-
Viscoelastic thin film lubrication in finite width channels
Authors:
Humayun Ahmed,
Luca Biancofiore
Abstract:
Lubricant viscoelasticity arises due to a finite polymer relaxation time ($λ$) and can provide beneficial effects. In applications, such as bearings, gears, biological joints, etc., where the height-to-length ratio is small ($H_0 / \ell_x$) and the shear due to the wall velocity ($U_0$) is high, a simplified two-dimensional computational analysis across the channel length and height reveals a fini…
▽ More
Lubricant viscoelasticity arises due to a finite polymer relaxation time ($λ$) and can provide beneficial effects. In applications, such as bearings, gears, biological joints, etc., where the height-to-length ratio is small ($H_0 / \ell_x$) and the shear due to the wall velocity ($U_0$) is high, a simplified two-dimensional computational analysis across the channel length and height reveals a finite increase in the load carrying capacity of the film purely due to polymer elasticity. In channels with a finite length-to-width ratio, $a$, the spanwise effects can be significant, but the resulting mathematical model is computationally intensive. In this work, we propose simpler reduced-order models, namely via a (i) first-order perturbation in the Deborah number ($λU_0 / H_0$), and the (ii) viscoelastic Reynolds approach extended from \textit{Ahmed, H., \& Biancofiore, L. (2021). A new approach for modeling viscoelastic thin film lubrication. Journal of Non-Newtonian Fluid Mechanics, 292, 104524}. We predict the variation in the net vertical force exerted on the channel walls (for a fixed film height) versus increasing viscoelasticity, and the channel aspect ratio. The models predict an increase in the net force, which is zero for the Newtonian case, versus both the Deborah number and the channel aspect ratio. Interestingly, for a fixed $De$, this force varies strongly between the two limiting cases (i) $a << 1$; an infinitely wide, and (ii) $a >> 1$; an infinitely short channel channel, implying a change in the polymers response. Furthermore, we observe a different trend (i) for a spanwise varying channel, in which a peak is observed between the two limits, and (ii) for a spanwise uniform channel, where the largest load value is for $a << 1$. When $a$ is O($1$), the viscoelastic response varies strongly and spanwise effects cannot be ignored.
△ Less
Submitted 22 October, 2024;
originally announced October 2024.
-
The stability analysis of volatile liquid films in different evaporation regimes
Authors:
Omair A. A. Mohamed,
Luca Biancofiore
Abstract:
We investigate the role of the evaporation regime on the stability of a volatile liquid film flowing over an inclined heated surface while considering the dynamics of both the liquid phase and the diffusion of its vapor. We (i) modify the kinetic-diffusion evaporation model of Sultan et al. [Sultan et al., J. Fluid Mech. 543, 183, (2005)] to allow for the reduction in film thickness caused by evap…
▽ More
We investigate the role of the evaporation regime on the stability of a volatile liquid film flowing over an inclined heated surface while considering the dynamics of both the liquid phase and the diffusion of its vapor. We (i) modify the kinetic-diffusion evaporation model of Sultan et al. [Sultan et al., J. Fluid Mech. 543, 183, (2005)] to allow for the reduction in film thickness caused by evaporative mass loss, (ii) combine it with the liquid film formulation of Joo et al. [Joo et al., J. Fluid Mech. 230, 117, (1991)], and then (iii) utilize long-wave theory to derive a governing equation encapsulating the effects of inertia, hydrostatic pressure, surface tension, thermocapillarity, and evaporation. The system's dispersion relationship reveals that the Marangoni effect has two distinct components. The first results from surface tension gradients driven by the uneven heating of the liquid interface and is always destabilizing, while the second arises from surface tension gradients caused by imbalances in its latent cooling tied to vapor diffusion above it and is either stabilizing or destabilizing depending on the evaporation regime. These two components interact with evaporative mass loss and vapor recoil in a rich and dynamic manner. Moreover, we identify an evaporation regime where the kinetic and diffusion phenomena are precisely balanced and we clarify the dependence of the mass loss instability on the wave number, which we attribute to the presence of a variable vapor gradient above the liquid. Furthermore, we investigate the effect of film thinning on its stability at the two opposing limits of the evaporation regime. Finally, we conduct a spatiotemporal analysis which indicates that the strength of vapor diffusion effects is generally correlated with a shift towards absolute instability, while the thinning of the film can cause convective-to-absolute-to-convective transitions.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Optically Driven Janus Micro Engine with Full Orbital Motion Control
Authors:
David Bronte Ciriza,
Agnese Callegari,
Maria Grazia Donato,
Berk Çiçek,
Alessandro Magazzù,
Iryna Kasianiuk,
Denis Kasianiuk,
Falko Schmidt,
Antonino Foti,
Pietro G. Gucciardi,
Giovanni Volpe,
Maurizio Lanza,
Luca Biancofiore,
Onofrio M. Maragò
Abstract:
