Showing 1–29 of 29 results for author: Bhat, H S

Direct Estimation of Earthquake Source Properties from a Single CCTV Camera

Authors: Soumaya Latour, Mathias Lebihain, Harsha S. Bhat, Cédric Twardzik, Quentin Bletery, Kenneth W. Hudnut, François Passelègue

Abstract: We present the first direct measurement of the slip-rate function during a natural coseismic rupture, recorded during the 28 March 2025, Mw 7.7 Mandalay earthquake (Myanmar). This measurement was made on a video footage of the surface rupture captured by a security camera located only meters away from the fault trace. Using direct image analysis, we measured the relative slip at each time step and… ▽ More We present the first direct measurement of the slip-rate function during a natural coseismic rupture, recorded during the 28 March 2025, Mw 7.7 Mandalay earthquake (Myanmar). This measurement was made on a video footage of the surface rupture captured by a security camera located only meters away from the fault trace. Using direct image analysis, we measured the relative slip at each time step and deduced the slip rate. Our results show a local slip duration of 1.3 s, and that the surface slip velocity peaked at nearly 3 m/s during the passage of the slip front, with a cumulative slip of approximately 3 m. These findings demonstrate the pulse-like nature of the seismic rupture, at least at the location of the recording. Using analytical rupture models, we obtain the complete mechanical properties of this pulse including the energy release rate. △ Less

Submitted 23 May, 2025; v1 submitted 21 May, 2025; originally announced May 2025.

From noisy observables to accurate ground state energies: a quantum classical signal subspace approach with denoising

Authors: Hardeep Bassi, Yizhi Shen, Harish S. Bhat, Roel Van Beeumen

Abstract: We propose a hybrid quantum-classical algorithm for ground state energy (GSE) estimation that remains robust to highly noisy data and exhibits low sensitivity to hyperparameter tuning. Our approach -- Fourier Denoising Observable Dynamic Mode Decomposition (FDODMD) -- combines Fourier-based denoising thresholding to suppress spurious noise modes with observable dynamic mode decomposition (ODMD), a… ▽ More We propose a hybrid quantum-classical algorithm for ground state energy (GSE) estimation that remains robust to highly noisy data and exhibits low sensitivity to hyperparameter tuning. Our approach -- Fourier Denoising Observable Dynamic Mode Decomposition (FDODMD) -- combines Fourier-based denoising thresholding to suppress spurious noise modes with observable dynamic mode decomposition (ODMD), a quantum-classical signal subspace method. By applying ODMD to an ensemble of denoised time-domain trajectories, FDODMD reliably estimates the system's eigenfrequencies. We also provide an error analysis of FDODMD. Numerical experiments on molecular systems demonstrate that FDODMD achieves convergence in high-noise regimes inaccessible to baseline methods under a limited quantum computational budget, while accelerating spectral estimation in intermediate-noise regimes. Importantly, this performance gain is entirely classical, requiring no additional quantum overhead and significantly reducing overall quantum resource demands. △ Less

Submitted 15 May, 2025; originally announced May 2025.

FASTDASH: An Implementation of 3D Earthquake Cycle Simulation on Complex Fault Systems Using the Boundary Element Method Accelerated by H-matrices

Authors: Jinhui Cheng, Harsha S. Bhat, Michelle Almakari, Brice Lecampion, Carlo Peruzzo

Abstract: Fault systems have geometrically complex structures in nature, such as stepovers, bends, branches, and roughness. Many geological and geophysical studies have shown that the geometrical complexity of fault systems in nature decisively influences the initiation, arrest, and recurrence of seismic and aseismic events. However, a vast majority of models of slip dynamics are conducted on planar faults… ▽ More Fault systems have geometrically complex structures in nature, such as stepovers, bends, branches, and roughness. Many geological and geophysical studies have shown that the geometrical complexity of fault systems in nature decisively influences the initiation, arrest, and recurrence of seismic and aseismic events. However, a vast majority of models of slip dynamics are conducted on planar faults due to algorithmic limitations. We develop a 3D quasi-dynamic slip dynamics model to overcome this restriction. The calculation of the elastic response due to slip is a matrix-vector multiplication in boundary element method, which can be accelerated by using hierarchical matrices. The computational complexity is reduced from the order of O(N^2) to O(N log N), where N is the number of degree of freedoms used. We validate our code with a static crack analytical solution and the SEAS benchmark/validation exercise from Southern California Earthquake Center. We further employ this method on a realistic fault system with complex geometry that was reactivated during the 2023 Kahramanmaras - Turkiye doublet earthquakes, generating slip sequences that closely match real observations. △ Less

Submitted 26 May, 2025; v1 submitted 5 May, 2025; originally announced May 2025.

Second-Order Adjoint Method for Quantum Optimal Control

Authors: Harish S. Bhat

Abstract: We derive and implement a second-order adjoint method to compute exact gradients and Hessians for a prototypical quantum optimal control problem, that of solving for the minimal energy applied electric field that drives a molecule from a given initial state to a desired target state. For small to moderately sized systems, we demonstrate a vectorized GPU implementation of a second-order adjoint met… ▽ More We derive and implement a second-order adjoint method to compute exact gradients and Hessians for a prototypical quantum optimal control problem, that of solving for the minimal energy applied electric field that drives a molecule from a given initial state to a desired target state. For small to moderately sized systems, we demonstrate a vectorized GPU implementation of a second-order adjoint method that computes both Hessians and gradients with wall times only marginally more than those required to compute gradients via commonly used first-order adjoint methods. Pairing our second-order adjoint method with a trust region optimizer (a type of Newton method), we show that it outperforms a first-order method, requiring significantly fewer iterations and wall time to find optimal controls for four molecular systems. Our derivation of the second-order adjoint method allows for arbitrary parameterizations of the controls. △ Less

Submitted 1 May, 2025; originally announced May 2025.

