-
Multiphase Flow Simulation of Blow-by and Fuel-in-Oil Dilution via the Piston Ring Pack Using the CFD Level-Set Method
Authors:
Patrick Antony,
Norbert Hosters,
Marek Behr,
Anselm Hopf,
Frank Krämer,
Carsten Weber,
Paul Turner
Abstract:
Modern diesel engines temporarily use a very late post-injection in the combustion cycle to either generate heat for a diesel particulate filter regeneration or purge a lean NOx trap. In some configurations, unburned fuel is left at the cylinder walls and is transported via the piston rings toward the lower crankcase region, where fuel may dilute the oil. Reduced oil lubrication shortens the oil s…
▽ More
Modern diesel engines temporarily use a very late post-injection in the combustion cycle to either generate heat for a diesel particulate filter regeneration or purge a lean NOx trap. In some configurations, unburned fuel is left at the cylinder walls and is transported via the piston rings toward the lower crankcase region, where fuel may dilute the oil. Reduced oil lubrication shortens the oil service intervals and increases friction. Beside diesel fuel, this problem may also occur for other types of liquid fuels such as alcohols and e-fuels. The exact transport mechanism of the unburned fuel via the piston ring pack grooves and cylinder wall is hard to measure experimentally, motivating numerical flow simulation in early design stages for an in-depth understanding of the involved processes. A new CFD simulation methodology has been developed to investigate the transient, compressible, multiphase flow around the piston ring pack, through the gap between piston and liner, and its impact on fuel or oil transport. The modern level-set approach is used for the multiphase physics, which directly captures the sharp interface between blow-by gas and fuel or oil. Transient blow-by and two-phase flow simulations have been extensively applied to a Ford 2.0L I4 diesel test engine. The results confirm the validity of the flow compressibility assumption and highlight the sensitivity of the fuel leakage regarding piston sealing ring movement and highly resolved meshes for the multiphase flow. Based on the simulation results, design recommendations for piston and piston ring geometry are provided to reduce the fuel transport toward the crankcase.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Eulerian Formulation of the Tensor-Based Morphology Equations for Strain-Based Blood Damage Modeling
Authors:
Nico Dirkes,
Fabian Key,
Marek Behr
Abstract:
The development of blood-handling medical devices, such as ventricular assist devices, requires the analysis of their biocompatibility. Among other aspects, this includes hemolysis, i.e., red blood cell damage. For this purpose, computational fluid dynamics (CFD) methods are employed to predict blood flow in prototypes. The most basic hemolysis models directly estimate red blood cell damage from f…
▽ More
The development of blood-handling medical devices, such as ventricular assist devices, requires the analysis of their biocompatibility. Among other aspects, this includes hemolysis, i.e., red blood cell damage. For this purpose, computational fluid dynamics (CFD) methods are employed to predict blood flow in prototypes. The most basic hemolysis models directly estimate red blood cell damage from fluid stress in the resulting flow field. More advanced models explicitly resolve cell deformation. On the downside, these models are typically written in a Lagrangian formulation, i.e., they require pathline tracking. We present a new Eulerian description of cell deformation, enabling the evaluation of the solution across the whole domain. The resulting hemolysis model can be applied to any converged CFD simulation due to one-way coupling with the fluid velocity field. We discuss the efficient numerical treatment of the model equations in a stabilized finite element context. We verify the model by comparison to the original Lagrangian formulation in selected benchmark flows. Two more complex test cases demonstrate the method's capabilities in real-world applications. The results highlight the advantages over previous hemolysis models. In conclusion, the model holds great potential for the design process of future generations of medical devices.
△ Less
Submitted 11 April, 2024; v1 submitted 14 February, 2024;
originally announced February 2024.
