-
Development of ion-beam sputtered silicon nitride thin films for low-noise mirror coatings of gravitational-wave detectors
Authors:
A. Amato,
M. Bazzan,
G. Cagnoli,
M. Canepa,
M. Coulon,
J. Degallaix,
N. Demos,
A. Di Michele,
M. Evans,
F. Fabrizi,
G. Favaro,
D. Forest,
S. Gras,
D. Hofman,
A. Lemaitre,
G. Maggioni,
M. Magnozzi,
V. Martinez,
L. Mereni,
C. Michel,
V. Milotti,
M. Montani,
A. Paolone,
A. Pereira,
F. Piergiovanni
, et al. (10 additional authors not shown)
Abstract:
Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop lower-noise ion-beam sputtered silicon nitride thin films compliant with the very stringent requirements on optical loss of gravitational-wave interferometers.…
▽ More
Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop lower-noise ion-beam sputtered silicon nitride thin films compliant with the very stringent requirements on optical loss of gravitational-wave interferometers.
In order to test the hypothesis of a correlation between the synthesis conditions of the films and their elemental composition and optical and mechanical properties, we varied the voltage, current intensity and composition of the sputtering ion beam, and we performed a broad campaign of characterizations. While the refractive index was found to monotonically depend on the beam voltage and linearly vary with the N/Si ratio, the optical absorption appeared to be strongly sensitive to other factors, as yet unidentified. However, by systematically varying the deposition parameters, an optimal working point was found. Thus we show that the loss angle and extinction coefficient of our thin films can be as low as $(1.0 \pm 0.1) \times 10^{-4}$ rad at $\sim$2.8 kHz and $(6.4 \pm 0.2) \times 10^{-6}$ at 1064 nm, respectively, after thermal treatment at 900 $^{\circ}$C. To the best of our knowledge, such loss angle value is the lowest ever measured on this class of thin films.
We then used our silicon nitride thin films to design and produce a multi-material mirror coating showing a thermal noise amplitude of $(10.3 \pm 0.2) \times 10^{-18}$ m Hz$^{-1/2}$ at 100 Hz, which is 25\% lower than in current mirror coatings of the Advanced LIGO and Advanced Virgo interferometers, and an optical absorption as low as $(1.6 \pm 0.5)$ parts per million at 1064 nm.
△ Less
Submitted 10 February, 2025; v1 submitted 11 September, 2024;
originally announced September 2024.
-
Swarm of lightsail nanosatellites for Solar System exploration
Authors:
Giovanni Santi,
Alain J. Corso,
Denis Garoli,
Giuseppe Emanuele Lio,
Marco Manente,
Giulio Favaro,
Marco Bazzan,
Giampaolo Piotto,
Nicola Andriolli,
Lucanos Strambini,
Daniele Pavarin,
Leonardo Badia,
Remo Proietti Zaccaria,
Philip Lubin,
Roberto Ragazzoni,
Maria G. Pelizzo
Abstract:
This paper presents a study for the realization of a space mission which employs nanosatellites driven by an external laser source impinging on an optimized lightsail, as a valuable technology to launch swarms of spacecrafts into the Solar System. Nanosatellites propelled by laser can be useful for the heliosphere exploration and for planetary observation, if suitably equipped with sensors, or be…
▽ More
This paper presents a study for the realization of a space mission which employs nanosatellites driven by an external laser source impinging on an optimized lightsail, as a valuable technology to launch swarms of spacecrafts into the Solar System. Nanosatellites propelled by laser can be useful for the heliosphere exploration and for planetary observation, if suitably equipped with sensors, or be adopted for the establishment of network systems when placed into specific orbits. By varying the area-to-mass ratio (i.e., the ratio between the sail area and the payload weight) and the laser power, it is ossible to insert nanosatellites into different hyperbolic orbits with respect to Earth, thus reaching the target by means of controlled trajectories in a relatively short amount of time. A mission involving nanosatellites of the order of 1 kg of mass is envisioned, by describing all the on-board subsystems and satisfying all the requirements in term of power and mass budget. Particular attention is paid to the telecommunication subsystem, which must offer all the necessary functionalities. To fabricate the lightsail, the thin films technology has been considered, by verifying the sail thermal stability during the thrust phase. Moreover, the problem of mechanical stability of the lightsail has been tackled, showing that the distance between the ligthsail structure and the payload plays a pivotal role. Some potential applications of the proposed technology are discussed, such as the mapping of the heliospheric environment.
△ Less
Submitted 15 September, 2022; v1 submitted 23 August, 2022;
originally announced August 2022.