Comments: 7 pages, 2 figures

Probability of earthquake fault jumps from physics based criterion

Authors: Sylvain Michel, Oona Scotti, Sebastien Hok, Harsha S. Bhat, Navid Kheirdast, Pierre Romanet, Michelle Almakari, Jinhui Cheng

Abstract: Geometrical complexities in natural fault zones, such as steps and gaps, pose a challenge in seismic hazard studies as they can act as barriers to seismic ruptures. In this study, we propose a criterion, which is based on the rate-and-state equation, to estimate the efficiency of an earthquake rupture to jump two spatially disconnected faults. The proposed jump criterion is tested using a 2D quasi… ▽ More Geometrical complexities in natural fault zones, such as steps and gaps, pose a challenge in seismic hazard studies as they can act as barriers to seismic ruptures. In this study, we propose a criterion, which is based on the rate-and-state equation, to estimate the efficiency of an earthquake rupture to jump two spatially disconnected faults. The proposed jump criterion is tested using a 2D quasi-dynamic numerical simulations of the seismic cycle. The criterion successfully predicts fault jumps where the coulomb stress change fails to do so. The criterion includes the coulomb stress change as a parameter but is also dependent on other important parameters among which the absolute normal stress on the fault which the rupture is to jump to. Based on the criterion, the maximum jump distance increases with decreasing absolute normal stress, i.e. as the rupture process occurs closer to the surface or as pore pressure increases. The criterion implies that an earthquake can jump to an infinite distance at the surface if the normal stress is allowed to go to zero. Thus, the properties of the surface layers are of the outmost importance in terms of maximum rupture jump distance allowed. The absolute normal stress is the main controlling parameter followed by the uncertainty on the slip of an earthquake, which controls the coulomb stress impact on the receiver fault. Finally, we also propose a method to compute probabilities of earthquakes rupture to jump, which allows to consider uncertainties in geometrical configurations between two faults. △ Less

Submitted 27 January, 2025; originally announced January 2025.

Volumetric (dilatant) plasticity in geodynamic models and implications on thermal dissipation and strain localization

Authors: Ekeabino Momoh, Harsha S. Bhat, Stephen Tait, Muriel Gerbault

Abstract: Here, we present a new thermomechanical geodynamic, numerical implementation that incorporates Maxwell viscoelastic rheology accounting for temperature-dependent power-law dislocation creep and pressure-sensitive, non-associated Drucker-Prager brittle failure, as well as for volumetric stresses and strains during viscoplastic flow, a departure from the traditional incompressible assumptions. In so… ▽ More Here, we present a new thermomechanical geodynamic, numerical implementation that incorporates Maxwell viscoelastic rheology accounting for temperature-dependent power-law dislocation creep and pressure-sensitive, non-associated Drucker-Prager brittle failure, as well as for volumetric stresses and strains during viscoplastic flow, a departure from the traditional incompressible assumptions. In solving for energy conservation, we incorporate the heat source term resulting from irreversible mechanical deformations, which embodies viscoelastic and viscoplastic work, and by considering the total stress tensor and total inelastic strain rate tensors, including dilatant plasticity effects for lithospheric-scale applications, instead of only the shear terms as is usually assumed for incompressible materials. This form of the work term thus allows to consider, volumetric deformation and to couple the energy equation to the constitutive description, and hence the stress balance, via the evolving temperature field. Code design enables us to switch individual features of this general rheology ``on or off'' and thus to benchmark this implementation with published numerical experiments of crustal-scale shortening experiments. We investigate whether ``brittle-plastic'' compressibility can promote or inhibit localization of deformation and thermal evolution during compression for crustal, and upper mantle rheology. For both crustal-scale and lithospheric-scale experiments, we establish that the feedback from volumetric dissipation, while contributing to temperature increase along with shear dissipation, can potentially slow down heat production per unit time, depending on the choice of boundary conditions. Our new implementation can be used to address buckling problems and collision tectonics. △ Less

Submitted 6 December, 2024; originally announced December 2024.

Nonlinear Optimal Control of Electron Dynamics within Hartree-Fock Theory

Authors: Harish S. Bhat, Hardeep Bassi, Christine M. Isborn

Abstract: Consider the problem of determining the optimal applied electric field to drive a molecule from an initial state to a desired target state. For even moderately sized molecules, solving this problem directly using the exact equations of motion -- the time-dependent Schrödinger equation (TDSE) -- is numerically intractable. We present a solution of this problem within time-dependent Hartree-Fock (TD… ▽ More Consider the problem of determining the optimal applied electric field to drive a molecule from an initial state to a desired target state. For even moderately sized molecules, solving this problem directly using the exact equations of motion -- the time-dependent Schrödinger equation (TDSE) -- is numerically intractable. We present a solution of this problem within time-dependent Hartree-Fock (TDHF) theory, a mean field approximation of the TDSE. Optimality is defined in terms of minimizing the total control effort while maximizing the overlap between desired and achieved target states. We frame this problem as an optimization problem constrained by the nonlinear TDHF equations; we solve it using trust region optimization with gradients computed via a custom-built adjoint state method. For three molecular systems, we show that with very small neural network parametrizations of the control, our method yields solutions that achieve desired targets within acceptable constraints and tolerances. △ Less

Submitted 4 December, 2024; originally announced December 2024.