-
In-silico Analysis of Hemodynamic Indicators in Idealized Stented Coronary Arteries for Varying Stent Indentation
Authors:
Anna Ranno,
Kiran Manjunatha,
Anne Glitz,
Nicole Schaaps,
Stefanie Reese,
Felix Vogt,
Marek Behr
Abstract:
In this work, we investigate the effects of stent indentation on hemodynamic indicators in stented coronary arteries. Our aim is to assess in-silico risk factors for in-stent restenosis (ISR) and thrombosis after stent implantation. The proposed model is applied to an idealized artery with Xience V stent for four indentation percentages and three mesh refinements. We analyze the patterns of hemody…
▽ More
In this work, we investigate the effects of stent indentation on hemodynamic indicators in stented coronary arteries. Our aim is to assess in-silico risk factors for in-stent restenosis (ISR) and thrombosis after stent implantation. The proposed model is applied to an idealized artery with Xience V stent for four indentation percentages and three mesh refinements. We analyze the patterns of hemodynamic indicators arising from different stent indentations and propose an empirical frequency analysis of time-averaged WSS (TAWSS), oscillatory shear index (OSI), and relative residence time (RRT). We observe that higher indentations display higher frequency of critically low TAWSS and non-physiological OSI and RRT. Furthermore, an appropriate mesh refinement is needed for accurate representation of hemodynamics in the stent vicinity. The results provide physics-based evidence for the correlation between high indentation and ISR.
△ Less
Submitted 14 January, 2024;
originally announced January 2024.
-
In silico reproduction of the pathophysiology of in-stent restenosis
Authors:
Kiran Manjunatha,
Anna Ranno,
Jianye Shi,
Nicole Schaaps,
Pakhwan Nilcham,
Anne Cornelissen,
Felix Vogt,
Marek Behr,
Stefanie Reese
Abstract:
The occurrence of in-stent restenosis following percutaneous coronary intervention highlights the need for the creation of computational tools that can extract pathophysiological insights and optimize interventional procedures on a patient-specific basis. In light of this, a comprehensive framework encompassing multiple physical phenomena is introduced in this work. This framework effectively capt…
▽ More
The occurrence of in-stent restenosis following percutaneous coronary intervention highlights the need for the creation of computational tools that can extract pathophysiological insights and optimize interventional procedures on a patient-specific basis. In light of this, a comprehensive framework encompassing multiple physical phenomena is introduced in this work. This framework effectively captures the intricate interplay of chemical, mechanical, and biological factors. In addition, computational approaches for the extraction of hemodynamic indicators that modulate the severity of the restenotic process are devised. Thus, this marks a significant stride towards facilitating computer-assisted clinical methodologies.
△ Less
Submitted 7 May, 2024; v1 submitted 8 January, 2024;
originally announced January 2024.
-
Exploring the Influence of Parametrized Pulsatility on Left Ventricular Washout under LVAD Support: A Computational Study Using Reduced-Order Models
Authors:
Maximilian R. Schuster,
Nico Dirkes,
Fabian Key,
Stefanie Elgeti,
Marek Behr
Abstract:
Medical therapy for patients with severe heart disease often relies on left ventricular assist devices (LVADs). It is an ongoing topic of research how complications like stagnation and thrombosis can be prevented by using artificial pulsatility. We study a parametric pulse profile and its effect on the left ventricular washout using a computational flow model. Based on finite element simulations,…
▽ More
Medical therapy for patients with severe heart disease often relies on left ventricular assist devices (LVADs). It is an ongoing topic of research how complications like stagnation and thrombosis can be prevented by using artificial pulsatility. We study a parametric pulse profile and its effect on the left ventricular washout using a computational flow model. Based on finite element simulations, we construct reduced-order models to reduce the computational costs for evaluating the parametrized problem. We observe that a pulsatile flow rate improves the washout compared to a constant flow rate. In particular, we find that short, intense pulses wash out the left ventricle best, whereas the time between subsequent pulses plays no significant role.
△ Less
Submitted 28 March, 2025; v1 submitted 11 October, 2023;
originally announced October 2023.
