-
The Imaging Time-of-Propagation Detector at Belle II
Authors:
Hulya Atmacan,
Matt Belhorn,
Yinghui Guan,
Longke Li,
Bilas Pal,
Saurabh Sandilya,
Alan Schwartz,
Boqun Wang,
Shun Watanuki,
Matthew Andrew,
Matthew Barrett,
Martin Bessner,
Thomas Browder,
J. Bynes,
J. Cercillieux,
Shawn Dubey,
Oskar Hartbrich,
Chris Ketter,
Brian Kirby,
Shahab Kohani,
D. Kotchetkov,
Luca Macchiarulo,
B. Macek,
Kurtis Nishimura,
H. Purwar
, et al. (70 additional authors not shown)
Abstract:
We report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB $e^+e^-$ collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (qua…
▽ More
We report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB $e^+e^-$ collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (quartz) and transported to the ends of the bars via total internal reflection. One bar end is instrumented with finely segmented micro-channel-plate photomultiplier tubes to record the light, while the other end has a mirror attached to reflect the photons back to the instrumented end. Both the propagation times and hit positions of the Cherenkov photons are measured; these depend on the Cherenkov angle and together provide good discrimination among charged pions, kaons, and protons with momenta up to around 4 GeV/$c$. To date, the detector has been used to record and analyze over 400 fb$^{-1}$ of Belle II data.
△ Less
Submitted 26 April, 2025;
originally announced April 2025.
-
Wave propagation in anisotropic crystal using point contact excitation and detection method
Authors:
Varun Bhardwaj,
Kaushik Shukla,
Frank Melandsø,
Anowarul Habib
Abstract:
Lithium Niobate (LiNbO$_3$) is a piezoelectric crystal with a high electromechanical coupling coefficient. The development and miniaturization of acousto-electronics, and acousto-optics modulation filters, are primarily based on surface acoustic waves (SAWs) and bulk wave propagation in anisotropic crystals, such as LiNbO$_3$, Lithium Tantalate, and Quartz). It has the potential to be used in nano…
▽ More
Lithium Niobate (LiNbO$_3$) is a piezoelectric crystal with a high electromechanical coupling coefficient. The development and miniaturization of acousto-electronics, and acousto-optics modulation filters, are primarily based on surface acoustic waves (SAWs) and bulk wave propagation in anisotropic crystals, such as LiNbO$_3$, Lithium Tantalate, and Quartz). It has the potential to be used in nanoscale acoustics. The mechanical properties of the piezoelectric materials depend on the chemical compositions and crystal growth conditions. These excellent features are due to higher second-order optoacoustic nonlinearity with low losses in the broadband spectrum.
△ Less
Submitted 6 August, 2022;
originally announced August 2022.
-
Front-end electronic readout system for the Belle II imaging Time-Of-Propagation detector
Authors:
Dmitri Kotchetkov,
Oskar Hartbrich,
Matthew Andrew,
Matthew Barrett,
Martin Bessner,
Vishal Bhardwaj,
Thomas Browder,
Julien Cercillieux,
Ryan Conrad,
Istvan Danko,
Shawn Dubey,
James Fast,
Bryan Fulsom,
Christopher Ketter,
Brian Kirby,
Alyssa Loos,
Luca Macchiarulo,
Bostjan Macek,
Kurtis Nishimura,
Milind Purohit,
Carl Rosenfeld,
Ziru Sang,
Vladimir Savinov,
Gary Varner,
Gerard Visser
, et al. (2 additional authors not shown)
Abstract:
The Time-Of-Propagation detector is a Cherenkov particle identification detector based on quartz radiator bars for the Belle II experiment at the SuperKEKB electron-positron collider. The purpose of the detector is to identify the type of charged hadrons produced in electron-positron collisions, and requires a single photon timing resolution below 100 picoseconds. A novel front-end electronic syst…
▽ More
The Time-Of-Propagation detector is a Cherenkov particle identification detector based on quartz radiator bars for the Belle II experiment at the SuperKEKB electron-positron collider. The purpose of the detector is to identify the type of charged hadrons produced in electron-positron collisions, and requires a single photon timing resolution below 100 picoseconds. A novel front-end electronic system was designed, built, and integrated to acquire data from the 8192 microchannel plate photomultiplier tube channels in the detector. Waveform sampling of these analog signals is done by switched-capacitor array application-specific integrated circuits. The processes of triggering, digitization of windows of interest, readout, and data transfer to the Belle II data acquisition system are managed by Xilinx Zynq-7000 programmable system on a chip devices.
△ Less
Submitted 12 July, 2019; v1 submitted 28 April, 2018;
originally announced April 2018.
-
Microbial mutualism at a distance: the role of geometry in diffusive exchanges
Authors:
François J. Peaudecerf,
Freddy Bunbury,
Vaibhav Bhardwaj,
Martin A. Bees,
Alison G. Smith,
Raymond E. Goldstein,
Ottavio A. Croze
Abstract:
The exchange of diffusive metabolites is known to control the spatial patterns formed by microbial populations, as revealed by recent studies in the laboratory. However, the matrices used, such as agarose pads, lack the structured geometry of many natural microbial habitats, including in the soil or on the surfaces of plants or animals. Here we address the important question of how such geometry m…
▽ More
The exchange of diffusive metabolites is known to control the spatial patterns formed by microbial populations, as revealed by recent studies in the laboratory. However, the matrices used, such as agarose pads, lack the structured geometry of many natural microbial habitats, including in the soil or on the surfaces of plants or animals. Here we address the important question of how such geometry may control diffusive exchanges and microbial interaction. We model mathematically mutualistic interactions within a minimal unit of structure: two growing reservoirs linked by a diffusive channel through which metabolites are exchanged. The model is applied to study a synthetic mutualism, experimentally parameterised on a model algal-bacterial co-culture. Analytical and numerical solutions of the model predict conditions for the successful establishment of remote mutualisms, and how this depends, often counterintutively, on diffusion geometry. We connect our findings to understanding complex behaviour in synthetic and naturally occurring microbial communities.
△ Less
Submitted 2 February, 2018; v1 submitted 5 August, 2017;
originally announced August 2017.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
