Showing 1–23 of 23 results for author: Berggren, M

The ILD Detector: A Versatile Detector for an Electron-Positron Collider at Energies up to 1 TeV

Authors: H. Abramowicz, D. Ahmadi, J. Alcaraz, O. Alonso, L. Andricek, J. Anguiano, O. Arquero, F. Arteche, D. Attie, O. Bach, M. Basso, J. Baudot, A. Bean, T. Behnke, A. Bellerive, Y. Benhammou, M. Berggren, G. Bertolone, M. Besancon, A. Besson, O. Bezshyyko, G. Blazey, B. Bliewert, J. Bonis, R. Bosley , et al. (254 additional authors not shown)

Abstract: The International Large Detector, ILD, is a detector concept for an experiment at a future high energy lepton collider. The detector has been optimised for precision physics in a range of energies from 90~GeV to about 1~TeV. ILD features a high precision, large volume combined silicon and gaseous tracking system, together with a high granularity calorimeter, all inside a central solenoidal magneti… ▽ More The International Large Detector, ILD, is a detector concept for an experiment at a future high energy lepton collider. The detector has been optimised for precision physics in a range of energies from 90~GeV to about 1~TeV. ILD features a high precision, large volume combined silicon and gaseous tracking system, together with a high granularity calorimeter, all inside a central solenoidal magnetic field. The paradigm of particle flow has been the guiding principle of the design of ILD. ILD is based mostly on technologies which have been demonstrated by extensive research and test programs. The ILD concept is proposed both for linear and circular lepton collider, be it at CERN or elsewhere. The concept has been developed by a group of nearly 60 institutes from around the world, and offers a well developed and powerful environment for science and technology studies at lepton colliders. In this document, the required performance of the detector, the proposed implementation and the readiness of the different technologies needed for the implementation are discussed. △ Less

Submitted 6 June, 2025; originally announced June 2025.

Comments: Submitted to the EPSSU2024

Updated baseline design for HALHF: the hybrid, asymmetric, linear Higgs factory

Authors: C. A. Lindstrøm, E. Adli, J. B. B. Chen, P. Drobniak, E. E. Hørlyk, D. Kalvik, K. N. Sjobak, T. Barklow, S. Gessner, M. Hogan, M. Berggren, A. Laudrain, B. List, J. List, V. Maslov, K. Põder, M. Thévenet, N. Walker, J. Wood, S. Boogert, P. N. Burrows, V. Cilento, R. D'Arcy, B. Foster, S. Farrington , et al. (3 additional authors not shown)

Abstract: Particle physicists aim to construct a electron-positron Higgs factory as the next major particle collider. However, the high associated costs motivate the development of more affordable collider designs. Plasma-wakefield acceleration is a promising technology to this end. HALHF is a proposal for a Higgs factory that utilizes beam-driven plasma-wakefield acceleration to accelerate electrons to hig… ▽ More Particle physicists aim to construct a electron-positron Higgs factory as the next major particle collider. However, the high associated costs motivate the development of more affordable collider designs. Plasma-wakefield acceleration is a promising technology to this end. HALHF is a proposal for a Higgs factory that utilizes beam-driven plasma-wakefield acceleration to accelerate electrons to high energy with high gradient, while using radio-frequency acceleration to accelerate positrons to a lower energy. This asymmetry sidesteps a major difficulty in plasma acceleration: that of accelerating positrons with high efficiency and quality. Since publication, several challenges were identified in the original baseline design. We summarize the updated baseline design, which addresses these challenges, and describe the parameter- and cost-optimization process used to arrive at this design. △ Less

Submitted 27 May, 2025; originally announced May 2025.

Comments: 4 pages, 2 figures, submitted as an IPAC'25 proceeding (MOCD1)

Journal ref: Proceedings of the 16th International Particle Accelerator Conference, p. 53 (2025)

The Linear Collider Facility (LCF) at CERN

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S. Ampudia Castelazo, D. Angal-Kalinin, J. A. Anguiano, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, D. Attié, J. L. Avila-Jimenez, H. Baer, Y. Bai, C. Balazs, P. Bambade, T. Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive, S. Belomestnykh, Y. Benhammou , et al. (386 additional authors not shown)

Abstract: In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr… ▽ More In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC. △ Less

Submitted 19 June, 2025; v1 submitted 31 March, 2025; originally announced March 2025.

