-
Tutorial on Silicon Photonics Integrated Platform Fiber Edge Coupling
Authors:
Sergey S. Avdeev,
Aleksandr S. Baburin,
Evgeniy V. Sergeev,
Alexei B. Kramarenko,
Arseniy V. Belyaev,
Danil V. Kushnev,
Kirill A. Buzaverov,
Ilya A. Stepanov,
Vladimir V. Echeistov,
Sergey V. Bukatin,
Ali Sh. Amiraslanov,
Evgeniy S. Lotkov,
Dmitriy A. Baklykov,
Ilya A. Rodionov
Abstract:
Photonic integrated circuits (PICs) play a crucial role in almost every aspect of modern life, such as data storage, telecommunications, medical diagnostics, green energy, autonomous driving, agriculture, and high-performance computing. To fully harness their benefits, an efficient coupling mechanism is required to successfully launch light into waveguides from fibers. This study introduces low-lo…
▽ More
Photonic integrated circuits (PICs) play a crucial role in almost every aspect of modern life, such as data storage, telecommunications, medical diagnostics, green energy, autonomous driving, agriculture, and high-performance computing. To fully harness their benefits, an efficient coupling mechanism is required to successfully launch light into waveguides from fibers. This study introduces low-loss coupling strategies and their implementation for a silicon nitride integrated platform. Here we present an overview of coupling technologies, optimized designs, and a tutorial on manufacturing techniques for inverted tapers, which enable effective coupling for both transverse-magnetic and transverse-electric modes. The optimized coupling losses for the UHNA-7 fiber and the inverted taper Si3N4 coupler reached -0.15 dB at 1550 nm per connection for single-mode waveguides with 220x1200 nm cross section. The measured coupling losses in the inverted taper coupler with a standard single-mode fiber were -1.50 dB at 1550 nm per connection for the same platform.
△ Less
Submitted 17 September, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Status and initial physics performance studies of the MPD experiment at NICA
Authors:
MPD Collaboration,
V. Abgaryan,
R. Acevedo Kado,
S. V. Afanasyev,
G. N. Agakishiev,
E. Alpatov,
G. Altsybeev,
M. Alvarado Hernández,
S. V. Andreeva,
T. V. Andreeva,
E. V. Andronov,
N. V. Anfimov,
A. A. Aparin,
V. I. Astakhov,
E. Atkin,
T. Aushev,
G. S. Averichev,
A. V. Averyanov,
A. Ayala,
V. A. Babkin,
T. Babutsidze,
I. A. Balashov,
A. Bancer,
M. Yu. Barabanov,
D. A. Baranov
, et al. (454 additional authors not shown)
Abstract:
The Nuclotron-base Ion Collider fAcility (NICA) is under construction at the Joint Institute for Nuclear Research (JINR), with commissioning of the facility expected in late 2022. The Multi-Purpose Detector (MPD) has been designed to operate at NICA and its components are currently in production. The detector is expected to be ready for data taking with the first beams from NICA. This document pro…
▽ More
The Nuclotron-base Ion Collider fAcility (NICA) is under construction at the Joint Institute for Nuclear Research (JINR), with commissioning of the facility expected in late 2022. The Multi-Purpose Detector (MPD) has been designed to operate at NICA and its components are currently in production. The detector is expected to be ready for data taking with the first beams from NICA. This document provides an overview of the landscape of the investigation of the QCD phase diagram in the region of maximum baryonic density, where NICA and MPD will be able to provide significant and unique input. It also provides a detailed description of the MPD set-up, including its various subsystems as well as its support and computing infrastructures. Selected performance studies for particular physics measurements at MPD are presented and discussed in the context of existing data and theoretical expectations.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Conceptual design of the Spin Physics Detector
Authors:
V. M. Abazov,
V. Abramov,
L. G. Afanasyev,
R. R. Akhunzyanov,
A. V. Akindinov,
N. Akopov,
I. G. Alekseev,
A. M. Aleshko,
V. Yu. Alexakhin,
G. D. Alexeev,
M. Alexeev,
A. Amoroso,
I. V. Anikin,
V. F. Andreev,
V. A. Anosov,
A. B. Arbuzov,
N. I. Azorskiy,
A. A. Baldin,
V. V. Balandina,
E. G. Baldina,
M. Yu. Barabanov,
S. G. Barsov,
V. A. Baskov,
A. N. Beloborodov,
I. N. Belov
, et al. (270 additional authors not shown)
Abstract:
The Spin Physics Detector, a universal facility for studying the nucleon spin structure and other spin-related phenomena with polarized proton and deuteron beams, is proposed to be placed in one of the two interaction points of the NICA collider that is under construction at the Joint Institute for Nuclear Research (Dubna, Russia). At the heart of the project there is huge experience with polarize…
▽ More
The Spin Physics Detector, a universal facility for studying the nucleon spin structure and other spin-related phenomena with polarized proton and deuteron beams, is proposed to be placed in one of the two interaction points of the NICA collider that is under construction at the Joint Institute for Nuclear Research (Dubna, Russia). At the heart of the project there is huge experience with polarized beams at JINR.