Comments: 8 pages, 2 figures

MSC Class: 49N90; 81V70; 68T07

Scalable learning of potentials to predict time-dependent Hartree-Fock dynamics

Authors: Harish S. Bhat, Prachi Gupta, Christine M. Isborn

Abstract: We propose a framework to learn the time-dependent Hartree-Fock (TDHF) inter-electronic potential of a molecule from its electron density dynamics. Though the entire TDHF Hamiltonian, including the inter-electronic potential, can be computed from first principles, we use this problem as a testbed to develop strategies that can be applied to learn a priori unknown terms that arise in other methods/… ▽ More We propose a framework to learn the time-dependent Hartree-Fock (TDHF) inter-electronic potential of a molecule from its electron density dynamics. Though the entire TDHF Hamiltonian, including the inter-electronic potential, can be computed from first principles, we use this problem as a testbed to develop strategies that can be applied to learn a priori unknown terms that arise in other methods/approaches to quantum dynamics, e.g., emerging problems such as learning exchange-correlation potentials for time-dependent density functional theory. We develop, train, and test three models of the TDHF inter-electronic potential, each parameterized by a four-index tensor of size up to $60 \times 60 \times 60 \times 60$. Two of the models preserve Hermitian symmetry, while one model preserves an eight-fold permutation symmetry that implies Hermitian symmetry. Across seven different molecular systems, we find that accounting for the deeper eight-fold symmetry leads to the best-performing model across three metrics: training efficiency, test set predictive power, and direct comparison of true and learned inter-electronic potentials. All three models, when trained on ensembles of field-free trajectories, generate accurate electron dynamics predictions even in a field-on regime that lies outside the training set. To enable our models to scale to large molecular systems, we derive expressions for Jacobian-vector products that enable iterative, matrix-free training. △ Less

Submitted 3 December, 2024; v1 submitted 8 August, 2024; originally announced August 2024.

Comments: 25 pages, 8 figures

Depth Dependence of Coseismic Off-Fault Damage and its Effects on Rupture Dynamics

Authors: Roxane Ferry, Marion Y. Thomas, Harsha S. Bhat, Pierpaolo Dubernet

Abstract: Faults are complex systems embedded in an evolving medium fractured by seismic ruptures. This off-fault damage zone is shown to be thermo-hydro-mechano-chemically coupled to the main fault plane by a growing number of studies. Yet, off-fault medium is still, for the most part, modelled as a purely elastic -- hence passive -- medium. Using a micromechanical model that accounts for dynamic changes o… ▽ More Faults are complex systems embedded in an evolving medium fractured by seismic ruptures. This off-fault damage zone is shown to be thermo-hydro-mechano-chemically coupled to the main fault plane by a growing number of studies. Yet, off-fault medium is still, for the most part, modelled as a purely elastic -- hence passive -- medium. Using a micromechanical model that accounts for dynamic changes of elastic moduli and inelastic strains related to crack growth, we investigate the depth variation of dynamically triggered off-fault damage and its counter-impact on earthquake slip dynamics. We show that the damage zone, while narrowing with depth, also becomes denser and contrary to prevailing assumptions continues to act as an energy sink, significantly influencing rupture dynamics by stabilizing slip rates. Furthermore, we observe that damage formation markedly reduces rupture velocity and delays, or even prevents, the transition to supershear speeds even for a narrow damage zone. This underscores the critical need to incorporate the complex interplay between the main fault plane and its surrounding medium across the entire seismogenic zone. As a proof of concept, we introduce a 1D spring-slider model that captures bulk elastic variations, by modulating spring stiffness, and normal stress variations that emulate changes in bulk load. This simple model demonstrates the occurrence of slow slip events alongside conventional earthquakes, driven by the dynamic interaction between bulk temporal evolution and fault slip dynamics, without necessitating any changes to frictional properties. △ Less

Submitted 21 October, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Incorporating Memory into Propagation of 1-Electron Reduced Density Matrices

Authors: Harish S. Bhat, Hardeep Bassi, Karnamohit Ranka, Christine M. Isborn

Abstract: For any linear system with unreduced dynamics governed by invertible propagators, we derive a closed, time-delayed, linear system for a reduced-dimensional quantity of interest. This method does not target dimensionality reduction: rather, this method helps shed light on the memory-dependence of $1$-electron reduced density matrices in time-dependent configuration interaction (TDCI), a scheme to s… ▽ More For any linear system with unreduced dynamics governed by invertible propagators, we derive a closed, time-delayed, linear system for a reduced-dimensional quantity of interest. This method does not target dimensionality reduction: rather, this method helps shed light on the memory-dependence of $1$-electron reduced density matrices in time-dependent configuration interaction (TDCI), a scheme to solve for the correlated dynamics of electrons in molecules. Though time-dependent density functional theory has established that the $1$-electron reduced density possesses memory-dependence, the precise nature of this memory-dependence has not been understood. We derive a symmetry/constraint-preserving method to propagate reduced TDCI electron density matrices. In numerical tests on two model systems ($\text{H}_2$ and $\text{HeH}^+$), we show that with sufficiently large time-delay (or memory-dependence), our method propagates reduced TDCI density matrices with high quantitative accuracy. We study the dependence of our results on time step and basis set. To implement our method, we derive the $4$-index tensor that relates reduced and full TDCI density matrices. Our derivation applies to any TDCI system, regardless of basis set, number of electrons, or choice of Slater determinants in the wave function. △ Less

Submitted 4 December, 2024; v1 submitted 22 March, 2024; originally announced March 2024.

Comments: 35 pages, 7 figures

MSC Class: 81V55; 34K06; 81S22; 37N20

A brittle constitutive law for long-term tectonic modeling based on sub-critical crack growth

Authors: Léo Petit, Jean-Arthur Olive, Alexandre Schubnel, Laetitia Le Pourhiet, Harsha S. Bhat

Abstract: Adequate representations of brittle deformation (fracturing and faulting) are essential ingredients of long term tectonic simulations. Such models commonly rely on Mohr Coulomb plasticity coupled with prescribed softening of cohesion and/or friction with accumulated plastic strain. This approach captures fundamental properties of brittle failure, but is overly sensitive to empirical softening para… ▽ More Adequate representations of brittle deformation (fracturing and faulting) are essential ingredients of long term tectonic simulations. Such models commonly rely on Mohr Coulomb plasticity coupled with prescribed softening of cohesion and/or friction with accumulated plastic strain. This approach captures fundamental properties of brittle failure, but is overly sensitive to empirical softening parameters that cannot be determined experimentally. Here we design a brittle constitutive law that captures key processes of brittle deformation, and can be straightforwardly implemented in standard geodynamic models. In our Sub Critically Altered Maxwell (SCAM) flow law, brittle failure begins with the accumulation of distributed brittle damage, which represents the sub critical lengthening of tensile micro cracks prompted by slip on pre existing shear defects. Damage progressively and permanently weakens the rock's elastic moduli, until cracks catastrophically interact and coalesce up to macroscopic failure. The model's micromechanical parameters can be fully calibrated against rock deformation experiments, alleviating the need for ad hoc softening parameters. Upon implementing the SCAM flow law in 2 D plane strain simulations of rock deformation experiments, we find that it can produce Coulomb oriented shear bands which originate as damage bands. SCAM models can also be used to extrapolate rock strength from laboratory to tectonic strain rates, and nuance the use of Byerlee's law as an upper bound on lithosphere stresses. We further show that SCAM models can be upscaled to simulate tectonic deformation of a 10 km thick brittle plate over millions of years. These features make the SCAM rheology a promising tool to further investigate the complexity of brittle behavior across scales. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Friction Laws and Numerical Modeling of the Seismic Cycle