Comments: Submission to the ESPPU, as updated version May 26

Report number: DESY-25-054

HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration. Backup Document

Authors: Erik Adli, Joshua Appleby, Timothy L. Barklow, Marica Biagini, Jonas Björklund Svensson, Mikael Berggren, Simone Bettoni, Stewart Boogert, Philip Burrows, Allen Caldwell, Jian Bin Ben Chen, Vera Cilento, Laura Corner, Richard D'Arcy, Steffen Doebert, Wang Dou, Pierre Drobniak, Calvin Dyson, Sinead Farrington, John Farmer, Angeles Faus-Golfe, Manuel Formela, Arianne Formenti, Louis Forrester, Brian Foster , et al. (37 additional authors not shown)

Abstract: This document expands on the Comprehensive Summary submitted to the EPPSU 2026. It contains details on aspects of the HALHF project that could not be fitted into the Summary. Some sections contain work that is still preliminary and/or status reports on current progress. This document expands on the Comprehensive Summary submitted to the EPPSU 2026. It contains details on aspects of the HALHF project that could not be fitted into the Summary. Some sections contain work that is still preliminary and/or status reports on current progress. △ Less

Submitted 30 March, 2025; originally announced March 2025.

Comments: Submitted to the European Particle Physics Strategy Update 2026

Design Initiative for a 10 TeV pCM Wakefield Collider

Authors: Spencer Gessner, Jens Osterhoff, Carl A. Lindstrøm, Kevin Cassou, Simone Pagan Griso, Jenny List, Erik Adli, Brian Foster, John Palastro, Elena Donegani, Moses Chung, Mikhail Polyanskiy, Lindsey Gray, Igor Pogorelsky, Gongxiaohui Chen, Gianluca Sarri, Brian Beaudoin, Ferdinand Willeke, David Bruhwiler, Joseph Grames, Yuan Shi, Robert Szafron, Angira Rastogi, Alexander Knetsch, Xueying Lu , et al. (176 additional authors not shown)

Abstract: This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress re… ▽ More This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress resulting from a global R\&D program in order to deliver a unified, 10 TeV Wakefield Collider concept. Wakefield Accelerators provide ultra-high accelerating gradients which enables an upgrade path that will extend the reach of Linear Colliders beyond the electroweak scale. Here, we describe the organization of the Design Study including timeline and deliverables, and we detail the requirements and challenges on the path to a 10 TeV Wakefield Collider. △ Less

Submitted 31 March, 2025; v1 submitted 26 March, 2025; originally announced March 2025.

Comments: Contribution prepared for the 2025 update of the European Strategy for Particle Physics

A Linear Collider Vision for the Future of Particle Physics

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S Ampudia Castelazo, D. Angal-Kalinin, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, A. Aryshev, S. Asai, D. Attié, J. L. Avila-Jimenez, H. Baer, J. A. Bagger, Y. Bai, I. R. Bailey, C. Balazs, T Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive , et al. (391 additional authors not shown)

Abstract: In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much… ▽ More In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC. △ Less

Submitted 31 March, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Comments: Community document for EPPSU, will be updated several times

HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration

Authors: Erik Adli, Joshua Appleby, Timothy L. Barklow, Marica Biagini, Jonas Björklund Svensson, Mikael Berggren, Simone Bettoni, Stewart Boogert, Philip Burrows, Allen Caldwell, Jian Bin Ben Chen, Vera Cilento, Laura Corner, Richard D'Arcy, Steffen Doebert, Wang Dou, Pierre Drobniak, Calvin Dyson, Sinead Farrington, John Farmer, Angeles Faus-Golfe, Manuel Formela, Arianne Formenti, Louis Forrester, Brian Foster , et al. (37 additional authors not shown)

