Showing 1–4 of 4 results for author: Baykin, A N

An implicit level set algorithm for hydraulic fracturing with a stress-layer asymptote

Authors: A. V. Valov, E. V. Dontsov, A. N. Baykin, S. V. Golovin

Abstract: The capability to simulate a hydraulic fracturing process is an essential tool that can be used to optimize treatment design and increase the efficiency of field operations. In most practical cases, hydraulic fractures propagate in a multi-layered rock formation. As a result, there is a need to incorporate the effect of such heterogeneities in fracturing models to achieve an accurate prediction. T… ▽ More The capability to simulate a hydraulic fracturing process is an essential tool that can be used to optimize treatment design and increase the efficiency of field operations. In most practical cases, hydraulic fractures propagate in a multi-layered rock formation. As a result, there is a need to incorporate the effect of such heterogeneities in fracturing models to achieve an accurate prediction. To capture the layered structure of rocks, a hydraulic fracture simulator typically requires a fine mesh, which leads to a drastic reduction in computational performance. An alternative is to use more sophisticated models that are capable of providing reasonably accurate predictions even on a relatively coarse mesh. In the case of fracture growth modeling, the pivotal component of the simulation is a fracture front tracking algorithm that accounts for the layered structure of the formation. Consequently, this paper aims to extend the established Implicit Level Set Algorithm (ILSA) to account for the effect of multiple stress layers within the tip asymptote. The enhanced front tracking algorithm involves the stress-corrected asymptote that incorporates the influence of stress layers within the near-tip region. To further increase the validity region of the stress-corrected asymptote, the stress relaxation factor is introduced, and its accuracy is examined. The numerical algorithm is validated against the reference semi-analytical solutions as well as experimental observations. In addition, we investigate the sensitivity of the fracture geometry to mesh size to demonstrate that the front tracking algorithm based on the stress-corrected asymptote retains its accuracy on a coarse mesh. △ Less

Submitted 23 May, 2023; originally announced May 2023.

The coupling of an enhanced pseudo-3D model for hydraulic fracturing with a proppant transport model

Authors: Arthur M. Skopintsev, Egor V. Dontsov, Pavel V. Kovtunenko, Alexey N. Baykin, Sergey V. Golovin

Abstract: This paper presents the coupled model of a hydraulic fracturing and proppant transport. The former is described in terms of enhanced pseudo-3D model that considers height growth across two symmetric stress barriers, while the latter is given by two-dimensional transport model, stemming from the solution of an elliptical equation for fluid pressure and advection equation for the proppant transport.… ▽ More This paper presents the coupled model of a hydraulic fracturing and proppant transport. The former is described in terms of enhanced pseudo-3D model that considers height growth across two symmetric stress barriers, while the latter is given by two-dimensional transport model, stemming from the solution of an elliptical equation for fluid pressure and advection equation for the proppant transport. These two sub-modules are solved numerically using implicit time integration in hydraulic part and explicit time stepping in the transport part. In addition to that, interpolation is used to couple the two models with different grids. Results of several numerical simulations are presented for different configurations to demonstrate the interplay between these two modules. In particular, the developed coupled scheme allows us to study phenomena associated with complex fluid flow within the fracture, such as for the case of Saffman-Taylor instability. △ Less

Submitted 31 March, 2020; v1 submitted 12 March, 2020; originally announced March 2020.

Comments: Although the EP3D model was used in this study, the Planar3D model is a benchmark for engineering simulators that are currently being developed. Authors have understood how to represent the better agreement between results by both models, how to explain results in coupled model in more general sense, so we need to withdraw the manuscript and re-submit it in significantly updated form

Non-symmetry of a hydraulic fracture due to the inhomogeneity of the reservoir

Authors: Alexey N. Baykin, Sergey V. Golovin

Abstract: It is usually assumed that hydraulic fracture has two symmetrical wings with respect to the fluid injection point. Hence, authors limit themselves to modelling of one half of the fracture. In our work we demonstrate that the case of a symmetrical fracture occurs only in a homogeneous reservoir with constant physical parameters and confining {\it in situ} stress. Otherwise, inhomogeneity in the str… ▽ More It is usually assumed that hydraulic fracture has two symmetrical wings with respect to the fluid injection point. Hence, authors limit themselves to modelling of one half of the fracture. In our work we demonstrate that the case of a symmetrical fracture occurs only in a homogeneous reservoir with constant physical parameters and confining {\it in situ} stress. Otherwise, inhomogeneity in the stress or the rock permeability can significantly change the dynamics of the fracture propagation. The mathematical model of the hydraulic fracturing used in the paper is adopted from our earlier work \cite{Golovin_Baykin_2016_Pore}. In present paper we perform numerical experiments demonstrating that in case of non-constant confining stress or reservoir permeability the fracture is developing non-symmetrically. An important role is played by the action of the backstress that is formed near the fracture due to the pore pressure. To support this observation we give a formal definition of the backstress and compare the values of the backstress acting on the two different fracture wings. These numerical experiments underline the importance of the proper modelling of the interaction between pore and fracturing fluids for the correct simulation of the hydraulic fracturing. △ Less

Submitted 29 October, 2016; originally announced October 2016.

Influence of pore pressure to the development of a hydraulic fracture in poroelastic medium

Authors: Sergey V. Golovin, Alexey N. Baykin

Abstract: In this paper we demonstrate the influence of the pore pressure to the development of a hydraulically-driven fracture in a poroelastic medium. We present a novel numerical model for propagation of a planar hydraulic fracture and prove its correctness by demonstration of the numerical convergence and by comparison with known solutions. The advantage of the algorithm is that it does not require the… ▽ More In this paper we demonstrate the influence of the pore pressure to the development of a hydraulically-driven fracture in a poroelastic medium. We present a novel numerical model for propagation of a planar hydraulic fracture and prove its correctness by demonstration of the numerical convergence and by comparison with known solutions. The advantage of the algorithm is that it does not require the distinguishing of the fracture's tips and reconstruction of the numerical mesh according to the fracture propagation. Next, we perform a thorough analysis of the interplay of fluid filtration and redistribution of stresses near the fracture. We demonstrate that the fracture length decreases with the increase of the Biot's number (the parameter that determines the contribution of the pore pressure to the stress) and explain this effect by analysing the near-fracture pore pressure, rock deformation and stresses. We conclude, that the correct account for the fluid exchange between the fracture and the rock should be based not only on physical parameters of the rock and fluid, but also on the analysis of stresses near the fracture. △ Less

Submitted 29 August, 2016; originally announced August 2016.