Authors: M. Y. Thomas, H. S. Bhat

Abstract: Earthquakes rank among the most destructive manifestations of the Earth's dynamics. Can they be predicted? This is often the first question students ask. To answer that right away: no, at present it is not possible to anticipate the date, site and magnitude of future seismic events. However, there does exist a general framework to describe observations related to earthquakes and understand the pro… ▽ More Earthquakes rank among the most destructive manifestations of the Earth's dynamics. Can they be predicted? This is often the first question students ask. To answer that right away: no, at present it is not possible to anticipate the date, site and magnitude of future seismic events. However, there does exist a general framework to describe observations related to earthquakes and understand the processes that lead to their occurrence: the seismic cycle. This chapter introduces the reader to the friction laws from a historical to state of the art perspective. It then deals with mechanical modelling of the seismic cycle through simple analog models and finally presents some open questions and directions for future research. △ Less

Submitted 3 January, 2023; originally announced January 2023.

On the importance of 3D stress state in 2D earthquake rupture simulations with off-fault deformation

Authors: Louise Jeandet Ribes, Marion Y. Thomas, Harsha S. Bhat

Abstract: During the last decades, many numerical models have been developed to investigate the conditions for seismic and aseismic slip. Those models explore the behavior of frictional faults, embedded in either elastic or inelastic media, and submitted to a far field loading (seismic cycle models), or initial stresses (single dynamic rupture models). Those initial conditions impact both on-fault and off-f… ▽ More During the last decades, many numerical models have been developed to investigate the conditions for seismic and aseismic slip. Those models explore the behavior of frictional faults, embedded in either elastic or inelastic media, and submitted to a far field loading (seismic cycle models), or initial stresses (single dynamic rupture models). Those initial conditions impact both on-fault and off-fault dynamics. Because of the sparsity of direct measurements of fault stresses, modelers have to make assumptions about these initial conditions. To this day, Anderson's theory is the only framework that can be used to link fault generation and reactivation to the three-dimensional stress field. In this work we look at the role of the three dimensional stress field in modelling a 2D strike-slip fault under plane-strain conditions. We show that setting up an incorrect initial stress field, based on Anderson's theory, can lead to underestimation of the damage zone width by up to a factor of six, for the studied cases. Moreover, because of the interactions between fault slip and off-fault deformation, initial stress field influences the rupture propagation. Our study emphasizes the need to set up the correct initial 3D stress field, even in 2D numerical simulations. △ Less

Submitted 18 October, 2023; v1 submitted 24 December, 2022; originally announced December 2022.

Elasto-thermo-visco-plastic numerical modelling from a laboratory to geodynamic scale: implications for convergence-driven experiments

Authors: Ekeabino Momoh, Harsha S. Bhat, Steve Tait

Abstract: The development of a subduction zone, whether spontaneous or induced, encompasses a stage of strain localization and is epitomized by the growth of lithospheric-scale shear bands. Our aim in this paper, using a solid-mechanical constitutive description relevant for oceanic lithosphere, is to investigate factors that promote or inhibit localization of deformation in brittle and ductile regimes in c… ▽ More The development of a subduction zone, whether spontaneous or induced, encompasses a stage of strain localization and is epitomized by the growth of lithospheric-scale shear bands. Our aim in this paper, using a solid-mechanical constitutive description relevant for oceanic lithosphere, is to investigate factors that promote or inhibit localization of deformation in brittle and ductile regimes in convergence-driven numerical experiments. We used the Drucker-Prager yield criterion and a non-associative flow rule, allowing viscoplastic deformation to take directions independent of the preferred direction of yield. We present a step-by-step description of the constitutive law and the consistent algorithmic tangent modulus. The model domain contains an initial weak-zone on which localization can potentially nucleate. In solving the energy conservation problem, we incorporate a heat source term from the mechanical deformations which embodies the irreversible plastic work done. This work term couples the energy equation to the constitutive description, and hence hence the stress balance, via the evolving temperature field. On a sample-scale, we first conduct a series of isothermal benchmark tests. We then explore behavior including shear heating and volumetric work both separately and in concert. and thereby address the (in)significance of the latter, and hence assess their potential importance. We find that dilatational effects mostly enhance both shear band development and shear heating. We also observe that high temperature promotes shear band development whereas high confining pressure inhibits it, and infer that the competition between these factors is likely to be the major influence on the position within the lithosphere where shear bands nucleate. △ Less

Submitted 24 December, 2022; originally announced December 2022.