The main objective of the proposed experiment is the comprehensive study of the unpolarized and polarized gluon content of the nucleon. Spin measurements at the Spin Physics Detector at the NICA collider have bright perspectives to make a unique contribution and challenge our understanding of the spin structure of the nucleon. In this document the Conceptual Design of the Spin Physics Detector is presented.
△ Less
Submitted 2 February, 2022; v1 submitted 31 January, 2021;
originally announced February 2021.
-
Effect of a Microscopic Roughness on Biological Adhesion of a Spherical Capsule
Authors:
Aleksey V. Belyaev
Abstract:
By means of computer simulations, this work addresses adhesion of a deformable spherical capsule to a micro-rough surface consisting of a periodic array of pillars. Depending on the micro-relief topography, three different adhesion regimes have been observed: 1) weak adhesion without deformation of the membrane (fakir state); 2) strong adhesion with deformation of the capsule membrane and binding…
▽ More
By means of computer simulations, this work addresses adhesion of a deformable spherical capsule to a micro-rough surface consisting of a periodic array of pillars. Depending on the micro-relief topography, three different adhesion regimes have been observed: 1) weak adhesion without deformation of the membrane (fakir state); 2) strong adhesion with deformation of the capsule membrane and binding to the bottom wall (nested or contacting state); 3) impalement of the capsule by micropillars. It has been found that a periodic micro-relief implies a favorable positioning of the capsule on rough surfaces.
△ Less
Submitted 6 October, 2018;
originally announced October 2018.
-
Long ligands reinforce biological adhesion under shear flow
Authors:
Aleksey V. Belyaev
Abstract:
In this work the computer modeling has been used to show that longer ligands allow biological cells (e.g., blood platelets) to withstand stronger flows after their adhesion to solid walls. Mechanistic model of polymer-mediated ligand-receptor adhesion between a microparticle (cell) and a flat wall has been developed. Theoretical threshold between adherent and non-adherent regimes has been derived…
▽ More
In this work the computer modeling has been used to show that longer ligands allow biological cells (e.g., blood platelets) to withstand stronger flows after their adhesion to solid walls. Mechanistic model of polymer-mediated ligand-receptor adhesion between a microparticle (cell) and a flat wall has been developed. Theoretical threshold between adherent and non-adherent regimes has been derived analytically and confirmed by simulations. These results lead to a deeper understanding of numerous biophysical processes, e.g., arterial thrombosis, and to the design of new biomimetic colloid-polymer systems.
△ Less
Submitted 29 March, 2018; v1 submitted 17 March, 2018;
originally announced March 2018.
-
Electro-hydrodynamics near Hydrophobic Surfaces
Authors:
S. R. Maduar,
A. V. Belyaev,
V. Lobaskin,
O. I. Vinogradova
Abstract:
We show that an electro-osmotic flow near the slippery hydrophobic surface depends strongly on the mobility of surface charges, which are balanced by counter-ions of the electrostatic diffuse layer. For a hydrophobic surface with immobile charges the fluid transport is considerably amplified by the existence of a hydrodynamic slippage. In contrast, near the hydrophobic surface with mobile adsorbed…
▽ More
We show that an electro-osmotic flow near the slippery hydrophobic surface depends strongly on the mobility of surface charges, which are balanced by counter-ions of the electrostatic diffuse layer. For a hydrophobic surface with immobile charges the fluid transport is considerably amplified by the existence of a hydrodynamic slippage. In contrast, near the hydrophobic surface with mobile adsorbed charges it is also controlled by an additional electric force, which increases the shear stress at the slipping interface. To account for this, we formulate electro-hydrodynamic boundary conditions at the slipping interface, which should be applied to quantify electro-osmotic flows instead of hydrodynamic boundary conditions. Our theoretical predictions are fully supported by dissipative particle dynamics simulations with explicit charges. These results lead to a new interpretation of zeta-potential of hydrophobic surfaces.