Abstract: HALHF is a hybrid linear collider that uses electron-driven plasma-wakefield acceleration to accelerate electrons to high energy while using radio-frequency cavity technology to accelerate positrons. The most cost-effective solution collides low-energy positrons with high-energy electrons, producing a boost to the final state in the electron direction with $γ= 1.67$. The current HALHF baseline des… ▽ More HALHF is a hybrid linear collider that uses electron-driven plasma-wakefield acceleration to accelerate electrons to high energy while using radio-frequency cavity technology to accelerate positrons. The most cost-effective solution collides low-energy positrons with high-energy electrons, producing a boost to the final state in the electron direction with $γ= 1.67$. The current HALHF baseline design produces a luminosity comparable to that of the baseline ILC but with a greatly reduced construction and carbon footprint and hence much lower cost than the mature linear-collider designs ILC and CLIC. Costs for HALHF are evaluated, together with that for the approximate 15-year R\&D programme necessary to realise HALHF. Time scales and cost for the R\&D are estimated. Upgrade paths for HALHF technology from a 250~GeV Higgs factory, through 380 and 550~GeV, up to 10~TeV are sketched. △ Less

Submitted 30 March, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Comments: Submitted to the European Strategy for Particle Physics, 2026 Update

Proceedings of the Erice Workshop: A new baseline for the hybrid, asymmetric, linear Higgs factory HALHF

Authors: Brian Foster, Erik Adli, Timothy L. Barklow, Mikael Berggren, Stewart Boogert, Jian Bin Ben Chen, Richard D'Arcy, Pierre Drobniak, Sinead Farrington, Spencer Gessner, Mark J. Hogan, Daniel Kalvik, Antoine Laudrain, Carl A. Lindstrøm, Benno List, Jenny List, Xueying Lu, Gudrid Moortgat Pick, Kristjan Põder, Andrei Seryi, Kyrre Sjobak, Maxence Thèvenet, Nicholas J. Walker, Jonathan Wood

Abstract: The HALHF collaboration has discussed a new baseline for the project, taking into account comments from the accelerator community on various aspects of the original design. In particular, these concerned the practicality of the dual-purpose linac to accelerate both colliding positron bunches and the drive beams required for the plasma linac. In addition, many other aspects of the project were also… ▽ More The HALHF collaboration has discussed a new baseline for the project, taking into account comments from the accelerator community on various aspects of the original design. In particular, these concerned the practicality of the dual-purpose linac to accelerate both colliding positron bunches and the drive beams required for the plasma linac. In addition, many other aspects of the project were also considered; the discussion and conclusions are documented in this paper. Finally, a new baseline is outlined that has been optimised and addresses several weaknesses in the original design, has higher luminosity, reduced centre-of-mass energy boost and additional features such as positron polarization as well as electron polarization. Although HALHF has become longer and more expensive, it remains significantly smaller and cheaper than other mature Higgs factory designs currently under discussion. △ Less

Submitted 25 March, 2025; v1 submitted 19 January, 2025; originally announced January 2025.

Comments: 32 pages, 13 figures, 2 tables

Physics Performance and Detector Requirements at an Asymmetric Higgs Factory

Authors: Antoine Laudrain, Ties Behnke, Carl Mikael Berggren, Karsten Buesser, Frank Gaede, Christophe Grojean, Benno List, Jenny List, Jürgen Reuter, Christian Schwanenberger

Abstract: The Hybrid Asymmetric Linear Higgs Factory (HALHF) proposes a shorter and cheaper design for a future Higgs factory. It reaches a $\sqrt{s} = 250$ GeV using a 500 GeV electron beam accelerated by an electron-driven plasma wake-field, and a conventionally-accelerated 31 GeV positron beam. Assuming plasma acceleration R&D challenges are solved in a timely manner, the asymmetry of the collisions brin… ▽ More The Hybrid Asymmetric Linear Higgs Factory (HALHF) proposes a shorter and cheaper design for a future Higgs factory. It reaches a $\sqrt{s} = 250$ GeV using a 500 GeV electron beam accelerated by an electron-driven plasma wake-field, and a conventionally-accelerated 31 GeV positron beam. Assuming plasma acceleration R&D challenges are solved in a timely manner, the asymmetry of the collisions brings additional challenges regarding the detector and the physics analyses, from forward boosted topologies and beam backgrounds. This contribution will detail the impact of beam parameters on beam-induced backgrounds, and provide a first look at what modification compared to e.g. the ILD can improve the physics performance at such a facility. The studies will be benchmarked against some flagship Higgs Factory analyses for comparison. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Comments: To be published in PoS

