-
Silicon Double-Disk Optomechanical Resonators from Wafer-Scale Double-Layered Silicon-on-Insulator
Authors:
Amy Navarathna,
Benjamin J. Carey,
James S. Bennett,
Soroush Khademi,
Warwick P. Bowen
Abstract:
Whispering gallery mode (WGM) optomechanical resonators are a promising technology for the simultaneous control and measurement of optical and mechanical degrees of freedom at the nanoscale. They offer potential for use across a wide range of applications such as sensors and quantum transducers. Double-disk WGM resonators, which host strongly interacting mechanical and optical modes co-localized a…
▽ More
Whispering gallery mode (WGM) optomechanical resonators are a promising technology for the simultaneous control and measurement of optical and mechanical degrees of freedom at the nanoscale. They offer potential for use across a wide range of applications such as sensors and quantum transducers. Double-disk WGM resonators, which host strongly interacting mechanical and optical modes co-localized around their circumference, are particularly attractive due to their high optomechanical coupling. Large-scale integrated fabrication of silicon double-disk WGM resonators has not previously been demonstrated. In this work we present a process for the fabrication of double-layer silicon-on-insulator wafers, which we then use to fabricate functional optomechanical double silicon disk resonators with on-chip optical coupling. The integrated devices present an experimentally observed optical quality factors of the order of 10^5 and a single-photon optomechanical coupling of approximately 15 kHz.
△ Less
Submitted 6 May, 2025; v1 submitted 31 July, 2024;
originally announced August 2024.
-
Quantitative Profilometric Measurement of Magnetostriction in Thin-Films
Authors:
Hamish Greenall,
Benjamin J. Carey,
Douglas Bulla,
James S. Bennett,
Glen I. Harris,
Fernando Gotardo,
Scott Foster,
Warwick P. Bowen
Abstract:
A DC non-contact method for measuring the magnetostrictive strain in thin-films is demonstrated, achieving a state-of-the-art sensitivity of 0.1 ppm. In this method, an optical profilometer is used to measure the curvature induced in a magnetostrictively coated coverslip under a DC field through phase-sensitive interferometry. From this the magnetostrictive stress and strain are calculated using S…
▽ More
A DC non-contact method for measuring the magnetostrictive strain in thin-films is demonstrated, achieving a state-of-the-art sensitivity of 0.1 ppm. In this method, an optical profilometer is used to measure the curvature induced in a magnetostrictively coated coverslip under a DC field through phase-sensitive interferometry. From this the magnetostrictive stress and strain are calculated using Stoney's formula. This addresses limitations of conventional techniques that measure magnetostriction based on the deflection of a cantilever under an AC field, which require complex dedicated set-ups and are sensitive to vibrational noise. Further, it reveals information about the anisotropy of the film and allows for the possibility of measuring multiple samples simultaneously. The theoretical sensitivity limits are derived, predicting a shot-noise-limit of 0.01 ppm. The method is implemented to measure the magnetostrictive hysteresis and piezomagnetic coupling of thin-film galfenol. Degradation in film performance is observed above a thickness of 206 nm, alongside a change in coercivity. This prompts investigation into the growth and optimization of galfenol films for use in devices.
△ Less
Submitted 21 November, 2023;
originally announced November 2023.
-
Waveguide-integrated and portable optomechanical magnetometer
Authors:
Fernando Gotardo,
Benjamin J. Carey,
Hamish Greenall,
Glen I. Harris,
Erick Romero,
Douglas Bulla,
Elizabeth M. Bridge,
James S. Bennett,
Scott Foster,
Warwick P. Bowen
Abstract:
Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read out via a suspended optica…
▽ More
Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read out via a suspended optical waveguide fabricated on the same silicon chip as the magnetometer. Moreover, we demonstrate that thermomechanical noise limited sensitivity is possible using portable electronics and laser. The magnetometer employs a silica microdisk resonator selectively sputtered with a magnetostrictive film of galfenol (FeGa) which induces a resonant frequency shift in response to an external magnetic field. Experimental results reveal the retention of high quality-factor optical whispering gallery mode resonances whilst also demonstrating high sensitivity and dynamic range in ambient conditions. The use of off-the-shelf portable electronics without compromising sensor performance demonstrates promise for applications.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Continuous optical-to-mechanical quantum state transfer in the unresolved sideband regime
Authors:
Amy Navarathna,
James S. Bennett,
Warwick P. Bowen
Abstract:
Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the u…
▽ More
Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the unresolved sideband regime. The protocol is based on feedback cooling, can be implemented with current technology, and is able to transfer non-Gaussian quantum states with high fidelity. Our protocol significantly expands the kinds of optomechanical devices for which continuous optical-to-mechanical state transfer is possible, paving the way towards quantum technological applications and the preparation of macroscopic superpositions to test the fundamentals of quantum science.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Precision Magnetometers for Aerospace Applications
Authors:
James S. Bennett,
Brian E. Vyhnalek,
Hamish Greenall,
Elizabeth M. Bridge,
Fernando Gotardo,
Stefan Forstner,
Glen I. Harris,
Félix A. Miranda,
Warwick P. Bowen
Abstract:
Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration -- including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles -- is also a key scient…
▽ More
Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration -- including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles -- is also a key scientific and technological frontier, believed by many to be paramount to the long-term survival and prosperity of humanity. All of these aerospace applications require reliable control of the craft and the ability to record high-precision measurements of physical quantities. Magnetometers deliver on both of these aspects, and have been vital to the success of numerous missions. In this review paper, we provide an introduction to the relevant instruments and their applications. We consider past and present magnetometers, their proven aerospace applications, and emerging uses. We then look to the future, reviewing recent progress in magnetometer technology. We particularly focus on magnetometers that use optical readout, including atomic magnetometers, magnetometers based on quantum defects in diamond, and optomechanical magnetometers. These optical magnetometers offer a combination of field sensitivity, size, weight, and power consumption that allows them to reach performance regimes that are inaccessible with existing techniques. This promises to enable new applications in areas ranging from unmanned vehicles to navigation and exploration.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Mechanical squeezing via fast continuous measurement
Authors:
Chao Meng,
George A. Brawley,
James S. Bennett,
Michael R. Vanner,
Warwick P. Bowen
Abstract:
We revisit quantum state preparation of an oscillator by continuous linear position measurement. Quite general analytical expressions are derived for the conditioned state of the oscillator. Remarkably, we predict that quantum squeezing is possible outside of both the backaction dominated and quantum coherent oscillation regimes, relaxing experimental requirements even compared to ground-state coo…
▽ More
We revisit quantum state preparation of an oscillator by continuous linear position measurement. Quite general analytical expressions are derived for the conditioned state of the oscillator. Remarkably, we predict that quantum squeezing is possible outside of both the backaction dominated and quantum coherent oscillation regimes, relaxing experimental requirements even compared to ground-state cooling. This provides a new way to generate non-classical states of macroscopic mechanical oscillators, and opens the door to quantum sensing and tests of quantum macroscopicity at room temperature.
△ Less
Submitted 24 July, 2020; v1 submitted 14 November, 2019;
originally announced November 2019.