△ Less
Submitted 20 February, 2015; v1 submitted 15 October, 2014;
originally announced October 2014.
-
Threshold of microvascular occlusion: injury size defines the thrombosis scenario
Authors:
Aleksey V. Belyaev,
Mikhail A. Panteleev,
Fazly I. Ataullakhanov
Abstract:
Damage to the blood vessel triggers formation of a hemostatic plug, which is meant to prevent bleeding, yet the same phenomenon may result in a total blockade of a blood vessel by a thrombus, causing severe medical conditions. Here, we show that the physical interplay between platelet adhesion and hemodynamics in a microchannel manifests in a critical threshold behavior of a growing thrombus. Depe…
▽ More
Damage to the blood vessel triggers formation of a hemostatic plug, which is meant to prevent bleeding, yet the same phenomenon may result in a total blockade of a blood vessel by a thrombus, causing severe medical conditions. Here, we show that the physical interplay between platelet adhesion and hemodynamics in a microchannel manifests in a critical threshold behavior of a growing thrombus. Depending on the size of injury, two distinct dynamic pathways of thrombosis were found: the formation of a nonocclusive plug, if injury length does not exceed the critical value, and the total occlusion of the vessel by the thrombus otherwise. We develop a mathematical model that demonstrates that switching between these regimes occurs as a result of a saddle-node bifurcation. Our study reveals the mechanism of self-regulation of thrombosis in blood microvessels and explains experimentally observed distinctions between thrombi of different physical etiology. This also can be useful for the design of platelet-aggregation-inspired engineering solutions.
△ Less
Submitted 21 July, 2015; v1 submitted 23 August, 2014;
originally announced August 2014.
-
Anisotropic flow in striped superhydrophobic channels
Authors:
Jiajia Zhou,
Aleksey V. Belyaev,
Friederike Schmid,
Olga I. Vinogradova
Abstract:
We report results of dissipative particle dynamics simulations and develop a semi-analytical theory of an anisotropic flow in a parallel-plate channel with two superhydrophobic striped walls. Our approach is valid for any local slip at the gas sectors and an arbitrary distance between the plates, ranging from a thick to a thin channel. It allows us to optimize area fractions, slip lengths, channel…
▽ More
We report results of dissipative particle dynamics simulations and develop a semi-analytical theory of an anisotropic flow in a parallel-plate channel with two superhydrophobic striped walls. Our approach is valid for any local slip at the gas sectors and an arbitrary distance between the plates, ranging from a thick to a thin channel. It allows us to optimize area fractions, slip lengths, channel thickness and texture orientation to maximize a transverse flow. Our results may be useful for extracting effective slip tensors from global measurements, such as the permeability of a channel, in experiments or simulations, and may also find applications in passive microfluidic mixing.
△ Less
Submitted 2 May, 2012; v1 submitted 6 April, 2012;
originally announced April 2012.
-
Tensorial slip of super-hydrophobic channels
Authors:
Sebastian Schmieschek,
Aleksey V. Belyaev,
Jens Harting,
Olga I. Vinogradova
Abstract:
We describe a generalization of the tensorial slip boundary condition, originally justified for a thick (compared to texture period) channel, to any channel thickness. The eigenvalues of the effective slip length tensor, however, in general case become dependent on the gap and cannot be viewed as a local property of the surface, being a global characteristic of the channel. To illustrate the use o…
▽ More
We describe a generalization of the tensorial slip boundary condition, originally justified for a thick (compared to texture period) channel, to any channel thickness. The eigenvalues of the effective slip length tensor, however, in general case become dependent on the gap and cannot be viewed as a local property of the surface, being a global characteristic of the channel. To illustrate the use of the tensor formalism we develop a semi-analytical theory of an effective slip in a parallel-plate channel with one super-hydrophobic striped and one hydrophilic surface. Our approach is valid for any local slip at the gas sectors and an arbitrary distance between the plates, ranging from a thick to a thin channel. We then present results of lattice Boltzmann simulations to validate the analysis. Our results may be useful for extracting effective slip tensors from global measurements, such as the permeability of a channel, in experiments or simulations.
△ Less
Submitted 10 January, 2012; v1 submitted 2 September, 2011;
originally announced September 2011.