Organic electrochemical neurons and synapses with ion mediated spiking

Authors: H. Padinhare, C. Yang, D. Tu, J. Gerasimov, A. M. M. Dar, A. A. Moreira, M. Massetti, R. Kroon, D. Bliman, R. Olsson, E. Stavrinidou, M. Berggren, S. Fabiano

Abstract: Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio… ▽ More Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio-integration potential. Here, we report the first organic electrochemical neurons (OECNs) with ion-modulated spiking, based on allprinted complementary organic electrochemical transistors. We demonstrate facile biointegration of OECNs with Venus Flytrap (Dionaea muscipula) to induce lobe closure upon input stimuli. The OECNs can also be integrated with all-printed organic electrochemical synapses (OECSs), exhibiting short-term plasticity with paired-pulse facilitation and longterm plasticity with retention >1000 s, facilitating Hebbian learning. These soft and flexible OECNs operate below 0.6 V and respond to multiple stimuli, defining a new vista for localized artificial neuronal systems possible to integrate with bio-signaling systems of plants, invertebrates, and vertebrates. △ Less

Submitted 18 January, 2024; originally announced March 2024.

Rational Materials Design for In Operando Electropolymerization of Evolvable Organic Electrochemical Transistors

Authors: J. Y. Gerasimov, A. Halder, A. H. Mousa, S. Ghosh, P. C. Harikesh, T. Abrahamsson, D. Bliman, J. Strandberg, M. Massetti, I. Zozoulenko, D. T. Simon, M. Berggren, R. Olsson, S. Fabiano

Abstract: Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The… ▽ More Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The nature of the interface between the substrate and various monomer precursors of conducting polymers through molecular dynamics simulations is investigated, showing that monomer adsorption to the substrate produces an increase in the effective monomer concentration at the surface. By evaluating combinatorial couples of monomers baring various sidechains with differently functionalized substrates, it is shown that the interactions between the substrate and the monomer precursor control the lateral growth of a polymer film along an inert substrate. This effect has implications for fabricating synaptic systems on inexpensive, flexible substrates. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Synergistic Effect of Multi-Walled Carbon Nanotubes and Ladder-Type Conjugated Polymers on the Performance of N-Type Organic Electrochemical Transistors

Authors: S. Zhang, M. Massetti, T. P. Ruoko, D. Tu, C. Y. Yang, X. Liu, Z. Wu, Y. Lee, R. Kroon, P. Persson, H. Y. Woo, M. Berggren, C. Müller, M. Fahlman, S. Fabiano

Abstract: Organic electrochemical transistors (OECTs) have the potential to revolutionize the field of organic bioelectronics. To date, most of the reported OECTs include p-type (semi-)conducting polymers as the channel material, while n-type OECTs are yet at an early stage of development, with the best performing electron-transporting materials still suffering from low transconductance, low electron mobili… ▽ More Organic electrochemical transistors (OECTs) have the potential to revolutionize the field of organic bioelectronics. To date, most of the reported OECTs include p-type (semi-)conducting polymers as the channel material, while n-type OECTs are yet at an early stage of development, with the best performing electron-transporting materials still suffering from low transconductance, low electron mobility, and slow response time. Here, the high electrical conductivity of multi-walled carbon nanotubes (MWCNTs) and the large volumetric capacitance of the ladder-type π-conjugated redox polymer poly(benzimidazobenzophenanthroline) (BBL) are leveraged to develop n-type OECTs with record-high performance. It is demonstrated that the use of MWCNTs enhances the electron mobility by more than one order of magnitude, yielding fast transistor transient response (down to 15 ms) and high uC* (electron mobility x volumetric capacitance) of about 1 F/cmVs. This enables the development of complementary inverters with a voltage gain of > 16 and a large worst-case noise margin at a supply voltage of < 0.6 V, while consuming less than 1 uW of power. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Fully 3D-Printed Organic Electrochemical Transistors