-
Numerical Prediction and Post-Test Numerical Analysis of the ASDMAD Wind Tunnel Tests in ETW
Authors:
Manuel Brüderlin,
Norbert Hosters,
Bae-Hong Chen,
Alexander Boucke,
Josef Ballmann,
Marek Behr
Abstract:
This paper presents numerical results in comparison with experimental data of nominally static aeroelastic polars of the second ASDMAD (Aero-Structural Dynamics Methods for Airplane Design) campaign conducted in the European Transonic Windtunnel. For the simulation the modular solver package SOFIA combined with the DLR solver TAU on the fluid side and the in-house solver FEAFA on the structural si…
▽ More
This paper presents numerical results in comparison with experimental data of nominally static aeroelastic polars of the second ASDMAD (Aero-Structural Dynamics Methods for Airplane Design) campaign conducted in the European Transonic Windtunnel. For the simulation the modular solver package SOFIA combined with the DLR solver TAU on the fluid side and the in-house solver FEAFA on the structural side is applied. First the experimental setup and the aeroelastic solver are introduced, followed by a detailed analysis of the results. Comparisons of pressure distributions and the global lift coefficients are presented for variations of angle of attack, Mach number and aerodynamic loading factor. Additionally, the paper contains preliminary investigations of dynamic results for excited vibration applying periodical inner force couples in the wing root area.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Loading and relaxation dynamics of a red blood cell
Authors:
Fabio Guglietta,
Marek Behr,
Giacomo Falcucci,
Mauro Sbragaglia
Abstract:
We use mesoscale numerical simulations to investigate the unsteady dynamics of a single red blood cell (RBC) subjected to an external mechanical load. We carry out a detailed comparison between the {\it loading} (L) dynamics, following the imposition of the mechanical load on the RBC at rest, and the {\it relaxation} (R) dynamics, allowing the RBC to relax to its original shape after the sudden ar…
▽ More
We use mesoscale numerical simulations to investigate the unsteady dynamics of a single red blood cell (RBC) subjected to an external mechanical load. We carry out a detailed comparison between the {\it loading} (L) dynamics, following the imposition of the mechanical load on the RBC at rest, and the {\it relaxation} (R) dynamics, allowing the RBC to relax to its original shape after the sudden arrest of the mechanical load. Such a comparison is carried out by analyzing the characteristic times of the two corresponding dynamics, i.e., $t_L$ and $t_R$. When the intensity of the mechanical load is small enough, the two kinds of dynamics are {\it symmetrical} ($t_L \approx t_R$) and independent of the typology of mechanical load (intrinsic dynamics); otherwise, in marked contrast, an {\it asymmetry} is found, wherein the loading dynamics is typically faster than the relaxation one. This asymmetry manifests itself with non-universal characteristics, e.g., dependency on the applied load and/or on the viscoelastic properties of the RBC membrane. To deepen such a non-universal behaviour, we consider the viscosity of the erythrocyte membrane as a variable parameter and focus on three different typologies of mechanical load (mechanical stretching, shear flow, elongational flow): this allows to clarify how non-universality builds up in terms of the deformation and rotational contributions induced by the mechanical load on the membrane. Finally, we also investigate the effect of the elastic shear modulus on the characteristic times $t_L$ and $t_R$. Our results provide crucial and quantitative information on the unsteady dynamics of RBC and its membrane response to the imposition/cessation of external mechanical loads.
△ Less
Submitted 31 May, 2021; v1 submitted 17 February, 2021;
originally announced February 2021.
