-
Does the van der Waals force play a part in evaporation?
Authors:
E. S. Benilov
Abstract:
It is argued that the van der Waals force exerted by the liquid and vapor/air on the molecules escaping from one phase into the other strongly affects the characteristics of evaporation. This is shown using two distinct descriptions of the van der Waals force: the Vlasov and diffuse-interface models, each of which is applied to two distinct settings: a liquid evaporating into its vapor and a liqui…
▽ More
It is argued that the van der Waals force exerted by the liquid and vapor/air on the molecules escaping from one phase into the other strongly affects the characteristics of evaporation. This is shown using two distinct descriptions of the van der Waals force: the Vlasov and diffuse-interface models, each of which is applied to two distinct settings: a liquid evaporating into its vapor and a liquid evaporating into air (in all cases, the vapor-to-liquid density ratio is small). For the former setting, the results are consistent with the Hertz--Knudsen Law (HKL), but the evaporation/condensation probability is very small (in the classical HKL, it is order one). For the latter setting, the dependence of the evaporation rate on the difference between the saturated vapor pressure and its actual value is shown to be nonlinear (whereas the classical HKL predicts a linear dependence). The difference between the two settings indicates that the van der Waals force exerted by the air strongly affects evaporation (contrary to the general assumption that the ambient gas is unimportant). Finally, the diffuse interface model is shown to be inapplicable in a narrow region at the outskirts of the interface -- as a result, it noticeably underestimates the evaporative flux by comparison with the (more accurate) Vlasov model.
△ Less
Submitted 12 February, 2024; v1 submitted 18 December, 2023;
originally announced December 2023.
-
The multicomponent diffuse-interface model and its application to water/air interfaces
Authors:
E. S. Benilov
Abstract:
Fundamental properties of the multicomponent diffuse-interface model (DIM), such as the maximum entropy principle and conservation laws, are used to explore the basic interfacial dynamics and phase transitions in fluids. Flat interfaces with monotonically-changing densities of the components are proved to be stable. A liquid layer in contact with oversaturated but stable vapour is shown to either…
▽ More
Fundamental properties of the multicomponent diffuse-interface model (DIM), such as the maximum entropy principle and conservation laws, are used to explore the basic interfacial dynamics and phase transitions in fluids. Flat interfaces with monotonically-changing densities of the components are proved to be stable. A liquid layer in contact with oversaturated but stable vapour is shown to either fully evaporate or eternally expand (depending on the initial perturbation), whereas a liquid in contact with saturated vapour always evaporates. If vapour is bounded by a solid wall with a sufficiently large contact angle, spontaneous condensation occurs in the vapour. The external parameters of the multicomponent DIM -- e.g., the Korteweg matrix describing the long-range intermolecular forces -- are determined for the water-air combination. The Soret and Dufour effects are shown to be negligible in this case, and the interfacial flow, close to isothermal.
△ Less
Submitted 16 December, 2022; v1 submitted 12 August, 2022;
originally announced August 2022.
-
Dynamics of a drop floating in vapor of the same fluid
Authors:
E. S. Benilov
Abstract:
Evaporation of a liquid drop surrounded by either vapor of the same fluid, or vapor and air, is usually attributed to vapor diffusion -- which, however, does not apply to the former setting, as pure fluids do not diffuse. The present paper puts forward an additional mechanism, one that applies to both settings. It is shown that disparities between the drop and vapor in terms of their pressure and…
▽ More
Evaporation of a liquid drop surrounded by either vapor of the same fluid, or vapor and air, is usually attributed to vapor diffusion -- which, however, does not apply to the former setting, as pure fluids do not diffuse. The present paper puts forward an additional mechanism, one that applies to both settings. It is shown that disparities between the drop and vapor in terms of their pressure and chemical potential give rise to a flow. Its direction depends on the vapor density and the drop's size. In undersaturated or saturated vapor, all drops evaporate -- but in oversaturated (yet thermodynamically stable) vapor, there exists a critical radius: smaller drops evaporate, larger drops act as centers of condensation and grow. The developed model is used to estimate the evaporation time of a drop floating in saturated vapor. It is shown that, if the vapor-to-liquid density ratio is small, so is the evaporative flux -- as a result, millimeter-sized water drops at temperatures lower than $70^{\circ}\mathrm{C}$ survive for days. If, however, the temperature is comparable (but not necessarily close) to its critical value, such drops evaporate within minutes. Micron-sized drops, in turn, evaporate within seconds for all temperatures between the triple and critical points.