Authors: Matteo Massetti, Silan Zhang, Harikesh Padinare, Bernhard Burtscher, Chiara Diacci, Daniel T. Simon, Xianjie Liu, Mats Fahlman, Deyu Tu, Magnus Berggren, Simone Fabiano

Abstract: Organic electrochemical transistors (OECTs) are currently being investigated for various applications, ranging from sensors to logics and neuromorphic hardware. The fabrication process must be compatible with flexible and scalable digital techniques to address this wide spectrum of applications. Here, we report a direct-write additive process to fabricate fully 3D printed OECTs. We developed 3D pr… ▽ More Organic electrochemical transistors (OECTs) are currently being investigated for various applications, ranging from sensors to logics and neuromorphic hardware. The fabrication process must be compatible with flexible and scalable digital techniques to address this wide spectrum of applications. Here, we report a direct-write additive process to fabricate fully 3D printed OECTs. We developed 3D printable conducting, semiconducting, insulating, and electrolyte inks to achieve this. The 3D-printed OECTs, operating in the depletion mode, can be fabricated on thin and flexible substrates, yielding high mechanical and environmental stability. We also developed a 3D printable nanocellulose formulation for the OECT substrate, demonstrating one of the first examples of fully 3D printed electronic devices. Good dopamine biosensing capabilities (limit of detection down to 6 uM without metal gate electrodes) and long-term (~1 hour) synapses response underscore that the present OECT manufacturing strategy is suitable for diverse applications requiring rapid design change and digitally enabled direct-write techniques. △ Less

Submitted 14 September, 2022; originally announced September 2022.

Investigations of an effective time-domain boundary condition for quiscent viscothermal acoustics

Authors: Linus Hägg, Martin Berggren

Abstract: Accurate simulations of sound propagation in narrow geometries need to account for viscous and thermal losses. In this respect, effective boundary conditions that model viscothermal losses in frequency-domain acoustics have recently gained in popularity. Here, we investigate the time-domain analogue of one such boundary condition. We find that the thermal part of the boundary condition is passive… ▽ More Accurate simulations of sound propagation in narrow geometries need to account for viscous and thermal losses. In this respect, effective boundary conditions that model viscothermal losses in frequency-domain acoustics have recently gained in popularity. Here, we investigate the time-domain analogue of one such boundary condition. We find that the thermal part of the boundary condition is passive in time domain as expected, while the viscous part is not. More precisely, we demonstrate that the viscous part is responsible for exponentially growing normal modes with unbounded temporal growth rates, which indicates ill-posedness of the considered model. A finite-difference-time-domain scheme is developed for simulations of lossy sound propagation in a duct. If viscous losses are neglected the obtained transmission characteristics are found to be in excellent agreement with frequency-domain simulations. In the general case, the simulations experience an instability much in line with the theoretical findings. △ Less

Submitted 23 October, 2024; v1 submitted 7 July, 2022; originally announced July 2022.

Comments: 22 pages, 8 figures

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

Low-power/high-gain flexible complementary circuits based on printed organic electrochemical transistors

Authors: Chi-Yuan Yang, Deyu Tu, Tero-Petri Ruoko, Jennifer Y. Gerasimov, Han-Yan Wu, P. C. Harikesh, Renee Kroon, Christian Müller, Magnus Berggren, Simone Fabiano