Dynamic Learning of Correlation Potentials for a Time-Dependent Kohn-Sham System

Authors: Harish S. Bhat, Kevin Collins, Prachi Gupta, Christine M. Isborn

Abstract: We develop methods to learn the correlation potential for a time-dependent Kohn-Sham (TDKS) system in one spatial dimension. We start from a low-dimensional two-electron system for which we can numerically solve the time-dependent Schrödinger equation; this yields electron densities suitable for training models of the correlation potential. We frame the learning problem as one of optimizing a leas… ▽ More We develop methods to learn the correlation potential for a time-dependent Kohn-Sham (TDKS) system in one spatial dimension. We start from a low-dimensional two-electron system for which we can numerically solve the time-dependent Schrödinger equation; this yields electron densities suitable for training models of the correlation potential. We frame the learning problem as one of optimizing a least-squares objective subject to the constraint that the dynamics obey the TDKS equation. Applying adjoints, we develop efficient methods to compute gradients and thereby learn models of the correlation potential. Our results show that it is possible to learn values of the correlation potential such that the resulting electron densities match ground truth densities. We also show how to learn correlation potential functionals with memory, demonstrating one such model that yields reasonable results for trajectories outside the training set. △ Less

Submitted 6 December, 2022; v1 submitted 13 December, 2021; originally announced December 2021.

Comments: 20 pages, 5 figures

Journal ref: Proceedings of The 4th Annual Learning for Dynamics and Control Conference, PMLR 168:546-558, 2022

Statistical learning method for predicting density-matrix based electron dynamics

Authors: Prachi Gupta, Harish S. Bhat, Karnamohit Ranka, Christine M. Isborn

Abstract: We develop a statistical method to learn a molecular Hamiltonian matrix from a time-series of electron density matrices. We extend our previous method to larger molecular systems by incorporating physical properties to reduce dimensionality, while also exploiting regularization techniques like ridge regression for addressing multicollinearity. With the learned Hamiltonian we can solve the Time-Dep… ▽ More We develop a statistical method to learn a molecular Hamiltonian matrix from a time-series of electron density matrices. We extend our previous method to larger molecular systems by incorporating physical properties to reduce dimensionality, while also exploiting regularization techniques like ridge regression for addressing multicollinearity. With the learned Hamiltonian we can solve the Time-Dependent Hartree-Fock (TDHF) equation to propagate the electron density in time, and predict its dynamics for field-free and field-on scenarios. We observe close quantitative agreement between the predicted dynamics and ground truth for both field-off trajectories similar to the training data, and field-on trajectories outside of the training data. △ Less

Submitted 31 July, 2021; originally announced August 2021.

Nucleation of laboratory earthquakes: quantitative analysis and scalings

Authors: S. Marty, H. S. Bhat, J. Aubry, E. Fukuyama, S. Latour, S. Nielsen, R. Madariaga, A. Schubnel

Abstract: Decades of seismological observations have highlighted the variability of foreshock occurrence prior to natural earthquakes, making thus difficult to track how earthquakes start. Here, we report on three stick-slip experiments performed on cylindrical samples of Indian metagabbro under upper crustal stress conditions (30-60 $MPa$). Acoustic emissions (AEs) were continuously recorded by 8 calibrate… ▽ More Decades of seismological observations have highlighted the variability of foreshock occurrence prior to natural earthquakes, making thus difficult to track how earthquakes start. Here, we report on three stick-slip experiments performed on cylindrical samples of Indian metagabbro under upper crustal stress conditions (30-60 $MPa$). Acoustic emissions (AEs) were continuously recorded by 8 calibrated acoustic sensors during the experiments. Seismological parameters (moment magnitude, corner frequency and stress-drop) of the detected AEs ($-8.8 \leq Mw \leq -7 $) follow the scaling law between moment magnitude and corner frequency that characterizes natural earthquakes. AE activity always increases towards failure and is found to be driven by along fault slip velocity. Consistently for all three experiments, the stacked AE foreshock sequences follow an inverse power-law of the time to failure (inverse Omori), with a characteristic Omori time $c$ inversely proportional to normal stress. AEs moment magnitudes increase towards failure, as manifested by a decrease in b-value from $\sim 1$ to $\sim 0.5$ at the end of the nucleation process. During nucleation, the averaged distance of foreshocks to mainshock also continuously decreases, highlighting the fast migration of foreshocks towards the mainshock epicenter location, and stabilizing at a distance from the latter compatible with the predicted Rate-and-State nucleation size. Importantly, we also show that the nucleation characteristic timescale scales inversely with applied normal stress and the expected nucleation size. Finally, the seismic component of the nucleation phase is orders of magnitude smaller than that of its aseismic component, which suggests that, in this experimental setting at least, foreshocks are the byproducts of a process almost fully aseismic. △ Less

Submitted 24 December, 2022; v1 submitted 10 May, 2021; originally announced May 2021.

Machine Learning a Molecular Hamiltonian for Predicting Electron Dynamics

Authors: Harish S. Bhat, Karnamohit Ranka, Christine M. Isborn

Abstract: We develop a computational method to learn a molecular Hamiltonian matrix from matrix-valued time series of the electron density. As we demonstrate for three small molecules, the resulting Hamiltonians can be used for electron density evolution, producing highly accurate results even when propagating 1000 time steps beyond the training data. As a more rigorous test, we use the learned Hamiltonians… ▽ More We develop a computational method to learn a molecular Hamiltonian matrix from matrix-valued time series of the electron density. As we demonstrate for three small molecules, the resulting Hamiltonians can be used for electron density evolution, producing highly accurate results even when propagating 1000 time steps beyond the training data. As a more rigorous test, we use the learned Hamiltonians to simulate electron dynamics in the presence of an applied electric field, extrapolating to a problem that is beyond the field-free training data. We find that the resulting electron dynamics predicted by our learned Hamiltonian are in close quantitative agreement with the ground truth. Our method relies on combining a reduced-dimensional, linear statistical model of the Hamiltonian with a time-discretization of the quantum Liouville equation within time-dependent Hartree Fock theory. We train the model using a least-squares solver, avoiding numerous, CPU-intensive optimization steps. For both field-free and field-on problems, we quantify training and propagation errors, highlighting areas for future development. △ Less

Submitted 31 August, 2020; v1 submitted 19 July, 2020; originally announced July 2020.