Microengines have shown promise for a variety of applications in nanotechnology, microfluidics and nanomedicine, including targeted drug delivery, microscale pumping, and environmental remediation. However, achieving precise control over their dynamics remains a significant challenge. In this study, we introduce a microengine that exploits both optical and thermal effects to achieve a high degree…
▽ More
Microengines have shown promise for a variety of applications in nanotechnology, microfluidics and nanomedicine, including targeted drug delivery, microscale pumping, and environmental remediation. However, achieving precise control over their dynamics remains a significant challenge. In this study, we introduce a microengine that exploits both optical and thermal effects to achieve a high degree of controllability. We find that in the presence of a strongly focused light beam, a gold-silica Janus particle becomes confined at the stationary point where the optical and thermal forces balance. By using circularly polarized light, we can transfer angular momentum to the particle breaking the symmetry between the two forces and resulting in a tangential force that drives directed orbital motion. We can simultaneously control the velocity and direction of rotation of the particle changing the ellipticity of the incoming light beam, while tuning the radius of the orbit with laser power. Our experimental results are validated using a geometrical optics phenomenological model that considers the optical force, the absorption of optical power, and the resulting heating of the particle. The demonstrated enhanced flexibility in the control of microengines opens up new possibilities for their utilization in a wide range of applications, encompassing microscale transport, sensing, and actuation.
△ Less
Submitted 12 July, 2023; v1 submitted 11 May, 2023;
originally announced May 2023.
-
Molecular Rheology of Nanoconfined Polymer Melts
Authors:
Ahmet Burak Yıldırım,
Aykut Erbaş,
Luca Biancofiore
Abstract:
We use non-equilibrium atomistic molecular dynamics simulations of unentangled melts of linear and star polymers ($\mathrm{C_{25}H_{52}}$) to study the steady-state viscoelastic response under confinement within nanoscale hematite $\left ( \mathrm{α-Fe_2O_3} \right )$ channels. We report (i) the negative (positive) first (second) normal stress difference and (ii) the presence of viscoelastic tensi…
▽ More
We use non-equilibrium atomistic molecular dynamics simulations of unentangled melts of linear and star polymers ($\mathrm{C_{25}H_{52}}$) to study the steady-state viscoelastic response under confinement within nanoscale hematite $\left ( \mathrm{α-Fe_2O_3} \right )$ channels. We report (i) the negative (positive) first (second) normal stress difference and (ii) the presence of viscoelastic tension at low shear rates. We link these effects to bond alignment such that chains near the surface can carry the elastic force exerted on the walls, which decays as the chains become more aligned in the flow direction as the shear rate increases.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Motility-induced shear thickening in dense colloidal suspensions
Authors:
A. Gülce Bayram,
Fabian Jan Schwarzendahl,
Hartmut Löwen,
Luca Biancofiore
Abstract:
Phase transitions and collective dynamics of active colloidal suspensions are fascinating topics in soft matter physics, particularly for out-of-equilibrium systems, which can lead to rich rheological behaviours in the presence of steady shear flow. In this article, the role of self-propulsion in the rheological response of a dense colloidal suspension is investigated by using particle-resolved si…
▽ More
Phase transitions and collective dynamics of active colloidal suspensions are fascinating topics in soft matter physics, particularly for out-of-equilibrium systems, which can lead to rich rheological behaviours in the presence of steady shear flow. In this article, the role of self-propulsion in the rheological response of a dense colloidal suspension is investigated by using particle-resolved simulations. First, the interplay between activity and shear in the solid to the liquid transition of the suspension is analysed. While both self-propulsion and shear destroy order and melt the system by themselves above their critical values, self-propulsion lowers the stress barrier that needs to be overcome during the transition. Once the suspension reaches a non-equilibrium steady state the rheological response is analysed. While passive suspensions show a solid-like behaviour, turning on particle motility fluidises the system and, at low self-propulsion, the suspension behaves as a shear-thinning fluid. Increasing the self-propulsion of the colloids induces a transition from a shear-thinning to a shear-thickening behaviour, which we attribute to clustering in the suspensions induced by motility. This interesting phenomenon of motility-induced shear thickening (MIST) can be used to tailor the rheological response of colloidal suspensions.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
The effect of side walls on the stability of falling films
Authors:
Hammam Mohamed,
Jorn Sesterhenn,
Luca Biancofiore
Abstract:
We study the influence of side walls on the stability of falling liquid films. We combine a temporal biglobal stability analysis based on the linearized Navier-Stokes equations with experiments measuring the spatial growth rate of sinusoidal waves flowing downstream an inclined channel. Very good agreement was found when comparing the theoretical and experimental results. Strong lateral confinemen…
▽ More
We study the influence of side walls on the stability of falling liquid films. We combine a temporal biglobal stability analysis based on the linearized Navier-Stokes equations with experiments measuring the spatial growth rate of sinusoidal waves flowing downstream an inclined channel. Very good agreement was found when comparing the theoretical and experimental results. Strong lateral confinement of the channel stabilises the flow. In the wavenumber-Reynolds number space, the instability region experiences a fragmentation due to selective damping of moderate wavenumbers. For this range of parameters, the three dimensional confined problem shows several prominent stability modes which are classified into two categories, the well known Kapitza hydrodynamic instability mode (H-mode), and a new unstable mode, we refer to it as wall-mode (W-mode). The two mode types are stabilised differently, where the H-modes are stabilized at small wavenumbers, while the W-modes experience stabilization at high wavenumbers, and at sufficiently small channel widths, only the W-mode is observed. The reason behind the unique H-modes stabilisation is that they become analogous to waveguide modes, which can not propagate below a certain cut-off wavenumber. The spatial structure of the eigenmodes experiences significant restructuring at wavenumbers smaller than the most damped wavenumber. The mode switching preserves the spatial symmetry of the unstable mode.
△ Less
Submitted 2 March, 2023; v1 submitted 28 July, 2022;
originally announced July 2022.
-
Clustering of Janus Particles in Optical Potential Driven by Hydrodynamic Fluxes
Authors:
S. Masoumeh Mousavi,
Sabareesh K. P. Velu,
Agnese Callegari,
Luca Biancofiore,
Giovanni Volpe
Abstract:
Self-organisation is driven by the interactions between the individual components of a system mediated by the environment, and is one of the most important strategies used by many biological systems to develop complex and functional structures. Furthermore, biologically-inspired self-organisation offers opportunities to develop the next generation of materials and devices for electronics, photonic…
▽ More
Self-organisation is driven by the interactions between the individual components of a system mediated by the environment, and is one of the most important strategies used by many biological systems to develop complex and functional structures. Furthermore, biologically-inspired self-organisation offers opportunities to develop the next generation of materials and devices for electronics, photonics and nanotechnology. In this work, we demonstrate experimentally that a system of Janus particles (silica microspheres half-coated with gold) aggregates into clusters in the presence of a Gaussian optical potential and disaggregates when the optical potential is switched off. We show that the underlying mechanism is the existence of a hydrodynamic flow induced by a temperature gradient generated by the light absorption at the metallic patches on the Janus particles. We also perform simulations, which agree well with the experiments and whose results permit us to clarify the underlying mechanism. The possibility of hydrodynamic-flux-induced reversible clustering may have applications in the fields of drug delivery, cargo transport, bioremediation and biopatterning.
△ Less
Submitted 5 November, 2018;
originally announced November 2018.
-
Linear and nonlinear stability of a quasi-geostrophic mixing layer subject to a uniform background shear
Authors:
Luca Biancofiore,
Orkan M. Umurhan
Abstract:
The aim of this work is to shed light by revisiting - through the kernel-wave (KW) perspective - the breakdown of a quasi-geostrophic (QG) mixing layer (or vortex strip/filament) in atmosphere under the influence of a background shear. The QG mixing layer is modelled with a family of quasi-Rayleigh velocity profiles in which the potential vorticity (PV) is constant in patches. In the KW perspectiv…
▽ More
The aim of this work is to shed light by revisiting - through the kernel-wave (KW) perspective - the breakdown of a quasi-geostrophic (QG) mixing layer (or vortex strip/filament) in atmosphere under the influence of a background shear. The QG mixing layer is modelled with a family of quasi-Rayleigh velocity profiles in which the potential vorticity (PV) is constant in patches. In the KW perspective a counter-propagating Rossby wave (CRW) is created at each PV edge, i.e. the edge where a PV jump is located. The important parameters of our study are (i) the vorticity of the uniform shear m and (ii) the Rossby deformation radius Ld, which indicates how far the pressure perturbations can vertically propagate. While an adverse shear (m < 0) stabilizes the system, a favorable shear (m > 0) strengthens the instability. This is due to how the background shear affects the two uncoupled CRWs by shifting the optimal phase difference towards large (small) wavenumber when m < 0 (m > 0). As the QG environment is introduced a general weakening of the instability is noticed, particularly for m > 0...
△ Less
Submitted 11 September, 2018;
originally announced September 2018.