-
Lattice Boltzmann simulations on the tumbling to tank-treading transition: effects of membrane viscosity
Authors:
Fabio Guglietta,
Marek Behr,
Luca Biferale,
Giacomo Falcucci,
Mauro Sbragaglia
Abstract:
The tumbling to tank-treading (TB-TT) transition for red blood cells (RBCs) has been widely investigated, with a main focus on the effects of the viscosity ratio $λ$ (i.e., the ratio between the viscosities of the fluids inside and outside the membrane) and the shear rate $\dotγ$ applied to the RBC. However, the membrane viscosity $μ_m$ plays a major role in a realistic description of RBC's dynami…
▽ More
The tumbling to tank-treading (TB-TT) transition for red blood cells (RBCs) has been widely investigated, with a main focus on the effects of the viscosity ratio $λ$ (i.e., the ratio between the viscosities of the fluids inside and outside the membrane) and the shear rate $\dotγ$ applied to the RBC. However, the membrane viscosity $μ_m$ plays a major role in a realistic description of RBC's dynamics, and only a few works have systematically focused on its effects on the TB-TT transition. In this work, we provide a parametric investigation on the effect of membrane viscosity $μ_m$ on the TB-TT transition, for a single RBC. It is found that, at fixed viscosity ratios $λ$, larger values of $μ_m$ lead to an increased range of values of capillary number at which the TB-TT transition occurs. We systematically quantify such an increase by means of mesoscale numerical simulations based on the lattice Boltzmann models.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.
-
On the effects of membrane viscosity on transient red blood cell dynamics
Authors:
F. Guglietta,
M. Behr,
L. Biferale,
G. Falcucci,
M. Sbragaglia
Abstract:
Computational Fluid Dynamics (CFD) is currently used to design and improve the hydraulic properties of biomedical devices, wherein the large scale blood circulation needs to be simulated by accounting for the mechanical response of red blood cells (RBCs) at mesoscales. In many practical instances, biomedical devices work on time-scales comparable to the intrinsic relaxation time of RBCs: thus, a s…
▽ More
Computational Fluid Dynamics (CFD) is currently used to design and improve the hydraulic properties of biomedical devices, wherein the large scale blood circulation needs to be simulated by accounting for the mechanical response of red blood cells (RBCs) at mesoscales. In many practical instances, biomedical devices work on time-scales comparable to the intrinsic relaxation time of RBCs: thus, a systematic understanding of the time-dependent response of erythrocyte membranes is crucial for the effective design of such devices. So far, this information has been deduced from experimental data, which do not necessarily adapt to the the broad variety of the fluid dynamic conditions that can be encountered in practice. This work explores the novel possibility of studying the time-dependent response of an erythrocyte membrane to external mechanical loads via ab-initio, mesoscale numerical simulations, with a primary focus on the detailed characterisation of the RBC relaxation time $t_c$ following the arrest of the external mechanical load. The adopted mesoscale model exploits a hybrid Immersed Boundary-Lattice Boltzmann Method (IB-LBM), coupled with the Standard Linear Solid model (SLS) to account for the RBC membrane viscosity. We underscore the key importance of the 2D membrane viscosity $μ_{m}$ to correctly reproduce the relaxation time of the RBC membrane. A detailed assessment of the dependencies on the typology and strength of the applied mechanical loads is also provided. Overall, our findings open interesting future perspectives for the study of the non-linear response of RBCs immersed in time-dependent strain fields.
△ Less
Submitted 23 December, 2024; v1 submitted 8 April, 2020;
originally announced April 2020.
-
Finite-Element Formulation for Advection-Reaction Equations with Change of Variable and Discontinuity Capturing
Authors:
Stefan Haßler,
Anna Maria Ranno,
Marek Behr
Abstract:
We propose a change of variable approach and discontinuity capturing methods to ensure physical constraints for advection-reaction equations discretized by the finite element method. This change of variable confines the concentration below an upper bound in a very natural way. For the non-negativity constraint, we propose to use a discontinuity capturing method defined on the reference element tha…
▽ More
We propose a change of variable approach and discontinuity capturing methods to ensure physical constraints for advection-reaction equations discretized by the finite element method. This change of variable confines the concentration below an upper bound in a very natural way. For the non-negativity constraint, we propose to use a discontinuity capturing method defined on the reference element that is combined with an anisotropic crosswind-dissipation operator. This discontinuity capturing cannot completely eliminate negative values but effectively minimizes their occurrence. The proposed methods are applied to different biophysical models and show a good agreement with experimental results for the FDA benchmark blood pump for a physiological red blood cell pore formation model.