The Impact of Large Erosional Events and Transient Normal Stress Changes on the Seismicity of Faults

Authors: L. Jeandet Ribes, N. Cubas, H. S. Bhat, P. Steer

Abstract: The long-term erosion of steep landscapes is punctuated by dramatic erosional events that can remove significant amount of sediments within a time-scale shorter than a seismic cycle. However, the role of such large erosional events on seismicity is poorly understood. We use QDYN, a quasi-dynamic numerical model of earthquake cycles to investigate the effect of a large erosional event on seismicity… ▽ More The long-term erosion of steep landscapes is punctuated by dramatic erosional events that can remove significant amount of sediments within a time-scale shorter than a seismic cycle. However, the role of such large erosional events on seismicity is poorly understood. We use QDYN, a quasi-dynamic numerical model of earthquake cycles to investigate the effect of a large erosional event on seismicity. The progressive evacuation of landslide sediments is modelled by a transient normal stress decrease. We show that erosional events with a shorter duration compared with the duration of a seismic cycle can significantly increase the seismicity rate, even for small stress changes. Moreover, large erosional events with a shorter period compared with the earthquake nucleation time-scale can change earthquake size distribution by triggering more small events. Those results suggest that large erosional events can significantly affect seismicity, illustrating in turn the short-term impact of surface processes on tectonics. △ Less

Submitted 23 September, 2020; v1 submitted 13 July, 2020; originally announced July 2020.

Modeling earthquakes with off-fault damage using the combined finite-discrete element method

Authors: Kurama Okubo, Esteban Rougier, Zhou Lei, Harsha S. Bhat

Abstract: When a dynamic earthquake rupture propagates on a fault in the Earth's crust, the medium around the fault is dynamically damaged due to stress concentrations around the rupture tip. Recent field observations, laboratory experiments and canonical numerical models show the coseismic off-fault damage is essential to describe the coseismic off-fault deformation, rupture dynamics, radiation and overall… ▽ More When a dynamic earthquake rupture propagates on a fault in the Earth's crust, the medium around the fault is dynamically damaged due to stress concentrations around the rupture tip. Recent field observations, laboratory experiments and canonical numerical models show the coseismic off-fault damage is essential to describe the coseismic off-fault deformation, rupture dynamics, radiation and overall energy budget. However, the numerical modeling of "localized" off-fault fractures remains a challenge mainly because of computational limitations and model formulation shortcomings. We thus developed a numerical framework for modeling coseismic off-fault fracture networks using the combined finite-discrete element method (FDEM) and we applied it to simulate dynamic ruptures with coseismic off-fault damage on various fault configurations. This paper addresses the role of coseismic off-fault damage on rupture dynamics associated with a planar fault, as a base case, and with a number of first-order geometrical complexities, such as fault kink, step-over and roughness. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Comments: arXiv admin note: text overlap with arXiv:1901.01771

Supershear shock front contribution to the tsunami from the 2018 $\mathbf M_{\mathbf w}$ 7.5 Palu, Indonesia earthquake

Authors: Faisal Amlani, Harsha S. Bhat, Wim J. F. Simons, Alexandre Schubnel, Christophe Vigny, Ares J. Rosakis, Joni Efendi, Ahmed Elbanna, Pierpaolo Dubernet, Hasanuddin Z. Abidin

Abstract: Hazardous tsunamis are known to be generated predominantly at subduction zones. However, the 2018 Mw 7.5 Sulawesi (Indonesia) earthquake on a strike-slip fault generated a tsunami that devastated the city of Palu. The mechanism by which this tsunami originated from such an earthquake has been debated. Here we present near-field ground motion (GPS) data confirming that the earthquake attained super… ▽ More Hazardous tsunamis are known to be generated predominantly at subduction zones. However, the 2018 Mw 7.5 Sulawesi (Indonesia) earthquake on a strike-slip fault generated a tsunami that devastated the city of Palu. The mechanism by which this tsunami originated from such an earthquake has been debated. Here we present near-field ground motion (GPS) data confirming that the earthquake attained supershear speed, i.e., a rupture speed greater than the shear wave speed of the host medium. We study the effect of this supershear rupture on tsunami generation by coupling the ground motion to a one-dimensional nonlinear shallow-water wave model accounting for both time-dependent bathymetric displacement and velocity. With the local bathymetric profile of Palu bay around a tidal station, our simulations reproduce the tsunami arrival and motions observed by CCTV cameras. We conclude that Mach (shock) fronts, generated by the supershear speed, interacted with the bathymetry and contributed to the tsunami. △ Less

Submitted 26 February, 2022; v1 submitted 31 October, 2019; originally announced October 2019.

Signature of transition to supershear rupture speed in coseismic off-fault damage zone

Authors: Jorge Jara, Lucile Bruhat, Marion Y. Thomas, Solène Antoine, Kurama Okubo, Esteban Rougier, Ares J. Rosakis, Charles G. Sammis, Yann Klinger, Romain Jolivet, Harsha S. Bhat

Abstract: Most earthquake ruptures propagate at speeds below the shear wave velocity within the crust, but in some rare cases, ruptures reach supershear speeds. The physics underlying the transition of natural subshear earthquakes to supershear ones is currently not fully understood. Most observational studies of supershear earthquakes have focused on determining which fault segments sustain fully-grown sup… ▽ More Most earthquake ruptures propagate at speeds below the shear wave velocity within the crust, but in some rare cases, ruptures reach supershear speeds. The physics underlying the transition of natural subshear earthquakes to supershear ones is currently not fully understood. Most observational studies of supershear earthquakes have focused on determining which fault segments sustain fully-grown supershear ruptures. Experimentally cross-validated numerical models have identified some of the key ingredients required to trigger a transition to supershear speed. However, the conditions for such a transition in nature are still unclear, including the precise location of this transition. In this work, we provide theoretical and numerical insights to identify the precise location of such a transition in nature. We use fracture mechanics arguments with multiple numerical models to identify the signature of supershear transition in coseismic off-fault damage. We then cross-validate this signature with high-resolution observations of fault zone width and early aftershock distributions. We confirm that the location of the transition from subshear to supershear speed is characterized by a decrease in the width of the coseismic off-fault damage zone. We thus help refine the precise location of such a transition for natural supershear earthquakes. △ Less

Submitted 18 October, 2021; v1 submitted 27 September, 2019; originally announced September 2019.