Abstract: The ability to accurately extract low-amplitude voltage signals is crucial in several fields, ranging from single-use diagnostics and medical technology to robotics and the Internet of Things. The organic electrochemical transistor, which features large transconductance values at low operation voltages, is ideal for monitoring small signals. Its large transconductance translates small gate voltage… ▽ More The ability to accurately extract low-amplitude voltage signals is crucial in several fields, ranging from single-use diagnostics and medical technology to robotics and the Internet of Things. The organic electrochemical transistor, which features large transconductance values at low operation voltages, is ideal for monitoring small signals. Its large transconductance translates small gate voltage variations into significant changes in the drain current. However, a current-to-voltage conversion is further needed to allow proper data acquisition and signal processing. Low power consumption, high amplification, and manufacturability on flexible and low-cost carriers are also crucial and highly anticipated for targeted applications. Here, we report low-power and high-gain flexible circuits based on printed complementary organic electrochemical transistors (OECTs). We leverage the low threshold voltage of both p-type and n-type enhancement-mode OECTs to develop complementary voltage amplifiers that can sense voltages as low as 100 $μ$V, with gains of 30.4 dB and at a power consumption < 2.7 $μ$W (single-stage amplifier). At the optimal operating conditions, the voltage gain normalized to power consumption reaches 169 dB/$μ$W, which is > 50 times larger than state-of-the-art OECT-based amplifiers. In a two-stage configuration, the complementary voltage amplifiers reach a DC voltage gain of 193 V/V, which is the highest among emerging CMOS-like technologies operating at supply voltages below 1 volt. Our findings demonstrate that flexible complementary circuits based on printed OECTs define a power-efficient platform for sensing and amplifying low-amplitude voltage signals in several emerging beyond-silicon applications. △ Less

Submitted 14 June, 2021; originally announced June 2021.

Redox-tunable structural colour images based on UV-patterned conducting polymers

Authors: Shangzhi Chen, Stefano Rossi, Ravi Shanker, Giancarlo Cincotti, Sampath Gamage, Philipp Kuhne, Vallery Stanishev, Isak Engquist, Magnus Berggren, Jesper Edberg, Vanya Darakchieva, Magnus P. Jonsson

Abstract: Precise manipulation of light-matter interaction has enabled a wide variety of approaches to create bright and vivid structural colours. Techniques utilizing photonic crystals, Fabry-Pérot cavities, plasmonics, or high-refractive index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub… ▽ More Precise manipulation of light-matter interaction has enabled a wide variety of approaches to create bright and vivid structural colours. Techniques utilizing photonic crystals, Fabry-Pérot cavities, plasmonics, or high-refractive index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub-wavelength nanostructures, limited active areas, and inherent absence of tunability with these approaches significantly impede their further developments towards flexible, large-scale, and switchable devices compatible with facile and cost-effective production. Herein, we present a way to generate structural colours based on conducting polymer thin films prepared on metallic surfaces via vapour phase polymerization and ultraviolet (UV) light patterning. Varying the UV dose leads to synergistic variation of film absorption and thickness, which generates controllable colours from violet to red. Together with greyscale photomasks this enables fabrication of high-resolution colour images using single exposure steps. We further demonstrate spatiotemporal tuning of the structurally coloured surfaces and images via electrochemical modulation of the polymer redox state. The simple structure, facile fabrication, wide colour gamut, and dynamic colour tuning make this concept competitive for future multi-functional and smart displays. △ Less

Submitted 20 January, 2021; originally announced January 2021.