△ Less
Submitted 15 March, 2020;
originally announced March 2020.
-
The Variational Multiscale Formulation for the Fully-Implicit Log-Morphology Equation as a Tensor-Based Blood Damage Model
Authors:
Stefan Haßler,
Lutz Pauli,
Marek Behr
Abstract:
We derive a variational multiscale (VMS) finite element formulation for a viscoelastic, tensor-based blood damage model. The tensor equation is numerically stabilized by a logarithmic shape tensor description that prevents unphysical, negative eigenvalues. The resulting VMS stabilization terms for this so-called log-morph equation are presented together with their special numerical treatment. Resu…
▽ More
We derive a variational multiscale (VMS) finite element formulation for a viscoelastic, tensor-based blood damage model. The tensor equation is numerically stabilized by a logarithmic shape tensor description that prevents unphysical, negative eigenvalues. The resulting VMS stabilization terms for this so-called log-morph equation are presented together with their special numerical treatment. Results for a 2D rotating stirrer test case obtained from log-morph simulations with both SUPG and VMS stabilization show significantly improved numerical behavior if compared with Galerkin/least squares (GLS) stabilized untransformed morphology simulation results. The newly proposed method is also successfully applied to a state-of-the-art centrifugal ventricular assist device (VAD), and clear advantages of the VMS stabilization compared to the SUPG stabilized formulation are presented.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.
-
Automatic implementation of material laws: Jacobian calculation in a finite element code with TAPENADE
Authors:
Florian Zwicke,
Philipp Knechtges,
Marek Behr,
Stefanie Elgeti
Abstract:
In an effort to increase the versatility of finite element codes, we explore the possibility of automatically creating the Jacobian matrix necessary for the gradient-based solution of nonlinear systems of equations. Particularly, we aim to assess the feasibility of employing the automatic differentiation tool TAPENADE for this purpose on a large Fortran codebase that is the result of many years of…
▽ More
In an effort to increase the versatility of finite element codes, we explore the possibility of automatically creating the Jacobian matrix necessary for the gradient-based solution of nonlinear systems of equations. Particularly, we aim to assess the feasibility of employing the automatic differentiation tool TAPENADE for this purpose on a large Fortran codebase that is the result of many years of continuous development. As a starting point we will describe the special structure of finite element codes and the implications that this code design carries for an efficient calculation of the Jacobian matrix. We will also propose a first approach towards improving the efficiency of such a method. Finally, we will present a functioning method for the automatic implementation of the Jacobian calculation in a finite element software, but will also point out important shortcomings that will have to be addressed in the future.
△ Less
Submitted 21 February, 2017;
originally announced February 2017.
-
An ultraweak DPG method for viscoelastic fluids
Authors:
Brendan Keith,
Philipp Knechtges,
Nathan V. Roberts,
Stefanie Elgeti,
Marek Behr,
Leszek Demkowicz
Abstract:
We explore a vexing benchmark problem for viscoelastic fluid flows with the discontinuous Petrov-Galerkin (DPG) finite element method of Demkowicz and Gopalakrishnan [1,2]. In our analysis, we develop an intrinsic a posteriori error indicator which we use for adaptive mesh generation. The DPG method is useful for the problem we consider because the method is inherently stable---requiring no stabil…
▽ More
We explore a vexing benchmark problem for viscoelastic fluid flows with the discontinuous Petrov-Galerkin (DPG) finite element method of Demkowicz and Gopalakrishnan [1,2]. In our analysis, we develop an intrinsic a posteriori error indicator which we use for adaptive mesh generation. The DPG method is useful for the problem we consider because the method is inherently stable---requiring no stabilization of the linearized discretization in order to handle the advective terms in the model. Because stabilization is a pressing issue in these models, this happens to become a very useful property of the method which simplifies our analysis. This built-in stability at all length scales and the a posteriori error indicator additionally allows for the generation of parameter-specific meshes starting from a common coarse initial mesh. A DPG discretization always produces a symmetric positive definite stiffness matrix. This feature allows us to use the most efficient direct solvers for all of our computations. We use the Camellia finite element software package [3,4] for all of our analysis.
