meeting the requirements. We describe our design for the Lobster-ISS imaging detector based on direct-imaging micro-well proportional counters and the expected performance. △ Less

Submitted 7 May, 2003; originally announced May 2003.

Comments: To be published in NIM A. Presented at the sixth international conference on position sensitive detectors (PSD6)

Journal ref: Nucl.Instrum.Meth. A513 (2003) 123-126

X-ray polarimetry with an active-matrix pixel proportional counter

Authors: J. K. Black, P. Deines-Jones, S. E. Ready, R. A. Street

Abstract: We report the first results from an X-ray polarimeter with a micropattern gas proportional counter using an amorphous silicon active matrix readout. With 100% polarized X-rays at 4.5 keV, we obtain a modulation factor of 0.33 +/- 0.03, confirming previous reports of the high polarization sensitivity of a finely segmented pixel proportional counter. The detector described here has a geometry suit… ▽ More We report the first results from an X-ray polarimeter with a micropattern gas proportional counter using an amorphous silicon active matrix readout. With 100% polarized X-rays at 4.5 keV, we obtain a modulation factor of 0.33 +/- 0.03, confirming previous reports of the high polarization sensitivity of a finely segmented pixel proportional counter. The detector described here has a geometry suitable for the focal plane of an astronomical X-ray telescope. Amorphous silicon readout technology will enable additional extensions and improvements. △ Less

Submitted 27 March, 2003; originally announced March 2003.

Comments: 4 pages, 4 figures, 1 table

Journal ref: Nucl.Instrum.Meth. A513 (2003) 639-643