-
Drag force on a sphere moving towards an anisotropic super-hydrophobic plane
Authors:
Evgeny S. Asmolov,
Aleksey V. Belyaev,
Olga I. Vinogradova
Abstract:
We analyze theoretically a high-speed drainage of liquid films squeezed between a hydrophilic sphere and a textured super-hydrophobic plane, that contains trapped gas bubbles. A super-hydrophobic wall is characterized by parameters $L$ (texture characteristic length), $b_1$ and $b_2$ (local slip lengths at solid and gas areas), and $φ_1$ and $φ_2$ (fractions of solid and gas areas). Hydrodynamic p…
▽ More
We analyze theoretically a high-speed drainage of liquid films squeezed between a hydrophilic sphere and a textured super-hydrophobic plane, that contains trapped gas bubbles. A super-hydrophobic wall is characterized by parameters $L$ (texture characteristic length), $b_1$ and $b_2$ (local slip lengths at solid and gas areas), and $φ_1$ and $φ_2$ (fractions of solid and gas areas). Hydrodynamic properties of the plane are fully expressed in terms of the effective slip-length tensor with eigenvalues that depend on texture parameters and $H$ (local separation). The effect of effective slip is predicted to decrease the force as compared with expected for two hydrophilic surfaces and described by the Taylor equation. The presence of additional length scales, $L$, $b_1$ and $b_2$, implies that a film drainage can be much richer than in case of a sphere moving towards a hydrophilic plane. For a large (compared to $L$) gap the reduction of the force is small, and for all textures the force is similar to expected when a sphere is moving towards a smooth hydrophilic plane that is shifted down from the super-hydrophobic wall. The value of this shift is equal to the average of the eigenvalues of the slip-length tensor. By analyzing striped super-hydrophobic surfaces, we then compute the correction to the Taylor equation for an arbitrary gap. We show that at thinner gap the force reduction becomes more pronounced, and that it depends strongly on the fraction of the gas area and local slip lengths. For small separations we derive an exact equation, which relates a correction for effective slip to texture parameters. Our analysis provides a framework for interpreting recent force measurements in the presence of super-hydrophobic surface.
△ Less
Submitted 1 June, 2011;
originally announced June 2011.
-
Electro-osmosis on anisotropic super-hydrophobic surfaces
Authors:
Aleksey V. Belyaev,
Olga I. Vinogradova
Abstract:
We give a general theoretical description of electro-osmotic flow at striped super-hydrophobic surfaces in a thin double layer limit, and derive a relation between the electro-osmotic mobility and hydrodynamic slip-length tensors. Our analysis demonstrates that electro-osmotic flow shows a very rich behavior controlled by slip length and charge at the gas sectors. In case of uncharged liquid-gas i…
▽ More
We give a general theoretical description of electro-osmotic flow at striped super-hydrophobic surfaces in a thin double layer limit, and derive a relation between the electro-osmotic mobility and hydrodynamic slip-length tensors. Our analysis demonstrates that electro-osmotic flow shows a very rich behavior controlled by slip length and charge at the gas sectors. In case of uncharged liquid-gas interface, the flow is the same or inhibited relative to flow in homogeneous channel with zero interfacial slip. By contrast, it can be amplified by several orders of magnitude provided slip regions are uniformly charged. When gas and solid regions are oppositely charged, we predict a flow reversal, which suggests a possibility of huge electro-osmotic slip even for electro-neutral surfaces. On the basis of these observations we suggest strategies for practical microfluidic mixing devices. These results provide a framework for the rational design of super-hydrophobic surfaces.
△ Less
Submitted 20 July, 2011; v1 submitted 16 March, 2011;
originally announced March 2011.
-
Wetting, roughness and hydrodynamic slip
Authors:
Olga I. Vinogradova,
Aleksey V. Belyaev
Abstract:
The hydrodynamic slippage at a solid-liquid interface is currently at the center of our understanding of fluid mechanics. For hundreds of years this science has relied upon no-slip boundary conditions at the solid-liquid interface that has been applied successfully to model many macroscopic experiments, and the state of this interface has played a minor role in determining the flow. However, the p…
▽ More
The hydrodynamic slippage at a solid-liquid interface is currently at the center of our understanding of fluid mechanics. For hundreds of years this science has relied upon no-slip boundary conditions at the solid-liquid interface that has been applied successfully to model many macroscopic experiments, and the state of this interface has played a minor role in determining the flow. However, the problem is not that simple and has been revisited recently. Due to the change in the properties of the interface, such as wettability and roughness, this classical boundary condition could be violated, leading to a hydrodynamic slip. In this chapter, we review recent advances in the understanding and expectations for the hydrodynamic boundary conditions in different situations, by focussing mostly on key papers from past decade. We highlight mostly the impact of hydrophobicity, roughness, and especially their combination on the flow properties. In particular, we show that hydrophobic slippage can be dramatically affected by the presence of roughness, by inducing novel hydrodynamic phenomena, such as giant interfacial slip, superfluidity, mixing, and low hydrodynamic drag. Promising directions for further research are also discussed.