△ Less
Submitted 26 June, 2017; v1 submitted 9 December, 2016;
originally announced December 2016.
-
Towards Automated Benchmarking of Atomistic Forcefields: Neat Liquid Densities and Static Dielectric Constants from the ThermoML Data Archive
Authors:
Kyle A. Beauchamp,
Julie M. Behr,
Ariën S. Rustenburg,
Christopher I. Bayly,
Kenneth Kroenlein,
John D. Chodera
Abstract:
Atomistic molecular simulations are a powerful way to make quantitative predictions, but the accuracy of these predictions depends entirely on the quality of the forcefield employed. While experimental measurements of fundamental physical properties offer a straightforward approach for evaluating forcefield quality, the bulk of this information has been tied up in formats that are not machine-read…
▽ More
Atomistic molecular simulations are a powerful way to make quantitative predictions, but the accuracy of these predictions depends entirely on the quality of the forcefield employed. While experimental measurements of fundamental physical properties offer a straightforward approach for evaluating forcefield quality, the bulk of this information has been tied up in formats that are not machine-readable. Compiling benchmark datasets of physical properties from non-machine-readable sources require substantial human effort and is prone to accumulation of human errors, hindering the development of reproducible benchmarks of forcefield accuracy. Here, we examine the feasibility of benchmarking atomistic forcefields against the NIST ThermoML data archive of physicochemical measurements, which aggregates thousands of experimental measurements in a portable, machine-readable, self-annotating format. As a proof of concept, we present a detailed benchmark of the generalized Amber small molecule forcefield (GAFF) using the AM1-BCC charge model against measurements (specifically bulk liquid densities and static dielectric constants at ambient pressure) automatically extracted from the archive, and discuss the extent of available data. The results of this benchmark highlight a general problem with fixed-charge forcefields in the representation low dielectric environments such as those seen in binding cavities or biological membranes.
△ Less
Submitted 31 May, 2015;
originally announced June 2015.
-
Transition Prediction for Scramjet Intakes Using the γ-Re_θ_t Model Coupled to Two Turbulence Models
Authors:
Sarah Frauholz,
Birgit U. Reinartz,
Siegfried Müller,
Marek Behr
Abstract:
Due to the thick boundary layers in hypersonic flows, the state of the boundary layer significantly influences the whole flow field as well as surface heat loads. Hence, for engineering applications the efficient numerical prediction of laminar-to-turbulent transition is a challenging and important task. Within the framework of the Reynolds averaged Navier-Stokes equations, Langtry/Menter [1] prop…
▽ More
Due to the thick boundary layers in hypersonic flows, the state of the boundary layer significantly influences the whole flow field as well as surface heat loads. Hence, for engineering applications the efficient numerical prediction of laminar-to-turbulent transition is a challenging and important task. Within the framework of the Reynolds averaged Navier-Stokes equations, Langtry/Menter [1] proposed the $γ$-$Re_{θ_t}$ transition model using two transport equations for the intermittency and $γ$-$Re_{θ_t}$ combined with the Shear Stress Transport turbulence model (SST) [2]. The transition model contains two empirical correlations for onset and length of transition. Langtry/Menter [1] designed and validated the correlations for the subsonic and transonic flow regime. For our applications in the hypersonic flow regime, the development of a new set of correlations proved necessary, even when using the same SST turbulence model [3]. Within this paper, we propose a next step and couple the transition model with the SSG/LRR-$ω$ Reynolds stress turbulence model [4] which we found to be well suited for scramjet intake simulations. First, we illustrate the necessary modifications of the Reynolds stress model and the hypersonic in-house correlations using a hypersonic flat plate test case. Next, the transition model is successfully validated for its use coupled to both turbulence models using a hypersonic double ramp test case. Regardless of the turbulence model, the transition model is able to correctly predict the transition process compared to experimental data. In addition, we apply the transition model combined with both turbulence models to three different fully 3D scramjet intake configurations which are experimentally investigated in wind tunnel facilities. The agreement with the available experimental data is also shown.