On the well-posedness of Galbrun's equation

Authors: Linus Hägg, Martin Berggren

Abstract: Galbrun's equation, which is a second order partial differential equation describing the evolution of a so-called Lagrangian displacement vector field, can be used to study acoustics in background flows as well as perturbations of astrophysical flows. Our starting point for deriving Galbrun's equation is linearized Euler's equations, which is a first order system of partial differential equations… ▽ More Galbrun's equation, which is a second order partial differential equation describing the evolution of a so-called Lagrangian displacement vector field, can be used to study acoustics in background flows as well as perturbations of astrophysical flows. Our starting point for deriving Galbrun's equation is linearized Euler's equations, which is a first order system of partial differential equations that describe the evolution of the so-called Eulerian flow perturbations. Given a solution to linearized Euler's equations, we introduce the Lagrangian displacement as the solution to a linear first order partial differential equation, driven by the Eulerian perturbation of the fluid velocity. Our Lagrangian displacement solves Galbrun's equation, provided it is regular enough and that the so-called "no resonance" assumption holds. In the case that the background flow is steady and tangential to the domain boundary, we prove existence, uniqueness, and continuous dependence on data of solutions to an initial--boundary value problem for linearized Euler's equations. For such background flows, we demonstrate that the Lagrangian displacement is well-defined, that the initial datum of the Lagrangian displacement can be chosen in order to fulfill the "no resonance" assumption, and derive a classical energy estimate for (sufficiently regular solutions to) Galbrun's equation. Due to the presence of zeroth order terms of indefinite signs in the equations, the energy estimate allows solutions that grow exponentially with time. △ Less

Submitted 3 February, 2020; v1 submitted 9 December, 2019; originally announced December 2019.

Comments: Compared to the previous version some typos have been corrected and minor cosmetic changes have been made

The International Linear Collider: A Global Project

Authors: Philip Bambade, Tim Barklow, Ties Behnke, Mikael Berggren, James Brau, Philip Burrows, Dmitri Denisov, Angeles Faus-Golfe, Brian Foster, Keisuke Fujii, Juan Fuster, Frank Gaede, Paul Grannis, Christophe Grojean, Andrew Hutton, Benno List, Jenny List, Shinichiro Michizono, Akiya Miyamoto, Olivier Napoly, Michael Peskin, Roman Poeschl, Frank Simon, Jan Strube, Junping Tian , et al. (7 additional authors not shown)

Abstract: The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We r… ▽ More The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We review the important role that polarized beams play in the ILC program. The first stage of the ILC is planned to be a Higgs factory at 250 GeV in the centre of mass. Energy upgrades can naturally be implemented based on the concept of a linear collider. We discuss in detail the ILC program of Higgs boson measurements and the expected precision in the determination of Higgs couplings. We compare the ILC capabilities to those of the HL-LHC and to those of other proposed e+e- Higgs factories. We emphasize throughout that the readiness of the accelerator and the estimates of ILC performance are based on detailed simulations backed by extensive RandD and, for the accelerator technology, operational experience. △ Less

Submitted 5 April, 2019; v1 submitted 4 March, 2019; originally announced March 2019.

Comments: 104 pages, 88 figures; v2: minor typo corrections; v3: many minor changes, including small corrections to the Tables and Figures in Section 11

Report number: DESY 19-037, FERMILAB-FN-1067-PPD, IFIC/19-10, IRFU-19-10, JLAB-PHY-19-2854, KEK Preprint 2018-92, LAL/RT 19-001, PNNL-SA-142168, SLAC-PUB-17412

The International Linear Collider. A Global Project

Authors: Hiroaki Aihara, Jonathan Bagger, Philip Bambade, Barry Barish, Ties Behnke, Alain Bellerive, Mikael Berggren, James Brau, Martin Breidenbach, Ivanka Bozovic-Jelisavcic, Philip Burrows, Massimo Caccia, Paul Colas, Dmitri Denisov, Gerald Eigen, Lyn Evans, Angeles Faus-Golfe, Brian Foster, Keisuke Fujii, Juan Fuster, Frank Gaede, Jie Gao, Paul Grannis, Christophe Grojean, Andrew Hutton , et al. (37 additional authors not shown)

Abstract: A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal… ▽ More A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years. △ Less

Submitted 28 January, 2019; originally announced January 2019.