△ Less
Submitted 25 March, 2022; v1 submitted 3 September, 2021;
originally announced September 2021.
-
Can a liquid drop on a substrate be in equilibrium with saturated vapor?
Authors:
E. S. Benilov
Abstract:
It is well-known that liquid and saturated vapor, separated by a flat interface in an unbounded space, are in equilibrium. One would similarly expect a liquid drop, sitting on a flat substrate, to be in equilibrium with the vapor surrounding it. Yet, it is not: as shown in this work, the drop evaporates. Mathematically, this conclusion is deduced using the diffuse-interface model, but it can also…
▽ More
It is well-known that liquid and saturated vapor, separated by a flat interface in an unbounded space, are in equilibrium. One would similarly expect a liquid drop, sitting on a flat substrate, to be in equilibrium with the vapor surrounding it. Yet, it is not: as shown in this work, the drop evaporates. Mathematically, this conclusion is deduced using the diffuse-interface model, but it can also be reformulated in terms of the maximum-entropy principle, suggesting model independence. Physically, evaporation of drops is due to the so-called Kelvin effect, which gives rise to a liquid-to-vapor mass flux in all cases where the boundary of the liquid phase is convex.
△ Less
Submitted 13 September, 2021; v1 submitted 27 June, 2021;
originally announced June 2021.
-
Paradoxical predictions of liquid curtains with surface tension
Authors:
E. S. Benilov
Abstract:
This paper examines two-dimensional liquid curtains ejected at an angle to the horizontal and affected by gravity and surface tension. The flow is, to leading order, shearless and viscosity, negligible. The Froude number is large, so that the radius of the curtain's curvature exceeds its thickness. The Weber number is close to unity, so that the forces of inertia and surface tension are almost per…
▽ More
This paper examines two-dimensional liquid curtains ejected at an angle to the horizontal and affected by gravity and surface tension. The flow is, to leading order, shearless and viscosity, negligible. The Froude number is large, so that the radius of the curtain's curvature exceeds its thickness. The Weber number is close to unity, so that the forces of inertia and surface tension are almost perfectly balanced. An asymptotic equation is derived under these assumptions, and its steady solutions are explored. It is shown that, for a given pair of ejection velocity/angle, infinitely many solutions exist, each representing a steady curtain with a stationary capillary wave superposed on it. These solutions describe a rich variety of behaviours: in addition to arching downwards, curtains can zigzag downwards, self-intersect, and even rise until the initial supply of the liquid's kinetic energy is used up. The last type of solutions corresponds to a separatrix between upward- and downward-bending curtains -- in both cases, self-intersecting (such solutions are meaningful only until the first intersection, after which the liquid just splashes down). Finally, suggestions are made as to how the existence of upward-bending curtains can be tested experimentally.
△ Less
Submitted 28 March, 2021; v1 submitted 3 November, 2020;
originally announced November 2020.