-
Characterization of ion-beam-sputtered AlF$_3$ thin films for gravitational-wave interferometers
Authors:
M. Bischi,
A. Amato,
M. Bazzan,
G. Cagnoli,
M. Canepa,
G. Favaro,
D. Forest,
P. Gobbi,
M. Granata,
G. M. Guidi,
G. Maggioni,
F. Martelli,
M. Menotta,
M. Montani,
F. Piergiovanni,
L. Valentini
Abstract:
Thermal noise in amorphous coatings is a limitation for a wide range of precision experiments such as gravitational-wave detectors (GWDs). Mirrors for GWDs are composed of multiple thin layers of dielectric materials deposited on a substrate: the stack is made of layers with a high refractive index interleaved with layers of a low refractive index. The goal is to obtain high reflectivity and low t…
▽ More
Thermal noise in amorphous coatings is a limitation for a wide range of precision experiments such as gravitational-wave detectors (GWDs). Mirrors for GWDs are composed of multiple thin layers of dielectric materials deposited on a substrate: the stack is made of layers with a high refractive index interleaved with layers of a low refractive index. The goal is to obtain high reflectivity and low thermal noise. In this paper we report on the optical and mechanical properties of ion-beam-sputtered aluminium fluoride (AlF$_3$) thin films which have one of the lowest refractive index among the known coating materials and we discuss their application in current and future GWDs.
△ Less
Submitted 9 June, 2022;
originally announced June 2022.
-
Measurement and simulation of mechanical and optical properties of sputtered amorphous SiC coatings
Authors:
G. Favaro,
A. Amato,
F. Arciprete,
M. Bazzan,
E. Cesarini,
F. De Matteis,
T. H. Dao,
M. Granata,
C. Honrado-Benítez,
N. Gutiérrez-Luna,
J. I. Larruquert,
G. Lorenzin,
D. Lumaca,
G. Maggioni,
M. Magnozzi,
E. Placidi,
P. Prosposito,
F. Puosi
Abstract:
In this work We report on the extensive characterization of amorphous silicon carbide (a-SiC) coatings prepared by physical deposition methods. We compare the results obtained on two different sputtering systems (a standard RF magnetron sputtering and a ion-beam assisted sputtering) to seize the impact of two different setups on the repeatably of the results.
After a thorough characterization of…
▽ More
In this work We report on the extensive characterization of amorphous silicon carbide (a-SiC) coatings prepared by physical deposition methods. We compare the results obtained on two different sputtering systems (a standard RF magnetron sputtering and a ion-beam assisted sputtering) to seize the impact of two different setups on the repeatably of the results.
After a thorough characterization of structural, morphological, and compositional characteristics of the prepared samples, we focus on a detailed study of the optical and mechanical losses in those materials. Mechanical losses are further investigated from a microscopic point of view by comparing our experimental results with molecular dynamic simulations of the amorphous SiC structure: first we define a protocol to generate a numerical model of the amorphous film, capturing the main features of the real system; then we simulate its dynamical behaviour upon deformation in order to obtain its mechanical response. Our results are discussed within the perspective application of a-SiC as an optical material for high-precision optical experiments and in particular in gravitational wave interferometry.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
Optical and mechanical properties of ion-beam-sputtered MgF$_2$ thin films for gravitational-wave interferometers
Authors:
M. Granata,
A. Amato,
M. Bischi,
M. Bazzan,
G. Cagnoli,
M. Canepa,
M. Chicoine,
A. Di Michele,
G. Favaro,
D. Forest,
G. M. Guidi,
G. Maggioni,
F. Martelli,
M. Menotta,
M. Montani,
F. Piergiovanni,
F. Schiettekatte
Abstract:
Brownian thermal noise associated with highly reflective coatings is a fundamental limit for several precision experiments, including gravitational-wave detectors. Research is currently ongoing to find coatings with low thermal noise that also fulfill strict optical requirements such as low absorption and scatter. We report on the optical and mechanical properties of ion-beam-sputtered magnesium f…
▽ More
Brownian thermal noise associated with highly reflective coatings is a fundamental limit for several precision experiments, including gravitational-wave detectors. Research is currently ongoing to find coatings with low thermal noise that also fulfill strict optical requirements such as low absorption and scatter. We report on the optical and mechanical properties of ion-beam-sputtered magnesium fluoride thin films, and we discuss the application of such coatings in current and future gravitational-wave detectors.
△ Less
Submitted 24 March, 2022; v1 submitted 2 November, 2021;
originally announced November 2021.
-
High resolution x-ray investigation of periodically poled lithium tantalate crystals with short periodicity
Authors:
Marco Bazzan,
Cinzia Sada,
Nicola Argiolas,
Alessandro C. Busacca,
Roberto L. Oliveri,
Salvatore Stivala,
Luciano Curcio,
Stefano Riva Sanseverino
Abstract:
Domain engineering technology in lithium tantalate is a well studied approach for nonlinear optical applications. However, for several cases of interest, the realization of short period structures (< 2 μm) is required, which make their characterization difficult with standard techniques. In this work, we show that high resolution x-ray diffraction is a convenient approach for the characterization…
▽ More
Domain engineering technology in lithium tantalate is a well studied approach for nonlinear optical applications. However, for several cases of interest, the realization of short period structures (< 2 μm) is required, which make their characterization difficult with standard techniques. In this work, we show that high resolution x-ray diffraction is a convenient approach for the characterization of such structures, allowing us to obtain in a nondestructive fashion information such as the average domain period, the domain wall inclination, and the overall structure quality.
△ Less
Submitted 24 September, 2012;
originally announced September 2012.