Learning and Interpreting Potentials for Classical Hamiltonian Systems

Authors: Harish S. Bhat

Abstract: We consider the problem of learning an interpretable potential energy function from a Hamiltonian system's trajectories. We address this problem for classical, separable Hamiltonian systems. Our approach first constructs a neural network model of the potential and then applies an equation discovery technique to extract from the neural potential a closed-form algebraic expression. We demonstrate th… ▽ More We consider the problem of learning an interpretable potential energy function from a Hamiltonian system's trajectories. We address this problem for classical, separable Hamiltonian systems. Our approach first constructs a neural network model of the potential and then applies an equation discovery technique to extract from the neural potential a closed-form algebraic expression. We demonstrate this approach for several systems, including oscillators, a central force problem, and a problem of two charged particles in a classical Coulomb potential. Through these test problems, we show close agreement between learned neural potentials, the interpreted potentials we obtain after training, and the ground truth. In particular, for the central force problem, we show that our approach learns the correct effective potential, a reduced-order model of the system. △ Less

Submitted 26 July, 2019; originally announced July 2019.

Comments: 12 pages

Dynamics, radiation and overall energy budget of earthquake rupture with coseismic off-fault damage

Authors: Kurama Okubo, Harsha S. Bhat, Esteban Rougier, Samson Marty, Alexandre Schubnel, Zhou Lei, Earl E. Knight, Yann Klinger

Abstract: Earthquake ruptures dynamically activate coseismic off-fault damage around fault cores. Systematic field observation efforts have shown the distribution of off-fault damage around main faults, while numerical modeling using elastic-plastic off-fault material models has demonstrated the evolution of coseismic off-fault damage during earthquake ruptures. Laboratory scale micro-earthquake experiments… ▽ More Earthquake ruptures dynamically activate coseismic off-fault damage around fault cores. Systematic field observation efforts have shown the distribution of off-fault damage around main faults, while numerical modeling using elastic-plastic off-fault material models has demonstrated the evolution of coseismic off-fault damage during earthquake ruptures. Laboratory scale micro-earthquake experiments have pointed out the enhanced high-frequency radiation due to the coseismic off-fault damage. However, the detailed off-fault fracturing mechanisms, subsequent radiation and its contribution to the overall energy budget remain to be fully understood because of limitations of current observational techniques and model formulations. Here, we constructed a new physics-based dynamic earthquake rupture modeling framework, based on the combined finite-discrete element method (FDEM), to investigate the fundamental mechanisms of coseismic off-fault damage, and its effect on the rupture dynamics, the radiation and the overall energy budget. We conducted a 2-D systematic case study with depth and showed the mechanisms of dynamic activation of the coseismic off-fault damage. We found the decrease in rupture velocity and the enhanced high-frequency radiation in near-field due to the coseismic off-fault damage. We then evaluated the overall energy budget, which shows a significant contribution of the coseismic off-fault damage to the overall energy budget even at depth, where the damage zone width becomes narrower. The present numerical framework for the dynamic earthquake rupture modeling thus provides the insight into the earthquake rupture dynamics with the coseismic off-fault damage. △ Less

Submitted 23 April, 2019; v1 submitted 7 January, 2019; originally announced January 2019.

On the origin of thigh-frequency radiation in experimental earthquakes

Authors: S. Marty, F. X. Passelègue, J. Aubry, H. S. Bhat, A. Schubnel, R. Madariaga

Abstract: We monitor dynamic rupture propagation during laboratory stick-slip experiments performed on saw-cut Westerly granite under upper crustal conditions (10-90 MPa). Spectral analysis of high-frequency acoustic waveforms provided evidence that energy radiation is enhanced with stress conditions and rupture velocity. Using acoustic recordings bandpass filtered to 400-800 kHz (7-14 mm wavelength) and hi… ▽ More We monitor dynamic rupture propagation during laboratory stick-slip experiments performed on saw-cut Westerly granite under upper crustal conditions (10-90 MPa). Spectral analysis of high-frequency acoustic waveforms provided evidence that energy radiation is enhanced with stress conditions and rupture velocity. Using acoustic recordings bandpass filtered to 400-800 kHz (7-14 mm wavelength) and highpass filtered above 800 kHz, we back projected high-frequency energy generated during rupture propagation. Our results show that the high-frequency radiation originates behind the rupture front during propagation and propagates at a speed close to that obtained by our rupture velocity inversion. From scaling arguments, we suggest that the origin of high-frequency radiation lies in the fast dynamic stress-drop in the breakdown zone together with off-fault co-seismic damage propagating behind the rupture tip. The application of the back-projection method at the laboratory scale provides new ways to locally investigate physical mechanisms that control high-frequency radiation. △ Less

Submitted 12 March, 2019; v1 submitted 4 January, 2019; originally announced January 2019.

Frictional heating processes and energy budget during laboratory earthquakes

Authors: J. Aubry, F. X. Passelègue, D. Deldicque, F. Girault, S. Marty, A. Lahfid, H. S. Bhat, J. Escartin, A. Schubnel

Abstract: During an earthquake, part of the released elastic strain energy is dissipated within the slip zone by frictional and fracturing processes, the rest being radiated away via elastic waves. Frictional heating thus plays a crucial role in the energy budget of earthquakes, but, to date, it cannot be resolved by seismological data. Here we investigate the dynamics of laboratory earthquakes by measuring… ▽ More During an earthquake, part of the released elastic strain energy is dissipated within the slip zone by frictional and fracturing processes, the rest being radiated away via elastic waves. Frictional heating thus plays a crucial role in the energy budget of earthquakes, but, to date, it cannot be resolved by seismological data. Here we investigate the dynamics of laboratory earthquakes by measuring frictional heat dissipated during the propagation of shear instabilities at typical seismogenic depth stress conditions. We perform, for the first time, the full energy budget of earthquake rupture and demonstrate that increasing the radiation efficiency, i.e. the ratio of energy radiated away via elastic waves compared to that dissipated locally, increases with increasing thermal - frictional - weakening. Using an in-situ carbon thermometer, we map frictional heating temperature heterogeneities - 'heat' asperities - on the fault surface. Combining our microstructural, temperature and mechanical observations, we show that an increase in fault strength corresponds to a transition from a weak fault with multiple strong asperities, but little overall radiation, to a highly radiative fault, which behaves as a single strong asperity. △ Less

Submitted 4 June, 2018; originally announced June 2018.