-
Nonexistence of two-dimensional sessile drops in the diffuse-interface model
Authors:
E. S. Benilov
Abstract:
The diffuse-interface model (DIM) is a widely used tool for modeling fluid phenomena involving interfaces -- such as, for example, sessile drops (liquid drops on a solid substrate, surrounded by saturated vapor) and liquid ridges (two-dimensional sessile drops). In this work, it is proved that, surprisingly, the DIM does not admit solutions describing static liquid ridges. If, however, the vapor-t…
▽ More
The diffuse-interface model (DIM) is a widely used tool for modeling fluid phenomena involving interfaces -- such as, for example, sessile drops (liquid drops on a solid substrate, surrounded by saturated vapor) and liquid ridges (two-dimensional sessile drops). In this work, it is proved that, surprisingly, the DIM does not admit solutions describing static liquid ridges. If, however, the vapor-to-liquid density ratio is small -- as, for example, for water at room temperature -- the ridges can still be observed as quasi-static states, as their evolution is too slow to be distinguishable from evaporation. Interestingly, the nonexistence theorem cannot be extended to axisymmetric sessile drops and ridges near a vertical wall, which are not ruled out.
△ Less
Submitted 23 September, 2021; v1 submitted 15 July, 2020;
originally announced July 2020.
-
Dependence of the surface tension and contact angle on the temperature, as described by the diffuse-interface model
Authors:
E. S. Benilov
Abstract:
Four results associated with the diffuse-interface model (DIM) for contact lines are reported in this paper. First, a boundary condition is derived, which states that the fluid near a solid wall must have a certain density $ρ_{0}$ depending on the solid's properties. Unlike previous derivations, the one presented here is based on the same physics as the DIM itself and does not require additional a…
▽ More
Four results associated with the diffuse-interface model (DIM) for contact lines are reported in this paper. First, a boundary condition is derived, which states that the fluid near a solid wall must have a certain density $ρ_{0}$ depending on the solid's properties. Unlike previous derivations, the one presented here is based on the same physics as the DIM itself and does not require additional assumptions. Second, asymptotic estimates are used to check a conjecture lying at the foundation of the DIM, as well as all other models of contact lines: that liquid-vapor interfaces are nearly isothermal. It turns out that, for water, they are not -- although, for a more viscous fluid, they can be. The non-isothermaility occurs locally, near the interface, but can still affect the contact-line dynamics. Third, the DIM coupled with a realistic equation of state for water is used to compute the dependence of the surface tension $σ$ on the temperature $T$, which agrees well with the empiric $σ(T)$. Fourth, the same framework is used to compute the static contact angle of a water-vapor interface. It is shown that, with increasing temperature, the contact angle becomes either $180^{\circ}$ (perfect hydrophobicity) or $0^{\circ}$ (perfect hydrophilicity), depending on whether $ρ_{0}$ matches the density of saturated vapor or liquid, respectively. Such behavior presumably occurs in all fluids, not just water, and for all sufficiently strong variations of parameters, not just that of the temperature -- as corroborated by existing observations of drops under variable electric field.
△ Less
Submitted 23 September, 2021; v1 submitted 30 March, 2020;
originally announced March 2020.
-
Why do bubbles in Guinness sink?
Authors:
E. S. Benilov,
C. P. Cummins,
W. T. Lee
Abstract:
Stout beers show the counter-intuitive phenomena of sinking bubbles while the beer is settling. Previous research suggests that this phenomena is due the small size of the bubbles in these beers and the presence of a circulatory current, directed downwards near the side of the wall and upwards in the interior of the glass. The mechanism by which such a circulation is established and the conditions…
▽ More
Stout beers show the counter-intuitive phenomena of sinking bubbles while the beer is settling. Previous research suggests that this phenomena is due the small size of the bubbles in these beers and the presence of a circulatory current, directed downwards near the side of the wall and upwards in the interior of the glass. The mechanism by which such a circulation is established and the conditions under which it will occur has not been clarified. In this paper, we demonstrate using simulations and experiment that the flow in a glass of stout depends on the shape of the glass. If it narrows downwards (as the traditional stout glass, the pint, does), the flow is directed downwards near the wall and upwards in the interior and sinking bubbles will be observed. If the container widens downwards, the flow is opposite to that described above and only rising bubbles will be seen.
△ Less
Submitted 23 May, 2012;
originally announced May 2012.