△ Less
Submitted 15 October, 2014;
originally announced October 2014.
-
Fully-implicit log-conformation formulation of constitutive laws
Authors:
Philipp Knechtges,
Marek Behr,
Stefanie Elgeti
Abstract:
Subject of this paper is the derivation of a new constitutive law in terms of the logarithm of the conformation tensor that can be used as a full substitute for the 2D governing equations of the Oldroyd-B, Giesekus and other models. One of the key features of these new equations is that - in contrast to the original log-conf equations given by Fattal and Kupferman (2004) - these constitutive equat…
▽ More
Subject of this paper is the derivation of a new constitutive law in terms of the logarithm of the conformation tensor that can be used as a full substitute for the 2D governing equations of the Oldroyd-B, Giesekus and other models. One of the key features of these new equations is that - in contrast to the original log-conf equations given by Fattal and Kupferman (2004) - these constitutive equations combined with the Navier-Stokes equations constitute a self-contained, non-iterative system of partial differential equations. In addition to its potential as a fruitful source for understanding the mathematical subtleties of the models from a new perspective, this analytical description also allows us to fully utilize the Newton-Raphson algorithm in numerical simulations, which by design should lead to reduced computational effort. By means of the confined cylinder benchmark we will show that a finite element discretization of these new equations delivers results of comparable accuracy to known methods.
△ Less
Submitted 11 December, 2014; v1 submitted 26 June, 2014;
originally announced June 2014.
-
Wavelet-based Adaptive Techniques Applied to Turbulent Hypersonic Scramjet Intake Flows
Authors:
Sarah Frauholz,
Arianna Bosco,
Birgit U. Reinartz,
Siegfried Müller,
Marek Behr
Abstract:
The simulation of hypersonic flows is computationally demanding due to large gradients of the flow variables caused by strong shock waves and thick boundary or shear layers. The resolution of those gradients imposes the use of extremely small cells in the respective regions. Taking turbulence into account intensives the variation in scales even more. Furthermore, hypersonic flows have been shown t…
▽ More
The simulation of hypersonic flows is computationally demanding due to large gradients of the flow variables caused by strong shock waves and thick boundary or shear layers. The resolution of those gradients imposes the use of extremely small cells in the respective regions. Taking turbulence into account intensives the variation in scales even more. Furthermore, hypersonic flows have been shown to be extremely grid sensitive. For the simulation of three-dimensional configurations of engineering applications, this results in a huge amount of cells and prohibitive computational time. Therefore, modern adaptive techniques can provide a gain with respect to computational costs and accuracy, allowing the generation of locally highly resolved flow regions where they are needed and retaining an otherwise smooth distribution. An h-adaptive technique based on wavelets is employed for the solution of hypersonic flows. The compressible Reynolds averaged Navier-Stokes equations are solved using a differential Reynolds stress turbulence model, well suited to predict shock-wave-boundary-layer interactions in high enthalpy flows. Two test cases are considered: a compression corner and a scramjet intake. The compression corner is a classical test case in hypersonic flow investigations because it poses a shock-wave-turbulent-boundary-layer interaction problem. The adaptive procedure is applied to a two-dimensional confguration as validation. The scramjet intake is firstly computed in two dimensions. Subsequently a three-dimensional geometry is considered. Both test cases are validated with experimental data and compared to non-adaptive computations. The results show that the use of an adaptive technique for hypersonic turbulent flows at high enthalpy conditions can strongly improve the performance in terms of memory and CPU time while at the same time maintaining the required accuracy of the results.
△ Less
Submitted 27 July, 2013;
originally announced July 2013.