Comments: 33 pages

Earthquake damage patterns resolve complex rupture processes

Authors: Yann Klinger, Kurama Okubo, Amaury Vallage, Johann Champenois, Arthur Delorme, Esteban Rougier, Zhou Lei, Earl E. Knight, Antonio Munjiza, Stephane Baize, Robert Langridge, Harsha S. Bhat

Abstract: Large continental earthquakes activate multiple faults in a complex fault system, dynamically inducing co-seismic damage around them. The 2016 Mw 7.8 Kaikoura earthquake in the northern South Island of New Zealand has been reported as one of the most complex continental earthquakes ever documented1, which resulted in a distinctive on and off-fault deformation pattern. Previous geophysical studies… ▽ More Large continental earthquakes activate multiple faults in a complex fault system, dynamically inducing co-seismic damage around them. The 2016 Mw 7.8 Kaikoura earthquake in the northern South Island of New Zealand has been reported as one of the most complex continental earthquakes ever documented1, which resulted in a distinctive on and off-fault deformation pattern. Previous geophysical studies confirm that the rupture globally propagated northward from epicenter. However, the exact rupture- propagation path is still not well understood because of the geometrical complexity, partly at sea, and the possibility of a blind thrust. Here we use a combination of state-of- the-art observation of surface deformation, provided by optical image correlation, and first principle physics-based numerical modeling to determine the most likely rupture path. We quantify in detail the observed horizontal co-seismic deformation and identify specific off-fault damage zones in the area of the triple junction between the Jordan, the Kekerengu and the Papatea fault segments. We also model dynamic rupture propagation, including the activation of off-fault damage, for two alternative rupture scenarios through the fault triple junction. Comparing our observations with the results from the above two modeled scenarios we show that only one of the scenarios best explains both the on and off-fault deformation fields. Our results provide a unique insight into the rupture pathway, by observing, and modeling, both on and off-fault deformation. We propose this combined approach here to narrow down the possible rupture scenarios for large continental earthquakes accompanied by co-seismic off-fault damage. △ Less

Submitted 10 May, 2018; v1 submitted 10 April, 2018; originally announced April 2018.

Comments: 32 pages, 11 figures

Fast and slow earthquakes emerge due to fault geometrical complexity

Authors: Pierre Romanet, Harsha S. Bhat, Romain Jolivet, Raúl Madariaga

Abstract: Active faults release elastic strain energy via a whole continuum of modes of slip, ranging from devastating earthquakes to Slow Slip Events and persistent creep. Understanding the mechanisms controlling the occurrence of rapid, dynamic slip radiating seismic waves (i.e. earthquakes) or slow, silent slip (i.e. SSEs) is a fundamental point in the estimation of seismic hazard along subduction zones.… ▽ More Active faults release elastic strain energy via a whole continuum of modes of slip, ranging from devastating earthquakes to Slow Slip Events and persistent creep. Understanding the mechanisms controlling the occurrence of rapid, dynamic slip radiating seismic waves (i.e. earthquakes) or slow, silent slip (i.e. SSEs) is a fundamental point in the estimation of seismic hazard along subduction zones. On top of showing slower rupture propagation velocity than earthquakes, SSEs exhibit different scaling relationships, which could reflect either different physical mechanisms or an intriguing lack of observations. Like earthquakes, SSEs are bound to occur along unstable portions of active faults, raising the question of the physical control of the mode of slip (seismic or aseismic) along these sections. Here, we use the numerical implementation of a simple rate-weakening fault model to explain the spontaneous occurrence, the characteristics and the scaling relationship of SSEs and earthquakes. We show that the simplest of fault geometrical complexities with uniform friction properties can reproduce slow and fast earthquakes without appealing to complex rheologies or mechanisms. Our model helps resolve many of the existing paradoxes between observations and physical models of earthquakes and SSEs. △ Less

Submitted 29 September, 2017; originally announced September 2017.

Comments: Resubmitted to Nat. Geosci

Lagrangian Averaging for Compressible Fluids

Authors: H. S. Bhat, R. C. Fetecau, J. E. Marsden, K. Mohseni, M. West

Abstract: This paper extends the derivation of the Lagrangian averaged Euler (LAE-$α$) equations to the case of barotropic compressible flows. The aim of Lagrangian averaging is to regularize the compressible Euler equations by adding dispersion instead of artificial viscosity. Along the way, the derivation of the isotropic and anisotropic LAE-$α$ equations is simplified and clarified. The derivation in… ▽ More This paper extends the derivation of the Lagrangian averaged Euler (LAE-$α$) equations to the case of barotropic compressible flows. The aim of Lagrangian averaging is to regularize the compressible Euler equations by adding dispersion instead of artificial viscosity. Along the way, the derivation of the isotropic and anisotropic LAE-$α$ equations is simplified and clarified. The derivation in this paper involves averaging over a tube of trajectories $η^ε$ centered around a given Lagrangian flow $η$. With this tube framework, the Lagrangian averaged Euler (LAE-$α$) equations are derived by following a simple procedure: start with a given action, Taylor expand in terms of small-scale fluid fluctuations $ξ$, truncate, average, and then model those terms that are nonlinear functions of $ξ$. Closure of the equations is provided through the use of \emph{flow rules}, which prescribe the evolution of the fluctuations along the mean flow. △ Less

Submitted 7 September, 2004; v1 submitted 17 November, 2003; originally announced November 2003.

Comments: 24 pages, no figures. To appear in Multiscale Modeling and Simulation