The International Linear Collider. A European Perspective

Authors: Philip Bambade, Ties Behnke, Mikael Berggren, Ivanka Bozovic-Jelisavcic, Philip Burrows, Massimo Caccia, Paul Colas, Gerald Eigen, Lyn Evans, Angeles Faus-Golfe, Brian Foster, Juan Fuster, Frank Gaede, Christophe Grojean, Marek Idzik, Andrea Jeremie, Tadeusz Lesiak, Aharon Levy, Benno List, Jenny List, Joachim Mnich, Olivier Napoly, Carlo Pagani, Roman Poeschl, Francois Richard , et al. (9 additional authors not shown)

Abstract: The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-prec… ▽ More The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-precision and model-independent determinations of its parameters. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. The use of polarised electron and positron beams opens new capabilities and scenarios that add to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The international -- including European -- interest for the project is very strong. Europe has participated in the ILC project since its early conception and plays a major role in its present development covering most of its scientific and technological aspects: physics studies, accelerator and detectors. The potential for a wide participation of European groups and laboratories is thus high, including important opportunities for European industry. Following decades of technical development, R&D, and design optimisation, the project is ready for construction and the European particle physics community, technological centers and industry are prepared to participate in this challenging endeavour. △ Less

Submitted 28 January, 2019; originally announced January 2019.

Acoustic boundary layers as boundary conditions

Authors: Martin Berggren, Anders Bernland, Daniel Noreland

Abstract: The linearized, compressible Navier-Stokes equations can be used to model acoustic wave propagation in the presence of viscous and thermal boundary layers. However, acoustic boundary layers are notorious for invoking prohibitively high resolution requirements on numerical solutions of the equations. We derive and present a strategy for how viscous and thermal boundary-layer effects can be represen… ▽ More The linearized, compressible Navier-Stokes equations can be used to model acoustic wave propagation in the presence of viscous and thermal boundary layers. However, acoustic boundary layers are notorious for invoking prohibitively high resolution requirements on numerical solutions of the equations. We derive and present a strategy for how viscous and thermal boundary-layer effects can be represented as a boundary condition on the standard Helmholtz equation for the acoustic pressure. This boundary condition constitutes an $O(δ)$ perturbation, where $δ$ is the boundary-layer thickness, of the vanishing Neumann condition for the acoustic pressure associated with a lossless sound-hard wall. The approximate model is valid when the wavelength and the minimum radius of curvature of the wall is much larger than the boundary layer thickness. In the special case of sound propagation in a cylindrical duct, the model collapses to the classical Kirchhoff solution. We assess the model in the case of sound propagation through a compression driver, a kind of transducer that is commonly used to feed horn loudspeakers. Due to the presence of shallow chambers and thin slits in the device, it is crucial to include modeling of visco-thermal losses in the acoustic analysis. The transmitted power spectrum through the device calculated numerically using our model agrees well with computations using a hybrid model, where the full linearized, compressible Navier-Stokes equations are solved in the narrow regions of the device and the inviscid Helmholtz equations elsewhere. However, our model needs almost two orders of magnitude less memory and computational time than the more complete model. △ Less

Submitted 4 June, 2018; v1 submitted 12 January, 2018; originally announced January 2018.

SGV 3.0 - a fast detector simulation

Authors: Mikael Berggren

Abstract: The need for fast simulation programs is emphasised, both in terms of the need for "rapid response" to new results - in particular from the LHC - and new theoretical ideas, and in terms of how to cope with multi-billion simulated event samples. The latter would arise both from the need to be able to simulate significantly more events than expected in the real data, also for high cross-section proc… ▽ More The need for fast simulation programs is emphasised, both in terms of the need for "rapid response" to new results - in particular from the LHC - and new theoretical ideas, and in terms of how to cope with multi-billion simulated event samples. The latter would arise both from the need to be able to simulate significantly more events than expected in the real data, also for high cross-section processes, and the need to scan multi-parameter theories. The {\it Simulation à Grande Vitesse}, SGV, is presented, and is shown to be able to address these issues. The tracking performance of SGV is shown to reproduce very closely that of the full simulation and reconstruction of the ILD concept. Preliminary results on how to also closely emulate the calorimetric performance from full simulation is presented. The procedure is parametric, with no the need to simulate the detailed shower development, and promises to be many orders of magnitude faster than such approaches. Contrary to what is often the case with fast simulation programs, the procedure gives a somewhat {\it pessimistic} result, compared to the full simulation and reconstruction. △ Less

Submitted 1 March, 2012; originally announced March 2012.

Comments: Contribution to LCWS 2011