△ Less
Submitted 6 June, 2011; v1 submitted 27 December, 2010;
originally announced December 2010.
-
Wetting, roughness and flow boundary conditions
Authors:
Olga I. Vinogradova,
Aleksey V. Belyaev
Abstract:
We discuss how the wettability and roughness of a solid impacts its hydrodynamic properties. We see in particular that hydrophobic slippage can be dramatically affected by the presence of roughness. Owing to the development of refined methods for setting very well-controlled micro- or nanotextures on a solid, these effects are being exploited to induce novel hydrodynamic properties, such as giant…
▽ More
We discuss how the wettability and roughness of a solid impacts its hydrodynamic properties. We see in particular that hydrophobic slippage can be dramatically affected by the presence of roughness. Owing to the development of refined methods for setting very well-controlled micro- or nanotextures on a solid, these effects are being exploited to induce novel hydrodynamic properties, such as giant interfacial slip, superfluidity, mixing, and low hydrodynamic drag, that could not be achieved without roughness.
△ Less
Submitted 29 January, 2011; v1 submitted 24 September, 2010;
originally announced September 2010.
-
Hydrodynamic interaction with super-hydrophobic surfaces
Authors:
Aleksey V. Belyaev,
Olga I. Vinogradova
Abstract:
Patterned surfaces with large effective slip lengths, such as super-hydrophobic surfaces containing trapped gas bubbles, have the potential to reduce hydrodynamic drag. Based on lubrication theory, we analyze an approach of a hydrophilic disk to such a surface. The drag force is predicted analytically and formulated in terms of a correction function to the Reynolds equation, which is shown to be t…
▽ More
Patterned surfaces with large effective slip lengths, such as super-hydrophobic surfaces containing trapped gas bubbles, have the potential to reduce hydrodynamic drag. Based on lubrication theory, we analyze an approach of a hydrophilic disk to such a surface. The drag force is predicted analytically and formulated in terms of a correction function to the Reynolds equation, which is shown to be the harmonic mean of corrections expressed through effective slip lengths in the two principal (fastest and slowest) orthogonal directions. The reduction of drag is especially pronounced for a thin (compared to texture period) gap. It is not really sensitive to the pattern geometry, but depends strongly on the fraction of the gas phase and local slip length at the gas area.
△ Less
Submitted 7 May, 2010; v1 submitted 6 April, 2010;
originally announced April 2010.
-
Effective slip in pressure-driven flow past super-hydrophobic stripes
Authors:
Aleksey V. Belyaev,
Olga I. Vinogradova
Abstract:
Super-hydrophobic array of grooves containing trapped gas (stripes), have the potential to greatly reduce drag and enhance mixing phenomena in microfluidic devices. Recent work has focused on idealized cases of stick-perfect slip stripes, with limited guidance. Here, we analyze the experimentally relevant situation of a pressure-driven flow past striped slip-stick surfaces with arbitrary local s…
▽ More
Super-hydrophobic array of grooves containing trapped gas (stripes), have the potential to greatly reduce drag and enhance mixing phenomena in microfluidic devices. Recent work has focused on idealized cases of stick-perfect slip stripes, with limited guidance. Here, we analyze the experimentally relevant situation of a pressure-driven flow past striped slip-stick surfaces with arbitrary local slip at the gas sectors. We derive analytical formulas for maximal (longitudinal) and minimal (transverse) directional effective slip lengths that can be used for any surface slip fraction (validated by numerical calculations). By representing eigenvalues of the slip length-tensor, they allow us to obtain the effective slip for any orientation of stripes with respect to the mean flow. Our results imply that flow past stripes is controlled by the ratio of the local slip length to texture size. In case of a large (compared to the texture period) slip at the gas areas, surface anisotropy leads to a tensorial effective slip, by attaining the values predicted earlier for a perfect local slip. Both effective slip lengths and anisotropy of the flow decrease when local slip becomes of the order of texture period. In the case of small slip, we predict simple surface-averaged, isotropic flows (independent of orientation). These results provide a framework for the rational design of super-hydrophobic surfaces and devices.
△ Less
Submitted 11 January, 2010; v1 submitted 8 December, 2009;
originally announced December 2009.
